- Users - oVirt List Archives

Can we agree on adding reference to version in help request email?
by Sandro Bonazzola 30 Apr '20

30 Apr '20

Hi, I was looking in the past 2 weeks email landing on this mailing list and a common thing I notice is that it's hard to understand which version of the involved software they're referring too. Can we agree on adding at the top of the message a couple of line like output of yum -q list installed centos-release ovirt-release\* ovirt-engine redhat-release vdsm glusterfs centos-release.x86_64 7-7.1908.0.el7.centos glusterfs.x86_64 6.8-1.el7 ovirt-engine.noarch 4.3.9.4-1.el7 ovirt-release43.noarch 4.3.9-1.el7 It will help understanding if the help request is something that may be already known, a regression, and so on. -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/>* <https://www.redhat.com/en/summit?sc_cid=7013a000002D2QxAAK>* *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

3 2

Add custom Network Filter to oVirt
by Hendrik Peyerl 30 Apr '20

30 Apr '20

Hello all, can anyone give me a hint on where to find documentation on how to add custom created network filters through oVirt? Thanks, Hendrik

3 5

Re: Move Hosted Engine VM to a different storage domain
by Yedidyah Bar David 30 Apr '20

30 Apr '20

On Wed, Apr 29, 2020 at 8:42 AM Anton Louw <Anton.Louw(a)voxtelecom.co.za> wrote: > > > Hi, > > > > Thank you for the reply. I am building another environment today, so I > will run through the backup and restore again. I do recall one issue I had > with the restore was that it gave an error that one of the storage domains > were already in use. This was a new storage domain I added, with no VMs on. > > > > I just want to make sure, I probably cannot deploy the HE on a storage > domain that is in maintenance, correct? I will try and create a new storage > domain again, but remove it from the data center, and perhaps see if the HE > will deploy to it. > hosted-engine deploy does not require an "empty storage domain" (in maintenance or not), but one that "does not exist yet" - meaning, a path to storage that will be used as a storage domain, but in which a storage domain was not created yet. The deploy process itself will create the domain there. I hope this clarifies. > > > The main goal was to have no downtime, but if it is going to be too > complex, I think my next option will be to create a new HE, and attach the > current storage domains. Obviously it is going to take a bit of planning, > as I will need to configure all the networks etc. from scratch again. > Good luck and keep us updated! Best regards, > > > Thanks > > > > *Anton Louw* > *Cloud Engineer: Storage and Virtualization* at *Vox* > ------------------------------ > *T:* 087 805 0000 | *D:* 087 805 1572 > *M:* N/A > *E:* anton.louw(a)voxtelecom.co.za > *A:* Rutherford Estate, 1 Scott Street, Waverley, Johannesburg > www.vox.co.za > > [image: F] <https://www.facebook.com/voxtelecomZA> > [image: T] <https://www.twitter.com/voxtelecom> > [image: I] <https://www.instagram.com/voxtelecomza/> > [image: L] <https://www.linkedin.com/company/voxtelecom> > [image: Y] <https://www.youtube.com/user/VoxTelecom> > > *From:* Strahil Nikolov <hunter86_bg(a)yahoo.com> > *Sent:* 26 April 2020 08:55 > *To:* Yedidyah Bar David <didi(a)redhat.com>; Anton Louw < > Anton.Louw(a)voxtelecom.co.za> > *Cc:* users(a)ovirt.org > *Subject:* Re: [ovirt-users] Re: Move Hosted Engine VM to a different > storage domain > > > > On April 26, 2020 9:39:07 AM GMT+03:00, Yedidyah Bar David < > didi(a)redhat.com> wrote: > >On Fri, Apr 24, 2020 at 1:04 PM Anton Louw > ><Anton.Louw(a)voxtelecom.co.za> > >wrote: > > > >> > >> > >> Hi All, > >> > >> > >> > >> I know this question has been asked before, by myself included. I was > >> hoping that someone has run through the exercise of moving the hosted > >> engine VM to a different storage domain. I have tried many routes, > >but the > >> backup and restore does not work for me. > >> > > > >The "standard answer" is backup and restore. Why does it not work? > > > > > >> > >> > >> Is there anybody that can perhaps give me some guidelines or a > >process I > >> can follow? > >> > > > >I didn't try that myself. > > > >The best guidelines I can give you are: Try first on at a test system. > >Do > >the backup on the real machine, create some isolated VM (isolated so > >that > >it does not interfere with your hosts/storage) somewhere to be used as > >a > >test host (or a physical machine if you have one), some storage > >somewhere, > >and restore on it. Make it work. Document what you needed to do. Ask > >here > >with specific questions if/when you have them. Then do on the > >production > >setup. > > > >Also clarify your needs. Do you need no-downtime for the VMs? If so, > >that's > >more complex. If you don't, it might be enough/simpler to deploy a new > >setup and just import the existing storage. Do you have HA VMs? etc. > > > > > >> > >> > >> The reason I need to move the HE VM is because we are decommissioning > >the > >> current storage array where the HE VM is located. > >> > > > >Good luck! > > > >Best regards, > > > > > >> > >> > >> Thank you very much > >> > >> *Anton Louw* > >> *Cloud Engineer: Storage and Virtualization* at *Vox* > >> ------------------------------ > >> *T:* 087 805 0000 | *D:* 087 805 1572 > >> *M:* N/A > >> *E:* anton.louw(a)voxtelecom.co.za > >> *A:* Rutherford Estate, 1 Scott Street, Waverley, Johannesburg > >> www.vox.co.za > >> > >> [image: F] <https://www.facebook.com/voxtelecomZA> > >> [image: T] <https://www.twitter.com/voxtelecom> > >> [image: I] <https://www.instagram.com/voxtelecomza/> > >> [image: L] <https://www.linkedin.com/company/voxtelecom> > >> [image: Y] <https://www.youtube.com/user/VoxTelecom> > >> > >> [image: #VoxBrand] > >> <https://www.vox.co.za/fibre/fibre-to-the-home/?prod=HOME> > >> *Disclaimer* > >> > >> The contents of this email are confidential to the sender and the > >intended > >> recipient. Unless the contents are clearly and entirely of a personal > >> nature, they are subject to copyright in favour of the holding > >company of > >> the Vox group of companies. Any recipient who receives this email in > >error > >> should immediately report the error to the sender and permanently > >delete > >> this email from all storage devices. > >> > >> This email has been scanned for viruses and malware, and may have > >been > >> automatically archived by *Mimecast Ltd*, an innovator in Software as > >a > >> Service (SaaS) for business. Providing a *safer* and *more useful* > >place > >> for your human generated data. Specializing in; Security, archiving > >and > >> compliance. To find out more Click Here > >> <https://www.voxtelecom.co.za/security/mimecast/?prod=Enterprise>. > >> > >> > >> _______________________________________________ > >> Users mailing list -- users(a)ovirt.org > >> To unsubscribe send an email to users-leave(a)ovirt.org > >> Privacy Statement: https://www.ovirt.org/privacy-policy.html > >> oVirt Code of Conduct: > >> https://www.ovirt.org/community/about/community-guidelines/ > >> List Archives: > >> > > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/V3PRBRZD7SLUQ… > >> > > If youchange the gluster volume you can use the 'hosted-engine' tool + > migration of the data ? > > The example is for Gluster, but also > hosted-engine --set-shared-config storage <server1>:/engine > > hosted-engine --set-shared-config mnt_options > backup-volfile-servers=<server2>:<server3> > > Best Regards, > Strahil Nikolov > > -- Didi

