- Users - oVirt List Archives

Hosted engine already imported
by Jamie Lawrence 04 May '17

04 May '17

Hi all, In my hopefully-near-complete quest to automate Ovirt configuration in our environment, I’m very close. One outstanding issue that remains is that, even though the hosted engine storage domain actually was imported and shows in the GUI, some part of Ovirt appears to think that hasn’t happened yet. In the GUI, a periodic error is logged: “The Hosted Engine Storage Domain doesn’t exist. It will be imported automatically…” In engine.log, all I’m seeing that appears relevant is: 2017-04-25 10:28:57,988-07 INFO [org.ovirt.engine.core.bll.storage.domain.ImportHostedEngineStorageDomainCommand] (org.ovirt.thread.pool-6-thread-9) [1e44dde0] Lock Acquired to object 'EngineLock:{exclusiveLocks='[]', sharedLocks='null'}' 2017-04-25 10:28:57,992-07 WARN [org.ovirt.engine.core.bll.storage.domain.ImportHostedEngineStorageDomainCommand] (org.ovirt.thread.pool-6-thread-9) [1e44dde0] Validation of action 'ImportHostedEngineStorageDomain' failed for user SYSTEM. Reasons: VAR__ACTION__ADD,VAR__TYPE__STORAGE__DOMAIN,ACTION_TYPE_FAILED_STORAGE_DOMAIN_ALREADY_EXIST 2017-04-25 10:28:57,992-07 INFO [org.ovirt.engine.core.bll.storage.domain.ImportHostedEngineStorageDomainCommand] (org.ovirt.thread.pool-6-thread-9) [1e44dde0] Lock freed to object 'EngineLock:{exclusiveLocks='[]', sharedLocks='null’}’ Otherwise the log is pretty clean. I saw nothing of interest in the Gluster logs or the hosted-engine-ha logs on the host it is running on. It appears harmless, but then we aren’t actually using these systems yet, and in any case we don’t want the error spamming the log forever. This is 4.1.1.8-1.el7.centos, hosted engine on Centos 7.6.1311, Gluster for both the hosted engine and general data domains. Has anyone seen this before? Thanks in advance, -j

3 8

New oVirt Node 4.0.6.1 network problem with bond and many vlans - Network.service timeout failed
by Rogério Ceni Coelho 04 May '17

