- Users - oVirt List Archives

Hosted Engine and network isolation
by Luca 'remix_tj' Lorenzetto 10 Jan '18

10 Jan '18

Hello, i just completed the setup of my 4.1 new cluster and i'm validating against a set of certification tests i did in the earlier version. One of the test was consisting on isolating the host where hosted-engine vm is running, setting ports on the switch down. Storage domain hosting the engine is FC. Up to 4.0.4, that was the version we was using during that tests, isolating the host was causing a restart of the engine vm on another available host with the fence of the isolated host. Now, with 4.1.8, isolating the host doesn't restart the engine on the other host, only moves the status of the host2 to EngineUnexpectedlyDown, while host1 is isolated, with the engine vm still running on it. Is this due to storage leases? What should be the right action to take in case of isolated host for moving engine away? Thank you, Luca -- "E' assurdo impiegare gli uomini di intelligenza eccellente per fare calcoli che potrebbero essere affidati a chiunque se si usassero delle macchine" Gottfried Wilhelm von Leibnitz, Filosofo e Matematico (1646-1716) "Internet è la più grande biblioteca del mondo. Ma il problema è che i libri sono tutti sparsi sul pavimento" John Allen Paulos, Matematico (1945-vivente) Luca 'remix_tj' Lorenzetto, http://www.remixtj.net , <lorenzetto.luca(a)gmail.com>

1 0

Planned restart of production services
by Evgheni Dereveanchin 10 Jan '18

10 Jan '18

Hi everyone, I will be restarting several production systems within the following hour to apply security updates. The following services may be unreachable for some period of time: - resources.ovirt.org - package repositories - gerrit.ovirt.org - code review - jenkins.ovirt.org - CI master It will not be possible to submit/review patches, clone repositories or run CI jobs during this period. Package repositories will also be unreachable for a short period of time. I will announce you once the maintenance is complete. -- Regards, Evgheni Dereveanchin

1 2

oVirt 4.2 CEPH support
by Abdurrahman A. Ibrahim 09 Jan '18

09 Jan '18

Hello, I read in RHV 4.2 Beta release note that CEPH will be supported using iSCSI. I have tried to check community documentation regarding CEPH support but there was no luck. Do we have such document? Best regards, Ab

9 11

ovirt 4.2 upgrade questions
by Peter Hudec 09 Jan '18

09 Jan '18

Hi, maybe it was already here, but I haven't found it quickly in archive ;( I upgrade the hosted engine and one hots, my notes and questions. The upgrade goes well, I only needed to manually fix the memy value in database for hosted engine [ ERROR ] schema.sh: FATAL: Cannot execute sql command: --file=/usr/share/ovirt-engine/dbscripts/upgrade/04_02_0140_add_max_memory_constraint.sql [ ERROR ] Failed to execute stage 'Misc configuration': Engine schema refresh failed 1) firewalld after upgrade the hot server, the i needed to stop firewalld. It seems, that, the rules are not generated correctly. The engine was not able to connect to the host. How do I could fix it? 2) old repo removal Could i remove the 4.1 repo? If yes, what is the best way to do that? 3) Hosted Engine HA: Hosted Engine HA on upgraded hosts is 3400, the same as on the 4.1 hosts. Is this good or bad? regards Peter -- *Peter Hudec* Infraštruktúrny architekt phudec(a)cnc.sk <mailto:phudec@cnc.sk> *CNC, a.s.* Borská 6, 841 04 Bratislava Recepcia: +421 2 35 000 100 Mobil:+421 905 997 203 *www.cnc.sk* <http:///www.cnc.sk>

3 15

Behaviour when attaching shared iSCSI storage with existing data
by Sam McLeod 09 Jan '18

