- Users - oVirt List Archives

Re: Issue deploying self hosted engine on new install
by thomas＠hoberg.net 02 Jan '20

02 Jan '20

Yes, I have had the same and posted about it here somewhere: I believe it's an incompatible Ansible change. Here is the critical part if the message below: "The 'ovirt_host_facts' module has been renamed to 'ovirt_host_info', and the renamed one no longer returns ansible_facts" and that change was made in the transition of Ansible 2.8* to 2.9, from what I gathered. I guess I should just make it a bug report if you find the same message in your logs. [ ERROR ] fatal: [localhost]: FAILED! => {"ansible_facts": {"ovirt_hosts": [{"address": "xdrd1022s.priv.atos.fr", "affinity_labels": [], "auto_numa_status": "unknown", "certificate": {"organization": "priv.atos.fr", "subject": "O=priv.atos.fr,CN=xdrd1022s.priv.atos.fr"}, "cluster": {"href": "/ovirt-engine/api/clusters/c407e776-1c3c-11ea-aeed-00163e56112a", "id": "c407e776-1c3c-11ea-aeed-00163e56112a"}, "comment": "", "cpu": {"speed": 0.0, "topology": {}}, "device_passthrough": {"enabled": false}, "devices": [], "external_network_provider_configurations": [], "external_status": "ok", "hardware_information": {"supported_rng_sources": []}, "hooks": [], "href": "/ovirt-engine/api/hosts/a5bb73a1-f923-4568-8dda-434e07f7e243", "id": "a5bb73a1-f923-4568-8dda-434e07f7e243", "katello_errata": [], "kdump_status": "unknown", "ksm": {"enabled": false}, "max_scheduling_memory": 0, "memory": 0, "name": "xdrd1022s.priv.atos.fr", "network_attachments": [], "nics": [], "numa_nodes": [], "numa_supporte d": false, "os": {"custom_kernel_cmdline": ""}, "permissions": [], "port": 54321, "power_management": {"automatic_pm_enabled": true, "enabled": false, "kdump_detection": true, "pm_proxies": []}, "protocol": "stomp", "se_linux": {}, "spm": {"priority": 5, "status": "none"}, "ssh": {"fingerprint": "SHA256:wqpBWq9Kb9+Nb3Jwtw61QJzo+R4gGOP2dLubssU5EPs", "port": 22}, "statistics": [], "status": "install_failed", "storage_connection_extensions": [], "summary": {"total": 0}, "tags": [], "transparent_huge_pages": {"enabled": false}, "type": "rhel", "unmanaged_networks": [], "update_available": false, "vgpu_placement": "consolidated"}]}, "attempts": 120, "changed": false, "deprecations": [{"msg": "The 'ovirt_host_facts' module has been renamed to 'ovirt_host_info', and the renamed one no longer returns ansible_facts", "version": "2.13"}]}

4 5

What does this error mean?
by zhouhao＠vip.friendtimes.net 01 Jan '20

01 Jan '20

event ID:10802 VDSM 192.168.10.56 command Get Host Statistics failed: Internal JSON-RPC error: {'reason': '<Fault 1: "<type \'exceptions.AttributeError\'>:\'NoneType\' object has no attribute \'statistics\'">'}

1 0

Re: Node not starting | blk_cloned_rq_check_limits: over max size limit
by Strahil 31 Dec '19