1 0

Failed to complete VM creation,help me!
by liug74＠sina.com 29 Apr '20

29 Apr '20

Storage domain usage is as follows： vgdisplay 3542ca36-747b-407c-aa5e-331510f81fd9 --- Volume group --- VG Name 3542ca36-747b-407c-aa5e-331510f81fd9 System ID Format lvm2 Metadata Areas 2 Metadata Sequence No 15998 VG Access read/write VG Status resizable MAX LV 0 Cur LV 1954 Open LV 0 Max PV 0 Cur PV 1 Act PV 1 VG Size 113.97 TiB PE Size 128.00 MiB Total PE 933647 Alloc PE / Size 64930 / <7.93 TiB Free PE / Size 868717 / 106.04 TiB VG UUID GiL1LL-ggO5-a6mX-62uc-q597-B3X9-6bzC93 __________________________________________________________ The following error occurred when I created the VM: VDSM H5 command HSMGetAllTasksStatusesVDS failed: Error creating a new volume: (u"Volume creation 62220be2-2781-4771-9373-84af5cc18f01 failed: (28, 'Sanlock resource write failure', 'No space left on device')",) Excuse me, what's the reason, thank you!

3 2

ovrt node ng 4.4 different fs layout and error if changed
by Gianluca Cecchi 29 Apr '20

29 Apr '20

Hello, In CentOS 7 default filesystem in anaconda was xfs, but in ovirt node ng 4.3.9 (based on CentOS 7) the default layout was set to ext4. In CentOS 8 again the default is xfs and I see that ovirt node ng 4.4 beta4 (based on CentOS 8.1) has now xfs for all filesystems, excluded /boot that is set to ext4. In general I have a preference for ext4. I notice that while in 4.3.9 I could somehow customize partition layout, even if not recommended, in 4.4 I always get error if I don't accept automatic partitioning. What I sometimes do: - select disk and custom layout - click done and the storage page appears - I click the button to create automatically and I get the automatic partitioning layout - and here I can change fs type and update settings button and/or change size of some filesystems (eg for /var/log if using Gluster) Even if I only set all filesystems automatically generated by installer to ext4, without changing any size, in the final stage of installation I get this error and installation aborts: " There was an error running the kickstart script at line 5. This is a fatal error and installation will be aborted. The details of this error are: 2020-04-19 10:37:50,451 [INFO] (MainThread) Trying to create a manageable base from '/' 2020-04-19 10:37:50,811 [ERROR] (MainThread) LVM Thin Provisioning partitioning scheme is required. For autoinstall via Kickstart with LVM Thin Provisioning check options: --thinpool and --grow. Please consult documentation for details Traceback (most recent call last): File "/usr/lib64/python3.6/runpy.py", line 193, in _run_module_as_main "__main__", mod_spec) File "/usr/lib64/python3.6/runpy.py", line 85, in _run_code exec(code, run_globals) File "/usr/lib/python3.6/site-packages/imgbased/__main__.py", line 53, in <module> CliApplication() File "/usr/lib/python3.6/site-packages/imgbased/__init__.py", line 82, in CliApplication app.hooks.emit("post-arg-parse", args) File "/usr/lib/python3.6/site-packages/imgbased/hooks.py", line 120, in emit cb(self.context, *args) File "/usr/lib/python3.6/site-packages/imgbased/plugins/core.py", line 171, in post_argparse layout.initialize(args.source, args.init_nvr) File "/usr/lib/python3.6/site-packages/imgbased/plugins/core.py", line 215, in initialize self.app.imgbase.init_layout_from(source, init_nvr) File "/usr/lib/python3.6/site-packages/imgbased/imgbase.py", line 293, in init_layout_from self.init_tags_on(existing_lv) File "/usr/lib/python3.6/site-packages/imgbased/imgbase.py", line 271, in init_tags_on pool = lv.thinpool() File "/usr/lib/python3.6/site-packages/imgbased/lvm.py", line 305, in thinpool raise MissingLvmThinPool() imgbased.lvm.MissingLvmThinPool " If I change nothing and choose automatic partitioning the installation completes. Tried different times with same results. Is it expected? In this case instead of specifying "recommended" it should be written sort of "mandatory"... Gianluca

