- Users - oVirt List Archives

EVENT_ID not generated for VM Reboot
by Sigbjorn Lie-Soland 08 May '19

08 May '19

Hi list, When a user powers down a VM from within the VM operating system (poweroff), a "moved from 'Up' --> 'Down'" message is written to engine.log, and a EVENT_ID: VM_DOWN is created -- 2019-05-08 20:53:03,495+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (ForkJoinPool-1-worker-3) [] VM 'xxxxxxxx-3966-4da2-a505-xxxxxxxxxxxx'(vmname1) moved from 'Up' --> 'Down' 2019-05-08 20:53:03,550+02 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-3) [] EVENT_ID: VM_DOWN(61), VM vmname1 is down. Exit message: User shut down from within the guest -- When a user starts a VM from the webadmin, a "moved from 'WaitForLaunch' --> 'PoweringUp'" and "'PoweringUp' --> 'Up'" is written to engine.log, and the events EVENT_ID: USER_STARTED_VM and EVENT_ID: USER_RUN_VM is created. -- 2019-05-08 20:53:20,976+02 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-1388598) [xxxxxxxx-da2d-452d-a604-xxxxxxxxxxxx] EVENT_ID: USER_STARTED_VM(153), VM vmname1 was started by adminuser@ipadomain (Host: hypervisor1). 2019-05-08 20:53:24,091+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (ForkJoinPool-1-worker-3) [] VM 'xxxxxxxx-3966-4da2-a505-xxxxxxxxxxxx'(vmname1) moved from 'WaitForLaunch' --> 'PoweringUp' 2019-05-08 20:53:45,140+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (ForkJoinPool-1-worker-3) [] VM 'xxxxxxxx-3966-4da2-a505-xxxxxxxxxxxx'(vmname1) moved from 'PoweringUp' --> 'Up' 2019-05-08 20:53:45,238+02 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-3) [] EVENT_ID: USER_RUN_VM(32), VM vmname1 started on Host hypervisor1 -- However when a user reboots a VM from within the VM operating system, the messages "moved from 'Up' --> 'RebootInProgress'" and "moved from 'RebootInProgress' --> 'Up'" is written to the engine.log, but no EVENT_ID is generated. -- -- 2019-05-08 20:52:27,367+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (ForkJoinPool-1-worker-1) [] VM 'xxxxxxxx-3966-4da2-a505-xxxxxxxxxxxx'(vmname1) moved from 'Up' --> 'RebootInProgress' 2019-05-08 20:52:49,926+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (ForkJoinPool-1-worker-1) [] VM 'xxxxxxxx-3966-4da2-a505-xxxxxxxxxxxx'(vmname1) moved from 'RebootInProgress' --> 'Up' -- So systems like CloudForms/ManageIQ which reads the manager event log via the manager REST API is not notified when a VM is rebooted, and is therefore unable to perform any EmsEvent when the VM reboots. Why is there no EVENT_ID generated when a VM reboots? Is it possible to enable EVENT_ID's to be created for VM reboot events? Regards, Siggi

1 0

[Urgent] USB passthrough
by Juan Pablo Lorier 08 May '19

08 May '19

Hi, I'm trying to attach an USB device to a VM but although the host detects the USB device (is shown in lsusb), the host device tab in the VM is not showing that device. It show all other but not that one. Is there something I should do to update ovrit host devices? Regards

1 0

Re: Creating Thin-provisioned disks on a gluster volume
by Strahil 08 May '19

08 May '19

I have already opened a bug for that. If you are not in a hurry - postpone the migration. Best Regards, Strahil NikolovOn May 8, 2019 00:49, Dmitry Filonov <filonov(a)hkl.hms.harvard.edu> wrote: > > Hi - > We want to migrate our aging oVirt cluster to a new one and decided to go for the hyperconverged setup with Gluster and hosted engine. Got 3 new machines, set everything up, did a test VM migration and were almost ready to do final migration of our VMs when I notice one really weird thing. > When migrating VMs from NFS storage onto Gluster they stay thin provisioned. But if I try creating new disk image from the oVirt GUI - I get preallocated volume. No matter if I select "thin provision" or "Preallocated" I always get preallocated volume created. > > The engine.log says - > 2019-05-07 17:14:20,562-04 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.CreateImageVDSCommand] (default task-20) [bbd94792-2f86-44eb-9334-807dd44d0742] START, CreateImageVDSCommand( CreateImageVDSCommandParameters:{storagePoolId='43550c2c-7100-11e9-9b45-00163e4babb7', ignoreFailoverLimit='false', storageDomainId='1de2f7ac-ee52-43fb-89ac-f86b62f73b9a', imageGroupId='86c5c5e9-6533-4caf-a5a5-401556a5059a', imageSizeInBytes='21474836480', volumeFormat='RAW', newImageId='470b8035-9380-408d-a644-96e8d74c4e8e', imageType='Preallocated', newImageDescription='{"DiskAlias":"test","DiskDescription":""}', imageInitialSizeInBytes='0'}), log id: 228ddfd5 > > Is there any tweak I didn't notice to make things actually what it suppose to be doing? > > oVirt 4.3.3.5-1.el7 > glusterfs 5.5-1.el7 > CentOS Linux release 7.6.1810 > > Thank you! > > -- > Dmitry Filonov > Linux Administrator > SBGrid Core | Harvard Medical School > 250 Longwood Ave, SGM-114 > Boston, MA 02115

