- Users - oVirt List Archives

When I log in ovirt-engine , it show "Unable to log in because the user account is disabled or locked. Contact the system administrator."
by wangyu13476969128＠126.com 11 Nov '19

11 Nov '19

When I log in ovirt-engine，the username and password is correct. But the error show "Unable to log in because the user account is disabled or locked. Contact the system administrator." How can I solve this problem ?

2 1

Long post about gluster issue after 6.5 to 6.6 upgrade and recovery steps
by Strahil Nikolov 10 Nov '19

10 Nov '19

Hello Colleagues, I want to share my experience and especially how I have recovered after a situation where gluster refuses to heal several files of my oVirt Lab. Most probably the situation was caused by the fact that I didn't check if all files were healed before I started the upgrade on the next node , which in a 'replica 2 arbiter1' setup has caused multiple files missing/conflicting and heal fails to happen. Background:1. I have powered off my HostedEngine VM and made a snapshot of the gluster volume2. Started the update , but without screen - I messed it up and decided to revert from the snapshot3. Powered off the volume , restored from snapshot and then started (and again snapshoted the volume)4. Upgrade of the HostedEngine was successfull5. Upgraded the arbiter (ovirt3)6. I forgot to check the heal status on the arbiter and upgraded ovirt1/gluster1 (which maybe was the reason for the issue)7. After gluster1 was healed I saw that some files are left for healing , but expected it will finish till ovirt2/gluster2 is patched8. Sadly my assumption was not right and after the reboot of ovirt2/gluster2 I noticed that some files never heal. Symptoms:2 files per volume never heal (used 'full' mode) even after I 'stat'-ed every file/dir in the volume.Ovirt Dashboard reported multiple errors (50+) that it cannot update the OVF metadata for volume/VM. Here are my notes while I was recovering from the situation. As this is my LAB, I shutdown all VMs (including the HostedEngine) as downtime was not an issue: Heals never complete: # gluster volume heal data_fast4 info Brick gluster1:/gluster_bricks/data_fast4/data_fast4 Status: Connected Number of entries: 0 Brick gluster2:/gluster_bricks/data_fast4/data_fast4 <gfid:d21a6512-eaf6-4859-90cf-eeef2cc0cab8> <gfid:95bc2cd2-8a1e-464e-a384-6b128780d370> Status: Connected Number of entries: 2 Brick ovirt3:/gluster_bricks/data_fast4/data_fast4 <gfid:d21a6512-eaf6-4859-90cf-eeef2cc0cab8> <gfid:95bc2cd2-8a1e-464e-a384-6b128780d370> Status: Connected Number of entries: 2 Mount to get the gfid to path relationship: mount -t glusterfs -o aux-gfid-mount gluster1:/data_fast4 /mnt # getfattr -n trusted.glusterfs.pathinfo -e text /mnt/.gfid/d21a6512-eaf6-4859-90cf-eeef2cc0cab8 getfattr: Removing leading '/' from absolute path names # file: mnt/.gfid/d21a6512-eaf6-4859-90cf-eeef2cc0cab8 trusted.glusterfs.pathinfo="(<REPLICATE:data_fast4-replicate-0> <POSIX(/gluster_bricks/data_fast4/data_fast4):ovirt2.localdomain:/gluster_bricks/data_fast4/data_fast4/.glusterfs/d2/1a/d21a651 