- Users - oVirt List Archives

Re: Recreate engine without backup
by Igor Filipovic 10 Apr '24

10 Apr '24

Hi, I managed to resolve this issue. Long story short : - take configuration details from hosts about disks (especially if direct disks are being used, commands like multipath -ll, lsblk, blkid...) - take a xml dump from all running VM's - install new standalone engine - add existing hosts to new image (running machines were detected with prefix "external" - configure logical networks after checking hosts network adapters - if direct disks exists in your configuration, create virtual disks for them by using xml dump files and info from hosts - shutdown running vm's (all with prefix "external") - shutdown all kvm hosts and left only one kvm host running (to prevent sanlock) - import existing storage domain from running host - use VM import tab in Storage domain to view vm's available for import - delete machines with prefix "external" because import detect machines with same VM ID - run import VM's from storage domain, one by one ... and that's it, after import run the machines ***If there are no VM's listed in VM import tab after adding storage domain, than you need to import disks from Disk import tab in storage domain, and then manually create virtual machines with information from xml dump files (to be able to configure disks,networks,cpu,ram ... like it was originally configured). After creating VM's you should be able to run them.*** Maybe it can help someone. Best regards, Igor

1 0

FQDN error while creating ovirt engine
by Marouane 07 Apr '24

07 Apr '24

Hi All, I'm using a fresh 4.5.5 install, when I try to create the ovirt engine, I get the below error : The task includes an option with an undefined variable. The error was: list object has no element 0. list object has no element 0\nThe error appears to be in '/usr/share/ansible/collections/ansible_collections/ovirt/ovirt/roles/hosted_engine_setup/tasks/fetch_host_ip.yml': line 32, column 7, but may\nbe elsewhere in the file depending on the exact syntax problem.\n\nThe offending line appears to be:\n\n when: hostname_resolution_output.rc != 0\n - name: Parse host address resolution\n ^ here\n I tried adding entries to my DNS or setting the local /etc/hosts as follows: 192.168.1.2 ovirt-engine-01 ovirt-engine-01.localdomain in both cases I get the same error...Any ideas how to fix this?

2 1

Abnormal behavior on the reinstalled host
by ricardoot＠gmail.com 06 Apr '24

06 Apr '24

Hello everyone, I need help again with a host that I have reinstalled l and I don't understand why it doesn't work well. I have managed to get the host status to UP. But I can't migrate MV to this host. Yes, I can start a VM on this host and I can migrate it to another but it can't go back if you want. These are the errors I see: ID: 128 2024-03-19 20:34:56,809+01 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-77603) [6ea57120-4e64-4b1d-a31f- 1072f69c478b] EVENT_ID: VM_MIGRATION_TRYING_RERUN(128), Failed to migrate VM srvlinux to Host ovirt51.mydomain due to an Error: Fatal error during migration. Trying to migrate to another Host. It also happens that I cannot access the noVNC console on this Host but the VM is running. It gives me this error: "Something went wrong, connection is closed" If I put the host in maintenance mode it does not activate again and gives an error: Operation Canceled Error while executing action: ovirt51.mydomain: Cannot activate Host. Host has no unique id. Resolved by reinstalling the host and checking to activate it. But it doesn't seem normal to me. Please does anyone know how to resolve these issues? Thank you. OS Version: RHEL - 8.9 - 1.8.el8 OS Description: Rocky Linux 8.9 (Green Obsidian) Kernel Version: 4.18.0 - 513.18.1.el8_9.x86_64 KVM Version: 6.2.0 - 40.module+el8.9.0+1654+f4df84c4.2 LIBVIRT Version: libvirt-8.0.0-22.module+el8.9.0+1405+b6048078 VDSM Version: vdsm-4.50.6-3.git5d82b9e88.el8 SPICE Version: 0.14.3 - 4.el8 GlusterFS Version: glusterfs-10.5-1.el8s CEPH Version: librbd1-16.2.15-1.el8s Open vSwitch Version: openvswitch-2.15-4.el8 Nmstate Version: nmstate-1.4.5-2.el8_9 Kernel Features: MDS: (Not affected), L1TF: (Not affected), SRBDS: (Not affected), MELTDOWN: (Not affected), RETBLEED: (Not affected), SPECTRE_V1: (Mitigation: usercopy/swapgs barriers and __user pointer sanitization), SPECTRE_V2: (Mitigation: Enhanced / Automatic IBRS, IBPB: conditional, RSB filling, PBRSB-eIBRS: SW sequence), ITLB_MULTIHIT: (Not affected), MMIO_STALE_DATA: (Mitigation: Clear CPU buffers; SMT vulnerable), TSX_ASYNC_ABORT: (Not affected), SPEC_STORE_BYPASS: (Mitigation: Speculative Store Bypass disabled via prctl), GATHER_DATA_SAMPLING: (Mitigation: Microcode), SPEC_RSTACK_OVERFLOW: (Not affected) VNC Encryption: Enabled OVN configured: No

