- Users - oVirt List Archives

Hosted Engine stuck in Firmware
by Vinícius Ferrão 30 Aug '20

30 Aug '20

Hello, I’ve an strange issue with oVirt 4.4.1 The hosted engine is stuck in the UEFI firmware trying to “never” boot. I think this happened when I changed the default VM mode for the cluster inside the datacenter. There’s a way to fix this without redeploying the engine?

3 3

deprecating export domain?
by Charles Kozler 30 Aug '20

30 Aug '20

Hello, I recently read on this list from a redhat member that export domain is either being deprecated or looking at being deprecated To that end, can you share details? Can you share any notes/postings/bz's that document this? I would imagine something like this would be discussed in larger audience This seems like a somewhat significant change to make and I am curious where this is scheduled? Currently, a lot of my backups rely explicitly on an export domain for online snapshots, so I'd like to plan accordingly Thanks!

11 21

shutdown virtual machine did not display in the list when using virsh list --all and virsh list --state-shutoff
by Kyre 30 Aug '20

30 Aug '20

Hello, I am using ovirt 4.3.8. I want to use the virsh command to boot the shutdown virtual machine, but when using virsh list --all and virsh list --state-shutoff, the shutdown virtual machine did not display in the list. What is the cause of this, and how can I display the shutdown virtual machine. virsh # list --all Please enter your authentication name: root Please enter your password:  Id    Name                           State ----------------------------------------------------  4     win10E2                  running virsh # list --state-shutoff  Id    Name                           State ----------------------------------------------------

4 3

Ovirt Node 4.4.2 Engine Deployment - Notification Settings
by David White 30 Aug '20

30 Aug '20

I finally got oVirt node installed with gluster on a single node. So that's great progress! Once that step was complete... I noticed that the Engine Deployment wizard asks for SMTP settings for where to send notifications. I was kind of surprised that it doesn't allow one to enter any credentials. It looks like this requires an unauthenticated local relay. I don't like that. :) See attached screenshot. Has there been any talk about adding this into the wizard deployment? Sent with ProtonMail Secure Email.

2 1

i/o wait and slow system
by info＠dsdm.ch 28 Aug '20

28 Aug '20

Hello, I'm running a home setup with 3 nodes and 2 SATA SSDs per node. As storage I'm running glusterfs and 40GBit/s links. Software Version:4.3.9.4-1.el7 I've a lot of I/O Wait on the nodes (20%) and on the VMs (50%). gluster volume top vmstore write-perf bs 2014 count 1024 | grep Through Throughput 635.54 MBps time 0.0032 secs Throughput 614.89 MBps time 0.0034 secs Throughput 622.31 MBps time 0.0033 secs Throughput 643.07 MBps time 0.0032 secs Throughput 621.75 MBps time 0.0033 secs Throughput 609.26 MBps time 0.0034 secs gluster volume top vmstore read-perf bs 2014 count 1024 | grep Through Throughput 1274.62 MBps time 0.0016 secs Throughput 1320.32 MBps time 0.0016 secs Throughput 1203.93 MBps time 0.0017 secs Throughput 1293.81 MBps time 0.0016 secs Throughput 1213.14 MBps time 0.0017 secs Throughput 1193.48 MBps time 0.0017 secs Volume Name: vmstore Type: Distributed-Replicate Volume ID: 195e2a05-9667-4b8b-b0b7-82294631de50 Status: Started Snapshot Count: 0 Number of Bricks: 2 x 3 = 6 Transport-type: tcp Bricks: Brick1: 10.9.9.101:/gluster_bricks/vmstore/vmstore Brick2: 10.9.9.102:/gluster_bricks/vmstore/vmstore Brick3: 10.9.9.103:/gluster_bricks/vmstore/vmstore Brick4: 10.9.9.101:/gluster_bricks/S4CYNF0M219849L/S4CYNF0M219849L Brick5: 10.9.9.102:/gluster_bricks/S4CYNF0M219836L/S4CYNF0M219836L Brick6: 10.9.9.103:/gluster_bricks/S4CYNF0M219801Y/S4CYNF0M219801Y Options Reconfigured: performance.client-io-threads: on nfs.disable: on transport.address-family: inet performance.strict-o-direct: on performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.low-prio-threads: 32 network.remote-dio: off cluster.eager-lock: enable cluster.quorum-type: auto cluster.server-quorum-type: server cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-max-threads: 8 cluster.shd-wait-qlength: 10000 features.shard: on user.cifs: off cluster.choose-local: off client.event-threads: 4 server.event-threads: 4 network.ping-timeout: 30 storage.owner-uid: 36 storage.owner-gid: 36 cluster.granular-entry-heal: enable Please help me to analyse the root cause. Many thanks Metz

