- Users - oVirt List Archives

Re: Add LDAP user : ERROR: null value in column "external_id" violates not-null constraint
by Lucas Lamy 20 Feb '20

20 Feb '20

Anybody ?

2 1

Unsynced entries do not self-heal during upgrade from oVirt 4.2 -> 4.3
by Goorkate, B.J. 20 Feb '20

20 Feb '20

Hi all, I'm in the process of upgrading oVirt-nodes from 4.2 to 4.3. After upgrading the first of 3 oVirt/gluster nodes, there are between 600-1200 unsynced entries for a week now on 1 upgraded node and one not-yet-upgraded node. The third node (also not-yet-upgraded) says it's OK (no unsynced entries). The cluster doesn't seem to be very busy, but somehow self-heal doesn't complete. Is this because of different gluster versions across the nodes and will it resolve as soon as I upgraded all nodes? Since it's our production cluster, I don't want to take any risk... Does anybody recognise this problem? Of course I can provide more information if necessary. Any hints on troubleshooting the unsynced entries are more than welcome! Thanks in advance! Regards, Bertjan ------------------------------------------------------------------------------ De informatie opgenomen in dit bericht kan vertrouwelijk zijn en is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht onterecht ontvangt, wordt u verzocht de inhoud niet te gebruiken en de afzender direct te informeren door het bericht te retourneren. Het Universitair Medisch Centrum Utrecht is een publiekrechtelijke rechtspersoon in de zin van de W.H.W. (Wet Hoger Onderwijs en Wetenschappelijk Onderzoek) en staat geregistreerd bij de Kamer van Koophandel voor Midden-Nederland onder nr. 30244197. Denk s.v.p aan het milieu voor u deze e-mail afdrukt. ------------------------------------------------------------------------------ This message may contain confidential information and is intended exclusively for the addressee. If you receive this message unintentionally, please do not use the contents but notify the sender immediately by return e-mail. University Medical Center Utrecht is a legal person by public law and is registered at the Chamber of Commerce for Midden-Nederland under no. 30244197. Please consider the environment before printing this e-mail.

3 12

Re: Engine installation failed at - get local vm ip
by shawly 20 Feb '20

20 Feb '20

Still have this problem, log doesn't say anything but that it failed after 90 tries, no reason in the log. Using VMWare Workstation 14, guest is running oVirt Node 4.3.8.

2 1

Can't install virtio-win with EL7.7/Ovirt-4.3.8 -- rpm error
by Derek Atkins 19 Feb '20

19 Feb '20

Hi, I was trying to install the virtio-win package, but it gives an error: ERROR You need to update rpm to handle: rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by virtio-win-0.1.173-6.noarch Is this a known problem with current 4.3.x and EL7.7? -derek -- Derek Atkins 617-623-3745 derek(a)ihtfp.com www.ihtfp.com Computer and Internet Security Consultant

6 7

Re: populating the ISO domain
by Gianluca Cecchi 19 Feb '20

19 Feb '20

On Wed, Feb 19, 2020 at 4:37 PM Robert Webb <rwebb(a)ropeguru.com> wrote: > No. > > I am using the Spice viewer and my Data domain is on NFS. When I open the > "Change CD" option in the viewer, I only see ISO's from the ISO Domain. > > I haven't found any other way to actually mount an ISO to a VM other then > the viewer which kinda sucks. I am used to other environments where I could > just mount an ISO to a cdrom in the VM config and it shows up in the OS. > > If you can shutdown the VM, you could try to shutdown it and then choose the arrow near "run" and select "run once". There you can attach an iso: do you see your data domain isos there? In my case I have isos on block based data domains: I cannot dynamically change cd due to the bug I reported, but if I start a VM with "run once" I can see the ISOs on data domain available and usable (eg to install OS) See also the "Explanation of Settings in the Run Once Window" section here: https://www.ovirt.org/documentation/vmm-guide/appe-Reference_Settings_in_Ad… Gianluca

2 1

Re: populating the ISO domain
by Vinícius Ferrão 19 Feb '20

19 Feb '20

Hi. ISO domains were deprecated. Now you should use a Data Domain instead and fill with the ISOs. If you still using ISO Domain, like me, I only scp the ISOs directly to the storage. You don’t need to use the ISO uploader script. I never made it work anyway LOL. Sent from my iPhone > On 19 Feb 2020, at 04:33, "eevans(a)digitaldatatechs.com" <eevans(a)digitaldatatechs.com> wrote: >

3 2

Re: populating the ISO domain
by Gianluca Cecchi 19 Feb '20

19 Feb '20

On Wed, Feb 19, 2020 at 4:11 PM Robert Webb <rwebb(a)ropeguru.com> wrote: > So I had also read that ISO Domains have been deprecated but ran into an > issue when using console access. It seems that the client does not see any > ISO files from the Data domains when using the "Change CD" option and that > is the only option that I have found to be able to use when I need to mount > an ISO file to a VM. > > Am I missing something? If not, how can we deprecate the ISO Domain? > > In case of data domains on block based storage (iSCSI and FC) there is this outstanding bugzilla not fixed yet: https://bugzilla.redhat.com/show_bug.cgi?id=1589763 I don't know if it is your use case. Gianluca