04 May '17

Hi oVirt admins, Yesterday, i install a new node 4.0.6.1 and after config network bond (1) + vlans ( about 50 ), network.service failed with timeout as above. All my old and working fine oVirt nodes run 4.0.5 and have the same 5 min timeout on systemd. When i try to run vms on this new server, some networks are ok and some not. I install oVirt Node with 4.0.3 on same server and this problem do not occur. How can i workaround or change timeout to network.service ? In time, there are any way to update oVirt Node to 4.0.5 from 4.0.3 install iso ? [root@prd-rbs-ovirt-kvm21-poa ~]# systemctl status network.service â— network.service - LSB: Bring up/down networking Loaded: loaded (/etc/rc.d/init.d/network; bad; vendor preset: disabled) Active: failed (Result: timeout) since Thu 2017-05-04 11:29:43 BRT; 3h 12min ago Docs: man:systemd-sysv-generator(8) Process: 7574 ExecStart=/etc/rc.d/init.d/network start (code=killed, signal=TERM) May 04 11:29:12 prd-rbs-ovirt-kvm21-poa.rbs.com.br network[7574]: Bringing up interface o_p_s_a_lb_758: [ OK ] May 04 11:29:18 prd-rbs-ovirt-kvm21-poa.rbs.com.br network[7574]: Bringing up interface o_p_sites_a_755: [ OK ] May 04 11:29:23 prd-rbs-ovirt-kvm21-poa.rbs.com.br network[7574]: Bringing up interface o_prod_app_757: [ OK ] May 04 11:29:28 prd-rbs-ovirt-kvm21-poa.rbs.com.br network[7574]: Bringing up interface o_prod_db_756: [ OK ] May 04 11:29:38 prd-rbs-ovirt-kvm21-poa.rbs.com.br network[7574]: Bringing up interface ovirtmgmt: [ OK ] *May 04 11:29:43 prd-rbs-ovirt-kvm21-poa.rbs.com.br <http://prd-rbs-ovirt-kvm21-poa.rbs.com.br> systemd[1]: network.service start operation timed out. Terminating.* May 04 11:29:43 prd-rbs-ovirt-kvm21-poa.rbs.com.br systemd[1]: Failed to start LSB: Bring up/down networking. May 04 11:29:43 prd-rbs-ovirt-kvm21-poa.rbs.com.br systemd[1]: Unit network.service entered failed state. May 04 11:29:43 prd-rbs-ovirt-kvm21-poa.rbs.com.br systemd[1]: network.service failed. May 04 11:29:43 prd-rbs-ovirt-kvm21-poa.rbs.com.br network[7574]: Bringing up interface paas_1305: [root@prd-rbs-ovirt-kvm21-poa ~]# [root@prd-rbs-ovirt-kvm21-poa ~]# systemctl restart network.service Job for network.service failed because a timeout was exceeded. See "systemctl status network.service" and "journalctl -xe" for details. [root@prd-rbs-ovirt-kvm21-poa ~]# systemctl status network.service â— network.service - LSB: Bring up/down networking Loaded: loaded (/etc/rc.d/init.d/network; bad; vendor preset: disabled) Active: failed (Result: timeout) since Thu 2017-05-04 14:55:34 BRT; 4min 46s ago Docs: man:systemd-sysv-generator(8) Process: 40810 ExecStart=/etc/rc.d/init.d/network start (code=killed, signal=TERM) May 04 14:55:21 prd-rbs-ovirt-kvm21-poa.rbs.com.br network[40810]: [ OK ] May 04 14:55:23 prd-rbs-ovirt-kvm21-poa.rbs.com.br network[40810]: Bringing up interface o_hlg_db_766: RTNETLINK answers: File exists May 04 14:55:26 prd-rbs-ovirt-kvm21-poa.rbs.com.br network[40810]: [ OK ] May 04 14:55:28 prd-rbs-ovirt-kvm21-poa.rbs.com.br network[40810]: Bringing up interface o_p_s_a_lb_758: RTNETLINK answers: File exists May 04 14:55:31 prd-rbs-ovirt-kvm21-poa.rbs.com.br network[40810]: [ OK ] May 04 14:55:33 prd-rbs-ovirt-kvm21-poa.rbs.com.br network[40810]: Bringing up interface o_p_sites_a_755: RTNETLINK answers: File exists May 04 14:55:34 prd-rbs-ovirt-kvm21-poa.rbs.com.br systemd[1]: network.service start operation timed out. Terminating. May 04 14:55:34 prd-rbs-ovirt-kvm21-poa.rbs.com.br systemd[1]: Failed to start LSB: Bring up/down networking. May 04 14:55:34 prd-rbs-ovirt-kvm21-poa.rbs.com.br systemd[1]: Unit network.service entered failed state. May 04 14:55:34 prd-rbs-ovirt-kvm21-poa.rbs.com.br systemd[1]: network.service failed. [root@prd-rbs-ovirt-kvm21-poa ~]#

1 1

Re: [ovirt-users] [ANN] oVirt 4.1.2 First Release Candidate is now available
by Sandro Bonazzola 04 May '17

