- Users - oVirt List Archives

manual migration
by eevans＠digitaldatatechs.com 04 Apr '20

04 Apr '20

FYI: My issue with the inability to migrate is solved. The issue was the ovirt-engine-ui-extensions-1.0.10-1.el7.noarch updated to 1.0.13 and it killed the ability to migrate. In order to downgrade I had to download the rpm, ovirt-engine-ui-extensions-1.0.10-1.el7.noarch.rpm and run a yum downgrade command “yum downgrade ovirt-engine-ui-extensions-1.0.10-1.el7.noarch.rpm”. It would not downgrade any other way. Once it downgraded, migration ability was back. Thanks all for the help and support. Eric Evans Digital Data Services LLC. 304.660.9080 From: Jayme <jaymef(a)gmail.com> Sent: Tuesday, February 25, 2020 9:29 AM To: users <users(a)ovirt.org> Subject: [ovirt-users] oVirt ansible backup improvements If anyone has been following along, I had previously shared a blog post and GitHub repo regarding my unofficial solution for backing up oVirt VMs using Ansible. Martin Necas reached out to me and we collaborated on some great improvements. Namely, it is now possible to run the playbook from any host without requiring direct access to storage (which I was previously using for export status verification). There were several other improvements and cleanups made as well. The changes have been merged in and the READMME updated, you can find the project here: https://github.com/silverorange/ovirt_ansible_backup Big thanks to Martin for helping out. Very much appreciated! - Jayme

2 1

Artwork: 4.4 GA banners
by Sandro Bonazzola 04 Apr '20

04 Apr '20

Hi, in preparation of oVirt 4.4 GA it would be nice to have some graphics we can use for launching oVirt 4.4 GA on social media and oVirt website. If you don't have coding skills but you have marketing or design skills this is a good opportunity to contribute back to the project. Looking forward to your designs! -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/>* <https://www.redhat.com/en/summit?sc_cid=7013a000002D2QxAAK>* *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

4 10

NFS permissions error on ISODomain file with correct permissions
by Shareef Jalloq 03 Apr '20

03 Apr '20

Hi, I asked this question in another thread but it seems to have been lost in the noise so I'm reposting with a more descriptive subject. I'm trying to start a Windows VM and use the virtio-win VFD floppy to get the drivers but the VM startup fails due to a permissions issue detailed below. The permissions look fine to me so why can't the VFD be read? Shareef. I found a permissions issue in the engine.log: 2020-03-25 21:28:41,662Z ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-14) [] EVENT_ID: VM_DOWN_ERROR(119), VM win-2019 is down with error. Exit message: internal error: qemu unexpectedly closed the monitor: 2020-03-25T21:28:40.324426Z qemu-kvm: -drive file=/rhev/data-center/mnt/nas-01.phoelex.com:_volume2_isostore/41cebb4b-c164-4956-8f44-6426170cd9f5/images/11111111-1111-1111-1111-111111111111/virtio-win_servers_amd64.vfd,format=raw,if=none,id=drive-ua-0b9c28b5-f75c-4575-ad85-b5b836f67d61,readonly=on: Could not open '/rhev/data-center/mnt/nas-01.phoelex.com:_volume2_isostore/41cebb4b-c164-4956-8f44-6426170cd9f5/images/11111111-1111-1111-1111-111111111111/virtio-win_servers_amd64.vfd': Permission denied. But when I look at that path on the node in question, every folder and the final file have the correct vdsm:kvm permissions: [root@ovirt-node-01 ~]# ll /rhev/data-center/mnt/nas-01.phoelex.com: _volume2_isostore/41cebb4b-c164-4956-8f44-6426170cd9f5/images/11111111-1111-1111-1111-111111111111/virtio-win_servers_amd64.vfd -rwxrwxrwx. 1 vdsm kvm 2949120 Mar 25 21:24 /rhev/data-center/mnt/nas-01.phoelex.com: _volume2_isostore/41cebb4b-c164-4956-8f44-6426170cd9f5/images/11111111-1111-1111-1111-111111111111/virtio-win_servers_amd64.vfd The files were uploaded to the ISO domain using: engine-iso-uploader --iso-domain=iso_storage upload virtio-win.iso virtio-win_servers_amd64.vfd

