- Users - oVirt List Archives

ovirt-engine-extension-aaa-ldap-setup
by Rick A 09 Sep '19

09 Sep '19

Trying to get oVirt to use LDAP for user authentication. It seems to bind, but when I test it (Login Flow and Search) before applying the settings, I get the message below (I can confirm the credentials ARE valid). I also tried to set it up manually and still get the same result. I'm using the same information on Bugzilla and it works fine. I've seen similar threads here but without much answers. Anyone have any good links or docs I can view to get this set up? oVirt Node Version: 4.3.3.6-1.el7 API: <--Authn.InvokeCommands.AUTHENTICATE_CREDENTIALS profile='mydomain.com' result=CREDENTIALS_INVALID

3 5

network config change
by mailing-ovirt＠qic.ca 09 Sep '19

09 Sep '19

Greetings, So we have a single hosted engine ovirt box deployed. When this was deployed, the network requirements were poorly determined and there was no port teaming or any vlan configuration. now we need to change that. I have searched all over for any form of procedure or guide as to how we do this. in summary: I need to go from a setup that uses em1 as it's default device and gateway to a setup where em1 and 3 are bonded into bond0 and now use that instead. As for the vlan we could live with keeping the native vlan configured on the cisco side for management and only add extra ones for VMs. any assistance as to what I need to go through from a bash shell would be appreciated. thanks Simon

3 3

VM cant shutdown successfully,It's status always in the way to shutdown
by zhouhao＠vip.friendtimes.net 08 Sep '19

08 Sep '19

Sometimes on the engine website ,the vm's status always in the way to shutdown ,even if I wait for it for hours; It either failed or is shutting down and the "power off" cant shutdown the vm too. zhouhao(a)vip.friendtimes.net

2 2

Failure while import VM from export domain
by Timmi 08 Sep '19

08 Sep '19

Hi oVirt list, I'm planing to migrate my oVirt installation on a new HW. My current platform is running a 4.2.8. The new one a 4.3.5. I'm currently trying to import the VMs through the export domain. But some of my old VMs are failing. Which log file would be interesting to check? Also maybe there is a better way to copy more less all VMs from my current oVirt to the new one. Best regards Christoph

2 2

HP NetXen Incorporated NX3031 driver
by Leo David 07 Sep '19

07 Sep '19

Hi everyone, I have this bloody card installed on a node, and it seems that no driver can be loaded for it, "ip link sh" does not show it. Any recommendation about installing this network card on oVirt 4.2.8 ? lspci -v .... 05:00.0 Ethernet controller: NetXen Incorporated NX3031 Multifunction 1/10-Gigabit Server Adapter (rev 42) Subsystem: Hewlett-Packard Company NC522SFP Dual Port 10GbE Server Adapter Flags: fast devsel, IRQ 31 Memory at d9c00000 (64-bit, non-prefetchable) [size=2M] Memory at da000000 (64-bit, non-prefetchable) [size=32M] Expansion ROM at d8000000 [disabled] [size=64K] Capabilities: [40] MSI-X: Enable- Count=64 Masked- Capabilities: [80] Power Management version 3 Capabilities: [a0] MSI: Enable- Count=1/32 Maskable- 64bit+ Capabilities: [c0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number 59-69-46-61-6e-48-73-75 Kernel modules: netxen_nic 05:00.1 Ethernet controller: NetXen Incorporated NX3031 Multifunction 1/10-Gigabit Server Adapter (rev 42) Subsystem: Hewlett-Packard Company NC522SFP Dual Port 10GbE Server Adapter Flags: fast devsel, IRQ 33 Memory at d9e00000 (64-bit, non-prefetchable) [size=2M] Memory at dc000000 (64-bit, non-prefetchable) [size=32M] Capabilities: [40] MSI-X: Enable- Count=64 Masked- Capabilities: [80] Power Management version 3 Capabilities: [a0] MSI: Enable- Count=1/32 Maskable- 64bit+ Capabilities: [c0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number 59-69-46-61-6e-48-73-75 Kernel modules: netxen_nic dmesg | grep netxen [ 2.188078] netxen_nic 0000:05:00.0: 2MB memory map [ 2.188371] netxen_nic 0000:05:00.0: Timeout reached waiting for rom done [ 2.188442] netxen_nic 0000:05:00.0: Error getting board config info. [ 2.189488] netxen_nic: probe of 0000:05:00.0 failed with error -5 [ 2.190438] netxen_nic 0000:05:00.1: 2MB memory map [ 2.190741] netxen_nic 0000:05:00.1: Timeout reached waiting for rom done [ 2.190808] netxen_nic 0000:05:00.1: Error getting board config info. [ 2.190964] netxen_nic: probe of 0000:05:00.1 failed with error -5 ... Thank you very much ! Leo -- Best regards, Leo David

2 1

Windows server std 2019 64 bit support
by Alex K 06 Sep '19

06 Sep '19

Hi all, I am trying to find out if Windows server std 2019 64 bit is supported at ovirt 3.4. I have checked the following links: https://www.ovirt.org/documentation/vmm-guide/chap-Introduction.html https://access.redhat.com/articles/973133 https://www.windowsservercatalog.com/results.aspx?&bCatID=1521&cpID=24121&a… From the above I deduce that RHEV 4.3.5 supports it and ovirt does not include it in the supported list of guest OS. Also KVM on CentOS 7.7 seems to be supporting it as RHEL 7.7 is listed as supported platform. Have you tried to load Windows server std 2019 64 bit successfullyon ovirt 3.4? Thank you.

