- Users - oVirt List Archives

Fixed ovirt-node-ng packages
by Lev Veyde 09 Nov '17

09 Nov '17

Unfortunately shortly after the oVirt 4.1.7 release we discovered a critical issue with ovirt-node-ng. The issue was promptly handled, and fixed packages were pushed into the repo. Also the ovirt-node-ng-installer ISO was rebuilt. Please make sure to update your repo and use the fixed ovirt-node-ng-installer ISO: http://plain.resources.ovirt.org/pub/ovirt-4.1/iso/ovirt-node-ng-installer-… -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

2 3

CIFS Share
by Arthur Melo 09 Nov '17

09 Nov '17

Is it possible to mount a export share using CIFS? Atenciosamente, Arthur Melo Linux User #302250

1 0

How to mount/use a shareable disk
by Jayme Fall 09 Nov '17

09 Nov '17

I’m playing around with shared disks in ovirt to allow a couple of vm’s to access the same data. I created a new disk that is shareable and attached it to one of my CentOS vms but I don’t understand how to actually make use of the shared disk. It does not show up as a mounted disk on the Centos VM. How do I actually use this shared disk from within my VM, or am I mis-understanding its purpose? Thanks!

2 1

New post on oVirt blog: Engine XML Brings a Smoother Flow of Data Into oVirt
by John Marks 09 Nov '17

09 Nov '17

Hello! Just a quick heads up that there is a new post on the oVirt blog: Engine XML Brings a Smoother Flow of Data Into oVirt <https://ovirt.org/blog/2017/11/engine-xml/> In a nutshell: oVirt 4.2 now includes an important behind-the-scenes enhancement that improves data communication between the engine and Libvirt. Check out the post. <https://ovirt.org/blog/2017/11/engine-xml/>. See you on the oVirt blog! Best, John -- John Marks Technical Writer, oVirt redhat Israel Cell: +972 52 8644 491 -- John Marks Technical Writer, oVirt redhat Israel Cell: +972 52 8644 491

1 0

How to list our company as a Provider
by Computer Port IT Solutions 09 Nov '17

09 Nov '17

Hi, We would like to know how we can be listed as a oVirt provider for India and we would like to be listed in Professional Services: https://www.ovirt.org/community/user-stories/users-and-providers/ Thanks and regards Computer Port IT Solutions India

2 1

can't migrate Windows 2012R2 VM
by Matthias Leopold 09 Nov '17

09 Nov '17

Hi, i'm experiencing reproducible problems migrating Windows 2012R2 VMs in oVirt 4.1 environments. I can't migrate two different Windows 2012R2 VMs in two different oVirt environments. engine.log in this situation is the same in both cases, i'm attaching it. lines like "Failed to destroy VM 'd4ddd4d1-2de4-4ace-900d-76552cadefb0' because VM does not exist, ignoring" "VM 'd4ddd4d1-2de4-4ace-900d-76552cadefb0'(ovirt-test03_win2012) was unexpectedly detected as 'Down' on VDS 'xxx'" don't sound too confidence-inspiring. Windows 2008 and Windows 2016 VMs can be migrated with no problem. - oVirt version is 4.1.6 - VirtIO drivers and oVirt guest agent in windows guest were installed from oVirt-toolsSetup-4.1-5.fc24.iso (one VM is using VirtIO devices, other VM isn't) - oVirt cluster migration settings are default in a 4.1 install (migration policy: legacy, i also tried: minimal downtime, post copy migration, no avail...) thx for any advice matthias

2 3

Hosted Engine installation + GlusterFS cluster
by Artem Tambovskiy 09 Nov '17

09 Nov '17

Another yet attempt to get a help on hosted-engine deployment with glusterfs cluster. I already spend a day trying to get bring such a setup to work with no luck. The hosted engine being successfully deployed but I can't activate the host, the storage domain for the host is missing and I can't even add it. So either something went wrong during deployment or my glusterfs cluster doesn't configured properly. That are the prerequisites for this? - glusterfs cluster of 3 nodes with replica 3 volume - Any specific volume configs? - how many volumes should I prepare for hosted engine deployment? Any other thoughts? Regards, Artem

