- Users - oVirt List Archives

Hardering oVirt Engine
by Punaatua PK 19 Jun '18

19 Jun '18

Hello, we are subject to PCI-DSS. I have some questions. We currently have setup oVirt in our environnement. We created 2 Datacenter. - one with a cluster with hosted engine on gluster (Hyperconverged env) which represents the "LAN" part - one with a cluster with gluster storage wich is the DMZ In PCI-DSS we have to secure communication (use HTTPs as much as possible). I did saw that ovirt-ha-agent (on hosted-engine capable host) check the status of the engine by sending GET request on the hosted-engine on port 80 (the same check that hosted-engine --vm-status did in fact). Since ovirt 4.2.2, with the introduction of gluster eventing, a new flow (HTTP post resquest) is needed from gluster nodes to the engine. (In my case, it's a flow from the DMZ to the LAN part in HTTP (non secure) Here is my question. Is it possible to "hardering" this part of the engine ? Another question out of PCI scope. Events like warning and error in the dashboard are clean each days. I tried to find which process did that (look into /etc/cron.daily, root crontab, etc) on the engine without succes. Is there any maintenance task that is run periodicaly ? Could we have the list of all the engine's task ? (regulary check the status of host, vm, storage) also the frequency ? I would appreciate the help. (Great great product ovirt !) Thank you for your jobs ! We did manage KVM hypervisor as standalone machine without all the power that libvirt provides. No need to spend lot of money into licencing product (VSphere and co)

2 3

Re: Ovirt + Gluster : How do I gain access to the file systems of the VMs
by Hanson Turner 19 Jun '18

19 Jun '18

Hi Guys, I've an answer... Here's how I did it... First, I needed kpartx ... so #apt-get install kpartx Then setup a loopback device for the raw hdd image #losetup /dev/loop4 [IMAGE FILE] #kpartx -a /dev/loop4 This allowed me to mount the various partitions included in the VM. There you can modify the configs, make backups etc. Thanks, Hanson On 06/19/2018 09:31 AM, Hanson Turner wrote: > > Hi Sahina, > > Thanks for your reply, I can copy the files off without issue. Using > either a remote mount gluster, or just use the node and scp the files > to where I want them. > > I was asking how to/do I mount the VM's disk in a way to be able to > pull/modify files that are on the HDD of the VM. > > Thanks, > > Hason > > > On 06/19/2018 05:02 AM, Sahina Bose wrote: >> >> >> On Mon, Jun 18, 2018 at 5:12 PM, Hanson Turner >> <hanson(a)andrewswireless.net <mailto:hanson@andrewswireless.net>> wrote: >> >> Hi Guys, >> >> My engine has corrupted, and while waiting for help, I'd like to >> see if I can pull some data off the VM's to re purpose back onto >> dedicated hardware. >> >> Our setup is/was a gluster based storage system for VM's. The >> gluster data storage I'm assuming is okay, I think the hosted >> engine is hosed, and needs restored, but that's another thread. >> >> I can copy the raw disk file off of the gluster data domain. >> What's the best way to mount it short of importing it into >> another gluster domain? >> >> With vmware, we can grab the disk file and move it from server to >> server without issue. You can mount and explore contents with >> workstation. >> >> >> If you want to copy the image file. you can mount the gluster volume >> and copy it. >> using mount -t glusterfs <gluster-server>:/<volumename> <path-to-mount> >> >> >> What do we have available to us for ovirt? >> >> Thanks, >> >> _______________________________________________ >> Users mailing list -- users(a)ovirt.org <mailto:users@ovirt.org> >> To unsubscribe send an email to users-leave(a)ovirt.org >> <mailto:users-leave@ovirt.org> >> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >> <https://www.ovirt.org/site/privacy-policy/> >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> <https://www.ovirt.org/community/about/community-guidelines/> >> List Archives: >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/2AF5K2JERYH63… >> <https://lists.ovirt.org/archives/list/users@ovirt.org/message/2AF5K2JERYH63…> >> >> >

