- Users - oVirt List Archives

Gluster version on oVirt 4.3.0
by suporte＠logicworks.pt 07 Feb '19

07 Feb '19

Hi, What Glusterfs version should I use with oVirt 4.3.0 ? Thanks -- Jose Ferradeira http://www.logicworks.pt

3 2

oVirt + GlusterFS over FCoE
by Николаев Алексей 07 Feb '19

07 Feb '19

1 0

upgrade bug
by ada per 07 Feb '19

07 Feb '19

After upgrading my hosts from 4.2.7.1 to 4.2.8 the external networks stopped working! When im starting a VM using external network it does not boot up at all!!!!! The error message is: "VM is down with error. Exit message: unsupported configuration: filterref is not supported for network interfaces with virtualport type openvswitch" I rolled it back to 4.2.7.1 for 1 of my hosts just as a test and the VMs on that host can now bootup using external networks as they are supposed to!! Please advice as i would like to use the upgrade!!!

2 5

"Volume Option cluster.granular-entry-heal=enable could not be set" when using "Optimize for Virt store"
by Jorick Astrego 07 Feb '19

07 Feb '19

Hi again, When using the option "Optimize for Virt store", I get the following error: 2019-02-06 10:25:02,353+01 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-15727) [051cfc8c-9efc-427c-9e2e-9127e3e0a86d] EVENT_ID: GLUSTER_VOLUME_OPTION_SET_FAILED(4,003), Volume Option cluster.granular-entry-heal=enable could not be set on ssd9 of cluster GlusterFS-storage. This looks like the same issue as https://bugzilla.redhat.com/show_bug.cgi?id=1635684 Volume set option 'granular-entry-heal' is not longer set via gluster volume set option. Is this a known issue or should I open a bug for this? Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts ---------------- Tel: 053 20 30 270 info(a)netbulae.eu Staalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ----------------

2 1

ovirt-node 4.3 hyperconverged - fails on VM deployment - all nodes broken
by feral 07 Feb '19

07 Feb '19

Boring 3 vanilla node deployment. Default options except for gluster volume size. All three nodes on static IP on LAN. All three have each other listed in /etc/hosts as well as dns. Gluster wizard complete successfully, deploy VM. VM deployment fails after copying to the gluster storage. At that point, rebooting any node results in node not coming back to life. No networking, so no other services. Only error I can get is to check the engine.log, which I cannot do as the engine fails to come up. Anyone else seeing this with a vanilla install/deployment? -- _____ Fact: 1. Ninjas are mammals. 2. Ninjas fight ALL the time. 3. The purpose of the ninja is to flip out and kill people.

1 0

ovirt-node 4.2 iso - hyperconverged wizard doesn't write gdeployConfig settings
by feral 07 Feb '19

07 Feb '19

New install of ovirt-node 4.2 (from iso). Setup each node with networking and ssh keys, and use the hyperconverged gluster deployment wizard. None of the user specified settings are ever reflected in the gdeployConfig.conf. Anyone running into this? -- _____ Fact: 1. Ninjas are mammals. 2. Ninjas fight ALL the time. 3. The purpose of the ninja is to flip out and kill people.

7 12

performance issues with Windows 10
by Hetz Ben Hamo 07 Feb '19

07 Feb '19

Hi, I'm doing some very simple disk benchmarks on Windows 10, both with ESXI 6.7 and oVirt 4.3.0. Both Windows 10 Pro guests have all the driver installed. the "Storage" (Datastore in VMWare and storage domains in oVirt) comes from the same ZFS machine, both mounted as NFS *without* any parameters for NFS mount. The ESXI is running on HP DL360 G7 with E5620 CPU, while the oVirt node is running on IBM X3550 M3 with dual Xeon E5620. There are no memory issues as both machines have plenty of free memory and free CPU resources. Screenshots: - Windows 10 in vSphere 6.7 - https://imgur.com/V75ep2n - Windows 10 in oVirt 4.3.0 - https://imgur.com/3JDrWLx As you can see, while oVirt lags a bit in 4K Read, the write performance is really bad. How can this be improved? Thanks

2 1

Re: ovirt 4.2.7 -> 4.3.0 upgrade process
by Douglas Duckworth 06 Feb '19

06 Feb '19

Thanks everyone! We will try the upgrade to 4.2.8 then try 4.3 later. Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit<https://scu.med.cornell.edu> Weill Cornell Medicine 1300 York Avenue New York, NY 10065 E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> O: 212-746-6305 F: 212-746-8690 On Wed, Feb 6, 2019 at 11:56 AM Sandro Bonazzola <sbonazzo(a)redhat.com<mailto:sbonazzo@redhat.com>> wrote: Il giorno mer 6 feb 2019 alle ore 17:28 Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu>> ha scritto: Hello Can anyone confirm that the steps for upgrading to 4.3 from 4.2 are the same as listed for previous versions? I reviewed 4.1 to 4.2 which looks straight forward: https://www.ovirt.org/documentation/upgrade-guide/chap-Upgrading_from_4.1_t…<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ovirt.org_document…> I am sure nothing will go wrong though we are doing daily backups of the hosted engine VM database. If you are on 4.2.7 I would recommend upgrade the engine to 4.2.8 before upgrading to 4.3. Since in 4.3 we switched from fluentd to rsyslog for the metrics part, with 4.2.7 you may have some issue if you upgrade hosts to 4.3 before the engine gets upgraded. Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit<https://scu.med.cornell.edu> Weill Cornell Medicine 1300 York Avenue New York, NY 10065 E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> O: 212-746-6305 F: 212-746-8690 _______________________________________________ Users mailing list -- users(a)ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to users-leave(a)ovirt.org<mailto:users-leave@ovirt.org> Privacy Statement: https://www.ovirt.org/site/privacy-policy/<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ovirt.org_site_pri…> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ovirt.org_communit…> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/VC2TVZIHTOTMZ…<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.ovirt.org_archiv…> -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.redhat.com_&d=DwMF…> sbonazzo(a)redhat.com<mailto:sbonazzo@redhat.com> [https://www.redhat.com/files/brand/email/sig-redhat.png]<https://urldefense.proofpoint.com/v2/url?u=https-3A__red.ht_sig&d=DwMFaQ&c=…>

1 0

sun.security.validator
by suporte＠logicworks.pt 06 Feb '19

06 Feb '19

Hi, I'm running Version 4.2.3.8-1.el7, and after reboot the engine machine no longer could login into administration portal with this error: sun.security.validator.ValidatorException: PKIX path validation faile java.security.cert.CertPathValidatorException: validity check failed I'm using a self signed cert. Any idea? Thanks -- Jose Ferradeira http://www.logicworks.pt

5 5

ovirt 4.2.7 -> 4.3.0 upgrade process
by Douglas Duckworth 06 Feb '19

06 Feb '19

Hello Can anyone confirm that the steps for upgrading to 4.3 from 4.2 are the same as listed for previous versions? I reviewed 4.1 to 4.2 which looks straight forward: https://www.ovirt.org/documentation/upgrade-guide/chap-Upgrading_from_4.1_t… I am sure nothing will go wrong though we are doing daily backups of the hosted engine VM database. Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit<https://scu.med.cornell.edu> Weill Cornell Medicine 1300 York Avenue New York, NY 10065 E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> O: 212-746-6305 F: 212-746-8690

5 5