- Users - oVirt List Archives

image upload on Managed Block Storage
by Henry lol 13 Jan '21

13 Jan '21

Hello, I've just checked I can't upload an image into the MBS block through either UI or restAPI. So, is there any method to do that?

2 4

2021 first ovirt network question
by ozmen62＠hotmail.com 13 Jan '21

13 Jan '21

Hi, We're using oVirt as VDI solution for awhile. Infrastacture is 2 HPE Gen10 server with 80x2 Core cpu, 2TB RAM, 16GBX2 HBA For getting performance i've splited the networks on physical layer 2X10GB LACP for VM network 2X10GB LACP for Display(Spice) network 1GB for management + Default Route After 40 VMs spice connections start to be laggy. We've found our SAN storage I/O is bad and we'll change it SSD But, on the other hand, RDP connections is flawless. Now, we have 70 VMs and i need to solve this problem. Do you thing this is a network problem? We've also checked dropping packages on the switches, but found nothing.

4 11

My web console also can not connect to other cluster's vm.
by tommy 13 Jan '21

13 Jan '21

I encountered the question too. The follow file is the connect file for vm that can connect using remote viewer: [virt-viewer] type=vnc host=192.168.10.41 port=5900 password=rdXQA4zr/UAY # Password is valid for 120 seconds. delete-this-file=1 fullscreen=0 title=HostedEngine:%d toggle-fullscreen=shift+f11 release-cursor=shift+f12 secure-attention=ctrl+alt+end versions=rhev-win64:2.0-160;rhev-win32:2.0-160;rhel8:7.0-3;rhel7:2.0-6;rhel6 :99.0-1 newer-version-url=http://www.ovirt.org/documentation/admin-guide/virt/consol e-client-resources [ovirt] host=ooeng.tltd.com:443 vm-guid=76f99df2-ef79-45d9-8eea-a32b168f9ef3 sso-token=4Up7TfLLBjSuQgPkQvRz3D-fUGZWZg4ynApe2Y7ylkARCFwQWsfEr3dU8FjlK8esct m3Im4tz80mE1DjrNT3XQ admin=1 ca=-----BEGIN CERTIFICATE-----\nMIIDqDCCApCgAwIBAgICEAAwDQYJKoZIhvcNAQELBQAwPzELMAkGA1UEBh MCVVMxETAPBgNVBAoM\nCHRsdGQuY29tMR0wGwYDVQQDDBRvb2VuZy50bHRkLmNvbS4xNzczMDAe Fw0yMTAxMTAxNjE1NDda\nFw0zMTAxMDkxNjE1NDdaMD8xCzAJBgNVBAYTAlVTMREwDwYDVQQKDA h0bHRkLmNvbTEdMBsGA1UE\nAwwUb29lbmcudGx0ZC5jb20uMTc3MzAwggEiMA0GCSqGSIb3DQEB AQUAA4IBDwAwggEKAoIBAQCg\nYT9S7hWiXQUzAqFQKbg2nMjwyHDmb/JmKeJAUVZqNKRg1q80Ip WyoM12Zw0nX1eTwMnVY/JtJON4\n13PoEC3So8nniGt+wtHr44ysvCWfU0SBk/ZPnKmQ58o5MlSk idHwySChXfVPYLPWeUJ1JUrujna/\nCbi5bmmjx2pqwLrZXX8Q5NO2MRKOTs0Dtg16Q6z+a3cXLI ffVJfhPGS3AkIh6nznNaDeH5gFZZbd\nr3DKE4xrpdw/7y6CgjmHe4vwGxOIyE+gElZ/lVtqznLM wohz7wgtgsDA36277mujNyMjMbrSFheu\n5WfbIa9VVSZWEkISVq6eswLOQ1IRaFyJsFN9AgMBAA Gjga0wgaowHQYDVR0OBBYEFDYEqJOMqN8+\nQhCP7DAkqF3RZMFdMGgGA1UdIwRhMF+AFDYEqJOM qN8+QhCP7DAkqF3RZMFdoUOkQTA/MQswCQYD\nVQQGEwJVUzERMA8GA1UECgwIdGx0ZC5jb20xHT AbBgNVBAMMFG9vZW5nLnRsdGQuY29tLjE3NzMw\nggIQADAPBgNVHRMBAf8EBTADAQH/MA4GA1Ud DwEB/wQEAwIBBjANBgkqhkiG9w0BAQsFAAOCAQEA\nAKs0/yQWkoOkGcL0PjF9ijekdMmjrLZGyh 5uLot7h9s/Y2+5l9n9IzEjjx9chi8xwt6MBsR6/nBT\n/skcciv2veM22HwNGjdrHvhfbZFnZsGe 2TU60kGzKjlv1En/8Pgd2aWBcwTlr+SErBXkehNEJRj9\n1saycPgwS4pHS04c2+4JMhpe+hxgsO 2+N/SYkP95Lf7ZQynVsN/SKx7X3cWybErCqoB7G7McqaHN\nVWw+QNXo5islWUXqeDc3RcnW3kq0 