- Users - oVirt List Archives

fresh ovirt node 4.4.6 fail on firewalld both host and engine deployment
by Charles Kozler 09 Jun '21

09 Jun '21

Hello - Deployed fresh ovirt node 4.4.6 and the only thing I did to the system was configure the NIC with nmtui During the gluster install the install errored out with gluster-deployment-1620832547044.log:failed: [n2] (item=5900/tcp) => {"ansible_loop_var": "item", "changed": false, "item": "5900/tcp", "msg": "ERROR: Exception caught: org.fedoraproject.FirewallD1.Exception: ALREADY_ENABLED: '5900:tcp' already in 'public' Permanent and Non-Permanent(immediate) operation"} The fix here was easy - I just deleted the port it was complaining about with firewall-cmd and restarted the installation and it was all fine During the hosted engine deployment when the VM is being deployed it dies here [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Open a port on firewalld] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "ERROR: Exception caught: org.fedoraproject.FirewallD1.Exception: ALREADY_ENABLED: '6900:tcp' already in 'public' Non-permanent operation"} Now the issue here is that I do not have access to the engine VM as it is in a bit of a transient state since when it fails the current image that is open is discarded when the ansible playbook is kicked off again I cannot find any BZ on this and google is turning up nothing. I don't think firewalld failing due to the firewall rule already existing should be a reason to exit the installation The interesting part is that this only fails on certain ports. i.e when I reran the gluster wizard after 5900 failed, the other ports are presumably still added to the firewall, and the installation completes Suggestions? -- *Notice to Recipient*: https://www.fixflyer.com/disclaimer <https://www.fixflyer.com/disclaimer>

5 6

Update of plain CentOS hosts very slow
by Gianluca Cecchi 09 Jun '21

09 Jun '21

Hello, I have a 4.4.5 environment that I'm upgrading to 4.4.6. I'm upgrading plain CentOS hosts from the GUI. They are in 4.4.5, so in particular CentOS 8.3 and as part of the upgrade they have to be put to 8.4. In the past I used "yum update" on the host but now it seems it is not the correct way. But the ansible part related to package updates seems to be very slow. It gives the impression that it is doing it one by one and not as a whole when you run "yum update" Now it is about 30 minutes that the update is going on and my internet speed is for sure very high. In messages of host I see every single line suche this ones: Jun 8 11:09:30 ov300 python3[3031815]: ansible-dnf Invoked with name=['rsyslog-relp.x86_64'] state=latest lock_timeout=300 conf_file=/tmp/yum.conf allow_downgrade=False autoremove=False bugfix=False disable_gpg_check=False disable_plugin=[] disablerepo=[] download_only=False enable_plugin=[] enablerepo=[] exclude=[] installroot=/ install_repoquery=True install_weak_deps=True security=False skip_broken=False update_cache=False update_only=False validate_certs=True disable_excludes=None download_dir=None list=None releasever=None Jun 8 11:09:32 ov300 python3[3031828]: ansible-dnf Invoked with name=['runc.x86_64'] state=latest lock_timeout=300 conf_file=/tmp/yum.conf allow_downgrade=False autoremove=False bugfix=False disable_gpg_check=False disable_plugin=[] disablerepo=[] download_only=False enable_plugin=[] enablerepo=[] exclude=[] installroot=/ install_repoquery=True install_weak_deps=True security=False skip_broken=False update_cache=False update_only=False validate_certs=True disable_excludes=None download_dir=None list=None releasever=None Any clarification? Thanks, Gianluca

2 5

Rootless Podman container not displaying in oVirt Manager
by David White 09 Jun '21

09 Jun '21

I deployed a rootless Podman container on a RHEL 8 guest on Saturday (3 days ago). At the time, I remember seeing some selinux AVC "denied" messages related to qemu-guest-agent and podman, but I didn't have time to look into it further, but made a mental note to come back to it, because it really smelled like a bug to me. So, I came back to it this afternoon, and now I see nothing when I look for `ausearch -m AVC` I restarted the `quemu-guest-agent` service with systemctl, and ran `ausearch -m AVC` again, hoping to see some results, but I still don't. I really wish that I had at least copied the AVC message I saw on Saturday for later investigation, but I fully expected to be able to find that information again today. Regardless, I have a rootless container running on the guest VM. When I login to the oVirt Manager and navigate to the VM -> Containers, I don't see anything listed. On Saturday, I thought this was a bug with selinux and qemu-guest-agent. But now, I have no idea. Any thoughts? Sent with ProtonMail Secure Email.

