- Users - oVirt List Archives

Cannot configure local storage, network issue?
by Callum Smith 24 Sep '18

24 Sep '18

Dear All, I'lm getting this problem when trying to add local storage from the node: Cannot edit Host. Moving a host to a cluster with different management network is not allowed. That might cause connectivity loss. The cluster the host is in uses a different default network to the default cluster - is this the problem? Regards, Callum -- Callum Smith Research Computing Core Wellcome Trust Centre for Human Genetics University of Oxford e. callum(a)well.ox.ac.uk<mailto:callum@well.ox.ac.uk>

3 4

Hosted Engine - Unable to connect after deployment.
by Jeremy Tourville 24 Sep '18

24 Sep '18

I have a new installation of ovirt hyperconverged single node using glusterfs. I was able to run gdeploy and then use the web interface to run the self hosted engine setup. Ovirt node is running 4.2.5.1. If I go to localhost>ovirt machines tab from my node I see a message in the upper right corner saying "ovirt login in progress" with spinning icon after putting in the credentials. After a minute or less I am redirected to - https://engine.cyber-range.lan/ovirt-engine/web-ui/authorizedRedirect.jsp?r… where the web page says- "the connection has timed out." "The server at engine.cyber-range.lan is taking too long to respond." I also notice I no longer have the option to choose VNC or console because the web page keeps on attempting to reconnect. When I tried to connect using a console with virt-viewer it errored out on me. (I didn't make note of the message) Virtualization>hosted engine tab reports that my hosted engine is up. This is further confirmed by CLI #hosted-engine --check-liveliness. On occasion though, CLI reports HE is not up. If I try to ssh to HE sometimes I can connect, but it is VERY slow to do so. Once I connect it often appears to freeze or be very slow to enter any input commands to the HE. HE is effectively useless. I get frequent log messages in the console- "ovirt-ha-agent ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine ERROR Engine VM has bad health status, timeout in 300 seconds" This is a new setup, so I haven't lost anything if I need to start over. What do you suggest? Is there an easy way to recover or should I reinstall HE? Thanks for your advice!

2 1

Problem disks snapshots
by Marcelo Leandro 23 Sep '18

23 Sep '18

Hello, I am have a problem, after try delete um live snapshot I had this msg: General command validation failure. In snapshot disks in tab of storage the disk show ilegal. show consult databases: engine=# select snapshot_id,snapshot_type,status,description from snapshots wher e vm_id='1b48deed-5579-46d9-ac39-58bd96c266b5'; snapshot_id | snapshot_type | status | descr iption --------------------------------------+---------------+--------+---------------- ----------------- 848797d5-8b50-4ce1-941a-493c6ea3febd | NEXT_RUN | OK | Next Run config uration snapshot 75c120c8-6da6-4fbe-a5e0-1199238b37dc | REGULAR | OK | Backup da VM 75aa791f-8b6e-4022-b80e-7fc82e6ece00 | ACTIVE | OK | Active VM (3 rows) engine=# select image_guid,parentid,imagestatus,vm_snapshot_id,volume_type,volum e_format,active from images where image_group_id='e0f60213-15e6-4910-9d13-c4f4dc ac337e'; image_guid | parentid | i magestatus | vm_snapshot_id | volume_type | volume_format | active --------------------------------------+--------------------------------------+-- -----------+--------------------------------------+-------------+--------------- +-------- 46e2faf7-316e-4d15-bfb6-21d135837c41 | 00000000-0000-0000-0000-000000000000 | 4 | 75c120c8-6da6-4fbe-a5e0-1199238b37dc | 2 | 4 | f 3f9bf716-6410-431c-9133-d910f13d5cb6 | 00000000-0000-0000-0000-000000000000 | 1 | 75aa791f-8b6e-4022-b80e-7fc82e6ece00 | 2 | 4 | t (2 rows) someone help me?

2 2

could not using direct lun
by adam_xu＠adagene.com.cn 23 Sep '18

23 Sep '18

Hello, everyone. I'm new here. I have created an ovirt last week. Version 4.2.6. there are 3 ovirt node hosts in that cluster. the engine is self-hosted. Everything works OK, but I can not create virtual disk using direct lun. When I click storage > disk > new, and select direct lun tab, select storage type :"Fibre Channel", it can find the lun id, but the id is grey, and when I click the lun id, I can not click OK to save the Virtual Disk. I'm using a HPE 3PAR storage device and have granted access to all the 3 hosts in that cluster. Is there any mistake in my step? yours Adam