09 Jan '18

--Apple-Mail=_0EC3C8C4-0EB1-4E35-A593-42CEA5D59791 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=us-ascii If one was to attach a shared iSCSI LUN as 'storage' to an oVirt data = centre that contains existing data - how does oVirt behave? For example the LUN might be partitioned as LVM, then contain existing = filesystems etc... =20 - Would oVirt see that there is existing data on the LUN and simply = attach it as any other linux initiator (client) world, or would it try = to wipe the LUN clean and reinitialise it? Context: Investigating migration from XenServer to oVirt (4.2.0) All our iSCSI storage is currently attached to XenServer hosts, = XenServer formats those raw LUNs with LVM and VMs are stored within = them. If the answer to this is already out there and I should have found it by = searching, I apologise, please point me to the link and I'll RTFM. -- Sam McLeod https://smcleod.net https://twitter.com/s_mcleod --Apple-Mail=_0EC3C8C4-0EB1-4E35-A593-42CEA5D59791 Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset=us-ascii <html><head><meta http-equiv=3D"Content-Type" content=3D"text/html; = charset=3Dus-ascii"></head><body style=3D"word-wrap: break-word; = -webkit-nbsp-mode: space; line-break: after-white-space;" class=3D""><div = class=3D"">If one was to attach a shared iSCSI LUN as 'storage' to an = oVirt data centre that contains existing data - how does oVirt = behave?</div><div class=3D""><br class=3D""></div><div class=3D"">For = example the LUN might be partitioned as LVM, then contain existing = filesystems etc...</div><div class=3D""> </div><div class=3D"">- = Would oVirt see that there is existing data on the LUN and simply attach = it as any other linux initiator (client) world, or would it try to wipe = the LUN clean and reinitialise it?</div><div class=3D""><br = class=3D""></div><div class=3D""><br class=3D""></div><div = class=3D"">Context: Investigating migration from XenServer to oVirt = (4.2.0)</div><div class=3D""><br class=3D""></div><div class=3D"">All = our iSCSI storage is currently attached to XenServer hosts, XenServer = formats those raw LUNs with LVM and VMs are stored within = them.</div><div class=3D""><br class=3D""></div><div class=3D""><br = class=3D""></div><div class=3D""><br class=3D""></div><div class=3D""><i = class=3D"">If the answer to this is already out there and I should have = found it by searching, I apologise, please point me to the link and I'll = RTFM.</i></div><div class=3D""><div class=3D""> <div dir=3D"auto" style=3D"color: rgb(0, 0, 0); letter-spacing: normal; = text-align: start; text-indent: 0px; text-transform: none; white-space: = normal; word-spacing: 0px; -webkit-text-stroke-width: 0px; word-wrap: = break-word; -webkit-nbsp-mode: space; line-break: after-white-space;" = class=3D""><div dir=3D"auto" style=3D"color: rgb(0, 0, 0); = letter-spacing: normal; text-align: start; text-indent: 0px; = text-transform: none; white-space: normal; word-spacing: 0px; = -webkit-text-stroke-width: 0px; word-wrap: break-word; = -webkit-nbsp-mode: space; line-break: after-white-space;" class=3D""><div = dir=3D"auto" style=3D"word-wrap: break-word; -webkit-nbsp-mode: space; = line-break: after-white-space;" class=3D""><div style=3D"color: rgb(0, = 0, 0); font-family: Helvetica; font-size: 12px; font-style: normal; = font-variant-caps: normal; font-weight: normal; letter-spacing: normal; = text-align: start; text-indent: 0px; text-transform: none; white-space: = normal; word-spacing: 0px; -webkit-text-stroke-width: 0px;"><br = class=3D"">--<br class=3D"">Sam McLeod<br class=3D""><a = href=3D"https://smcleod.net" class=3D"">https://smcleod.net</a><br = class=3D"">https://twitter.com/s_mcleod</div></div></div></div> </div> <br class=3D""></div></body></html>= --Apple-Mail=_0EC3C8C4-0EB1-4E35-A593-42CEA5D59791--

3 6

Re: [ovirt-users] How power-saving schedule policy applied?
by Karli Sjöberg 09 Jan '18

09 Jan '18

3 4

Suggestions on changing hosts' network
by Gianluca Cecchi 09 Jan '18

09 Jan '18

Hello, I have a 4.1 cluster based on FC storage domain. There are 2 hosts that are oVirt node-ng The engine is external to the oVirt environment Currently the network situation for ovirtmgmt is this one: engine on network1 (eg 192.168.1.x/24) host1 and host2 on network2 (eg 192.168.2.x/24) network1 and network2 routed through a gw I have to physically move host1 and host2 so that I should change their ip with one on network1. When I added the hosts in oVirt I used as Hostname/IP field their dns hostname What is the simplest approach? I can also give total downtime without particular problems as this is a test environment. I think I can put all infra into maintenance, change dns configuration but then I have also to change hosts network configuration itself... Possibly the best thing to do is remove/add the hosts? I have some doubts about the workflow to follow for removal/add and if for an oVirt-ng node I can change its ip configuration in an easy way.. perhaps from cockpit and then reboot and connect via cockpit to the new ip Thanks in advance for any suggestion Gianluca