4 4

Hosted engine installation oVirt 4.5 initialize lockspace volume
by lbayerlein＠lbayerlein.de 03 Apr '24

03 Apr '24

Hello, hope, you are doing well. I try to install a new hosted engine on my environment to switch the storage this engine. I use following command to deploy the instance: hosted-engine --deploy --4 --ansible-extra-vars=he_offline_deployment=true Everything works fine, except the initialization of lockspace volume. Here I get: ``` [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Remove temporary entry in /etc/hosts for the local VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set the name for add_host] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch the value of HOST_KEY_CHECKING] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get the username running the deploy] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Register the engine FQDN as a host] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Start ovirt-ha-broker service on the host] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Initialize lockspace volume] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Workaround for ovirt-ha-broker start failures] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Initialize lockspace volume] [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 5, "changed": true, "cmd": ["hosted-engine", "--reinitialize-lock space", "--force"], "delta": "0:00:00.269920", "end": "2024-03-20 14:43:00.366557", "msg": "non-zero return code", "rc" : 1, "start": "2024-03-20 14:43:00.096637", "stderr": "Traceback (most recent call last):\n File \"/usr/lib64/python3. 6/runpy.py\", line 193, in _run_module_as_main\n \"__main__\", mod_spec)\n File \"/usr/lib64/python3.6/runpy.py\", line 85, in _run_code\n exec(code, run_globals)\n File \"/usr/lib/python3.6/site-packages/ovirt_hosted_engine_setup /reinitialize_lockspace.py\", line 30, in <module>\n ha_cli.reset_lockspace(force)\n File \"/usr/lib/python3.6/site -packages/ovirt_hosted_engine_ha/client/client.py\", line 286, in reset_lockspace\n stats = broker.get_stats_from_st orage()\n File \"/usr/lib/python3.6/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py\", line 148, in get_stats_f rom_storage\n result = self._proxy.get_stats()\n File \"/usr/lib64/python3.6/xmlrpc/client.py\", line 1112, in __ca ll__\n return self.__send(self.__name, args)\n File \"/usr/lib64/python3.6/xmlrpc/client.py\", line 1452, in __requ est\n verbose=self.__verbose\n File \"/usr/lib64/python3.6/xmlrpc/client.py\", line 1154, in request\n return se lf.single_request(host, handler, request_body, verbose)\n File \"/usr/lib64/python3.6/xmlrpc/client.py\", line 1166, i n single_request\n http_conn = self.send_request(host, handler, request_body, verbose)\n File \"/usr/lib64/python3. 6/xmlrpc/client.py\", line 1279, in send_request\n self.send_content(connection, request_body)\n File \"/usr/lib64/ python3.6/xmlrpc/client.py\", line 1309, in send_content\n connection.endheaders(request_body)\n File \"/usr/lib64/ python3.6/http/client.py\", line 1268, in endheaders\n self._send_output(message_body, encode_chunked=encode_chunked )\n File \"/usr/lib64/python3.6/http/client.py\", line 1044, in _send_output\n self.send(msg)\n File \"/usr/lib64/ python3.6/http/client.py\", line 982, in send\n self.connect()\n File \"/usr/lib/python3.6/site-packages/ovirt_host ed_engine_ha/lib/unixrpc.py\", line 76, in connect\n self.sock.connect(base64.b16decode(self.host))\nFileNotFoundErr or: [Errno 2] No such file or directory", "stderr_lines": ["Traceback (most recent call last):", " File \"/usr/lib64/p ython3.6/runpy.py\", line 193, in _run_module_as_main", " \"__main__\", mod_spec)", " File \"/usr/lib64/python3.6/r unpy.py\", line 85, in _run_code", " exec(code, run_globals)", " File \"/usr/lib/python3.6/site-packages/ovirt_host ed_engine_setup/reinitialize_lockspace.py\", line 30, in <module>", " ha_cli.reset_lockspace(force)", " File \"/usr /lib/python3.6/site-packages/ovirt_hosted_engine_ha/client/client.py\", line 286, in reset_lockspace", " stats = bro ker.get_stats_from_storage()", " File \"/usr/lib/python3.6/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py\", l ine 148, in get_stats_from_storage", " result = self._proxy.get_stats()", " File \"/usr/lib64/python3.6/xmlrpc/clie nt.py\", line 1112, in __call__", " return self.__send(self.__name, args)", " File \"/usr/lib64/python3.6/xmlrpc/cl ient.py\", line 1452, in __request", " verbose=self.__verbose", " File \"/usr/lib64/python3.6/xmlrpc/client.py\", l ine 1154, in request", " return self.single_request(host, handler, request_body, verbose)", " File \"/usr/lib64/pyt hon3.6/xmlrpc/client.py\", line 1166, in single_request", " http_conn = self.send_request(host, handler, request_bod y, verbose)", " File \"/usr/lib64/python3.6/xmlrpc/client.py\", line 1279, in send_request", " self.send_content(co nnection, request_body)", " File \"/usr/lib64/python3.6/xmlrpc/client.py\", line 1309, in send_content", " connecti on.endheaders(request_body)", " File \"/usr/lib64/python3.6/http/client.py\", line 1268, in endheaders", " self._se nd_output(message_body, encode_chunked=encode_chunked)", " File \"/usr/lib64/python3.6/http/client.py\", line 1044, in _send_output", " self.send(msg)", " File \"/usr/lib64/python3.6/http/client.py\", line 982, in send", " self.co nnect()", " File \"/usr/lib/python3.6/site-packages/ovirt_hosted_engine_ha/lib/unixrpc.py\", line 76, in connect", " self.sock.connect(base64.b16decode(self.host))", "FileNotFoundError: [Errno 2] No such file or directory"], "stdout": "", "stdout_lines": []} ``` And I dont know, what is the reason. I zeroed the iscsi target, rebooted the hypervisor and updated all software packages. ``` [root@hypervisor01 ~]# rpm -qa|grep ovirt-host ovirt-hosted-engine-setup-2.6.5-1.el8.noarch ovirt-host-dependencies-4.5.0-3.el8.x86_64 ovirt-hosted-engine-ha-2.5.0-1.el8.noarch ovirt-host-4.5.0-3.el8.x86_64 ``` I tried the deployment without the ansible arguments. Unfortunately, the same error comes up. What can I do to solve this? Thanks very much balu

