- Users - oVirt List Archives

disk snapshot in illegal status
by David David 16 Apr '20

16 Apr '20

hello after removing "auto generated" snapshot, the vm snapshot became to illegal status and in the "snapshot" tab also marked in illegal status now my vm is not booting but "vdsm-client Volume getInfo" shows the snapshot status is legal vdsm-client Volume getInfo \ storagepoolID=00000000-0000-0000-0000-000000000000 \ storagedomainID=d17aa967-f7f7-4d9f-98e4-7022854da4f5 \ imageID=1844873e-45ef-4a2b-a991-2df6e92a3e2d \ volumeID=f447cd4f-9ab3-489d-8c2a-b2e69456496f { "status": "OK", "lease": { "path": "/dev/d17aa967-f7f7-4d9f-98e4-7022854da4f5/leases", "owners": [], "version": null, "offset": 132120576 }, "domain": "d17aa967-f7f7-4d9f-98e4-7022854da4f5", "capacity": "21474836480", "voltype": "LEAF", "description": "None", "parent": "00000000-0000-0000-0000-000000000000", "format": "RAW", "generation": 1, "image": "1844873e-45ef-4a2b-a991-2df6e92a3e2d", "uuid": "f447cd4f-9ab3-489d-8c2a-b2e69456496f", "disktype": "DATA", "legality": "LEGAL", "mtime": "0", "apparentsize": "21474836480", "truesize": "21474836480", "type": "PREALLOCATED", "children": [], "pool": "", "ctime": "1530472945" } how to fix the problem?

2 4

ovirt-engine unresponsive - how to rescue?
by Shareef Jalloq 16 Apr '20

16 Apr '20

So my engine has gone down and I can't ssh into it either. If I try to log into the web-ui of the node it is running on, I get redirected because the node can't reach the engine. What are my next steps? Shareef.

4 35

yum mirrors 403 forbidden
by Shareef Jalloq 16 Apr '20

16 Apr '20

I seem to be taking 2 steps back and 1 forward at the moment. What could I have done on a node to start getting 403 forbidden errors when using yum? [root@ovirt-node-00 ~]# yum repolist Loaded plugins: enabled_repos_upload, fastestmirror, imgbased-persist, package_upload, product-id, search-disabled-repos, vdsmupgrade, versionlock Loading mirror speeds from cached hostfile ovirt-4.3-epel/x86_64/metalink | 13 kB 00:00:00 * ovirt-4.3-epel: mirror.de.leaseweb.net http://mirror.centos.org/centos/7/sclo/x86_64/rh/repodata/repomd.xml: [Errno 14] HTTP Error 403 - Forbidden Trying other mirror. To address this issue please refer to the below wiki article https://wiki.centos.org/yum-errors If above article doesn't help to resolve this issue please use https://bugs.centos.org/. http://mirror.centos.org/centos/7/sclo/x86_64/rh/repodata/repomd.xml: [Errno 14] HTTP Error 403 - Forbidden Trying other mirror. ovirt-4.3/7 | 3.0 kB 00:00:00 http://mirror.centos.org/centos/7/storage/x86_64/gluster-6/repodata/repomd.…: [Errno 14] HTTP Error 403 - Forbidden Trying other mirror. http://mirror.centos.org/centos/7/opstools/x86_64/repodata/repomd.xml: [Errno 14] HTTP Error 403 - Forbidden Trying other mirror. http://mirror.centos.org/centos/7/virt/x86_64/ovirt-4.3/repodata/repomd.xml: [Errno 14] HTTP Error 403 - Forbidden Trying other mirror. http://mirror.centos.org/centos/7/virt/x86_64/kvm-common/repodata/repomd.xml: [Errno 14] HTTP Error 403 - Forbidden Trying other mirror. http://fedorapeople.org/groups/virt/virtio-win/repo/latest/repodata/repomd.…: [Errno 14] HTTP Error 403 - Forbidden Trying other mirror. sac-gluster-ansible/x86_64 | 3.3 kB 00:00:00 repo id repo name status centos-sclo-rh-release/x86_64 CentOS-7 - SCLo rh 0 ovirt-4.3/7 Latest oVirt 4.3 Release 2,831 ovirt-4.3-centos-gluster6/x86_64 CentOS-7 - Gluster 6 0 ovirt-4.3-centos-opstools/x86_64 CentOS-7 - OpsTools - release 0 ovirt-4.3-centos-ovirt43/x86_64 CentOS-7 - oVirt 4.3 0 ovirt-4.3-centos-qemu-ev/x86_64 CentOS-7 - QEMU EV 0 ovirt-4.3-epel/x86_64 Extra Packages for Enterprise Linux 7 - x86_64 13,244 ovirt-4.3-virtio-win-latest virtio-win builds roughly matching what will be shipped in upcoming RHEL 0 sac-gluster-ansible/x86_64 Copr repo for gluster-ansible owned by sac 18 repolist: 16,093 Uploading Enabled Repositories Report Cannot upload enabled repos report, is this client registered?

