- Users - oVirt List Archives

Re: [ovirt-users] LACP Bonding issue
by Bryan Sockel 21 Apr '17

21 Apr '17

This is a multi-part message in MIME format. ----_com.samsung.android.email_7589507495101660 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit That was my next thought, wanted to see if there was another way before I got to that point. -------- Original message -------- From: Derek Atkins <derek(a)ihtfp.com> Date: 4/20/17 8:12 PM (GMT-06:00) To: Bryan Sockel <Bryan.Sockel(a)altn.com> Cc: Chris Adams <cma(a)cmadams.net>, users(a)ovirt.org Subject: Re: [ovirt-users] LACP Bonding issue _____ >From : Derek Atkins [derek(a)ihtfp.com] To : Bryan Sockel [Bryan.Sockel(a)altn.com] Cc : Chris Adams [cma(a)cmadams.net] users(a)ovirt.org [users(a)ovirt.org] Date : Thursday, April 20 2017 20:11:46 For what it's worth I set up my bond0 manually on CentOS before installing ovirt hosted engine and the ovirtmgmt bridge "took over" from bond0.. But it appears to still be working. At least I've not noticed links being down, and "ifconfig" shows decent amount of traffic on both eno1 and eno2. Maybe wipe, re-install, configure it manually, and then install ovirt? -derek On Thu, April 20, 2017 8:58 pm, Bryan Sockel wrote: > We checked the port groups, and servers are cabled correctly. > > After server is rebooted, em1 is the only interface passing traffic. > Other 3 nics sitting idle. We can down each port on the switch and > confirm it is down on the server. > > > I am pretty sure it is related to the bridge that was created to pass > vm-host-altn traffic when the appliance was first installed. > > > > -------- Original message -------- > From: Chris Adams > Date: 4/20/17 5:40 PM (GMT-06:00) > To: users(a)ovirt.org > Subject: Re: [ovirt-users] LACP Bonding issue > > _____ > > From : Chris Adams [cma(a)cmadams.net] > To : users(a)ovirt.org [users(a)ovirt.org] > Date : Thursday, April 20 2017 17:40:25 > Once upon a time, Bryan Sockel said: >> It seems that is some disconnect between my network bridge, the bond > and my >> interfaces. I would like to some how get my bond to use all 4 > interfaces. >> On reboot, it always seems to reset consistently to EM1. > > Are you sure the switch side is all the same LACP group? Sounds like > one port may accidentally be in a separate group, and that happens to be > em1. > > You might try swapping wires between em1 and another port and reboot and > see which ports come up - if all but the port with the wire formerly in > em1 come up, it points to the switch config. > > -- > Chris Adams > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -- Derek Atkins 617-623-3745 derek(a)ihtfp.com www.ihtfp.com Computer and Internet Security Consultant ----_com.samsung.android.email_7589507495101660 Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: quoted-printable <html><head><meta http-equiv=3D"Content-Type" content=3D"text/html; = charset=3DUTF-8"></head><body><div>That was my next thought, wanted to = see if there was another way before I got to that = point.</div><div> </div><div> </div><div>-------- Original message --------</div><div>From: Derek Atkins = <derek(a)ihtfp.com> </div><div>Date: 4/20/17 8:12 PM (GMT-06:00) = </div><div>To: Bryan Sockel <Bryan.Sockel(a)altn.com> </div><div>Cc: = Chris Adams <cma(a)cmadams.net>, users(a)ovirt.org </div><div>Subject: = Re: [ovirt-users] LACP Bonding issue </div><div> </div><div = style=3D"margin-left:2px;padding-left:2px;border-left:1px solid = #202020;"><div style=3D"font-size: 10pt; background-color: #ffffff; = color: #000000; font-weight: 400; font-family: = Tahoma,Arial,Verdana,sans-serif;" ><hr /><div>From : Derek Atkins = [derek(a)ihtfp.com]</div><div>To : = Bryan Sockel [Bryan.Sockel(a)altn.com]</div><div>Cc : Chris Adams [cma(a)cmadams.net] = users(a)ovirt.org [users(a)ovirt.org]</div><div>Date : Thursday, April 20 2017 20:11:46</div></div>=0A= <pre>For what it's worth I set up my bond0 manually on CentOS before = installing ovirt hosted engine and the ovirtmgmt bridge "took over" from bond0.. = But it appears to still be working. At least I've not noticed links being down, and "ifconfig" shows decent amount of traffic on both eno1 and = eno2. Maybe wipe, re-install, configure it manually, and then install ovirt? -derek On Thu, April 20, 2017 8:58 pm, Bryan Sockel wrote: > We checked the port groups, and servers are cabled correctly. > > After server is rebooted, em1 is the only interface passing traffic. > Other 3 nics sitting idle. We can down each port on the switch and > confirm it is down on the server. > > > I am pretty sure it is related to the bridge that was created to pass > vm-host-altn traffic when the appliance was first installed. > > > > -------- Original message -------- > From: Chris Adams <cma(a)cmadams.net> > Date: 4/20/17 5:40 PM (GMT-06:00) > To: users(a)ovirt.org > Subject: Re: [ovirt-users] LACP Bonding issue > > _____ > > From : Chris Adams [cma(a)cmadams.net] > To : users(a)ovirt.org [users(a)ovirt.org] > Date : Thursday, April 20 2017 17:40:25 > Once upon a time, Bryan Sockel said: >> It seems that is some disconnect between my network bridge, the bond > and my >> interfaces. I would like to some how get my bond to use all 4 > interfaces. >> On reboot, it always seems to reset consistently to EM1. > > Are you sure the switch side is all the same LACP group? Sounds like > one port may accidentally be in a separate group, and that happens to = be > em1. > > You might try swapping wires between em1 and another port and reboot = and > see which ports come up - if all but the port with the wire formerly = in > em1 come up, it points to the switch config. > > -- > Chris Adams > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > --=20 Derek Atkins 617-623-3745 derek(a)ihtfp.com www.ihtfp.com Computer and Internet Security Consultant </pre></div></body></html> ----_com.samsung.android.email_7589507495101660--

2 1

Kill a long running task in oVirt 4.0.5
by Anantha Raghava 21 Apr '17

21 Apr '17

This is a multi-part message in MIME format. --------------30956AD1EBBE67730691082E Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Hi, We are using oVirt 4.0.5. I tried to import an exported VM into the oVirt infrastructure. The process started and from last 24 hrs, it is still running and I am unable to kill it either. I tried to use "stopTask" command, but host is reporting "stopTask" command is available. How do we kill the long running task? -- Thanks & Regards, Anantha Raghava DISCLAIMER: This e-mail communication and any attachments may be privileged and confidential to eXza Technology Consulting & Services, and are intended only for the use of the recipients named above If you are not the addressee you may not copy, forward, disclose or use any part of it. If you have received this message in error, please delete it and all copies from your system and notify the sender immediately by return e-mail. Internet communications cannot be guaranteed to be timely, secure, error or virus-free. The sender does not accept liability for any errors or omissions. Do not print this e-mail unless required. Save Paper & trees. --------------30956AD1EBBE67730691082E Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=utf-8"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hi, We are using oVirt 4.0.5. I tried to import an exported VM into the oVirt infrastructure. The process started and from last 24 hrs, it is still running and I am unable to kill it either. I tried to use "stopTask" command, but host is reporting "stopTask" command is available. How do we kill the long running task? <div class="moz-signature">-- Thanks & Regards, <address style="line-height: 100%">Anantha Raghava</address> DISCLAIMER: This e-mail communication and any attachments may be privileged and confidential to eXza Technology Consulting & Services, and are intended only for the use of the recipients named above If you are not the addressee you may not copy, forward, disclose or use any part of it. If you have received this message in error, please delete it and all copies from your system and notify the sender immediately by return e-mail. Internet communications cannot be guaranteed to be timely, secure, error or virus-free. The sender does not accept liability for any errors or omissions. Do not print this e-mail unless required. Save Paper & trees. </div> </body> </html> --------------30956AD1EBBE67730691082E--