XUEzEtp6hoeRcLKO99QrAW31zqU/QY+EeZ6Fax1O/jrDafZn\npTs0KJFNgeVnUhKanB29ONy+tm nUmTAgPMaKKw==\n-----END CERTIFICATE-----\n the firewall list of the host 192.168.10.41 is: [root@ooengh1 ~]# firewall-cmd --list-all public (active) target: default icmp-block-inversion: no interfaces: bond0 ovirtmgmt sources: services: cockpit dhcpv6-client libvirt-tls ovirt-imageio ovirt-vmconsole snmp ssh vdsm ports: 6900/tcp 22/tcp 6081/udp protocols: masquerade: no forward-ports: source-ports: icmp-blocks: rich rules: the follow file is the connect file that vm that cannot connect using remote viewer: [virt-viewer] type=vnc host=ohost1.tltd.com port=5900 password=4/jWA+RLaSZe # Password is valid for 120 seconds. delete-this-file=1 fullscreen=0 title=testol:%d toggle-fullscreen=shift+f11 release-cursor=shift+f12 secure-attention=ctrl+alt+end versions=rhev-win64:2.0-160;rhev-win32:2.0-160;rhel8:7.0-3;rhel7:2.0-6;rhel6 :99.0-1 newer-version-url=http://www.ovirt.org/documentation/admin-guide/virt/consol e-client-resources [ovirt] host=ooeng.tltd.com:443 vm-guid=2b0eeecf-e561-4f60-b16d-dccddfcc852a sso-token=4Up7TfLLBjSuQgPkQvRz3D-fUGZWZg4ynApe2Y7ylkARCFwQWsfEr3dU8FjlK8esct m3Im4tz80mE1DjrNT3XQ admin=1 ca=-----BEGIN CERTIFICATE-----\nMIIDqDCCApCgAwIBAgICEAAwDQYJKoZIhvcNAQELBQAwPzELMAkGA1UEBh MCVVMxETAPBgNVBAoM\nCHRsdGQuY29tMR0wGwYDVQQDDBRvb2VuZy50bHRkLmNvbS4xNzczMDAe Fw0yMTAxMTAxNjE1NDda\nFw0zMTAxMDkxNjE1NDdaMD8xCzAJBgNVBAYTAlVTMREwDwYDVQQKDA h0bHRkLmNvbTEdMBsGA1UE\nAwwUb29lbmcudGx0ZC5jb20uMTc3MzAwggEiMA0GCSqGSIb3DQEB AQUAA4IBDwAwggEKAoIBAQCg\nYT9S7hWiXQUzAqFQKbg2nMjwyHDmb/JmKeJAUVZqNKRg1q80Ip WyoM12Zw0nX1eTwMnVY/JtJON4\n13PoEC3So8nniGt+wtHr44ysvCWfU0SBk/ZPnKmQ58o5MlSk idHwySChXfVPYLPWeUJ1JUrujna/\nCbi5bmmjx2pqwLrZXX8Q5NO2MRKOTs0Dtg16Q6z+a3cXLI ffVJfhPGS3AkIh6nznNaDeH5gFZZbd\nr3DKE4xrpdw/7y6CgjmHe4vwGxOIyE+gElZ/lVtqznLM wohz7wgtgsDA36277mujNyMjMbrSFheu\n5WfbIa9VVSZWEkISVq6eswLOQ1IRaFyJsFN9AgMBAA Gjga0wgaowHQYDVR0OBBYEFDYEqJOMqN8+\nQhCP7DAkqF3RZMFdMGgGA1UdIwRhMF+AFDYEqJOM qN8+QhCP7DAkqF3RZMFdoUOkQTA/MQswCQYD\nVQQGEwJVUzERMA8GA1UECgwIdGx0ZC5jb20xHT AbBgNVBAMMFG9vZW5nLnRsdGQuY29tLjE3NzMw\nggIQADAPBgNVHRMBAf8EBTADAQH/MA4GA1Ud DwEB/wQEAwIBBjANBgkqhkiG9w0BAQsFAAOCAQEA\nAKs0/yQWkoOkGcL0PjF9ijekdMmjrLZGyh 5uLot7h9s/Y2+5l9n9IzEjjx9chi8xwt6MBsR6/nBT\n/skcciv2veM22HwNGjdrHvhfbZFnZsGe 2TU60kGzKjlv1En/8Pgd2aWBcwTlr+SErBXkehNEJRj9\n1saycPgwS4pHS04c2+4JMhpe+hxgsO 2+N/SYkP95Lf7ZQynVsN/SKx7X3cWybErCqoB7G7McqaHN\nVWw+QNXo5islWUXqeDc3RcnW3kq0 XUEzEtp6hoeRcLKO99QrAW31zqU/QY+EeZ6Fax1O/jrDafZn\npTs0KJFNgeVnUhKanB29ONy+tm nUmTAgPMaKKw==\n-----END CERTIFICATE-----\n the firewall list of the host ohost1.tltd.com(192.168.10.160) is: [root@ohost1 ~]# firewall-cmd --list-all public (active) target: default icmp-block-inversion: no interfaces: bond0 ovirtmgmt sources: services: cockpit dhcpv6-client libvirt-tls ovirt-imageio ovirt-vmconsole snmp ssh vdsm ports: 22/tcp 6081/udp protocols: masquerade: no forward-ports: source-ports: icmp-blocks: rich rules: Please give me some advice,thanks.

