- Users - oVirt List Archives

Empty cgroup files on centos 7.3 host
by Florian Schmid 18 Dec '17

18 Dec '17

Hi, I wanted to monitor disk IO and R/W on all of our oVirt centos 7.3 hypervisor hosts, but it looks like that all those files are empty. For example: ls -al /sys/fs/cgroup/blkio/machine.slice/machine-qemu\\x2d14\\x2dHostedEngine.scope/ insgesamt 0 drwxr-xr-x. 2 root root 0 30. Mai 10:09 . drwxr-xr-x. 16 root root 0 26. Jun 09:25 .. -r--r--r--. 1 root root 0 30. Mai 10:09 blkio.io_merged -r--r--r--. 1 root root 0 30. Mai 10:09 blkio.io_merged_recursive -r--r--r--. 1 root root 0 30. Mai 10:09 blkio.io_queued -r--r--r--. 1 root root 0 30. Mai 10:09 blkio.io_queued_recursive -r--r--r--. 1 root root 0 30. Mai 10:09 blkio.io_service_bytes -r--r--r--. 1 root root 0 30. Mai 10:09 blkio.io_service_bytes_recursive -r--r--r--. 1 root root 0 30. Mai 10:09 blkio.io_serviced -r--r--r--. 1 root root 0 30. Mai 10:09 blkio.io_serviced_recursive -r--r--r--. 1 root root 0 30. Mai 10:09 blkio.io_service_time -r--r--r--. 1 root root 0 30. Mai 10:09 blkio.io_service_time_recursive -r--r--r--. 1 root root 0 30. Mai 10:09 blkio.io_wait_time -r--r--r--. 1 root root 0 30. Mai 10:09 blkio.io_wait_time_recursive -rw-r--r--. 1 root root 0 30. Mai 10:09 blkio.leaf_weight -rw-r--r--. 1 root root 0 30. Mai 10:09 blkio.leaf_weight_device --w-------. 1 root root 0 30. Mai 10:09 blkio.reset_stats -r--r--r--. 1 root root 0 30. Mai 10:09 blkio.sectors -r--r--r--. 1 root root 0 30. Mai 10:09 blkio.sectors_recursive -r--r--r--. 1 root root 0 30. Mai 10:09 blkio.throttle.io_service_bytes -r--r--r--. 1 root root 0 30. Mai 10:09 blkio.throttle.io_serviced -rw-r--r--. 1 root root 0 30. Mai 10:09 blkio.throttle.read_bps_device -rw-r--r--. 1 root root 0 30. Mai 10:09 blkio.throttle.read_iops_device -rw-r--r--. 1 root root 0 30. Mai 10:09 blkio.throttle.write_bps_device -rw-r--r--. 1 root root 0 30. Mai 10:09 blkio.throttle.write_iops_device -r--r--r--. 1 root root 0 30. Mai 10:09 blkio.time -r--r--r--. 1 root root 0 30. Mai 10:09 blkio.time_recursive -rw-r--r--. 1 root root 0 30. Mai 10:09 blkio.weight -rw-r--r--. 1 root root 0 30. Mai 10:09 blkio.weight_device -rw-r--r--. 1 root root 0 30. Mai 10:09 cgroup.clone_children --w--w--w-. 1 root root 0 30. Mai 10:09 cgroup.event_control -rw-r--r--. 1 root root 0 30. Mai 10:09 cgroup.procs -rw-r--r--. 1 root root 0 30. Mai 10:09 notify_on_release -rw-r--r--. 1 root root 0 30. Mai 10:09 tasks I thought, I can get my needed values from there, but all files are empty. Looking at this post: http://lists.ovirt.org/pipermail/users/2017-January/079011.html this should work. Is this normal on centos 7.3 with oVirt installed? How can I get those values, without monitoring all VMs directly? oVirt Version we use: 4.1.1.8-1.el7.centos BR Florian

3 12

Option to put host into maintenance after installation of new host
by Florian Schmid 18 Dec '17