1 0

Hosted engine Single Sign-On to VM with freeIPA not working
by Paul 21 Apr '17

21 Apr '17

This is a multipart message in MIME format. ------=_NextPart_000_0050_01D18069.35C995E0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hi, I am having an issue with getting SSO to work when a standard user(UserRole) logs in to the UserPortal. The user has permission to use only this VM, so after login the console is automatically opened for that VM. Problem is that it doesn't login on the VM system with the provided credentials. Manual login at the console works without any issues. HBAC-rule check on IPA shows access is granted. Client has SELINUX in permissive mode and a disabled firewalld. On the client side I do see some PAM related errors in the logs (see details below). Extensive Google search on error 17 "Failure setting user credentials" didn't show helpful information :-( AFAIK this is did a pretty standard set-up, all working with RH-family products. I would expect others to encounter this issue as well. If someone knows any solution or has some directions to fix this it would be greatly appreciated. Thanks, Paul ------------------------------------------------------ System setup: I have 3 systems The connection between the Engine and IPA is working fine. (I can log in with IPA users etc.) Connection is made according to this document: https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Virtualizat ion/3.6/html-single/Administration_Guide/index.html#sect-Configuring_an_Exte rnal_LDAP_Provider Configuration of the client is done according to this document: https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Virtualizat ion/3.6/html/Virtual_Machine_Management_Guide/chap-Additional_Configuration. html#sect-Configuring_Single_Sign-On_for_Virtual_Machines --- Hosted Engine: [root@engine ~]# cat /etc/redhat-release CentOS Linux release 7.2.1511 (Core) [root@engine ~]# uname -a Linux engine.DOMAIN.COM 3.10.0-327.10.1.el7.x86_64 #1 SMP Tue Feb 16 17:03:50 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux [root@engine ~]# rpm -qa | grep ovirt ovirt-vmconsole-1.0.0-1.el7.centos.noarch ovirt-engine-restapi-3.6.2.6-1.el7.centos.noarch ovirt-setup-lib-1.0.1-1.el7.centos.noarch ovirt-engine-setup-plugin-ovirt-engine-common-3.6.3.4-1.el7.centos.noarch ovirt-engine-setup-3.6.3.4-1.el7.centos.noarch ovirt-image-uploader-3.6.0-1.el7.centos.noarch ovirt-engine-extension-aaa-jdbc-1.0.5-1.el7.noarch ovirt-host-deploy-1.4.1-1.el7.centos.noarch ovirt-engine-extension-aaa-ldap-setup-1.1.2-1.el7.centos.noarch ovirt-engine-wildfly-overlay-8.0.4-1.el7.noarch ovirt-engine-wildfly-8.2.1-1.el7.x86_64 ovirt-vmconsole-proxy-1.0.0-1.el7.centos.noarch ovirt-engine-tools-3.6.2.6-1.el7.centos.noarch ovirt-engine-dbscripts-3.6.2.6-1.el7.centos.noarch ovirt-engine-backend-3.6.2.6-1.el7.centos.noarch ovirt-engine-3.6.2.6-1.el7.centos.noarch ovirt-engine-extension-aaa-ldap-1.1.2-1.el7.centos.noarch ovirt-engine-setup-base-3.6.3.4-1.el7.centos.noarch ovirt-engine-setup-plugin-ovirt-engine-3.6.3.4-1.el7.centos.noarch ovirt-engine-setup-plugin-websocket-proxy-3.6.3.4-1.el7.centos.noarch ovirt-engine-vmconsole-proxy-helper-3.6.3.4-1.el7.centos.noarch ovirt-engine-cli-3.6.2.0-1.el7.centos.noarch ovirt-host-deploy-java-1.4.1-1.el7.centos.noarch ovirt-engine-userportal-3.6.2.6-1.el7.centos.noarch ovirt-engine-webadmin-portal-3.6.2.6-1.el7.centos.noarch ovirt-guest-agent-common-1.0.11-1.el7.noarch ovirt-release36-003-1.noarch ovirt-iso-uploader-3.6.0-1.el7.centos.noarch ovirt-engine-lib-3.6.3.4-1.el7.centos.noarch ovirt-engine-sdk-python-3.6.3.0-1.el7.centos.noarch ovirt-engine-setup-plugin-vmconsole-proxy-helper-3.6.3.4-1.el7.centos.noarch ovirt-engine-websocket-proxy-3.6.3.4-1.el7.centos.noarch ovirt-log-collector-3.6.1-1.el7.centos.noarch ovirt-engine-extensions-api-impl-3.6.3.4-1.el7.centos.noarch --- FreeIPA: [root@ipa01 ~]# cat /etc/redhat-release CentOS Linux release 7.2.1511 (Core) [root@ipa01 ~]# uname -a Linux ipa01.DOMAIN.COM 3.10.0-327.10.1.el7.x86_64 #1 SMP Tue Feb 16 17:03:50 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux [root@ipa01 ~]# rpm -qa | grep ipa ipa-python-4.2.0-15.el7_2.6.x86_64 ipa-client-4.2.0-15.el7_2.6.x86_64 python-libipa_hbac-1.13.0-40.el7_2.1.x86_64 python-iniparse-0.4-9.el7.noarch libipa_hbac-1.13.0-40.el7_2.1.x86_64 sssd-ipa-1.13.0-40.el7_2.1.x86_64 ipa-admintools-4.2.0-15.el7_2.6.x86_64 ipa-server-4.2.0-15.el7_2.6.x86_64 ipa-server-dns-4.2.0-15.el7_2.6.x86_64 --- Client: [root@test06 ~]# cat /etc/redhat-release CentOS Linux release 7.2.1511 (Core) [root@test06 ~]# uname -a Linux test06.DOMAIN.COM 3.10.0-327.10.1.el7.x86_64 #1 SMP Tue Feb 16 17:03:50 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux [root@test06 ~]# rpm -qa | grep ipa python-libipa_hbac-1.13.0-40.el7_2.1.x86_64 python-iniparse-0.4-9.el7.noarch sssd-ipa-1.13.0-40.el7_2.1.x86_64 ipa-client-4.2.0-15.0.1.el7.centos.6.x86_64 libipa_hbac-1.13.0-40.el7_2.1.x86_64 ipa-python-4.2.0-15.0.1.el7.centos.6.x86_64 device-mapper-multipath-0.4.9-85.el7.x86_64 device-mapper-multipath-libs-0.4.9-85.el7.x86_64 [root@test06 ~]# rpm -qa | grep guest-agent qemu-guest-agent-2.3.0-4.el7.x86_64 ovirt-guest-agent-pam-module-1.0.11-1.el7.x86_64 ovirt-guest-agent-gdm-plugin-1.0.11-1.el7.noarch ovirt-guest-agent-common-1.0.11-1.el7.noarch --------------------------------------------------- Relevant logs: --- Engine: //var/log/ovirt-engine/engine 2016-03-17 15:22:10,516 INFO [org.ovirt.engine.core.bll.aaa.LoginUserCommand] (default task-22) [] Running command: LoginUserCommand internal: false. 2016-03-17 15:22:10,568 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-22) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: User test6@DOMAIN logged in. 2016-03-17 15:22:13,795 WARN [org.ovirt.engine.core.dal.job.ExecutionMessageDirector] (default task-6) [7400ae46] The message key 'VmLogon' is missing from 'bundles/ExecutionMessages' 2016-03-17 15:22:13,839 INFO [org.ovirt.engine.core.bll.VmLogonCommand] (default task-6) [7400ae46] Running command: VmLogonCommand internal: false. Entities affected : ID: 64a84b40-6050-4a96-a59d-d557a317c38c Type: VMAction group CONNECT_TO_VM with role type USER 2016-03-17 15:22:13,842 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.VmLogonVDSCommand] (default task-6) [7400ae46] START, VmLogonVDSCommand(HostName = host01, VmLogonVDSCommandParameters:{runAsync='true', hostId='225157c0-224b-4aa6-9210-db4de7c7fc30', vmId='64a84b40-6050-4a96-a59d-d557a317c38c', domain='DOMAIN-authz', password='***', userName='test6@DOMAIN'}), log id: 2015a1e0 2016-03-17 15:22:14,848 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.VmLogonVDSCommand] (default task-6) [7400ae46] FINISH, VmLogonVDSCommand, log id: 2015a1e0 2016-03-17 15:22:15,317 INFO [org.ovirt.engine.core.bll.SetVmTicketCommand] (default task-18) [10dad788] Running command: SetVmTicketCommand internal: true. Entities affected : ID: 64a84b40-6050-4a96-a59d-d557a317c38c Type: VMAction group CONNECT_TO_VM with role type USER 2016-03-17 15:22:15,322 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand] (default task-18) [10dad788] START, SetVmTicketVDSCommand(HostName = host01, SetVmTicketVDSCommandParameters:{runAsync='true', hostId='225157c0-224b-4aa6-9210-db4de7c7fc30', vmId='64a84b40-6050-4a96-a59d-d557a317c38c', protocol='SPICE', ticket='rd8avqvdBnRl', validTime='120', userName='test6', userId='10b2da3e-6401-4a09-a330-c0780bc0faef', disconnectAction='LOCK_SCREEN'}), log id: 72efb73b 2016-03-17 15:22:16,340 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand] (default task-18) [10dad788] FINISH, SetVmTicketVDSCommand, log id: 72efb73b 2016-03-17 15:22:16,377 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-18) [10dad788] Correlation ID: 10dad788, Call Stack: null, Custom Event ID: -1, Message: User test6@DOMAIN initiated console session for VM test06 2016-03-17 15:22:19,418 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-53) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: User test6@DOMAIN-authz is connected to VM test06. --- Client: /var/log/ovirt-guest-agent/ovirt-guest-agent.log MainThread::INFO::2016-03-17 15:20:58,145::ovirt-guest-agent::57::root::Starting oVirt guest agent CredServer::INFO::2016-03-17 15:20:58,214::CredServer::257::root::CredServer is running... Dummy-1::INFO::2016-03-17 15:20:58,216::OVirtAgentLogic::294::root::Received an external command: lock-screen... Dummy-1::INFO::2016-03-17 15:22:13,104::OVirtAgentLogic::294::root::Received an external command: login... Dummy-1::INFO::2016-03-17 15:22:13,104::CredServer::207::root::The following users are allowed to connect: [0] Dummy-1::INFO::2016-03-17 15:22:13,104::CredServer::273::root::Opening credentials channel... Dummy-1::INFO::2016-03-17 15:22:13,105::CredServer::132::root::Emitting user authenticated signal (651416). CredChannel::INFO::2016-03-17 15:22:13,188::CredServer::225::root::Incomming connection from user: 0 process: 2570 CredChannel::INFO::2016-03-17 15:22:13,188::CredServer::232::root::Sending user's credential (token: 651416) Dummy-1::INFO::2016-03-17 15:22:13,189::CredServer::277::root::Credentials channel was closed. /var/log/secure Mar 17 15:21:07 test06 gdm-launch-environment]: pam_unix(gdm-launch-environment:session): session opened for user gdm by (uid=0) Mar 17 15:21:10 test06 polkitd[749]: Registered Authentication Agent for unix-session:c1 (system bus name :1.34 [gnome-shell --mode=gdm], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) Mar 17 15:22:13 test06 gdm-ovirtcred]: pam_sss(gdm-ovirtcred:auth): authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= user=test6 Mar 17 15:22:13 test06 gdm-ovirtcred]: pam_sss(gdm-ovirtcred:auth): received for user test6: 17 (Failure setting user credentials) /var/log/sssd/krb5_child.log (debug-level 10) (Thu Mar 17 15:22:13 2016) [[sssd[krb5_child[2575]]]] [get_and_save_tgt] (0x0020): 1234: [-1765328360][Preauthentication failed] (Thu Mar 17 15:22:13 2016) [[sssd[krb5_child[2575]]]] [map_krb5_error] (0x0020): 1303: [-1765328360][Preauthentication failed] (Thu Mar 17 15:22:13 2016) [[sssd[krb5_child[2575]]]] [k5c_send_data] (0x0200): Received error code 1432158215 (Thu Mar 17 15:22:13 2016) [[sssd[krb5_child[2575]]]] [pack_response_packet] (0x2000): response packet size: [4] (Thu Mar 17 15:22:13 2016) [[sssd[krb5_child[2575]]]] [k5c_send_data] (0x4000): Response sent. (Thu Mar 17 15:22:13 2016) [[sssd[krb5_child[2575]]]] [main] (0x0400): krb5_child completed successfully /var/log/sssd/sssd_DOMAIN.COM.log (debug-level 10) (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [be_pam_handler] (0x0100): Got request with the following data (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): command: PAM_AUTHENTICATE (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): domain: DOMAIN.COM (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): user: test6 (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): service: gdm-ovirtcred (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): tty: (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): ruser: (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): rhost: (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): authtok type: 1 (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): newauthtok type: 0 (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): priv: 1 (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): cli_pid: 2570 (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): logon name: not set (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [krb5_auth_queue_send] (0x1000): Wait queue of user [test6] is empty, running request [0x7fe30df03cc0] immediately. (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [krb5_setup] (0x4000): No mapping for: test6 (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [ldb] (0x4000): Added timed event "ltdb_callback": 0x7fe30df07120 (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [ldb] (0x4000): Added timed event "ltdb_timeout": 0x7fe30df16590 (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [ldb] (0x4000): Running timer event 0x7fe30df07120 "ltdb_callback" (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [ldb] (0x4000): Destroying timer event 0x7fe30df16590 "ltdb_timeout" (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [ldb] (0x4000): Ending timer event 0x7fe30df07120 "ltdb_callback" (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [fo_resolve_service_send] (0x0100): Trying to resolve service 'IPA' (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [get_server_status] (0x1000): Status of server 'ipa01.DOMAIN.COM' is 'working' (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [get_port_status] (0x1000): Port status of port 389 for server 'ipa01.DOMAIN.COM' is 'working' (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [fo_resolve_service_activate_timeout] (0x2000): Resolve timeout set to 6 seconds (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [resolve_srv_send] (0x0200): The status of SRV lookup is resolved (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [get_server_status] (0x1000): Status of server 'ipa01.DOMAIN.COM' is 'working' (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [be_resolve_server_process] (0x1000): Saving the first resolved server (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [be_resolve_server_process] (0x0200): Found address for server ipa01.DOMAIN.COM: [10.0.1.21] TTL 1200 (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [ipa_resolve_callback] (0x0400): Constructed uri 'ldap://ipa01.DOMAIN.COM' (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sss_krb5_realm_has_proxy] (0x0040): profile_get_values failed. (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [child_handler_setup] (0x2000): Setting up signal handler up for pid [2575] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [child_handler_setup] (0x2000): Signal handler set up for pid [2575] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [write_pipe_handler] (0x0400): All data has been sent! (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [child_sig_handler] (0x1000): Waiting for child [2575]. (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [child_sig_handler] (0x0100): child [2575] finished successfully. (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [read_pipe_handler] (0x0400): EOF received, client finished (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [check_wait_queue] (0x1000): Wait queue for user [test6] is empty. (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [krb5_auth_queue_done] (0x1000): krb5_auth_queue request [0x7fe30df03cc0] done. (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_id_op_connect_step] (0x4000): reusing cached connection (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_print_server] (0x2000): Searching 10.0.1.21 (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_get_generic_ext_step] (0x0400): calling ldap_search_ext with [(&(cn=ipaConfig)(objectClass=ipaGuiConfig))][cn=etc,dc=DOMAIN,dc=com]. (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_get_generic_ext_step] (0x1000): Requesting attrs: [ipaMigrationEnabled] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_get_generic_ext_step] (0x1000): Requesting attrs: [ipaSELinuxUserMapDefault] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_get_generic_ext_step] (0x1000): Requesting attrs: [ipaSELinuxUserMapOrder] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_get_generic_ext_step] (0x2000): ldap_search_ext called, msgid = 122 (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_op_add] (0x2000): New operation 122 timeout 60 (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_process_result] (0x2000): Trace: sh[0x7fe30deef090], connected[1], ops[0x7fe30df094a0], ldap[0x7fe30def2920] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_process_message] (0x4000): Message type: [LDAP_RES_SEARCH_ENTRY] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_parse_entry] (0x1000): OriginalDN: [cn=ipaConfig,cn=etc,dc=DOMAIN,dc=com]. (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_parse_range] (0x2000): No sub-attributes for [ipaMigrationEnabled] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_parse_range] (0x2000): No sub-attributes for [ipaSELinuxUserMapDefault] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_parse_range] (0x2000): No sub-attributes for [ipaSELinuxUserMapOrder] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_process_result] (0x2000): Trace: sh[0x7fe30deef090], connected[1], ops[0x7fe30df094a0], ldap[0x7fe30def2920] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_process_message] (0x4000): Message type: [LDAP_RES_SEARCH_RESULT] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_get_generic_op_finished] (0x0400): Search result: Success(0), no errmsg set (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_op_destructor] (0x2000): Operation 122 finished (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_id_op_destroy] (0x4000): releasing operation connection (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [ipa_get_migration_flag_done] (0x0100): Password migration is not enabled. (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [be_pam_handler_callback] (0x0100): Backend returned: (0, 17, <NULL>) [Success (Failure setting user credentials)] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [be_pam_handler_callback] (0x0100): Sending result [17][DOMAIN.COM] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [be_pam_handler_callback] (0x0100): Sent result [17][DOMAIN.COM] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_process_result] (0x2000): Trace: sh[0x7fe30deef090], connected[1], ops[(nil)], ldap[0x7fe30def2920] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_process_result] (0x2000): Trace: ldap_result found nothing! ------=_NextPart_000_0050_01D18069.35C995E0 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" = xmlns:o=3D"urn:schemas-microsoft-com:office:office" = xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" = xmlns=3D"http://www.w3.org/TR/REC-html40"><head><meta = http-equiv=3DContent-Type content=3D"text/html; = charset=3Dus-ascii"><meta name=3DGenerator content=3D"Microsoft Word 15 = (filtered medium)"><style></style></head><body lang=3DEN-US = link=3D"#0563C1" vlink=3D"#954F72"><div class=3DWordSection1>Hi,<o:p></o:p><o:p> </o:p>I am having = an issue with getting SSO to work when a standard user(UserRole) logs in = to the UserPortal.<o:p></o:p>The user has = permission to use only this VM, so after login the console is = automatically opened for that VM.<o:p></o:p>Problem is that it doesn't login on the VM system with = the provided credentials. Manual login at the console works without any = issues. <o:p></o:p>HBAC-rule check on IPA shows = access is granted. Client has SELINUX in permissive mode and a disabled = firewalld. <o:p></o:p><o:p> </o:p>On the client side I do see some PAM related errors in = the logs (see details below). Extensive Google search on error 17 = "Failure setting user credentials" didn't show helpful = information :-(<o:p></o:p><o:p> </o:p>AFAIK this = is did a pretty standard set-up, all working with RH-family products. I = would expect others to encounter this issue as well. <o:p></o:p>If someone knows any solution or has some directions = to fix this it would be greatly appreciated.<o:p></o:p><o:p> </o:p>Thanks,<o:p></o:p><o:p> </o:p>Paul<o:p></o:p><o:p> </o:p>------------------------------------------------------<= o:p></o:p>System setup: I have 3 systems = <o:p></o:p><o:p> </o:p>The connection between the Engine and IPA is working = fine. (I can log in with IPA users etc.) Connection is made according to = this document: = https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Virtuali= zation/3.6/html-single/Administration_Guide/index.html#sect-Configuring_a= n_External_LDAP_Provider<o:p></o:p><o:p> </o:p>Configuration of the client is done according to this = document: = https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Virtuali= zation/3.6/html/Virtual_Machine_Management_Guide/chap-Additional_Configur= ation.html#sect-Configuring_Single_Sign-On_for_Virtual_Machines<o:p></o:p= ><o:p> </o:p>--- = Hosted Engine:<o:p></o:p>[root@engine ~]# cat = /etc/redhat-release<o:p></o:p>CentOS Linux = release 7.2.1511 (Core)<o:p></o:p>[root@engine = ~]# uname -a<o:p></o:p>Linux engine.DOMAIN.COM = 3.10.0-327.10.1.el7.x86_64 #1 SMP Tue Feb 16 17:03:50 UTC 2016 x86_64 = x86_64 x86_64 GNU/Linux<o:p></o:p>[root@engine = ~]# rpm -qa | grep ovirt<o:p></o:p>ovirt-vmconsole-1.0.0-1.el7.centos.noarch<o:p></o:p></p= >ovirt-engine-restapi-3.6.2.6-1.el7.centos.noarch<o:p></= o:p>ovirt-setup-lib-1.0.1-1.el7.centos.noarch<o:p></o:p></p= >ovirt-engine-setup-plugin-ovirt-engine-common-3.6.3.4-1= .el7.centos.noarch<o:p></o:p>ovirt-engine-setup-3.6.3.4-1.el7.centos.noarch<o:p></o:= p>ovirt-image-uploader-3.6.0-1.el7.centos.noarch<o:p></o:= p>ovirt-engine-extension-aaa-jdbc-1.0.5-1.el7.noarch<o:p>= </o:p>ovirt-host-deploy-1.4.1-1.el7.centos.noarch<o:p></o:p><= /p>ovirt-engine-extension-aaa-ldap-setup-1.1.2-1.el7.cento= s.noarch<o:p></o:p>ovirt-engine-wildfly-overlay-8.0.4-1.el7.noarch<o:p></o= :p>ovirt-engine-wildfly-8.2.1-1.el7.x86_64<o:p></o:p><= p = class=3DMsoNormal>ovirt-vmconsole-proxy-1.0.0-1.el7.centos.noarch<o:p></o= :p>ovirt-engine-tools-3.6.2.6-1.el7.centos.noarch<o:p></o:= p>ovirt-engine-dbscripts-3.6.2.6-1.el7.centos.noarch<o:p>= </o:p>ovirt-engine-backend-3.6.2.6-1.el7.centos.noarch<o:p></= o:p>ovirt-engine-3.6.2.6-1.el7.centos.noarch<o:p></o:p>= ovirt-engine-extension-aaa-ldap-1.1.2-1.el7.centos.noar= ch<o:p></o:p>ovirt-engine-setup-base-3.6.3.4-1.el7.centos.noarch<o:p= ></o:p>ovirt-engine-setup-plugin-ovirt-engine-3.6.3.4-1.el7.ce= ntos.noarch<o:p></o:p>ovirt-engine-setup-plugin-websocket-proxy-3.6.3.4-1.el7= .centos.noarch<o:p></o:p>ovirt-engine-vmconsole-proxy-helper-3.6.3.4-1.el7.cento= s.noarch<o:p></o:p>ovirt-engine-cli-3.6.2.0-1.el7.centos.noarch<o:p></o:p>= ovirt-host-deploy-java-1.4.1-1.el7.centos.noarch<o:p></= o:p>ovirt-engine-userportal-3.6.2.6-1.el7.centos.noarch<o:p= ></o:p>ovirt-engine-webadmin-portal-3.6.2.6-1.el7.centos.noarc= h<o:p></o:p>ovirt-guest-agent-common-1.0.11-1.el7.noarch<o:p></o:p>= ovirt-release36-003-1.noarch<o:p></o:p>ovirt-iso-uploader-3.6.0-1.el7.centos.noarch<o:p></o:p>= ovirt-engine-lib-3.6.3.4-1.el7.centos.noarch<o:p></o:p>= ovirt-engine-sdk-python-3.6.3.0-1.el7.centos.noarch<o:p= ></o:p>ovirt-engine-setup-plugin-vmconsole-proxy-helper-3.6.3.= 4-1.el7.centos.noarch<o:p></o:p>ovirt-engine-websocket-proxy-3.6.3.4-1.el7.centos.noarc= h<o:p></o:p>ovirt-log-collector-3.6.1-1.el7.centos.noarch<o:p></o:p= >ovirt-engine-extensions-api-impl-3.6.3.4-1.el7.centos.n= oarch<o:p></o:p><o:p> </o:p>--- FreeIPA:<o:p></o:p>[root@ipa01 ~]# cat = /etc/redhat-release<o:p></o:p>CentOS Linux = release 7.2.1511 (Core) <o:p></o:p>[root@ipa01 = ~]#  uname -a<o:p></o:p>Linux = ipa01.DOMAIN.COM 3.10.0-327.10.1.el7.x86_64 #1 SMP Tue Feb 16 17:03:50 = UTC 2016 x86_64 x86_64 x86_64 GNU/Linux<o:p></o:p>[root@ipa01 ~]# rpm -qa | grep ipa<o:p></o:p>ipa-python-4.2.0-15.el7_2.6.x86_64<o:p></o:p>ipa-client-4.2.0-15.el7_2.6.x86_64<o:p></o:p>python-libipa_hbac-1.13.0-40.el7_2.1.x86_64<o:p></o:p><= /p>python-iniparse-0.4-9.el7.noarch<o:p></o:p>libipa_hbac-1.13.0-40.el7_2.1.x86_64<o:p></o:p>sssd-ipa-1.13.0-40.el7_2.1.x86_64<o:p></o:p>ipa-admintools-4.2.0-15.el7_2.6.x86_64<o:p></o:p><p= class=3DMsoNormal>ipa-server-4.2.0-15.el7_2.6.x86_64<o:p></o:p>ipa-server-dns-4.2.0-15.el7_2.6.x86_64<o:p></o:p><p= class=3DMsoNormal><o:p> </o:p>--- = Client:<o:p></o:p>[root@test06 ~]# cat = /etc/redhat-release<o:p></o:p>CentOS Linux = release 7.2.1511 (Core) <o:p></o:p>[root@test06 = ~]# uname -a<o:p></o:p>Linux test06.DOMAIN.COM = 3.10.0-327.10.1.el7.x86_64 #1 SMP Tue Feb 16 17:03:50 UTC 2016 x86_64 = x86_64 x86_64 GNU/Linux<o:p></o:p>[root@test06 = ~]# rpm -qa | grep ipa<o:p></o:p>python-libipa_hbac-1.13.0-40.el7_2.1.x86_64<o:p></o:p><= /p>python-iniparse-0.4-9.el7.noarch<o:p></o:p>sssd-ipa-1.13.0-40.el7_2.1.x86_64<o:p></o:p>ipa-client-4.2.0-15.0.1.el7.centos.6.x86_64<o:p></o:p><= /p>libipa_hbac-1.13.0-40.el7_2.1.x86_64<o:p></o:p>ipa-python-4.2.0-15.0.1.el7.centos.6.x86_64<o:p></o:p><= /p>device-mapper-multipath-0.4.9-85.el7.x86_64<o:p></o:p><= /p>device-mapper-multipath-libs-0.4.9-85.el7.x86_64<o:p></= o:p>[root@test06 ~]# rpm -qa | grep = guest-agent<o:p></o:p>qemu-guest-agent-2.3.0-4.el7.x86_64<o:p></o:p>ovirt-guest-agent-pam-module-1.0.11-1.el7.x86_64<o:p></= o:p>ovirt-guest-agent-gdm-plugin-1.0.11-1.el7.noarch<o:p></= o:p>ovirt-guest-agent-common-1.0.11-1.el7.noarch<o:p></o:p>= <o:p> </o:p>---------------------------------------------------<o:p= ></o:p>Relevant logs:<o:p></o:p>--- Engine:<o:p></o:p>//var/log/ovirt-engine/engine<o:p></o:p>2016-03-17 15:22:10,516 INFO  = [org.ovirt.engine.core.bll.aaa.LoginUserCommand] (default task-22) [] = Running command: LoginUserCommand internal: false.<o:p></o:p>2016-03-17 15:22:10,568 INFO  = [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] = (default task-22) [] Correlation ID: null, Call Stack: null, Custom = Event ID: -1, Message: User test6@DOMAIN logged in.