- Users - oVirt List Archives

Failed to lock byte 100 - when booting VM with attached CD
by Simon Vincent 05 Oct '18

05 Oct '18

I have found recently I can't boot any VMs which have a CD attached to it. I get the following error. VM Test is down with error. Exit message: internal error: qemu unexpectedly closed the monitor: 2018-10-04T11:53:07.031875Z qemu-kvm: -device ide-cd,bus=ide.1,unit=0,drive=drive-ua-5ccd6310-a1e5-4019-b989-795529c70794,id=ua-5ccd6310-a1e5-4019-b989-795529c70794,bootindex=2: Failed to lock byte 100 2018-10-04T11:53:07.032264Z qemu-kvm: -device ide-cd,bus=ide.1,unit=0,drive=drive-ua-5ccd6310-a1e5-4019-b989-795529c70794,id=ua-5ccd6310-a1e5-4019-b989-795529c70794,bootindex=2: Failed to lock byte 100 2018-10-04T11:53:07.032285Z qemu-kvm: -device ide-cd,bus=ide.1,unit=0,drive=drive-ua-5ccd6310-a1e5-4019-b989-795529c70794,id=ua-5ccd6310-a1e5-4019-b989-795529c70794,bootindex=2: Failed to lock byte 100 Unexpected error in raw_apply_lock_bytes() at block/file-posix.c:642: 2018-10-04T11:53:07.032665Z qemu-kvm: -device ide-cd,bus=ide.1,unit=0,drive=drive-ua-5ccd6310-a1e5-4019-b989-795529c70794,id=ua-5ccd6310-a1e5-4019-b989-795529c70794,bootindex=2: Failed to lock byte 100. I have tried relaxing the permissions on the iSO NFS share and even removed the iSO domain and added a new one, but I still get the problem. Regards Simon

2 1

iso domain don't list available images
by Nathanaël Blanchet 04 Oct '18

04 Oct '18

Hello, I detached an existing iso domain from an other ovirt instance and attached it to on a fresh 4.2 install, but no images are available. Is it a known bug? -- Nathanaël Blanchet Supervision réseau Pôle Infrastrutures Informatiques 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr

2 2

Unable to mount CephFS as POSIX Compliant FS
by ryan.terpstra＠gmail.com 04 Oct '18

