- Users - oVirt List Archives

oVirt 4.4 and management network requirements
by Gianluca Cecchi 26 May '20

26 May '20

Hello, does oVirt 4.4. support management network distributed between routed networks and not bound to a single one? In some environments I see situations where there are 2 different server farms with networks not necessarily mapped to the same ranges and so it could be useful to let oVirt hosts of the same cluster to be able to communicate but not on the same physical network. Eg vSphere can do it. Thanks in advance, Gianluca

3 7

Re: Reconfigure Websocket Proxy
by Yedidyah Bar David 26 May '20

26 May '20

On Tue, May 26, 2020 at 3:15 PM Anton Louw via Users <users(a)ovirt.org> wrote: > > > Hi Everybody, > > > > I tried looking around, but I am stuck. I am trying to reconfigure my > Websocket proxy in order to use noVNC. This is after the Hosted Engine name > was changed and also after a new SSL cert was added to the Hosted Engine. > > > > Most of the articles say that I should run “engine-cleanup”, but after > learning the hard way, I would rather not do that again 😊 Any other way > anybody knows of? I want to completely remove it and then reinstall it. > Didn't test this, but you can try: 1. Keep a backup of /etc somewhere, just in case. 2. Stop ovirt-websocket-proxy.service 3. Edit /etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf , remove the line with: OVESETUP_CONFIG/websocketProxyConfig 4. Remove: /etc/ovirt-engine/ovirt-websocket-proxy.conf.d/10-setup.conf /etc/pki/ovirt-engine/requests/websocket-proxy.req /etc/pki/ovirt-engine/keys/websocket-proxy.key.nopass /etc/pki/ovirt-engine/keys/websocket-proxy.p12 /etc/pki/ovirt-engine/certs/websocket-proxy.cer 5. Run engine-setup (perhaps with '--offline', if you want to prevent it from checking for updates) Good luck and best regards, > > > Thanks > > *Anton Louw* > *Cloud Engineer: Storage and Virtualization* at *Vox* > ------------------------------ > *T:* 087 805 0000 | *D:* 087 805 1572 > *M:* N/A > *E:* anton.louw(a)voxtelecom.co.za > *A:* Rutherford Estate, 1 Scott Street, Waverley, Johannesburg > www.vox.co.za > > [image: F] <https://www.facebook.com/voxtelecomZA> > [image: T] <https://www.twitter.com/voxtelecom> > [image: I] <https://www.instagram.com/voxtelecomza/> > [image: L] <https://www.linkedin.com/company/voxtelecom> > [image: Y] <https://www.youtube.com/user/VoxTelecom> > > [image: #VoxBrand] > <https://www.vox.co.za/fibre/fibre-to-the-home/?prod=HOME> > *Disclaimer* > > The contents of this email are confidential to the sender and the intended > recipient. Unless the contents are clearly and entirely of a personal > nature, they are subject to copyright in favour of the holding company of > the Vox group of companies. Any recipient who receives this email in error > should immediately report the error to the sender and permanently delete > this email from all storage devices. > > This email has been scanned for viruses and malware, and may have been > automatically archived by *Mimecast Ltd*, an innovator in Software as a > Service (SaaS) for business. Providing a *safer* and *more useful* place > for your human generated data. Specializing in; Security, archiving and > compliance. To find out more Click Here > <https://www.voxtelecom.co.za/security/mimecast/?prod=Enterprise>. > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/NXNCD2LSLV2OD… > -- Didi

1 0

Reconfigure Websocket Proxy
by Anton Louw 26 May '20

26 May '20

Hi Everybody, I tried looking around, but I am stuck. I am trying to reconfigure my Websocket proxy in order to use noVNC. This is after the Hosted Engine name was changed and also after a new SSL cert was added to the Hosted Engine. Most of the articles say that I should run “engine-cleanup”, but after learning the hard way, I would rather not do that again 😊 Any other way anybody knows of? I want to completely remove it and then reinstall it. Thanks Anton Louw Cloud Engineer: Storage and Virtualization ______________________________________ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.louw(a)voxtelecom.co.za www.vox.co.za