04 May '17

On Thu, May 4, 2017 at 2:53 PM, Sandro Bonazzola <sbonazzo(a)redhat.com> wrote: > The oVirt Project is pleased to announce the availability of the First > Release Candidate of oVirt 4.1.2 for testing, as of May 4th, 2017 > > This is pre-release software. Please take a look at our community page[1] > to know how to ask questions and interact with developers and users. > All issues or bugs should be reported via oVirt Bugzilla[2]. > This pre-release should not to be used in production. > > This update is the first release candidate of the second in a series of > stabilization updates to the 4.1 series. > 4.1.2 brings more than 20 enhancements and more than 200 bugfixes, > including more than 80 high or urgent > severity fixes, on top of oVirt 4.1 series > > This release is available now for: > * Fedora 24 (tech preview) > * Red Hat Enterprise Linux 7.3 or later > * CentOS Linux (or similar) 7.3 or later > > This release supports Hypervisor Hosts running: > * Red Hat Enterprise Linux 7.3 or later > * CentOS Linux (or similar) 7.3 or later > * oVirt Node 4.1 > * Fedora 24 (tech preview) > > See the release notes draft [3] for installation / upgrade instructions and > a list of new features and bugs fixed. > > Notes: > - oVirt Appliance is already available > - oVirt Live has been already built [4] > - oVirt Node has been already built [4] > - An updated oVirt Windows Guest Tools ISO is now available as well[4] > introducing Windows 2016 support > > Additional Resources: > * Read more about the oVirt 4.1.2 release highlights:http://www.ovirt. > org/release/4.1.2/ > Due to an issue with the publishing of the website, looks like the release notes are not yet published. Source for the release notes is available on https://github.com/oVirt/ovirt-site/pull/935 > * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt > * Check out the latest project news on the oVirt blog: > http://www.ovirt.org/blog/ > > [1] https://www.ovirt.org/community/ > [2] https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt > [3] http://www.ovirt.org/release/4.1.2/ > [4] http://resources.ovirt.org/pub/ovirt-4.1-pre/iso/ > > > -- > > SANDRO BONAZZOLA > > ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D > > Red Hat EMEA <https://www.redhat.com/> > <https://red.ht/sig> > TRIED. TESTED. TRUSTED. <https://redhat.com/trusted> > -- SANDRO BONAZZOLA ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D Red Hat EMEA <https://www.redhat.com/> <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

2 1

[ANN] oVirt 4.1.2 First Release Candidate is now available
by Sandro Bonazzola 04 May '17

04 May '17

The oVirt Project is pleased to announce the availability of the First Release Candidate of oVirt 4.1.2 for testing, as of May 4th, 2017 This is pre-release software. Please take a look at our community page[1] to know how to ask questions and interact with developers and users. All issues or bugs should be reported via oVirt Bugzilla[2]. This pre-release should not to be used in production. This update is the first release candidate of the second in a series of stabilization updates to the 4.1 series. 4.1.2 brings more than 20 enhancements and more than 200 bugfixes, including more than 80 high or urgent severity fixes, on top of oVirt 4.1 series This release is available now for: * Fedora 24 (tech preview) * Red Hat Enterprise Linux 7.3 or later * CentOS Linux (or similar) 7.3 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.3 or later * CentOS Linux (or similar) 7.3 or later * oVirt Node 4.1 * Fedora 24 (tech preview) See the release notes draft [3] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Live has been already built [4] - oVirt Node has been already built [4] - An updated oVirt Windows Guest Tools ISO is now available as well[4] introducing Windows 2016 support Additional Resources: * Read more about the oVirt 4.1.2 release highlights:http://www.ovirt. org/release/4.1.2/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog:http://www.ovirt.org/ blog/ [1] https://www.ovirt.org/community/ [2] https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt [3] http://www.ovirt.org/release/4.1.2/ [4] http://resources.ovirt.org/pub/ovirt-4.1-pre/iso/ -- SANDRO BONAZZOLA ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D Red Hat EMEA <https://www.redhat.com/> <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

