- Users - oVirt List Archives

Memory usage is inaccurate on ovirt web manager.
by patrickstar12358＠hotmail.com 13 Nov '18

13 Nov '18

Hi buddy,I encoutered a issue: Enviroment:ovirt 3.5,node2+node3+engine,node2 and node3 are in the same cluster. node2:64GB memory node3:64GB memory If I try to start 25 VMs on node2,node2's Memory usage is almost up to 80% But if I start 25 VMs on node3,node3's Memory usage is normal,about 70% VMs are all the same. And I checked out "Hosts>General". on node2: Physical Memory:64301 MB total, 49512 MB used, 14789 MB free Swap Size:28567 MB total, -858090 MB used, 886657 MB free Shared Memory:57% Max free Memory for scheduling new VMs:24191 MB Memory Page Sharing:Active on node3: Physical Memory:64301 MB total, 37938 MB used, 26363 MB free Swap Size:28567 MB total, 161 MB used, 28406 MB free Shared Memory:98% Max free Memory for scheduling new VMs:24191 MB Memory Page Sharing:Active Best regard

3 2

Can I Move a Fiber Channel Domain between different environments?
by Jacob Green 13 Nov '18

13 Nov '18

We have two Ovirt environments, our existing environment is Ovirt 4.1 And we want to migrate to our 4.2 environment, we chose this path because upgrading had a lot of issues for us, also we are migrating our cluster environment to a new IP scheme. So this made the most sense to us. The question we have now is can we simply move an existing Fiber Channel domain from our Ovirt 4.1 environment to our 4.2 environment. I see information here that suggests we can, https://ovirt.org/documentation/admin-guide/chap-Storage/ however there is information further down in the document that seems conflicting or I am confused, I am willing to accept that. *Near the top of the page I linked it says the following* "Note:The export storage domain is deprecated. Storage data domains can be unattached from a data center and imported to another data center in the same environment, or in a different environment. Virtual machines, floating virtual disk images, and templates can then be uploaded from the imported storage domain to the attached data center. SeeImporting Existing Storage Domains <https://ovirt.org/documentation/admin-guide/chap-Storage/sect-Importing_Exi…>for information on importing storage domains." **Ok cool so I should be able to import the storage domain into a new environment? According to that information it would seem so.* * *However further down it says the following,* "Reusing LUNs LUNs cannot be reused, as is, to create a storage domain or virtual disk. If you try to reuse the LUNs, the Administration Portal displays the following error message:" So I do not want to make a mistake, and remove my storage domain from my original ovirt environment just to find I cannot re add it to the new ovirt environment, and if I do that will I be able to import the VMs? Thank you for any guidance on this topic, It would be much appreciated. I guess the TLDR would be is the part pasted below of the linked documentation accurate for fiber channel? "Data Importing an existing data storage domain allows you to access all of the virtual machines and templates that the data storage domain contains. After you import the storage domain, you must manually import virtual machines, floating disk images, and templates into the destination data center. The process for importing the virtual machines and templates that a data storage domain contains is similar to that for an export storage domain. However, because data storage domains contain all the virtual machines and templates in a given data center, importing data storage domains is recommended for data recovery or large-scale migration of virtual machines between data centers or environments. Important: You can import existing data storage domains that were attached to data centers with a compatibility level of 3.5 or higher." Please forgive my confusion. -- Jacob Green Systems Admin American Alloy Steel 713-300-5690

1 0

Re: Ovirt Python - SDK
by Hari Prasanth Loganathan 13 Nov '18

13 Nov '18

Hi Brad, ovirt-engine-sdk-python 4.2.9 It is running in the non-ovirt environment. No Ovirt Packages are installed in this. Thanks, Hari On Tue, 13 Nov 2018 at 2:50 AM, Brad Riemann <Brad.Riemann(a)cloud5.com> wrote: > What version of the sdk are you using? Are you running this on an > non-ovirt server/workstation? Can you list out the packages installed for * > *ovirt** ? > > > > Brad Riemann > > Sr. System Architect > > Cloud5 Communications > > Brad.Riemann(a)Cloud5.com > -- DISCLAIMER - *MSysTechnologies LLC* This email message, contents and its attachments may contain confidential, proprietary or legally privileged information and is intended solely for the use of the individual or entity to whom it is actually intended. If you have erroneously received this message, please permanently delete it immediately and notify the sender. If you are not the intended recipient of the email message,you are notified strictly not to disseminate,distribute or copy this e-mail.E-mail transmission cannot be guaranteed to be secure or error-free as Information could be intercepted, corrupted, lost, destroyed, incomplete or contain viruses and MSysTechnologies LLC accepts no liability for the contents and integrity of this mail or for any damage caused by the limitations of the e-mail transmission.

