- Users - oVirt List Archives

Re: Windows VirtIO drivers
by eevans＠digitaldatatechs.com 25 Mar '20

25 Mar '20

That may be true, but in the ISO domain, when you open virt viewer you can change the cd very easily...maybe it works that way as well.. Eric Evans Digital Data Services LLC. 304.660.9080 -----Original Message----- From: Robert Webb <rwebb(a)ropeguru.com> Sent: Wednesday, March 25, 2020 2:35 PM To: eevans(a)digitaldatatechs.com; 'Shareef Jalloq' <shareef(a)jalloq.co.uk>; users(a)ovirt.org Subject: [ovirt-users] Re: Windows VirtIO drivers Don't think you have to use the ISO Domain any longer. You can upload to a Data Domain and when you highlight the VM in the management GUI, select the three dots in the top left for extra options and there is a change cd option. That option will allow for attaching an ISO from a Data Domain. That is what I recall when I was using oVirt a month or so ago. ________________________________________ From: eevans(a)digitaldatatechs.com <eevans(a)digitaldatatechs.com> Sent: Wednesday, March 25, 2020 2:28 PM To: 'Shareef Jalloq'; users(a)ovirt.org Subject: [ovirt-users] Re: Windows VirtIO drivers You have to copy the iso and vfd files to the ISO domain to make them available to the vm's that need drivers. engine-iso-uploader options list # engine-iso-uploader options upload file file file Documentation is found here: https://www.ovirt.org/documentation/admin-guide/chap-Utilities.html Eric Evans Digital Data Services LLC. 304.660.9080 [cid:image001.jpg@01D602B1.9FEA2EC0] From: Shareef Jalloq <shareef(a)jalloq.co.uk> Sent: Wednesday, March 25, 2020 1:51 PM To: users(a)ovirt.org Subject: [ovirt-users] Windows VirtIO drivers Hi, it seems the online documentation regarding the windows installation steps is well out of date. Where is there any current documentation on where to get the VirtIO drivers for a Windows installation? From a bit of Googling, it seems that I need to 'yum install virtio-win' on the engine VM and then copy the relevant .iso/.vfd to the ISO domain. Is that correct? Where is the documentation maintained and how do I open a bug on it? Thanks, Shareef.

2 1

Re: Windows VirtIO drivers
by eevans＠digitaldatatechs.com 25 Mar '20

25 Mar '20

The iso's and vfd's are in /usr/share/virtio-win Eric Evans Digital Data Services LLC. 304.660.9080 -----Original Message----- From: Robert Webb <rwebb(a)ropeguru.com> Sent: Wednesday, March 25, 2020 2:35 PM To: eevans(a)digitaldatatechs.com; 'Shareef Jalloq' <shareef(a)jalloq.co.uk>; users(a)ovirt.org Subject: [ovirt-users] Re: Windows VirtIO drivers Don't think you have to use the ISO Domain any longer. You can upload to a Data Domain and when you highlight the VM in the management GUI, select the three dots in the top left for extra options and there is a change cd option. That option will allow for attaching an ISO from a Data Domain. That is what I recall when I was using oVirt a month or so ago. ________________________________________ From: eevans(a)digitaldatatechs.com <eevans(a)digitaldatatechs.com> Sent: Wednesday, March 25, 2020 2:28 PM To: 'Shareef Jalloq'; users(a)ovirt.org Subject: [ovirt-users] Re: Windows VirtIO drivers You have to copy the iso and vfd files to the ISO domain to make them available to the vm's that need drivers. engine-iso-uploader options list # engine-iso-uploader options upload file file file Documentation is found here: https://www.ovirt.org/documentation/admin-guide/chap-Utilities.html Eric Evans Digital Data Services LLC. 304.660.9080 [cid:image001.jpg@01D602B1.9FEA2EC0] From: Shareef Jalloq <shareef(a)jalloq.co.uk> Sent: Wednesday, March 25, 2020 1:51 PM To: users(a)ovirt.org Subject: [ovirt-users] Windows VirtIO drivers Hi, it seems the online documentation regarding the windows installation steps is well out of date. Where is there any current documentation on where to get the VirtIO drivers for a Windows installation? From a bit of Googling, it seems that I need to 'yum install virtio-win' on the engine VM and then copy the relevant .iso/.vfd to the ISO domain. Is that correct? Where is the documentation maintained and how do I open a bug on it? Thanks, Shareef.

1 0

Windows VirtIO drivers
by Shareef Jalloq 25 Mar '20

25 Mar '20

Hi, it seems the online documentation regarding the windows installation steps is well out of date. Where is there any current documentation on where to get the VirtIO drivers for a Windows installation? From a bit of Googling, it seems that I need to 'yum install virtio-win' on the engine VM and then copy the relevant .iso/.vfd to the ISO domain. Is that correct? Where is the documentation maintained and how do I open a bug on it? Thanks, Shareef.