4 7

Rebuilding my infra..
by carl langlois 08 Jan '18

08 Jan '18

Hi all After screwing my infra with the update to 4.2 (probably a bad manipulation), i am planning a rebuild of the entire infra. First i want to replace my NFS storage with a glusterfs storage. All documentation tell me that i need 3 hosts.. but for the moment i only have 2 but planning to had more later. So does it make sense to start with 2 hosts and use glusterfs as the storage domain(lets says with a replicate of two with all its limitations). If it make sense, 1- what is the best way to do it. 2- how hard will it be to had the 3rd host when available and make it replica 2+arbiter. Also in a setup where i have 3 hosts (replica 2+arbiter) does all the 3 hosts can run users vm? Thanks for your inputs. Carl

4 4

Deploying self-hosted engine - Waiting for VDSM host to become operation + received packet with own address as source
by Sam McLeod 08 Jan '18

08 Jan '18

--Apple-Mail=_20A673E9-6970-46A2-AB1D-24C67EB2F4DB Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=us-ascii Hello, I'm trying to setup a host as a self-hosted engine as per = https://www.ovirt.org/documentation/self-hosted/chap-Deploying_Self-Hosted= _Engine/ = <https://www.ovirt.org/documentation/self-hosted/chap-Deploying_Self-Hoste= d_Engine/>. The host is configured with two bonded network interfaces: bond0 =3D management network for hypervisors, setup as active/passive. bond1 =3D network that has VLANs for various network segments for = virtual machines to use, setup as LACP bond to upstream switches. On the host, both networks are operational and work as expected. When setting up the self-hosted engine, bond0 is selected as network to = bridge with, and a unique IP is given to the self-hosted engine VM. During the final stages of the self-hosted engine setup, the installer = gets stuck on ' Waiting for the VDSM host to become operational'. While it is repeating this every minute or so the host repeats the = message 'bond0: received packet with own address as source address', = which is odd to me as it's in active/passive bond and I'd only expect to = see this kind of message on XOR / load balanced interfaces. Host console screenshot: https://imgur.com/a/a2JLd = <https://imgur.com/a/a2JLd> Host OS: CentOS 7.4 oVirt version: 4.2.0 ip a on host while install is stuck waiting for VDSM: # ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen = 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: enp2s0f0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 9000 qdisc mq = master bond1 portid 0100000000000000000000373031384833 state UP qlen = 1000 link/ether 78:e3:b5:10:74:88 brd ff:ff:ff:ff:ff:ff 3: enp2s0f1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 9000 qdisc mq = master bond1 portid 0200000000000000000000373031384833 state UP qlen = 1000 link/ether 78:e3:b5:10:74:88 brd ff:ff:ff:ff:ff:ff 4: ens1f0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq = master bond0 portid 0100000000000000000000474835323543 state UP qlen = 1000 link/ether 00:9c:02:3c:49:90 brd ff:ff:ff:ff:ff:ff 5: ens1f1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq = master bond0 portid 0200000000000000000000474835323543 state UP qlen = 1000 link/ether 00:9c:02:3c:49:90 brd ff:ff:ff:ff:ff:ff 6: bond1: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 9000 qdisc = noqueue state UP qlen 1000 link/ether 78:e3:b5:10:74:88 brd ff:ff:ff:ff:ff:ff inet6 fe80::7ae3:b5ff:fe10:7488/64 scope link valid_lft forever preferred_lft forever 7: storage@bond1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc = noqueue state UP qlen 1000 link/ether 78:e3:b5:10:74:88 brd ff:ff:ff:ff:ff:ff inet 10.51.40.172/24 brd 10.51.40.255 scope global storage valid_lft forever preferred_lft forever inet6 fe80::7ae3:b5ff:fe10:7488/64 