- Users - oVirt List Archives

[Users] Re-targeting oVirt's first release to Feb 9th
by Ofer Schreiber 02 Feb '12

02 Feb '12

We're re-targeting oVirt's first release to February 9th. An official go/no-go meeting will take place in #ovirt irc channel, at 15:00UTC, February 7th. Thanks, The oVirt team

2 2

[Users] Ability to select and copy the Event stack in ovirt web gui
by Deepak C Shetty 01 Feb '12

01 Feb '12

Hi, What is the reason we cannot copy the event logs that we see in the bottom of the ovirt web gui ? It would be nice to have that feature... so that one can quickly send it to someone (maybe this list) and be able to express the sequence of things that happened while reporting a particular problem. I am using FF and no menu comes up, when i select all the events and right click, it would be good to support copy atleast... thanx, deepak

2 2

[Users] VDSM failing to start because iscsid fails to start
by Dave Allan 01 Feb '12

01 Feb '12

I just installed the engine and a few nodes from RPMs all on F16 per the instructions at: http://www.ovirt.org/wiki/Installing_ovirt-engine_from_rpm After installing the engine, I installed a few nodes by installing the minimal F16 package set + wget, configuring the ovirt repo on the nodes and using the 'New' button in the hosts tab of the engine GUI. The installation went fine, but after the nodes rebooted they were listed as non-reponsive. It turned out that VDSM was failing to start because iscsid was failing to start. I turned up the debug level on iscsid but didn't find any culprit. Manually force-starting iscsid and then manually starting the vdsm service caused the nodes to change status to Up. Anybody seen this or have any thoughts about what might be wrong? Dave

2 2

Re: [Users] Host discovery failing due to host network being lost
by Doron Fediuck 01 Feb '12

01 Feb '12

1. anything over 5mb shouldn't really be widely distributed... So it sounds right. 2. For similar issues we should consider pastebin or etherpad as well. Sent from my Android phone. Please ignore typos. -----Original Message----- From: Karsten 'quaid' Wade [kwade(a)redhat.com] Received: Wednesday, 01 Feb 2012, 1:00 To: users(a)ovirt.org Subject: Re: [Users] Host discovery failing due to host network being lost -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 01/31/2012 02:20 PM, Brown, Chris (GE Healthcare) wrote: > Last time I tried to send an attachment I found the limit to be > 40KB. Yes, that is the default. I just upped it to 5000KB. Hopefully that won't be a problem for anyone, and we should consider alternate ways to share files than this list if we find we need to regularly. (I think 100+KB log files are fine for the list, fwiw.) BTW, if anyone is interested in helping administrate this list, I'm always looking to spread the responsibility. If you haven't admin'd a Mailman list before, this is a good opportunity to learn. - - Karsten > > -----Original Message----- From: users-bounces(a)ovirt.org > [mailto:users-bounces@ovirt.org] On Behalf Of Carl Trieloff Sent: > Tuesday, January 31, 2012 4:14 PM To: Itamar Heim Cc: > users(a)ovirt.org Subject: Re: [Users] Host discovery failing due to > host network being lost > > On 01/31/2012 05:14 PM, Itamar Heim wrote: >> what is the current limit? 114KB means even a screen shot won't >> pass through. > > Don't know who all is admin on user list to look -- Karsten? > > Carl. _______________________________________________ Users mailing > list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users > _______________________________________________ Users mailing list > Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users - -- name: Karsten 'quaid' Wade, Sr. Community Architect team: Red Hat Community Architecture & Leadership uri: http://communityleadershipteam.org http://TheOpenSourceWay.org gpg: AD0E0C41 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iD8DBQFPKHKU2ZIOBq0ODEERAo+RAJ0TyklGtReMXQDHpHfYpx8eSeYkMgCgwCyT 104W6iWjhZKiVW3u7WpHiJM= =7bVI -----END PGP SIGNATURE----- _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users Sent from my Android phone. Please ignore typos.