1 0

Best arquitecture for 2 location
by raul.caballero.girol＠gmail.com 08 May '19

08 May '19

Hi everybody, I have 2 location separate geographically. I want to deploy an ovirt installation. Evary location has 3 host with a storage system. What is the best arquitecture for this scenario?. My problem is that I don know how to recover the manager if its storage is down. With a backup/recover? How I remove the old manager when I recover the storage? Cheers

2 4

Creating Thin-provisioned disks on a gluster volume
by Dmitry Filonov 08 May '19

08 May '19

Hi - We want to migrate our aging oVirt cluster to a new one and decided to go for the hyperconverged setup with Gluster and hosted engine. Got 3 new machines, set everything up, did a test VM migration and were almost ready to do final migration of our VMs when I notice one really weird thing. When migrating VMs from NFS storage onto Gluster they stay thin provisioned. But if I try creating new disk image from the oVirt GUI - I get preallocated volume. No matter if I select "thin provision" or "Preallocated" I always get preallocated volume created. The engine.log says - 2019-05-07 17:14:20,562-04 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.CreateImageVDSCommand] (default task-20) [bbd94792-2f86-44eb-9334-807dd44d0742] START, CreateImageVDSCommand( CreateImageVDSCommandParameters:{storagePoolId='43550c2c-7100-11e9-9b45-00163e4babb7', ignoreFailoverLimit='false', storageDomainId='1de2f7ac-ee52-43fb-89ac-f86b62f73b9a', imageGroupId='86c5c5e9-6533-4caf-a5a5-401556a5059a', imageSizeInBytes='21474836480', volumeFormat='RAW', newImageId='470b8035-9380-408d-a644-96e8d74c4e8e',* imageType='Preallocated', *newImageDescription='{"DiskAlias":"test","DiskDescription":""}', imageInitialSizeInBytes='0'}), log id: 228ddfd5 Is there any tweak I didn't notice to make things actually what it suppose to be doing? oVirt 4.3.3.5-1.el7 glusterfs 5.5-1.el7 CentOS Linux release 7.6.1810 Thank you! -- Dmitry Filonov Linux Administrator SBGrid Core | Harvard Medical School 250 Longwood Ave, SGM-114 Boston, MA 02115

2 2

Hosted engine restore went very wrong
by Andreas Elvers 07 May '19

07 May '19

I really feel like an idiot. I tried to move our hosted engine from our Default datacenter to our Ceph Datacenter. I ran intro problems which were correctly addressed. see: https://lists.ovirt.org/archives/list/users@ovirt.org/thread/ZFCLFWRN6XR6KM… It was in case a race condition. I was able to bring back the engine to our Default Cluster. And then I tried to do the move again to our Ceph Datacenter. I got the error "The target Data Center does not contain the Virtual Disk" twice yesterday. Because it was late, I decided to do it in the next morning. I did a new backup from the engine. Copied it over to the new node of the Ceph Datacenter and started the hosted-engine --deploy. But I FORGET TO SHUTDOWN the other engine! Oh man. The deploy script errored out with: [ ERROR ] fatal: [localhost]: FAILED! => {"censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false} [ ERROR ] fatal: [localhost -> engine.infra.solutions.work]: FAILED! => {"changed": false, "msg": "There was a failure deploying the engine on the local engine VM. The system may not be provisioned accord Then I realised something was different this time. I shutdown and undefined the Local Engine. The node is now in a degraded state. Is it possible to start the deployment again on a degraded node? I started the old engine again, but I'm not able to reach the login page. Any Idea what to do next?