2 1

General failure
by nicolas＠devels.es 19 Jun '18

19 Jun '18

Hi, We're running oVirt 4.1.9 (we cannot upgrade at this time) and we're having a major problem in our infrastructure. On friday, a snapshots were automatically created on more than 200 VMs and as this was just a test task, all of them were deleted at the same time, which seems to have corrupted several VMs. When trying to delete a snapshot on some of the VMs, a "General error" is thrown with a NullPointerException in the engine log (attached). But the worst part is that when some of these machines is powered off and then powered on, the VMs are corrupt... VM myvm is down with error. Exit message: Bad volume specification {u'index': 0, u'domainID': u'110ea376-d789-40a1-b9f6-6b40c31afe01', 'reqsize': '0', u'format': u'cow', u'bootOrder': u'1', u'address': {u'function': u'0x0', u'bus': u'0x00', u'domain': u'0x0000', u'type': u'pci', u'slot': u'0x06'}, u'volumeID': u'1fd0f9aa-6505-45d2-a17e-859bd5dd4290', 'apparentsize': '23622320128', u'imageID': u'65519220-68e1-462a-99b3-f0763c78eae2', u'discard': False, u'specParams': {}, u'readonly': u'false', u'iface': u'virtio', u'optional': u'false', u'deviceId': u'65519220-68e1-462a-99b3-f0763c78eae2', 'truesize': '23622320128', u'poolID': u'75bf8f48-970f-42bc-8596-f8ab6efb2b63', u'device': u'disk', u'shared': u'false', u'propagateErrors': u'off', u'type': u'disk'}. We're really frustrated by now and don't know how to procceed... We have a DB backup (with engine-backup) from thursday which would have a "sane" DB definition without all the snapshots, as they were all created on friday. Would it be safe to restore this backup? Any help is really appreciated... Thanks.

4 15

Unable to start Ovirt engine
by Deekshith 19 Jun '18

19 Jun '18

Hi Team Please anyone help me to solve this issue.

3 4

glusterfs-fuse consuming large amounts of ram
by Edward Clay 19 Jun '18

19 Jun '18

It looks like we are experiencing a bug in the version of glusterfs included with ovirt 4.2.3. It looks like glusterfs 3.12.x has an issue where it consumes large amounts of ram which has caused our HV report storage errors and pause VMs. https://bugzilla.redhat.com/show_bug.cgi?id=1496379 Is there a safe way to get glusterfs-fuse v3.13.x installed with ovirt 4.2.3 or do we have to live with this issue until future updates to ovirt/glusterfs are released? $ ssh hv1.domain.com "sudo grep glusterfs /var/log/messages-* | grep -i kill " /var/log/messages-20180610:Jun 6 13:49:54 hv1 kernel: Out of memory: Kill process 15353 (glusterfs) score 630 or sacrifice child /var/log/messages-20180610:Jun 6 13:49:54 hv1 kernel: Killed process 15353 (glusterfs) total-vm:33800604kB, anon-rss:31896632kB, file-rss:840kB, shmem-rss:0kB /var/log/messages-20180617:Jun 17 00:24:16 hv1 kernel: Out of memory: Kill process 4072 (glusterfs) score 678 or sacrifice child /var/log/messages-20180617:Jun 17 00:24:16 hv1 kernel: Killed process 4072 (glusterfs) total-vm:36159900kB, anon-rss:34338508kB, file-rss:888kB, shmem-rss:0kB We see this same issue occur on all hv in our cluster. Edward Clay Systems Administrator The Hut Group<http://www.thehutgroup.com/> Tel: Email: edward.clay(a)uk2group.com<mailto:edward.clay@uk2group.com> For the purposes of this email, the "company" means The Hut Group Limited, a company registered in England and Wales (company number 6539496) whose registered office is at Fifth Floor, Voyager House, Chicago Avenue, Manchester Airport, M90 3DQ and/or any of its respective subsidiaries. Confidentiality Notice This e-mail is confidential and intended for the use of the named recipient only. If you are not the intended recipient please notify us by telephone immediately on +44(0)1606 811888 or return it to us by e-mail. Please then delete it from your system and note that any use, dissemination, forwarding, printing or copying is strictly prohibited. Any views or opinions are solely those of the author and do not necessarily represent those of the company. Encryptions and Viruses Please note that this e-mail and any attachments have not been encrypted. They may therefore be liable to be compromised. Please also note that it is your responsibility to scan this e-mail and any attachments for viruses. We do not, to the extent permitted by law, accept any liability (whether in contract, negligence or otherwise) for any virus infection and/or external compromise of security and/or confidentiality in relation to transmissions sent by e-mail. Monitoring Activity and use of the company's systems is monitored to secure its effective use and operation and for other lawful business purposes. Communications using these systems will also be monitored and may be recorded to secure effective use and operation and for other lawful business purposes. hgvyjuv