<o:p></o:p>2016-03-17 15:22:13,795 WARN  = [org.ovirt.engine.core.dal.job.ExecutionMessageDirector] (default = task-6) [7400ae46] The message key 'VmLogon' is missing from = 'bundles/ExecutionMessages'<o:p></o:p>2016-03-17 15:22:13,839 INFO  = [org.ovirt.engine.core.bll.VmLogonCommand] (default task-6) [7400ae46] = Running command: VmLogonCommand internal: false. Entities affected = :  ID: 64a84b40-6050-4a96-a59d-d557a317c38c Type: VMAction group = CONNECT_TO_VM with role type USER<o:p></o:p>2016-03-17 15:22:13,842 INFO  = [org.ovirt.engine.core.vdsbroker.vdsbroker.VmLogonVDSCommand] (default = task-6) [7400ae46] START, VmLogonVDSCommand(HostName =3D host01, = VmLogonVDSCommandParameters:{runAsync=3D'true', = hostId=3D'225157c0-224b-4aa6-9210-db4de7c7fc30', = vmId=3D'64a84b40-6050-4a96-a59d-d557a317c38c', domain=3D'DOMAIN-authz', = password=3D'***', userName=3D'test6@DOMAIN'}), log id: = 2015a1e0<o:p></o:p>2016-03-17 15:22:14,848 = INFO  [org.ovirt.engine.core.vdsbroker.vdsbroker.VmLogonVDSCommand] = (default task-6) [7400ae46] FINISH, VmLogonVDSCommand, log id: = 2015a1e0<o:p></o:p>2016-03-17 15:22:15,317 = INFO  [org.ovirt.engine.core.bll.SetVmTicketCommand] (default = task-18) [10dad788] Running command: SetVmTicketCommand internal: true. = Entities affected :  ID: 64a84b40-6050-4a96-a59d-d557a317c38c Type: = VMAction group CONNECT_TO_VM with role type USER<o:p></o:p>2016-03-17 15:22:15,322 INFO  = [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand] = (default task-18) [10dad788] START, SetVmTicketVDSCommand(HostName =3D = host01, SetVmTicketVDSCommandParameters:{runAsync=3D'true', = hostId=3D'225157c0-224b-4aa6-9210-db4de7c7fc30', = vmId=3D'64a84b40-6050-4a96-a59d-d557a317c38c', protocol=3D'SPICE', = ticket=3D'rd8avqvdBnRl', validTime=3D'120', userName=3D'test6', = userId=3D'10b2da3e-6401-4a09-a330-c0780bc0faef', = disconnectAction=3D'LOCK_SCREEN'}), log id: 72efb73b<o:p></o:p>2016-03-17 15:22:16,340 INFO  = [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand] = (default task-18) [10dad788] FINISH, SetVmTicketVDSCommand, log id: = 72efb73b<o:p></o:p>2016-03-17 15:22:16,377 = INFO  = [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] = (default task-18) [10dad788] Correlation ID: 10dad788, Call Stack: null, = Custom Event ID: -1, Message: User test6@DOMAIN initiated console = session for VM test06<o:p></o:p>2016-03-17 = 15:22:19,418 INFO  = [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] = (DefaultQuartzScheduler_Worker-53) [] Correlation ID: null, Call Stack: = null, Custom Event ID: -1, Message: User test6@DOMAIN-authz is connected = to VM test06.<o:p></o:p><o:p> </o:p>--- Client:<o:p></o:p>/var/log/ovirt-guest-agent/ovirt-guest-agent.log<o:p></= o:p>MainThread::INFO::2016-03-17 = 15:20:58,145::ovirt-guest-agent::57::root::Starting oVirt guest = agent<o:p></o:p>CredServer::INFO::2016-03-17 = 15:20:58,214::CredServer::257::root::CredServer is = running...<o:p></o:p>Dummy-1::INFO::2016-03-17 = 15:20:58,216::OVirtAgentLogic::294::root::Received an external command: = lock-screen...<o:p></o:p>Dummy-1::INFO::2016-03-17 = 15:22:13,104::OVirtAgentLogic::294::root::Received an external command: = login...<o:p></o:p>Dummy-1::INFO::2016-03-17 = 15:22:13,104::CredServer::207::root::The following users are allowed to = connect: [0]<o:p></o:p>Dummy-1::INFO::2016-03-17 = 15:22:13,104::CredServer::273::root::Opening credentials = channel...<o:p></o:p>Dummy-1::INFO::2016-03-17 = 15:22:13,105::CredServer::132::root::Emitting user authenticated signal = (651416).<o:p></o:p>CredChannel::INFO::2016-03-17 = 15:22:13,188::CredServer::225::root::Incomming connection from user: 0 = process: 2570<o:p></o:p>CredChannel::INFO::2016-03-17 = 15:22:13,188::CredServer::232::root::Sending user's credential (token: = 651416)<o:p></o:p>Dummy-1::INFO::2016-03-17 = 15:22:13,189::CredServer::277::root::Credentials channel was = closed.<o:p></o:p><o:p> </o:p>/var/log/secure<o:p></o:p>Mar = 17 15:21:07 test06 gdm-launch-environment]: = pam_unix(gdm-launch-environment:session): session opened for user gdm by = (uid=3D0)<o:p></o:p>Mar 17 15:21:10 test06 = polkitd[749]: Registered Authentication Agent for unix-session:c1 = (system bus name :1.34 [gnome-shell --mode=3Dgdm], object path = /org/freedesktop/PolicyKit1/AuthenticationAgent, locale = en_US.UTF-8)<o:p></o:p>Mar 17 15:22:13 test06 = gdm-ovirtcred]: pam_sss(gdm-ovirtcred:auth): authentication failure; = logname=3D uid=3D0 euid=3D0 tty=3D ruser=3D rhost=3D = user=3Dtest6<o:p></o:p>Mar 17 15:22:13 test06 gdm-ovirtcred]: = pam_sss(gdm-ovirtcred:auth): received for user test6: 17 (Failure = setting user credentials)<o:p></o:p><o:p> </o:p>/var/log/sssd/krb5_child.log (debug-level = 10)<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [[sssd[krb5_child[2575]]]] [get_and_save_tgt] (0x0020): 1234: = [-1765328360][Preauthentication failed]<o:p></o:p>(Thu Mar 17 15:22:13 = 2016) [[sssd[krb5_child[2575]]]] [map_krb5_error] (0x0020): 1303: = [-1765328360][Preauthentication failed]<o:p></o:p>(Thu Mar 17 15:22:13 = 2016) [[sssd[krb5_child[2575]]]] [k5c_send_data] (0x0200): Received = error code 1432158215<o:p></o:p>(Thu = Mar 17 15:22:13 2016) [[sssd[krb5_child[2575]]]] [pack_response_packet] = (0x2000): response packet size: [4]<o:p></o:p>(Thu Mar 17 15:22:13 2016) [[sssd[krb5_child[2575]]]] = [k5c_send_data] (0x4000): Response sent.<o:p></o:p>(Thu Mar 17 15:22:13 2016) [[sssd[krb5_child[2575]]]] = [main] (0x0400): krb5_child completed successfully<o:p></o:p><o:p> </o:p>/var/log/sssd/sssd_DOMAIN.COM.log (debug-level = 10)<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [be_pam_handler] (0x0100): Got request with the = following data<o:p></o:p>(Thu Mar 17 15:22:13 = 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): command: = PAM_AUTHENTICATE<o:p></o:p>(Thu Mar 17 15:22:13 = 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): domain: = DOMAIN.COM<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): user: = test6<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): service: = gdm-ovirtcred<o:p></o:p>(Thu Mar 17 15:22:13 = 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): = tty:<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): = ruser:<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): = rhost:<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): authtok type: = 1<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): newauthtok type: = 0<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): priv: = 1<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): cli_pid: = 2570<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): logon name: not = set<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [krb5_auth_queue_send] (0x1000): Wait queue of = user [test6] is empty, running request [0x7fe30df03cc0] = immediately.<o:p></o:p>(Thu Mar 17 15:22:13 = 2016) [sssd[be[DOMAIN.COM]]] [krb5_setup] (0x4000): No mapping for: = test6<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [ldb] (0x4000): Added timed event = "ltdb_callback": 0x7fe30df07120<o:p></o:p><o:p> </o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [ldb] (0x4000): Added timed event = "ltdb_timeout": 0x7fe30df16590<o:p></o:p><o:p> </o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [ldb] (0x4000): Running timer = event 0x7fe30df07120 "ltdb_callback"<o:p></o:p><o:p> </o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [ldb] (0x4000): Destroying timer = event 0x7fe30df16590 "ltdb_timeout"<o:p></o:p><o:p> </o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [ldb] (0x4000): Ending timer event = 0x7fe30df07120 "ltdb_callback"<o:p></o:p><o:p> </o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [fo_resolve_service_send] = (0x0100): Trying to resolve service 'IPA'<o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [get_server_status] (0x1000): Status of server 'ipa01.DOMAIN.COM' is = 'working'<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [get_port_status] (0x1000): Port status of port = 389 for server 'ipa01.DOMAIN.COM' is 'working'<o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [fo_resolve_service_activate_timeout] (0x2000): Resolve timeout set to 6 = seconds<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [resolve_srv_send] (0x0200): The status of SRV = lookup is resolved<o:p></o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [get_server_status] (0x1000): = Status of server 'ipa01.DOMAIN.COM' is 'working'<o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [be_resolve_server_process] (0x1000): Saving the first resolved = server<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [be_resolve_server_process] (0x0200): Found = address for server ipa01.DOMAIN.COM: [10.0.1.21] TTL = 1200<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [ipa_resolve_callback] (0x0400): Constructed uri = 'ldap://ipa01.DOMAIN.COM'<o:p></o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sss_krb5_realm_has_proxy] = (0x0040): profile_get_values failed.<o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [child_handler_setup] (0x2000): Setting up signal handler up for pid = [2575]<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [child_handler_setup] (0x2000): Signal handler = set up for pid [2575]<o:p></o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [write_pipe_handler] (0x0400): All = data has been sent!<o:p></o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [child_sig_handler] (0x1000): = Waiting for child [2575].<o:p></o:p><o:p> </o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [child_sig_handler] (0x0100): = child [2575] finished successfully.<o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [read_pipe_handler] (0x0400): EOF received, client = finished<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [check_wait_queue] (0x1000): Wait queue for user = [test6] is empty.<o:p></o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [krb5_auth_queue_done] (0x1000): = krb5_auth_queue request [0x7fe30df03cc0] done.<o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [sdap_id_op_connect_step] (0x4000): reusing cached = connection<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [sdap_print_server] (0x2000): Searching = 10.0.1.21<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [sdap_get_generic_ext_step] (0x0400): calling = ldap_search_ext with = [(&(cn=3DipaConfig)(objectClass=3DipaGuiConfig))][cn=3Detc,dc=3DDOMAI= N,dc=3Dcom].<o:p></o:p>(Thu Mar 17 15:22:13 = 2016) [sssd[be[DOMAIN.COM]]] [sdap_get_generic_ext_step] (0x1000): = Requesting attrs: [ipaMigrationEnabled]<o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [sdap_get_generic_ext_step] (0x1000): Requesting attrs: = [ipaSELinuxUserMapDefault]<o:p></o:p>(Thu Mar = 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_get_generic_ext_step] = (0x1000): Requesting attrs: [ipaSELinuxUserMapOrder]<o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [sdap_get_generic_ext_step] (0x2000): ldap_search_ext called, msgid =3D = 122<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [sdap_op_add] (0x2000): New operation 122 timeout = 60<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [sdap_process_result] (0x2000): Trace: = sh[0x7fe30deef090], connected[1], ops[0x7fe30df094a0], = ldap[0x7fe30def2920]<o:p></o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_process_message] (0x4000): = Message type: [LDAP_RES_SEARCH_ENTRY]<o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [sdap_parse_entry] (0x1000): OriginalDN: = [cn=3DipaConfig,cn=3Detc,dc=3DDOMAIN,dc=3Dcom].<o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [sdap_parse_range] (0x2000): No sub-attributes for = [ipaMigrationEnabled]<o:p></o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_parse_range] (0x2000): No = sub-attributes for [ipaSELinuxUserMapDefault]<o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [sdap_parse_range] (0x2000): No sub-attributes for = [ipaSELinuxUserMapOrder]<o:p></o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_process_result] (0x2000): = Trace: sh[0x7fe30deef090], connected[1], ops[0x7fe30df094a0], = ldap[0x7fe30def2920]<o:p></o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_process_message] (0x4000): = Message type: [LDAP_RES_SEARCH_RESULT]<o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [sdap_get_generic_op_finished] (0x0400): Search result: Success(0), no = errmsg set<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [sdap_op_destructor] (0x2000): Operation 122 = finished <o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [sdap_id_op_destroy] (0x4000): releasing = operation connection <o:p></o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [ipa_get_migration_flag_done] = (0x0100): Password migration is not enabled. <o:p></o:p>(Thu Mar 17 15:22:13 = 2016) [sssd[be[DOMAIN.COM]]] [be_pam_handler_callback] (0x0100): Backend = returned: (0, 17, <NULL>) [Success (Failure setting user = credentials)] <o:p></o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [be_pam_handler_callback] = (0x0100): Sending result [17][DOMAIN.COM] <o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [be_pam_handler_callback] (0x0100): Sent result [17][DOMAIN.COM] = <o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [sdap_process_result] (0x2000): Trace: = sh[0x7fe30deef090], connected[1], ops[(nil)], ldap[0x7fe30def2920] = <o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [sdap_process_result] (0x2000): Trace: = ldap_result found nothing!<o:p></o:p><o:p> </o:p> = <o:p></o:p><o:p> </o:p><o:p> </o:p><o:p> </o:p><o:p> </o:p><o:p> </o:p><o:p> </o:p><o:p> </o:p></div></body></html> ------=_NextPart_000_0050_01D18069.35C995E0--