3 7

Re: Windows VirtIO drivers
by Shareef Jalloq 03 Apr '20

03 Apr '20

I can't seem to do anything. If I hit the Windows key and start typing, I get a black popup with no options. Win+R doesn't do anything aside from spit out a GSpice critical error in the terminal I'm running remote-viewer from. You spend a week trying to launch a VM and when you do, you can't do nowt. :-) On Thu, Apr 2, 2020 at 5:24 PM Robert Webb <rwebb(a)ropeguru.com> wrote: > I have yet to figure that one out. All of the VM's I built I had to go old > school with the tab key and arrow keys... > > Very annoying.. > > ________________________________________ > From: Shareef Jalloq <shareef(a)jalloq.co.uk> > Sent: Thursday, April 2, 2020 12:21 PM > To: eevans(a)digitaldatatechs.com > Cc: Robert Webb; users(a)ovirt.org > Subject: Re: [ovirt-users] Re: Windows VirtIO drivers > > Any idea what I need to do to get a working mouse in a Windows VM? I can > click on the SPICE viewer but the mouse pointer is fixed to the left hand > border. > > On Thu, Apr 2, 2020 at 4:38 PM Shareef Jalloq <shareef(a)jalloq.co.uk > <mailto:shareef@jalloq.co.uk>> wrote: > Sorry, I missed all these replies. Thanks for the help. > > I just noticed something funny in the Windows installer. When you get to > the point where it can't find any installation media, if you Load Driver, a > popup appears with a Browse and OK/Cancel options. I assumed that I should > be browsing to the floppy here but if you do that, you get an error that no > signed drivers can be found. Instead, you just have to hit OK when the > popup appears and that somehow finds the drivers. > > I'm assuming that I will need to install the network driver once the > installation has finished? > > On Wed, Mar 25, 2020 at 8:37 PM <eevans(a)digitaldatatechs.com<mailto: > eevans(a)digitaldatatechs.com>> wrote: > Ok. Personally, I like having an ISO repository, but I like the fact that's > it will be optional. > Thanks. > > Eric Evans > Digital Data Services LLC. > 304.660.9080 > > > -----Original Message----- > From: Robert Webb <rwebb(a)ropeguru.com<mailto:rwebb@ropeguru.com>> > Sent: Wednesday, March 25, 2020 4:26 PM > To: eevans(a)digitaldatatechs.com<mailto:eevans@digitaldatatechs.com>; > 'Shareef Jalloq' <shareef(a)jalloq.co.uk<mailto:shareef@jalloq.co.uk>>; > users(a)ovirt.org<mailto:users@ovirt.org> > Subject: Re: [ovirt-users] Re: Windows VirtIO drivers > > It does work that way. > > I found that out as I was testing oVirt and had not created a separate ISO > Domain. I believe it was Strahil who pointed me in the right direction. > > So if one does not have an ISO Domain, it is no longer required. Along with > the fact that ISO Domains are or in the process of being deprecated. > > ________________________________________ > From: eevans(a)digitaldatatechs.com<mailto:eevans@digitaldatatechs.com> < > eevans(a)digitaldatatechs.com<mailto:eevans@digitaldatatechs.com>> > Sent: Wednesday, March 25, 2020 3:13 PM > To: Robert Webb; 'Shareef Jalloq'; users(a)ovirt.org<mailto:users@ovirt.org> > Subject: RE: [ovirt-users] Re: Windows VirtIO drivers > > That may be true, but in the ISO domain, when you open virt viewer you can > change the cd very easily...maybe it works that way as well.. > > Eric Evans > Digital Data Services LLC. > 304.660.9080 > > > -----Original Message----- > From: Robert Webb <rwebb(a)ropeguru.com<mailto:rwebb@ropeguru.com>> > Sent: Wednesday, March 25, 2020 2:35 PM > To: eevans(a)digitaldatatechs.com<mailto:eevans@digitaldatatechs.com>; > 'Shareef Jalloq' <shareef(a)jalloq.co.uk<mailto:shareef@jalloq.co.uk>>; > users(a)ovirt.org<mailto:users@ovirt.org> > Subject: [ovirt-users] Re: Windows VirtIO drivers > > Don't think you have to use the ISO Domain any longer. > > You can upload to a Data Domain and when you highlight the VM in the > management GUI, select the three dots in the top left for extra options and > there is a change cd option. That option will allow for attaching an ISO > from a Data Domain. > > That is what I recall when I was using oVirt a month or so ago. > > ________________________________________ > From: eevans(a)digitaldatatechs.com<mailto:eevans@digitaldatatechs.com> < > eevans(a)digitaldatatechs.com<mailto:eevans@digitaldatatechs.com>> > Sent: Wednesday, March 25, 2020 2:28 PM > To: 'Shareef Jalloq'; users(a)ovirt.org<mailto:users@ovirt.org> > Subject: [ovirt-users] Re: Windows VirtIO drivers > > You have to copy the iso and vfd files to the ISO domain to make them > available to the vm's that need drivers. > > engine-iso-uploader options list > # engine-iso-uploader options upload file file file Documentation is found > here: https://www.ovirt.org/documentation/admin-guide/chap-Utilities.html > > Eric Evans > Digital Data Services LLC. > 304.660.9080 > [cid:image001.jpg@01D602B1.9FEA2EC0] > > From: Shareef Jalloq <shareef(a)jalloq.co.uk<mailto:shareef@jalloq.co.uk>> > Sent: Wednesday, March 25, 2020 1:51 PM > To: users(a)ovirt.org<mailto:users@ovirt.org> > Subject: [ovirt-users] Windows VirtIO drivers > > Hi, > > it seems the online documentation regarding the windows installation steps > is well out of date. Where is there any current documentation on where to > get the VirtIO drivers for a Windows installation? > > From a bit of Googling, it seems that I need to 'yum install virtio-win' on > the engine VM and then copy the relevant .iso/.vfd to the ISO domain. Is > that correct? > > Where is the documentation maintained and how do I open a bug on it? > > Thanks, Shareef. > > > > >