4 14

Missing model_FLAGS on specific host
by Vinícius Ferrão 28 Aug '20

28 Aug '20

Hi, I’ve an strange issue in one of my hosts, it’s missing a lot of CPU flags that oVirt seems to require: [root@c4140 ~]# vdsm-client Host getCapabilities | egrep "cpuFlags|cpuModel" "cpuFlags": "ssse3,mca,ept,pdpe1gb,vmx,clwb,smep,msr,acpi,pge,sse4_2,nopl,cqm_mbm_total,cx16,avx512vl,aperfmperf,xsaves,3dnowprefetch,nonstop_tsc,cmov,mce,intel_pt,avx512f,fpu,pku,tsc,sdbg,erms,pse36,md_clear,apic,sse,pcid,clflushopt,xtopology,pts,monitor,vpid,cpuid,hle,mba,ss,cqm,avx2,ibpb,xgetbv1,flush_l1d,mmx,epb,pti,fxsr,dca,nx,syscall,stibp,mtrr,cx8,sse2,avx,sep,intel_ppin,lm,tm,bts,adx,bmi1,smx,popcnt,pclmulqdq,lahf_lm,mpx,rdseed,cqm_llc,avx512cd,cdp_l3,f16c,invpcid,fsgsbase,cpuid_fault,tm2,smap,dts,pse,xsave,sse4_1,constant_tsc,pat,tsc_deadline_timer,vnmi,avx512dq,dtes64,xsaveopt,ida,pdcm,tpr_shadow,pln,de,x2apic,avx512bw,pae,rdrand,clflush,rdtscp,art,cqm_mbm_local,pebs,ssbd,movbe,pbe,tsc_adjust,vme,ht,est,bmi2,cat_l3,dtherm,ospke,rdt_a,aes,ibrs,rep_good,fma,xtpr,ds_cpl,abm,xsavec,invpcid_single,flexpriority,cqm_occup_llc,pni,rtm,arat,arch_perfmon", "cpuModel": "Intel(R) Xeon(R) Gold 6130 CPU @ 2.10GHz", In a properly working host it have flags like those ones: model_Westmere-IBRS,model_kvm32,model_core2duo,model_Opteron_G1,model_Broadwell,model_qemu64,model_Broadwell-noTSX,model_Nehalem-IBRS,model_Haswell-IBRS,model_pentium2,model_Broadwell-IBRS,model_Haswell-noTSX,model_Haswell,model_Haswell-noTSX-IBRS,model_Conroe,model_pentium,model_n270,model_Nehalem,model_IvyBridge-IBRS,model_kvm64,model_SandyBridge,model_pentium3,model_Broadwell-noTSX-IBRS,model_qemu32,model_486,model_IvyBridge,model_SandyBridge-IBRS,model_Westmere,model_Penryn,model_Opteron_G2,model_coreduo", But in this machine it’s totally missing. I know this model_ flags are an oVirt thing, since they aren’t default on the CPUs. The host machine is a Dell C4140 compute node, the firmware is fully updated, so I’ve done the basic to figure out what’s happening. Thanks,

1 1

ovirt 4.4 self-hosted deployment questions
by Michael Thomas 28 Aug '20

28 Aug '20

I have not been able to find answers to a couple of questions in the self-hosted engine documentation[1]. * When installing a new Enterprise Linux host for ovirt, what are the network requirements? Specifically, am I supposed to set up the ovirtmgmt bridge myself on new hosts, or am I supposed to let that be handled by the engine when I add the new host to the engine? * In the 'New Host' dialog on the engine management page, does the Hostname/IP that I enter have to be the host's name on the ovirtmgmt LAN? If so, then it seems to me that I need to configure the ovirtmgmt bridge myself on new hosts. * Does the engine need to be able to route outside of the cluster (eg to the WAN), or is it allowed to restrict the engine's routing to the local cluster? * In the 'New Host' dialog on the engine management page, what is the meaning of 'Choose hosted engine deployment action'? From the way it is phrased, it sounds like this will create a second engine in my cluster, which doesn't make sense. Or does this mean that the new host will be able to run the Engine VM in a HA manner? In my current test deployment I have 3 subnets in my cluster. Network WAN is the WAN. Network CLUSTER is for communication between cluster compute nodes, storage servers, and management servers. Network OVIRT is for ovirt management and VM migration between hosts. My first self-hosted engine host is connected to networks CLUSTER and OVIRT. The engine VM is only connected to network OVIRT through a bridge on the host, but has a gateway that lets it route traffic to network CLUSTER (but not network WAN). Is this an appropriate network setup for ovirt, or should there be no distinction between the CLUSTER and OVIRT networks? --Mike [1]https://www.ovirt.org/documentation/installing_ovirt_as_a_self-hosted_eng…

2 1

Gluster Volume Type Distributed
by Dominique Deschênes 28 Aug '20

28 Aug '20

Hi Everyone, I would like to use Distrbuted Volume type but the volume type is Gray out. I can only use the replicate type. It's normal ? 3 ovirt Servers 4.4.1-2020080418 Can I configure a replicate volume for the engine domain and Distributed for the data domain? Thank you Dominique Deschênes Ingénieur chargé de projets, Responsable TI 816, boulevard Guimond, Longueuil J4G 1T5 450 670-8383 x105 450 670-2259

