- Users - oVirt List Archives

vGPU: oVirt 4.2.6.1 + GRID K2
by femi adegoke 29 Sep '18

29 Sep '18

Anyone had luck using a GRID K2 for vGPU pass-through? I can't seem to install the driver (367.128-370.28)

3 18

Re: Info about procedure to shutdown hosted engine VM
by Giuseppe Ragusa 28 Sep '18

28 Sep '18

Hi all, sorry for being late to such an interesting thread. I discussed almost this same issue (properly and programmatically shutting down a complete oVirt environment in a way that also guarantees a clean and easy power up later) privately with some friends some time ago. Please note that the issue has been already discussed on the mailing list before (we had started from those hints):http://lists.ovirt.org/pipermail/users/2017-August/083667.html I will translate here from Italian our description of the scenario, hoping to add something to the discussion (maybe simply as another use case): Setup: * We are talking about an hyperconverged oVirt+GlusterFS (HE-HC) setup (let's say 1 or 3 nodes, but more should work the same) * We are talking about abusing the "hyperconverged" term above (so CTDB/Samba/Gluster-NFS/Gluster- block are also running, directly on the nodes) ;-) Business case: * Let's say that we are in a small business setup and we do not have the luxury of diesel-powered generators guaranteeing no black-outs * Let's say that we have (intelligent) UPSs with limited battery, so that we must make sure that a clean global power down gets initiated as soon as the UPSs signal that a certain low threshold has been passed (threshold to be carefully defined in order to give enough time for a clean shutdown) * Let's say that those UPSs may be: * 1 UPS powering everything (smells single-point-of-failure, but could be) * 2 UPSs with all physical equipment having redundant (2) power cords * 3 or more UPSs somehow variously connected * Let's say the the UPSs may be network-monitored (SNMP on the ovirtmgmt network) or directly attached to the nodes (USB/serial) General strategy leading to shutdown decision: * We want to centralize UPS management and use something like NUT[1] running on the Engine vm * Network controlled UPSs will be directly controlled by NUT running on the Engine vm, while directly attached UPSs (USB/serial) will be controlled by NUT running on the nodes they are attached to, but only in a "proxy" mode (relaying actual control/logic to the NUT service running on the Engine vm) * A proper logic will be devised (knowing the capacity of each UPS, the load it sustains and what actually means to power down those connected equipment in view of quorum maintenance) in order to decide whether a partial power down or a complete global power down are needed, in case only a subset of UPSs should experience a low-battery event (obviously a complete low-battery on all UPSs means global power down) Detailed strategy of shutdown implementation: * A partial power down (only some nodes) means: * Those nodes will be put in local maintenance (vms get automatically migrated on other nodes or cleanly shut down if migration is impossible because of constraints or limited resources; shutdown of vms should respect proper order, using tags, dependency rules, HA status or other hints) but without stopping GlusterFS services (since there are further services depending on those, see below) * Services running on those nodes get cleanly stopped: * Proper stopping of oVirt HA Agent and Broker services on those nodes * Proper stopping of CTDB (brings down Samba too) and Gluster-block (NFS-Ganesha too, if used instead of Gluster-NFS) services on those nodes * Clean unmounting of all still-mounted GlusterFS volumes on those nodes * Clean OS poweroff of those nodes * A global power down of everything means: * All guest vms (except the Engine) get cleanly shut down (by means of oVirt guest agent), possibly in a proper dependency order (using tags, dependency rules, HA status or other hints) * All storage domains (except the Engine one) are put in maintenance * Global oVirt maintenance is activated (no more HA actions to guarantee that the Engine is up) * Clean OS poweroff of the Engine vm * Proper stopping of oVirt HA Agent and Broker services on all nodes * Proper stopping of CTDB (brings down Samba too) and Gluster- block (NFS-Ganesha too, if used instead of Gluster-NFS) services on all nodes * Clean unmounting of all still-mounted GlusterFS volumes on all nodes * Clean stop of all GlusterFS volumes (issued from a single, chosen node) * Clean OS poweroff of all nodes Sorry for the lenghty email :-) Many thanks. Best regards, Giuseppe PS: I will read through the official Ansible role for shutdown asap (I surely still need a lot of learning for writing proper Ansible playbooks... :-D )I just published our Ansible mockup [2]of the above detailed global strategy, but it's based on statically collected info and must be run from