1 0

Terraform - Ovirt - seting or get some parameters
by Michal Obeslo 26 May '20

26 May '20

Hi all, we need a help, we have problem to set and get IP Address when we created virtual machine when we use terraform. step by step: what we created 1) we created virtual machine Debian 9 - installed the software ovirt-guest-agent) [systemctl status ovirt-guest agent = OK - we created private and public key to connectivity from another computer by .ssh ) /Jenkins Slave/ 2) we created template from virtual machine Debian 9 - set this parameter in template initial Run > user, set static IP in Ovirt Managemet 3) downloaded project from GitHub - create virtual machine from template - terraform main file = OK ? - terraform init = OK - terraform apply = OK : yes create new virtual machine = OK start automatically virtual machine = OK - when I check IP Address > IP address not set - when I check settings in Ovirt management > network > NOT SET - virtual machine not has IP addres > not working - when I change settings in Ovirt management in template Debian from Static IP dhcp > to DHCP - when I check settings in Ovirt management > network > IP in Ovit have DHCP, Virtual machine have dhcp OK But wee need set static IP to Virtual machine and get this IP from terraform. Thank you all. Best regard Michal --- This is the file main.tf: provider "ovirt" { url = "${var.ovirt_url}" username = "${var.ovirt_username}" password = "${var.ovirt_password}" } terraform { backend "local" { path = "terraform.tfstate" } } # Create VM call temp02 module "temp01-pipeline" { source = "../modules/vms" vm_authorized_ssh_key = "${file(pathexpand("c:/cygwin64/home/Administrator/.ssh/id_rsa.pub"))}" vm_custom_script = " ${file(pathexpand("c:/Jenkins/workspace/AT_PipelineVM/config/basic/terraform/ovirt/init_script.yml"))}" cluster_id = "aa583cf2-a07a-11e8-aa92-525400491e5b" vm_name = "cd-pipeline-1.0.0" vm_memory = "4096" vm_cpu_cores = "1" vm_template_id = "876a260b-26c7-482e-bc19-19b10b9c48bb" vm_hostname = "temp01.example.com" vm_user_name = "root" vm_dns_servers = "8.8.8.8" vm_dns_search = "example.com" vm_timezone = "Africa/Nairobi" vm_nic_device = "env3" vm_nic_ip_address = "192.168.26.36" vm_nic_gateway = "192.168.26.2" vm_nic_netmask = "255.255.255.0" }

2 1

How to change IP range of node and hosted engine without break anything ?
by Stéphane Paillet 26 May '20

26 May '20

Hello, I installed an ovirt node and its hosted engine in a lab. After several difficulties to install the engine (I don't know why, I didn't have any problem in the past), I would like to change IPs of both to put them on another vlan. How can I do that without break anything ? My main fear is that the data domain used by the hosted engine use the IP of the node rather than its FQDN. I change other data domains paths, but don't find how to change this one, 'cause I can't modify it, and I can't detach / delete it to recreate another one. I didn't find how to move the engine on another data domain using the node's FQDN in its path. For now, I don't use DNS, I just updated /etc/hosts defs on both servers. If someone could help me, telling me step by step how to change IPs on each element in good order, I would be grateful. Thank you. Cheers, Stephane

2 3

ovirt node 4.4 and infiniband
by Giulio Casella 26 May '20

26 May '20

Hi all, I have in production a 4.3.9 setup of ovirt, based on a standalone engine, not HE. I have 3 datacenters (an 3 clusters). One of these clusters is composed of many tenth of HP blades, accessing storage via InfiniBand (used as normal NICs, via ipoib). They're not the state of the art, but I cannot renew the entire hardware. After a setup of ovirt node 4.4 I cannot see ib0 nic. I managed to see it installing CentOS 8, enabling Mellanox repo (https://linux.mellanox.com/public/repo/mlnx_ofed/latest/rhel8.1/mellanox_ml…) and installing package "mlnx-ofed-basic". In Ovirt Node it's not possible, that package require dependencies from CentOS 8 repos, not present in ovirt repo. Is there any chances to have infiniband NICs working in ovirt? TIA, gc