18 Dec '17

Hi, would it be possible for future releases to add an option to the add new host tab to put the host in maintenance after installation instead of activating it. The same would be for reinstall. I have the problem now, that all hosts after installation will be activated, but network is not configured yet. Therefore host will be in non operational state and will be rebooted immediately. The only solution I have now is to configure power management after the host has all networks configured. I want to have all my networks as required, because otherwise someone will forget to add all of them and then you have other issues. BR Florian

3 2

[ANN] oVirt 4.2.0 Third Candidate Release is now available for testing
by Sandro Bonazzola 18 Dec '17

18 Dec '17

The oVirt Project is pleased to announce the availability of the Third Candidate Release of oVirt 4.2.0, as of December 18th, 2017 This is pre-release software. This pre-release should not to be used in production. Please take a look at our community page[1] to learn how to ask questions and interact with developers and users. All issues or bugs should be reported via oVirt Bugzilla[2]. This release candidate includes fixes to the blocker bugs found while testing the second release candidate. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.4 or later * CentOS Linux (or similar) 7.4 or later This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.4 or later * CentOS Linux (or similar) 7.4 or later * oVirt Node 4.2 (available for x86_64 only) See the release notes draft [3] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available. - oVirt Node is already available [4] Additional Resources: * Read more about the oVirt 4.2.0 release highlights: http://www.ovirt.org/release/4.2.0/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] https://www.ovirt.org/community/ [2] https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt [3] http://www.ovirt.org/release/4.2.0/ [4] http://resources.ovirt.org/pub/ovirt-4.2-pre/iso/ -- SANDRO BONAZZOLA ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D Red Hat EMEA <https://www.redhat.com/> <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

Reassign ovirtmgmt to a new bond with ansible
by Luca 'remix_tj' Lorenzetto 18 Dec '17

18 Dec '17

Hello, I'm trying to create a playbook for deployment of a new node in my ovirt deployment. I'm using the role ovirt-infra from ovirt-infra-roles 1.1.1. I'm creating a new bond and assigning ovirtmgmt to that bond: This is the value of the variable host_networks printed out by ansible: TASK [host_networks] ********************************************************************************************************************************* ok: [localhost] => { "host_networks": [ { "bond": { "interfaces": [ "enp2s0f0", "enp2s0f1" ], "mode": 1, "name": "bond0" }, "check": true, "name": "ovirt01.intranet.company.it", "networks": [ { "address": "10.5.40.197", "boot_protocol": "static", "gateway": "10.5.43.254", "name": "ovirtmgmt", "prefix": "255.255.252.0" } ], "save": true }, { "bond": { "interfaces": [ "enp2s0f2", "enp2s0f3" ], "mode": 1, "name": "bond1" }, "check": true, "name": "ovirt01.intranet.company.it", "networks": [ { "address": "10.5.160.47", "boot_protocol": "static", "name": "NFS", "netmask": "255.255.252.0" } ], "save": true } ] } When running the playbook i get: Error: Fault reason is "Operation Failed". Fault detail is "[Cannot setup Networks. Network ovirtmgmt is already attached via attachment 3315148d-f669-48b0-9c16-601faaea9ce5. A new attachment cannot be used for the same network, please reuse the existing one.]" How do i reuse the existing attachment? The other network (NFS) has been attached without issues. -- "E' assurdo impiegare gli uomini di intelligenza eccellente per fare calcoli che potrebbero essere affidati a chiunque se si usassero delle macchine" Gottfried Wilhelm von Leibnitz, Filosofo e Matematico (1646-1716) "Internet è la più grande biblioteca del mondo. Ma il problema è che i libri sono tutti sparsi sul pavimento" John Allen Paulos, Matematico (1945-vivente) Luca 'remix_tj' Lorenzetto, http://www.remixtj.net , <lorenzetto.luca(a)gmail.com>