2 1

Recreate engine without backup
by Igor Filipovic 03 Apr '24

03 Apr '24

Hi all, I have a situation in which customer has deleted standalone engine completely (it was running on vmware), and all backups were saved on the same machine - so there is no backup available. Can someone suggest how to preserve virtual machines which are still running on kvm hosts, and recreate standalone engine to be able to manage existing kvm hosts and machines? What could be scenario for this? Thanks in advance and best regards! Igor

2 1

Server 2008R2 UEFI ISO Boot Problerm
by Clint Boggio 03 Apr '24

03 Apr '24

Greetings oVirt team I'm using "Version 4.5.7-0.master.20240327074810.git14bca0502d.el8 on CentOS Stream 9" I have occasion to restore a windows backup image for the purpose of data extraction. To accomplish this I need to boot off a Server 2008R2 ISO. The machine to be restored was UEFI based originally and so it is required to be UEFI for the restoration process. I seem to be having a problem with booting off of the ISO image in the required UEFI-based system. In pursuit of a solution I've read on some of the other forums about this same problem on other KVM-based platforms. Booting that same ISO after changing the VM to BIOS works flawlessly. In the articles and threads I've read there is mention of hyper-v services that load during the guest boot process that are causing the ISO boot to hang. Is it possible to disable (or is it even necessary to disable) "hv_time,hv_relaxed,hv_spinlocks=0x2000" in the "Custom Properties" section of the VM config ? If any of you have some insight into this problem and a possible solution I'd appreciate the feedback.

