- Users - oVirt List Archives

Can't delete a disk after a failed upload
by lorenzobarbati02＠gmail.com 21 Nov '20

21 Nov '20

Hi, After trying to upload an ISO via the web interface, the upload remains in the "paused by system" state. When I click "cancel" in the upload menu the status stops at "finalizing cleanup". Is there an alternative way to delete this disk?

1 0

Found a host rebooting - ways to watch?
by Chris Adams 20 Nov '20

20 Nov '20

I just noticed that one of my oVirt physical hosts has been rebooting due to an apparent hardware voltage fault. It's a Dell, and I've got their tools installed and am monitoring status, but the issue clears itself. It has apparently been doing this for a bit now, and we didn't catch it because (a) there weren't any VMs on it (probably were the first time but they were restarted elsewhere fast enough that it wasn't noticed) and (b) it reboots fast enough that at most it pops up in our monitoring system for one pass and then clears so our NOC either didn't see it or assumed it was okay since it cleared. oVirt has been logging alerts when it happens, but seeing that requires someone to log in and check the logs (and we've got a bunch of different systems to manage, including multiple oVirt clusters, so nobody is doing that on a regular basis). We monitor most things with SNMP and/or CLI checks (we have PRTG, Nagios, and LibreNMS for various different things). What are people doing to monitor the health of their oVirt systems? Is it possible to get alerts emailed to admins? Is there any SNMP support in oVirt to allow external systems to monitor its health? This setup is on 4.3.10 if that matters. -- Chris Adams <cma(a)cmadams.net>

2 2

Re: EPYC CPU not being detected correctly on cluster
by Lucia Jelinkova 20 Nov '20

20 Nov '20

Hi, oVirt CPU detection depends on libvirt (and that depends on qemu) CPU models. Could you please run the following command to see what libvirt reports? virsh domcapabilities That should give you the list of CPUs known to libvirt with a usability flag for each CPU. If you find out that the CPU is not usable by libvirt, you might want to dig deeper by querying quemu directly. Locate any VM running on the system by sudo virsh list --all Use the name of a VM in the following command: sudo virsh qemu-monitor-command [your-vm's-name] --pretty '{"execute":"query-cpu-definitions"}' That would give you the list of all CPUs supported by qemu and it will list all cpu's features that are not available on your system. Regards, Lucia On Thu, Nov 19, 2020 at 9:38 PM Vinícius Ferrão via Users <users(a)ovirt.org> wrote: > Hi > > > > I’ve an strange issue with two hosts (not using the hypervisor image) with > EPYC CPUs, on the engine I got this message: > > > > The host CPU does not match the Cluster CPU Type and is running in a > degraded mode. It is missing the following CPU flags: model_EPYC. Please > update the host CPU microcode or change the Cluster CPU Type. > > > > But it is an EPYC CPU, the firmware is updated to the latest versions, but > for some reason oVirt does not like it. > > > > Here’s the relevant output from VDSM: > > "cpuCores": "128", > > "cpuFlags": > "ibs,vme,abm,sep,ssse3,perfctr_core,sse4_2,skip-l1dfl-vmentry,cx16,pae,misalignsse,avx2,smap,movbe,vgif,rdctl-no,extapic,clflushopt,de,sse4_1,xsaveerptr,perfctr_llc,fma,mca,sse,rdtscp,monitor,umip,mwaitx,cr8_legacy,mtrr,stibp,bmi2,pclmulqdq,amd-ssbd,lbrv,pdpe1gb,constant_tsc,vmmcall,f16c,ibrs,fsgsbase,invtsc,nopl,lm,3dnowprefetch,smca,ht,tsc_adjust,popcnt,cpb,bmi1,mmx,arat,aperfmperf,bpext,cqm_occup_llc,virt-ssbd,tce,pse,xsave,xgetbv1,topoext,sha_ni,amd_ppin,rdrand,cpuid,tsc_scale,extd_apicid,cqm,rep_good,tsc,sse4a,flushbyasid,pschange-mc-no,mds-no,ibpb,smep,clflush,tsc-deadline,fxsr,pat,avx,pfthreshold,v_vmsave_vmload,osvw,xsavec,cdp_l3,clzero,svm_lock,nonstop_tsc,adx,hw_pstate,spec-ctrl,arch-capabilities,xsaveopt,skinit,rdt_a,svm,rdpid,lahf_lm,fpu,rdseed,fxsr_opt,sse2,nrip_save,vmcb_clean,sme,cat_l3,cqm_mbm_local,irperf,overflow_recov,avic,mce,mmxext,msr,cx8,hypervisor,wdt,mba,nx,decodeassists,cmp_legacy,x2apic,perfctr_nb,succor,pni,xsaves,clwb,cqm_llc,syscall,apic,pge,npt,pse36,cmov,ssbd,pausefilter,sev,aes,wbnoinvd,cqm_mbm_total,spec_ctrl,model_qemu32,model_Opteron_G3,model_Nehalem-IBRS,model_qemu64,model_Conroe,model_kvm64,model_Penryn,model_SandyBridge,model_pentium,model_pentium2,model_kvm32,model_Nehalem,model_Opteron_G2,model_pentium3,model_Opteron_G1,model_SandyBridge-IBRS,model_486,model_Westmere-IBRS,model_Westmere", > > "cpuModel": "AMD EPYC 7H12 64-Core Processor", > > "cpuSockets": "2", > > "cpuSpeed": "3293.405", > > "cpuThreads": "256", > > > > Any ideia on why ou what to do to fix it? > > > > Thanks, > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/WP6XL6ODTLJVB… >