scope link valid_lft forever preferred_lft forever 9: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen = 1000 link/ether ae:c0:02:25:42:24 brd ff:ff:ff:ff:ff:ff 10: br-int: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen = 1000 link/ether be:92:5d:c3:28:4d brd ff:ff:ff:ff:ff:ff 30: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc = noqueue master ovirtmgmt state UP qlen 1000 link/ether 00:9c:02:3c:49:90 brd ff:ff:ff:ff:ff:ff 46: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue = state UP qlen 1000 link/ether 00:9c:02:3c:49:90 brd ff:ff:ff:ff:ff:ff inet 10.51.14.112/24 brd 10.51.14.255 scope global ovirtmgmt valid_lft forever preferred_lft forever 47: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN = qlen 1000 link/ether 8e:c0:25:88:40:de brd ff:ff:ff:ff:ff:ff Before the self-hosted engine install was run the following did not = exist: ;vdsmdummy; ovs-system br-int ovirtmgmt and bond0 was not a slave of ovirtmgmt. I'm now going to kick off a complete reinstall of CentOS 7 on the host = as I've since tried cleaning up the host using the = ovirt-hosted-engine-cleanup command and removing the packages which seem = to leave the network configuration a mess an doesn't actually cleanup = files on disk as expected. -- Sam McLeod (protoporpoise on IRC) https://smcleod.net https://twitter.com/s_mcleod Words are my own opinions and do not necessarily represent those of my = employer or partners. --Apple-Mail=_20A673E9-6970-46A2-AB1D-24C67EB2F4DB Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset=us-ascii <html><head><meta http-equiv=3D"Content-Type" content=3D"text/html; = charset=3Dus-ascii"></head><body style=3D"word-wrap: break-word; = -webkit-nbsp-mode: space; line-break: after-white-space;" = class=3D"">Hello,<div class=3D""><br class=3D""></div><div class=3D"">I'm = trying to setup a host as a self-hosted engine as per <a = href=3D"https://www.ovirt.org/documentation/self-hosted/chap-Deploying_Sel= f-Hosted_Engine/" = class=3D"">https://www.ovirt.org/documentation/self-hosted/chap-Deploying_= Self-Hosted_Engine/</a>.</div><div class=3D"">The host is configured = with two bonded network interfaces:</div><div class=3D""><br = class=3D""></div><div class=3D"">bond0 =3D management network for = hypervisors, setup as active/passive.</div><div class=3D"">bond1 =3D = network that has VLANs for various network segments for virtual machines = to use, setup as LACP bond to upstream switches.</div><div class=3D""><div= class=3D""><br class=3D"webkit-block-placeholder"></div><div = class=3D"">On the host, both networks are operational and work as = expected.</div><div class=3D""><br class=3D""></div><div class=3D"">When = setting up the self-hosted engine, bond0 is selected as network to = bridge with, and a unique IP is given to the self-hosted engine = VM.</div><div class=3D""><br class=3D""></div><div class=3D"">During the = final stages of the self-hosted engine setup, the installer gets stuck = on ' Waiting for the VDSM host to become operational'.</div><div = class=3D"">While it is repeating this every minute or so the host = repeats the message 'bond0: received packet with own address as source = address', which is odd to me as it's in active/passive bond and I'd only = expect to see this kind of message on XOR / load balanced = interfaces.