- Users - oVirt List Archives

virt-v2v paused by system after one hour or a bit more
by Claus Serbe 22 Mar '24

22 Mar '24

Hi, I am migrating some vmware VM's from an NFS Storage via rhv-upload in virt-v2v, what is working good. But now I try to move some bigger VM's with several disks and sadly after a while (I would guess around an hour) the Ovirt-engine shows me "Paused by system" instead of transfering, so when the next disk should be imported, it will fail In the ovirt-engine.log I see the following lines for the remaining 4 disks. 2024-03-21 06:14:06,815-04 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-35) [f61b3906-804d-470f-8524-6507081fbdec] EVENT_ID: UPLOAD_IMAGE_PAUSED_BY_SYSTEM_TIMEOUT(1,071), Upload was paused by system. Reason: timeout due to transfer inactivity. 2024-03-21 06:14:17,915-04 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-14) [aef8e312-d811-4a39-b5fb-342157209bce] EVENT_ID: UPLOAD_IMAGE_PAUSED_BY_SYSTEM_TIMEOUT(1,071), Upload was paused by system. Reason: timeout due to transfer inactivity. 2024-03-21 06:14:24,959-04 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-85) [860b012d-78a4-49f8-a875-52f4299c8298] EVENT_ID: UPLOAD_IMAGE_PAUSED_BY_SYSTEM_TIMEOUT(1,071), Upload was paused by system. Reason: timeout due to transfer inactivity. 2024-03-21 06:14:46,099-04 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-65) [f93869ee-2ecb-4f54-b3e9-b12259637b0b] EVENT_ID: UPLOAD_IMAGE_PAUSED_BY_SYSTEM_TIMEOUT(1,071), Upload was paused by system. Reason: timeout due to transfer inactivity. There are 2 strange things. 1. When I start virt-v2v it will create all 6 disks and set them to transferring, but virt-v2v will import one after the other, what leads to kind of unused/timing out transferring tickets. 2. When I copy the disk images to a local disk before, it works. Maybe just because of faster transfer speeds. Is there a possibility to transfer parallel or maybe extend the timeout? Cause basically everything is working, but it's just timing out Thanks in advance for any suggestions

3 3

Deploy oVirt Engine fail behind proxy
by Matteo Bonardi 22 Mar '24

22 Mar '24

Hi, I am trying to deploy the ovirt engine following self-hosted engine installation procedure on documentation. Deployment servers are behind a proxy and I have set it in environment and in yum.conf before run deploy. Deploy fails because ovirt engine vm cannot resolve AppStream repository url: [ INFO ] TASK [ovirt.engine-setup : Install oVirt Engine package] [ ERROR ] fatal: [localhost -> ovirt-manager.mydomain]: FAILED! => {"changed": false, "msg": "Failed to download metadata for repo 'AppStream': Cannot prepare internal mirrorlist: Curl error (6): Couldn't resolve host name for http://mirrorlist.centos.org/?release=8&arch=x86_64&repo=AppStream&infra=st… [Could not resolve host: mirrorlist.centos.org]", "rc": 1, "results": []} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook [ INFO ] Stage: Clean up [ INFO ] Cleaning temporary resources [ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fetch logs from the engine VM] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set destination directory path] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Create destination directory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Find the local appliance image] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set local_vm_disk_path] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Give the vm time to flush dirty buffers] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Copy engine logs] [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Remove local vm dir] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Remove temporary entry in /etc/hosts for the local VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Clean local storage pools] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Destroy local storage-pool {{ he_local_vm_dir | basename }}] [ INFO ] TASK [ovirt.hosted_engine_setup : Undefine local storage-pool {{ he_local_vm_dir | basename }}] [ INFO ] TASK [ovirt.hosted_engine_setup : Destroy local storage-pool {{ local_vm_disk_path.split('/')[5] }}] [ INFO ] TASK [ovirt.hosted_engine_setup : Undefine local storage-pool {{ local_vm_disk_path.split('/')[5] }}] [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20201109165237.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Hosted Engine deployment failed: please check the logs for the issue, fix accordingly or re-deploy from scratch. Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20201109164244-b3e8sd.log How I can set proxy for the engine vm? Ovirt version: [root@myhost ~]# rpm -qa | grep ovirt-engine-appliance ovirt-engine-appliance-4.4-20200916125954.1.el8.x86_64 [root@myhost ~]# rpm -qa | grep ovirt-hosted-engine-setup ovirt-hosted-engine-setup-2.4.6-1.el8.noarch OS version: [root@myhost ~]# cat /etc/centos-release CentOS Linux release 8.2.2004 (Core) [root@myhost ~]# uname -a Linux myhost.mydomain 4.18.0-193.28.1.el8_2.x86_64 #1 SMP Thu Oct 22 00:20:22 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux Thanks for the help. Regards, Matteo

