- Users - oVirt List Archives

Re: Gluster Geo-Replication Fails
by Strahil Nikolov 18 May '21

18 May '21

Now to make it perfect , leave it running and analyze the AVCs with semanage. In the end SELINUX will remain working and geo-rep should be running also. I've previously tried the rpm generated from https://github.com/gluster/glusterfs-selinux but it didn't help at that time. If possible, give it a try. Best Regards,Strahil Nikolov On Tue, May 18, 2021 at 16:09, Simon Scott<simon(a)justconnect.ie> wrote: _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/GB23MBKEQKZNK…

1 0

Re: oVirt deploy new HE Host problem
by Yedidyah Bar David 18 May '21

18 May '21

On Mon, May 17, 2021 at 10:34 AM Marko Vrgotic <M.Vrgotic(a)activevideo.com> wrote: > > Hi gentleman, > > > > Hope you had a great weekend. > > Can I assume that you will be able to look into log files this week ? > > > > As per Yedidyah’s comment, I stopped troubleshooting . > > > > Kindly awaiting your reply. Hi Marko, Please upload somewhere all of /var/log from all hosts and the engine, and share a link. Thanks. In particular, you didn't include 'hosted-engine --deploy' logs from /var/log/ovirt-hosted-engine-setup. Also: the attached ovirt-host-deploy log indicates this is on 4.3, which is EOL and unsupported. Best regards, -- Didi

2 1

Gluster Geo-Replication Fails
by simon＠justconnect.ie 18 May '21

18 May '21

Hi All, I have to sites each with 2 x 3 Node clusters. oVirt 4.4.5 with GlusterFS 8.4. On Site A I have a Replica 3 + Arbiter volume that I want to geo-replicate to Site B. I've setup a Replica 3 + Arbiter volume on Site B. All password-less ssh requirements are in place and the Geo-Replication Session has been created successfully. I issue the 'Start' command successfully but the status switches between 'Initializing', 'Active' & 'Failed' within 20 seconds constantly. Can anyone point me in the direction to get this up and running as it is our proposed DR solution. Kind Regards Shimme

3 3

poweroff and reboot with ovirt_vm ansible module
by Nathanaël Blanchet 18 May '21

18 May '21

Hello, is there a way to poweroff or reboot (without stopped and running state) a vm with the ovirt_vm ansible module? -- Nathanaël Blanchet Supervision réseau Pôle Infrastrutures Informatiques 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr

7 11

[ANN] Async release for oVirt 4.4.6
by Lev Veyde 18 May '21

18 May '21

oVirt 4.4.6 Async update #3 On May 18th 2021 the oVirt project released an async update to the following packages: - Vdsm 4.40.60.7 - oVirt Node 4.4.6.3 Fixing the following bugs: - Bug 1959945 <https://bugzilla.redhat.com/show_bug.cgi?id=1959945> - [NBDE] RHVH 4.4.6 host fails to startup, without prompting for passphrase - Bug 1955571 <https://bugzilla.redhat.com/show_bug.cgi?id=1955571> - Verify if we still need to omit ifcfg and clevis dracut modules for properly working bridged network - Bug 1950209 <https://bugzilla.redhat.com/show_bug.cgi?id=1950209> - Leaf images used by the VM is deleted by the engine during snapshot merge oVirt Node Changes: - Consume above oVirt updates - Updated to Gluster 8.5 <https://docs.gluster.org/en/latest/release-notes/8.5/> Full diff list: --- ovirt-node-ng-image-4.4.6.2.manifest-rpm 2021-05-14 08:58:12.581488678 +0200 +++ ovirt-node-ng-image-4.4.6.3.manifest-rpm 2021-05-18 13:09:07.858527812 +0200 @@ -220,7 +220,7 @@ -glusterfs-8.4-1.el8.x86_64 -glusterfs-cli-8.4-1.el8.x86_64 -glusterfs-client-xlators-8.4-1.el8.x86_64 -glusterfs-events-8.4-1.el8.x86_64 -glusterfs-fuse-8.4-1.el8.x86_64 -glusterfs-geo-replication-8.4-1.el8.x86_64 -glusterfs-server-8.4-1.el8.x86_64 +glusterfs-8.5-1.el8.x86_64 +glusterfs-cli-8.5-1.el8.x86_64 +glusterfs-client-xlators-8.5-1.el8.x86_64 +glusterfs-events-8.5-1.el8.x86_64 +glusterfs-fuse-8.5-1.el8.x86_64 +glusterfs-geo-replication-8.5-1.el8.x86_64 +glusterfs-server-8.5-1.el8.x86_64 @@ -383,6 +383,6 @@ -libgfapi0-8.4-1.el8.x86_64 -libgfchangelog0-8.4-1.el8.x86_64 -libgfrpc0-8.4-1.el8.x86_64 -libgfxdr0-8.4-1.el8.x86_64 -libglusterd0-8.4-1.el8.x86_64 -libglusterfs0-8.4-1.el8.x86_64 +libgfapi0-8.5-1.el8.x86_64 +libgfchangelog0-8.5-1.el8.x86_64 +libgfrpc0-8.5-1.el8.x86_64 +libgfxdr0-8.5-1.el8.x86_64 +libglusterd0-8.5-1.el8.x86_64 +libglusterfs0-8.5-1.el8.x86_64 @@ -643 +643 @@ -ovirt-node-ng-image-update-placeholder-4.4.6.2-1.el8.noarch +ovirt-node-ng-image-update-placeholder-4.4.6.3-1.el8.noarch @@ -651,2 +651,2 @@ -ovirt-release-host-node-4.4.6.2-1.el8.noarch -ovirt-release44-4.4.6.2-1.el8.noarch +ovirt-release-host-node-4.4.6.3-1.el8.noarch +ovirt-release44-4.4.6.3-1.el8.noarch @@ -754 +754 @@ -python3-gluster-8.4-1.el8.x86_64 +python3-gluster-8.5-1.el8.x86_64 @@ -940,15 +940,15 @@ -vdsm-4.40.60.6-1.el8.x86_64 -vdsm-api-4.40.60.6-1.el8.noarch -vdsm-client-4.40.60.6-1.el8.noarch -vdsm-common-4.40.60.6-1.el8.noarch -vdsm-gluster-4.40.60.6-1.el8.x86_64 -vdsm-hook-ethtool-options-4.40.60.6-1.el8.noarch -vdsm-hook-fcoe-4.40.60.6-1.el8.noarch -vdsm-hook-openstacknet-4.40.60.6-1.el8.noarch -vdsm-hook-vhostmd-4.40.60.6-1.el8.noarch -vdsm-hook-vmfex-dev-4.40.60.6-1.el8.noarch -vdsm-http-4.40.60.6-1.el8.noarch -vdsm-jsonrpc-4.40.60.6-1.el8.noarch -vdsm-network-4.40.60.6-1.el8.x86_64 -vdsm-python-4.40.60.6-1.el8.noarch -vdsm-yajsonrpc-4.40.60.6-1.el8.noarch +vdsm-4.40.60.7-1.el8.x86_64 +vdsm-api-4.40.60.7-1.el8.noarch +vdsm-client-4.40.60.7-1.el8.noarch +vdsm-common-4.40.60.7-1.el8.noarch +vdsm-gluster-4.40.60.7-1.el8.x86_64 +vdsm-hook-ethtool-options-4.40.60.7-1.el8.noarch +vdsm-hook-fcoe-4.40.60.7-1.el8.noarch +vdsm-hook-openstacknet-4.40.60.7-1.el8.noarch +vdsm-hook-vhostmd-4.40.60.7-1.el8.noarch +vdsm-hook-vmfex-dev-4.40.60.7-1.el8.noarch +vdsm-http-4.40.60.7-1.el8.noarch +vdsm-jsonrpc-4.40.60.7-1.el8.noarch +vdsm-network-4.40.60.7-1.el8.x86_64 +vdsm-python-4.40.60.7-1.el8.noarch +vdsm-yajsonrpc-4.40.60.7-1.el8.noarch -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