</div><div class=3D""><br = class=3D"webkit-block-placeholder"></div><div class=3D"">Host console = screenshot: <a href=3D"https://imgur.com/a/a2JLd" = class=3D"">https://imgur.com/a/a2JLd</a></div><div class=3D"">Host OS: = CentOS 7.4</div><div class=3D"">oVirt version: 4.2.0</div><div = class=3D""><br class=3D""></div><div class=3D"">ip a on host while = install is stuck waiting for VDSM:</div><div class=3D""><br = class=3D""></div><div class=3D""><font face=3D"IBMPlexMono" class=3D""># = ip a<br class=3D"">1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc = noqueue state UNKNOWN qlen 1000<br class=3D"">    = link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00<br class=3D""> =   inet 127.0.0.1/8 scope host lo<br class=3D"">    =    valid_lft forever preferred_lft forever<br class=3D"">  =   inet6 ::1/128 scope host<br class=3D"">      =  valid_lft forever preferred_lft forever<br class=3D"">2: enp2s0f0: = <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 9000 qdisc mq master = bond1 portid 0100000000000000000000373031384833 state UP qlen 1000<br = class=3D"">    link/ether 78:e3:b5:10:74:88 brd = ff:ff:ff:ff:ff:ff<br class=3D"">3: enp2s0f1: = <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 9000 qdisc mq master = bond1 portid 0200000000000000000000373031384833 state UP qlen 1000<br = class=3D"">    link/ether 78:e3:b5:10:74:88 brd = ff:ff:ff:ff:ff:ff<br class=3D"">4: ens1f0: = <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master = bond0 portid 0100000000000000000000474835323543 state UP qlen 1000<br = class=3D"">    link/ether 00:9c:02:3c:49:90 brd = ff:ff:ff:ff:ff:ff<br class=3D"">5: ens1f1: = <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master = bond0 portid 0200000000000000000000474835323543 state UP qlen 1000<br = class=3D"">    link/ether 00:9c:02:3c:49:90 brd = ff:ff:ff:ff:ff:ff<br class=3D"">6: bond1: = <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 9000 qdisc noqueue = state UP qlen 1000<br class=3D"">    link/ether = 78:e3:b5:10:74:88 brd ff:ff:ff:ff:ff:ff<br class=3D"">    = inet6 fe80::7ae3:b5ff:fe10:7488/64 scope link<br class=3D"">  =      valid_lft forever preferred_lft forever<br = class=3D"">7: storage@bond1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu = 9000 qdisc noqueue state UP qlen 1000<br class=3D"">    = link/ether 78:e3:b5:10:74:88 brd ff:ff:ff:ff:ff:ff<br class=3D"">  =   inet 10.51.40.172/24 brd 10.51.40.255 scope global storage<br = class=3D"">       valid_lft forever preferred_lft = forever<br class=3D"">    inet6 fe80::7ae3:b5ff:fe10:7488/64 = scope link<br class=3D"">       valid_lft forever = preferred_lft forever<br class=3D"">9: ovs-system: = <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000<br = class=3D"">    link/ether ae:c0:02:25:42:24 brd = ff:ff:ff:ff:ff:ff<br class=3D"">10: br-int: <BROADCAST,MULTICAST> = mtu 1500 qdisc noop state DOWN qlen 1000<br class=3D"">    = link/ether be:92:5d:c3:28:4d brd ff:ff:ff:ff:ff:ff<br class=3D"">30: = bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc = noqueue master ovirtmgmt state UP qlen 1000<br class=3D"">    = link/ether 00:9c:02:3c:49:90 brd ff:ff:ff:ff:ff:ff<br class=3D"">46: = ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc = noqueue state UP qlen 1000<br class=3D"">    link/ether = 00:9c:02:3c:49:90 brd ff:ff:ff:ff:ff:ff<br class=3D"">    inet = 10.51.14.112/24 brd 10.51.14.255 scope global ovirtmgmt<br = class=3D"">       valid_lft forever preferred_lft = forever<br class=3D"">47: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu = 1500 qdisc noop state DOWN qlen 1000<br class=3D"">    = link/ether 8e:c0:25:88:40:de brd ff:ff:ff:ff:ff:ff</font></div><div = class=3D""><br class=3D""></div><div class=3D""><br class=3D""></div><div = class=3D"">Before the self-hosted engine install was run the following = did not exist:</div><div class=3D""><br class=3D""></div><div = class=3D""><font face=3D"IBMPlexMono" = class=3D"">;vdsmdummy;</font></div><div class=3D""><font = face=3D"IBMPlexMono" class=3D"">ovs-system</font></div><div = class=3D""><font face=3D"IBMPlexMono" class=3D"">br-int</font></div><div = class=3D""><font face=3D"IBMPlexMono" = class=3D"">ovirtmgmt</font></div><div class=3D""><br class=3D""></div><div= class=3D"">and bond0 was <i class=3D"">not</i> a slave of = ovirtmgmt.