7 20

Creating disks works for XML (sort of) but not JSON
by itsavant＠gmail.com 21 Mar '24

21 Mar '24

https://ovirt.github.io/ovirt-engine-api-model/4.5/#services/disks POST /ovirt-engine/api/disks <disk> <storage_domains> <storage_domain id="123"/> </storage_domains> <name>mydisk</name> <provisioned_size>1048576</provisioned_size> <format>cow</format> </disk> First off <storage_domain id="123"/> as a field is ridiculous because there is no JSON equivalent I can determine. Next Why is this a good XML structure? <storage_domains><storage_domain><name>MyStorageDomainName</name></storage_domain></storage_domains> But this is not <storage_domains><storage_domain><id>7aaa2d33-c7ba-46f0-b4fd-4cf48a724e8d</id></storage_domain></storage_domains> Next when trying to create a new disk directly on a VM POST /ovirt-engine/api/vms/396bc7c9-ed4a-4209-b9fd-f93e9a47cd31/diskattachments Name works for XML: <disk_attachment> <bootable>true</bootable> <interface>virtio</interface> <active>true</active> <disk> <description>Boot Disk</description> <format>cow</format> <name>mybootdisk</name> <provisioned_size>1048576</provisioned_size> <storage_domains> <storage_domain> <name>MyStorageDomainName</name> </storage_domain> </storage_domains> </disk> </disk_attachment> But Not for JSON { "bootable": "true", "interface": "virtio", "active": "true", "disk": { "description": "Boot Disk", "format": "cow", "name": "mybootdisk", "provisioned_size": "1048576", "storage_domains": { "storage_domain": { "name": "MyStorageDomainName" } } } } And ID fails for both I think the REST API for creating disks needs some real help. They are deprecating the only one that actually works right /ovirt-engine/api/storagedomains/123/disks Does anyone have the correct syntax in JSON, because the available documentation is almost entirely devoid of any, AND the server response..... wait for it...... "The remote server returned an error: (400) Bad Request." .....that is all

1 0

oVirt manager page fails with "500 error" after fresh install of oVirt 4.4.10 manager on Rocky Linux 8.9
by mr_tim_walsh＠hotmail.com 21 Mar '24

21 Mar '24

I did a clean install of oVirt manager 4.4.10 on a clean Rocky Linux 8.9. I have found I get through installing and running "engine-setup" successfully without errors. The manager web site errors on "500 internal server error" but the Grafana site works without a problem. I seem to be missing one step or one configuration setting. I'm working with Rocky Linux 8.9 and oVirt 4.4.10 partially to plan for migration, but also because I have older hardware at home I am using to sandbox with. I also plan to test upgrading from CentOS 7.9 with oVirt 4.3.10, so I want to make sure I have a solid installation method Rocky Linux 8.9 and oVirt 4.4.10. (my current method for installing CentOS 7.9 with oVirt 4.3.10 works flawless on hardware, and VMs). When following the documentation for installing oVirt standalone manager on Enterprise Linux on the oVirt web site: https://www.ovirt.org/documentation/installing_ovirt_as_a_standalone_manage… There’s a section specific to "RedHat derivatives" – specifically Rocky Linux https://www.ovirt.org/download/install_on_rhel.html I followed the steps to the best of my ability. Here are the specific steps I took: installed Rocky Linux - minimal install, added "system tools" when that boots up I run these commands in this order: dnf distro-sync --nobest dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44.rpm dnf module -y enable javapackages-tools dnf module -y enable pki-deps dnf module -y enable postgresql:12 dnf module -y enable mod_auth_openidc:2.3 dnf module -y enable nodejs:14 dnf install -y https://resources.ovirt.org/pub/ovirt-4.4/rpm/el8/x86_64/ovirt-engine-appli… (this package gets installed when you run the command: dnf install ovirt-engine-appliance ) dnf install ovirt-engine -y engine-setup I found the documentation says to run adding repos first then install release 4.4 RPM but the Java repo errors out, so I install the RPM first. I could do that last and enable Java afterwards like this: ... everything else... dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44.rpm dnf module -y enable nodejs:14 Again, to summarize: I have followed the documentation to the best of my ability and the process succeeds, but it always fails on 500s on trying to launch the manager. The Grafana web site works fine. I should note on the same system I can install CentOS 7.9 and oVirt 4.3.10. It succeeds and works flawlessly. Like I said earlier, I must be missing one step or one configuration setting. Thanks in advance for any help you can provide.

