- Users - oVirt List Archives

Re: hosted engine setup error
by dhy336＠sina.com 27 May '18

27 May '18

hi Yanirthis is my vdsm.log vdsm run prepareForShutdown lead to engine VM shudown? why shutdown engine VM,when deploy hosted engine? thanks 2018-05-27 18:24:16,020+0800 INFO (MainThread) [vds] Received signal 15, shutting down (vdsmd:67)2018-05-27 18:24:21,028+0800 INFO (MainThread) [jsonrpc.JsonRpcServer] Stopping JsonRPC Server (__init__:703)2018-05-27 18:24:21,030+0800 INFO (MainThread) [vds] Stopping http server (http:79)2018-05-27 18:24:21,030+0800 INFO (http) [vds] Server stopped (http:69)2018-05-27 18:24:21,031+0800 INFO (MainThread) [root] Unregistering all secrets (secret:91)2018-05-27 18:24:21,031+0800 INFO (MainThread) [vds] Stopping QEMU-GA poller (qemuguestagent:116)2018-05-27 18:24:21,032+0800 INFO (MainThread) [vdsm.api] START prepareForShutdown(options=None) from=internal, task_id=d3137135-e4f8-44ef-ac4c-d1687606fb02 (api:46)2018-05-27 18:24:21,094+0800 INFO (MainThread) [storage.Monitor] Shutting down domain monitors (monitor:222)2018-05-27 18:24:21,094+0800 INFO (MainThread) [storage.check] Stopping check service (check:104)2018-05-27 18:24:21,094+0800 INFO (check/loop) [storage.asyncevent] Stopping <EventLoop running=True closed=False at 0x43126736> (asyncevent:220) ----- Original Message ----- From: <dhy336(a)sina.com> To: "Yanir Quinn" <yquinn(a)redhat.com> Cc: users <users(a)ovirt.org> Subject: [ovirt-users] Re: hosted engine setup error Date: 2018-05-27 18:51 thanks, I find when hosted-engine -deloy run [Get ovirtmgmt route table id], my engine VM is shutdown,and /var/log/message show my engine vm is powered down by guest-shutdown,[ INFO ] TASK [Get ovirtmgmt route table id][ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "ip rule list | grep ovirtmgmt | sed s/\\\\[.*\\\\]\\ //g | awk '{ print $9 }'", "delta": "0:00:00.004175", "end": "2018-05-26 17:41:11.892218", "rc": 0, "start": "2018-05-26 17:41:11.888043", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []}[ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook[ INFO ] Stage: Clean up[ INFO ] Cleaning temporary resources[ INFO ] TASK [Gathering Facts][ INFO ] ok: [localhost][ INFO ] TASK [Remove local vm dir] /var/log/message May 26 09:32:23 engine systemd: Reloading.May 26 09:32:24 engine python: ansible-file Invoked with directory_mode=None force=False remote_src=None path=/root/heanswers.conf owner=None follow=False group=None unsafe_writes=None state=absent content=NOT_LOGGING_PARAMETER serole=None diff_peek=None setype=None selevel=None original_basename=None regexp=None validate=None src=None seuser=None recurse=False delimiter=None mode=None attributes=None backup=NoneMay 26 09:32:38 engine systemd-logind: Removed session 3.May 26 09:32:48 engine qemu-ga: info: guest-shutdown called, mode: powerdownMay 26 09:32:48 engine systemd: Started Delayed Shutdown Service.May 26 09:32:48 engine systemd: Starting Delayed Shutdown Service...May 26 09:32:48 engine systemd-shutdownd: Shutting down at Sat 2018-05-26 17:32:48 CST (poweroff)...May 26 09:32:48 engine systemd-shutdownd: Creating /run/nologin, blocking further logins...May 26 09:32:48 engine systemd: Stopping QEMU Guest Agent...May 26 09:32:48 engine systemd: Stopping Session 1 of user root.May 26 09:32:48 engine systemd: Stopped target Multi-User System.May 26 09:32:48 engine systemd: Stopping Multi-User System.May 26 09:32:48 engine systemd: Stopped Execute cloud user/final scripts.May 26 09:32:48 engine systemd: Stopping Execute cloud user/final scripts...May 26 09:32:48 engine systemd: Stopping oVirt Engine...May 26 09:32:48 engine sshd[24523]: Received signal 15; terminating.May 26 09:32:48 engine systemd: Stopping OpenSSH server daemon...May 26 09:32:48 engine systemd: Stopping The Apache HTTP Server...