1 5

Re: All Windows vms report "Actual timezone in guest doesn't match configuration"
by michael＠wanderingmad.com 07 May '19

07 May '19

I got my questions mixed up, restarting guest services does nothing.

6 9

vm_dynamic table very big in ovirt engine db
by Nardus Geldenhuys 07 May '19

07 May '19

Hi There Hope you are well. We have two clusters with two ovirt-engines. On the one cluster's ovirt -engine the vm_dynamic tables is almost 3.5 GB big, is that normal ? We are on the latest engine software. Regards Nar

1 0

Host has available update for ovirt-host, but nothing found
by Gianluca Cecchi 07 May '19

07 May '19

I have 4.3.3 on engine and hosts in 4.3.3 with plain CentOS, updated from 4.3.2 on 2/5. Since the day after, 3/5, I get the event Check for available updates on host ov200 was completed successfully with message 'found updates for packages ovirt-host'. and also the icon at side of host in web admin gui. But: [root@ov200 ~]# yum update Loaded plugins: fastestmirror, langpacks, product-id, search-disabled-repos, subscription-manager, : vdsmupgrade This system is not registered with an entitlement server. You can use subscription-manager to register. Repository centos-sclo-rh-release is listed more than once in the configuration Loading mirror speeds from cached hostfile * base: centos.mirror.garr.it * epel-util: epel.besthosting.ua * extras: centos.mirror.garr.it * ovirt-4.3: ftp.nluug.nl * ovirt-4.3-epel: epel.besthosting.ua * updates: centos.mirror.garr.it No packages marked for update [root@ov200 ~]# [root@ov200 ~]# rpm -q ovirt-host package ovirt-host is not installed [root@ov200 ~]# yum search ovirt-host: ===================================== N/S matched: ovirt-host ====================================== ovirt-host-deploy-common.noarch : Commong files for ovirt-host-deploy ovirt-host-deploy-java.noarch : ovirt-host-deploy java support ovirt-host-deploy-javadoc.noarch : Javadocs for ovirt-host-deploy ovirt-host.x86_64 : Track required packages for oVirt hosts ovirt-host-dependencies.x86_64 : This meta package pulls in all the dependencies needed for minimal : oVirt hosts. ovirt-hosted-engine-ha.noarch : oVirt Hosted Engine High Availability Manager ovirt-hosted-engine-setup.noarch : oVirt Hosted Engine setup tool python2-ovirt-host-deploy.noarch : oVirt host deploy tool This is not an oVirt-NG host, but plain CentOS.... What to do? Do I have to install the ovirt-host package anyway? Thanks in advance, Gianluca

2 4

silent install failing in 4.3.3.5-1 due to question on fqdn of host
by Brian Kircher 07 May '19

07 May '19

Anyone happen to know if I can get the following into an answer file for a silent deployment? It’s asking to confirm or change from the fqdn of the host doing the HE install. Default is fine, but I have to connect in to the screen to answer this before it will continue. Default hostname changed to generic in below log. Forward and reverse are both working via dns. QUESTION/1/OVESETUP_NETWORK_FQDN_first_HE 019-04-30 18:56:38,802-0500 DEBUG otopi.context context.dumpEnvironment:745 ENVIRONMENT DUMP - END 2019-04-30 18:56:38,804-0500 DEBUG otopi.context context._executeMethod:127 Stage validation METHOD otopi.plugins.gr_he_common.network<http://otopi.plugins.gr_he_common.network> .bridge.Plugin._validate_hostname_first_host 2019-04-30 18:56:38,806-0500 DEBUG otopi.plugins.gr_he_common.network<http://otopi.plugins.gr_he_common.network> .bridge dialog.queryEnvKey:90 queryEnvKey called for key OVEHOSTED_NETWORK/host_name 2019-04-30 18:56:38,806-0500 DEBUG otopi.plugins.otopi.dialog.human human.queryString:159 query OVESETUP_NETWORK_FQDN_first_HE 2019-04-30 18:56:38,807-0500 DEBUG otopi.plugins.otopi.dialog.human dialog.__logString:204 DIALOG:SEND Please provide the hostname of this host on the management network [ host01.domain.com<http://host01.domain.com> ]: Version 4.3.3.5<http://4.3.3.5>-1.el7 Thanks, Brian ________________________________ This email and any files transmitted with it are confidential and are intended solely for the use of the individual or entity to whom they are addressed. If you are not the original recipient or the person responsible for delivering the email to the intended recipient, be advised that you have received this email in error, and that any use, dissemination, forwarding, printing, or copying of this email is strictly prohibited. If you received this email in error, please immediately notify the sender and delete the original.

3 4