1 0

v2v-conversion-host-wrapper binary missing, unable to perform host conversion task
by dhanaraj.ramesh＠yahoo.com 13 Jan '21

13 Jan '21

As part of VMware to Ovirt vm migration I'm trying to integrate ovirt cluster to cloudform and make one of the ovirt node - CentOS 8.2 to conversion host, but unfortunately when I preparing conversion host using cloudform ansible playbook, unable to install v2v-conversion-host-wrapper package. up on checking found that the specified package is not available in yum repo,... Any help appreciated.

2 2

Re: VM console does not work with new cluster.
by eevans＠digitaldatatechs.com 12 Jan '21

12 Jan '21

Are you using IP or dns? Has the IP changed? Host IP? Vm id? It sounds like virt viewer cannot find it's target. Connecting with spice or vnc? What do your logs say about the connection? Look at event viewer after a try and see what's in the application log. Eric Evans Digital Data Services LLC. 304.660.9080 -----Original Message----- From: Matthew.Stier(a)fujitsu.com <Matthew.Stier(a)fujitsu.com> Sent: Tuesday, January 12, 2021 1:08 PM To: eevans(a)digitaldatatechs.com; 'Strahil Nikolov' <hunter86_bg(a)yahoo.com>; users(a)ovirt.org Subject: [ovirt-users] Re: VM console does not work with new cluster. Stop/Edit/Start is the only mechanism available. You cannot change the cluster value for a VM, until it is stopped. The VMs have static addresses. The VM is fully function on the new cluster. It’s just that once the VM has been moved to the new cluster, selecting console results in the same behavior, but that virt-viewer starts and stops within a second. -----Original Message----- From: eevans(a)digitaldatatechs.com <eevans(a)digitaldatatechs.com> Sent: Tuesday, January 12, 2021 11:40 AM To: Stier, Matthew <Matthew.Stier(a)fujitsu.com>; 'Strahil Nikolov' <hunter86_bg(a)yahoo.com>; users(a)ovirt.org Subject: RE: [ovirt-users] Re: VM console does not work with new cluster. Did you shut down the vm's and start them up on the new cluster? It sounds like they are associated with the default still and that's where virt viewer is looking for them.. Eric Evans Digital Data Services LLC. 304.660.9080 -----Original Message----- From: Matthew.Stier(a)fujitsu.com <Matthew.Stier(a)fujitsu.com> Sent: Tuesday, January 12, 2021 12:29 PM To: Strahil Nikolov <hunter86_bg(a)yahoo.com>; users(a)ovirt.org Subject: [ovirt-users] Re: VM console does not work with new cluster. Sounds like it, but VMs are running on the same network, with the same IP address. The only firewall involved are on the hosts, and they are both firewalld, and have the same ports and service permitted. -----Original Message----- From: Strahil Nikolov <hunter86_bg(a)yahoo.com> Sent: Sunday, January 10, 2021 10:57 PM To: users(a)ovirt.org; Stier, Matthew <Matthew.Stier(a)fujitsu.com> Subject: Re: [ovirt-users] VM console does not work with new cluster. This sounds like firewall issue. Best Regards, Strahil Nikolov В понеделник, 11 януари 2021 г., 01:05:47 Гринуич+2, Matthew Stier <matthew.stier(a)fujitsu.com> написа: I've added several new hosts to my data center, and instead of adding them to my 'default' cluster, I created a new cluster ('two'). I can access the VM console (virt-viewer) when the VM is on the 'default' cluster, but once moved to the the new cluster, virt-viewer pops up and disappears in sub-second fashion. Moving the VM back to 'default', restores access. I'm running virt-viewer 9.0-256 on my Windows 10 Pro laptop. (for months) I'm running Oracle Linux Virtualization Manager on Oracle Linux 7u9 hosts. The new ('two') cluster hosts are connected to the same networks as the original systems ('default'). (They have the same assigned IP address.) Firewalld is reporting the same ports and services enabled on 'default' and 'two' hosts. The VM's are not running firewalls. Apparently I'm missing something. _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/AAKYLXLBV2FCL… _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/CPQPPOYSQGANL… _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RFYNLB53ALNIT…