3 3

New Issue - Ovirt Status shows '?' or Down for all elements
by Mark Steele 03 Apr '20

03 Apr '20

Yesterday we had a storage crash that caused our hosted engine to stop and not auto-restart. We manually restarted it and this morning, all elements are showing a status of either question mark '?' or a red down chevron. We are running version oVirt Engine Version: 3.5.0.1-1.el6. We are chasing it down and see this in the log: 2020-04-01 10:15:53,060 WARN [org.ovirt.engine.core.vdsbroker.VdsManager] (DefaultQuartzScheduler_Worker-23) Failed to refresh VDS , vds = e98f8f1d-dd1d-47c4-b039-d6eaaf578317 : hv-06, VDS Network Error, continuing Any insight into what might be causing this or the fix would be appreciated. *** *Mark Steele*

4 10

Re: Windows VirtIO drivers
by eevans＠digitaldatatechs.com 02 Apr '20

02 Apr '20

Ok. Personally, I like having an ISO repository, but I like the fact that's it will be optional. Thanks. Eric Evans Digital Data Services LLC. 304.660.9080 -----Original Message----- From: Robert Webb <rwebb(a)ropeguru.com> Sent: Wednesday, March 25, 2020 4:26 PM To: eevans(a)digitaldatatechs.com; 'Shareef Jalloq' <shareef(a)jalloq.co.uk>; users(a)ovirt.org Subject: Re: [ovirt-users] Re: Windows VirtIO drivers It does work that way. I found that out as I was testing oVirt and had not created a separate ISO Domain. I believe it was Strahil who pointed me in the right direction. So if one does not have an ISO Domain, it is no longer required. Along with the fact that ISO Domains are or in the process of being deprecated. ________________________________________ From: eevans(a)digitaldatatechs.com <eevans(a)digitaldatatechs.com> Sent: Wednesday, March 25, 2020 3:13 PM To: Robert Webb; 'Shareef Jalloq'; users(a)ovirt.org Subject: RE: [ovirt-users] Re: Windows VirtIO drivers That may be true, but in the ISO domain, when you open virt viewer you can change the cd very easily...maybe it works that way as well.. Eric Evans Digital Data Services LLC. 304.660.9080 -----Original Message----- From: Robert Webb <rwebb(a)ropeguru.com> Sent: Wednesday, March 25, 2020 2:35 PM To: eevans(a)digitaldatatechs.com; 'Shareef Jalloq' <shareef(a)jalloq.co.uk>; users(a)ovirt.org Subject: [ovirt-users] Re: Windows VirtIO drivers Don't think you have to use the ISO Domain any longer. You can upload to a Data Domain and when you highlight the VM in the management GUI, select the three dots in the top left for extra options and there is a change cd option. That option will allow for attaching an ISO from a Data Domain. That is what I recall when I was using oVirt a month or so ago. ________________________________________ From: eevans(a)digitaldatatechs.com <eevans(a)digitaldatatechs.com> Sent: Wednesday, March 25, 2020 2:28 PM To: 'Shareef Jalloq'; users(a)ovirt.org Subject: [ovirt-users] Re: Windows VirtIO drivers You have to copy the iso and vfd files to the ISO domain to make them available to the vm's that need drivers. engine-iso-uploader options list # engine-iso-uploader options upload file file file Documentation is found here: https://www.ovirt.org/documentation/admin-guide/chap-Utilities.html Eric Evans Digital Data Services LLC. 304.660.9080 [cid:image001.jpg@01D602B1.9FEA2EC0] From: Shareef Jalloq <shareef(a)jalloq.co.uk> Sent: Wednesday, March 25, 2020 1:51 PM To: users(a)ovirt.org Subject: [ovirt-users] Windows VirtIO drivers Hi, it seems the online documentation regarding the windows installation steps is well out of date. Where is there any current documentation on where to get the VirtIO drivers for a Windows installation? From a bit of Googling, it seems that I need to 'yum install virtio-win' on the engine VM and then copy the relevant .iso/.vfd to the ISO domain. Is that correct? Where is the documentation maintained and how do I open a bug on it? Thanks, Shareef.

3 3

Hosted Engine stalled and unable to restart
by Mark Steele 02 Apr '20

02 Apr '20

Hello, We are on an older version (3.x - cannot be specific as I cannot get my ovirt hosted engine up). We experienced a storage failure earlier this evening - the hosted engine was originally installed with this storage domain although we have moved all VM's and disks off of it. The storage was restored and all the VM's are now running, but the ovirt engine is not pinging and is unreachable. I have attempted to locate it on my HV's using 'virsh list --all' but only one of those is taking my credentials - all the others fail to authenticate. Is there a way to locate what the credentials are on each HV since the default is not working? Additionally, is there any other way to locate the hosted engine and restart it directly from a HV? Thank you for your time and consideration. *** *Mark Steele*