31 Dec '19

By the way, why do you use multipath for local storage like this EVO nvme ? Happy New Year ! Best Regards, Strahil NikolovOn Dec 31, 2019 21:51, Strahil <hunter86_bg(a)yahoo.com> wrote: > > You can check https://access.redhat.com/solutions/2437991 & https://access.redhat.com/solutions/3014361 > > You have 2 options: > 1. Set a udev rule like this one (replace NETAPP with your storage) > ACTION!="add|change", GOTO="rule_end" ENV{ID_VENDOR}=="NETAPP*", RUN+="/bin/sh -c 'echo 4096 > /sys%p/queue/max_sectors_kb'" LABEL="rule_end" > > 2. Set max_sectors_kb in devices section of multipath.conf > You will need to stop LVM and then flush the device map , so the new option to take effect (faster is to reboot) > > Good Luck & Happy New Year. > > Best Regards, > Strahil Nikolov > On Dec 31, 2019 17:53, Stefan Wolf <shb256(a)gmail.com> wrote: > > > > hi all, > > > > i ve 4 nodes running with current ovirt. > > I ve only a problem on one host even after a fresh installation . > > I ve installed the latest image. > > Than I add the node to the cluster > > Everything is working good. > > After this I configure the network. > > BUT, after a restart the host does not come up again. > > I got this error: blk_cloned_rq_check_limits: over max size limit > > every 5 seconds > > > > I can continue with control-D > > or I can login with root password to fix the problem. but i dont know what is the problem and where does it came from > > > > I ve also changed the sas disk to nvme storage, but I ve changed this on every host. And this problem exists only on one host > > > > i found this https://lists.centos.org/pipermail/centos/2017-December/167727.html > > the output is > > [root@kvm380 ~]# ./test.sh > > Sys Block Node : Device max_sectors_kb max_hw_sectors_kb > > /sys/block/dm-0 : onn_kvm380-pool00_tmeta 256 4096 > > /sys/block/dm-1 : onn_kvm380-pool00_tdata 256 4096 > > /sys/block/dm-10 : onn_kvm380-var 256 4096 > > /sys/block/dm-11 : onn_kvm380-tmp 256 4096 > > /sys/block/dm-12 : onn_kvm380-home 256 4096 > > /sys/block/dm-13 : onn_kvm380-var_crash 256 4096 > > /sys/block/dm-2 : onn_kvm380-pool00-tpool 256 4096 > > /sys/block/dm-3 : onn_kvm380-ovirt--node--ng--4.3.7--0.20191121.0+1 256 4096 > > /sys/block/dm-4 : onn_kvm380-swap 256 4096 > > /sys/block/dm-5 : eui.0025385991b1e27a 512 2048 > > /sys/block/dm-6 : eui.0025385991b1e27a1 512 2048 > > /sys/block/dm-7 : onn_kvm380-pool00 256 4096 > > /sys/block/dm-8 : onn_kvm380-var_log_audit 256 4096 > > /sys/block/dm-9 : onn_kvm380-var_log 256 4096 > > cat: /sys/block/nvme0n1/device/vendor: Datei oder Verzeichnis nicht gefunden > > /sys/block/nvme0n1: Samsung SSD 970 EVO 1TB 512 2048 > > /sys/block/sda : HP LOGICAL VOLUME 256 4096 > > > > is the nvme not starting correct > > [root@kvm380 ~]# systemctl status multipathd > > ● multipathd.service - Device-Mapper Multipath Device Controller > > Loaded: loaded (/usr/lib/systemd/system/multipathd.service; enabled; vendor preset: enabled) > > Active: active (running) since Di 2019-12-31 16:16:32 CET; 31min ago > > Process: 1919 ExecStart=/sbin/multipathd (code=exited, status=0/SUCCESS) > > Process: 1916 ExecStartPre=/sbin/multipath -A (code=exited, status=0/SUCCESS) > > Process: 1911 ExecStartPre=/sbin/modprobe dm-multipath (code=exited, status=0/SUCCESS) > > Main PID: 1921 (multipathd) > > Tasks: 7 > > CGroup: /system.slice/multipathd.service > > └─1921 /sbin/multipathd > > > > Dez 31 16:47:58 kvm380.durchhalten.intern multipathd[1921]: nvme0n1: mark as failed > > Dez 31 16:47:58 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: Entering recovery mode: max_retries=4 > > Dez 31 16:47:58 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: remaining active paths: 0 > > Dez 31 16:48:02 kvm380.durchhalten.intern multipathd[1921]: 259:0: reinstated > > Dez 31 16:48:02 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: queue_if_no_path enabled > > Dez 31 16:48:02 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: Recovered to normal mode > > Dez 31 16:48:02 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: remaining active paths: 1 > > Dez 31 16:48:03 kvm380.durchhalten.intern multipathd[1921]: nvme0n1: mark as failed > > Dez 31 16:48:03 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: Entering recovery mode: max_retries=4 > > Dez 31 16:48:03 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: remaining active paths: 0 > > > > why is it marked as failed? > > > > if i create a new volume with cockpit and use it for bricks for gluster, every thing is fine. until reboot > > > > > > maybe some one can point me the direction > > _______________________________________________ > > Users mailing list -- users(a)ovirt.org > > To unsubscribe send an email to users-leave(a)ovirt.org > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/MHHFFWAY5T5BV…