----- Original Message ----- From: Yanir Quinn <yquinn(a)redhat.com> To: dhy336(a)sina.com Cc: users <users(a)ovirt.org> Subject: Re: Re: [ovirt-users] hosted engine setup error Date: 2018-05-27 16:46 According to BZ : https://bugzilla.redhat.com/show_bug.cgi?id=1540451#c19you should retry with a newer kernel >= -851 if possible .If you still get the error please provide full setup and vdsm logs. On Fri, May 25, 2018 at 11:54 AM, <dhy336(a)sina.com> wrote: Hi thanks for your reponse, I try to do by your guide, but it is not work. my kernel version is 3.10.0-693.11.1.el7.x86_64.besides, I try to do hosted-engine --deploy in my Virtual machine is work. but it is not work in Physical Machine ----- Original Message ----- From: Yanir Quinn <yquinn(a)redhat.com> To: dhy336(a)sina.com Cc: users <users(a)ovirt.org> Subject: Re: [ovirt-users] hosted engine setup error Date: 2018-05-24 18:35 Hi There is a BZ with a similar issue: https://bugzilla.redhat.com/show_bug.cgi?id=1546839 To sum things up, try stopping the network manager and restarting your network if you are using a RH distribution, e,g. : systemctl stop NetworkManager systemctl restart networkAnd check what is your kernel version. On Wed, May 23, 2018 at 5:03 PM, <dhy336(a)sina.com> wrote: hiI deploy ovirt-engine-4.2.2 hosted-engine by #hosted-engine --deploy, but face some error bridge ovirtmgmt is not configure, i should how to do? thanks [ INFO ] TASK [Get ovirtmgmt route table id][ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "ip rule list | grep ovirtmgmt | sed s/\\\\[.*\\\\]\\ //g | awk '{ print $9 }'", "delta": "0:00:00.010899", "end": "2018-05-23 20:03:21.222559", "rc": 0, "start": "2018-05-23 20:03:21.211660", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []}[ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook[ INFO ] Stage: Clean up[ INFO ] Cleaning temporary resources vdsm.log 2018-05-23 19:55:15,305+0800 INFO (vm/bfc6f7cf) [virt.vm] (vmId='bfc6f7cf-3e8d-4368-97f8-78a5c74a5175') VM wrapper has started (vm:2619)2018-05-23 19:55:15,454+0800 INFO (vm/bfc6f7cf) [virt.vm] (vmId='bfc6f7cf-3e8d-4368-97f8-78a5c74a5175') Starting connection (guestagent:245)2018-05-23 19:55:15,458+0800 ERROR (vm/bfc6f7cf) [virt.vm] (vmId='bfc6f7cf-3e8d-4368-97f8-78a5c74a5175') Failed to connect to guest agent channel (vm:2403)Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2401, in _vmDependentInit self.guestAgent.start() File "/usr/lib/python2.7/site-packages/vdsm/virt/guestagent.py", line 246, in start self._prepare_socket() File "/usr/lib/python2.7/site-packages/vdsm/virt/guestagent.py", line 288, in _prepare_socket supervdsm.getProxy().prepareVmChannel(self._socketName) File "/usr/lib/python2.7/site-packages/vdsm/common/supervdsm.py", line 55, in __call__ return callMethod() File "/usr/lib/python2.7/site-packages/vdsm/common/supervdsm.py", line 53, in <lambda> **kwargs) File "<string>", line 2, in prepareVmChannel File "/usr/lib64/python2.7/multiprocessing/managers.py", line 773, in _callmethod raise convert_to_error(kind, result)OSError: [Errno 2] No such file or directory: '/var/lib/libvirt/qemu/channels/bfc6f7cf-3e8d-4368-97f8-78a5c74a5175.com.redhat.rhevm.vdsm'2018-05-23 19:55:15,480+0800 INFO (vm/bfc6f7cf) [virt.vm] (vmId='bfc6f7cf-3e8d-4368-97f8-78a5c74a5175') CPU running: domain initialization (vm:5908) [root@hosted-engine-test1 ~]# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 52:54:00:6c:ee:a8 brd ff:ff:ff:ff:ff:ff inet 192.168.122.217/24 brd 192.168.122.255 scope global dynamic eth0 valid_lft 2936sec preferred_lft 2936sec inet6 fe80::834a:9cc1:df2:83f/64 scope link valid_lft forever preferred_lft forever18: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 9a:d1:bc:96:cc:c0 brd ff:ff:ff:ff:ff:ff19: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000 link/ether 52:54:00:55:06:26 brd ff:ff:ff:ff:ff:ff inet 192.168.124.1/24 brd 192.168.124.255 scope global virbr0 valid_lft forever preferred_lft forever20: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 1000 link/ether 52:54:00:55:06:26 brd ff:ff:ff:ff:ff:ff _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org