2 1

Problem with multiple IP addresses and AWX
by Bernhard Dick 29 Apr '20

29 Apr '20

Hi, I've started to use awx shortly and I'd like to have an inventory based on their RHEV/oVirt-Plugin. Basically that works fine, however on machines that have multiple network interfaces or internal nets (like Docker) the first address in the IP list of the vm (which is used as ansible_host by AWX) is not an address that is reachable from the machine's outside and so those host entries are failing in my jobs. I found an issue at AWX, being like we won't fix first: https://github.com/ansible/awx/issues/1191 It also seems that there where issues related to this on oVirt: First this with a request for setting a primary IP: https://bugzilla.redhat.com/show_bug.cgi?id=1437145 And this one mentioning a way to ignore interfaces on ovirt-guest-agent, however it does no longer work due to the use of qemu-guest-agent: https://bugzilla.redhat.com/show_bug.cgi?id=1437145 Do you have any ideas how to circumvent this or is there some improvement alread in planning? Best regards Bernhard

1 0

Re: User Groups
by Lucie Leistnerova 29 Apr '20

29 Apr '20

On 4/29/20 9:35 AM, Anton Louw wrote: > > > Hi Paul, > > Thanks. Its just strange, because when I want to assign group > permissions to a VM for instance, I get the below: > > But when I check, Administration, Users then select Groups, I only see > the below: > These are the groups added to RHV manually (check button Add or Administration - Configure - System Permissions - Add) and Everyone (built-in group). So they can be used to assign permissions. > > Am I missing something? > > Thanks > > > *Anton Louw* > *Cloud Engineer: Storage and Virtualization* at *Vox* > ------------------------------------------------------------------------ > *T:* 087 805 0000 | *D:* 087 805 1572 > *M:* N/A > *E:* anton.louw(a)voxtelecom.co.za <mailto:anton.louw@voxtelecom.co.za> > *A:* Rutherford Estate, 1 Scott Street, Waverley, Johannesburg > www.vox.co.za <http://www.vox.co.za> > > F <https://www.facebook.com/voxtelecomZA> > > > T <https://www.twitter.com/voxtelecom> > > > I <https://www.instagram.com/voxtelecomza/> > > > L <https://www.linkedin.com/company/voxtelecom> > > > Y <https://www.youtube.com/user/VoxTelecom> > > > *From:*Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk> > *Sent:* 29 April 2020 09:28 > *To:* Anton Louw <Anton.Louw(a)voxtelecom.co.za>; users(a)ovirt.org > *Subject:* Re: User Groups > > Hello Anton, > > In the Administration->Users there is a groups > button. > > Regards, > > Paul S. > > ------------------------------------------------------------------------ > > *From:*Anton Louw <Anton.Louw(a)voxtelecom.co.za > <mailto:Anton.Louw@voxtelecom.co.za>> > *Sent:* 29 April 2020 06:36 > *To:* users(a)ovirt.org <mailto:users@ovirt.org> <users(a)ovirt.org > <mailto:users@ovirt.org>> > *Subject:* [ovirt-users] User Groups > > *Caution External Mail:* Do not click any links or open any > attachments unless you trust the sender and know that the content is safe. > > Hi Everybody, > > Is there a way to see My Groups through the Web UI? I have tried > looking around, but cannot see anything. Can this only be seen via the > backend in the HE? > > Thanks > > *Anton Louw* > > *Cloud Engineer: Storage and Virtualization*at *Vox* > > ------------------------------------------------------------------------ > > *T:*087 805 0000 | *D:*087 805 1572 > *M:*N/A > *E:*anton.louw@voxtelecom.co.za <mailto:anton.louw@voxtelecom.co.za> > *A:*Rutherford Estate, 1 Scott Street, Waverley, Johannesburg > www.vox.co.za > <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.vox.co…> > > F > <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.faceb…> > > > > T > <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.twitt…> > > > > I > <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.insta…> > > > > L > <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.linke…> > > > > Y > <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.youtu…> > > #VoxBrand > <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.vox.c…> > > > *Disclaimer* > > The contents of this email are confidential to the sender and the > intended recipient. Unless the contents are clearly and entirely of a > personal nature, they are subject to copyright in favour of the > holding company of the Vox group of companies. Any recipient who > receives this email in error should immediately report the error to > the sender and permanently delete this email from all storage devices. > > This email has been scanned for viruses and malware, and may have been > automatically archived by *Mimecast Ltd*, an innovator in Software as > a Service (SaaS) for business. Providing a *safer* and *more useful* > place for your human generated data. Specializing in; Security, > archiving and compliance. To find out more Click Here > <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.voxte…>. > > To view the terms under which this email is distributed, please go to:- > http://leedsbeckett.ac.uk/disclaimer/email/ > > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/EOORL4GYWM5XS… -- Lucie Leistnerova Senior Quality Engineer, QE Cloud, RHVM Red Hat EMEA IRC: lleistne @ #rhev-qe