3 3

Re: [ovirt-users] oVirt Actual Size <1GB
by Eyal Shenitzky 18 Dec '17

18 Dec '17

Hi Johann, >From the log I can see that the extend operation failed and the VM should restart in order to detect the new size: 2017-12-12 13:44:32,353 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ExtendVmDiskSizeVDSCommand] (pool-6-thread-49) START, ExtendVmDiskSizeVDSCommand(HostName = local_host, HostId = df207913-ef95-4783-91a8-eec9642c2393, vmId=00000000-0000-0000-0000-000000000000), log id: 7c2329fd 2017-12-12 13:44:32,417 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.ExtendVmDiskSizeVDSCommand] (pool-6-thread-49) Failed in ExtendVmDiskSizeVDS method 2017-12-12 13:44:32,417 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.ExtendVmDiskSizeVDSCommand] (pool-6-thread-49) Error code GeneralException and error message VDSGenericException: VDSErrorException: Failed to ExtendVmDiskSizeVDS, error = 'sdUUID' 2017-12-12 13:44:32,418 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.ExtendVmDiskSizeVDSCommand] (pool-6-thread-49) Command ExtendVmDiskSizeVDS execution failed. Exception: VDSErrorException: VDSGenericException: VDSErrorException: Failed to ExtendVmDiskSizeVDS, error = 'sdUUID' 2017-12-12 13:44:32,419 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ExtendVmDiskSizeVDSCommand] (pool-6-thread-49) FINISH, ExtendVmDiskSizeVDSCommand, log id: 7c2329fd 2017-12-12 13:44:32,420 WARN [org.ovirt.engine.core.bll.ExtendImageSizeCommand] (pool-6-thread-49) Failed to update VM Server2012 with the new volume size due to error: VdcBLLException: VdcBLLException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to ExtendVmDiskSizeVDS, error = 'sdUUID' (Failed with VDSM error GeneralException and code 100).VM should be restarted to detect the new size. On Wed, Dec 13, 2017 at 11:33 AM, Johann van der Westhuizen < johann(a)sharenet.co.za> wrote: > Hi, > > > > Log file attached. > > > > Regards / Groete, > > > > JOHANN VAN DER WESTHUIZEN > > Systems Administrator > > > > 4 Silverwood Close > <https://maps.google.com/?q=4+Silverwood+Close&entry=gmail&source=g> > > T > > +27 21 700 4827 <+27%2021%20700%204827> > > Steenberg Office Park > > E > > johann(a)sharenet.co.za > > Westlake > > > > > > *www.sharenet.co.za* <http://www.sharenet.co.za/> > > > > <http://www.sharenet.co.za/v3/trade/> > > > > The views and opinions expressed in this message are those of the > individual sender of this message and do not necessarily represent the > views and opinions of Sharenet (Pty) Ltd. Consequently, Sharenet (Pty) Ltd > does not accept responsibility for such views and opinions and this message > should not be read as representing the views and opinions of Sharenet (Pty) > Ltd without subsequent written confirmation. Each page attached hereto must > also be read in conjunction with this disclaimer. Confidentiality note: > This message is intended for the addressee only. If you are not the > intended recipient of this message, you are notified that any distribution, > use of or copying of this communication is strictly prohibited. If you have > received the communication in error, please notify the sender immediately. > > > > Sharenet Investments (FSP#46570) and Sharenet Securities (FSP#28430) > are authorised financial service providers. > > > > *From:* Eyal Shenitzky [mailto:eshenitz@redhat.com] > *Sent:* 13 December 2017 11:21 > *To:* Johann van der Westhuizen <johann(a)sharenet.co.za> > *Cc:* Simone Tiraboschi <stirabos(a)redhat.com>; users(a)ovirt.org > *Subject:* Re: [ovirt-users] oVirt Actual Size <1GB > > > > Hi Johann, > > > > You can find the engine log under: /var/log/ovirt-engine/engine.log > > > > Please add this log also. > > > > > > On Wed, Dec 13, 2017 at 8:39 AM, Johann van der Westhuizen < > johann(a)sharenet.co.za> wrote: > > Hi, > > > > Thanks for the reply and update. > > > > I had a look and can only find this directory: /var/log/ovirt-engine/ > > > > I attached some other files that might help? > > > > Did that other log file I’ve attached helped in any way? > > > > Will you be able to assist me with this and help me fix it. > > > > Thanks. > > > > Regards / Groete, > > > > JOHANN VAN DER WESTHUIZEN > > Systems Administrator > > > > 4 Silverwood Close > <https://maps.google.com/?q=4+Silverwood+Close&entry=gmail&source=g> > > T > > +27 21 700 4827 <+27%2021%20700%204827> > > Steenberg Office Park > > E > > johann(a)sharenet.co.za > > Westlake > > > > > > *www.sharenet.co.za* <http://www.sharenet.co.za/> > > > > <http://www.sharenet.co.za/v3/trade/> > > > > The views and opinions expressed in this message are those of the > individual sender of this message and do not necessarily represent the > views and opinions of Sharenet (Pty) Ltd. Consequently, Sharenet (Pty) Ltd > does not accept responsibility for such views and opinions and this message > should not be read as representing the views and opinions of Sharenet (Pty) > Ltd without subsequent written confirmation. Each page attached hereto must > also be read in conjunction with this disclaimer. Confidentiality note: > This message is intended for the addressee only. If you are not the > intended recipient of this message, you are notified that any distribution, > use of or copying of this communication is strictly prohibited. If you have > received the communication in error, please notify the sender immediately. > > > > Sharenet Investments (FSP#46570) and Sharenet Securities (FSP#28430) > are authorised financial service providers. > > > > *From:* Simone Tiraboschi [mailto:stirabos@redhat.com] > *Sent:* 12 December 2017 19:45 > *To:* Johann van der Westhuizen <johann(a)sharenet.co.za> > *Cc:* Amit Aviram <aaviram(a)redhat.com>; users(a)ovirt.org > *Subject:* Re: [ovirt-users] oVirt Actual Size <1GB > > > > > > > > On Tue, Dec 12, 2017 at 4:23 PM, Johann van der Westhuizen < > johann(a)sharenet.co.za> wrote: > > Hi, > > > > Okay I got the vdsm.log, please see link below: > > > > http://support.sharenet.co.za/vdsm.log > > > > But can’t find the agent.log file. > > > > /var/log/ovirt-hosted-engine-ha/agent.log > > > > > > Regards / Groete, > > > > JOHANN VAN DER WESTHUIZEN > > Systems Administrator > > > > 4 Silverwood Close > <https://maps.google.com/?q=4+Silverwood+Close&entry=gmail&source=g> > > T > > +27 21 700 4827 <+27%2021%20700%204827> > > Steenberg Office Park > > E > > johann(a)sharenet.co.za > > Westlake > > > > > > *www.sharenet.co.za* <http://www.sharenet.co.za/> > > > > <http://www.sharenet.co.za/v3/trade/> > > > > The views and opinions expressed in this message are those of the > individual sender of this message and do not necessarily represent the > views and opinions of Sharenet (Pty) Ltd. Consequently, Sharenet (Pty) Ltd > does not accept responsibility for such views and opinions and this message > should not be read as representing the views and opinions of Sharenet (Pty) > Ltd without subsequent written confirmation. Each page attached hereto must > also be read in conjunction with this disclaimer. Confidentiality note: > This message is intended for the addressee only. If you are not the > intended recipient of this message, you are notified that any distribution, > use of or copying of this communication is strictly prohibited. If you have > received the communication in error, please notify the sender immediately. > > > > Sharenet Investments (FSP#46570) and Sharenet Securities (FSP#28430) > are authorised financial service providers. > > > > *From:* Simone Tiraboschi [mailto:stirabos@redhat.com] > *Sent:* 12 December 2017 15:44 > *To:* Johann van der Westhuizen <johann(a)sharenet.co.za> > *Cc:* Amit Aviram <aaviram(a)redhat.com>; users(a)ovirt.org > *Subject:* Re: [ovirt-users] oVirt Actual Size <1GB > > > > > > > > On Tue, Dec 12, 2017 at 12:38 PM, Johann van der Westhuizen < > johann(a)sharenet.co.za> wrote: > > Hi, > > > > Okay, I have a question, if you will be able to assist me. > > > > I’ve extended the size of the disk via the oVirt Admin and now all of a > sudden it shows actual size < 1GB and the VM doesn’t want to boot, the > virtual size was 100GB and I’ve changed it to 150GB. > > > > Anything you could do to help me fix this. > > > > Do you mean that you installed hosted-engine and extended the disk of the > engine VM? > > If so, could you please attach vdsm.log and agent.log from the host that > tries to start the engine VM? > > > > > > > > Much appreciated. > > > > Thanks. > > > > Regards / Groete, > > > > JOHANN VAN DER WESTHUIZEN > > Systems Administrator > > > > 4 Silverwood Close > <https://maps.google.com/?q=4+Silverwood+Close&entry=gmail&source=g> > > T > > +27 21 700 4827 <+27%2021%20700%204827> > > Steenberg Office Park > > E > > johann(a)sharenet.co.za > > Westlake > > > > > > *www.sharenet.co.za* <http://www.sharenet.co.za/> > > > > <http://www.sharenet.co.za/v3/trade/> > > > > The views and opinions expressed in this message are those of the > individual sender of this message and do not necessarily represent the > views and opinions of Sharenet (Pty) Ltd. Consequently, Sharenet (Pty) Ltd > does not accept responsibility for such views and opinions and this message > should not be read as representing the views and opinions of Sharenet (Pty) > Ltd without subsequent written confirmation. Each page attached hereto must > also be read in conjunction with this disclaimer. Confidentiality note: > This message is intended for the addressee only. If you are not the > intended recipient of this message, you are notified that any distribution, > use of or copying of this communication is strictly prohibited. If you have > received the communication in error, please notify the sender immediately. > > > > Sharenet Investments (FSP#46570) and Sharenet Securities (FSP#28430) > are authorised financial service providers. > > > > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > > > > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > > > > -- > > Regards, > > Eyal Shenitzky > -- Regards, Eyal Shenitzky