2 3

updating Spacewalk registered Enterprise hosts to 4.2.7
by Matthias Leopold 13 Nov '18

13 Nov '18

Hi, just for the records: I couldn't update my Spacewalk (2.6) registered Enterprise (CentOS) hosts from oVirt 4.2.6 to 4.2.7. Error message is 2018-11-05 15:03:51,059 p=2329 u=ovirt | Using /usr/share/ovirt-engine/playbooks/ansible.cfg as config file 2018-11-05 15:03:52,152 passlib.registry registered 'md5_crypt' handler: <class 'passlib.handlers.md5_crypt.md5_crypt'> 2018-11-05 15:03:52,165 p=2329 u=ovirt | PLAY [all] ********************************************************************* 2018-11-05 15:03:52,184 p=2329 u=ovirt | TASK [ovirt-host-upgrade : Install ovirt-host package if it isn't installed] *** 2018-11-05 15:04:00,078 p=2329 u=ovirt | fatal: [foo.bar.meduniwien.ac.at]: FAILED! => { "ansible_facts": { "pkg_mgr": "yum" }, "changed": false } MSG: Error from repoquery: ['/usr/bin/repoquery', '--show-duplicates', '--plugins', '--quiet', '-c', None, '--disablerepo', '', '--enablerepo', '', '--qf', '%{epoch}:%{name}-%{version}-%{release}.%{arch}', 'ovirt-host']: Error accessing file for config file:///root/--disablerepo Error accessing file for config file:///root/--disablerepo Since this is only a test environment and i could easily switch the hosts to upstream repo mirrors I didn't do any further debugging. Maybe the Spacewalk server is too old... Matthias

2 2

vdsmd.service stuck in state: activating
by sceglimilano＠gmail.com 13 Nov '18

13 Nov '18

= Noob questions = A) First time here. I couldn't find the rulebook/netiquette for oVirt mailing list, could you give me a link? B) What do you use here, top or bottom posting? C) Which is the line length limit? I've written this email manually entering new line after 80 chars, is it fine? D) Which is the log length limit? E) When should I use pastebin or similar websites? = /Noob questions = = Issue questions = TL;DR self host engine deployment fails, vdsmd.service has this error I can't find on Google: 'sysctl: cannot stat /proc/sys/ssl: No such file or directory' Long description: I've been trying for a while to deploy an oVirt self hosted engine but it failed all the time. After every failed deployment, node status resulted in 'FAIL' (or 'DEGRADED', I don't remember) and to restore it to 'OK' status I'd to run 'vdsm-tool configure --force'. vdsm-tool configuration never went through fully successful: < code > abrt is not configured for vdsm lvm is configured for vdsm libvirt is not configured for vdsm yet FAILED: conflicting vdsm and libvirt-qemu tls configuration. vdsm.conf with ssl=True requires the following changes: libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1 qemu.conf: spice_tls=1. Current revision of multipath.conf detected, preserving < /code > I set 'auth_tcp = "sasl"' (in "/etc/libvirtd.conf") and 'spice_tls=1' (in "/etc/libvirt/qemu.conf") and restart vdsdmd.service, but it still fails: < code > Starting Virtual Desktop Server Manager... _init_common.sh[2839]: vdsm: Running mkdirs _init_common.sh[2839]: vdsm: Running configure_coredump _init_common.sh[2839]: vdsm: Running configure_vdsm_logs _init_common.sh[2839]: vdsm: Running wait_for_network _init_common.sh[2839]: vdsm: Running run_init_hooks _init_common.sh[2839]: vdsm: Running check_is_configured _init_common.sh[2839]: abrt is already configured for vdsm _init_common.sh[2839]: lvm is configured for vdsm _init_common.sh[2839]: libvirt is already configured for vdsm _init_common.sh[2839]: Current revision of multipath.conf detected, preserving _init_common.sh[2839]: vdsm: Running validate_configuration _init_common.sh[2839]: SUCCESS: ssl configured to true. No conflicts _init_common.sh[2839]: vdsm: Running prepare_transient_repository _init_common.sh[2839]: vdsm: Running syslog_available _init_common.sh[2839]: vdsm: Running nwfilter _init_common.sh[2839]: vdsm: Running dummybr _init_common.sh[2839]: vdsm: Running tune_system _init_common.sh[2839]: sysctl: cannot stat /proc/sys/ssl: No such file or directory md[1]: vdsmd.service: control process exited, code=exited status=1 md[1]: Failed to start Virtual Desktop Server Manager. md[1]: Unit vdsmd.service entered failed state. md[1]: vdsmd.service failed. md[1]: vdsmd.service holdoff time over, scheduling restart. < /code > I've no idea about how to investigate, solve or troubleshoot this issue. I've updated yesterday to the last version but nothing changed: ovirt-release-master-4.3.0-0.1.master.20180820000052.gitdd598f0.el7.noarch = /Issue questions =