3 3

Error encountered when running ovirt-engine-rename
by Aidilf Fitri 26 May '20

26 May '20

Hello All, I have encountered an error when trying to execute the ovirt engine rename script. Below is the error I have encountered. Any advise? ----------------Start of Error---------------------------------------------------------------------------------------------------------------------------------------------------- ***L:ERROR Internal error: No module named 'urlparse' Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/otopi/main.py", line 141, in execute self.context.loadPlugins() File "/usr/lib/python3.6/site-packages/otopi/context.py", line 803, in loadPlugins self._loadPluginGroups(plugindir, needgroups, loadedgroups) File "/usr/lib/python3.6/site-packages/otopi/context.py", line 112, in _loadPluginGroups self._loadPlugins(path, path, groupname) File "/usr/lib/python3.6/site-packages/otopi/context.py", line 69, in _loadPlugins self._loadPlugins(base, d, groupname) File "/usr/lib/python3.6/site-packages/otopi/context.py", line 100, in _loadPlugins os.path.basename(path), File "/usr/lib/python3.6/site-packages/otopi/util.py", line 109, in loadModule spec.loader.exec_module(module) File "<frozen importlib._bootstrap_external>", line 678, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/usr/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-rename/vmconsole_proxy_helper/__init__.py", line 15, in <module> from . import config File "/usr/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-rename/vmconsole_proxy_helper/config.py", line 14, in <module> import urlparse ModuleNotFoundError: No module named 'urlparse' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/otopi/__main__.py", line 88, in main installer.execute() File "/usr/lib/python3.6/site-packages/otopi/main.py", line 147, in execute sys.exc_info()[2], File "/usr/lib/python3.6/site-packages/otopi/util.py", line 84, in raiseExceptionInformation raise info[1].with_traceback(info[2]) File "/usr/lib/python3.6/site-packages/otopi/main.py", line 141, in execute self.context.loadPlugins() File "/usr/lib/python3.6/site-packages/otopi/context.py", line 803, in loadPlugins self._loadPluginGroups(plugindir, needgroups, loadedgroups) File "/usr/lib/python3.6/site-packages/otopi/context.py", line 112, in _loadPluginGroups self._loadPlugins(path, path, groupname) File "/usr/lib/python3.6/site-packages/otopi/context.py", line 69, in _loadPlugins self._loadPlugins(base, d, groupname) File "/usr/lib/python3.6/site-packages/otopi/context.py", line 100, in _loadPlugins os.path.basename(path), File "/usr/lib/python3.6/site-packages/otopi/util.py", line 109, in loadModule spec.loader.exec_module(module) File "<frozen importlib._bootstrap_external>", line 678, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/usr/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-rename/vmconsole_proxy_helper/__init__.py", line 15, in <module> from . import config File "/usr/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-rename/vmconsole_proxy_helper/config.py", line 14, in <module> import urlparse otopi.main.PluginLoadException: No module named 'urlparse' ----------------End of Error----------------------------------------------------------------------------------------------------------------------------------------------------

3 2

where is ovirt-iso-uploader in 4.4?
by dan.creed＠thecreeds.net 25 May '20

25 May '20

Can't seem to find this, maybe I'm old school but in 4.4 how do I upload ISO's I want to boot as CD's on my virtual machine?

4 4

[ANN] oVirt 4.4.1 First Release Candidate is now available for testing
by Lev Veyde 25 May '20

25 May '20

oVirt 4.4.1 First Release Candidate is now available for testing The oVirt Project is pleased to announce the availability of oVirt 4.4.1 First Release Candidate for testing, as of May 25th, 2020. This update is the first in a series of stabilization updates to the 4.4 series. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. Some of the features included in oVirt 4.4.1 Release Candidate require content that will be available in CentOS Linux 8.2 but can’t be tested on RHEL 8.2 beta yet due to some incompatibility in openvswitch package shipped in CentOS Virt SIG which requires to rebuild openvswitch on top of CentOS 8.2. Installation instructions For the engine: either use appliance or: - Install CentOS Linux 8 minimal from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - dnf module enable -y javapackages-tools pki-deps postgresql:12 - dnf install ovirt-engine - engine-setup For the nodes: Either use oVirt Node ISO or: - Install CentOS Linux 8 from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… ; select minimal installation - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - Attach the host to engine and let it be deployed. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.1 or newer * CentOS Linux (or similar) 8.1 or newer This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.1 or newer * CentOS Linux (or similar) 8.1 or newer * oVirt Node 4.4 based on CentOS Linux 8.1 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. If you manage more than one oVirt instance, OKD or RDO we also recommend to try ManageIQ <http://manageiq.org/>. In such a case, please be sure to take the qc2 image and not the ova image. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.1 release highlights: http://www.ovirt.org/release/4.4.1/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.1/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

Failed to import vmware vm to ovirt use web UI
by stone＠onlyos.com 25 May '20

25 May '20

2 1