an external machine, to say nothing of my awful Ansible style and the complete lack of the NUT logic and configuration part On Wed, Sep 12, 2018, at 16:15, Simone Tiraboschi wrote: > > > On Wed, Sep 12, 2018 at 3:49 PM Gianluca Cecchi > <gianluca.cecchi(a)gmail.com> wrote:>> On Wed, Sep 12, 2018 at 10:03 AM Simone Tiraboschi >> <stirabos(a)redhat.com> wrote:>>> >>>> >>>> Does it mean that I have to run the ansible-playbook command from >>>> an external server and use as host in inventory the engine server, >>>> or does it mean that the ansible-playbook command is to be run from >>>> within the server where the ovirt-engine service is running and so >>>> keep intact the lines inside the smple yal file:>>>> " >>>> - name: oVirt shutdown environment >>>> hosts: localhost >>>> connection: local >>>> " >>>> >>> >>> Both options are valid. >> >> Good! It seems it worked ok in shutdown mode (the default one) in a >> test hosted engine based 4.2.6 environment, where I have 2 hosts >> (both are hosted engine hosts), the hosted engine VM + 3 VMs>> Initially ovnode2 is both SPM and hosts the HostedEngine VM >> If I run the playbook from inside ovmgr42: >> >> [root@ovmgr42 tests]# ansible-playbook test.yml >> [WARNING]: provided hosts list is empty, only localhost is >> available. Note that the implicit>> localhost does not match 'all' >> >> PLAY [oVirt shutdown environment] >> ******************************************************************>> >> TASK [oVirt.shutdown-env : Populate service facts] >> *************************************************>> ok: [localhost] >> >> TASK [oVirt.shutdown-env : Enforce ovirt-engine machine] >> *******************************************>> skipping: [localhost] >> >> TASK [oVirt.shutdown-env : Enforce ovirt-engine status] >> ********************************************>> skipping: [localhost] >> >> TASK [oVirt.shutdown-env : Login to oVirt] >> *********************************************************>> ok: [localhost] >> >> TASK [oVirt.shutdown-env : Get hosts] >> **************************************************************>> ok: [localhost] >> >> TASK [oVirt.shutdown-env : set_fact] >> ***************************************************************ok: >> [localhost]>> >> TASK [oVirt.shutdown-env : Enforce global maintenance mode] >> ****************************************>> skipping: [localhost] >> >> TASK [oVirt.shutdown-env : Warn about HE global maintenace mode] >> ***********************************>> ok: [localhost] => { >> "msg": "HE global maintenance mode has been set; you have to exit >> it to get the engine VM started when needed\n">> } >> >> TASK [oVirt.shutdown-env : Shutdown of HE hosts] >> ***************************************************>> changed: [localhost] => (item= . . . u'name': u'ovnode1', . . . >> u'spm': {u'priority': 5, u'status': u'none'}})>> changed: [localhost] => (item= . . . u'name': u'ovnode2', . . . >> u'spm': {u'priority': 5, u'status': u'spm'}})>> >> >> TASK [oVirt.shutdown-env : Shutdown engine host/VM] >> ************************************************>> Connection to ovmgr42 closed by remote host. >> Connection to ovmgr42 closed. >> [g.cecchi@ope46 ~]$ >> >> At the end the 2 hosts (HP blades) are in power off state, as >> expected.>> >> ILO event log of ovnode1: >> Last Update Initial Update Count Description >> 09/12/2018 10:13 09/12/2018 10:13 1 Server power removed. >> >> ILO event log of ovnode2: >> Last Update Initial Update Count Description >> 09/12/2018 10:14 09/12/2018 10:14 1 Server power removed. >> >> Actually due to time settings, they are to be intended as 11:13 and >> 11:14 my local time>> >> In /var/log/libvirt/qemu/HostedEngine.log of node ovnode2 >> >> 2018-09-11 17:04:16.388+0000: starting up libvirt version: 3.9.0, . . >> . hostname: ovnode2>> ... >> 2018-09-12 09:11:29.641+0000: shutting down, reason=shutdown >> >> Actually we are at 11:11 local time >> >> For now I have then manually restarted all the env >> I began starting from ovnode2 (that was SPM and with HostedEngine >> during shutdown), keeping ovnode1 powered off, and it took some time >> because I got some messages like this (to be read bottom up)>> >> Host ovnode1 failed to recover. 9/12/18 2:30:21 PM >> Host ovnode1 is non responsive. 9/12/18 2:30:21 PM >> ... >> Host ovnode1 is not responding. It will stay in Connecting state for >> a grace period of 60 seconds and after that an attempt to fence the >> host will be issued. 9/12/18 2:27:40 PM>> Failed to Reconstruct Master Domain for Data Center MYDC42. 9/12/18 >> 2:27:34 PM>> VDSM ovnode2 command ConnectStoragePoolVDS failed: Cannot find master >> domain: u'spUUID=5af30d59-004c-02f2-01c9-0000000000b8, sdUUID=cbc308db-5468-4e6d-aabb- >> f9d133d05de2' 9/12/18 2:27:33 PM>> Invalid status on Data Center MYDC42. Setting status to Non >> Responsive. 