5 8

KeyError: 'getgrnam(): name not found: hugetlbfs'
by Николаев Алексей 01 Apr '20

01 Apr '20

3 3

Engine status : unknown stale-data on single node
by Wood, Randall 01 Apr '20

01 Apr '20

I have a three node Ovirt cluster where one node has stale-data for the hosted engine, but the other two nodes do not: Output of `hosted-engine --vm-status` on a good node: ``` !! Cluster is in GLOBAL MAINTENANCE mode !! --== Host ovirt2.low.mdds.tcs-sec.com (id: 1) status ==-- conf_on_shared_storage : True Status up-to-date : True Hostname : ovirt2.low.mdds.tcs-sec.com Host ID : 1 Engine status : {"health": "good", "vm": "up", "detail": "Up"} Score : 3400 stopped : False Local maintenance : False crc32 : f91f57e4 local_conf_timestamp : 9915242 Host timestamp : 9915241 Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=9915241 (Fri Mar 27 14:38:14 2020) host-id=1 score=3400 vm_conf_refresh_time=9915242 (Fri Mar 27 14:38:14 2020) conf_on_shared_storage=True maintenance=False state=GlobalMaintenance stopped=False --== Host ovirt1.low.mdds.tcs-sec.com (id: 2) status ==-- conf_on_shared_storage : True Status up-to-date : True Hostname : ovirt1.low.mdds.tcs-sec.com Host ID : 2 Engine status : {"reason": "vm not running on this host", "health": "bad", "vm": "down", "detail": "unknown"} Score : 3400 stopped : False Local maintenance : False crc32 : 48f9c0fc local_conf_timestamp : 9218845 Host timestamp : 9218845 Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=9218845 (Fri Mar 27 14:38:22 2020) host-id=2 score=3400 vm_conf_refresh_time=9218845 (Fri Mar 27 14:38:22 2020) conf_on_shared_storage=True maintenance=False state=GlobalMaintenance stopped=False --== Host ovirt3.low.mdds.tcs-sec.com (id: 3) status ==-- conf_on_shared_storage : True Status up-to-date : False Hostname : ovirt3.low.mdds.tcs-sec.com Host ID : 3 Engine status : unknown stale-data Score : 3400 stopped : False Local maintenance : False crc32 : 620c8566 local_conf_timestamp : 1208310 Host timestamp : 1208310 Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=1208310 (Mon Dec 16 21:14:24 2019) host-id=3 score=3400 vm_conf_refresh_time=1208310 (Mon Dec 16 21:14:24 2019) conf_on_shared_storage=True maintenance=False state=GlobalMaintenance stopped=False !! Cluster is in GLOBAL MAINTENANCE mode !! ``` I tried the steps in https://access.redhat.com/discussions/3511881, but `hosted-engine --vm-status` on the node with stale data shows: ``` The hosted engine configuration has not been retrieved from shared storage. Please ensure that ovirt-ha-agent is running and the storage server is reachable. ``` One the stale node, ovirt-ha-agent and ovirt-ha-broker are continually restarting. Since it seems the agent depends on the broker, the broker logs includes this snippet, repeating roughly every 3 seconds: ``` MainThread::INFO::2020-03-27 15:01:06,584::broker::47::ovirt_hosted_engine_ha.broker.broker.Broker::(run) ovirt-hosted-engine-ha broker 2.3.6 started MainThread::INFO::2020-03-27 15:01:06,584::monitor::40::ovirt_hosted_engine_ha.broker.monitor.Monitor::(_discover_submonitors) Searching for submonitors in /usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/broker/submonitors MainThread::INFO::2020-03-27 15:01:06,585::monitor::49::ovirt_hosted_engine_ha.broker.monitor.Monitor::(_discover_submonitors) Loaded submonitor engine-health