1 0

[Users] Host discovery failing due to host network being lost
by Deepak C Shetty 01 Feb '12

01 Feb '12

Hi ovirt users, I was trying to check on IRC the below, did not get any replies, so sending this mail. Can someone help me understand what could be the issue that causing my managed host to lose network settings, when i try to discover it from ovirt-engine ? I have to then manually (using a remote console) re-setup the network.. it even overrites my ifcfg-eth0 file I see a new bridge getting added called ovirtmgmt and route entry corr. to that.. the ifcfg-eth0 also has that entry I feel that ovirt scripts running on the host should atleast take a backup of the ifcfg* files they modify so that in case of issues like these, user can login via remote console and restore the original ifcfg file. This is what i asked on IRC... responses appreciated... deepakcs> Hello, i just configured ovirt-engine and discovering my first managed host.. got some Qs <deepakcs> what diff does it make when i select "override ip tables" check box during new Host workflow ? * djasa has quit (Ping timeout: 480 seconds) <deepakcs> this is the second time i am discovering this host and everytime the host discovery hangs during "Installing" and if i check the host, it goes out of network.... has anybody faced this problem before ? <deepakcs> While discovering the host, the host network ipv4 address is gone ! and thus the host goes out of network Some more updates.. 1) I manually re-setup the host network, made it pingable, esp from the ovirt-engine node, and clicked on Re-install on the web gui, this time with the 'override ip tables' check enabled 2) this time it successfully completed the node bootstrap steps (as seen from the Events window) and status was Reboot 3) But after reboot the same thing happened.. the host lost ipv4 addr, route entries are completely gone and onthe web gui the host is seen as non-responsive, which is expected bcos the host is not on the network anymore... what is the reason the above is happening ?

7 18

[Users] Minutes from Go/No-Go meeting 2012-01-30
by Mike Burns 30 Jan '12

30 Jan '12

Minutes: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-01-30-15.01.html Minutes (text): http://ovirt.org/meetings/ovirt/2012/ovirt.2012-01-30-15.01.txt Log: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-01-30-15.01.log.html Quick summary: Issues across multiple packages will cause a delay in the release. Thanks Mike

1 0

[Users] oVirt First Release Delay
by Ofer Schreiber 30 Jan '12

30 Jan '12

Due to several issues raised in the release meeting today [1], we're postponing oVirt's first release. We will re-evaluate the release date on Wednesday, during the weekly irc meeting. Thanks, The oVirt team [1] Release meeting minutes can be found at: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-01-30-15.01.html

1 0

[Users] New oVirt-engine RPMs available - Release Candidates
by Ofer Schreiber 30 Jan '12

30 Jan '12

Hi all, We've just finished uploading a new set of oVirt-engine rpms into ovirt.org. These rpms, versioned 3.0.0_0001-1.4, are considered as release candidates for our first release. In order to install the RPMs, please follow the instructions described in http://www.ovirt.org/wiki/Installing_ovirt_from_rpm Feedback, comments and bug reports are always welcome. The oVirt-Engine team

7 9

[Users] New oVirt Node pakages and image available -- Release Candidates
by Mike Burns 29 Jan '12

29 Jan '12

We've just uploaded ovirt-node-2.2.2 RPMs and ISO image to ovirt.org. This is the Release Candidate for the first oVirt Project release. Feedback, comments, and bug reports are welcome as always. Release Notes and Known issues are at: http://ovirt.org/wiki/Node_Release_Notes#2.2.2_Release_Notes Links to packages and image are here: http://ovirt.org/wiki/Category:Node#Current_Release Thanks The Node Team -- Michael Burns Software Engineer, Cloud Infrastructure Tech Lead, oVirt Node, RHEV-H Red Hat mburns(a)redhat.com

1 0

[Users] ovirt fails to start vm on EL based nodes
by Brown, Chris (GE Healthcare) 27 Jan '12