4 8

Networking - How to pass all vlan (trunk) to a guest VM?
by Jonathan Greg 13 Nov '18

13 Nov '18

Hi, I didn't find the documentation about it... How I can pass all the vlan (trunk) to a guest VM (without SR-IOV)? My switch is configured to trunk all vlans. I do have configured a logical network with the "Enable VLAN tagging" box uncheck and assign it to a VM. My understanding with this setting is that tagged and untagged packet should be forwarded to the VM guest. Unfortunately it doesn't work at all, if I run a tcpdump on the VM nic attached to this logical network, I don't see anything... I would really like to run a virtual router or firewall on my setup without having to shutdown my VM and having attach a new vnic each time I want to add a new vlan. Any idea? Jonathan

3 5

purchase linkedin endorsements
by http://buylinkedin.com/ patil 13 Nov '18

13 Nov '18

Linkedin online place where you can connect with people you have met in professional circumstances and keep up to date with their activities in a manner similar to other social networks such as Facebook.

1 0

Re: storage healing question
by Ravishankar N 12 Nov '18

12 Nov '18

Hi, Can you restart the self-heal daemon by doing a `gluster volume start bgl-vms-gfs force` and then launch the heal again? If you are seeing different entries and counts each time you run heal info, there is likely a network issue (disconnect) between the (gluster fuse?) mount and the bricks of the volume leading to pending heals. Also, there was a bug in arbiter volumes[1] that got fixed in glusterfs 3.12.15. It can cause VMs to pause when you reboot the arbiter node, so it is recommended to upgrade to this gluster version. HTH, Ravi [1] https://bugzilla.redhat.com/show_bug.cgi?id=1637989 > From: Dev Ops<sipandbite(a)hotmail.com> > Date: Mon, Nov 12, 2018 at 1:09 PM > Subject: [ovirt-users] Re: storage healing question > To:<users(a)ovirt.org> > > > Any help would be appreciated. I have since rebooted the 3rd gluster > node which is the arbiter. This doesn't seem to want to heal. > > gluster volume heal bgl-vms-gfs info |grep Number > Number of entries: 68 > Number of entries: 0 > Number of entries: 68 > _______________________________________________ > Users mailing list --users(a)ovirt.org > To unsubscribe send an email tousers-leave(a)ovirt.org > Privacy Statement:https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives:https://lists.ovirt.org/archives/list/users@ovirt.org/message/XNHA…

1 0

New disks cloned from template get wrong quota-id, when quota is disabled on DC
by Florian Schmid 12 Nov '18