configuring gluster volumes/bricks from ovirt ??
by Matthias Leopold 04 May '17

04 May '17

hi, i'm trying to get into this gluster thing with oVirt and added a 2 node gluster cluster to my oVirt 4.1 data center (just for testing, i know it can't have HA with 2 nodes). provisioning of the storage hosts did apparently work and my storage cluster seems to be operational. i have very little understanding of glusterfs right know, but what i think i am missing in the interface is a way to configure volumes/bricks on my gluster cluster/hosts so i can use them for storage domains (i want to use a "managed gluster volume"), the drop down "Gluster" in "New domain" is empty. all i could find for storage specific UI was the "Services" tab for the storage cluster which is empty. i'm not using a hyperconverged/self-hosted setup, my engine is located on a dedicated server and i used iSCSI storage for data master domain. my hosts (for hypervisors and gluster storage) where installed on top of centos7, not using oVirt Node. does my setup make sense (it's only for testing)? do i have to configure gluster hosts manually? do i need more than 2 storage hosts when i want to configure gluster with ovirt (in hyperconverged setup 3 hosts are mandatory)? do i need oVirt Node/cockpit on the storage hosts to do further configuration? thanks a lot for reading matthias

2 9

Ovirt tasks "stuck"
by Jim Kusznir 04 May '17

04 May '17

Hi: A few days ago I attempted to create a new VM from one of the ovirt-image-repository images. I haven't really figured out how to use this reliably yet, and in this case, while trying to import an image, one of my nodes spontaneously rebooted (or at least, it looked like that to ovirt...Not sure if it had an OOM issue or something else). I assume it was the node that got the task of importing those images, as ever since then (several days now), on my management screen under "Tasks" it shows the attempted imports, still stuck in "processing". I'm quite certain its not actually processing. I do believe it used some of my storage up in the partially downloaded images, though (they do show up as GlanceDisk-<numbers>, with a status of "Locked" under the main Disks tab. How do I "properly" recover from this (abort the task and delete the partial download)? Thanks! --Jim

3 4

collectd, fluentd, ...
by Troels Arvin 04 May '17

04 May '17

Hello, Setup: RHV 4.1 with full RHEL 7 servers as hypervisor hosts. I noticed an "Update available" symbol for all the hypervisor hosts. Running "yum update" on the hosts themselves didn't list any pending updates. Running "check for available updates" on the hosts in the RHV web interface resulted in a long list of software which RHV would like to add, it seems, see below. What's all that, and is it really needed? The packages: found updates for packages collectd-5.7.0-4.el7, collectd- disk-5.7.0-4.el7, collectd-netlink-5.7.0-4.el7, collectd- virt-5.7.0-4.el7, collectd-write_http-5.7.0-4.el7, fluentd-0.12.29-1.el7, libcollectdclient-5.7.0-4.el7, ruby-2.0.0.648-29.el7, ruby- irb-2.0.0.648-29.el7, ruby-libs-2.0.0.648-29.el7, rubygem- bigdecimal-1.2.0-29.el7, rubygem-cool.io-1.4.5-2.el7, rubygem-fluent- plugin-rewrite-tag-filter-1.5.5-3.el7, rubygem-fluent-plugin-secure- forward-0.4.3-2.el7, rubygem-http_parser.rb-0.6.0-3.el7, rubygem-io- console-0.4.2-29.el7, rubygem-json-1.7.7-29.el7, rubygem- msgpack-0.5.12-2.el7, rubygem-proxifier-1.0.3-2.el7, rubygem- psych-2.0.0-29.el7, rubygem-rdoc-4.0.0-29.el7, rubygem-resolve- hostname-0.0.4-1.el7, rubygem-sigdump-0.2.4-1.el7, rubygem-string- scrub-0.0.5-3.el7, rubygem-thread_safe-0.3.5-2.el7, rubygem- tzinfo-1.2.2-3.el7 -- Regards, Troels Arvin, Copenhagen

2 1

Disable guest agent needs to be installed warnings
by Michael Watters 03 May '17

03 May '17

Is there a way to disable the guest agent needs to be installed warnings in ovirt? I have guest VMs which cannot be updated due to having older operating systems installed.