2 1

Booting VMs from RHEL ISOs fail
by David White 09 Jun '21

09 Jun '21

Ever since I deployed oVirt a couple months ago, I've been unable to boot any VMs from a RHEL ISO. Ubuntu works fine, as does CentOS. I've tried multiple RHEL 8 ISOs on multiple VMs. I've destroyed and re-uploaded the ISOs, and I've also destroyed and re-created the VMs. Every time I try to boot a VM to a RHEL 8 ISO, the console just tells me that "No boot device" was found. Can anyone think of any reason why other ISOs would work, when RHEL ISOs do not work? How can I troubleshoot this further? I really need to get a server up and running with Podman. Sent with ProtonMail Secure Email.

4 10

4.3 engine cert
by KSNull Zero 09 Jun '21

09 Jun '21

Hello! oVirt 4.3 engine.cer is about to expire. What is the proper way to renew it, so there is no impact on the running hosts and workloads ? Thank you.

2 3

ovirt engine 4.4.6.8-1.el8 Connection to ovirt-imageio-proxy service has failed. Make sure the service is installed, configured, and ovirt-engine certificate is registered as a valid CA in the browser.
by dhanaraj.ramesh＠yahoo.com 08 Jun '21

08 Jun '21

recently upgraded ovirt engine to latest 4.4.6.8-1.el8 but unfortunately ovirt-imageio-proxy service has failed after upgrade. unable to upload iso, vdisks to the storage domains. need help on this, I beleive this is on going issues but hopefully can be fixed with workaround

3 5

Ovirt node 4.4.5 failure to upgrade to 4.4.6
by Guillaume Pavese 08 Jun '21

08 Jun '21

Maybe my problem is in part linked to an issue seen by Jayme earlier, but then the resolution that worked for him did not succeed for me : I first upgraded my Self Hosted Engine from 4.4.5 to 4.4.6 and then upgraded it to Centos-Stream and rebooted Then I tried to upgrade the cluster (3 ovirt-nodes on 4.4.5) but it failed at the first host. They are all ovir-node hosts, originally first installed in 4.4.5 In Host Event Logs I saw : ... Update of host ps-inf-prd-kvm-fr-510.hostics.fr. Upgrade packages Update of host ps-inf-prd-kvm-fr-510.hostics.fr. Check if image was updated. Update of host ps-inf-prd-kvm-fr-510.hostics.fr. Check if image was updated. Update of host ps-inf-prd-kvm-fr-510.hostics.fr. Check if image-updated file exists. Failed to upgrade Host ps-inf-prd-kvm-fr-510.hostics.fr (User: gpav(a)hostics.fr) ovirt-node-ng-image-update-4.4.6.3-1.el8.noarch was installed according to yum, I tried reinstalling it but got errors: "Error in POSTIN scriptlet" : Downloading Packages: [SKIPPED] ovirt-node-ng-image-update-4.4.6.3-1.el8.noarch.rpm: Already downloaded ... Running scriptlet: ovirt-node-ng-image-update-4.4.6.3-1.el8.noarch Reinstalling : ovirt-node-ng-image-update-4.4.6.3-1.el8.noarch Running scriptlet: ovirt-node-ng-image-update-4.4.6.3-1.el8.noarch warning: %post(ovirt-node-ng-image-update-4.4.6.3-1.el8.noarch) scriptlet failed, exit status 1 Error in POSTIN scriptlet in rpm package ovirt-node-ng-image-update --- Reinstalled: ovirt-node-ng-image-update-4.4.6.3-1.el8.noarch nodectl still showed it was on 4.4.5 : [root@ps-inf-prd-kvm-fr-510 ~]# nodectl info bootloader: default: ovirt-node-ng-4.4.5.1-0.20210323.0 (4.18.0-240.15.1.el8_3.x86_64) ... current_layer: ovirt-node-ng-4.4.5.1-0.20210323.0+1 I tried to upgrade the Host again from oVirt and this time there was no error, and the host rebooted. However, it did not pass active after rebooting and nodectl still shows that it's 4.4.5 installed. Similar symptoms as OP So I removed ovirt-node-ng-image-update, then reinstalled it and got no error this time. nodectl info seemed to show that it was installed : [root@ps-inf-prd-kvm-fr-510 yum.repos.d]# nodectl info bootloader: default: ovirt-node-ng-4.4.6.3-0.20210518.0 (4.18.0-301.1.el8.x86_64) ... current_layer: ovirt-node-ng-4.4.5.1-0.20210323.0+1 However, after reboot the Host was still shown as "unresponsive" After Marking it as "Manually rebooted", passing it in maintenance mode and trying to activate it, the Host was automatically fenced. And still unresponsive after this new reboot. I passed it in maintenance mode again, And tried to reinstall it with "Deploy Hosted Engine" selected However if failed : "Task Stop services failed to execute." In /var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20210602082519-ps-inf-prd-kvm-fr-510.hostics.fr-0565d681-9406-4fa7-a444-7ee34804579c.log : "msg" : "Unable to stop service vdsmd.service: Job for vdsmd.service canceled.\n", "failed" : true, "msg" : "Unable to stop service supervdsmd.service: Job for supervdsmd.service canceled.\n", failed" : true, "stderr" : "Error: ServiceOperationError: _systemctlStop failed\nb'Job for vdsmd.service canceled.\\n' ", "stderr_lines" : [ "Error: ServiceOperationError: _systemctlStop failed", "b'Job for vdsmd.service canceled.\\n' " ], If I try on the Host I get : [root@ps-inf-prd-kvm-fr-510 ~]# systemctl stop vdsmd Job for vdsmd.service canceled. [root@ps-inf-prd-kvm-fr-510 ~]# systemctl status vdsmd ● vdsmd.service - Virtual Desktop Server Manager Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled; vendor preset: disabled) Active: deactivating (stop-sigterm) since Wed 2021-06-02 08:49:21 CEST; 7s ago Process: 54037 ExecStartPre=/usr/libexec/vdsm/vdsmd_init_common.sh --pre-start (code=exited, status=0/SUCCESS) ... Jun 02 08:47:34 ps-inf-prd-kvm-fr-510.hostics.fr vdsm[54100]: WARN Failed to retrieve Hosted Engine HA info, is Hosted Engine setup finished? ... Jun 02 08:48:31 ps-inf-prd-kvm-fr-510.hostics.fr vdsm[54100]: WARN Worker blocked: <Worker name=jsonrpc/4 running <Task <JsonRpcTask {'jsonrpc': '2.0', 'method': 'StoragePool.connectStorageServer', 'params': {'storage> File: "/usr/lib64/python3.6/threading.py", line 884, in _bootstrap self._bootstrap_inner() Retrying to manually stop vdsmd a second time then seems to work... I tried rebooting again, restarting the install always fail at the the same spot What should I try to get this host back up? Guillaume Pavese Ingénieur Système et Réseau Interactiv-Group -- Ce message et toutes les pièces jointes (ci-après le “message”) sont établis à l’intention exclusive de ses destinataires et sont confidentiels. Si vous recevez ce message par erreur, merci de le détruire et d’en avertir immédiatement l’expéditeur. Toute utilisation de ce message non conforme a sa destination, toute diffusion ou toute publication, totale ou partielle, est interdite, sauf autorisation expresse. L’internet ne permettant pas d’assurer l’intégrité de ce message . Interactiv-group (et ses filiales) décline(nt) toute responsabilité au titre de ce message, dans l’hypothèse ou il aurait été modifié. IT, ES, UK. <https://interactiv-group.com/disclaimer.html>