2 2

ovirt-guest: Network device hanging shortly after startup (after Upgrade to 4.3.5)
by julius.kempa＠astelon.ch 06 Sep '19

06 Sep '19

We have a some old guests (SLES 10.4) which has been worked corectly till 4.2.7 (Manager + Host) After Upgrade to 4.3.5, we have got a network issue, that the gues network device, not depending on used device type, stopts to work after some seconds.... after about 15-20 pings device is hanging. Sometimes, in the first time after the device hungs up, the message "no buffer space available" comes from ping. Does someone knows a solution for it? greetings Julius

3 3

[ANN] oVirt 4.3.6 Fifth Release Candidate is now available for testing
by Sandro Bonazzola 05 Sep '19

05 Sep '19

The oVirt Project is pleased to announce the availability of the oVirt 4.3.6 Fifth Release Candidate for testing, as of September 5th, 2019. This update is a release candidate of the sixth in a series of stabilization updates to the 4.3 series. This is pre-release software. This pre-release should not to be used in production. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8) This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8) * oVirt Node 4.3 (available for x86_64 only) has been built consuming CentOS 7.7 Candidate Release See the release notes [1] for known issues, new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Node is already available based on CentOS 7.7 Candidate Release Additional Resources: * Read more about the oVirt 4.3.6 release highlights: http://www.ovirt.org/release/4.3.6/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.6/ [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*

1 0

VM crushed and cant shutdown successfully,I shoud to reboot the ovirt-node machine
by zhouhao＠vip.friendtimes.net 05 Sep '19

05 Sep '19

VM crushed and cant shutdown successfully,It always on the way to shutdown，even if I wait it for 10 hours；Everytimes I shoud to reboot the ovirt-node machine This comes up 4 times, It appes both on the ovirt-noe 4.3 and 4.2; This bug appers when my VM is running at high load（seems memory and disk's w/r） My storage domain is local on host; When the bug appers,it could cost my node's io,looks like the picture below；But sometimes it will not The vm's threading on the ovirt-node, the IO ratio is 100% Everytime the vm's process will change to defunct I can not kill it,I had to shutdown the ovirt-node on the engine website ,the vm's status always in the way to shutdown ,even if I wait for it for hours; It either failed or is shutting down and the "power off" cant shutdown the vm too. the vm's error below The ovirt-node's error below ---------------------------------------------------------------- The other infomation about my ovirt-node node-version： node hardware zhouhao(a)vip.friendtimes.net

1 0

Re: [ANN] oVirt 4.3.6 Fourth Release Candidate is now available for testing
by Strahil 05 Sep '19

05 Sep '19

Hi Sandro, Can the update work with 7.6 ? I'm asking because CentOS 7.7 is still building and unavailable. Best Regards, Strahil NikolovOn Aug 29, 2019 10:47, Sandro Bonazzola <sbonazzo(a)redhat.com> wrote: > > The oVirt Project is pleased to announce the availability of the oVirt 4.3.6 Fourth Release Candidate for testing, as of August 29th, 2019. > > This update is a release candidate of the sixth in a series of stabilization updates to the 4.3 series. > This is pre-release software. This pre-release should not to be used in production. > > This release is available now on x86_64 architecture for: > * Red Hat Enterprise Linux 7.7 or later (but <8) > * CentOS Linux (or similar) 7.7 or later (but <8) > > This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: > * Red Hat Enterprise Linux 7.7 or later (but <8) > * CentOS Linux (or similar) 7.7 or later (but <8) > * oVirt Node 4.3 (available for x86_64 only) will be made available when CentOS 7.7 will be released. > > See the release notes [1] for known issues, new features and bugs fixed. > > Notes: > - oVirt Appliance is already available > - oVirt Node is not yet available, pending CentOS 7.7 release to be available > > Additional Resources: > * Read more about the oVirt 4.3.6 release highlights: http://www.ovirt.org/release/4.3.6/ > * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt > * Check out the latest project news on the oVirt blog:http://www.ovirt.org/blog/ > > [1] http://www.ovirt.org/release/4.3.6/ > [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ > > -- > > Sandro Bonazzola > > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV > > Red Hat EMEA > > sbonazzo(a)redhat.com > > Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.

2 1