2 5

FOSDEM '18 vVirt and IaaS room agenda published!
by Doron Fediuck 17 Dec '17

17 Dec '17

This[1] is your chance to meet some of the oVirt guys and here some interesting talks. See you in FOSDEM! Doron [1] https://fosdem.org/2018/schedule/track/virtualization_and_iaas/

1 0

virt-p2v not recognising Hard Disks of Server
by Anantha Raghava 16 Dec '17

16 Dec '17

This is a multi-part message in MIME format. --------------703700E9D5D377A7CE8E2B07 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Hello, I am trying to convert a physical server (10 year old hardware with PCI LSI Loging / Symbios LSI MegaRAID controller and SCSI drives, RAID 5 Configuration). Host to be converted has Fedora 5 OS. I have downloaded the virt-p2v.iso (Cent OS 7.3). I have prepared the conversion server. I am able to boot the physical server with virt-p2v.iso. I am able to connect to conversion server. But none of the Hard Disks are listed to select for conversion. I opine, probably it is something to do with SCSI / RAID Card drivers. Is there a way I can get these drivers into virt-p2v.iso? Any suggestions to get this task to completion? Thanks in advance. -- Thanks & Regards, Anantha Raghava Do not print this e-mail unless required. Save Paper & trees. --------------703700E9D5D377A7CE8E2B07 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=utf-8"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hello, I am trying to convert a physical server (10 year old hardware with PCI LSI Loging / Symbios LSI MegaRAID controller and SCSI drives, RAID 5 Configuration). Host to be converted has Fedora 5 OS. I have downloaded the virt-p2v.iso (Cent OS 7.3). I have prepared the conversion server. I am able to boot the physical server with virt-p2v.iso. I am able to connect to conversion server. But none of the Hard Disks are listed to select for conversion. I opine, probably it is something to do with SCSI / RAID Card drivers. Is there a way I can get these drivers into virt-p2v.iso? Any suggestions to get this task to completion? <div class="moz-signature">Thanks in advance. <meta http-equiv="content-type" content="text/html; charset=utf-8"> <title></title> <meta name="generator" content="LibreOffice 5.0.3.2 (Linux)"> <meta name="created" content="00:00:00"> <meta name="changedby" content="Anantha Raghava"> <meta name="changed" content="2016-01-05T17:20:50.677541300"> <meta name="created" content="00:00:00"> <meta name="changedby" content="Anantha Raghava"> <meta name="changed" content="2015-12-20T09:03:26.251763811"> <meta name="created" content="2015-02-21T00:00:00"> <meta name="changedby" content="Anantha Raghava"> <meta name="changed" content="2015-12-20T09:02:11.666821134"> <style type="text/css"> @page { margin: 2cm } p { margin-bottom: 0.25cm; color: #000000; line-height: 120% } address { color: #000000 } a:link { so-language: zxx } </style> -- Thanks & Regards, <address style="line-height: 100%">Anantha Raghava</address> Do not print this e-mail unless required. Save Paper & trees. </div> </body> </html> --------------703700E9D5D377A7CE8E2B07--