1 0

Re: Node not starting | blk_cloned_rq_check_limits: over max size limit
by Strahil 31 Dec '19

31 Dec '19

You can check https://access.redhat.com/solutions/2437991 & https://access.redhat.com/solutions/3014361 You have 2 options: 1. Set a udev rule like this one (replace NETAPP with your storage) ACTION!="add|change", GOTO="rule_end" ENV{ID_VENDOR}=="NETAPP*", RUN+="/bin/sh -c 'echo 4096 > /sys%p/queue/max_sectors_kb'" LABEL="rule_end" 2. Set max_sectors_kb in devices section of multipath.conf You will need to stop LVM and then flush the device map , so the new option to take effect (faster is to reboot) Good Luck & Happy New Year. Best Regards, Strahil Nikolov On Dec 31, 2019 17:53, Stefan Wolf <shb256(a)gmail.com> wrote: > > hi all, > > i ve 4 nodes running with current ovirt. > I ve only a problem on one host even after a fresh installation . > I ve installed the latest image. > Than I add the node to the cluster > Everything is working good. > After this I configure the network. > BUT, after a restart the host does not come up again. > I got this error: blk_cloned_rq_check_limits: over max size limit > every 5 seconds > > I can continue with control-D > or I can login with root password to fix the problem. but i dont know what is the problem and where does it came from > > I ve also changed the sas disk to nvme storage, but I ve changed this on every host. And this problem exists only on one host > > i found this https://lists.centos.org/pipermail/centos/2017-December/167727.html > the output is > [root@kvm380 ~]# ./test.sh > Sys Block Node : Device max_sectors_kb max_hw_sectors_kb > /sys/block/dm-0 : onn_kvm380-pool00_tmeta 256 4096 > /sys/block/dm-1 : onn_kvm380-pool00_tdata 256 4096 > /sys/block/dm-10 : onn_kvm380-var 256 4096 > /sys/block/dm-11 : onn_kvm380-tmp 256 4096 > /sys/block/dm-12 : onn_kvm380-home 256 4096 > /sys/block/dm-13 : onn_kvm380-var_crash 256 4096 > /sys/block/dm-2 : onn_kvm380-pool00-tpool 256 4096 > /sys/block/dm-3 : onn_kvm380-ovirt--node--ng--4.3.7--0.20191121.0+1 256 4096 > /sys/block/dm-4 : onn_kvm380-swap 256 4096 > /sys/block/dm-5 : eui.0025385991b1e27a 512 2048 > /sys/block/dm-6 : eui.0025385991b1e27a1 512 2048 > /sys/block/dm-7 : onn_kvm380-pool00 256 4096 > /sys/block/dm-8 : onn_kvm380-var_log_audit 256 4096 > /sys/block/dm-9 : onn_kvm380-var_log 256 4096 > cat: /sys/block/nvme0n1/device/vendor: Datei oder Verzeichnis nicht gefunden > /sys/block/nvme0n1: Samsung SSD 970 EVO 1TB 512 2048 > /sys/block/sda : HP LOGICAL VOLUME 256 4096 > > is the nvme not starting correct > [root@kvm380 ~]# systemctl status multipathd > ● multipathd.service - Device-Mapper Multipath Device Controller > Loaded: loaded (/usr/lib/systemd/system/multipathd.service; enabled; vendor preset: enabled) > Active: active (running) since Di 2019-12-31 16:16:32 CET; 31min ago > Process: 1919 ExecStart=/sbin/multipathd (code=exited, status=0/SUCCESS) > Process: 1916 ExecStartPre=/sbin/multipath -A (code=exited, status=0/SUCCESS) > Process: 1911 ExecStartPre=/sbin/modprobe dm-multipath (code=exited, status=0/SUCCESS) > Main PID: 1921 (multipathd) > Tasks: 7 > CGroup: /system.slice/multipathd.service > └─1921 /sbin/multipathd > > Dez 31 16:47:58 kvm380.durchhalten.intern multipathd[1921]: nvme0n1: mark as failed > Dez 31 16:47:58 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: Entering recovery mode: max_retries=4 > Dez 31 16:47:58 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: remaining active paths: 0 > Dez 31 16:48:02 kvm380.durchhalten.intern multipathd[1921]: 259:0: reinstated > Dez 31 16:48:02 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: queue_if_no_path enabled > Dez 31 16:48:02 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: Recovered to normal mode > Dez 31 16:48:02 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: remaining active paths: 1 > Dez 31 16:48:03 kvm380.durchhalten.intern multipathd[1921]: nvme0n1: mark as failed > Dez 31 16:48:03 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: Entering recovery mode: max_retries=4 > Dez 31 16:48:03 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: remaining active paths: 0 > > why is it marked as failed? > > if i create a new volume with cockpit and use it for bricks for gluster, every thing is fine. until reboot > > > maybe some one can point me the direction > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/MHHFFWAY5T5BV…