1 0

Create Vm without Storage Domain
by Shafi Mohammed 21 Mar '24

21 Mar '24

Hi Team , I am new to Ovirt and have been using KVM off late . I use libvirt (virt or virsh commands) to create and manage Vms . I have a pretty basic doubt in OVirt . I was trying to migrate a VM from my KVM host .I copied my .qcow2 virtual disk to the ovirt host. I am able to create a Vm after uploading the disk to a new storage domain and create a VM with the storage domain. Can I create a VM without using a storage domain ( By directly attaching the copied .qcow2 disk ) to the Vm Regards Shafi

4 4

oVirt hosts mounting old storage domain even though it's not listed in the engine
by stanleym＠missouri.edu 20 Mar '24

20 Mar '24

We have an oVirt cluster with multiple hosts that continues to mount an old storage domain we used for ISO images. The engine does not show this old storage domain and I've even looked at the engine sql database and not found this old storage domain. Manually unmounting the ISO storage domain on the hosts doesn't fix it as it will remount within a few minutes. Is there some way to manually make vdsm stop remounting this old path? I didn't know if there is a way to regenerate those files from scratch. We've went through all our VMs and removed the cdroms even trying to get it to stop. We're going to try rebuilding a host from scratch to see if it's an artifact left on the host versus an artifact that's coming from the engine. Any help would be appreciated!

1 0

install node on centos stream 9 fails with message NetworkNotFoundError
by Jirka Simon 19 Mar '24