2 2

Re: Issue with Accessing oVirt Manager Console
by Gianluca Cecchi 30 Mar '24

30 Mar '24

On Fri, Mar 29, 2024 at 11:59 AM Sachendra Shukla < sachendra.shukla(a)yagnaiq.com> wrote: > Hi Gianluca, > > I hope this email finds you well. I wanted to bring to your attention an > issue regarding the status of ovirt-engine and httpd. While httpd is > showing as active, unfortunately, the ovirt-engine status is indicating a > failure. I have attached the engine logs for your reference to provide more > insight into this matter. I do not want any impact on running VMs. Please > check and provide me the resolution if possible. > It could be related to the ovirt-ovn-provider and/or its certificates, as we get thousands of errors related to it inside engine.log $ grep ERROR /tmp/engine.log | awk '{print $4}' | sort | uniq -c 2532 [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] the last being: 2024-03-28 22:15:33,484+05 ERROR [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-53) [260c120a] Command 'org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand' failed: EngineException: (Failed with error NotAfter: Fri Dec 30 19:27:18 IST 2022 and code 5050) Which version of oVirt are you using? You could try to run this and see if it recreates certificates if this is the problem (or if it asks to regenerate them, say yes). You should not get downtime for VMs. The "--offline" option makes the command only refresh its configuration without going through actual updates or modifications engine-setup --offline It restarts also the needed services (ovirt-provider-ovn too) in the correct order, that could help sometimes HIH, Gianluca