1 0

Node not starting | blk_cloned_rq_check_limits: over max size limit
by Stefan Wolf 31 Dec '19

31 Dec '19

hi all, i ve 4 nodes running with current ovirt. I ve only a problem on one host even after a fresh installation . I ve installed the latest image. Than I add the node to the cluster Everything is working good. After this I configure the network. BUT, after a restart the host does not come up again. I got this error: blk_cloned_rq_check_limits: over max size limit every 5 seconds I can continue with control-D or I can login with root password to fix the problem. but i dont know what is the problem and where does it came from I ve also changed the sas disk to nvme storage, but I ve changed this on every host. And this problem exists only on one host i found this https://lists.centos.org/pipermail/centos/2017-December/167727.html the output is [root@kvm380 ~]# ./test.sh Sys Block Node : Device max_sectors_kb max_hw_sectors_kb /sys/block/dm-0 : onn_kvm380-pool00_tmeta 256 4096 /sys/block/dm-1 : onn_kvm380-pool00_tdata 256 4096 /sys/block/dm-10 : onn_kvm380-var 256 4096 /sys/block/dm-11 : onn_kvm380-tmp 256 4096 /sys/block/dm-12 : onn_kvm380-home 256 4096 /sys/block/dm-13 : onn_kvm380-var_crash 256 4096 /sys/block/dm-2 : onn_kvm380-pool00-tpool 256 4096 /sys/block/dm-3 : onn_kvm380-ovirt--node--ng--4.3.7--0.20191121.0+1 256 4096 /sys/block/dm-4 : onn_kvm380-swap 256 4096 /sys/block/dm-5 : eui.0025385991b1e27a 512 2048 /sys/block/dm-6 : eui.0025385991b1e27a1 512 2048 /sys/block/dm-7 : onn_kvm380-pool00 256 4096 /sys/block/dm-8 : onn_kvm380-var_log_audit 256 4096 /sys/block/dm-9 : onn_kvm380-var_log 256 4096 cat: /sys/block/nvme0n1/device/vendor: Datei oder Verzeichnis nicht gefunden /sys/block/nvme0n1: Samsung SSD 970 EVO 1TB 512 2048 /sys/block/sda : HP LOGICAL VOLUME 256 4096 is the nvme not starting correct [root@kvm380 ~]# systemctl status multipathd ● multipathd.service - Device-Mapper Multipath Device Controller Loaded: loaded (/usr/lib/systemd/system/multipathd.service; enabled; vendor preset: enabled) Active: active (running) since Di 2019-12-31 16:16:32 CET; 31min ago Process: 1919 ExecStart=/sbin/multipathd (code=exited, status=0/SUCCESS) Process: 1916 ExecStartPre=/sbin/multipath -A (code=exited, status=0/SUCCESS) Process: 1911 ExecStartPre=/sbin/modprobe dm-multipath (code=exited, status=0/SUCCESS) Main PID: 1921 (multipathd) Tasks: 7 CGroup: /system.slice/multipathd.service └─1921 /sbin/multipathd Dez 31 16:47:58 kvm380.durchhalten.intern multipathd[1921]: nvme0n1: mark as failed Dez 31 16:47:58 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: Entering recovery mode: max_retries=4 Dez 31 16:47:58 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: remaining active paths: 0 Dez 31 16:48:02 kvm380.durchhalten.intern multipathd[1921]: 259:0: reinstated Dez 31 16:48:02 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: queue_if_no_path enabled Dez 31 16:48:02 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: Recovered to normal mode Dez 31 16:48:02 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: remaining active paths: 1 Dez 31 16:48:03 kvm380.durchhalten.intern multipathd[1921]: nvme0n1: mark as failed Dez 31 16:48:03 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: Entering recovery mode: max_retries=4 Dez 31 16:48:03 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: remaining active paths: 0 why is it marked as failed? if i create a new volume with cockpit and use it for bricks for gluster, every thing is fine. until reboot maybe some one can point me the direction