1 0

Re: hosted engine setup error
by dhy336＠sina.com 27 May '18

27 May '18

thanks, I find when hosted-engine -deloy run [Get ovirtmgmt route table id], my engine VM is shutdown,and /var/log/message show my engine vm is powered down by guest-shutdown,[ INFO ] TASK [Get ovirtmgmt route table id][ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "ip rule list | grep ovirtmgmt | sed s/\\\\[.*\\\\]\\ //g | awk '{ print $9 }'", "delta": "0:00:00.004175", "end": "2018-05-26 17:41:11.892218", "rc": 0, "start": "2018-05-26 17:41:11.888043", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []}[ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook[ INFO ] Stage: Clean up[ INFO ] Cleaning temporary resources[ INFO ] TASK [Gathering Facts][ INFO ] ok: [localhost][ INFO ] TASK [Remove local vm dir] /var/log/message May 26 09:32:23 engine systemd: Reloading.May 26 09:32:24 engine python: ansible-file Invoked with directory_mode=None force=False remote_src=None path=/root/heanswers.conf owner=None follow=False group=None unsafe_writes=None state=absent content=NOT_LOGGING_PARAMETER serole=None diff_peek=None setype=None selevel=None original_basename=None regexp=None validate=None src=None seuser=None recurse=False delimiter=None mode=None attributes=None backup=NoneMay 26 09:32:38 engine systemd-logind: Removed session 3.May 26 09:32:48 engine qemu-ga: info: guest-shutdown called, mode: powerdownMay 26 09:32:48 engine systemd: Started Delayed Shutdown Service.May 26 09:32:48 engine systemd: Starting Delayed Shutdown Service...May 26 09:32:48 engine systemd-shutdownd: Shutting down at Sat 2018-05-26 17:32:48 CST (poweroff)...May 26 09:32:48 engine systemd-shutdownd: Creating /run/nologin, blocking further logins...May 26 09:32:48 engine systemd: Stopping QEMU Guest Agent...May 26 09:32:48 engine systemd: Stopping Session 1 of user root.May 26 09:32:48 engine systemd: Stopped target Multi-User System.May 26 09:32:48 engine systemd: Stopping Multi-User System.May 26 09:32:48 engine systemd: Stopped Execute cloud user/final scripts.May 26 09:32:48 engine systemd: Stopping Execute cloud user/final scripts...May 26 09:32:48 engine systemd: Stopping oVirt Engine...May 26 09:32:48 engine sshd[24523]: Received signal 15; terminating.May 26 09:32:48 engine systemd: Stopping OpenSSH server daemon...May 26 09:32:48 engine systemd: Stopping The Apache HTTP Server...----- Original Message ----- From: Yanir Quinn <yquinn(a)redhat.com> To: dhy336(a)sina.com Cc: users <users(a)ovirt.org> Subject: Re: Re: [ovirt-users] hosted engine setup error Date: 2018-05-27 16:46 According to BZ : https://bugzilla.redhat.com/show_bug.cgi?id=1540451#c19you should retry with a newer kernel >= -851 if possible .If you still get the error please provide full setup and vdsm logs. On Fri, May 25, 2018 at 11:54 AM, <dhy336(a)sina.com> wrote: Hi thanks for your reponse, I try to do by your guide, but it is not work. my kernel version is 3.10.0-693.11.1.el7.x86_64.besides, I try to do hosted-engine --deploy in my Virtual machine is work. but it is not work in Physical Machine ----- Original Message ----- From: Yanir Quinn <yquinn(a)redhat.com> To: dhy336(a)sina.com Cc: users <users(a)ovirt.org> Subject: Re: [ovirt-users] hosted engine setup