2-eaf6-4859-90cf-eeef2cc0cab8> <POSIX(/gluster_bricks/data_fast4/data_fast4):ovirt3.localdomain:/gluster_bricks/data_fast4/data_fast4/.glusterfs/d2/1a/d21a6512-eaf6-4859-90cf-eeef2cc0cab8>)" The local brick (that is supposed to be healed) is missing some data: # ls -l /gluster_bricks/data_fast4/data_fast4/.glusterfs/d2/1a/d21a6512-eaf6-4859-90cf-eeef2cc0cab8 ls: няма достъп до /gluster_bricks/data_fast4/data_fast4/.glusterfs/d2/1a/d21a6512-eaf6-4859-90cf-eeef2cc0cab8: Няма такъв файл или директория Remote is OK: # ssh gluster2 'ls -l /gluster_bricks/data_fast4/data_fast4/.glusterfs/d2/1a/d21a6512-eaf6-4859-90cf-eeef2cc0cab8' -rw-r--r--. 2 vdsm kvm 436 9 ное 19,34 /gluster_bricks/data_fast4/data_fast4/.glusterfs/d2/1a/d21a6512-eaf6-4859-90cf-eeef2cc0cab8 Arbiter is also OK: # ssh ovirt3 'ls -l /gluster_bricks/data_fast4/data_fast4/.glusterfs/d2/1a/d21a6512-eaf6-4859-90cf-eeef2cc0cab8' -rw-r--r--. 2 vdsm kvm 0 9 ное 19,34 /gluster_bricks/data_fast4/data_fast4/.glusterfs/d2/1a/d21a6512-eaf6-4859-90cf-eeef2cc0cab8 Rsync the file/directory from a good brick to broken one: # rsync -avP gluster2:/gluster_bricks/data_fast4/data_fast4/.glusterfs/d2/1a/ /gluster_bricks/data_fast4/data_fast4/.glusterfs/d2/1a/ # ls -l /gluster_bricks/data_fast4/data_fast4/.glusterfs/d2/1a/d21a6512-eaf6-4859-90cf-eeef2cc0cab8 -rw-r--r--. 1 vdsm kvm 436 9 ное 19,34 /gluster_bricks/data_fast4/data_fast4/.glusterfs/d2/1a/d21a6512-eaf6-4859-90cf-eeef2cc0cab8 After a full heal we see our problematic file: # gluster volume heal data_fast4 full Launching heal operation to perform full self heal on volume data_fast4 has been successful Use heal info commands to check status. # gluster volume heal data_fast4 info Brick gluster1:/gluster_bricks/data_fast4/data_fast4 Status: Connected Number of entries: 0 Brick gluster2:/gluster_bricks/data_fast4/data_fast4 /578bca3d-6540-41cd-8e0e-9e3047026484/images/58e197a6-12df-4432-a643-298d40e44130/535ec7f7-f4d1-4d1e-a988-c1e95b4a38ca.meta Status: Connected Number of entries: 1 Brick ovirt3:/gluster_bricks/data_fast4/data_fast4 /578bca3d-6540-41cd-8e0e-9e3047026484/images/58e197a6-12df-4432-a643-298d40e44130/535ec7f7-f4d1-4d1e-a988-c1e95b4a38ca.meta Status: Connected Number of entries: 1 This time the file is missing on both gluster1 (older version) and arbiter: # cat /gluster_bricks/data_fast4/data_fast4/578bca3d-6540-41cd-8e0e-9e3047026484/images/58e197a6-12df-4432-a643-298d40e44130/535ec7f7-f4d1-4d1e-a988-c1e95b4a38ca.meta CTIME=1558265783 DESCRIPTION={"Updated":true,"Size":256000,"Last Updated":"Sat Nov 09 19:24:08 EET 2019","Storage Domains":[{"uuid":"578bca3d-6540-41cd-8e0e-9e3047026484"}],"Disk Description":"OVF_STORE"} DISKTYPE=OVFS DOMAIN=578bca3d-6540-41cd-8e0e-9e3047026484 FORMAT=RAW GEN=0 IMAGE=58e197a6-12df-4432-a643-298d40e44130 LEGALITY=LEGAL MTIME=0 PUUID=00000000-0000-0000-0000-000000000000 SIZE=262144 TYPE=PREALLOCATED VOLTYPE=LEAF EOF # ssh gluster2 cat /gluster_bricks/data_fast4/data_fast4/578bca3d-6540-41cd-8e0e-9e3047026484/images/58e197a6-12df-4432-a643-298d40e44130/535ec7f7-f4d1-4d1e-a988-c1e95b4a38ca.meta