3 2

oVirt 4.4.0 Alpha release refresh is now available for testing
by Sandro Bonazzola 25 Mar '20

25 Mar '20

oVirt 4.4.0 Alpha release refresh is now available for testing The oVirt Project is excited to announce the availability of the alpha release refresh of oVirt 4.4.0 for testing, as of March 6th, 2020 This release unleashes an altogether more powerful and flexible open source virtualization solution that encompasses hundreds of individual changes and a wide range of enhancements across the engine, storage, network, user interface, and analytics on top of oVirt 4.3. Important notes before you try it Please note this is an Alpha release. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not to be used in production, and it is not feature complete. In particular, please note that upgrades from 4.3 and future upgrades from this alpha to the final 4.4 release from this version are not supported. Some of the features included in oVirt 4.4.0 Alpha require content that will be available in CentOS Linux 8.2 which are currently included in Red Hat Enterprise Linux 8.2 beta. If you want to have a better experience you can test oVirt 4.4.0 Alpha on Red Hat Enterprise Linux 8.2 beta. Known Issues - After installation open the Default cluster and hit “Save”, for any other new Cluster using CPU autodetection the dialog needs to be explicitly saved after the detection happens, after first host is added. (bug https://bugzilla.redhat.com/1770697) Installation instructions For the engine: either use appliance or: - Install CentOS Linux 8 minimal from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - dnf module enable -y javapackages-tools pki-deps 389-ds - dnf install ovirt-engine - engine-setup For the nodes: Either use oVirt Node ISO or: - Install CentOS Linux 8 from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… ; select minimal installation - dnf config-manager --set-enabled PowerTools - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - Attach the host to engine and let it be deployed. What’s new in oVirt 4.4.0 Alpha? - Hypervisors based on CentOS Linux 8 (rebuilt from award winning RHEL8), for both oVirt Node and standalone CentOS Linux hosts - Easier network management and configuration flexibility with NetworkManager - VMs based on a more modern Q35 chipset with legacy seabios and UEFI firmware - Support for direct passthrough of local host disks to VMs - Live migration improvements for High Performance guests. - New Windows Guest tools installer based on WiX framework now moved to VirtioWin project - Dropped support for cluster level prior to 4.2 - Dropped SDK3 support - 4K disks support - Exporting a VM to a data domain - Editing of floating disks - Integrating ansible-runner into engine, which allows a more detailed monitoring of playbooks executed from engine - Adding/reinstalling hosts are now completely based on Ansible - The OpenStack Neutron Agent cannot be configured by oVirt anymore, it should be configured by TripleO instead This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.1 or newer * CentOS Linux (or similar) 8.1 or newer This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.1 or newer (8.2 beta recommended) * CentOS Linux (or similar) 8.1 or newer * oVirt Node 4.4 based on CentOS Linux 8.1 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. If you manage more than one oVirt instance, OKD or RDO we also recommend to try ManageIQ <http://manageiq.org/>. In such a case, please be sure to take the qc2 image and not the ova image. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.0 release highlights: http://www.ovirt.org/release/4.4.0/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.0/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

12 19

Migrate Hosted Engine to new Storage
by Anton Louw 25 Mar '20

25 Mar '20

Hi Everybody, Does anybody know when we will most likely be able to do a live storage migration of the Hosted Engine? I've been battling with the backup and restore way for a couple of days now already, and it is starting to feel like a fruitless exercise. Thanks Anton Louw Cloud Engineer: Storage and Virtualization ______________________________________ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.louw(a)voxtelecom.co.za www.vox.co.za

1 0

upload image using python api
by David David 25 Mar '20

25 Mar '20

hi can't upload disk image with that script: https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/upload_d… this error message is appeared when i trying to upload image: # python upload_disk.py --engine-url https://alias-e.localdomain --username admin@internal --disk-format raw --sd-name iscsi-test-7 -c ca.pem /home/linux1.raw Checking image... Image format: raw Disk format: raw Disk content type: data Disk provisioned size: 42949672960 Disk initial size: 42949672960 Disk name: linux1.raw Connecting... Password: Creating disk... Creating transfer session... Uploading image... Traceback (most recent call last): File "upload_disk.py", line 288, in <module> with ui.ProgressBar() as pb: TypeError: __init__() takes at least 2 arguments (1 given) software using: ovirt-engine 4.3.8.2-1 python-ovirt-engine-sdk4-4.3.2-2

2 2

does SPM still exist?
by yam yam 25 Mar '20

25 Mar '20

Hello, I heard some say SPM disappeared since 3.6. nevertheless, SPM still exists in oVirt admin portal or even in RHV's manual. So, I am wondering whether SPM still exists now. And could I know how to get more detailed information for oVirt internals?? is the code review the best way?

2 2

Re: safe to have perf and dstat on ovirt node?
by Gianluca Cecchi 24 Mar '20

24 Mar '20

On Mon, Mar 23, 2020 at 11:56 PM Shirly Radco <sradco(a)redhat.com> wrote: > Hi, > > I can't answer about perf, But would Collectd be useful for you? > It is already installed on the hosts and engine. > > Best, > Shirly > > Thanks for your answer Shirly, do you mean implementing Metrics Store? Gianluca

1 0

connect from public to private network
by nikkognt＠gmail.com 24 Mar '20

24 Mar '20

Good morning, I have an Ovirt infrastructure and its configured in private network. How can I connect from public network to web portal and the virtual machines via spice client? My infrastructure is configured by 1 engine and 2 hosts. How can I do? Suggestions? Thanks! Best regards Nikkognt

1 1

Data Center, Cluster and Storage Domains show as "Down" after backup and restore
by anton.louw＠voxtelecom.co.za 24 Mar '20

24 Mar '20

Hi Everybody, So I did a full backup of our HE, redeployed and restored. After the restore, I ran engine-setup on the newly deployed HE. I can access the the environment as per normal, the only issue is that everything still shows as "down", this includes hosts and VMs? Is there something I need to do in order to get everything to display as "Up" again? Thanks

1 0