1 0

4.2.8 to 4.3.7 > Management slow
by Demeter Tibor 31 Dec '19

31 Dec '19

Dear Users, I've successfully upgraded my 4 node hyperconverged system from 4.2.8 to 4.3.7. After upgrade everything seems to working fine, but the whole management system seems very slow. Spends many seconds when I clicking on "virtual machines" or I want to edit a virtual machines. The speed of vms and the IO is fine. It is running on a glusterfs (distributed replicate, on 3 node, 9 bricks). There are no errors, everything fine. but terrible slow:( The engine vm has 0.2-0.3 load. What can I do? Thanks in advance and I wish Happy New Year! Regards, Tibor

1 0

Re: Issue deploying self hosted engine on new install
by Strahil 31 Dec '19

31 Dec '19

Hi, Most probably it is a bug. Can you add 'debugger: on_failed' to the task ? Maybe it will provide a hint where is the issue. Best Regards, Strahil NikolovOn Dec 31, 2019 06:36, realapyo(a)gmail.com wrote: > > Hi, > > I have encountered the same error that results in the failure of hosted engine deployment. I have tried to replace "ovirt_host_facts" by "ovirt_host_info" in /usr/share/ansible/roles/ovirt.hosted_engine_setup/tasks/bootstrap_local_vm/05_add_host.yml however it did not help with the following error message: > > 2019-12-31 11:23:27,595+0900 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:109 TASK [ovirt.hosted_engine_setup : Wait for the host to be up] > 2019-12-31 11:23:28,997+0900 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:103 {u'msg': u"The conditional check 'host_result_up_check is succeeded and host_result_up_check.ansible_facts.ovirt_hosts|length >= 1 and ( host_result_up_check.ansible_facts.ovirt_hosts[0].status == 'up' or host_result_up_check.ansible_facts.ovirt_hosts[0].status == 'non_operational' )' failed. The error was: error while evaluating conditional (host_result_up_check is succeeded and host_result_up_check.ansible_facts.ovirt_hosts|length >= 1 and ( host_result_up_check.ansible_facts.ovirt_hosts[0].status == 'up' or host_result_up_check.ansible_facts.ovirt_hosts[0].status == 'non_operational' )): 'dict object' has no attribute 'ansible_facts'", u'_ansible_no_log': False} > 2019-12-31 11:23:29,098+0900 ERROR otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:107 fatal: [localhost]: FAILED! => {"msg": "The conditional check 'host_result_up_check is succeeded and host_result_up_check.ansible_facts.ovirt_hosts|length >= 1 and ( host_result_up_check.ansible_facts.ovirt_hosts[0].status == 'up' or host_result_up_check.ansible_facts.ovirt_hosts[0].status == 'non_operational' )' failed. The error was: error while evaluating conditional (host_result_up_check is succeeded and host_result_up_check.ansible_facts.ovirt_hosts|length >= 1 and ( host_result_up_check.ansible_facts.ovirt_hosts[0].status == 'up' or host_result_up_check.ansible_facts.ovirt_hosts[0].status == 'non_operational' )): 'dict object' has no attribute 'ansible_facts'"} > > According to the latest doc of Ansible (2.9) regarding "ovirt_host_facts", it is deprecated and one should use "ovirt_host_info" instead as you can refer here: https://docs.ansible.com/ansible/latest/modules/ovirt_host_facts_module.html > > And one of the requirements to use "ovirt_host_info" is "ovirt-engine-sdk-python >= 4.3.0" however in my installation, the installed package is "python-ovirt-engine-sdk4 (4.3.2-2.el7)" instead of "ovirt-engine-sdk-python". The "ovirt-engine-sdk-python" package is available however the version is 3.6.9.1-1.el7. > > I have been trying to install the latest oVirt (based in 4.3 repository) and hyperconverged mode using 3 nodes. Tried already with cockpit installation and now debugging it by using CLI installation. > > Is this a bug or is there already a fix? > > Best regards, > Sang-Un > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/V2OYCPZAHUVLF…