CTIME=1558265783 DESCRIPTION={"Updated":true,"Size":256000,"Last Updated":"Sat Nov 09 19:34:33 EET 2019","Storage Domains":[{"uuid":"578bca3d-6540-41cd-8e0e-9e3047026484"}],"Disk Description":"OVF_STORE"} DISKTYPE=OVFS DOMAIN=578bca3d-6540-41cd-8e0e-9e3047026484 FORMAT=RAW GEN=0 IMAGE=58e197a6-12df-4432-a643-298d40e44130 LEGALITY=LEGAL MTIME=0 PUUID=00000000-0000-0000-0000-000000000000 SIZE=262144 TYPE=PREALLOCATED VOLTYPE=LEAF EOF # ssh ovirt3 cat /578bca3d-6540-41cd-8e0e-9e3047026484/images/58e197a6-12df-4432-a643-298d40e44130/535ec7f7-f4d1-4d1e-a988-c1e95b4a38ca.meta cat: /578bca3d-6540-41cd-8e0e-9e3047026484/images/58e197a6-12df-4432-a643-298d40e44130/535ec7f7-f4d1-4d1e-a988-c1e95b4a38ca.meta: Няма такъв файл или директория As we miss the same file on both a brick and arbiter we take another approach: First remove on gluster1 the file to another name: # mv /gluster_bricks/data_fast4/data_fast4/578bca3d-6540-41cd-8e0e-9e3047026484/images/58e197a6-12df-4432-a643-298d40e44130/535ec7f7-f4d1-4d1e-a988-c1e95b4a38ca.meta /gluster_bricks/data_fast4 /data_fast4/578bca3d-6540-41cd-8e0e-9e3047026484/images/58e197a6-12df-4432-a643-298d40e44130/535ec7f7-f4d1-4d1e-a988-c1e95b4a38ca.meta_old Then we copy the file from gluster2 (good brick) # rsync -avP gluster2:/gluster_bricks/data_fast4/data_fast4/578bca3d-6540-41cd-8e0e-9e3047026484/images/58e197a6-12df-4432-a643-298d40e44130/535ec7f7-f4d1-4d1e-a988-c1e95b4a38ca.meta /gluster_ bricks/data_fast4/data_fast4/578bca3d-6540-41cd-8e0e-9e3047026484/images/58e197a6-12df-4432-a643-298d40e44130/535ec7f7-f4d1-4d1e-a988-c1e95b4a38ca.meta receiving incremental file list 535ec7f7-f4d1-4d1e-a988-c1e95b4a38ca.meta 436 100% 425.78kB/s 0:00:00 (xfr#1, to-chk=0/1) sent 43 bytes received 571 bytes 1,228.00 bytes/sec total size is 436 speedup is 0.71 Run full heal: # gluster volume heal data_fast4 full Launching heal operation to perform full self heal on volume data_fast4 has been successful Use heal info commands to check status # gluster volume heal data_fast4 info Brick gluster1:/gluster_bricks/data_fast4/data_fast4 Status: Connected Number of entries: 0 Brick gluster2:/gluster_bricks/data_fast4/data_fast4 Status: Connected Number of entries: 0 Brick ovirt3:/gluster_bricks/data_fast4/data_fast4 Status: Connected Number of entries: 0 And ofcourse umount /mnt I did the above for all oVirt Storage domains and rebooted all nodes (simultaneously) after stopping the whole stack. This one should not be neccessary , but I wanted to be sure that after power outage the cluster will be operational again: systemctl stop ovirt-ha-agent ovirt-ha-broker vdsmd supervdsmd sanlock glusterd/usr/share/glusterfs/scripts/stop-all-gluster-processes.sh Verification:After the reboot , I have tried to set each oVirt storage domain in 'Maintenance' which confirms that engine can update the OVMF meta and then set it back to Active. Without downtime , this will not be possible. I hope this long post will help anyone . PS: I have collected some data for some of the files, that I have ommited as this e-mail is very long. Best Regards,Strahil Nikolov