2 5

Question about Huge Pages
by Gianluca Cecchi 21 Apr '17

21 Apr '17

Hello, I'm testing virtualization of some Oracle servers. I have 4.1.1 with CentOS 7.3 servers as hypervisors. Typically on physical Oracle servers I configure huge pages for Oracle memory areas. In particular I disable Transparent Huge Pages, because they are known to be in conflict with Oracle performances, both in RAC and in standalone configurations. In RHEL systems I configure "transparent_hugepage=never" boot parameter, while in Oracle Linux OS uek kernels it is already disabled by default. I notice that in CentOS 7.3, by default, transparent huge pages are configured: [root@ov300 ~]# cat /proc/meminfo | grep -i huge AnonHugePages: 17006592 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB [root@ov300 ~]# I'm going to configure a VM with 64Gb of ram and with an Oracle RDBMS that would have 16Gb of SGA. I suspect that I could have problems if I dont' change configuration at hypervisor level... What do you think about this subject? Is there any drawback if I manually configure the hypervisors to boot with the "transparent_hugepage=never" boot parameter? Thanks in advance, Gianluca

3 7

Re: [ovirt-users] LACP Bonding issue
by Bryan Sockel 21 Apr '17

21 Apr '17

This is a multi-part message in MIME format. ----_com.samsung.android.email_7576755804572660 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit We checked the port groups, and servers are cabled correctly. After server is rebooted, em1 is the only interface passing traffic. Other 3 nics sitting idle. We can down each port on the switch and confirm it is down on the server. I am pretty sure it is related to the bridge that was created to pass vm-host-altn traffic when the appliance was first installed. -------- Original message -------- From: Chris Adams <cma(a)cmadams.net> Date: 4/20/17 5:40 PM (GMT-06:00) To: users(a)ovirt.org Subject: Re: [ovirt-users] LACP Bonding issue _____ >From : Chris Adams [cma(a)cmadams.net] To : users(a)ovirt.org [users(a)ovirt.org] Date : Thursday, April 20 2017 17:40:25 Once upon a time, Bryan Sockel said: > It seems that is some disconnect between my network bridge, the bond and my > interfaces. I would like to some how get my bond to use all 4 interfaces. > On reboot, it always seems to reset consistently to EM1. Are you sure the switch side is all the same LACP group? Sounds like one port may accidentally be in a separate group, and that happens to be em1. You might try swapping wires between em1 and another port and reboot and see which ports come up - if all but the port with the wire formerly in em1 come up, it points to the switch config. -- Chris Adams _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users ----_com.samsung.android.email_7576755804572660 Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: quoted-printable <html><head><meta http-equiv=3D"Content-Type" content=3D"text/html; = charset=3DUTF-8"></head><body><div>We checked the port groups, and = servers are cabled correctly.</div><div> </div><div>After server is = rebooted, em1 is the only interface passing traffic. Other 3 nics = sitting idle.  We can down each port on the switch and confirm it = is down on the server.</div><div> </div><div> </div><div>I am = pretty sure it is related to the bridge that was created to pass = vm-host-altn traffic when the appliance was first installed.</div><div = id=3D"composer_signature"><div style=3D"font-size:85%;color:#575757" = dir=3D"auto"> </div></div><div> </div><div> </div><div>-------- Original message = --------</div><div>From: Chris Adams <cma(a)cmadams.net> = </div><div>Date: 4/20/17 5:40 PM (GMT-06:00) </div><div>To: = users(a)ovirt.org </div><div>Subject: Re: [ovirt-users] LACP Bonding issue = </div><div> </div><div = style=3D"margin-left:2px;padding-left:2px;border-left:1px solid = #202020;"><div style=3D"font-size: 10pt; background-color: #ffffff; = color: #000000; font-weight: 400; font-family: = Tahoma,Arial,Verdana,sans-serif;" ><hr /><div>From : Chris Adams = [cma(a)cmadams.net]</div><div>To : = users(a)ovirt.org [users(a)ovirt.org]</div><div>Date : Thursday, April 20 2017 17:40:25</div></div>=0A= <pre>Once upon a time, Bryan Sockel <Bryan.Sockel(a)altn.com> said: > It seems that is some disconnect between my network bridge, the bond = and my=20 > interfaces. I would like to some how get my bond to use all 4 = interfaces. =20 > On reboot, it always seems to reset consistently to EM1. Are you sure the switch side is all the same LACP group? Sounds like one port may accidentally be in a separate group, and that happens to be em1. You might try swapping wires between em1 and another port and reboot and see which ports come up - if all but the port with the wire formerly in em1 come up, it points to the switch config. --=20 Chris Adams <cma(a)cmadams.net> _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users </pre></div></body></html> ----_com.samsung.android.email_7576755804572660--

3 3

LACP Bonding issue
by Bryan Sockel 21 Apr '17

21 Apr '17

Hi, I discovered an issue with my LACP configuration and i am having trouble figuring it out. I am running 2 Dell Powered 610's with 4 broadcomm nics. I am trying to bond them together, however only one of the nics goes active no mater how much traffic i push across the links. I have spoken to my network admin, and says that the switch ports are configured and can only see one active link on the switch. Thanks Bryan

3 3

Communicate between the guest vm's hosted on different hosts on different data centres using OVS
by Linov Suresh 20 Apr '17

20 Apr '17

Hello, I have configured OVS network on oVirt 4.1.1, following the document https://www.ovirt.org/blog/2016/11/ovirt-provider-ovn/ I have created OVN Provider, and created new Logical Network for OVS using OVN Provider. I have synced the network also selected OVS when I created the cluster. I have two data centres and each data centre has one host each. Now I have created VM's selecting OVS network (not ovirtmgmt). VM's in the same data centre can talk to each other. How do i make the VM's hosted on different data centre can talk to each other? Appreciate your help in advance, Sincerely, Suresh.