3 2

Slow on deleting file in VM with gluster as storage
by nha.pham 19 Jun '18

19 Jun '18

Hi all, I had an issue with delete file in VM. I used Ovirt with Gluster as Storage. I create new VM is fast, install everything is fast, also create and copy file. But when I delete large number of file in VM, it really slow. OS in VM is windows server 2012 r2. Ovirt 4.2.3 Gluster 3.12.9 Could you please help me on this case. Thanks.

2 1

Ovirt + Gluster : How do I gain access to the file systems of the VMs
by Hanson Turner 19 Jun '18

19 Jun '18

Hi Guys, My engine has corrupted, and while waiting for help, I'd like to see if I can pull some data off the VM's to re purpose back onto dedicated hardware. Our setup is/was a gluster based storage system for VM's. The gluster data storage I'm assuming is okay, I think the hosted engine is hosed, and needs restored, but that's another thread. I can copy the raw disk file off of the gluster data domain. What's the best way to mount it short of importing it into another gluster domain? With vmware, we can grab the disk file and move it from server to server without issue. You can mount and explore contents with workstation. What do we have available to us for ovirt? Thanks,

2 1

glusterfs backup-volfile-servers lost
by g.vasilopoulos＠uoc.gr 19 Jun '18

19 Jun '18

I have a 4 node setup (centos 7) with hosted engine on glusterfs (replica 3 arbiter1). Gluster fs is like this ohost01 104G brick (real data) ohost02 104g brick (real data) ohost04 104g brick (arbiter) ohost05 104g partition used as nfs-storage. hosted engine is on gluster. I also have an fc domain of 3,6 TB mount of gluster is like this storage=172.16.224.10:/engine mnt_options=backup-volfile-servers=172.16.224.11:172.16.224.13 172.16.224.10 is ohost01 storage network 172.16.224.12 is ohost02 storage network 172.16.224.13 is ohost04 storage network Today I upgraded all nodes. I did it like this: hosted-engine was running on ohost05 at the time Put ohost04 (arbiter) on maintenance and did upgrade (ok) Same with ohost02 Ohost01 was spm so I did ohost05 spm then put ohost01 on maintenance and then upgraded it. I notticed that engine VM paused during the process (which usualy does not happen) as I have backup-volfile-servers mount option. But today I notticed that this option is ignored. On the hosts I also noted that mount is like this 172.16.224.10:/engine on /rhev/data-center/mnt/glusterSD/172.16.224.10:_engine type fuse.glusterfs (rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072) so reduduncy is gone from gluster and I cannot figure out why. If I restart ohost01 (after maintenance) hosted engine get paused until ohost01 comes back up. How can I solve this issue