Ovirt Engine -- Connection Refused to all hosts
by Nick Polites 18 May '21

18 May '21

Hi All, I am not sure if my original post is being reviewed before posting but trying again in case it failed to send. I tried logging in this morning to oVrit and see that all of my hosts are unresponsive. I am seeing a connection refused error in the engine logs. I am able to SSH and ping the host from the engine. Any help would be appreciated. 2021-05-15 15:19:21,041Z ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesAsyncVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-65) [] Command 'GetCapabilitiesAsyn cVDSCommand(HostName = hlkvm03, VdsIdAndVdsVDSCommandParametersBase:{hostId='2186eca7-4d9d-482f-b1b7-b63ac46b96aa', vds='Host[hlkvm03,2186eca7-4d9d-482f-b1b7 -b63ac46b96aa]'})' execution failed: java.net.ConnectException: Connection refused ~

3 2

Migrating VMs with templates from 4.2.8 to new 4.4.6 instance
by Pavel Strzinek 17 May '21

17 May '21

Hello, I am having hard time migrating vms based on templates from existing 4.2.8 instance to newly installed 4.4.6 HCI with different storage. When I export VMs and corresponding templates to export NFS storage, detach it from source DC and attach the export storage to a new oVirt environment, the import of templates is failing with error "Failed to import Template XXX to Data Center YYY, Cluster ZZZ". I cannot find anything more specific about the error in logs. Am I missing something? Exporting to OVA and importing back does work, but I want to make use of template thin provisioning.

2 3

oVirt 2021 Spring survey
by Sandro Bonazzola 17 May '21

17 May '21

As we continue to develop oVirt 4.4, the Development and Integration teams at Red Hat would value insights on how you are deploying the oVirt environment. Please help us to hit the mark by completing this short survey. Survey will close on *May 30th 2021*. If you're managing multiple oVirt deployments with very different use cases or very different deployments you can consider answering this survey multiple times. *Please note the answers to this survey will be publicly accessible*. This survey is under oVirt Privacy Policy available at https://ovirt.org/privacy-policy.html . The survey form is available at https://docs.google.com/forms/d/e/1FAIpQLScdJGoBYxuW-4IsIvZGVpbiEWhmt4O-oAA… -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

1 1

Re: oVirt deploy new HE Host problem
by Strahil Nikolov 17 May '21

17 May '21

Yes, I did - but I couldn't take a look into them. Best Regards,Strahil Nikolov On Mon, May 10, 2021 at 13:54, Marko Vrgotic<M.Vrgotic(a)activevideo.com> wrote: _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/KJCGYLJK4ILZ5…

2 1

Create Brick from Engine host view
by Harry O 16 May '21

16 May '21

When I try to create a single disk brick via host view "storage devices" on engine, I get the following error. Error while executing action Create Brick: Internal Engine Error Failed to create brick lalaf on host hej1.5ervers.lan of cluster Clu1. I want the brick to be single disk no raid, no cache. Is there a way to create it via CLI? Do I need to pull some logs?

2 1