MainThread::INFO::2020-03-27 15:01:06,585::monitor::49::ovirt_hosted_engine_ha.broker.monitor.Monitor::(_discover_submonitors) Loaded submonitor storage-domain MainThread::INFO::2020-03-27 15:01:06,585::monitor::49::ovirt_hosted_engine_ha.broker.monitor.Monitor::(_discover_submonitors) Loaded submonitor network MainThread::INFO::2020-03-27 15:01:06,587::monitor::49::ovirt_hosted_engine_ha.broker.monitor.Monitor::(_discover_submonitors) Loaded submonitor cpu-load-no-engine MainThread::INFO::2020-03-27 15:01:06,587::monitor::49::ovirt_hosted_engine_ha.broker.monitor.Monitor::(_discover_submonitors) Loaded submonitor mem-free MainThread::INFO::2020-03-27 15:01:06,587::monitor::49::ovirt_hosted_engine_ha.broker.monitor.Monitor::(_discover_submonitors) Loaded submonitor network MainThread::INFO::2020-03-27 15:01:06,588::monitor::49::ovirt_hosted_engine_ha.broker.monitor.Monitor::(_discover_submonitors) Loaded submonitor mgmt-bridge MainThread::INFO::2020-03-27 15:01:06,588::monitor::49::ovirt_hosted_engine_ha.broker.monitor.Monitor::(_discover_submonitors) Loaded submonitor storage-domain MainThread::INFO::2020-03-27 15:01:06,589::monitor::49::ovirt_hosted_engine_ha.broker.monitor.Monitor::(_discover_submonitors) Loaded submonitor cpu-load-no-engine MainThread::INFO::2020-03-27 15:01:06,589::monitor::49::ovirt_hosted_engine_ha.broker.monitor.Monitor::(_discover_submonitors) Loaded submonitor engine-health MainThread::INFO::2020-03-27 15:01:06,589::monitor::49::ovirt_hosted_engine_ha.broker.monitor.Monitor::(_discover_submonitors) Loaded submonitor mgmt-bridge MainThread::INFO::2020-03-27 15:01:06,589::monitor::49::ovirt_hosted_engine_ha.broker.monitor.Monitor::(_discover_submonitors) Loaded submonitor cpu-load MainThread::INFO::2020-03-27 15:01:06,590::monitor::49::ovirt_hosted_engine_ha.broker.monitor.Monitor::(_discover_submonitors) Loaded submonitor cpu-load MainThread::INFO::2020-03-27 15:01:06,590::monitor::49::ovirt_hosted_engine_ha.broker.monitor.Monitor::(_discover_submonitors) Loaded submonitor mem-free MainThread::INFO::2020-03-27 15:01:06,590::monitor::50::ovirt_hosted_engine_ha.broker.monitor.Monitor::(_discover_submonitors) Finished loading submonitors MainThread::INFO::2020-03-27 15:01:06,678::storage_backends::373::ovirt_hosted_engine_ha.lib.storage_backends::(connect) Connecting the storage MainThread::INFO::2020-03-27 15:01:06,678::storage_server::349::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server MainThread::INFO::2020-03-27 15:01:06,717::storage_server::356::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server MainThread::INFO::2020-03-27 15:01:06,732::storage_server::413::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Refreshing the storage domain MainThread::WARNING::2020-03-27 15:01:08,940::storage_broker::97::ovirt_hosted_engine_ha.broker.storage_broker.StorageBroker::(__init__) Can't connect vdsm storage: [Errno 5] Input/output error: '/rhev/data-center/mnt/glusterSD/ovirt2:_engine/182a4a94-743f-4941-89c1-dc2008ae1cf5/ha_agent/hosted-engine.lockspace' ``` I restarted the stale node yesterday, but it still shows stale data from December of last year. What is the recommended way for me to try to recover from this? (This came to my attention when warnings concerning space on the /var/log partition began popping up.) Thank you, Randall