1 0

Can't ping gluster interfaces for HCI setup
by Shareef Jalloq 29 Apr '20

29 Apr '20

Hi, I'm in the process of trying to set up an HCI 3 node cluster in my homelab to better understand the Gluster setup and have failed at the first hurdle. I've set up the node interfaces on the built in NIC and am using a PCI NIC for the Gluster traffic - at the moment this is 1Gb until I can upgrade - and I've assigned a static IP to both interfaces and also have both entries in my DNS. From any of the three nodes, I can ping the gateway, the other nodes, any external IP but I can't ping any of the Gluster NICs. What have I forgotten to do? Here's the relevant output of 'ip addr show'. em1 is the motherboard NIC and p1p1 is port 1 of an Intel NIC. The /etc/sysconfig/network-scripts/ifcfg-<if> scripts are identical aside from IPADDR, NAME, DEVICE and UUID fields. Thanks, Shareef. [root@ovirt-node-00 ~]# ip addr show 2: p1p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether a0:36:9f:1f:f9:78 brd ff:ff:ff:ff:ff:ff inet 10.0.0.34/24 brd 10.0.0.255 scope global noprefixroute p1p1 valid_lft forever preferred_lft forever inet6 fd4d:e9e3:6f5:1:a236:9fff:fe1f:f978/64 scope global mngtmpaddr dynamic valid_lft 7054sec preferred_lft 7054sec inet6 fe80::a236:9fff:fe1f:f978/64 scope link valid_lft forever preferred_lft forever 4: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 98:90:96:a1:16:ad brd ff:ff:ff:ff:ff:ff inet 10.0.0.31/24 brd 10.0.0.255 scope global noprefixroute em1 valid_lft forever preferred_lft forever inet6 fd4d:e9e3:6f5:1:9a90:96ff:fea1:16ad/64 scope global mngtmpaddr dynamic valid_lft 7054sec preferred_lft 7054sec inet6 fe80::9a90:96ff:fea1:16ad/64 scope link valid_lft forever preferred_lft forever