27 Jan '12

This is a multi-part message in MIME format. ------_=_NextPart_001_01CCDC7C.033AF09A Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable The ovirt engine is failing to start virtual machines on EL based nodes. I think I have found the failure mode. The engine log shows: 2012-01-26 16:01:45,200 INFO [org.ovirt.engine.core.vdsbroker.CreateVmVDSCommand] (pool-5-thread-48) FINISH, CreateVmVDSCommand, return: WaitForLaunch, log id: d1649a2 2012-01-26 16:01:45,953 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.DestroyVDSCommand] (QuartzScheduler_Worker-89) START, DestroyVDSCommand(vdsId =3D e7df9be0-47a0-11e1-80f3-00144f8d7c32, vmId=3D6c84897b-4d2b-461b-ab64-b30bf9ff7b22, force=3Dfalse, = secondsToWait=3D0, gracefully=3Dfalse), log id: 1269b196 2012-01-26 16:01:45,997 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.DestroyVDSCommand] (QuartzScheduler_Worker-89) FINISH, DestroyVDSCommand, log id: 1269b196 p012-01-26 16:01:46,020 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (QuartzScheduler_Worker-89) Running on vds during rerun failed vm: null 2012-01-26 16:01:46,028 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (QuartzScheduler_Worker-89) vm winxp running in db and not running in vds - add to rerun treatment. vds kvmsrv03 2012-01-26 16:01:46,042 ERROR [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (QuartzScheduler_Worker-89) Rerun vm 6c84897b-4d2b-461b-ab64-b30bf9ff7b22. Called from vds kvmsrv03 =20 On the EL node in libvirt.log in the <os> </os>section we see: *unnecessary output surpressed* <os> <type arch=3D"x86_64" machine=3D"pc-0.14">hvm</type> <boot dev=3D"cdrom"/> <boot dev=3D"hd"/> <smbios mode=3D"sysinfo"/> </os> , flags=3D0 16:25:42.074: 10537: error : virNetClientProgramDispatchError:170 : internal error process exited while connecting to monitor: Supported machines are: pc RHEL 6.2.0 PC (alias of rhel6.2.0) rhel6.2.0 RHEL 6.2.0 PC (default) rhel6.1.0 RHEL 6.1.0 PC rhel6.0.0 RHEL 6.0.0 PC rhel5.5.0 RHEL 5.5.0 PC rhel5.4.4 RHEL 5.4.4 PC rhel5.4.0 RHEL 5.4.0 PC =20 Thus output of qemu-kvm on the EL node is: [root@kvmsrv03 ~]# /usr/libexec/qemu-kvm -M ? Supported machines are: pc RHEL 6.2.0 PC (alias of rhel6.2.0) rhel6.2.0 RHEL 6.2.0 PC (default) rhel6.1.0 RHEL 6.1.0 PC rhel6.0.0 RHEL 6.0.0 PC rhel5.5.0 RHEL 5.5.0 PC rhel5.4.4 RHEL 5.4.4 PC rhel5.4.0 RHEL 5.4.0 PC =20 And the output on a Fedora 16 node is: [root@vmdev ~]# qemu-kvm -M ? Supported machines are: pc Standard PC (alias of pc-0.14) pc-0.14 Standard PC (default) fedora-13 Standard PC pc-0.13 Standard PC pc-0.12 Standard PC pc-0.11 Standard PC, qemu 0.11 pc-0.10 Standard PC, qemu 0.10 isapc ISA-only PC =20 Thus it appears that ovirt-engine is passing an un-recognized = "machine=3D" type when running on an EL node. =20 - Chris ------_=_NextPart_001_01CCDC7C.033AF09A Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" = xmlns:o=3D"urn:schemas-microsoft-com:office:office" = xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" = xmlns=3D"http://www.w3.org/TR/REC-html40"><head><meta = http-equiv=3DContent-Type content=3D"text/html; = charset=3Dus-ascii"><meta name=3DGenerator content=3D"Microsoft Word 12 = (filtered medium)"><style></style></head><body lang=3DEN-US link=3Dblue = vlink=3Dpurple><div class=3DWordSection1>The ovirt = engine is failing to start virtual machines on EL based = nodes.<o:p></o:p>I think I have found the = failure mode.