4 5

ovirt 4 live migration problem
by david 07 Jun '21

07 Jun '21

engine 4.4.4.7-1.el8 can someone explain to me what is the problem, when i try to migrate some vms to another host in the cluster the migration status reaches the percent of 99 and this error message appears: +-------------------------+ Failed to migrate VM scom1-a66 to Host kvm3 No available host was found to migrate VM scom1-a66 to. Trying to migrate to another Host. +-------------------------+ i have attached engine.log where the last problematic correlation is d448f6ad-c549-4f72-b3da-bed927f32b23 i have two node cluster the servers(kvm4 and kvm3) in the cluster have a different hardware configuration and kvm version also attached virsh-capabilities and vdsm.log from them the strangest thing is that in the logs there is no reason at all why the migration failed. at least i didn't find anything kvm4 ==== OS Version: RHEL - 8.3 - 1.2011.el8 Kernel Version: 4.18.0 - 240.1.1.el8_3.x86_64 KVM Version: 5.1.0 - 14.el8.1 LIBVIRT Version: libvirt-6.6.0-7.1.el8 VDSM Version: vdsm-4.40.40-1.el8 SPICE Version: 0.14.3 - 3.el8 kvm3 ==== OS Version: RHEL - 8.4 - 1.2105.el8 Kernel Version: 4.18.0 - 305.3.1.el8.x86_64 KVM Version: 5.1.0 - 20.el8 LIBVIRT Version: libvirt-6.6.0-13.el8 VDSM Version: vdsm-4.40.60.7-1.el8 SPICE Version: 0.14.3 - 4.el8

1 0

I am installing ovirt engine 4.3.10
by ken＠everheartpartners.com 07 Jun '21

07 Jun '21

I am getting this error message when I install it on CentOS 7.9 when running the hosted engine setup. [ INFO ] TASK [ovirt.hosted_engine_setup : Validate selected bridge interface if management bridge does not exists] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The selected network interface is not valid"} I have two interfaces enp6s0 enp11s0 Enp11s0 is the public network enp6s0 is the storage network to the netapp. Any idea how to resolve this?

3 2

Fedora CoreOS
by lejeczek 07 Jun '21

07 Jun '21

Hi guys. From what I gather there is no oVirt for Fedora CoreOS but I should ask here at the source - is it there oVirt for that OS and if there is not as of now, are the any plans or discussion to make that reality? many thanks, L.

2 1