1 0

oVirt orb python3/fedora 31 support
by Baptiste Agasse 08 Nov '19

08 Nov '19

Hi all, I was an happy user of oVirt orb on my laptop to do some testing (New features, foreman integration tests , ansible modules/playbooks/roles tests...) and it worked realy well, thanks guys ! Last week I've upgraded my laptop to fedora 31 and I have to uninstall ovirt-orb/lago related stuff to be able upgrade to this fedora version (related to python2 dependencies packages missing on fedora 31). Is there any planned python3/fedora 31 support for ovirt-orb/lago-ovirt/lago ? If not there is any simple replacement solution to spin up a light ovirt env to this kind of tests ? Have a nice day. Baptiste

2 1

Network usage data report 0%
by ccesario＠blueit.com.br 08 Nov '19

08 Nov '19

Hello, In Administration Portal and VM Portal the all VMs reports 0% network usage. Even the Hosted Ovirt Engine. It is following the screenshost https://pasteboard.co/IE6gvCg.png https://pasteboard.co/IE6hyuUV.png The other metrics are OK, only network that re reporting 0 My env. https://pasteboard.co/IE6i8AO.png Regards Carlos

2 5

Re: oVirt and Netapp question
by Vrgotic, Marko 08 Nov '19

08 Nov '19

Second attempt 😊 From: "Vrgotic, Marko" <M.Vrgotic(a)activevideo.com> Date: Monday, 4 November 2019 at 14:01 To: "users(a)ovirt.org" <users(a)ovirt.org> Subject: oVirt and Netapp question Dear oVirt, Few months ago our production environment oVirt with main Shared storage via NFS Netapp is live. We have been deploying VMs with thin provisioned HDD 40GB based template, CentOS 7. The Netapp NFS v4 storage volume is 7TB in size, also Thin Provisioned. First attached screenshot shows the space allocation of the production volume from Netapp side. Is there anyone in oVirt community who would be able to tell me the meaning of the 5.31 TB Over Provisioned Space? [A screenshot of a cell phone Description automatically generated] Second attached is the info of the production volume from oVirt side: [A screenshot of a social media post Description automatically generated] What I want to understand is the way how is oVirt reading the volume usage and Netapp and where is the difference. Is the Over Allocated Space something that is just logically used/reserved and will be intelligently re-allocated/re-used as the actual Data Space Used grows or am I looking at oVIrt actually hitting Critical Space Action Blocker and will have to resize the volume? If there is anyone from Netapp or with good Netapp experience that is able to help understanding the data above better, thank you in advance? Kindly awaiting your reply. ----- kind regards/met vrindelijke groet Marko Vrgotic ActiveVideo

2 5

Re: Quick generic Questions
by Christian Reiss 08 Nov '19

08 Nov '19

Hello all, thank you all for your overwhelming support and information. Waking up to a plethora of answers is a great way to start the day. This goes out to all: Thank you! -Christian. On 07/11/2019 18:38, Staniforth, Paul wrote: > Hello Christian, > > here are some useful links > > https://www.ovirt.org/documentation/gluster-hyperconverged/Gluster_Hypercon… > > > https://access.redhat.com/documentation/en-us/red_hat_hyperconverged_infras… > > You need to have at least 1 device for the O/S node install and at least > 1 device for the bricks, so ideally mirror 2 for the O/S and raid the > rest + spare. > > a) Yes the the oVirt node installer has a hyperconverged/gluster mode. > > b) The storage will be shared between all 3 nodes and distributed to > bricks on all 3 nodes. > > c) The VM can start and migrate on / to all nodes if all requirements > are met (mem/cpu/networks) as the storage is shared. > > d) I don't think so > > e) storage network should not die VMs will probably be paused and if > nodes lose access to storage on the master storage domain I think the > engine will restart them depending on fencing policy. > The gluster network should be a separate from the front-end network and > use bonds for resilience. > > f) yes you can add more shared storage domains using ISCSI, FC, NFS > external gluster storage with ISCSI it may be better to use multipath > connections rather than a bond. > > > > Regards, > Paul S. > > > ------------------------------------------------------------------------ > *From:* Christian Reiss <email(a)christian-reiss.de> > *Sent:* 07 November 2019 13:29 > *To:* users <users(a)ovirt.org> > *Subject:* [ovirt-users] Quick generic Questions > Hey folks, > > I am looking at setting up a hyperconverged cluster with 3 nodes (and > oVirt 4.3). Before setting up I have some generic questions that I would > love to get hints or even an answer on. > > First off, the Servers are outfittet with 24 (SSD) drives each in a > HW-RAID. Due to wear-leveling and speed I am looking at RAID10. So I > would end up with one giant sda device. > > a) Partitioning > Using oVirt node installer which will use the full size of /dev/sda is > this still the right solution to Hyperconverged given the gluster issue? > If I understood it correctly gluster is using empty drives or partitions > so a fully utilized drive is of no use here. Does oVirt node installer > have a hyperconverged/ gluster mode? > > b) Storage Location > In this 3 node cluster, creating a VM on node01 will the data for node01 > always end up in the local node01 server? > > c) Starting VMs > Can a VM be migrated or launched from node03 if the data resides on > node01 and node02 (copies 2 with arbiter). > > d) Efficiency / High IO Load > If node01 has high IO Load would additional data be loaded from the > other node which has the copy to even the load? I am aware Virtuozzo > does this. > > e) Storage Network dies > What would happen with node01, node02 and node03 are operational but > only the storage network dies (frontend is still alive as are the nodes). > > f) external isci/ FreeNAS > We have a FreeNAS system with tons of space and fast network > connectivity. Can oVirt handle storage import like remote iscsi target > and run VMs on the ovirt nodes but store data there? > > Thank you for your time to clear this up. > I have found many approaches out there that either are old (oVirt 3) or > even contradict themselves (talk about RAID level...) > > Cheers! > -Christian. > > -- > Christian Reiss - email(a)christian-reiss.de /"\ ASCII Ribbon > support(a)alpha-labs.net \ / Campaign > X against HTML > WEB alpha-labs.net / \ in eMails > > GPG Retrieval > https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgpg.chris… > GPG ID ABCD43C5, 0x44E29126ABCD43C5 > GPG fingerprint = 9549 F537 2596 86BA 733C A4ED 44E2 9126 ABCD 43C5 > > "It's better to reign in hell than to serve in heaven.", > John Milton, Paradise lost. > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: > https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt… > oVirt Code of Conduct: > https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt… > List Archives: > https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ovi… > To view the terms under which this email is distributed, please go to:- > http://leedsbeckett.ac.uk/disclaimer/email/ > -- Christian Reiss - email(a)christian-reiss.de /"\ ASCII Ribbon support(a)alpha-labs.net \ / Campaign X against HTML WEB alpha-labs.net / \ in eMails GPG Retrieval https://gpg.christian-reiss.de GPG ID ABCD43C5, 0x44E29126ABCD43C5 GPG fingerprint = 9549 F537 2596 86BA 733C A4ED 44E2 9126 ABCD 43C5 "It's better to reign in hell than to serve in heaven.", John Milton, Paradise lost.