9/12/18 2:27:27 PM>> ... >> ETL Service Started 9/12/18 2:26:27 PM >> >> With ovnode1 still powered off, if I try to start it from the >> gui I get:>> >> Trying to power on ovnode1 I get in events: >> Host ovnode1 became non responsive. Fence operation skipped as the >> system is still initializing and this is not a host where hosted >> engine was running on previously. 9/12/18 2:30:21 PM>> >> and as popup I get this "operation canceled" window: >> https://drive.google.com/file/d/1IWXASJHRylZR6ePWtGUcKiLbYjg__eNS/view?usp=…>> >> What's the meaning? >> In the phrase "the system is still initializing and this is not a >> host where hosted engine was running" the term THIS to which host is >> referred?>> After some minutes I automatically get (to be read bottom up): > > We are tracing ad discussing it here: > https://bugzilla.redhat.com/show_bug.cgi?id=1609029 > > As you noticed after a few minutes everything comes back to up status > but the startup phase is really confusing.> We are working on patch to provide a smoother startup experience > although I don't any concrete drawback of the current code.> >> >> Host ovnode1 power management was verified successfully. 9/12/18 >> 2:40:47 PM>> Status of host ovnode1 was set to Up. 9/12/18 2:40:47 PM >> .. >> No faulty multipath paths on host ovnode1 9/12/18 2:40:46 PM >> Storage Pool Manager runs on Host ovnode2 (Address: ovnode2), Data >> Center MYDC42. 9/12/18 2:37:55 PM>> Reconstruct Master Domain for Data Center MYDC42 completed. >> 9/12/182:37:49 PM>> .. >> Host ovnode1 was started by SYSTEM. 9/12/18 2:32:37 PM >> Power management start of Host ovnode1 succeeded. 9/12/18 2:32:37 PM>> Executing power management status on Host ovnode1 using Proxy Host >> ovnode2 and Fence Agent ipmilan:172.16.1.52. 9/12/18 2:32:26 PM>> Power management start of Host ovnode1 initiated. 9/12/18 2:32:26 PM>> Auto fence for host ovnode1 was started. 9/12/18 2:32:26 PM >> Storage Domain ISCSI_2TB (Data Center MYDC42) was deactivated by >> system because it's not visible by any of the hosts. 9/12/18 >> 2:32:22 PM>> .. >> Executing power management status on Host ovnode1 using Proxy Host >> ovnode2 and Fence Agent ipmilan:172.16.1.52. 9/12/18 2:32:19 PM>> Power management stop of Host ovnode1 initiated. 9/12/18 2:32:17 PM >> Executing power management status on Host ovnode1 using Proxy Host >> ovnode2 and Fence Agent ipmilan:172.16.1.52. 9/12/18 2:32:16 PM>> ... >> Host ovnode1 failed to recover. 9/12/18 2:30:21 PM >> Host ovnode1 is non responsive. 9/12/18 2:30:21 PM >> >> My questions are: >> >> - what if for some reason ovnode1 was not available during restart? >> Would have the system started the services anyway after some time >> in that case or could have it been a problem?> > ovnode1 will be in non operation state until available. > In the mean time the engine could elect a different SPM host > and so on.> >> - If I want to try to start the environment through ansible playbook >> I see that it seems I have to use "startup" tag, but it is not >> fully automated?> > As you can see from the playbook that role require an access to the > engine host or VM but not to each managed host.> This is required to fetch hosts list from the engine, use its power > management capabilities, credentiuals and so on.> No host details are required for playbook execution. > >> " >> A startup mode is also available: >> in the startup mode the role will bring up all the IPMI configured >> hosts and it>> will unset the global maintenance mode if on an hosted-engine >> environment.>> The startup mode will be executed only if the 'startup' tag is >> applied; shutdown mode is the default.>> The startup mode requires the engine to be already up. >> " >> Is the last sentence referred to a non-hosted engine environment? > > No, the engine host should be manually powered on if physical or the > at least one HE host (2 for the hyper converged case) should be > powered on.> Exiting global maintenance mode is up to the user as well. > >> Otherwise I don't understand "will unset the global maintenance mode >> if on an hosted-engine environment."> > You can also manually power on the engine VM with hosted-engine --vm- > start on a specific host while still in global maintenance mode.> >> Also with IPMI does it mean in general the power mgmt feature (in my >> case I have iLO and not ipmilan) or what?> > yes, power management in general, sorry for the confusion. > >> Where does it get the facts about hosts in hosted engine >> environment, as the engine is forcibly down if the hosted engine >> hosts are powered down?> > That's why the engine should be up. > >> >> Thanks in advance for your time >> Gianluca >> > _________________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/> List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/76S4YUHUDLKJB… Links: 1. https://networkupstools.org/ 2. https://github.com/Heretic-oVirt/ansible/blob/master/hvp/roles/common/globa…