1 0

Re: [ovirt-users] virsh list
by Luca 'remix_tj' Lorenzetto 20 Apr '17

20 Apr '17

Depends on what you need to do. If you only want to se vms, add -r to have readonly access. Luca Il 15 apr 2017 12:58 AM, "Konstantin Raskoshnyi" <konrasko(a)gmail.com> ha scritto: Hi guys I'm trying to run virsh list (or any other virsh commands) virsh list Please enter your authentication name: admin Please enter your password: error: failed to connect to the hypervisor error: authentication failed: authentication failed But I have no clue about login:password ovirt uses. I tried admin password, also tried to create new account with saslpasswd2 Which didn't work to. Any solutions? _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users

2 1

Hosted engine install failed; vdsm upset about broker (revised)
by Jamie Lawrence 20 Apr '17

20 Apr '17

So, tracing this further, I’m pretty sure this is something about sanlock. As best I can tell this[1] seems to be the failure that is blocking importing the pool, creating storage domains, importing the HE, etc. Contrary to the log, sanlock is running; I verified it starts on system-boot and restarts just fine. I found one reference to someone having a similar problem in 3.6, but that appeared to have been a permission issue I’m not afflicted with. How can I move past this? TIA, -j [1] agent.log: MainThread::WARNING::2017-04-19 17:07:13,537::agent::209::ovirt_hosted_engine_ha.agent.agent.Agent::(_run_agent) Restarting agent, attempt '6' MainThread::INFO::2017-04-19 17:07:13,567::hosted_engine::242::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_get_hostname) Found certificate common name: sc5-ovirt-2.squaretrade.com MainThread::INFO::2017-04-19 17:07:13,569::hosted_engine::604::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) Initializing VDSM MainThread::INFO::2017-04-19 17:07:16,044::hosted_engine::630::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Connecting the storage MainThread::INFO::2017-04-19 17:07:16,045::storage_server::219::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server MainThread::INFO::2017-04-19 17:07:20,876::storage_server::226::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server MainThread::INFO::2017-04-19 17:07:20,893::storage_server::233::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Refreshing the storage domain MainThread::INFO::2017-04-19 17:07:21,160::hosted_engine::657::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Preparing images MainThread::INFO::2017-04-19 17:07:21,160::image::126::ovirt_hosted_engine_ha.lib.image.Image::(prepare_images) Preparing images MainThread::INFO::2017-04-19 17:07:23,954::hosted_engine::660::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Refreshing vm.conf MainThread::INFO::2017-04-19 17:07:23,955::config::485::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_vm_conf) Reloading vm.conf from the shared storage domain MainThread::INFO::2017-04-19 17:07:23,955::config::412::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(_get_vm_conf_content_from_ovf_store) Trying to get a fresher copy of vm configuration from the OVF_STORE MainThread::WARNING::2017-04-19 17:07:26,741::ovf_store::107::ovirt_hosted_engine_ha.lib.ovf.ovf_store.OVFStore::(scan) Unable to find OVF_STORE MainThread::ERROR::2017-04-19 17:07:26,744::config::450::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(_get_vm_conf_content_from_ovf_store) Unable to identify the OVF_STORE volume, falling back to initial vm.conf. Please ensure you already added your first data domain for regular VMs MainThread::INFO::2017-04-19 17:07:26,770::hosted_engine::509::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_broker) Initializing ha-broker connection MainThread::INFO::2017-04-19 17:07:26,771::brokerlink::130::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(start_monitor) Starting monitor ping, options {'addr': '10.181.26.1'} MainThread::INFO::2017-04-19 17:07:26,774::brokerlink::141::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(start_monitor) Success, id 140621269798096 MainThread::INFO::2017-04-19 17:07:26,774::brokerlink::130::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(start_monitor) Starting monitor mgmt-bridge, options {'use_ssl': 'true', 'bridge_name': 'ovirtmgmt', 'address': '0'} MainThread::INFO::2017-04-19 17:07:26,791::brokerlink::141::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(start_monitor) Success, id 140621269798544 MainThread::INFO::2017-04-19 17:07:26,792::brokerlink::130::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(start_monitor) Starting monitor mem-free, options {'use_ssl': 'true', 'address': '0'} MainThread::INFO::2017-04-19 17:07:26,793::brokerlink::141::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(start_monitor) Success, id 140621269798224 MainThread::INFO::2017-04-19 17:07:26,794::brokerlink::130::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(start_monitor) Starting monitor cpu-load-no-engine, options {'use_ssl': 'true', 'vm_uuid': '04ff4cf1-135a-4918-9a1f-8023322f89a3', 'address': '0'} MainThread::INFO::2017-04-19 17:07:26,796::brokerlink::141::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(start_monitor) Success, id 140621269796816 MainThread::INFO::2017-04-19 17:07:26,796::brokerlink::130::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(start_monitor) Starting monitor engine-health, options {'use_ssl': 'true', 'vm_uuid': '04ff4cf1-135a-4918-9a1f-8023322f89a3', 'address': '0'} MainThread::INFO::2017-04-19 17:07:26,798::brokerlink::141::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(start_monitor) Success, id 140621269797840 MainThread::INFO::2017-04-19 17:07:31,513::brokerlink::179::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(set_storage_domain) Success, id 140621269798480 MainThread::INFO::2017-04-19 17:07:31,513::hosted_engine::601::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_broker) Broker initialized, all submonitors started MainThread::ERROR::2017-04-19 17:07:31,556::agent::196::ovirt_hosted_engine_ha.agent.agent.Agent::(_run_agent) Service sanlock is not running and the admin is responsible for starting it. Waiting... MainThread::WARNING::2017-04-19 17:07:36,562::agent::209::ovirt_hosted_engine_ha.agent.agent.Agent::(_run_agent) Restarting agent, attempt '7' MainThread::INFO::2017-04-19 17:07:36,592::hosted_engine::242::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_get_hostname) Found certificate common name: sc5-ovirt-2.squaretrade.com - - - prior message below - - - I trialed installing the hosted engine, following the instructions at http://www.ovirt.org/documentation/self-hosted/chap-Deploying_Self-Hosted_E… . This is using Gluster as the backend storage subsystem. Answer file at the end. Per the docs, "When the hosted-engine deployment script completes successfully, the oVirt Engine is configured and running on your host. The Engine has already configured the data center, cluster, host, the Engine virtual machine, and a shared storage domain dedicated to the Engine virtual machine.” In my case, this is false. The installation claims success, but the hosted engine VM stays stopped, unless I start it manually. If I start it manually, the default DC is down, the default cluster has the installation host in the cluster, there is no storage, and the VM doesn’t show up in the GUI. In this install run, I have not yet started the engine manually. I assume this is related to the errors in ovirt-hosted-engine-setup.log, below. (The timestamps are confusing; it looks like the Python errors are logged some time after they’re captured or something.) The HA broker and agent logs just show them looping in the sequence below. Is there a decent way to pick this up and continue? If not, how do I make this work? Thanks, -j - - - - ovirt-hosted-engine-setup.log snippet: - - - - 2017-04-19 12:29:55 DEBUG otopi.context context._executeMethod:128 Stage late_setup METHOD otopi.plugins.gr_he_setup.system.vdsmenv.Plugin._late_setup 2017-04-19 12:29:55 DEBUG otopi.plugins.otopi.services.systemd systemd.status:90 check service vdsmd status 2017-04-19 12:29:55 DEBUG otopi.plugins.otopi.services.systemd plugin.executeRaw:813 execute: ('/bin/systemctl', 'status', 'vdsmd.service'), executable='None', cwd='None', env=None 2017-04-19 12:29:55 DEBUG otopi.plugins.otopi.services.systemd plugin.executeRaw:863 execute-result: ('/bin/systemctl', 'status', 'vdsmd.service'), rc=0 2017-04-19 12:29:55 DEBUG otopi.plugins.otopi.services.systemd plugin.execute:921 execute-output: ('/bin/systemctl', 'status', 'vdsmd.service') stdout: ● vdsmd.service - Virtual Desktop Server Manager Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled; vendor preset: enabled) Active: active (running) since Wed 2017-04-19 12:26:59 PDT; 2min 55s ago Process: 67370 ExecStopPost=/usr/libexec/vdsm/vdsmd_init_common.sh --post-stop (code=exited, status=0/SUCCESS) Process: 69995 ExecStartPre=/usr/libexec/vdsm/vdsmd_init_common.sh --pre-start (code=exited, status=0/SUCCESS) Main PID: 70062 (vdsm) CGroup: /system.slice/vdsmd.service └─70062 /usr/bin/python2 /usr/share/vdsm/vdsm Apr 19 12:29:00 sc5-ovirt-2.squaretrade.com vdsm[70062]: vdsm ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink ERROR Failed to connect to broker, the number of errors has exceeded the limit (1) Apr 19 12:29:00 sc5-ovirt-2.squaretrade.com vdsm[70062]: vdsm root ERROR failed to retrieve Hosted Engine HA info Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/host/api.py", line 231, in _getHaInfo stats = instance.get_all_stats() File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py", line 102, in get_all_stats with broker.connection(self._retries, self._wait): File "/usr/lib64/python2.7/contextlib.py", line 17, in __enter__ return self.gen.next() File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py", line 99, in connection self.connect(retries, wait) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py", line 78, in connect raise BrokerConnectionError(error_msg) BrokerConnectionError: Failed to connect to broker, the number of errors has exceeded the limit (1) Apr 19 12:29:15 sc5-ovirt-2.squaretrade.com vdsm[70062]: vdsm ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink ERROR Failed to connect to broker, the number of errors has exceeded the limit (1) Apr 19 12:29:15 sc5-ovirt-2.squaretrade.com vdsm[70062]: vdsm root ERROR failed to retrieve Hosted Engine HA info Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/host/api.py", line 231, in _getHaInfo stats = instance.get_all_stats() File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py", line 102, in get_all_stats with broker.connection(self._retries, self._wait): File "/usr/lib64/python2.7/contextlib.py", line 17, in __enter__ return self.gen.next() File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py", line 99, in connection self.connect(retries, wait) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py", line 78, in connect raise BrokerConnectionError(error_msg) BrokerConnectionError: Failed to connect to broker, the number of errors has exceeded the limit (1) Apr 19 12:29:20 sc5-ovirt-2.squaretrade.com vdsm[70062]: vdsm root WARN File: /var/lib/libvirt/qemu/channels/04ff4cf1-135a-4918-9a1f-8023322f89a3.com.redhat.rhevm.vdsm already removed Apr 19 12:29:20 sc5-ovirt-2.squaretrade.com vdsm[70062]: vdsm root WARN File: /var/lib/libvirt/qemu/channels/04ff4cf1-135a-4918-9a1f-8023322f89a3.org.qemu.guest_agent.0 already removed Apr 19 12:29:30 sc5-ovirt-2.squaretrade.com vdsm[70062]: vdsm ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink ERROR Failed to connect to broker, the number of errors has exceeded the limit (1) Apr 19 12:29:30 sc5-ovirt-2.squaretrade.com vdsm[70062]: vdsm root ERROR failed to retrieve Hosted Engine HA info Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/host/api.py", line 231, in _getHaInfo stats = instance.get_all_stats() File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py", line 102, in get_all_stats with broker.connection(self._retries, self._wait): File "/usr/lib64/python2.7/contextlib.py", line 17, in __enter__ return self.gen.next() File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py", line 99, in connection self.connect(retries, wait) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py", line 78, in connect raise BrokerConnectionError(error_msg) BrokerConnectionError: Failed to connect to broker, the number of errors has exceeded the limit (1) Apr 19 12:29:45 sc5-ovirt-2.squaretrade.com vdsm[70062]: vdsm ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink ERROR Failed to connect to broker, the number of errors has exceeded the limit (1) Apr 19 12:29:45 sc5-ovirt-2.squaretrade.com vdsm[70062]: vdsm root ERROR failed to retrieve Hosted Engine HA info Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/host/api.py", line 231, in _getHaInfo stats = instance.get_all_stats() File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py", line 102, in get_all_stats with broker.connection(self._retries, self._wait): File "/usr/lib64/python2.7/contextlib.py", line 17, in __enter__ return self.gen.next() File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py", line 99, in connection self.connect(retries, wait) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py", line 78, in connect raise BrokerConnectionError(error_msg) BrokerConnectionError: Failed to connect to broker, the number of errors has exceeded the limit (1) 2017-04-19 12:29:55 DEBUG otopi.plugins.otopi.services.systemd plugin.execute:926 execute-output: ('/bin/systemctl', 'status', 'vdsmd.service') stderr: 2017-04-19 12:29:57 DEBUG otopi.plugins.gr_he_setup.system.vdsmenv util.connect_vdsm_json_rpc:209 {'status': {'message': 'Done', 'code': 0}, u'systemProductName': u'PowerEdge R630', u'systemSerialNumber': u'GTH5942', u'systemFamily': u'PowerEdge', u'systemUUID': u'4C4C4544-0054-4810-8035-C7C04F393432', u'systemManufacturer': u'Dell Inc.'} 2017-04-19 12:29:57 DEBUG otopi.context context.dumpEnvironment:760 ENVIRONMENT DUMP - BEGIN 2017-04-19 12:29:57 DEBUG otopi.context context.dumpEnvironment:770 ENV OVEHOSTED_VDSM/vdscli=_Server:'<vdsm.jsonrpcvdscli._Server object at 0x34a8290>' 2017-04-19 12:29:57 DEBUG otopi.context context.dumpEnvironment:774 ENVIRONMENT DUMP - END 2017-04-19 12:29:57 DEBUG otopi.context context._executeMethod:128 Stage late_setup METHOD otopi.plugins.gr_he_common.vm.misc.Plugin._late_setup 2017-04-19 12:29:57 DEBUG otopi.context context._executeMethod:134 condition False 2017-04-19 12:29:57 DEBUG otopi.context context._executeMethod:128 Stage late_setup METHOD otopi.plugins.gr_he_setup.pki.vdsmpki.Plugin._late_setup 2017-04-19 12:29:57 DEBUG otopi.plugins.gr_he_setup.pki.vdsmpki plugin.executeRaw:813 execute: ('/bin/openssl', 'x509', '-noout', '-text', '-in', '/etc/pki/vdsm/libvirt-spice/server-cert.pem'), executable='None', cwd='None', env=None 2017-04-19 12:29:57 DEBUG otopi.plugins.gr_he_setup.pki.vdsmpki plugin.executeRaw:863 execute-result: ('/bin/openssl', 'x509', '-noout', '-text', '-in', '/etc/pki/vdsm/libvirt-spice/server-cert.pem'), rc=0 2017-04-19 12:29:57 DEBUG otopi.plugins.gr_he_setup.pki.vdsmpki plugin.execute:921 execute-output: ('/bin/openssl', 'x509', '-noout', '-text', '-in', '/etc/pki/vdsm/libvirt-spice/server-cert.pem') stdout: - - - - broker.log: - - - - Thread-2970::INFO::2017-04-19 14:29:51,591::cpu_load_no_engine::113::cpu_load_no_engine.EngineHealth::(calculate_load) System load total=0.0117, engine=0.0000, non-engine=0.0117 Thread-2976::INFO::2017-04-19 14:29:56,347::listener::134::ovirt_hosted_engine_ha.broker.listener.ConnectionHandler::(setup) Connection established Thread-2976::INFO::2017-04-19 14:29:56,361::listener::186::ovirt_hosted_engine_ha.broker.listener.ConnectionHandler::(handle) Connection closed Thread-2977::INFO::2017-04-19 14:29:57,628::listener::134::ovirt_hosted_engine_ha.broker.listener.ConnectionHandler::(setup) Connection established Thread-2977::INFO::2017-04-19 14:29:57,629::monitor::66::ovirt_hosted_engine_ha.broker.monitor.Monitor::(start_submonitor) Starting submonitor ping Thread-2977::INFO::2017-04-19 14:29:57,631::monitor::79::ovirt_hosted_engine_ha.broker.monitor.Monitor::(start_submonitor) Started submonitor ping, id 140603614328464 Thread-2977::INFO::2017-04-19 14:29:57,662::monitor::66::ovirt_hosted_engine_ha.broker.monitor.Monitor::(start_submonitor) Starting submonitor mgmt-bridge Thread-2977::INFO::2017-04-19 14:29:57,667::monitor::79::ovirt_hosted_engine_ha.broker.monitor.Monitor::(start_submonitor) Started submonitor mgmt-bridge, id 140603614326992 Thread-2977::INFO::2017-04-19 14:29:57,688::monitor::66::ovirt_hosted_engine_ha.broker.monitor.Monitor::(start_submonitor) Starting submonitor mem-free Thread-2977::INFO::2017-04-19 14:29:57,735::monitor::79::ovirt_hosted_engine_ha.broker.monitor.Monitor::(start_submonitor) Started submonitor mem-free, id 140604548742096 Thread-2977::INFO::2017-04-19 14:29:57,756::monitor::66::ovirt_hosted_engine_ha.broker.monitor.Monitor::(start_submonitor) Starting submonitor cpu-load-no-engine Thread-2977::INFO::2017-04-19 14:29:57,798::monitor::79::ovirt_hosted_engine_ha.broker.monitor.Monitor::(start_submonitor) Started submonitor cpu-load-no-engine, id 43463568 Thread-2977::INFO::2017-04-19 14:29:57,841::monitor::66::ovirt_hosted_engine_ha.broker.monitor.Monitor::(start_submonitor) Starting submonitor engine-health Thread-2977::INFO::2017-04-19 14:29:57,863::monitor::79::ovirt_hosted_engine_ha.broker.monitor.Monitor::(start_submonitor) Started submonitor engine-health, id 140604881915728 Thread-2983::INFO::2017-04-19 14:29:58,153::listener::134::ovirt_hosted_engine_ha.broker.listener.ConnectionHandler::(setup) Connection established Thread-2984::INFO::2017-04-19 14:30:02,179::listener::134::ovirt_hosted_engine_ha.broker.listener.ConnectionHandler::(setup) Connection established Thread-2977::INFO::2017-04-19 14:30:02,249::storage_backends::119::ovirt_hosted_engine_ha.lib.storage_backends::(_check_symlinks) Cleaning up stale LV link '/rhev/data-center/mnt/glusterSD/sc5-gluster-1:_ovirt__engine/a81b229c-2422-4110-af45-1bc4d9a01bab/ha_agent/hosted-engine.lockspace' Thread-2977::INFO::2017-04-19 14:30:02,321::storage_backends::119::ovirt_hosted_engine_ha.lib.storage_backends::(_check_symlinks) Cleaning up stale LV link '/rhev/data-center/mnt/glusterSD/sc5-gluster-1:_ovirt__engine/a81b229c-2422-4110-af45-1bc4d9a01bab/ha_agent/hosted-engine.metadata' Thread-2983::INFO::2017-04-19 14:30:02,334::listener::186::ovirt_hosted_engine_ha.broker.listener.ConnectionHandler::(handle) Connection closed Thread-2984::INFO::2017-04-19 14:30:02,340::listener::186::ovirt_hosted_engine_ha.broker.listener.ConnectionHandler::(handle) Connection closed Thread-2969::INFO::2017-04-19 14:30:02,343::mem_free::50::mem_free.MemFree::(action) memFree: 254533 Thread-2980::INFO::2017-04-19 14:30:02,382::mem_free::50::mem_free.MemFree::(action) memFree: 254530 Thread-2985::INFO::2017-04-19 14:30:07,991::listener::134::ovirt_hosted_engine_ha.broker.listener.ConnectionHandler::(setup) Connection established Thread-2985::INFO::2017-04-19 14:30:08,082::listener::186::ovirt_hosted_engine_ha.broker.listener.ConnectionHandler::(handle) Connection closed Thread-2969::INFO::2017-04-19 14:30:08,129::mem_free::50::mem_free.MemFree::(action) memFree: 254534 Thread-2966::INFO::2017-04-19 14:30:09,719::listener::186::ovirt_hosted_engine_ha.broker.listener.ConnectionHandler::(handle) Connection closed Thread-2966::INFO::2017-04-19 14:30:09,720::monitor::90::ovirt_hosted_engine_ha.broker.monitor.Monitor::(stop_submonitor) Stopping submonitor ping, id 140603546975120 Thread-2966::INFO::2017-04-19 14:30:09,720::monitor::99::ovirt_hosted_engine_ha.broker.monitor.Monitor::(stop_submonitor) Stopped submonitor ping, id 140603546975120 Thread-2966::INFO::2017-04-19 14:30:09,720::monitor::90::ovirt_hosted_engine_ha.broker.monitor.Monitor::(stop_submonitor) Stopping submonitor mgmt-bridge, id 140603546973136 Thread-2966::INFO::2017-04-19 14:30:09,720::monitor::99::ovirt_hosted_engine_ha.broker.monitor.Monitor::(stop_submonitor) Stopped submonitor mgmt-bridge, id 140603546973136 Thread-2966::INFO::2017-04-19 14:30:09,721::monitor::90::ovirt_hosted_engine_ha.broker.monitor.Monitor::(stop_submonitor) Stopping submonitor mem-free, id 140603546973264 Thread-2966::INFO::2017-04-19 14:30:09,721::monitor::99::ovirt_hosted_engine_ha.broker.monitor.Monitor::(stop_submonitor) Stopped submonitor mem-free, id 140603546973264 Thread-2966::INFO::2017-04-19 14:30:09,721::monitor::90::ovirt_hosted_engine_ha.broker.monitor.Monitor::(stop_submonitor) Stopping submonitor cpu-load-no-engine, id 140603546976144 Thread-2966::INFO::2017-04-19 14:30:09,721::monitor::99::ovirt_hosted_engine_ha.broker.monitor.Monitor::(stop_submonitor) Stopped submonitor cpu-load-no-engine, id 140603546976144 Thread-2966::INFO::2017-04-19 14:30:09,721::monitor::90::ovirt_hosted_engine_ha.broker.monitor.Monitor::(stop_submonitor) Stopping submonitor