1 0

Users and VM permissions matrix
by Colin Coe 08 Nov '19

08 Nov '19

Hi all I've been tasked with creating a matrix of users/groups and VMs so we can easily see who has access to what (via SPCIE console). Google has given me a couple of hints but I can get it over the line. --- users_service = connection.system_service().users_service() users = users_service.list() for user in users: username = user.user_name.split('@')[0] # Follow the link to the permissions of the user: perms = connection.follow_link(user.permissions) for perm in perms: if perm.vm: print(username) permissions_service = connection.system_service().permissions_service() print(perm.vm.id) --- The problem is with permissions, the output from above is: --- user1 1b645daf-de26-4f33-9e3b-6a12eadd4618 user2 9c79e763-f78d-4bf9-b8ca-20fe197fd80c user3 f9d00b30-8003-41c3-95a1-10e0c452fa63 user4 1bbadf96-ef95-4ece-b5f3-1fa112aa3571 user5 e9085627-324e-48d3-bc04-52ff7798ddd0 --- I can't work out how to get the actual permissions rather that the ID. Any ideas? Thanks

2 3

Quick generic Questions
by Christian Reiss 07 Nov '19

07 Nov '19

Hey folks, I am looking at setting up a hyperconverged cluster with 3 nodes (and oVirt 4.3). Before setting up I have some generic questions that I would love to get hints or even an answer on. First off, the Servers are outfittet with 24 (SSD) drives each in a HW-RAID. Due to wear-leveling and speed I am looking at RAID10. So I would end up with one giant sda device. a) Partitioning Using oVirt node installer which will use the full size of /dev/sda is this still the right solution to Hyperconverged given the gluster issue? If I understood it correctly gluster is using empty drives or partitions so a fully utilized drive is of no use here. Does oVirt node installer have a hyperconverged/ gluster mode? b) Storage Location In this 3 node cluster, creating a VM on node01 will the data for node01 always end up in the local node01 server? c) Starting VMs Can a VM be migrated or launched from node03 if the data resides on node01 and node02 (copies 2 with arbiter). d) Efficiency / High IO Load If node01 has high IO Load would additional data be loaded from the other node which has the copy to even the load? I am aware Virtuozzo does this. e) Storage Network dies What would happen with node01, node02 and node03 are operational but only the storage network dies (frontend is still alive as are the nodes). f) external isci/ FreeNAS We have a FreeNAS system with tons of space and fast network connectivity. Can oVirt handle storage import like remote iscsi target and run VMs on the ovirt nodes but store data there? Thank you for your time to clear this up. I have found many approaches out there that either are old (oVirt 3) or even contradict themselves (talk about RAID level...) Cheers! -Christian. -- Christian Reiss - email(a)christian-reiss.de /"\ ASCII Ribbon support(a)alpha-labs.net \ / Campaign X against HTML WEB alpha-labs.net / \ in eMails GPG Retrieval https://gpg.christian-reiss.de GPG ID ABCD43C5, 0x44E29126ABCD43C5 GPG fingerprint = 9549 F537 2596 86BA 733C A4ED 44E2 9126 ABCD 43C5 "It's better to reign in hell than to serve in heaven.", John Milton, Paradise lost.