19 Mar '24

Hello oVirt community. i just tried to add a new host(wh refresh) to our cluster with installed Centos Stream 9, bud ovirt installation fails with message network not found. there are 4 NICs (2SPF one of them is configured) and 2 ethenrent which are not configured and are down here is end instalation log. any hint what can I check ? 2024-03-11 11:21:44 CET - { "uuid" : "c43fec42-2838-4319-8f00-adaf24351341", "counter" : 412, "stdout" : "fatal: [ovirt1.domain.tld]: FAILED! => {\"changed\": true, \"cmd\": [\"vdsm-tool\", \"ovn-config\", \"10.36.191.11\", \"ovirt1.domain.tld\"], \"delta\": \"0:00:02.236199\", \"end\": \"2024-03-11 11:21:43.909643\", \"msg\": \"non-zero return code\", \"rc\": 1, \"start\": \"2024-03-11 11:21:41.673444\", \"stderr\": \"Traceback (most recent call last):\\n File \\\"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\\\", line 117, in get_network\\n return networks[net_name]\\n KeyError: 'ovirt1.domain.tld'\\n\\nDuring handling of the above exception, another exception occurred:\\n\\nTraceback (most recent call last):\\n File \\\"/usr/bin/vdsm-tool\\\", line 195, in main\\n return tool_command[cmd][\\\"command\\\"](*arg s)\\n File \\\"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\\\", line 63, in ovn_config\\n ip_address = get_ip_addr(get_network(network_caps(), net_name))\\n File \\\"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\\\", line 11 9, in get_network\\n raise NetworkNotFoundError(net_name)\\nvdsm.tool.ovn_config.NetworkNotFoundError: ovirt1.domain.tld\", \"stderr_lines\": [\"Traceback (most recent call last):\", \" File \\\"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_conf ig.py\\\", line 117, in get_network\", \" return networks[net_name]\", \"KeyError: 'ovirt1.domain.tld'\", \"\", \"During handling of the above exception, another exception occurred:\", \"\", \"Traceback (most recent call last):\", \" File \\\"/us r/bin/vdsm-tool\\\", line 195, in main\", \" return tool_command[cmd][\\\"command\\\"](*args)\", \" File \\\"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\\\", line 63, in ovn_config\", \" ip_address = get_ip_addr(get_network(network_c aps(), net_name))\", \" File \\\"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\\\", line 119, in get_network\", \" raise NetworkNotFoundError(net_name)\", \"vdsm.tool.ovn_config.NetworkNotFoundError: ovirt1.domain.tld\"], \"stdout\": \ "\", \"stdout_lines\": []}", "start_line" : 414, "end_line" : 415, "runner_ident" : "ca3d44fb-7482-481b-97d3-66f2ba7c9d0b", "event" : "runner_on_failed", "pid" : 1520750, "created" : "2024-03-11T10:21:43.926054", "parent_uuid" : "00163e21-72be-4886-1543-000000000042", "event_data" : { "playbook" : "ovirt-host-deploy.yml", "playbook_uuid" : "4aa34ee9-1be3-4377-a573-ef33d837d406", "play" : "all", "play_uuid" : "00163e21-72be-4886-1543-000000000002", "play_pattern" : "all", "task" : "Configure OVN for oVirt", "task_uuid" : "00163e21-72be-4886-1543-000000000042", "task_action" : "ansible.builtin.command", "task_args" : "", "task_path" : "/usr/share/ovirt-engine/ansible-runner-service-project/project/roles/ovirt-provider-ovn-driver/tasks/configure.yml:43", "role" : "ovirt-provider-ovn-driver", "host" : "ovirt1.domain.tld", "remote_addr" : "ovirt1.domain.tld", "res" : { "changed" : true, "stdout" : "", "stderr" : "Traceback (most recent call last):\n File \"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\", line 117, in get_network\n return networks[net_name]\nKeyError: 'ovirt1.domain.tld'\n\nDuring handling of the above exceptio n, another exception occurred:\n\nTraceback (most recent call last):\n File \"/usr/bin/vdsm-tool\", line 195, in main\n return tool_command[cmd][\"command\"](*args)\n File \"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\", line 63, in ov n_config\n ip_address = get_ip_addr(get_network(network_caps(), net_name))\n File \"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\", line 119, in get_network\n raise NetworkNotFoundError(net_name)\nvdsm.tool.ovn_config.NetworkNotFoundE rror: ovirt1.domain.tld", "rc" : 1, "cmd" : [ "vdsm-tool", "ovn-config", "10.36.191.11", "ovirt1.domain.tld" ], "start" : "2024-03-11 11:21:41.673444", "end" : "2024-03-11 11:21:43.909643", "delta" : "0:00:02.236199", "msg" : "non-zero return code", "invocation" : { "module_args" : { "_raw_params" : "vdsm-tool ovn-config 10.36.191.11 ovirt1.domain.tld\n", "_uses_shell" : false, "expand_argument_vars" : true, "stdin_add_newline" : true, "strip_empty_ends" : true, "argv" : null, "chdir" : null, "executable" : null, "creates" : null, "removes" : null, "stdin" : null } }, "stdout_lines" : [ ], "stderr_lines" : [ "Traceback (most recent call last):", " File \"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\", line 117, in get_network", " return networks[net_name]", "KeyError: 'ovirt1.domain.tld'", "", "During handling of the above exception, another exception occurred:", "", "Traceback (most recent call last):", " File \"/usr/bin/vdsm-tool\", line 195, in main", " return tool_command[cmd][\"command\"](*args)", " File \"/usr/lib/python3.9/site-packages/vdsm/tool/ovn _config.py\", line 63, in ovn_config", " ip_address = get_ip_addr(get_network(network_caps(), net_name))", " File \"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\", line 119, in get_network", " raise NetworkNotFoundError(net_name)", "v dsm.tool.ovn_config.NetworkNotFoundError: ovirt1.domain.tld" ], "_ansible_no_log" : false }, "start" : "2024-03-11T10:21:41.493826", "end" : "2024-03-11T10:21:43.925759", "duration" : 2.431933, "ignore_errors" : null, "event_loop" : null, "uuid" : "c43fec42-2838-4319-8f00-adaf24351341" } } 2024-03-11 11:21:44 CET - { "uuid" : "c43fec42-2838-4319-8f00-adaf24351341", "counter" : 412, "stdout" : "fatal: [ovirt1.domain.tld]: FAILED! => {\"changed\": true, \"cmd\": [\"vdsm-tool\", \"ovn-config\", \"10.36.191.11\", \"ovirt1.domain.tld\"], \"delta\": \"0:00:02.236199\", \"end\": \"2024-03-11 11:21:43.909643\", \"msg\": \"non-zero return code\", \"rc\": 1, \"start\": \"2024-03-11 11:21:41.673444\", \"stderr\": \"Traceback (most recent call last):\\n File \\\"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\\\", line 117, in get_network\\n return networks[net_name]\\n KeyError: 'ovirt1.domain.tld'\\n\\nDuring handling of the above exception, another exception occurred:\\n\\nTraceback (most recent call last):\\n File \\\"/usr/bin/vdsm-tool\\\", line 195, in main\\n return tool_command[cmd][\\\"command\\\"](*arg s)\\n File \\\"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\\\", line 63, in ovn_config\\n ip_address = get_ip_addr(get_network(network_caps(), net_name))\\n File \\\"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\\\", line 11 9, in get_network\\n raise NetworkNotFoundError(net_name)\\nvdsm.tool.ovn_config.NetworkNotFoundError: ovirt1.domain.tld\", \"stderr_lines\": [\"Traceback (most recent call last):\", \" File \\\"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_conf ig.py\\\", line 117, in get_network\", \" return networks[net_name]\", \"KeyError: 'ovirt1.domain.tld'\", \"\", \"During handling of the above exception, another exception occurred:\", \"\", \"Traceback (most recent call last):\", \" File \\\"/us r/bin/vdsm-tool\\\", line 195, in main\", \" return tool_command[cmd][\\\"command\\\"](*args)\", \" File \\\"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\\\", line 63, in ovn_config\", \" ip_address = get_ip_addr(get_network(network_c aps(), net_name))\", \" File \\\"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\\\", line 119, in get_network\", \" raise NetworkNotFoundError(net_name)\", \"vdsm.tool.ovn_config.NetworkNotFoundError: ovirt1.domain.tld\"], \"stdout\": \ "\", \"stdout_lines\": []}", "start_line" : 414, "end_line" : 415, "runner_ident" : "ca3d44fb-7482-481b-97d3-66f2ba7c9d0b", "event" : "runner_on_failed", "pid" : 1520750, "created" : "2024-03-11T10:21:43.926054", "parent_uuid" : "00163e21-72be-4886-1543-000000000042", "event_data" : { "playbook" : "ovirt-host-deploy.yml", "playbook_uuid" : "4aa34ee9-1be3-4377-a573-ef33d837d406", "play" : "all", "play_uuid" : "00163e21-72be-4886-1543-000000000002", "play_pattern" : "all", "task" : "Configure OVN for oVirt", "task_uuid" : "00163e21-72be-4886-1543-000000000042", "task_action" : "ansible.builtin.command", "task_args" : "", "task_path" : "/usr/share/ovirt-engine/ansible-runner-service-project/project/roles/ovirt-provider-ovn-driver/tasks/configure.yml:43", "role" : "ovirt-provider-ovn-driver", "host" : "ovirt1.domain.tld", "remote_addr" : "ovirt1.domain.tld", "res" : { "changed" : true, "stdout" : "", "stderr" : "Traceback (most recent call last):\n File \"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\", line 117, in get_network\n return networks[net_name]\nKeyError: 'ovirt1.domain.tld'\n\nDuring handling of the above exceptio n, another exception occurred:\n\nTraceback (most recent call last):\n File \"/usr/bin/vdsm-tool\", line 195, in main\n return tool_command[cmd][\"command\"](*args)\n File \"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\", line 63, in ov n_config\n ip_address = get_ip_addr(get_network(network_caps(), net_name))\n File \"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\", line 119, in get_network\n raise NetworkNotFoundError(net_name)\nvdsm.tool.ovn_config.NetworkNotFoundE rror: ovirt1.domain.tld", "rc" : 1, "cmd" : [ "vdsm-tool", "ovn-config", "10.36.191.11", "ovirt1.domain.tld" ], "start" : "2024-03-11 11:21:41.673444", "end" : "2024-03-11 11:21:43.909643", "delta" : "0:00:02.236199", "msg" : "non-zero return code", "invocation" : { "module_args" : { "_raw_params" : "vdsm-tool ovn-config 10.36.191.11 ovirt1.domain.tld\n", "_uses_shell" : false, "expand_argument_vars" : true, "stdin_add_newline" : true, "strip_empty_ends" : true, "argv" : null, "chdir" : null, "executable" : null, "creates" : null, "removes" : null, "stdin" : null } }, "stdout_lines" : [ ], "stderr_lines" : [ "Traceback (most recent call last):", " File \"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\", line 117, in get_network", " return networks[net_name]", "KeyError: 'ovirt1.domain.tld'", "", "During handling of the above exception, another exception occurred:", "", "Traceback (most recent call last):", " File \"/usr/bin/vdsm-tool\", line 195, in main", " return tool_command[cmd][\"command\"](*args)", " File \"/usr/lib/python3.9/site-packages/vdsm/tool/ovn _config.py\", line 63, in ovn_config", " ip_address = get_ip_addr(get_network(network_caps(), net_name))", " File \"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\", line 119, in get_network", " raise NetworkNotFoundError(net_name)", "v dsm.tool.ovn_config.NetworkNotFoundError: ovirt1.domain.tld" ], "_ansible_no_log" : false }, "start" : "2024-03-11T10:21:41.493826", "end" : "2024-03-11T10:21:43.925759", "duration" : 2.431933, "ignore_errors" : null, "event_loop" : null, "uuid" : "c43fec42-2838-4319-8f00-adaf24351341" } } Thank you Jirka