2 3

cloud-init ovirt
by PunkGeek 16 Apr '20

16 Apr '20

Hello, How can I use ovirt tools that configure cloud-init vms by python? https://red.ht/2K1gBkn Actually, I want just to use this tool in my python libvirt script. Best regards

2 1

Can't migrate over migration network
by briandumont＠gmail.com 15 Apr '20

15 Apr '20

Hello, I am trying to configure a dedicated migration network and am unable to get it to work. It is failing with a no route to host error in the cockpit logs, specifically a libvirtd error virNetSocketNewConnectTCP:591 : unable to connect to server at '192.168.1.50:49152': No route to host. Trying to migrate from Host 1 to Host 2. 192.168.1.50 is the ip address on the source host for the migration. If I try to migrate in the other direction I get the same error with tthat hosts migration network ip. My migration network is setup on a different VLAN than my ovirtmgmt network. Here is my configuration: - 2 Hosts - Host 1 - nic 1 - ovirtmgmt - 192.168.1.24/24 - VLAN 1 - nic 2 - migration network - 192.168.1.50/24 VLAN 25 - Host 2 - nic 1 - ovirtmgmnt - 192.168.1.24/24 - VLAN 1 - nic 2 - migration network - 192.168.1.51/24 - VLAN 25 Migration network is setup as follows: - Assign - Yes - Required - Yes - VM Network - No (tried it with VM Nework = Yes with same results) - Migration Network - Yes I think I've got something fundamentally wrong with my host networking but I can't figure it out. Appreciate the help.

4 11

NUMA Pinning bug with Hugepages?
by Alan G 15 Apr '20

15 Apr '20

Hi, I seem to have found an issue when trying to setup a high performance VM utilising hugepages and NUMA pinning. The VM is configured for 32GB RAM and uses hugepages of size 1G. The host has two NUMA nodes each having 64GB RAM (for 128GB total system RAM). No other VMs are running or otherwise pinned to the host. The VM is pinned to node 0. And the required hugepages are allocated with echo 32 > /sys/devices/system/node/node0/hugepages/hugepages-1048576kB/nr_hugepages I then attempt to start the VM and get a pop-up error saying "cannot accommodate memory of VM's pinned virtual NUMA nodes within host's physical NUMA nodes". However, if I remove the hugepages from node 0 echo 0 > /sys/devices/system/node/node0/hugepages/hugepages-1048576kB/nr_hugepages Start the VM and then immediately re-create the hugepqages then everything works as expected. It seems to me that oVirt is considering the hugepages as allocated memory even if they are not in use. Is this correct? Thanks, Alan

3 3

upgrade VM cluster compatibility version
by Bill James 15 Apr '20

15 Apr '20

I'm trying to upgrade my cluster to 4.3. Currently its running 4.2.8.2-1.el7. But the cluster compatibility version is 3.6. I try to change that and it says I need to edit the VM. https://www.ovirt.org/documentation/upgrade-guide/chap-Post-Upgrade_Tasks.h… says: *Important:* An error message may warn that some virtual machines and templates are incorrectly configured. To fix this error, edit each virtual machine manually. The *Edit Virtual Machine* window provides additional validations and warnings that show what to correct. Sometimes the issue is automatically corrected and the virtual machine’s configuration just needs to be saved again. After editing each virtual machine, you will be able to change the cluster compatibility version. I edit the VM and there are no errors or warnings. I see no way to change the cluster compatibility level on a VM. How do I change the Custom Compatibility Version?? -- This email, its contents and attachments contain information from J2 Global, Inc. and/or its affiliates which may be privileged, confidential or otherwise protected from disclosure. The information is intended to be for the addressee(s) only. If you are not an addressee, any disclosure, copy, distribution or use of the contents of this message is prohibited. If you have received this email in error, please notify the sender by reply email and delete the original message and any copies.

2 2

Get OAuth token locally without password?
by Chris Adams 14 Apr '20

14 Apr '20

I'm working on a cron job to run on the engine to do some tasks via the API. Is there a way I can get an API OAuth token created without actually storing a password? For example, some script that can be run to directly create a session in the database and return the token. Obviously this _can_ be done, it's a matter of knowing the right bits to do (so basically wondering if that has already been written). I only have internal users, so no external authentication store available. -- Chris Adams <cma(a)cmadams.net>

2 1

Migrate engine to another storage domain?
by Simon Nylund 14 Apr '20

14 Apr '20

Is there a successful way of migrating an up and running engine to another storage domain? I've been reading through the archive and tested a few various ways without any success. The only way i found working without errors was deploying a new engine attached to the new storage domain, and import the old data domain for the vms, but then you lose all the settings for the previous engine (ofc). And have to redo all of that.

1 0

export vm from 3.4 to 4.3
by Budur Nagaraju 14 Apr '20

14 Apr '20

Hi Can someone help in exporting a vm from 3.5 to 4.3 version , any help or links for exporting a vm ? Thanks, Nagaraju

4 5