error Date: 2018-05-24 18:35 Hi There is a BZ with a similar issue: https://bugzilla.redhat.com/show_bug.cgi?id=1546839 To sum things up, try stopping the network manager and restarting your network if you are using a RH distribution, e,g. : systemctl stop NetworkManager systemctl restart networkAnd check what is your kernel version. On Wed, May 23, 2018 at 5:03 PM, <dhy336(a)sina.com> wrote: hiI deploy ovirt-engine-4.2.2 hosted-engine by #hosted-engine --deploy, but face some error bridge ovirtmgmt is not configure, i should how to do? thanks [ INFO ] TASK [Get ovirtmgmt route table id][ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "ip rule list | grep ovirtmgmt | sed s/\\\\[.*\\\\]\\ //g | awk '{ print $9 }'", "delta": "0:00:00.010899", "end": "2018-05-23 20:03:21.222559", "rc": 0, "start": "2018-05-23 20:03:21.211660", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []}[ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook[ INFO ] Stage: Clean up[ INFO ] Cleaning temporary resources vdsm.log 2018-05-23 19:55:15,305+0800 INFO (vm/bfc6f7cf) [virt.vm] (vmId='bfc6f7cf-3e8d-4368-97f8-78a5c74a5175') VM wrapper has started (vm:2619)2018-05-23 19:55:15,454+0800 INFO (vm/bfc6f7cf) [virt.vm] (vmId='bfc6f7cf-3e8d-4368-97f8-78a5c74a5175') Starting connection (guestagent:245)2018-05-23 19:55:15,458+0800 ERROR (vm/bfc6f7cf) [virt.vm] (vmId='bfc6f7cf-3e8d-4368-97f8-78a5c74a5175') Failed to connect to guest agent channel (vm:2403)Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2401, in _vmDependentInit self.guestAgent.start() File "/usr/lib/python2.7/site-packages/vdsm/virt/guestagent.py", line 246, in start self._prepare_socket() File "/usr/lib/python2.7/site-packages/vdsm/virt/guestagent.py", line 288, in _prepare_socket supervdsm.getProxy().prepareVmChannel(self._socketName) File "/usr/lib/python2.7/site-packages/vdsm/common/supervdsm.py", line 55, in __call__ return callMethod() File "/usr/lib/python2.7/site-packages/vdsm/common/supervdsm.py", line 53, in <lambda> **kwargs) File "<string>", line 2, in prepareVmChannel File "/usr/lib64/python2.7/multiprocessing/managers.py", line 773, in _callmethod raise convert_to_error(kind, result)OSError: [Errno 2] No such file or directory: '/var/lib/libvirt/qemu/channels/bfc6f7cf-3e8d-4368-97f8-78a5c74a5175.com.redhat.rhevm.vdsm'2018-05-23 19:55:15,480+0800 INFO (vm/bfc6f7cf) [virt.vm] (vmId='bfc6f7cf-3e8d-4368-97f8-78a5c74a5175') CPU running: domain initialization (vm:5908) [root@hosted-engine-test1 ~]# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 52:54:00:6c:ee:a8 brd ff:ff:ff:ff:ff:ff inet 192.168.122.217/24 brd 192.168.122.255 scope global dynamic eth0 valid_lft 2936sec preferred_lft 2936sec inet6 fe80::834a:9cc1:df2:83f/64 scope link valid_lft forever preferred_lft forever18: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 9a:d1:bc:96:cc:c0 brd ff:ff:ff:ff:ff:ff19: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000 link/ether 52:54:00:55:06:26 brd ff:ff:ff:ff:ff:ff inet 192.168.124.1/24 brd 192.168.124.255 scope global virbr0 valid_lft forever preferred_lft forever20: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 1000 link/ether 52:54:00:55:06:26 brd ff:ff:ff:ff:ff:ff _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org