2 1

Re: [ovirt-users] glusterFS is not independent?
by Johan Bernhardsson 09 Nov '17

09 Nov '17

Gluster would be to overcomplicate this if you only want local storage on both to be reachable over the network. Simplest way is to setup an nf server on both nodes and create a storage domain for each. Gluster is a way to secure your data and replicate them over several nodes. so that if one node goes down or explodes you always have the data replicated to other nodes. Running a single brick gluster volume is not recomended. /JohanOn Thu, 2017-11-09 at 11:57 +0100, Jon bae wrote: > Thank you for your answer! > > I don't understand way I have to put them in replicate mode. As I > understand replicate means, that the files get copy to both nodes, > but I would like to have them independent, and I move the vm disks to > the node how i want it. > > Theoretical I only need a solution where I can use local storage from > the nodes, but that they are reachable over the network. > > Jonathan > > 2017-11-09 11:39 GMT+01:00 Johan Bernhardsson <johan(a)kafit.se>: > > For it to work you need to have the bricks in replicate. Of brick > > on each server. > > > > If you only have two nodes. The quoum will be to low so it will set > > the gluster to failsafe mode until the other brick comes online. > > > > For it to work properly you need three nodes with one brick or two > > nodes and a third node acting as an arbiter. > > > > /Johan > > > > On Thu, 2017-11-09 at 11:35 +0100, Jon bae wrote: > > > Hello, > > > I'm very new to oVirt and glusterFS, so maybe I got something > > > wrong... > > > > > > I have the oVirt engine installed on a separate server and I have > > > also two physical nodes. On every node I configure glusterFS, the > > > volume is in distribution mode and have only one brick, from is > > > one node. Both volumes I also add to its own storage domain. > > > > > > The idea was, that both storage domains are independent from each > > > other, that I can turn of one node and only turn it on, when I > > > need it. > > > > > > But now I have the problem, that when I turn of on node, both > > > storage domains goes down. and the volume shows the the brick is > > > not available. > > > > > > Is there a way to fix this? > > > > > > Regards > > > Jonathan > > > > > > > > > _______________________________________________ > > > Users mailing list > > > Users(a)ovirt.org > > > http://lists.ovirt.org/mailman/listinfo/users > > _______________________________________________ > > Users mailing list > > Users(a)ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > >

1 0

glusterFS is not independent?
by Jon bae 09 Nov '17

09 Nov '17

Hello, I'm very new to oVirt and glusterFS, so maybe I got something wrong... I have the oVirt engine installed on a separate server and I have also two physical nodes. On every node I configure glusterFS, the volume is in distribution mode and have only one brick, from is one node. Both volumes I also add to its own storage domain. The idea was, that both storage domains are independent from each other, that I can turn of one node and only turn it on, when I need it. But now I have the problem, that when I turn of on node, both storage domains goes down. and the volume shows the the brick is not available. Is there a way to fix this? Regards Jonathan

2 1

Problem login virtengine on remote browser
by Stephen Liu 09 Nov '17

09 Nov '17

------=_Part_5253086_1942189910.1510221775640 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Hi all, Problem login virtengine on remote browser client is not authorized to request an authorization vm1 - ovirtengine on CentOS 7, Gnome desktop (internal IP 192.168.8.8) vm2 - ovirt node on CentOS 7, minimal (internal IP 192.168.8.5) Host - Ubuntu 16.04 Gnome desktop KVM vm1 =3D=3D=3D on Firefox running; ovirtengine.example.com I can login 'oVirt Open Virtualization Manager' on Firefox running; 192.168.8.5:9090 (ovirt node IP) I can login ovirt node as root Host =3D=3D=3D=3D on Firefox running; ovirtengine.example.com Server not found (Firewall of vm1 already stopped on running; # systemctl stop firewalld ) if running; 192.168.8.8 (IP of vm1) I can connect 'oVirt Open Virtualization Manager' but I can't login with fo= llowing warning: 'The client is not authorized to request an authorization. It's required to= access the system using FQDN.' on Firefox running; 192.168.8.5:9090=C2=A0 (ovirt node IP) I can login ovirt node as root Please help.=C2=A0 Thanks in advice. Regards SL ------=_Part_5253086_1942189910.1510221775640 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable <html><head></head><body><div style=3D"font-family:Helvetica Neue, Helvetic= a, Arial, sans-serif;font-size:16px;"><div>Hi all,<br><br>Problem login vir= tengine on remote browser<br>client is not authorized to request an authori= zation<br><br>vm1 - ovirtengine on CentOS 7, Gnome desktop (internal IP 192= .168.8.8)<br>vm2 - ovirt node on CentOS 7, minimal (internal IP 192.168.8.5= )<br>Host - Ubuntu 16.04 Gnome desktop<br>KVM<br><div><br></div><div><br></= div>vm1<br>=3D=3D=3D<br>on Firefox running;<br>ovirtengine.example.com<br>I= can login 'oVirt Open Virtualization Manager'<br><br>on Firefox running;<b= r>192.168.8.5:9090 (ovirt node IP)<br>I can login ovirt node as root<br><di= v><br></div><div><br></div>Host<br>=3D=3D=3D=3D<br>on Firefox running;<br>o= virtengine.example.com<br>Server not found<br>(Firewall of vm1 already stop= ped on running;<br># systemctl stop firewalld )<br><br>if running;<br>192.1= 68.8.8 (IP of vm1)<br>I can connect 'oVirt Open Virtualization Manager' but= I can't login with following warning:<br>'The client is not authorized to = request an authorization. It's required to access the system using FQDN.'<b= r><br>on Firefox running;<br>192.168.8.5:9090  (ovirt node IP)<br>I ca= n login ovirt node as root<br><br><br>Please help.  Thanks in advice.<= br><br><br>Regards<br>SL<br><br><br></div></div></body></html> ------=_Part_5253086_1942189910.1510221775640--

1 0