2 1

Re: Issue with Accessing oVirt Manager Console
by Alex K 29 Mar '24

29 Mar '24

On Fri, Mar 29, 2024 at 12:59 PM Sachendra Shukla < sachendra.shukla(a)yagnaiq.com> wrote: > Hi Gianluca, > > I hope this email finds you well. I wanted to bring to your attention an > issue regarding the status of ovirt-engine and httpd. While httpd is > showing as active, unfortunately, the ovirt-engine status is indicating a > failure. I have attached the engine logs for your reference to provide more > insight into this matter. I do not want any impact on running VMs. Please > check and provide me the resolution if possible. > > > [image: image.png] > > Did you try to restart it? systemctl restart ovirt-engine > On Fri, Mar 29, 2024 at 3:43 PM Gianluca Cecchi <gianluca.cecchi(a)gmail.com> > wrote: > >> On the engine host >> . check contents of /var/log/ovirt-engine/engine.log >> >> . check the output of the commands: >> systemctl status ovirt-engine >> systemctl status httpd >> >> . check contents of JBoss instance related logs >> /var/log/ovirt-engine/server.log >> In 4.5.x you should see something like this (see the deployed engine.ear >> and ovirt-web-ui.war lines for example): >> >> 2024-03-26 17:26:29,515+01 INFO [org.wildfly.extension.undertow] >> (ServerService Thread Pool -- 47) WFLYUT0021: Registered web context: >> '/ovirt-engine/docs' for server 'default-server' >> 2024-03-26 17:26:29,530+01 INFO [org.wildfly.extension.undertow] >> (ServerService Thread Pool -- 46) WFLYUT0021: Registered web context: '/' >> for server 'default-server' >> 2024-03-26 17:26:29,575+01 INFO [org.wildfly.extension.undertow] >> (ServerService Thread Pool -- 46) WFLYUT0021: Registered web context: >> '/ovirt-engine/services' for server 'default-server' >> 2024-03-26 17:26:29,588+01 WARN >> [org.jboss.jca.core.connectionmanager.pool.strategy.OnePool] >> (ServerService Thread Pool -- 46) IJ000407: No lazy enlistment available >> for ENGINEDataSource >> 2024-03-26 17:26:29,633+01 INFO [org.wildfly.extension.undertow] >> (ServerService Thread Pool -- 51) WFLYUT0021: Registered web context: >> '/ovirt-engine' for server 'default-server' >> 2024-03-26 17:26:29,648+01 WARN >> [org.jboss.jca.core.connectionmanager.pool.strategy.OnePool] >> (ServerService Thread Pool -- 46) IJ000407: No lazy enlistment available >> for DWHDataSource >> 2024-03-26 17:26:29,666+01 INFO [org.wildfly.extension.undertow] >> (ServerService Thread Pool -- 46) WFLYUT0021: Registered web context: >> '/ovirt-engine/webadmin' for server 'default-server' >> 2024-03-26 17:26:29,843+01 INFO [org.wildfly.extension.undertow] >> (ServerService Thread Pool -- 49) WFLYUT0021: Registered web context: >> '/ovirt-engine/sso' for server 'default-server' >> 2024-03-26 17:26:30,097+01 INFO [org.jboss.as.clustering.infinispan] >> (ServerService Thread Pool -- 50) WFLYCLINF0002: Started timeout-base cache >> from ovirt-engine container >> 2024-03-26 17:26:31,880+01 INFO [org.jboss.as.server] (ServerService >> Thread Pool -- 27) WFLYSRV0010: Deployed "restapi.war" (runtime-name : >> "restapi.war") >> 2024-03-26 17:26:31,880+01 INFO [org.jboss.as.server] (ServerService >> Thread Pool -- 27) WFLYSRV0010: Deployed "ovirt-web-ui.war" (runtime-name : >> "ovirt-web-ui.war") >> 2024-03-26 17:26:31,880+01 INFO [org.jboss.as.server] (ServerService >> Thread Pool -- 27) WFLYSRV0010: Deployed "apidoc.war" (runtime-name : >> "apidoc.war") >> 2024-03-26 17:26:31,880+01 INFO [org.jboss.as.server] (ServerService >> Thread Pool -- 27) WFLYSRV0010: Deployed "engine.ear" (runtime-name : >> "engine.ear") >> 2024-03-26 17:26:31,930+01 INFO [org.jboss.as.server] (Controller Boot >> Thread) WFLYSRV0212: Resuming server >> 2024-03-26 17:26:31,933+01 INFO [org.jboss.as] (Controller Boot Thread) >> WFLYSRV0025: WildFly Full 24.0.1.Final (WildFly Core 16.0.1.Final) started >> in 16651ms - Started 1676 of 1890 services (393 services are lazy, passive >> or on-demand) >> 2024-03-26 17:26:31,940+01 INFO [org.jboss.as] (Controller Boot Thread) >> WFLYSRV0060: Http management interface listening on >> http://127.0.0.1:8706/management >> 2024-03-26 17:26:31,940+01 INFO [org.jboss.as] (Controller Boot Thread) >> WFLYSRV0051: Admin console listening on http://127.0.0.1:8706 >> 2024-03-26 17:41:31,872+01 INFO >> [org.apache.sshd.common.util.security.eddsa.EdDSASecurityProviderRegistrar] >> (EE-ManagedExecutorService-hostUpdatesChecker-Thread-1) >> getOrCreateProvider(EdDSA) created instance of >> net.i2p.crypto.eddsa.EdDSASecurityProvider >> >> eventually if in error try to restart ovirt-engine service >> systemctl restart ovirt-engine >> >> HIH, >> Gianluca >> >> >> >> On Fri, Mar 29, 2024 at 9:59 AM Sachendra Shukla < >> sachendra.shukla(a)yagnaiq.com> wrote: >> >>> Hi Alex, >>> >>> After conducting a thorough check, we have confirmed that all virtual >>> machines are operating smoothly, and the network is functioning without any >>> issues (we can successfully SSH into both the VMs and the manager). >>> Additionally, there is available storage on both the node and the manager. >>> However, we are encountering difficulty accessing the oVirt manager >>> console, as we are consistently receiving a "503 Service Unavailable" error. >>> >>> Thanks, >>> Sachendra >>> >>> > > -- > > Regards, > > > > > > > > > *Sachendra Shukla* > > IT Administrator > > Yagna iQ, Inc. and subsidiaries > > Email: Sachendra.shukla(a)yagnaiq.com <dnyanesh.tisge(a)yagnaiq.com> > > Website: https://yagnaiq.com > > Privacy Policy: https://www.yagnaiq.com/privacy-policy/ > > <https://www.linkedin.com/company/yagnaiq/mycompany/> > <https://www.youtube.com/channel/UCeHXOpcUxWvOJO0aegD99Jg> > > > This communication and any attachments may contain confidential > information and/or Yagna iQ, Inc. copyright material. > > All unauthorized use, disclosure, or distribution is prohibited. If you > are not the intended recipient, please notify Yagna iQ immediately by > replying to the email and destroy all copies of this communication. > > This email has been scanned for all known viruses. The sender does not > accept liability for any damage inflicted by viewing the content of this > email. > >