04 Oct '18

I have a ceph filesystem that I can manually mount on my ovirt host. [root@ovirt121 ~]# mount -t ceph ceph01:/ /mnt -o name=admin,secret=<secret removed for security> [root@ovirt121 ~]# touch /mnt/test works great! Then I umount that filesystem and attempt to add storage domain in ovirt engine. Settings: Storage type: POSIX compliant FS Host to use: ovirt121 name: cephdata Path: ceph01:/ vfs type: ceph mount options: name=admin,secret=<secret removed for security> In the oVirt web UI I get a "General Exception" error. On the host I see this in vdsm.log: 2018-10-03 23:47:58,165+0000 INFO (jsonrpc/6) [vdsm.api] START connectStorageServer(domType=6, spUUID=u'00000000-0000-0000-0000-000000000000', conList=[{u'mnt_options': u'name=admin,secret=AQDJI7RbS4Z2GhAAhlyWUvX7wtPNzO6n5vqjsQ==', u'id': u'00000000-0000-0000-0000-000000000000', u'connection': u'ceph01:/', u'iqn': u'', u'user': u'', u'tpgt': u'1', u'vfs_type': u'ceph', u'password': '********', u'port': u''}], options=None) from=::ffff:10.78.7.221,54910, flow_id=ba106a2d-e204-4da7-acc7-29b70c3ff759, task_id=b5e0c87c-8838-4b49-8590-11382a02d67f (api:46) 2018-10-03 23:47:58,166+0000 INFO (jsonrpc/6) [storage.StorageServer.MountConnection] Creating directory u'/rhev/data-center/mnt/ceph01:_' (storageServer:167) 2018-10-03 23:47:58,166+0000 INFO (jsonrpc/6) [storage.fileUtils] Creating directory: /rhev/data-center/mnt/ceph01:_ mode: None (fileUtils:197) 2018-10-03 23:47:58,166+0000 INFO (jsonrpc/6) [storage.Mount] mounting ceph01:/ at /rhev/data-center/mnt/ceph01:_ (mount:204) 2018-10-03 23:47:58,218+0000 ERROR (jsonrpc/6) [storage.HSM] Could not connect to storageServer (hsm:2415) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/storage/hsm.py", line 2412, in connectStorageServer conObj.connect() File "/usr/lib/python2.7/site-packages/vdsm/storage/storageServer.py", line 183, in connect self.getMountObj().getRecord().fs_file) File "/usr/lib/python2.7/site-packages/vdsm/storage/mount.py", line 253, in getRecord (self.fs_spec, self.fs_file)) OSError: [Errno 2] Mount of `ceph01:/` at `/rhev/data-center/mnt/ceph01:_` does not exist 2018-10-03 23:47:58,218+0000 INFO (jsonrpc/6) [vdsm.api] FINISH connectStorageServer return={'statuslist': [{'status': 100, 'id': u'00000000-0000-0000-0000-000000000000'}]} from=::ffff:10.78.7.221,54910, flow_id=ba106a2d-e204-4da7-acc7-29b70c3ff759, task_id=b5e0c87c-8838-4b49-8590-11382a02d67f (api:52) However, if i run "monut" or "cat /proc/mounts" I can see the cephfs was properly mounted, I can even touch files. [root@ovirt121 ~]# touch /rhev/data-center/mnt/ceph01\:_/ceph_ovirt_test [root@ovirt121 ~]# [root@ovirt121 ~]# cat /proc/mounts <...bunch of mounts...> 10.78.71.1:/ /rhev/data-center/mnt/ceph01:_ ceph rw,relatime,name=admin,secret=<hidden>,acl,wsize=16777216 0 0 [root@ovirt121 ~]# Any thoughts? oVirt version is 4.2.6.4-1.el7, running on CentOS 7 18.05.

3 3

no space left to upgrade hosted-engine
by Nathanaël Blanchet 04 Oct '18

04 Oct '18

I've deployed and hosted-engine with the hosted-engine provided appliance. When runing hosted-engine --upgrade-appliance on one host, it tells me "If your engine VM is already based on el7 you can also simply upgrade the engine there." So I launched a yum update on the hosted-engine, but it complains there is no space left on / [root@infra ~]# df -h Sys. de fichiers Taille Utilisé Dispo Uti% Monté sur /dev/vda3 6,2G 6,2G 20K 100% / devtmpfs 7,8G 0 7,8G 0% /dev tmpfs 7,8G 4,0K 7,8G 1% /dev/shm tmpfs 7,8G 9,0M 7,8G 1% /run tmpfs 7,8G 0 7,8G 0% /sys/fs/cgroup /dev/mapper/ovirt-home 1014M 33M 982M 4% /home /dev/mapper/ovirt-tmp 2,0G 33M 2,0G 2% /tmp /dev/vda1 1014M 162M 853M 16% /boot /dev/mapper/ovirt-var 20G 631M 20G 4% /var /dev/mapper/ovirt-log 10G 58M 10G 1% /var/log /dev/mapper/ovirt-audit 1014M 59M 956M 6% /var/log/audit tmpfs 1,6G 0 1,6G 0% /run/user/0 Is the only way is to deploy the new appliance? -- Nathanaël Blanchet Supervision réseau Pôle Infrastrutures Informatiques 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr

2 2

ODL and Openstack issue
by Soujanya Bargavi 04 Oct '18

04 Oct '18

I am running one controller and one compute node. Controller node is running both ODL and OpenStack. I created tenants, underthem i created networks and launched instances on them. All is see on ODL web GUI is 3 swithces, and I guess those are br-int and br-ex of controller and br-int of compute and the links are missing too. Is there anyway where I can see my whole OpenStack https://goo.gl/6CgufL topology on ODL GUI with the links?