1 0

Re: Need advice using pacemaker on VMs for application HA
by wodel youchi 27 May '18

27 May '18

Hi, Thank you both for your responses, In a conclusion : - Don't mix up several solution that provide HA : - either choose oVirt HA. - or use software HA inside a VM. And since I need to monitor a service inside the VM for HA purpose, the implementation will be : - Create two VMs (nodes) without oVirt HA enabled. - Create the shared storage. - Configure pacemaker with stonith using fence rhev. - Test the configuration and my be try to test a hypervisor crash to see the behavior of the solution. Regards. 2018-05-24 17:12 GMT+01:00 Gianluca Cecchi <gianluca.cecchi(a)gmail.com>: > On Thu, May 24, 2018 at 6:05 PM, Gianluca Cecchi < > gianluca.cecchi(a)gmail.com> wrote: > >> >> >> >>> >>>> - What about the shared storage, we will use a shared disk on oVirt >>>> which does not support snapshot >>>> >>> >>> What is the question? >>> >> >> >> In the past I had to configure a virtual CentOS 6 cluster because I >> needed to replicate a problem I had in a physical production cluster and to >> verify if some actions/updates would have solved the problem. >> I had no more spare hw to configure an so using the poor-man method (dd + >> reconfigure) I had the cluster up and running with two twin nodes identical >> to the physical ones. >> I also opened this bugzilla to backport the el7 package to el6: >> https://bugzilla.redhat.com/show_bug.cgi?id=1446474 >> >> The intracluster network has been put on OVN btw >> >> But honestly I doubt I will use a virtual-cluster software stack to >> provide high availability to production services inside a VM. Too many >> inter-relations >> >> > I didn't complete the answer about storage. > Indeed if the cluster services need also a storage (eg a filesystem), you > should create dedicated virtual disks that you mark as shared and assign to > all the nodes of the virtual-cluster. > This compromise the snapshot functionality (of only the shared disks, you > can snapshot the boot disk and the not shared disks). > > HIH, > Gianluca > >

1 0

Ovirt 4.2.4 upgrade
by Maton, Brett 27 May '18

27 May '18

The 4.2.4 upgrade appears to have a database issue, i'm seeing these errors in the postgresql logs: 2018-05-24 16:27:08.292 UTC ERROR: relation "provider_binding_host_id" does not exist at character 15 2018-05-24 16:27:08.292 UTC QUERY: SELECT 1 FROM provider_binding_host_id WHERE vds_id = v_vds_id FOR UPDATE 2018-05-24 16:27:08.292 UTC CONTEXT: PL/pgSQL function updatehostproviderbinding(uuid,character varying[],character varying[]) line 3 at PERFORM Any suggestions ?