4 3

Re: Quick generic Questions
by Strahil 07 Nov '19

07 Nov '19

On Nov 7, 2019 15:29, Christian Reiss <email(a)christian-reiss.de> wrote: > > Hey folks, > > I am looking at setting up a hyperconverged cluster with 3 nodes (and > oVirt 4.3). Before setting up I have some generic questions that I would > love to get hints or even an answer on. > > First off, the Servers are outfittet with 24 (SSD) drives each in a > HW-RAID. Due to wear-leveling and speed I am looking at RAID10. So I > would end up with one giant sda device. Go with RAID 0 , or RAID5/6 as you will have the same data on all nodes (3 copies in total) . > a) Partitioning > Using oVirt node installer which will use the full size of /dev/sda is > this still the right solution to Hyperconverged given the gluster issue? > If I understood it correctly gluster is using empty drives or partitions > so a fully utilized drive is of no use here. Does oVirt node installer > have a hyperconverged/ gluster mode? The cockpit installer can prepare the gluster infrastructure and then the oVirt cluster > b) Storage Location > In this 3 node cluster, creating a VM on node01 will the data for node01 > always end up in the local node01 server? Nope , all data is replicated on all 3 nodes (or on 2 nodes when using 'replica 2 arbiter1' volumes). > c) Starting VMs > Can a VM be migrated or launched from node03 if the data resides on > node01 and node02 (copies 2 with arbiter). As gluster is a shared storage, the VMs can migrate on any host that has access to the storage (in your case any of the 3 nodes). > d) Efficiency / High IO Load > If node01 has high IO Load would additional data be loaded from the > other node which has the copy to even the load? I am aware Virtuozzo > does this. Gluster Clients (in this case oVirt node) reads from all 3 nodes simultaneously for better I/O. Same is valid for writes. > e) Storage Network dies > What would happen with node01, node02 and node03 are operational but > only the storage network dies (frontend is still alive as are the nodes). Nodes will become unoperational and all VMs will be paused until storage is restored. > f) external isci/ FreeNAS > We have a FreeNAS system with tons of space and fast network > connectivity. Can oVirt handle storage import like remote iscsi target > and run VMs on the ovirt nodes but store data there? Yep. > Thank you for your time to clear this up. > I have found many approaches out there that either are old (oVirt 3) or > even contradict themselves (talk about RAID level...) > > Cheers! > -Christian

1 0

Re: DHCP Client in Guest VM does not work on ovirtmgmt
by Strahil 07 Nov '19

07 Nov '19

All my VMs are using DHCP over ovirtmgmt network. So, yes it should be possible. Are yoiu sure that your hosts' network is in sync ? Best Regards, Strahil NikolovOn Nov 7, 2019 00:21, Dominik Holler <dholler(a)redhat.com> wrote: > > The output of "tcpdump -i ovirtmgmt -pvn port 67 and port 68" in https://pastebin.com/a2DEyL0e looks like the DHCP reply does not reach the ovirtmgmt bridge. > Is the ovirtmgmt bridge / network attachment on the host able to receive configuration by DHCP? > > On Wed, Nov 6, 2019 at 7:08 PM <ccesario(a)blueit.com.br> wrote: >> >> Hi Ales, have you any new tip about this? >> >> regards, >> Carlos >> _______________________________________________ >> Users mailing list -- users(a)ovirt.org >> To unsubscribe send an email to users-leave(a)ovirt.org >> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/BM7J3AREZ2X6Y…

1 0