1 0

cannot change cluster compatibility level
by Michael Watters 03 May '17

03 May '17

This is a multi-part message in MIME format. --------------4CB302C1E3E33583A0625CFD Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit I have a cluster of hosts that have just been upgraded to oVirt 4.1 however I am receiving an error from the engine when I attempt to upgrade the cluster compatibility level. Error while executing action: Cannot edit Cluster if some of the specified custom properties are not configured by the system. The keys are: macspoof Does anybody know how to resolve this? I don't see any settings related to MAC spoofing in the cluster configuration options. --------------4CB302C1E3E33583A0625CFD Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 8bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=utf-8"> </head> <body text="#000000" bgcolor="#FFFFFF"> I have a cluster of hosts that have just been upgraded to oVirt 4.1 however I am receiving an error from the engine when I attempt to upgrade the cluster compatibility level. <pre><span style="color: rgb(0, 0, 0); font-family: "Arial Unicode MS", Arial, sans-serif; font-size: small; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: normal; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: rgb(255, 255, 255); text-decoration-style: initial; text-decoration-color: initial; display: inline !important; float: none;">Error while executing action: Cannot edit Cluster if some of the specified custom properties are not configured by the system. The keys are: macspoof <span style="color: rgb(0, 0, 0); font-family: "Arial Unicode MS", Arial, sans-serif; font-size: small; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: normal; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: rgb(255, 255, 255); text-decoration-style: initial; text-decoration-color: initial; display: inline !important; float: none;"> </pre> Does anybody know how to resolve this? I don't see any settings related to MAC spoofing in the cluster configuration options. <pre><span style="color: rgb(0, 0, 0); font-family: "Arial Unicode MS", Arial, sans-serif; font-size: small; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: normal; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: rgb(255, 255, 255); text-decoration-style: initial; text-decoration-color: initial; display: inline !important; float: none;"></pre> </body> </html> --------------4CB302C1E3E33583A0625CFD--

2 2

Ovirt Node 4.1.1.1 installation, engine on gluster, existing disk sdb not found or filtered, deployment fails
by Oliver Dietzel 03 May '17

03 May '17

Hi, i try to set up a 3 node gluster based ovirt cluster, following this guide: https://www.ovirt.org/blog/2017/04/up-and-running-with-ovirt-4-1-and-gluste… oVirt nodes were installed with all disks available in the system, installer limited to use only /dev/sda (both sda and sdb are HPE logical volumes on a p410 raid controller) Glusterfs deployment fails in the last step before engine setup: PLAY RECAP ********************************************************************* hv1.iw : ok=1 changed=1 unreachable=0 failed=0 hv2.iw : ok=1 changed=1 unreachable=0 failed=0 hv3.iw : ok=1 changed=1 unreachable=0 failed=0 PLAY [gluster_servers] ********************************************************* TASK [Clean up filesystem signature] ******************************************* skipping: [hv1.iw] => (item=/dev/sdb) skipping: [hv2.iw] => (item=/dev/sdb) skipping: [hv3.iw] => (item=/dev/sdb) TASK [Create Physical Volume] ************************************************** failed: [hv3.iw] (item=/dev/sdb) => {"failed": true, "failed_when_result": true, "item": "/dev/sdb", "msg": " Device /dev/sdb not found (or ignored by filtering).\n", "rc": 5} failed: [hv1.iw] (item=/dev/sdb) => {"failed": true, "failed_when_result": true, "item": "/dev/sdb", "msg": " Device /dev/sdb not found (or ignored by filtering).\n", "rc": 5} failed: [hv2.iw] (item=/dev/sdb) => {"failed": true, "failed_when_result": true, "item": "/dev/sdb", "msg": " Device /dev/sdb not found (or ignored by filtering).\n", "rc": 5} But: /dev/sdb exists on all hosts [root@hv1 ~]# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 136,7G 0 disk ... sdb 8:16 0 558,9G 0 disk └─3600508b1001c350a2c1748b0a0ff3860 253:5 0 558,9G 0 mpath What can i do to make this work? ___________________________________________________________ Oliver Dietzel

2 6