4 6

Re: hosted engine setup error
by dhy336＠sina.com 27 May '18

27 May '18

Hi thanks for your reponse, I try to do by your guide, but it is not work. my kernel version is 3.10.0-693.11.1.el7.x86_64.besides, I try to do hosted-engine --deploy in my Virtual machine is work. but it is not work in Physical Machine ----- Original Message ----- From: Yanir Quinn <yquinn(a)redhat.com> To: dhy336(a)sina.com Cc: users <users(a)ovirt.org> Subject: Re: [ovirt-users] hosted engine setup error Date: 2018-05-24 18:35 Hi There is a BZ with a similar issue: https://bugzilla.redhat.com/show_bug.cgi?id=1546839 To sum things up, try stopping the network manager and restarting your network if you are using a RH distribution, e,g. : systemctl stop NetworkManager systemctl restart networkAnd check what is your kernel version. On Wed, May 23, 2018 at 5:03 PM, <dhy336(a)sina.com> wrote: hiI deploy ovirt-engine-4.2.2 hosted-engine by #hosted-engine --deploy, but face some error bridge ovirtmgmt is not configure, i should how to do? thanks [ INFO ] TASK [Get ovirtmgmt route table id][ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "ip rule list | grep ovirtmgmt | sed s/\\\\[.*\\\\]\\ //g | awk '{ print $9 }'", "delta": "0:00:00.010899", "end": "2018-05-23 20:03:21.222559", "rc": 0, "start": "2018-05-23 20:03:21.211660", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []}[ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook[ INFO ] Stage: Clean up[ INFO ] Cleaning temporary resources vdsm.log 2018-05-23 19:55:15,305+0800 INFO (vm/bfc6f7cf) [virt.vm] (vmId='bfc6f7cf-3e8d-4368-97f8-78a5c74a5175') VM wrapper has started (vm:2619)2018-05-23 19:55:15,454+0800 INFO (vm/bfc6f7cf) [virt.vm] (vmId='bfc6f7cf-3e8d-4368-97f8-78a5c74a5175') Starting connection (guestagent:245)2018-05-23 19:55:15,458+0800 ERROR (vm/bfc6f7cf) [virt.vm] (vmId='bfc6f7cf-3e8d-4368-97f8-78a5c74a5175') Failed to connect to guest agent channel (vm:2403)Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2401, in _vmDependentInit self.guestAgent.start() File "/usr/lib/python2.7/site-packages/vdsm/virt/guestagent.py", line 246, in start self._prepare_socket() File "/usr/lib/python2.7/site-packages/vdsm/virt/guestagent.py", line 288, in _prepare_socket supervdsm.getProxy().prepareVmChannel(self._socketName) File "/usr/lib/python2.7/site-packages/vdsm/common/supervdsm.py", line 55, in __call__ return callMethod() File "/usr/lib/python2.7/site-packages/vdsm/common/supervdsm.py", line 53, in <lambda> **kwargs) File "<string>", line 2, in prepareVmChannel File "/usr/lib64/python2.7/multiprocessing/managers.py", line 773, in _callmethod raise convert_to_error(kind, result)OSError: [Errno 2] No such file or directory: '/var/lib/libvirt/qemu/channels/bfc6f7cf-3e8d-4368-97f8-78a5c74a5175.com.redhat.rhevm.vdsm'2018-05-23 19:55:15,480+0800 INFO (vm/bfc6f7cf) [virt.vm] (vmId='bfc6f7cf-3e8d-4368-97f8-78a5c74a5175') CPU running: domain initialization (vm:5908) [root@hosted-engine-test1 ~]# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 52:54:00:6c:ee:a8 brd ff:ff:ff:ff:ff:ff inet 192.168.122.217/24 brd 192.168.122.255 scope global dynamic eth0 valid_lft 2936sec preferred_lft 2936sec inet6 fe80::834a:9cc1:df2:83f/64 scope link valid_lft forever preferred_lft forever18: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 9a:d1:bc:96:cc:c0 brd ff:ff:ff:ff:ff:ff19: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000 link/ether 52:54:00:55:06:26 brd ff:ff:ff:ff:ff:ff inet 192.168.124.1/24 brd 192.168.124.255 scope global virbr0 valid_lft forever preferred_lft forever20: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 1000 link/ether 52:54:00:55:06:26 brd ff:ff:ff:ff:ff:ff _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org