3 2

Re: populating the ISO domain
by Strahil Nikolov 19 Feb '20

19 Feb '20

On February 19, 2020 5:37:28 PM GMT+02:00, Robert Webb <rwebb(a)ropeguru.com> wrote: >No. > >I am using the Spice viewer and my Data domain is on NFS. When I open >the "Change CD" option in the viewer, I only see ISO's from the ISO >Domain. > >I haven't found any other way to actually mount an ISO to a VM other >then the viewer which kinda sucks. I am used to other environments >where I could just mount an ISO to a cdrom in the VM config and it >shows up in the OS. > >________________________________________ >From: Gianluca Cecchi <gianluca.cecchi(a)gmail.com> >Sent: Wednesday, February 19, 2020 10:34 AM >To: Robert Webb >Cc: Vinícius Ferrão; eevans(a)digitaldatatechs.com; users(a)ovirt.org >Subject: Re: [ovirt-users] Re: populating the ISO domain > >On Wed, Feb 19, 2020 at 4:11 PM Robert Webb ><rwebb(a)ropeguru.com<mailto:rwebb@ropeguru.com>> wrote: >So I had also read that ISO Domains have been deprecated but ran into >an issue when using console access. It seems that the client does not >see any ISO files from the Data domains when using the "Change CD" >option and that is the only option that I have found to be able to use >when I need to mount an ISO file to a VM. > >Am I missing something? If not, how can we deprecate the ISO Domain? > > >In case of data domains on block based storage (iSCSI and FC) there is >this outstanding bugzilla not fixed yet: >https://bugzilla.redhat.com/show_bug.cgi?id=1589763 > >I don't know if it is your use case. > >Gianluca >_______________________________________________ >Users mailing list -- users(a)ovirt.org >To unsubscribe send an email to users-leave(a)ovirt.org >Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >oVirt Code of Conduct: >https://www.ovirt.org/community/about/community-guidelines/ >List Archives: >https://lists.ovirt.org/archives/list/users@ovirt.org/message/FYMZYKUUGQZHQ… What about going in Admin portal, select the VM, and then click the 3 dots button ? There should be a 'Eject' and all your ISOs (I have already migrated to data domain). Best Regards, Strahil Nikolov

2 1

Re: hosted-engine --deploy --restore-from-file fails with error "Domain format is different from master storage domain format"
by dev＠djagoo.io 19 Feb '20

19 Feb '20

Hi Shani, on the productive cluster (Default) the compat level is 4.3 and on the cluster it's 4.3 too so I can't raise the level to update the format to V5. I added some screenshots. Regards Marcel On Tuesday, February 18, 2020 10:51:29 AM CET you wrote: > Hi Marcel, > Can you make sure the DC and Cluster formats are V5? > Maybe try to "update" them by editing the cluster first, and selecting the > newest Compatibility Version available. > Then, do the same for the DC. > > If all versions/formats are of V5, and it still occurs, can you please > share some screenshots so I'll have a look? > > > *Regards,* > > *Shani Leviim* > > On Mon, Feb 17, 2020 at 5:08 PM djagoo <dev(a)djagoo.io> wrote: > > Hi Shani, > > > > I just tried it. > > > > I created a new DC and cluster, added a temporary host to this cluster > > which served as SPM. The new DC showed up as V5. > > Then I activated maintenance on one of the V4 SDs and detached it from my > > production domain. After I attached it to the V5 dummy domain it was > > updated to V5 format as you predicted. I detached it again but could not > > reattach it to the production domain "There are no compatible Storage > > Domains to attach to this Data Center". So this seems not to be the > > solution :( > > > > Do you have another idea or am I doing something wrong? > > > > Regards, > > > > Marcel > > _______________________________________________ > > Users mailing list -- users(a)ovirt.org > > To unsubscribe send an email to users-leave(a)ovirt.org > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > > oVirt Code of Conduct: > > https://www.ovirt.org/community/about/community-guidelines/ > > List Archives: > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/XV6WQNGS3LQU > > 3GWMR62MNZ5ENQA4BJQZ/

3 4

new glance server
by Tommaso - Shellrent 19 Feb '20

19 Feb '20

Hi to all. I'm try to create a glance server to store our images, but I have some problem. With the guide i can correcty configure a "train" minimun stack with keyone and glance, but it only support auth api v3. oVirt for glance only support v2. The newest version of keystone that have the v2 api, is Pike, but it cannot be insalled on centos today. Where a can fine an old repo with pike packages? or how can i make a glance installation that doesn't require autentication? Regards, Tommaso. -- Shellrent Logo *Tommaso De Marchi* COO Chief Operating Officer - Shellrent S.r.l. Tel. 0444321155 <tel:+390444321155> | Fax 04441492177 Via dell'Edilizia, 19 - 36100 Vicenza

2 2