2 1

Upgrade hyperconverged self-hosted ovirt from 4.3 to 4.4
by ralf＠os-s.de 20 Nov '20

20 Nov '20

Hi, has anyone attempted an upgrade from 4.3 to 4.4 in a hyperconverged self-hosted setup? The posted guidelines seem a bit contradictive and not complete. Has anyone tried it and could share his experiences? I am currently having problems when deploying the hosted engine and restoring. The host becomes unresponsive and has hung tasks. Kind regards, Ralf

3 6

change domain name from export domain
by jb 20 Nov '20

20 Nov '20

Hello, I needed to rename all domain names from my NFS storage. VM data and seconds data domains was no problem. But when I try to rename the domain from export domain, a red popup on top opens with this message: Uncaught exception occurred. Please try reloading the page. Details: (TypeError) : ZOj(...) is null Please have your administrator check the UI logs I also notice that, when I rename the path an hit enter, it doesn't write anything to the engine.log Is this a known issue? Best regards Jonathan

1 0

Ovirt 4 2 NIC's
by Facundo Badaracco 20 Nov '20

20 Nov '20

Hi everyone! Hope someone can help me with this.. I have 3 servers with centos 8 and ovirt 4 installed. Each server has 2 nic. Server A = HE (HA) Nic1= 192.169.2.24 Nic2=no ip Server B = HE (HA) Nic1= 192.169.2.25 Nic2=no ip Server C = simply host. Nic1= 192.169.2.26 Nic2=no ip How can i configure the second NIC in each server in order to use it for clients connect to the vms?. I want one nic for management, the other for connections.

2 1

Can't use ovirt web interface (500 error)
by lorenzobarbati02＠gmail.com 20 Nov '20

20 Nov '20

Hi, After updating to the latest version of ovirt (standalone installed with engine-setup) I am no longer able to use the web ui. After I log in, in fact, I get a modal error entitled "operation canceled" and with content "a request to the server failed, error 500" Looking at the requests it actually receives an error 500 when it goes to make a request to "/ovirt-engine/webadmin/GenericApiGWTService" which replies "The call failed on the server; see server log for details" These are the last lines of the engine.log: https://pastebin.com/uFgZASuW Is anyone experiencing the same problem or know how to fix it?

2 1

How do you manage OVN?
by Alex McWhirter 20 Nov '20

20 Nov '20

I'm not sure if I' missing something, but it seems there is no way built in to oVirt to manage OVN outside of network / subnet creation. In particular routing both between networks and to external networks. Of course you have the OVN utilities, but it seems that the provider API is the preffered method of interaction? As far as i can tell, the only utility that can use this API as intended is ManageIQ, which is a bit a behemoth if you only need the OVN portion of things. So is that it then? Interface with the API directly or use ManageIQ? Just curious what others are doing in regards to OVN.

2 1

Need documentation on how to use grafana with ovirt
by wodel youchi 20 Nov '20

20 Nov '20

Hi, Is there any documentation explaining how to use grafana portal to extract metrics data from ovirt ? Regards.

2 1

Re: ovirt 4.3 - locked image vm - unable to remove a failed deploy of a guest dom
by 3c Monitor 20 Nov '20

20 Nov '20

Hi, anyone with an idea on what else I can do? Thanks a lot.

1 0