engine-health, id 140603546974096 Thread-2966::INFO::2017-04-19 14:30:09,721::monitor::99::ovirt_hosted_engine_ha.broker.monitor.Monitor::(stop_submonitor) Stopped submonitor engine-health, id 140603546974096 Thread-2979::INFO::2017-04-19 14:30:11,145::mgmt_bridge::55::mgmt_bridge.MgmtBridge::(action) Found bridge ovirtmgmt with ports Thread-2986::INFO::2017-04-19 14:30:11,462::listener::134::ovirt_hosted_engine_ha.broker.listener.ConnectionHandler::(setup) Connection established Thread-2986::INFO::2017-04-19 14:30:11,480::listener::186::ovirt_hosted_engine_ha.broker.listener.ConnectionHandler::(handle) Connection closed Thread-2987::INFO::2017-04-19 14:30:11,481::listener::134::ovirt_hosted_engine_ha.broker.listener.ConnectionHandler::(setup) Connection established Thread-2987::INFO::2017-04-19 14:30:11,488::listener::186::ovirt_hosted_engine_ha.broker.listener.ConnectionHandler::(handle) Connection closed Thread-2980::INFO::2017-04-19 14:30:11,502::mem_free::50::mem_free.MemFree::(action) memFree: 254535 - - - - ha agent.log: - - - - MainThread::WARNING::2017-04-19 14:31:16,352::agent::209::ovirt_hosted_engine_ha.agent.agent.Agent::(_run_agent) Restarting agent, attempt '6' MainThread::INFO::2017-04-19 14:31:16,383::hosted_engine::242::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_get_hostname) Found certificate common name: sc5-ovirt-2.squaretrade.com MainThread::INFO::2017-04-19 14:31:16,385::hosted_engine::604::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) Initializing VDSM MainThread::INFO::2017-04-19 14:31:18,863::hosted_engine::630::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Connecting the storage MainThread::INFO::2017-04-19 14:31:18,864::storage_server::219::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server MainThread::INFO::2017-04-19 14:31:23,672::storage_server::226::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server MainThread::INFO::2017-04-19 14:31:23,689::storage_server::233::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Refreshing the storage domain MainThread::INFO::2017-04-19 14:31:23,956::hosted_engine::657::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Preparing images MainThread::INFO::2017-04-19 14:31:23,957::image::126::ovirt_hosted_engine_ha.lib.image.Image::(prepare_images) Preparing images MainThread::INFO::2017-04-19 14:31:26,768::hosted_engine::660::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Refreshing vm.conf MainThread::INFO::2017-04-19 14:31:26,769::config::485::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_vm_conf) Reloading vm.conf from the shared storage domain MainThread::INFO::2017-04-19 14:31:26,769::config::412::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(_get_vm_conf_content_from_ovf_store) Trying to get a fresher copy of vm configuration from the OVF_STORE MainThread::WARNING::2017-04-19 14:31:29,548::ovf_store::107::ovirt_hosted_engine_ha.lib.ovf.ovf_store.OVFStore::(scan) Unable to find OVF_STORE MainThread::ERROR::2017-04-19 14:31:29,551::config::450::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(_get_vm_conf_content_from_ovf_store) Unable to identify the OVF_STORE volume, falling back to initial vm.conf. Please ensure you already added your first data domain for regular VMs MainThread::INFO::2017-04-19 14:31:29,576::hosted_engine::509::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_broker) Initializing ha-broker connection MainThread::INFO::2017-04-19 14:31:29,577::brokerlink::130::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(start_monitor) Starting monitor ping, options {'addr': '10.181.26.1'} MainThread::INFO::2017-04-19 14:31:29,596::brokerlink::141::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(start_monitor) Success, id 140604881712208 MainThread::INFO::2017-04-19 14:31:29,596::brokerlink::130::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(start_monitor) Starting monitor mgmt-bridge, options {'use_ssl': 'true', 'bridge_name': 'ovirtmgmt', 'address': '0'} MainThread::INFO::2017-04-19 14:31:29,600::brokerlink::141::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(start_monitor) Success, id 140604881712016 MainThread::INFO::2017-04-19 14:31:29,600::brokerlink::130::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(start_monitor) Starting monitor mem-free, options {'use_ssl': 'true', 'address': '0'} MainThread::INFO::2017-04-19 14:31:29,602::brokerlink::141::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(start_monitor) Success, id 140604881711568 MainThread::INFO::2017-04-19 14:31:29,602::brokerlink::130::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(start_monitor) Starting monitor cpu-load-no-engine, options {'use_ssl': 'true', 'vm_uuid': '04ff4cf1-135a-4918-9a1f-8023322f89a3', 'address': '0'} MainThread::INFO::2017-04-19 14:31:29,605::brokerlink::141::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(start_monitor) Success, id 140604881711312 MainThread::INFO::2017-04-19 14:31:29,605::brokerlink::130::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(start_monitor) Starting monitor engine-health, options {'use_ssl': 'true', 'vm_uuid': '04ff4cf1-135a-4918-9a1f-8023322f89a3', 'address': '0'} MainThread::INFO::2017-04-19 14:31:29,608::brokerlink::141::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(start_monitor) Success, id 140604881714896 MainThread::INFO::2017-04-19 14:31:34,326::brokerlink::179::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(set_storage_domain) Success, id 140604881713168 MainThread::INFO::2017-04-19 14:31:34,327::hosted_engine::601::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_broker) Broker initialized, all submonitors started MainThread::ERROR::2017-04-19 14:31:34,372::agent::196::ovirt_hosted_engine_ha.agent.agent.Agent::(_run_agent) Service sanlock is not running and the admin is responsible for starting it. Waiting… - - - - answers.conf - - - - [environment:default] OVEHOSTED_CORE/rollbackProceed=none:None OVEHOSTED_CORE/screenProceed=none:None OVEHOSTED_CORE/deployProceed=bool:True OVEHOSTED_CORE/upgradeProceed=none:None OVEHOSTED_CORE/confirmSettings=bool:True OVEHOSTED_NETWORK/fqdn=str:sc5-ovirt-engine-1.squaretrade.com OVEHOSTED_NETWORK/bridgeName=str:ovirtmgmt OVEHOSTED_NETWORK/firewallManager=none:None OVEHOSTED_NETWORK/gateway=str:10.181.26.1 OVEHOSTED_ENGINE/insecureSSL=none:None OVEHOSTED_ENGINE/clusterName=str:Default OVEHOSTED_STORAGE/storageDatacenterName=str:hosted_datacenter OVEHOSTED_STORAGE/domainType=str:glusterfs OVEHOSTED_STORAGE/connectionUUID=str:c2dd62cb-79aa-4547-b191-b74e55fe5311 OVEHOSTED_STORAGE/LunID=none:None OVEHOSTED_STORAGE/imgSizeGB=str:50 OVEHOSTED_STORAGE/mntOptions=none:None OVEHOSTED_STORAGE/iSCSIPortalIPAddress=none:None OVEHOSTED_STORAGE/metadataVolumeUUID=str:ac9d7fbf-fb41-4b96-8940-b95698e58b18 OVEHOSTED_STORAGE/sdUUID=str:a81b229c-2422-4110-af45-1bc4d9a01bab OVEHOSTED_STORAGE/iSCSITargetName=none:None OVEHOSTED_STORAGE/metadataImageUUID=str:298fef26-3039-4c9e-bee8-39770fb2e821 OVEHOSTED_STORAGE/lockspaceVolumeUUID=str:c90a1959-369d-4109-8a6e-5c81f735e43b OVEHOSTED_STORAGE/iSCSIPortalPort=none:None OVEHOSTED_STORAGE/imgUUID=str:284c61f2-a901-46f0-a05a-2e5bf220efc6 OVEHOSTED_STORAGE/confImageUUID=str:8bcc7fae-2fbc-40aa-b75a-6c6adb8ba7dc OVEHOSTED_STORAGE/spUUID=str:00000000-0000-0000-0000-000000000000 OVEHOSTED_STORAGE/lockspaceImageUUID=str:0ce0f2f9-b9ea-45b3-b091-d4f0e46e150f OVEHOSTED_ENGINE/enableHcGlusterService=bool:False OVEHOSTED_STORAGE/storageDomainName=str:hosted_storage OVEHOSTED_STORAGE/iSCSIPortal=none:None OVEHOSTED_STORAGE/volUUID=str:16304df2-2d95-4d75-932d-21d7c6de000d OVEHOSTED_STORAGE/vgUUID=none:None OVEHOSTED_STORAGE/confVolUUID=str:3b42f578-5d38-4820-b977-fa37b49926f7 OVEHOSTED_STORAGE/storageDomainConnection=str:sc5-gluster-1:/ovirt_engine OVEHOSTED_STORAGE/iSCSIPortalUser=none:None OVEHOSTED_VDSM/consoleType=str:qxl OVEHOSTED_VM/vmMemSizeMB=int:16384 OVEHOSTED_VM/vmUUID=str:04ff4cf1-135a-4918-9a1f-8023322f89a3 OVEHOSTED_VM/vmMACAddr=str:00:16:3e:6e:86:b2 OVEHOSTED_VM/emulatedMachine=str:pc OVEHOSTED_VM/consoleUUID=str:7d26f23e-59b6-4378-a0a4-f50e9653ac78 OVEHOSTED_VM/vmVCpus=str:4 OVEHOSTED_VM/nicUUID=str:a2b7dc56-02f6-4585-bd50-079b17aafe1f OVEHOSTED_VM/cdromUUID=str:cde48946-a7dc-41a5-87ee-854eb4d4dc22 OVEHOSTED_VM/ovfArchive=str:/usr/share/ovirt-engine-appliance/ovirt-engine-appliance-4.1-20170406.1.el7.centos.ova OVEHOSTED_VM/vmCDRom=none:None OVEHOSTED_VM/automateVMShutdown=bool:True OVEHOSTED_VM/cloudInitISO=str:generate OVEHOSTED_VM/cloudinitInstanceDomainName=str:squaretrade.com OVEHOSTED_VM/cloudinitInstanceHostName=str:sc5-ovirt-engine-1.squaretrade.c… OVEHOSTED_VM/rootSshPubkey=str:ssh-rsa [snip] OVEHOSTED_VM/cloudinitExecuteEngineSetup=bool:True OVEHOSTED_VM/cloudinitVMStaticCIDR=[snip] OVEHOSTED_VM/cloudinitVMTZ=str:America/Los_Angeles OVEHOSTED_VM/rootSshAccess=str:yes OVEHOSTED_VM/cloudinitVMETCHOSTS=bool:False OVEHOSTED_VM/cloudinitVMDNS=[snip] OVEHOSTED_VDSM/spicePkiSubject=str:O=squaretrade.com, CN=sc5-ovirt-2.squaretrade.com OVEHOSTED_VDSM/pkiSubject=str:/C=EN/L=Test/O=Test/CN=Test OVEHOSTED_VDSM/caSubject=str:/C=EN/L=Test/O=Test/CN=TestCA OVEHOSTED_VDSM/cpu=str:model_Haswell-noTSX OVEHOSTED_NOTIF/smtpPort=str:25 OVEHOSTED_NOTIF/smtpServer=[snip] OVEHOSTED_NOTIF/sourceEmail=[snip] OVEHOSTED_NOTIF/destEmail=[snip]

2 2

[oVirt 4.1] oVirt installation and hotplug memory to the hosted-engine VM
by wodel youchi 20 Apr '17

20 Apr '17

Hi, I am testing oVirt 4.1 using oVirt node and oVirt appliance, I have two questions : 1 - Installation process : I found that the installation process has changed regarding the appliance use, it forces the download of the appliance before continuing the installation, but it still offer the use of another image later on, which is somehow disturbing. can the force-download be disabled, When installing the first time, I did download the rpm appliance before starting the hosted-engine deployment, but I had to re-install the nodes, and since I have a poor internet connection and to save time I saved the ova file of the appliance, but I couldn't use later, because the deployment script forces me to download the image again. 2 - Can we hotplug memory on the hosted-engine VM? if yes how? I can edit the VM, but the changes are not taken into account. I then stopped the VM engine and started it again, still the changes are not taken into account, in the webui I have the new value, but free -m shows me the old one. Thanks in advance and thank you all for your work and efforts Regards.

3 2