4 3

Failed to connect to the hypervisor
by Eugène Ngontang 28 Aug '20

28 Aug '20

Hi, I'm facing a strange issue with ovirt host. I can't list nodes status running virsh, vdsdm seems bad. I can't even delete the hosted engine, nor ping it, but I can still access my infra vm inside it[image: 😉] My outputs : > [root@moe ~]# /usr/sbin/ovirt-hosted-engine-cleanup > This will de-configure the host to run ovirt-hosted-engine-setup from > scratch. > Caution, this operation should be used with care. > Are you sure you want to proceed? [y/n] > y > -=== Destroy hosted-engine VM ===- > You must run deploy first > setlocale: No such file or directory > error: failed to connect to the hypervisor > error: Failed to connect socket to '/var/run/libvirt/libvirt-sock': No > such file or directory > -=== Stop HA services ===- > -=== Shutdown sanlock ===- > shutdown force 1 wait 0 > shutdown done -111 > -=== Disconnecting the hosted-engine storage domain ===- > You must run deploy first > -=== De-configure VDSM networks ===- > ovirtmgmt > ovirtmgmt > A previously configured management bridge has been found on the system, > this will try to de-configure it. Under certain circumstances you can loose > network connection. > Caution, this operation should be used with care. > Are you sure you want to proceed? [y/n] > y > -=== Stop other services ===- > -=== De-configure external daemons ===- > -=== Removing configuration files ===- > ? /etc/init/libvirtd.conf already missing > ? /etc/libvirt/nwfilter/vdsm-no-mac-spoofing.xml already missing > ? /etc/ovirt-hosted-engine/answers.conf already missing > ? /etc/ovirt-hosted-engine/hosted-engine.conf already missing > ? /etc/vdsm/vdsm.conf already missing > ? /etc/pki/vdsm/*/*.pem already missing > ? /etc/pki/CA/cacert.pem already missing > ? /etc/pki/libvirt/*.pem already missing > ? /etc/pki/libvirt/private/*.pem already missing > ? /etc/pki/ovirt-vmconsole/*.pem already missing > ? /var/cache/libvirt/* already missing > ? /var/run/ovirt-hosted-engine-ha/* already missing > [root@moe ~]# ping 192.168.33.143 > PING 192.168.33.143 (192.168.33.143) 56(84) bytes of data. > 64 bytes from 192.168.33.143: icmp_seq=1 ttl=64 time=0.132 ms > 64 bytes from 192.168.33.143: icmp_seq=2 ttl=64 time=0.082 ms > 64 bytes from 192.168.33.143: icmp_seq=3 ttl=64 time=0.072 ms > 64 bytes from 192.168.33.143: icmp_seq=4 ttl=64 time=0.083 ms > 64 bytes from 192.168.33.143: icmp_seq=5 ttl=64 time=0.075 ms > 64 bytes from 192.168.33.143: icmp_seq=6 ttl=64 time=0.082 ms > ^C > --- 192.168.33.143 ping statistics --- > 6 packets transmitted, 6 received, 0% packet loss, time 4999ms > rtt min/avg/max/mdev = 0.072/0.087/0.132/0.022 ms > [root@moe ~]# nodectl check > Status: WARN > Bootloader ... OK > Layer boot entries ... OK > Valid boot entries ... OK > Mount points ... OK > Separate /var ... OK > Discard is used ... OK > Basic storage ... OK > Initialized VG ... OK > Initialized Thin Pool ... OK > Initialized LVs ... OK > Thin storage ... OK > Checking available space in thinpool ... OK > Checking thinpool auto-extend ... OK > vdsmd ... BAD > [root@moe ~]# virsh -r list > setlocale: No such file or directory > error: failed to connect to the hypervisor > error: Failed to connect socket to '/var/run/libvirt/libvirt-sock-ro': No > such file or directory > [root@moe ~]# Have you guys ever faced this issue? How can I access VM inside my virtual data center while the VM Manager is broken? Any solution to work around this please? Regards, Eugène NG -- LesCDN <http://lescdn.com> engontang(a)lescdn.com ------------------------------------------------------------ *Aux hommes il faut un chef, et au* * chef il faut des hommes!L'habit ne fait pas le moine, mais lorsqu'on te voit on te juge!*

1 0

Compatibilty issue
by carl langlois 27 Aug '20

27 Aug '20

Hi, I have upgraded ovirt to 4.3 and now I have some vm that I can start because of the cluster compatibility version. Those VM where in save state when I updated the cluster compatibility version. Now they are in a down state but if i try to run it I get this message. Cannot run VM. The Custom Compatibility Version of VM vmfpgatest (4.2) is not supported in Data Center compatibility version 4.3. any suggestions? Regards Carl

1 0