2 6

Lost host after upgrade/reboot
by Nicolas Ecarnot 19 Jun '18

19 Jun '18

Hello, TL;DR : engine stops talking with rebooted host. [oVirt 4.2.3.5-1.el7.centos] - From the web gui, upgrading a host, allowing the reboot checkbox checked - upgrade is OK (/var/log/yum.log is showing successful updates + the Ansible host deploy log is also OK) - reboot is OK (clean, SSH OK...) - the host eventually appears as "Install failed" - the engine.log is telling : > 2018-06-19 10:02:24,896+02 ERROR > [org.ovirt.engine.core.bll.SshHostRebootCommand] > (EE-ManagedThreadFactory-commandCoordinator-Thread-7) [6e32b3ac] SSH > reboot command failed on host 'serv-hv-prds06': SSH session timeout > host 'root@ serv-hv-prds06' Stdout: Stderr: 2018-06-19 > 10:02:25,028+02 ERROR > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > (EE-ManagedThreadFactory-commandCoordinator-Thread-7) [6e32b3ac] > EVENT_ID: SYSTEM_FAILED_SSH_HOST_RESTART(198), A restart usin g SSH > initiated by the engine to Host serv-hv-prds06 has failed. 2018-06-19 > 10:02:25,185+02 INFO > [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] > (EE-ManagedThreadFactory-commandCoordinator-Thread-7) [6e32b3ac] > START, SetVdsStatusVDSCommand(HostName = serv-hv-prds06, > SetVdsStatusVDSCom > mandParameters:{hostId='9c1566a4-8432-4de6-b30d-fd3b8e5fafca', > status='InstallFailed', nonOperationalReason='NONE', > stopSpmFailureLogged='false', maintenanceReason='null'}), log id: > 833f9bd 2018-06-19 10:02:25,191+02 INFO > [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] > (EE-ManagedThreadFactory-commandCoordinator-Thread-7) [6e32b3ac] > FINISH, SetVdsStatusVDSCommand, log id: 833f9bd 2018-06-19 > 10:02:25,191+02 ERROR > [org.ovirt.engine.core.bll.hostdeploy.UpgradeHostInternalCommand] > (EE-ManagedThreadFactory-commandCoordinator-Thread-7) [6e32b3ac] > Engine failed to restart via ssh host 'serv-hv-prds06' ('9c1566a4- > 8432-4de6-b30d-fd3b8e5fafca') after upgrade 2018-06-19 > 10:02:25,256+02 ERROR > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > (EE-ManagedThreadFactory-commandCoordinator-Thread-7) > [8b7c6e7d-1a22-407c-818b-849e67b94051] EVENT_ID: > HOST_UPGRADE_FAILED(841 ), Failed to upgrade Host serv-hv-prds06 > (User: necarnot@sdis.isere.fr@SDIS38-authz). 2018-06-19 > 10:02:30,755+02 ERROR > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > (EE-ManagedThreadFactory-engineScheduled-Thread-69) > [8b7c6e7d-1a22-407c-818b-849e67b94051] EVENT_ID: > HOST_UPGRADE_FAILED(841), Failed to upgrade Host serv-hv-prds06 > (User: necarnot@sdis.isere.fr@SDIS38-authz). - Manually activating the host puts it back on track without issue The usual SSH communications between the engine and the host are usually very sound (VM migrations, maintenance...). On this oVirt DC, I reproduced this issue twice on 2 different hosts. In this engine log above, you see that I'm using my account to manage this engine, as I 'm doing for years with no issue. I'll try the exact same path with admin@internal to see what could change, but I don't see the link. What other logs could I give you to debug this? Regards, -- Nicolas ECARNOT

1 1

oVirt Node 4.1 at www.ovirt.org/node/ is 404
by clam2718＠gmail.com 19 Jun '18

19 Jun '18

I am trying to download Node 4.1 from https://www.ovirt.org/node but am receiving a 404 error. Is there an alternative link to try for the latest stable release? Thanks, Charles

3 2