3 7

Re: Hosted Engine Upgrades
by Gary Pedretty 21 Sep '18

21 Sep '18

Ok that is what I have done in the past, sometimes it works, sometimes the engine ends up corrupted and I have had to re-deploy it. thanks Gary __________________ > On Sep 20, 2018, at 1:48 AM, Jayme <jaymef(a)gmail.com> wrote: > > Upgrading the engine is fairly straight forward. What I do is place the cluster in global maintenance mode. Then on the engine vm yum update Ovirt packages then run engine-upgrade. After upgrade I do a general yum update on engine vm to update other non Ovirt packages > > On Thu, Sep 20, 2018, 4:07 AM Gary Pedretty, <gary(a)flyravn.com> wrote: > What is the official recommended method in a Hosted Engine Data Center/Cluster to upgrade the hosted_engine VM. Applying the updates on the individual hosts is pretty straight forward using either the GUI or just running yum update on each host once they are in maintenance mode. But what about the engine? This is an engine vm that was created from the appliance rpm initially. The documentation seems to skip over applying the periodic updates except to the individual hosts. > > Thanks > > Gary > > __________________ > > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/FTHSBZ6L6K6WP…

3 3

Cannot upgrade engine using hosted-engine --upgrade
by Callum Smith 21 Sep '18

21 Sep '18

I get a weird error, something to do with the version 4.2, which should be fine!? --== VM CONFIGURATION ==-- The following appliance have been found on your system: [1] - The oVirt Engine Appliance image (OVA) - 4.2-20180903.1.el7 [2] - Directly select an OVA file Please select an appliance (1, 2) [1]: [ INFO ] Verifying its sha1sum [ INFO ] Checking OVF archive content (could take a few minutes depending on archive size) [ INFO ] Checking OVF XML content (could take a few minutes depending on archive size) Please specify the size of the VM disk in GiB: [50]: [ INFO ] Connecting to Engine [ INFO ] The hosted-engine storage domain has enough free space to contain a new backup disk. [ INFO ] Checking version requirements [ INFO ] Checking metadata area [ INFO ] Hosted-engine configuration is at a compatible level [ INFO ] Connecting to Engine [ ERROR ] Cluster Default is at version 4.2 which is not supported by this upgrade flow. Please fix it before upgrading. [ ERROR ] Failed to execute stage 'Environment customization': Unsupported cluster level [ INFO ] Stage: Clean up [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20180920145828.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Hosted Engine upgrade failed Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20180920145733-doc2cu.log Any ideas on this, attached full logs for detail. Regards, Callum -- Callum Smith Research Computing Core Wellcome Trust Centre for Human Genetics University of Oxford e. callum(a)well.ox.ac.uk<mailto:callum@well.ox.ac.uk>

3 2

VM create fails.
by Hari Gowtham 21 Sep '18

21 Sep '18

Hi, After the upgrade of hosted engine to 4.1, the users are not able to create new VMs, its throwing an error saying user is not a consumer of the quota. But the user is associated with the quota and has been consuming it until the upgrade was done. The error log from the log message: 2018-09-20 12:23:51,702+05 INFO [org.ovirt.engine.core.bll.AddVmCommand] (default task-51) [c1127c2a-29df-456e-825c-878dffac639a] No permission found for user '6933cd13-ecf8-40f7-a54c-4a81d6b71941' or one of th e groups he is member of, when running action 'AddVm', Required permissions are: Action type: 'USER' Action group: 'CONSUME_QUOTA' Object type: 'Quota' Object ID: '5970bb97-02ee-02f0-00eb-0000000002ce'. We have created a quota for each user and in the older version, the users had the ability to set their quota to consume. But with the upgrade the users don't have the ability to select the quota they want to consume. We expect this might be were the bug is related to. Need help to proceed with this. -- Regards, Hari Gowtham.

1 0

Extend hosted engine disk size
by Roderick Mooi 21 Sep '18

21 Sep '18

2 5

Hosted Engine Upgrades
by Gary Pedretty 21 Sep '18

21 Sep '18

What is the official recommended method in a Hosted Engine Data Center/Cluster to upgrade the hosted_engine VM. Applying the updates on the individual hosts is pretty straight forward using either the GUI or just running yum update on each host once they are in maintenance mode. But what about the engine? This is an engine vm that was created from the appliance rpm initially. The documentation seems to skip over applying the periodic updates except to the individual hosts. Thanks Gary __________________

3 2

lack feture of ovirt
by adam_xu＠adagene.com.cn 21 Sep '18

21 Sep '18

Hi, everyone. Is it possible to create a vHBA for a vm in ovirt cluster ? I once created a vHBA for a vm when I was using a standalone KVM server. the vm works very well and has connected to a FCP storage. I didn't find any feture in ovirt that support creating vHBA. could any one tell me why ovirt didn't support vHBA, is there any limit of that feture? thanks. yours Adam

3 5