2 1

Upload Image Error
by Peter Harman 26 May '18

26 May '18

Ovirt Users, I am running into a strange problem with uploading images through the webUI. When I test the connection on an upload I get “Connection to ovirt-imageio-proxy service has failed. Make sure the service is installed, configured, and ovirt-engine certificate is registered as a valid CA in the browser.” I have conducted this operation on several computers using both chrome and firefox and ensuring the certs were loaded into the browsers. I went to this page: https://ovirt.org/develop/release-management/features/infra/pki/ to find cert info and checked both the engine and hosts for the certificates and the identity of the certificates - everything seemed to match up. Next thing I looked at was the ovirt-imageio-proxy service. I checked it and restarted it below is a status output from one of the failed operations: [root@hpm-engine ~]# systemctl status ovirt-imageio-proxy ● ovirt-imageio-proxy.service - oVirt ImageIO Proxy Loaded: loaded (/usr/lib/systemd/system/ovirt-imageio-proxy.service; enabled; vendor preset: disabled) Active: active (running) since Thu 2018-05-24 13:25:38 CDT; 1h 13min ago Main PID: 21239 (ovirt-imageio-p) Tasks: 2 CGroup: /system.slice/ovirt-imageio-proxy.service └─21239 /usr/bin/python /usr/bin/ovirt-imageio-proxy May 24 13:25:38 hpm-engine.server.local systemd[1]: Starting oVirt ImageIO Proxy... May 24 13:25:38 hpm-engine.server.local systemd[1]: Started oVirt ImageIO Proxy. May 24 14:38:02 hpm-engine.server.local ovirt-imageio-proxy[21239]: 127.0.0.1 - - [24/May/2018 14:38:02] "PUT /tickets/ HTTP/1.1" 200 0 ovirt-imageio-proxy service seems to check out. So, next step was checking out VDSM process output is below (NOTE: I redacted a bunch of unrelated warnings): [root@mothership ~]# systemctl status vdsmd -l ● vdsmd.service - Virtual Desktop Server Manager Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled; vendor preset: enabled) Active: active (running) since Thu 2018-05-24 08:12:40 CDT; 6h ago Main PID: 3359 (vdsmd) Tasks: 58 CGroup: /system.slice/vdsmd.service ├─3359 /usr/bin/python2 /usr/share/vdsm/vdsmd └─6731 /usr/libexec/ioprocess --read-pipe-fd 68 --write-pipe-fd 67 --max-threads 10 --max-queued-requests 10 So VDSM doesn’t seem to be the issue. I changed a few settings here and there but mostly forget what I did (I changed it all back to defult) Some background information - I am using /etc/hosts for all the FQDN components - which seems to be working well. I checked the times to be sure the time matched up (I know this important for some security related issues.) In a somewhat funny note I disabled SSL on VDSM in one attempt at the issue and now know why you should not do that when engine is using SSL. Any help is appreciated. I am learning a lot and really thank everyone who develops Ovirt - it’s awesome. Peter Harman - Systems and Safety Cordinator | Homeyer Precision Manufacturing [Description: C:\Users\gruether\AppData\Local\Temp\Temp1_Homeyer Logo (2).zip\Homeyer Logo\Homeyer Logo.jpg] 16051 State Hwy 47, Marthasville, MO 63357| E pharman(a)homeyertool.com |<mailto:pharman@homeyertool.com%20%7C> P 636.433.2244 | F 636.433.5257