2 1

Re: VM console does not work with new cluster.
by Strahil Nikolov 12 Jan '21

12 Jan '21

> It’s just that once the VM has been moved to the new cluster, > selecting console results in the same behavior, but that virt-viewer > starts and stops within a second. In order to debug, you will need to compare the files provided when you press the "console" button from both clusters and identify the problem. Have you compared the firewalld ports on 2 nodes (old and new cluster) ? Best Regards, Strahil Nikolov

1 0

Re: VM console does not work with new cluster.
by eevans＠digitaldatatechs.com 12 Jan '21

12 Jan '21

Did you shut down the vm's and start them up on the new cluster? It sounds like they are associated with the default still and that's where virt viewer is looking for them.. Eric Evans Digital Data Services LLC. 304.660.9080 -----Original Message----- From: Matthew.Stier(a)fujitsu.com <Matthew.Stier(a)fujitsu.com> Sent: Tuesday, January 12, 2021 12:29 PM To: Strahil Nikolov <hunter86_bg(a)yahoo.com>; users(a)ovirt.org Subject: [ovirt-users] Re: VM console does not work with new cluster. Sounds like it, but VMs are running on the same network, with the same IP address. The only firewall involved are on the hosts, and they are both firewalld, and have the same ports and service permitted. -----Original Message----- From: Strahil Nikolov <hunter86_bg(a)yahoo.com> Sent: Sunday, January 10, 2021 10:57 PM To: users(a)ovirt.org; Stier, Matthew <Matthew.Stier(a)fujitsu.com> Subject: Re: [ovirt-users] VM console does not work with new cluster. This sounds like firewall issue. Best Regards, Strahil Nikolov В понеделник, 11 януари 2021 г., 01:05:47 Гринуич+2, Matthew Stier <matthew.stier(a)fujitsu.com> написа: I've added several new hosts to my data center, and instead of adding them to my 'default' cluster, I created a new cluster ('two'). I can access the VM console (virt-viewer) when the VM is on the 'default' cluster, but once moved to the the new cluster, virt-viewer pops up and disappears in sub-second fashion. Moving the VM back to 'default', restores access. I'm running virt-viewer 9.0-256 on my Windows 10 Pro laptop. (for months) I'm running Oracle Linux Virtualization Manager on Oracle Linux 7u9 hosts. The new ('two') cluster hosts are connected to the same networks as the original systems ('default'). (They have the same assigned IP address.) Firewalld is reporting the same ports and services enabled on 'default' and 'two' hosts. The VM's are not running firewalls. Apparently I'm missing something. _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/AAKYLXLBV2FCL… _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/CPQPPOYSQGANL…

2 1

VM console does not work with new cluster.
by Matthew Stier 12 Jan '21

12 Jan '21

I've added several new hosts to my data center, and instead of adding them to my 'default' cluster, I created a new cluster ('two'). I can access the VM console (virt-viewer) when the VM is on the 'default' cluster, but once moved to the the new cluster, virt-viewer pops up and disappears in sub-second fashion. Moving the VM back to 'default', restores access. I'm running virt-viewer 9.0-256 on my Windows 10 Pro laptop. (for months) I'm running Oracle Linux Virtualization Manager on Oracle Linux 7u9 hosts. The new ('two') cluster hosts are connected to the same networks as the original systems ('default'). (They have the same assigned IP address.) Firewalld is reporting the same ports and services enabled on 'default' and 'two' hosts. The VM's are not running firewalls. Apparently I'm missing something.

3 2

why the console cannot display ???
by tommy 12 Jan '21

12 Jan '21

Hi, everyone: In my env, I can using web console connect to engine vm: But , I can not using wen console to connect to other host's VMs. When I try to connect vm, the VV console appears but soon it disappears, very quickly. How can I using VV to connect to VMs ? Thanks!

1 0

Q35: BIOS type changed to "Default" when creating new VM from template with Q35 chipset.
by Tarun Kushwaha 10 Jan '21

10 Jan '21

Hi, https://bugzilla.redhat.com/show_bug.cgi?id=1678262 this bug is still exist i am facing same issue when create VM from REST API and Ansible Please give me solutions

2 1