1 0

Reg: Enabling Nested virtualization.
by syedquadeer＠ctel.in 04 Oct '18

04 Oct '18

Dear Team, Need help to enable nested virtualization in Ovirt VM's. As when I checked my cpu info and kvm acceleration info, it is giving below output. # kvm-ok INFO: Your CPU does not support KVM extensions KVM acceleration can NOT be used # cat /sys/module/kvm/parameters/nested cat: /sys/module/kvm/parameters/nested: No such file or directory # virsh -r list Id Name State ---------------------------------------------------- Thanks & Regards, Syed Abdul Qadeer. 7660022818.

2 1

Re: Need to register with oVirt community
by Evgheni Dereveanchin 04 Oct '18

04 Oct '18

Hi Manish, If you want to deploy oVirt and use it, please follow our installation guide: https://www.ovirt.org/documentation/install-guide/Installation_Guide/ If you'd like to contribute to the project there's several ways like submitting patches to the code or helping with documentation or infra: https://www.ovirt.org/community/ Please let me know if you have any further questions. On Wed, Oct 3, 2018 at 10:12 AM Manish Shukla <Manish.Shukla(a)locuz.com> wrote: > Dear Team, > > > > Please suggest me how to joined community. I would like to be an > implementation of the oVirt infrastructure. > > > > > > > > > > Thanks & Regards, > > > > Manish SHUKLA > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/2NMDN6K643COC… > -- Regards, Evgheni Dereveanchin

1 0

[ANN] oVirt 4.2.7 Second Release Candidate is now available
by Sandro Bonazzola 04 Oct '18

04 Oct '18

The oVirt Project is pleased to announce the availability of the oVirt 4.2.7 Second Release Candidate, as of October 4th, 2018. This update is a release candidate of the seventh in a series of stabilization updates to the 4.2 series. This is pre-release software. This pre-release should not to be used in production. This release is available now for: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available - oVirt Node is available [2] Additional Resources: * Read more about the oVirt 4.2.7 release highlights: http://www.ovirt.org/release/4.2.7/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.2.7/ [2] http://resources.ovirt.org/pub/ovirt-4.2-pre/iso/ -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig> <https://www.redhat.com/en/events/red-hat-open-source-day-italia?sc_cid=701f…>

1 0

lost connection to hosted engine
by Artem Tambovskiy 04 Oct '18

04 Oct '18

Hi, Just run into the issue during cluster upgrade from 4.24 to 4.2.6.1. I'm running small cluster with 2 hosts and gluster storage. Once I upgraded one of the hosts to 4.2.6.1 something went wrong (looks like it tried to start HE instance) and I can't connect to hosted-engine any longer. As I can see HostedEngine is still running on the second host (and another yet 7 VM's) , but I can't stop it. ovirt-ha-agent and ovirt-ha-broker are failing to start. hosted-engine --vm-status gives nothing but error message "The hosted engine configuration has not been retrieved from shared storage. Please ensure that ovirt-ha-agent is running and the storage server is reachable." ps -ef shows plenty of vdsm processes in defunc state thats probably the reason why agent and brocker can't start. Just wondering that is the good way to start problem resolution here to minimize downtime for running VM's? Restart vdsm and try again restarting agent and broker or just reboot the whole host? Regards, Artem