3 3

Failing to install self hosted engine - 4.2.4
by Maton, Brett 26 May '18

26 May '18

Hi, I can't see in the log what the problem is, I expect it's something simple though... Hoping that someone can see what the problem is. engine setup log attached. Regards, Brett

2 1

Re: Fwd: FreeBSD after 10.3 could not boot (Freeze)
by Karli Sjöberg 26 May '18

26 May '18

1 0

hosted engine deploy failed , engine vm is shudown
by dhy336＠sina.com 26 May '18

26 May '18

Hi I deploy hosted engine face some errors.[ INFO ] TASK [Get ovirtmgmt route table id][ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "ip rule list | grep ovirtmgmt | sed s/\\\\[.*\\\\]\\ //g | awk '{ print $9 }'", "delta": "0:00:00.004175", "end": "2018-05-26 17:41:11.892218", "rc": 0, "start": "2018-05-26 17:41:11.888043", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []}[ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook[ INFO ] Stage: Clean up[ INFO ] Cleaning temporary resources[ INFO ] TASK [Gathering Facts][ INFO ] ok: [localhost][ INFO ] TASK [Remove local vm dir] I find when hosted-engine -deloy run [Get ovirtmgmt route table id], my enginen VM is shutdown,and /var/log/message show my engine vm is powered down by guest-shutdown, May 26 09:32:23 engine systemd: Reloading.May 26 09:32:24 engine python: ansible-file Invoked with directory_mode=None force=False remote_src=None path=/root/heanswers.conf owner=None follow=False group=None unsafe_writes=None state=absent content=NOT_LOGGING_PARAMETER serole=None diff_peek=None setype=None selevel=None original_basename=None regexp=None validate=None src=None seuser=None recurse=False delimiter=None mode=None attributes=None backup=NoneMay 26 09:32:38 engine systemd-logind: Removed session 3.May 26 09:32:48 engine qemu-ga: info: guest-shutdown called, mode: powerdownMay 26 09:32:48 engine systemd: Started Delayed Shutdown Service.May 26 09:32:48 engine systemd: Starting Delayed Shutdown Service...May 26 09:32:48 engine systemd-shutdownd: Shutting down at Sat 2018-05-26 17:32:48 CST (poweroff)...May 26 09:32:48 engine systemd-shutdownd: Creating /run/nologin, blocking further logins...May 26 09:32:48 engine systemd: Stopping QEMU Guest Agent...May 26 09:32:48 engine systemd: Stopping Session 1 of user root.May 26 09:32:48 engine systemd: Stopped target Multi-User System.May 26 09:32:48 engine systemd: Stopping Multi-User System.May 26 09:32:48 engine systemd: Stopped Execute cloud user/final scripts.May 26 09:32:48 engine systemd: Stopping Execute cloud user/final scripts...May 26 09:32:48 engine systemd: Stopping oVirt Engine...May 26 09:32:48 engine sshd[24523]: Received signal 15; terminating.May 26 09:32:48 engine systemd: Stopping OpenSSH server daemon...May 26 09:32:48 engine systemd: Stopping The Apache HTTP Server...

1 0

Problems with configuring ovirt and neotron network integration
by Pym 25 May '18

25 May '18

Hi: Environmental information： 4.2.0 ovirt version, according to "https://www.ovirt.org/documentation/how-to/networking/overlay-networks-with…" document of it services. Both services are accessible from the browser. After the above environment is configured according to the document, I need to execute the following command "engine-config --set keyauthstoneurl =http://< host-fqdn >:35357/v2.0" on the ovirt-engine side. The following information appears: "Error setting KeystoneAuthUrl's value. No such entry." When I execute "engine-config-a | grep-i 'KeystoneAuthUrl'", there is no return value, and there is no such configuration item in the current version of ovirt. Now how do I proceed next? Thanks！

1 0