12 Nov '18

Hi, we have recently upgraded our ovirt environment from 4.1.6 to 4.1.9 and then to 4.2.5. I don't know exactly when this issue was happened the first time, because on the affected DCs, we haven't created new VMs for some time ago. To our setup: We have several DCs configured and only the former default one has quota enabled. We have separate templates for each DC and they haven't been cloned or anything else from a template in default DC When I now create a VM on DC from a template (disks are cloned), where quota is not enabled, the new disks are getting quotas assigned, which are not available in that DC! The template disks all have the correct quota ID assigned! Example from engine DB: select * from image_storage_domain_map where storage_domain_id = '73caedd0-6ef3-46e0-a705-fe268f04f9cc'; -> ... a50b46ce-e350-40a4-8f00-968529777446 | 73caedd0-6ef3-46e0-a705-fe268f04f9cc | 58ab004a-0315-00d0-02b8-00000000011d | 4a7a0fea-9bc4-4c3a-b3f4-0e8444641ea3 1cd8f9d9-e2b5-4dec-aa3b-ade2612ed3e7 | 73caedd0-6ef3-46e0-a705-fe268f04f9cc | 58ab004a-009a-00ea-031c-000000000182 | 4a7a0fea-9bc4-4c3a-b3f4-0e8444641ea3 2f982856-7afa-4f18-a676-fe2cc44b14d6 | 73caedd0-6ef3-46e0-a705-fe268f04f9cc | 58ab004a-009a-00ea-031c-000000000182 | 4a7a0fea-9bc4-4c3a-b3f4-0e8444641ea3 ... -> ll ./6d979004-cb4c-468e-b89a-a292407abafb/ insgesamt 1420 -rw-rw----. 1 vdsm kvm 1073741824 Nov 6 15:46 a50b46ce-e350-40a4-8f00-968529777446 -rw-rw----. 1 vdsm kvm 1048576 Nov 6 15:46 a50b46ce-e350-40a4-8f00-968529777446.lease -rw-r--r--. 1 vdsm kvm 271 Nov 6 15:46 a50b46ce-e350-40a4-8f00-968529777446.meta As you see, the disk a50b46ce-e350-40a4-8f00-968529777446 was created some minutes ago, but it has a different default quota ID assigned as the other disks above. 58ab004a-0315-00d0-02b8-00000000011d instead of 58ab004a-009a-00ea-031c-000000000182 select * from quota; id | storage_pool_id | quota_name | description | _create_date | _update_date | threshold_cluster_percent age | threshold_storage_percentage | grace_cluster_percentage | grace_storage_percentage | is_default --------------------------------------+--------------------------------------+------------+-------------------------+-------------------------------+-------------------------------+-------------------------- ----+------------------------------+--------------------------+--------------------------+------------ 58ab004a-0315-00d0-02b8-00000000011d | 00000001-0001-0001-0001-000000000089 | Default | Default unlimited quota | 2017-02-20 14:42:18.967236+00 | | 80 | 80 | 20 | 20 | t 58ab004a-009a-00ea-031c-000000000182 | 5507b0a6-9170-4f42-90a7-80d22d4238c6 | Default | Default unlimited quota | 2017-02-20 14:42:18.967236+00 | | 80 | 80 | 20 | 20 | t As you see here, both quota IDs are default IDs and therefore can't be on the same DC or storage domain. As soon I enable quota on that DC, new disks created by VM creation via template, will get the correct quota ID. The problem with wrong IDs is, that you can't edit the disks anymore! I can repeat that error every time and I can give all the information you need to debug this. Pleas inform me, what data do you need... Best Regards Florian

2 2

storage healing question
by Dev Ops 12 Nov '18

12 Nov '18

The switches above our environment had some VPC issues and the port channels went offline. The ports that had issues belonged to 2 of the gfs nodes in our environment. We have 3 storage nodes total with the 3rd being the arbiter. I wound up rebooting the first 2 nodes and everything came back happy. After a few hours I noticed that the storage was up but complaining about being out of sync and needing healing. Within the hour I noticed a VM had paused itself due to storage issues. This is a small environment, for now, with only 30 VM's. I am new to Ovirt so this is uncharted territory for me. I am tailing some logs and things look sort of normal and google is sending me down a wormhole. If I run "gluster volume heal cps-vms-gfs info" this number seems to be changing pretty regularly. Logs are showing lots of entries like this: [2018-11-08 21:55:05.996675] I [MSGID: 114047] [client-handshake.c:1242:client_setvolume_cbk] 0-cps-vms-gfs-client-1: Server and Client lk-version numbers are not same, reopening the fds [2018-11-08 21:55:05.997693] I [MSGID: 108002] [afr-common.c:5312:afr_notify] 0-cps-vms-gfs-replicate-0: Client-quorum is met [2018-11-08 21:55:05.997717] I [MSGID: 114035] [client-handshake.c:202:client_set_lk_version_cbk] 0-cps-vms-gfs-client-1: Server lk version = 1 I guess I am curious what else should I be looking for? Is this just taking forever to heal? Is there something else I can run or I should do to verify things are actually getting better? I ran an actual heal command and it cleared everything for a few seconds and then the entries started to populate again when I did the info command. [root@cps-vms-gfs01 glusterfs]# gluster volume status Status of volume: cps-vms-gfs Gluster process TCP Port RDMA Port Online Pid ------------------------------------------------------------------------------ Brick 10.8.255.1:/gluster/cps-vms-gfs01/brick 49152 0 Y 4054 Brick 10.8.255.2:/gluster/cps-vms-gfs02/brick 49152 0 Y 4144 Brick 10.8.255.3:/gluster/cps-vms-gfs03/brick 49152 0 Y 4294 Self-heal Daemon on localhost N/A N/A Y 4279 Self-heal Daemon on cps-vms-gfs02.cisco.com N/A N/A Y 5185 Self-heal Daemon on 10.196.152.145 N/A N/A Y 50948 Task Status of Volume cps-vms-gfs ------------------------------------------------------------------------------ There are no active volume tasks I am running ovirt 4.2.5 and gluster 3.12.11. Thanks!

2 3