</div><div class=3D""><br class=3D""></div><div class=3D"">I'm = now going to kick off a complete reinstall of CentOS 7 on the host as = I've since tried cleaning up the host using the = ovirt-hosted-engine-cleanup command and removing the packages which seem = to leave the network configuration a mess an doesn't actually cleanup = files on disk as expected.</div><div class=3D""><br class=3D""></div><div = class=3D""><div dir=3D"auto" style=3D"color: rgb(0, 0, 0); = letter-spacing: normal; text-align: start; text-indent: 0px; = text-transform: none; white-space: normal; word-spacing: 0px; = -webkit-text-stroke-width: 0px; word-wrap: break-word; = -webkit-nbsp-mode: space; line-break: after-white-space;" class=3D""><div = dir=3D"auto" style=3D"color: rgb(0, 0, 0); letter-spacing: normal; = text-align: start; text-indent: 0px; text-transform: none; white-space: = normal; word-spacing: 0px; -webkit-text-stroke-width: 0px; word-wrap: = break-word; -webkit-nbsp-mode: space; line-break: after-white-space;" = class=3D""><div dir=3D"auto" style=3D"word-wrap: break-word; = -webkit-nbsp-mode: space; line-break: after-white-space;" class=3D""><div = style=3D"color: rgb(0, 0, 0); font-family: Helvetica; font-size: 12px; = font-style: normal; font-variant-caps: normal; font-weight: normal; = letter-spacing: normal; text-align: start; text-indent: 0px; = text-transform: none; white-space: normal; word-spacing: 0px; = -webkit-text-stroke-width: 0px;"><br = class=3D""></div></div></div></div></div></div><div class=3D""> <div dir=3D"auto" style=3D"color: rgb(0, 0, 0); letter-spacing: normal; = text-align: start; text-indent: 0px; text-transform: none; white-space: = normal; word-spacing: 0px; -webkit-text-stroke-width: 0px; word-wrap: = break-word; -webkit-nbsp-mode: space; line-break: after-white-space;" = class=3D""><div dir=3D"auto" style=3D"color: rgb(0, 0, 0); = letter-spacing: normal; text-align: start; text-indent: 0px; = text-transform: none; white-space: normal; word-spacing: 0px; = -webkit-text-stroke-width: 0px; word-wrap: break-word; = -webkit-nbsp-mode: space; line-break: after-white-space;" class=3D""><div = dir=3D"auto" style=3D"word-wrap: break-word; -webkit-nbsp-mode: space; = line-break: after-white-space;" class=3D""><div style=3D"color: rgb(0, = 0, 0); font-family: Helvetica; font-size: 12px; font-style: normal; = font-variant-caps: normal; font-weight: normal; letter-spacing: normal; = text-align: start; text-indent: 0px; text-transform: none; white-space: = normal; word-spacing: 0px; -webkit-text-stroke-width: 0px;">--<br = class=3D"">Sam McLeod (protoporpoise on IRC)</div><div style=3D"color: = rgb(0, 0, 0); font-family: Helvetica; font-size: 12px; font-style: = normal; font-variant-caps: normal; font-weight: normal; letter-spacing: = normal; text-align: start; text-indent: 0px; text-transform: none; = white-space: normal; word-spacing: 0px; -webkit-text-stroke-width: = 0px;"><a href=3D"https://smcleod.net" = class=3D"">https://smcleod.net</a><br = class=3D"">https://twitter.com/s_mcleod<br class=3D""><br class=3D"">Words= are my own opinions and do not necessarily represent those of = my employer or partners.</div></div></div></div> </div> <br class=3D""></body></html>= --Apple-Mail=_20A673E9-6970-46A2-AB1D-24C67EB2F4DB--

2 2

Re: [ovirt-users] Ovirt 4.0
by Wesley Stewart 08 Jan '18

08 Jan '18

I believe you most upgrade to 4.1 first, and then to 4.2. On Jan 8, 2018 6:00 AM, "Marktvk" <marktvk(a)xs4all.nl> wrote: Hello, We have now running ovirt 4.0 for a specif reason we can not upgrade to the new version. If possible for 1 time to upgrade qemu-kvm to the new version for the fix with processors today ? I hope so. _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users

4 3