1 0

VNC Console on iOS device using Shotcuts
by hy3nk4＠gmail.com 28 Sep '18

28 Sep '18

Hi, I am currently experimenting with ability to connect VM console from iPad. I have developed a workflow in Shorcuts app (formerly Workflow). https://www.icloud.com/shortcuts/183ccea2fcca472c8e05b0eb766a8b39 You have to install VNC viewer that is able to open vnc:// url on your device. I am using VNC Viewer - Remote Desktop by RealVNC (https://itunes.apple.com/cz/app/vnc-viewer-remote-desktop/id352019548?mt=8) Workflow is far from perfect so if you have any ideas to improve this workflow I am surely listening.

1 0

Libvirt import to oVirt 3.5?
by Mark Steele 28 Sep '18

28 Sep '18

Hello, Is there a mechanism for importing VM's from a KEMU Libvirt host to oVirt 3.5? I see there is an import menu item for import on 4.1 but not on my installation of 3.5. Best regards, *** *Mark Steele* CIO / VP Technical Operations | TelVue Corporation TelVue - We Share Your Vision 16000 Horizon Way, Suite 100 | Mt. Laurel, NJ 08054 800.885.8886 x128 | msteele(a)telvue.com | http://www.telvue.com twitter: http://twitter.com/telvue | facebook: https://www.facebook.com/telvue

4 6

Enabling Gluster Service
by Maton, Brett 28 Sep '18

28 Sep '18

I just enabled the Gluster service in an existing oVirt 7.2.7-1 cluster via the Web-UI which put all hosts into non-operational status. Lots of events being created: Could not find gluster uuid of server host001.local on Cluster testlab. Could not find gluster uuid of server host002.local on Cluster testlab. Could not find gluster uuid of server host003.local on Cluster testlab. and a bunch of failed vm migrations Is it possible to add glusterfs after ovirt has been installed and configured?