2 4

Re: [External] : The table in the database is too large
by ziyi Liu 19 Mar '24

19 Mar '24

Is the DB vacuum cleaning thorough? I tried that a long time ago and it didn't seem to clear much space. Is the data recorded in DB cyclic or automatically cleared periodically? Is it necessary to enable global maintenance for DB vacuum?

1 0

Are there in oVirt any limitations on network interfaces?
by John Mortensen 16 Mar '24

16 Mar '24

Hi, We are experiencing some network limitations on our virtual machines, we have done some initial testing to pinpoint the exact issue. Hardware: 2 x 25G NICs per physical machine 2 x 100G interlinks between datacenters iPerf test between two VMs in same host on same cluster and same datacenter reveals ~20GB/s (what is more or less expected) iPerf test between two VMs in differet host on same cluster and same datacenter reveals ~20GB/s (what is more or less expected) iPerf test between two VMs in differet host on different cluster and different datacenter reveals ~10GB/s (what is half or less than expected) There are no firewalls or other identified blockeing equipment between the datacenters. The only difference, as I see it, are traffic going across the 100G interlinks. Are there anything that needs to be tuned / setup in the NICs either on the VM or the host to be able to get higher speed between the datacenters? /John

3 3

Renaming a datacenter and a cluster
by John Mortensen 15 Mar '24

15 Mar '24

Hi, I was wondering if someone has had the same challenge as I have. Due to new naming constraints we need to rename a few things, namely the following: 1. The "cluster" 2. The "data center" Looking through the documentation I have been unable to find this described and I am uncertain what consequences a rename can have on the environment. /John

1 0