3 11

Re: User Groups
by Staniforth, Paul 29 Apr '20

29 Apr '20

Hi Anton, have you got an external authentication system? if you add the external groups with the correct roles to the correct object (e.g. datacenter) it will then show in the list of grpups. Regards, Paul S. ________________________________ From: Anton Louw <Anton.Louw(a)voxtelecom.co.za> Sent: 29 April 2020 08:35 To: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk>; users(a)ovirt.org <users(a)ovirt.org> Subject: RE: User Groups Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe. Hi Paul, Thanks. Its just strange, because when I want to assign group permissions to a VM for instance, I get the below: [cid:image003.png@01D61E09.7EB68C80] But when I check, Administration, Users then select Groups, I only see the below: [cid:image002.png@01D61E09.7EAC5350] Am I missing something? Thanks Anton Louw Cloud Engineer: Storage and Virtualization at Vox ________________________________ T: 087 805 0000 | D: 087 805 1572 M: N/A E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za> A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg www.vox.co.za<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.vox.co…> [F]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.faceb…> [T]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.twitt…> [I]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.insta…> [L]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.linke…> [Y]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.youtu…> From: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk> Sent: 29 April 2020 09:28 To: Anton Louw <Anton.Louw(a)voxtelecom.co.za>; users(a)ovirt.org Subject: Re: User Groups Hello Anton, In the Administration->Users there is a groups button. Regards, Paul S. ________________________________ From: Anton Louw <Anton.Louw(a)voxtelecom.co.za<mailto:Anton.Louw@voxtelecom.co.za>> Sent: 29 April 2020 06:36 To: users(a)ovirt.org<mailto:users@ovirt.org> <users(a)ovirt.org<mailto:users@ovirt.org>> Subject: [ovirt-users] User Groups Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe. Hi Everybody, Is there a way to see My Groups through the Web UI? I have tried looking around, but cannot see anything. Can this only be seen via the backend in the HE? Thanks Anton Louw Cloud Engineer: Storage and Virtualization at Vox ________________________________ T: 087 805 0000 | D: 087 805 1572 M: N/A E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za> A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg www.vox.co.za<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.vox.co…> [F]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.faceb…> [T]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.twitt…> [I]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.insta…> [L]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.linke…> [Y]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.youtu…> [#VoxBrand]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.vox.c…> Disclaimer The contents of this email are confidential to the sender and the intended recipient. Unless the contents are clearly and entirely of a personal nature, they are subject to copyright in favour of the holding company of the Vox group of companies. Any recipient who receives this email in error should immediately report the error to the sender and permanently delete this email from all storage devices. This email has been scanned for viruses and malware, and may have been automatically archived by Mimecast Ltd, an innovator in Software as a Service (SaaS) for business. Providing a safer and more useful place for your human generated data. Specializing in; Security, archiving and compliance. To find out more Click Here<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.voxte…>. To view the terms under which this email is distributed, please go to:- http://leedsbeckett.ac.uk/disclaimer/email/ To view the terms under which this email is distributed, please go to:- http://leedsbeckett.ac.uk/disclaimer/email/

1 0

Re: User Groups
by Lucie Leistnerova 29 Apr '20

29 Apr '20

Hi Anton, On 4/29/20 7:36 AM, Anton Louw wrote: > > > Hi Everybody, > > Is there a way to see My Groups through the Web UI? I have tried > looking around, but cannot see anything. Can this only be seen via the > backend in the HE? > All information about users you can see in Administration - Users and click on User name. I'm not aware of other information about the users in UI. > > Thanks > > > *Anton Louw* > *Cloud Engineer: Storage and Virtualization* at *Vox* > ------------------------------------------------------------------------ > *T:* 087 805 0000 | *D:* 087 805 1572 > *M:* N/A > *E:* anton.louw(a)voxtelecom.co.za <mailto:anton.louw@voxtelecom.co.za> > *A:* Rutherford Estate, 1 Scott Street, Waverley, Johannesburg > www.vox.co.za <http://www.vox.co.za> > > F <https://www.facebook.com/voxtelecomZA> > > > T <https://www.twitter.com/voxtelecom> > > > I <https://www.instagram.com/voxtelecomza/> > > > L <https://www.linkedin.com/company/voxtelecom> > > > Y <https://www.youtube.com/user/VoxTelecom> > > #VoxBrand <https://www.vox.co.za/fibre/fibre-to-the-home/?prod=HOME> > > > *Disclaimer* > > The contents of this email are confidential to the sender and the > intended recipient. Unless the contents are clearly and entirely of a > personal nature, they are subject to copyright in favour of the > holding company of the Vox group of companies. Any recipient who > receives this email in error should immediately report the error to > the sender and permanently delete this email from all storage devices. > > This email has been scanned for viruses and malware, and may have been > automatically archived by *Mimecast Ltd*, an innovator in Software as > a Service (SaaS) for business. Providing a *safer* and *more useful* > place for your human generated data. Specializing in; Security, > archiving and compliance. To find out more Click Here > <https://www.voxtelecom.co.za/security/mimecast/?prod=Enterprise>. > > > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/B2275QLUWDTKM… Best regards, -- Lucie Leistnerova Senior Quality Engineer, QE Cloud, RHVM Red Hat EMEA IRC: lleistne @ #rhev-qe

1 0