3 4

Re: Local network
by Tommaso - Shellrent 01 Apr '20

01 Apr '20

This is what i've got: *ovs-vsctl show* 03a038d4-e81c-45e0-94d1-6f18d6504f1f Bridge br-int fail_mode: secure Port "ovn-765f43-0" Interface "ovn-765f43-0" type: geneve options: {csum="true", key=flow, remote_ip="xxx.169.yy.6"} Port br-int Interface br-int type: internal Port "vnet1" Interface "vnet1" Port "ovn-b33f6e-0" Interface "ovn-b33f6e-0" type: geneve options: {csum="true", key=flow, remote_ip="xxx.169.yy.2"} Port "vnet3" Interface "vnet3" Port "ovn-8678d9-0" Interface "ovn-8678d9-0" type: geneve options: {csum="true", key=flow, remote_ip="xxx.169.yy.8"} Port "ovn-fdd090-0" Interface "ovn-fdd090-0" type: geneve options: {csum="true", key=flow, remote_ip="xxx.169.yy.4"} ovs_version: "2.11.0" I suppose that the vnic are: Port "vnet1" Interface "vnet1" Port "vnet3" Interface "vnet3" on the engine: *ovn-nbctl show* switch a1f30e99-3ab7-46a4-925d-287871905cab (ovirt-local_network_definitiva-d58aea97-bb20-4e8f-bcc3-5277754846bb) port b82f3479-b459-4c26-aff0-053d15c74ddd addresses: ["56:6f:96:b1:00:4c"] port 52f09a28-1645-45ff-9b84-1e53a81bb399 addresses: ["56:6f:96:b1:00:4b"] *ovn-sbctl show* Chassis "ab5bdfdd-8df4-4e9b-9ce9-565cfd513a4d" hostname: "pvt-41f18-002.serverlet.com" Encap geneve ip: "aaa.31.bbb.224" options: {csum="true"} Port_Binding "b82f3479-b459-4c26-aff0-053d15c74ddd" Port_Binding "52f09a28-1645-45ff-9b84-1e53a81bb399" Il 31/03/20 13:39, Staniforth, Paul ha scritto: > The engine runs the controller so ovn-sbctl won't work, on the hosts, > use ovs-vsctl show > > Paul S. > ------------------------------------------------------------------------ > *From:* Tommaso - Shellrent <tommaso(a)shellrent.com> > *Sent:* 31 March 2020 12:13 > *To:* Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk>; > users(a)ovirt.org <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Local network > > *Caution External Mail:* Do not click any links or open any > attachments unless you trust the sender and know that the content is safe. > > Hi. > > on engine all seems fine. > > on host the command "ovn-sbctl show" is stuck, and with a strace a se > the following error: > > > connect(5, {sa_family=AF_LOCAL, > sun_path="/var/run/openvswitch/ovnsb_db.sock"}, 37) = -1 ENOENT (No > such file or directory) > > > > > > > Il 31/03/20 11:18, Staniforth, Paul ha scritto: >> >> .Hello Tommaso, >> on your oVirt engine host run >> check the north bridge controller >> ovn-nbctl show >> this should show a software switch for each ovn logical network witch >> any ports that are active( in your case you should have 2) >> >> check the south bridge controller >> ovn-sbctl show >> this should show the software switch on each host with a geneve tunnel. >> >> on each host run >> ovs-vsctl show >> this should show the virtual switch with a geneve tunnel to each >> other host and a port for any active vnics >> >> Regards, >> Paul S. >> >> ------------------------------------------------------------------------ >> *From:* Tommaso - Shellrent <tommaso(a)shellrent.com> >> <mailto:tommaso@shellrent.com> >> *Sent:* 31 March 2020 09:27 >> *To:* users(a)ovirt.org <mailto:users@ovirt.org> <users(a)ovirt.org> >> <mailto:users@ovirt.org> >> *Subject:* [ovirt-users] Local network >> >> *Caution External Mail:* Do not click any links or open any >> attachments unless you trust the sender and know that the content is >> safe. >> >> Hi to all. >> >> I'm trying to connect two vm, on the same "local storage" host, >> with an internal isolated network. >> >> My setup; >> >> VM A: >> >> * eth0 with an external ip >> * eth1, with 1922.168.1.1/24 >> >> VM B >> >> * eth0 with an external ip >> * eth1, with 1922.168.1.2/24 >> >> the eth1 interfaces are connetter by a network created on external >> provider ovirt-network-ovn , whithout a subnet defined. >> >> Now, the external ip works fine, but the two vm cannot connect >> through the local network >> >> ping: ko >> arping: ko >> >> >> any idea to what to check? >> >> >> Regards >> >> -- >> -- >> Shellrent - Il primo hosting italiano Security First >> >> *Tommaso De Marchi* >> /COO - Chief Operating Officer/ >> Shellrent Srl >> Via dell'Edilizia, 19 - 36100 Vicenza >> Tel. 0444321155 <tel:+390444321155> | Fax 04441492177 >> >> To view the terms under which this email is distributed, please go to:- >> http://leedsbeckett.ac.uk/disclaimer/email/ > -- > -- > Shellrent - Il primo hosting italiano Security First > > *Tommaso De Marchi* > /COO - Chief Operating Officer/ > Shellrent Srl > Via dell'Edilizia, 19 - 36100 Vicenza > Tel. 0444321155 <tel:+390444321155> | Fax 04441492177 > > To view the terms under which this email is distributed, please go to:- > http://leedsbeckett.ac.uk/disclaimer/email/ -- -- Shellrent - Il primo hosting italiano Security First *Tommaso De Marchi* /COO - Chief Operating Officer/ Shellrent Srl Via dell'Edilizia, 19 - 36100 Vicenza Tel. 0444321155 <tel:+390444321155> | Fax 04441492177

2 2