2 1

hosted-engine --deploy erorr
by mustafa.taha.mu95＠gmail.com 04 Oct '18

04 Oct '18

i configuer ovirt-self host and then i clear it by this command : /usr/sbin/ovirt-hosted-engine-cleanup then i want to re-deploy the selfhost by this error appear : [root@ovirtnode44 ~]# hosted-engine --deploy [ INFO ] Stage: Initializing [ INFO ] Stage: Environment setup During customization use CTRL-D to abort. Continuing will configure this host for serving as hypervisor and create a local VM with a running engine. The locally running engine will be used to configure a storage domain and create a VM there. At the end the disk of the local VM will be moved to the shared storage. Are you sure you want to continue? (Yes, No)[Yes]: It has been detected that this program is executed through an SSH connection without using screen. Continuing with the installation may lead to broken installation if the network connection fails. It is highly recommended to abort the installation and run it inside a screen session using command "screen". Do you want to continue anyway? (Yes, No)[No]: yes Configuration files: [] Log file: /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20181004025609-bzthh6.log Version: otopi-1.7.8 (otopi-1.7.8-1.el7) [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment setup [ INFO ] Stage: Environment customization --== STORAGE CONFIGURATION ==-- --== HOST NETWORK CONFIGURATION ==-- [ INFO ] Bridge ovirtmgmt already created Please indicate a pingable gateway IP address [192.168.3.2]: [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Detecting interface on existing management bridge] [ INFO ] ok: [localhost] [ INFO ] TASK [Get all active network interfaces] [ INFO ] TASK [Filter bonds with bad naming] [ INFO ] TASK [Generate output list] [ INFO ] ok: [localhost] Please indicate a nic to set ovirtmgmt bridge on: (enp24s0f0) [enp24s0f0]: --== VM CONFIGURATION ==-- If you want to deploy with a custom engine appliance image, please specify the path to the OVA archive you would like to use (leave it empty to skip, the setup will use ovirt-engine-appliance rpm installing it if missing): [ INFO ] Detecting host timezone. Please provide the FQDN you would like to use for the engine appliance. Note: This will be the FQDN of the engine VM you are now going to launch, it should not point to the base host or to any other existing machine. Engine VM FQDN: []: ovirtengine.exalt.ps Please provide the domain name you would like to use for the engine appliance. Engine VM domain: [exalt.ps] Enter root password that will be used for the engine appliance: Confirm appliance root password: Enter ssh public key for the root user that will be used for the engine appliance (leave it empty to skip): [WARNING] Skipping appliance root ssh public key Do you want to enable ssh access for the root user (yes, no, without-password) [yes]: Please specify the number of virtual CPUs for the VM (Defaults to appliance OVF value): [4]: Please specify the memory size of the VM in MB (Defaults to appliance OVF value): [16384]: You may specify a unicast MAC address for the VM or accept a randomly generated default [00:16:3e:03:a8:09]: How should the engine VM network be configured (DHCP, Static)[DHCP]? Static Please enter the IP address to be used for the engine VM [192.168.0.1]: 192.168.200.45 [ INFO ] The engine VM will be configured to use 192.168.200.45/16 Please provide a comma-separated list (max 3) of IP addresses of domain name servers for the engine VM Engine VM DNS (leave it empty to skip) [192.168.200.6]: Add lines for the appliance itself and for this host to /etc/hosts on the engine VM? Note: ensuring that this host could resolve the engine VM hostname is still up to you (Yes, No)[No] --== HOSTED ENGINE CONFIGURATION ==-- Please provide the name of the SMTP server through which we will send notifications [localhost]: Please provide the TCP port number of the SMTP server [25]: Please provide the email address from which notifications will be sent [root@localhost]: Please provide a comma-separated list of email addresses which will get notifications [root@localhost]: Enter engine admin password: Confirm engine admin password: [ INFO ] Stage: Setup validation [ INFO ] Stage: Transaction setup [ INFO ] Stage: Misc configuration [ INFO ] Stage: Package installation [ INFO ] Stage: Misc configuration [ INFO ] Stage: Transaction commit [ INFO ] Stage: Closing