<o:p></o:p>The engine log = shows:<o:p></o:p>2012-01-26 16:01:45,200 = INFO  [org.ovirt.engine.core.vdsbroker.CreateVmVDSCommand] = (pool-5-thread-48) FINISH, CreateVmVDSCommand, return: WaitForLaunch, = log id: d1649a2<o:p></o:p>2012-01-26 = 16:01:45,953 INFO  = [org.ovirt.engine.core.vdsbroker.vdsbroker.DestroyVDSCommand] = (QuartzScheduler_Worker-89) START, DestroyVDSCommand(vdsId =3D = e7df9be0-47a0-11e1-80f3-00144f8d7c32, = vmId=3D6c84897b-4d2b-461b-ab64-b30bf9ff7b22, force=3Dfalse, = secondsToWait=3D0, gracefully=3Dfalse), log id: = 1269b196<o:p></o:p>2012-01-26 16:01:45,997 = INFO  [org.ovirt.engine.core.vdsbroker.vdsbroker.DestroyVDSCommand] = (QuartzScheduler_Worker-89) FINISH, DestroyVDSCommand, log id: = 1269b196<o:p></o:p>p012-01-26 16:01:46,020 = INFO  [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] = (QuartzScheduler_Worker-89) Running on vds during rerun failed vm: = null<o:p></o:p>2012-01-26 16:01:46,028 = INFO  [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] = (QuartzScheduler_Worker-89) vm winxp running in db and not running in = vds - add to rerun treatment. vds kvmsrv03<o:p></o:p>2012-01-26 16:01:46,042 ERROR = [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] = (QuartzScheduler_Worker-89) Rerun vm = 6c84897b-4d2b-461b-ab64-b30bf9ff7b22. Called from vds = kvmsrv03<o:p></o:p><o:p> </o:p>On the EL node in libvirt.log in the <os> = </os>section we see:<o:p></o:p>*unnecessary output = surpressed*<o:p></o:p>         &= nbsp;      <os><o:p></o:p>         &= nbsp;           &n= bsp;          <type = arch=3D"x86_64" = machine=3D"pc-0.14">hvm</type><o:p></o:p>         &= nbsp;           &n= bsp;          <boot = dev=3D"cdrom"/><o:p></o:p>         &= nbsp;           &n= bsp;          <boot = dev=3D"hd"/><o:p></o:p>         &= nbsp;           &n= bsp;          <smbios = mode=3D"sysinfo"/><o:p></o:p>         &= nbsp;      </os><o:p></o:p>, flags=3D0<o:p></o:p>16:25:42.074: 10537: error : = virNetClientProgramDispatchError:170 : internal error process exited = while connecting to monitor: Supported machines are:<o:p></o:p>pc         = RHEL 6.2.0 PC (alias of rhel6.2.0)<o:p></o:p>rhel6.2.0  RHEL 6.2.0 PC = (default)<o:p></o:p>rhel6.1.0  RHEL 6.1.0 = PC<o:p></o:p>rhel6.0.0  RHEL 6.0.0 = PC<o:p></o:p>rhel5.5.0  RHEL 5.5.0 = PC<o:p></o:p>rhel5.4.4  RHEL 5.4.4 = PC<o:p></o:p>rhel5.4.0  RHEL 5.4.0 = PC<o:p></o:p><o:p> </o:p>Thus output of qemu-kvm on the EL node = is:<o:p></o:p>[root@kvmsrv03 ~]# = /usr/libexec/qemu-kvm -M ?<o:p></o:p>Supported = machines are:<o:p></o:p>pc         = RHEL 6.2.0 PC (alias of rhel6.2.0)<o:p></o:p>rhel6.2.0  RHEL 6.2.0 PC = (default)<o:p></o:p>rhel6.1.0  RHEL 6.1.0 = PC<o:p></o:p>rhel6.0.0  RHEL 6.0.0 = PC<o:p></o:p>rhel5.5.0  RHEL 5.5.0 = PC<o:p></o:p>rhel5.4.4  RHEL 5.4.4 = PC<o:p></o:p>rhel5.4.0  RHEL 5.4.0 = PC<o:p></o:p><o:p> </o:p>And the output on a Fedora 16 node = is:<o:p></o:p>[root@vmdev ~]# qemu-kvm -M = ?<o:p></o:p>Supported machines = are:<o:p></o:p>pc         = Standard PC (alias of pc-0.14)<o:p></o:p>pc-0.14    Standard PC = (default)<o:p></o:p>fedora-13  Standard = PC<o:p></o:p>pc-0.13    Standard = PC<o:p></o:p>pc-0.12    Standard = PC<o:p></o:p>pc-0.11    Standard = PC, qemu 0.11<o:p></o:p>pc-0.10    Standard PC, qemu = 0.10<o:p></o:p>isapc      ISA-only = PC<o:p></o:p><o:p> </o:p>Thus it appears that ovirt-engine is passing an = un-recognized "machine=3D" type when running on an EL = node.<o:p></o:p><o:p> </o:p>- Chris<o:p></o:p></div></body></html> ------_=_NextPart_001_01CCDC7C.033AF09A--

3 5