2 1

katello-agent is available for testing in CentOS Virt SIG
by Sandro Bonazzola 15 Dec '17

15 Dec '17

Hi, for those willing to use katello for monitoring oVirt hosts upgrade status, we added katello-agent to CentOS Virt SIG testing repo. If no negative feedback is provided, I'll tag it for release on December 20th. In order to install it: # yum install centos-release-ovirt41 # yum-config-manager --enable centos-ovirt41-testing --save # yum install katello-agent Note that oly the agent/client part has been included in Virt SIG, in order to install foreman with katello plugin follow katello website instructions. For more info about katello: https://www.theforeman.org/plugins/katello/ Thanks, -- SANDRO BONAZZOLA ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D Red Hat EMEA <https://www.redhat.com/> <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

(no subject)
by Roberto Nunin 14 Dec '17

14 Dec '17

Another attempt to fully check deploy of ovirt-node-ng and hoste engine in my lab environment. Ovirt node image used: ovirt-node-ng-installer-ovirt-4.2-pre-2017121215.iso Three HPE Proliant BL680cG7, with local storage (Gluster). Full deploy from scratch, executed two times just to have confirmation. In both cases I had the same condition. Gluster deploy complete without issues. Hosted Engine do not complete, hangs at the end of the process, when HE VM is answering correctly. Imported two additional hosts (now that part works correctly) Added first data domain, ok Imported automatically the hosted-engine data domain Failed to import the Hosted Engine VM is the error that appear in the event log. Attached the HE deploy log and HE engine.log, where are reported all the attempts to import HE VM: 2017-12-14 01:43:38,733+01 ERROR [org.ovirt.engine.core.bll.HostedEngineImporter] (EE-ManagedThreadFactory-engine-Thread-259) [1193f931] Failed importing the Hosted Engine VM 2017-12-14 01:43:38,739+01 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-259) [1193f931] EVENT_ID: HOSTED_ENGINE_VM_IMPORT_FAILED(10,457), Failed importing the Hosted Engine VM 2017-12-14 01:43:53,703+01 ERROR [org.ovirt.engine.core.bll.HostedEngineImporter] (EE-ManagedThreadFactory-engine-Thread-266) [4d597e01] Failed importing the Hosted Engine VM 2017-12-14 01:44:08,812+01 ERROR [org.ovirt.engine.core.bll.HostedEngineImporter] (EE-ManagedThreadFactory-engine-Thread-273) [5cef57aa] Failed importing the Hosted Engine VM This is the screenshot of the "frozen" phase [image: Immagine incorporata 1] Any hint about find the reason about the failed import ? Thanks in advance. Available for further tests. -- Roberto

2 1

about iscsi multipathing
by Nathanaël Blanchet 14 Dec '17

14 Dec '17

Hi all, It should be a good idea not to allow adding a new iscsi multipath profile when hosts don't have an IP address on the selected network... or make unvailable network that don't have IP address in the dialog. Currently, engine allows it without error while it is not effective on the hosts. Should be a RFE, shouldn't be? -- Nathanaël Blanchet Supervision réseau Pôle Infrastrutures Informatiques 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr

1 0