1 0

Re: Cannot add Foreman as a provider
by Strahil 30 Dec '19

30 Dec '19

Maybe 6.1 means Foreman with Red Hat Satellite 6.1 ? Best Regards, Strahil NikolovOn Dec 30, 2019 16:41, Robert Webb <rwebb(a)ropeguru.com> wrote: > > oVirt – 4.3.7 > > Foreman - foreman-1.24.0-15.el7.noarch > > > > I have not tried any downgrades at this point. > > > > Looking at this page, https://www.ovirt.org/documentation/admin-guide/chap-External_Providers.html , it would seem that 4.3.x of oVirt is not compatible with any version of Foreman, as the page shows oVirt 4.2 is supported with Foreman 6.1. Which also confuses me as I cannot find any Foreman version 6.1. > > > > > > From: Strahil Nikolov <hunter86_bg(a)yahoo.com> > Sent: Sunday, December 29, 2019 5:00 PM > To: users <users(a)ovirt.org>; Robert Webb <rwebb(a)ropeguru.com> > Subject: Re: [ovirt-users] Cannot add Foreman as a provider > >

2 1

Re: Cannot add Foreman as a provider
by Strahil Nikolov 30 Dec '19

30 Dec '19

Hi Robert, I'm just speculating, but maybe the package on the oVirt is too new or too old ? What version is your Foreman ? Have you tried to downgrade/upgrade the packages for the integration between the 2 systems ? Best Regards,Strahil Nikolov В неделя, 29 декември 2019 г., 18:53:53 ч. Гринуич+2, Robert Webb <rwebb(a)ropeguru.com> написа: So I just setup a brand new Foreman instance and have been trying to get it setup with oVirt. I was able to install the oVirt plugins under Foreman and have the oVirt engine setup as a computer resource. Where I am running into an issue is adding Foreman as an additional provider under oVirt. In the log I get: Command 'org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand' failed: EngineException: https://foreman.saroza-webb.internal:443/api/v2/discovered_hosts?format=jso… (Failed with error PROVIDER_FAILURE and code 5050) I have done some searching, but everything I have found seems to be from years ago and deals with oVirt 3.5.x Any thoughts? _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/CO64DW24PDJJC…

2 1

Re: what is "use host" field in storage domain creation??
by Strahil 30 Dec '19

30 Dec '19

I think SPM is not doing initial setup - just other tasks - like snapshots creation/deletion. Best Regards, Strahil NikolovOn Dec 30, 2019 11:57, yam yam <hyunooudy(a)gmail.com> wrote: > > isn't it SPM's job? > and is the "use host" required only for setup? > > thanks for quick replying. > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/IRQCB37EXLOHQ…

1 0