1 0

Re: Issue with Accessing oVirt Manager Console
by Sachendra Shukla 29 Mar '24

29 Mar '24

Hi Alex, After conducting a thorough check, we have confirmed that all virtual machines are operating smoothly, and the network is functioning without any issues (we can successfully SSH into both the VMs and the manager). Additionally, there is available storage on both the node and the manager. However, we are encountering difficulty accessing the oVirt manager console, as we are consistently receiving a "503 Service Unavailable" error. Thanks, Sachendra On Fri, Mar 29, 2024 at 2:11 PM Alex K <rightkicktech(a)gmail.com> wrote: > > > On Fri, Mar 29, 2024 at 8:26 AM Sachendra Shukla < > sachendra.shukla(a)yagnaiq.com> wrote: > >> Hi Team, >> >> We are currently experiencing difficulties accessing the oVirt Manager >> console. Please find attached a screenshot of the error for your reference. >> >> [image: image.png] >> > You need to check what is causing it. There could be many causes. I would > start to check the engine VM status, storage, network, logs, etc. > > >> Please help me if you have any resolution. >> -- >> >> Regards, >> >> >> >> >> >> >> >> >> *Sachendra Shukla* >> >> IT Administrator >> >> Yagna iQ, Inc. and subsidiaries >> >> Email: Sachendra.shukla(a)yagnaiq.com <dnyanesh.tisge(a)yagnaiq.com> >> >> Website: https://yagnaiq.com >> >> Privacy Policy: https://www.yagnaiq.com/privacy-policy/ >> >> <https://www.linkedin.com/company/yagnaiq/mycompany/> >> <https://www.youtube.com/channel/UCeHXOpcUxWvOJO0aegD99Jg> >> >> >> This communication and any attachments may contain confidential >> information and/or Yagna iQ, Inc. copyright material. >> >> All unauthorized use, disclosure, or distribution is prohibited. If you >> are not the intended recipient, please notify Yagna iQ immediately by >> replying to the email and destroy all copies of this communication. >> >> This email has been scanned for all known viruses. The sender does not >> accept liability for any damage inflicted by viewing the content of this >> email. >> >> _______________________________________________ >> Users mailing list -- users(a)ovirt.org >> To unsubscribe send an email to users-leave(a)ovirt.org >> Privacy Statement: https://www.ovirt.org/privacy-policy.html >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/2W3MRMOOSPB5X… >> > -- Regards, *Sachendra Shukla* IT Administrator Yagna iQ, Inc. and subsidiaries Email: Sachendra.shukla(a)yagnaiq.com <dnyanesh.tisge(a)yagnaiq.com> Website: https://yagnaiq.com Privacy Policy: https://www.yagnaiq.com/privacy-policy/ <https://www.linkedin.com/company/yagnaiq/mycompany/> <https://www.youtube.com/channel/UCeHXOpcUxWvOJO0aegD99Jg> This communication and any attachments may contain confidential information and/or Yagna iQ, Inc. copyright material. All unauthorized use, disclosure, or distribution is prohibited. If you are not the intended recipient, please notify Yagna iQ immediately by replying to the email and destroy all copies of this communication. This email has been scanned for all known viruses. The sender does not accept liability for any damage inflicted by viewing the content of this email.

2 1

Issue with Accessing oVirt Manager Console
by Sachendra Shukla 29 Mar '24

29 Mar '24

Hi Team, We are currently experiencing difficulties accessing the oVirt Manager console. Please find attached a screenshot of the error for your reference. [image: image.png] Please help me if you have any resolution. -- Regards, *Sachendra Shukla* IT Administrator Yagna iQ, Inc. and subsidiaries Email: Sachendra.shukla(a)yagnaiq.com <dnyanesh.tisge(a)yagnaiq.com> Website: https://yagnaiq.com Privacy Policy: https://www.yagnaiq.com/privacy-policy/ <https://www.linkedin.com/company/yagnaiq/mycompany/> <https://www.youtube.com/channel/UCeHXOpcUxWvOJO0aegD99Jg> This communication and any attachments may contain confidential information and/or Yagna iQ, Inc. copyright material. All unauthorized use, disclosure, or distribution is prohibited. If you are not the intended recipient, please notify Yagna iQ immediately by replying to the email and destroy all copies of this communication. This email has been scanned for all known viruses. The sender does not accept liability for any damage inflicted by viewing the content of this email.

1 0