2 3

Host restarting for unknown reasons
by turboaaa＠gmail.com 27 Sep '18

27 Sep '18

I have a dual host, self hosted engine, cluster/datacenter. I call these Node1 and Node2. They are running CentOS 7 and I have been running the updates regular by putting each host into maintenance mode and installing the update via the web gui. Node1 is restarting at odd times, causing VMs on that node to start up on Node2 (which is by design). However the restarts are becoming more frequent and I am having a hard time figuring out what is causing it. Below is a snippet from the /var/log/ovirt-hosted-engine-ha/agent.log on Node1. My current plan is to simply rebuild Node1 by re-installing CentOS 7, and using the cluster tools to import it. MainThread::INFO::2018-09-10 10:04:25,907::hosted_engine::244::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_get_hostname) Found certificate common name: node1.***.com MainThread::INFO::2018-09-10 10:04:34,200::hosted_engine::522::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_broker) Initializing ha-broker connection MainThread::INFO::2018-09-10 10:04:34,202::brokerlink::77::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(start_monitor) Starting monitor ping, options {'addr': '192.168.4.1'} MainThread::ERROR::2018-09-10 10:04:34,203::hosted_engine::538::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_broker) Failed to start necessary monitors MainThread::ERROR::2018-09-10 10:04:34,203::agent::144::ovirt_hosted_engine_ha.agent.agent.Agent::(_run_agent) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/agent.py", line 131, in _run_agent return action(he) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/agent.py", line 55, in action_proper return he.start_monitoring() File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/hosted_engine.py", line 413, in start_monitoring self._initialize_broker() File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/hosted_engine.py", line 535, in _initialize_broker m.get('options', {})) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py", line 83, in start_monitor .format(type, options, e)) RequestError: Failed to start monitor ping, options {'addr': '192.168.4.1'}: [Errno 2] No such file or directory MainThread::ERROR::2018-09-10 10:04:34,204::agent::145::ovirt_hosted_engine_ha.agent.agent.Agent::(_run_agent) Trying to restart agent MainThread::INFO::2018-09-10 10:04:34,204::agent::89::ovirt_hosted_engine_ha.agent.agent.Agent::(run) Agent shutting down MainThread::INFO::2018-09-10 10:04:44,545::agent::67::ovirt_hosted_engine_ha.agent.agent.Agent::(run) ovirt-hosted-engine-ha agent 2.2.16 started MainThread::INFO::2018-09-10 10:04:44,583::hosted_engine::244::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_get_hostname) Found certificate common name: node1.***.com MainThread::INFO::2018-09-10 10:04:44,744::hosted_engine::522::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_broker) Initializing ha-broker connection MainThread::INFO::2018-09-10 10:04:44,745::brokerlink::77::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(start_monitor) Starting monitor ping, options {'addr': '192.168.4.1'} MainThread::ERROR::2018-09-10 10:04:44,746::hosted_engine::538::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_broker) Failed to start necessary monitors MainThread::ERROR::2018-09-10 10:04:44,746::agent::144::ovirt_hosted_engine_ha.agent.agent.Agent::(_run_agent) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/agent.py", line 131, in _run_agent return action(he) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/agent.py", line 55, in action_proper return he.start_monitoring() File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/hosted_engine.py", line 413, in start_monitoring self._initialize_broker() File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/hosted_engine.py", line 535, in _initialize_broker m.get('options', {})) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py", line 83, in start_monitor .format(type, options, e)) RequestError: Failed to start monitor ping, options {'addr': '192.168.4.1'}: [Errno 2] No such file or directory

5 15

VM Migration
by Budur Nagaraju 27 Sep '18

27 Sep '18

Hi , Have build oVirt4.2 setup with node4.2 ,while doing a vm migration am facing issues , below is the attached error. Can you please help to resolve? https://pastebin.com/BAzCsbAS Thanks, Nagaraju

2 2

upgrade 4.2.6 to 4.2.6.1: node status degraded
by femi adegoke 27 Sep '18

27 Sep '18

Upgrading one of my oVirt Node hosts from 4.2.6 to 4.2.6.1 The host will not boot, it has the following message: node status: DEGRADED Please check the status manually using 'nodectl check' # nodectl check Status: FAILED Bootloader ... FAILED - It looks like there are no valid bootloader entries. Please ensure this is fixed before rebooting. Layer boot entries ... FAILED - No bootloader entries which point to imgbased layers **the rest of the message has a bunch of OK entries** How do I fix this?

5 10

Adding arbiter to hyperconverged setup
by Simon Nussbaum 27 Sep '18

27 Sep '18

Dear all We are very happily running a hyperconverged gluster ovirt setup since beginning of 2016. Because we couldn't afford 3 well-equipped servers, we've set-up replica 3 with one arbiter gluster cluster. Back then the gluster integration in oVirt wasn't where it is today. We did not add the arbiter node to oVirt. Since then a lot changed and we suspect that from time to time we run into problems because we haven't added the arbiter node as a host to oVirt. We also think that we may profit from features and higher visibility in oVirt when it is aware of all gluster nodes. Now, we are thinking of adding the third, the arbiter host. Today we are using oVirt 4.2.0.2 and GlusterFS 3.12 on CentOS 7.4. We see two ways to accomplish this: 1) Add it as a new host 2) Import it as the discovered host in Compute >> Clusters >> OurCluster The questions we have: * First of all, is this a good idea anyway? * Do we need to install vdsmd on the arbiter node? * What is or is there difference between the two ways? Will it discover the gluster configuration or break it? Before we break it we would love to hear what you guys think. Thanks a lot Simon

3 2

Re: Adding arbiter to hyperconverged setup
by smirta＠gmx.net 27 Sep '18

27 Sep '18

I think I've just found the answer myself: https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3.3/h… https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3.4/h… But any inputs to my previous questions are still very welcome.

1 0