up [ INFO ] Cleaning previous attempts [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Stop libvirt service] [ INFO ] ok: [localhost] [ INFO ] TASK [Drop vdsm config statements] [ INFO ] TASK [Restore initial abrt config files] [ INFO ] TASK [Restart abrtd service] [ INFO ] changed: [localhost] [ INFO ] TASK [Drop libvirt sasl2 configuration by vdsm] [ INFO ] changed: [localhost] [ INFO ] TASK [Stop and disable services] [ INFO ] TASK [Start libvirt] [ INFO ] changed: [localhost] [ INFO ] TASK [Check for leftover local Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [Destroy leftover local Hosted Engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [Check for leftover defined local Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [Undefine leftover local engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [Check for leftover defined Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [Undefine leftover engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [Remove eventually entries for the local VM from known_hosts file] [ INFO ] changed: [localhost] [ INFO ] Starting local VM [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Start libvirt] [ INFO ] ok: [localhost] [ INFO ] TASK [Activate default libvirt network] [ INFO ] ok: [localhost] [ INFO ] TASK [Get libvirt interfaces] [ INFO ] ok: [localhost] [ INFO ] TASK [Get routing rules] [ INFO ] changed: [localhost] [ INFO ] TASK [Save bridge name] [ INFO ] ok: [localhost] [ INFO ] TASK [Wait for the bridge to appear on the host] [ INFO ] changed: [localhost] [ INFO ] TASK [Refresh network facts] [ INFO ] skipping: [localhost] [ INFO ] TASK [Prepare CIDR for virbr0] [ INFO ] ok: [localhost] [ INFO ] TASK [Add outbound route rules] [ INFO ] skipping: [localhost] [ INFO ] TASK [Add inbound route rules] [ INFO ] skipping: [localhost] [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Avoid localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [Get host address resolution] [ INFO ] changed: [localhost] [ INFO ] TASK [Check address resolution] [ INFO ] skipping: [localhost] [ INFO ] TASK [Parse host address resolution] [ INFO ] ok: [localhost] [ INFO ] TASK [Ensure host address resolves locally] [ INFO ] skipping: [localhost] [ INFO ] TASK [Get target address from selected interface] [ INFO ] ok: [localhost] [ INFO ] TASK [Check the resolved address resolves on the selected interface] [ INFO ] skipping: [localhost] [ INFO ] TASK [Check for alias] [ INFO ] changed: [localhost] [ INFO ] TASK [Ensure the resolved address resolves only on the selected interface] [ INFO ] skipping: [localhost] [ INFO ] TASK [Avoid localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [Get engine FQDN resolution] [ INFO ] changed: [localhost] [ INFO ] TASK [Check engine FQDN resolution] [ INFO ] skipping: [localhost] [ INFO ] TASK [Parse engine FQDN resolution] [ INFO ] ok: [localhost] [ INFO ] TASK [Ensure engine FQDN doesn't resolve locally] [ INFO ] skipping: [localhost] [ INFO ] TASK [Check http/https proxy] [ INFO ] TASK [Register the engine FQDN as a host] [ INFO ] changed: [localhost] [ INFO ] TASK [Create directory for local VM] [ INFO ] changed: [localhost] [ INFO ] TASK [Set local vm dir path] [ INFO ] ok: [localhost] [ INFO ] TASK [Fix local VM directory permission] [ INFO ] changed: [localhost] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Install ovirt-engine-appliance rpm] [ INFO ] ok: [localhost] [ INFO ] TASK [Parse appliance configuration for path] [ INFO ] changed: [localhost] [ INFO ] TASK [Parse appliance configuration for sha1sum] [ INFO ] changed: [localhost] [ INFO ] TASK [Get OVA path] [ INFO ] ok: [localhost] [ INFO ] TASK [Compute sha1sum] [ INFO ] ok: [localhost] [ INFO ] TASK [Compare sha1sum] [ INFO ] skipping: [localhost] [ INFO ] TASK [Register appliance PATH] [ INFO ] skipping: [localhost] [ INFO ] TASK [Extract appliance to local VM directory] [ INFO ] changed: [localhost] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Find the local appliance image] [ INFO ] ok: [localhost] [ INFO ] TASK [Set local_vm_disk_path] [ INFO ] ok: [localhost] [ INFO ] TASK [Get appliance disk size] [ INFO ] changed: [localhost] [ INFO ] TASK [Parse qemu-img output] [ INFO ] ok: [localhost] [ INFO ] TASK [Create cloud init user-data and meta-data files] [ INFO ] TASK [Create ISO disk] [ INFO ] changed: [localhost] [ INFO ] TASK [Create local VM] [ INFO ] changed: [localhost] [ INFO ] TASK [Get local VM IP] [ INFO ] changed: [localhost] [ INFO ] TASK [Remove eventually entries for the local VM from /etc/hosts] [ INFO ] changed: [localhost] [ INFO ] TASK [Create an entry in /etc/hosts for the local VM] [ INFO ] changed: [localhost] [ INFO ] TASK [Wait for SSH to restart on the local VM] [ INFO ] ok: [localhost -> localhost] [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [ovirtengine.exalt.ps] [ INFO ] TASK [Wait for the local VM] [ INFO ] ok: [ovirtengine.exalt.ps] [ INFO ] TASK [Add an entry for this host on /etc/hosts on the local VM] [ INFO ] changed: [ovirtengine.exalt.ps] [ INFO ] TASK [Set FQDN] [ INFO ] changed: [ovirtengine.exalt.ps] [ INFO ] TASK [Force the local VM FQDN to temporary resolve on the natted network address] [ INFO ] changed: [ovirtengine.exalt.ps] [ INFO ] TASK [Restore sshd reverse DNS lookups] [ INFO ] changed: [ovirtengine.exalt.ps] [ INFO ] TASK [Generate an answer file for engine-setup] [ INFO ] changed: [ovirtengine.exalt.ps] [ INFO ] TASK [Include before engine-setup custom tasks files for the engine VM] [ INFO ] TASK [Execute engine-setup] [ INFO ] changed: [ovirtengine.exalt.ps] [ INFO ] TASK [Include after engine-setup custom tasks files for the engine VM] [ INFO ] TASK [Configure LibgfApi support] [ INFO ] skipping: [ovirtengine.exalt.ps] [ INFO ] TASK [Restart ovirt-engine service for LibgfApi support] [ INFO ] skipping: [ovirtengine.exalt.ps] [ INFO ] TASK [Mask cloud-init services to speed up future boot] [ INFO ] TASK [Clean up bootstrap answer file] [ INFO ] changed: [ovirtengine.exalt.ps] [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Wait for ovirt-engine service to start] [ INFO ] ok: [localhost] [ INFO ] TASK [Detect VLAN ID] [ INFO ] changed: [localhost] [ INFO ] TASK [Set Engine public key as authorized key without validating the TLS/SSL certificates] [ INFO ] changed: [localhost] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Obtain SSO token using username/password credentials] [ INFO ] ok: [localhost] [ INFO ] TASK [Enable GlusterFS at cluster level] [ INFO ] skipping: [localhost] [ INFO ] TASK [Set VLAN ID at datacenter level] [ INFO ] skipping: [localhost] [ INFO ] TASK [Force host-deploy in offline mode] [ INFO ] ok: [localhost] [ INFO ] TASK [Add host] [ INFO ] changed: [localhost] [ INFO ] TASK [Wait for the host to be up] [ ERROR ] fatal: [localhost]: FAILED! => {"ansible_facts": {"ovirt_hosts": []}, "attempts": 120, "changed": false} [ INFO ] TASK [Fetch logs from the engine VM] [ INFO ] ok: [localhost] [ INFO ] TASK [Set destination directory path] [ INFO ] ok: [localhost] [ INFO ] TASK [Create destination directory] [ INFO ] changed: [localhost] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Find the local appliance image] [ INFO ] ok: [localhost] [ INFO ] TASK [Set local_vm_disk_path] [ INFO ] ok: [localhost] [ INFO ] TASK [Give the vm time to flush dirty buffers] [ INFO ] TASK [Copy engine logs] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Remove local vm dir] [ INFO ] changed: [localhost] [ INFO ] TASK [Notify the user about a failure] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The system may not be provisioned according to the playbook results: please check the logs for the issue, fix accordingly or re-deploy from scratch.\n"} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook [ INFO ] Stage: Clean up [ INFO ] Cleaning temporary resources [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch logs from the engine VM] [ INFO ] ok: [localhost] [ INFO ] TASK [Set destination directory path] [ INFO ] ok: [localhost] [ INFO ] TASK [Create destination directory] [ INFO ] changed: [localhost] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Find the local appliance image] [ INFO ] ok: [localhost] [ INFO ] TASK [Set local_vm_disk_path] [ INFO ] skipping: [localhost] [ INFO ] TASK [Give the vm time to flush dirty buffers] [ INFO ] ok: [localhost] [ INFO ] TASK [Copy engine logs] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Remove local vm dir] [ INFO ] ok: [localhost] [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20181004031555.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Hosted Engine deployment failed: please check the logs for the issue, fix accordingly or re-deploy from scratch. Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20181004025609-bzthh6.log

3 2