On January 26th 2022 the oVirt project released an async update to the
following packages:
- ovirt-engine 4.4.10.6
Fixing the following bugs:
- [BZ 2044277 <https://bugzilla.redhat.com/show_bug.cgi?id=2044277>] -
Replace ovirt-engine-extension-logger-log4j with internal ovirt-engine
implementation
Package ovirt-engine-extension-logger-log4j has been obsoleted and
replaced by internal ovirt-engine implementation in oVirt Engine 4.4.10.6.
During upgrade from previous oVirt versions to oVirt 4.4.10
ovirt-engine-extension-logger-log4j package is uninstalled if it was
previously installed.
If you used ovirt-engine-extension-logger-log4j in previous oVirt
versions, you will need to manually remove existing
ovirt-engine-extension-logger-log4j
configuration files and configure the new feature of sending log records
to remote syslog service according to the Administration Guide.
Also after successful upgrade to oVirt 4.4.10 you can manually uninstall
log4j12 package without breaking oVirt setup:
$ dnf remove log4j12
- [BZ 2044257 <https://bugzilla.redhat.com/show_bug.cgi?id=2044257>] - Bump
snmp4j library version to remove dependency on log4j
oVirt Engine 4.4.10.6 is requiring snmp4j >= 3.6.4, which no longer
depends on log4j library
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://www.redhat.com/>
*Red Hat respects your work life balance. Therefore there is no need to
answer this email out of your office hours.*
On January 21st 2022 the oVirt project released an async update to the
following packages:
ovirt-engine 4.4.10.5
Fixing the following bugs:
- [BZ 1854038 <https://bugzilla.redhat.com/1854038>] - Download or upload
disk (SDK) fails due to 'Timed out waiting for transfer XXX to finalize'
- [BZ 2013430 <https://bugzilla.redhat.com/2013430>] - oVirt 4.4. FIPS
install leaves UUID blank in grub after setting kernel option
- [BZ 2037216 <https://bugzilla.redhat.com/show_bug.cgi?id=2037216>] - VM
imported from configuration is stuck in WaitForLaunch once removed quickly
after power-off
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://www.redhat.com/>
*Red Hat respects your work life balance. Therefore there is no need to
answer this email out of your office hours.*
oVirt 4.4.10 is now generally available
The oVirt project is excited to announce the general availability of oVirt
4.4.10 , as of January 18th, 2022.
This release unleashes an altogether more powerful and flexible open source
virtualization solution that encompasses hundreds of individual changes and
a wide range of enhancements across the engine, storage, network, user
interface, and analytics, as compared to oVirt 4.3.
Important notes before you install / upgrade
Please note that oVirt 4.4 only supports clusters and data centers with
compatibility version 4.2 and above. If clusters or data centers are
running with an older compatibility version, you need to upgrade them to at
least 4.2 (4.3 is recommended).
Please note that in RHEL 8 / CentOS 8 several devices that worked on EL7
are no longer supported.
For example, the megaraid_sas driver is removed. If you use Enterprise
Linux 8 hosts you can try to provide the necessary drivers for the
deprecated hardware using the DUD method (See the users’ mailing list
thread on this at
https://lists.ovirt.org/archives/list/users@ovirt.org/thread/NDSVUZSESOXEFJ…
)
Documentation
-
If you want to try oVirt as quickly as possible, follow the instructions
on the Download <https://ovirt.org/download/> page.
-
For complete installation, administration, and usage instructions, see
the oVirt Documentation <https://ovirt.org/documentation/>.
-
For upgrading from a previous version, see the oVirt Upgrade Guide
<https://ovirt.org/documentation/upgrade_guide/>.
-
For a general overview of oVirt, see About oVirt
<https://ovirt.org/community/about.html>.
What’s new in oVirt 4.4.10 Release?
This update is the ninth in a series of stabilization updates to the 4.4
series.
This release is available now on x86_64 architecture for:
-
Red Hat Enterprise Linux 8.5 (or similar)
-
CentOS Stream 8
This release supports Hypervisor Hosts on x86_64 and ppc64le architectures
for:
-
Red Hat Enterprise Linux 8.5 (or similar)
-
oVirt Node NG (based on CentOS Stream 8)
-
CentOS Stream 8
Some of the RFEs with high user impact are listed below:
-
Bug 2012135 <https://bugzilla.redhat.com/show_bug.cgi?id=2012135> -
[RFE] Provide option to unmap multiple LUNs using ovirt_remove_stale_lun
ansible role
Some of the Bugs with high user impact are listed below:
-
Bug 1710323 <https://bugzilla.redhat.com/show_bug.cgi?id=1710323> -
Microsoft failover cluster is not working with FC direct LUN on Windows
2016 server and Windows 2019
-
Bug 2023224 <https://bugzilla.redhat.com/show_bug.cgi?id=2023224> -
multipath -f fails with "map in use" error while removing the LUNs using
"ovirt_remove_stale_lun"
-
Bug 2027260 <https://bugzilla.redhat.com/show_bug.cgi?id=2027260> - Cold
backup fail in various ways - backup is reported ready before add_bitmap
jobs complete
-
Bug 1897114 <https://bugzilla.redhat.com/show_bug.cgi?id=1897114> - Add
additional logging information to be able to understand why host is stuck
in Unassigned state
-
Bug 1978655 <https://bugzilla.redhat.com/show_bug.cgi?id=1978655> - ELK
integration fails due to missing configuration parameters
-
Bug 2032919 <https://bugzilla.redhat.com/show_bug.cgi?id=2032919> -
Unable to add EL 7 host into oVirt Engine in clusters 4.2/4.3
oVirt Node has been updated, including:
-
oVirt 4.4.10: https://www.ovirt.org/release/4.4.10/
-
CentOS Stream 8 latest updates
-
Full list of changes:
--- ovirt-node-ng-image-4.4.9.3.manifest-rpm 2021-12-15 15:40:13.501764699
+0100
+++ ovirt-node-ng-image-4.4.10.manifest-rpm 2022-01-19 08:09:36.668868583
+0100
@@ -2,7 +2,6 @@
-ModemManager-glib-1.18.2-1.el8.x86_64
-NetworkManager-1.36.0-0.2.el8.x86_64
-NetworkManager-config-server-1.36.0-0.2.el8.noarch
-NetworkManager-libnm-1.36.0-0.2.el8.x86_64
-NetworkManager-ovs-1.36.0-0.2.el8.x86_64
-NetworkManager-team-1.36.0-0.2.el8.x86_64
-NetworkManager-tui-1.36.0-0.2.el8.x86_64
+NetworkManager-1.36.0-0.3.el8.x86_64
+NetworkManager-config-server-1.36.0-0.3.el8.noarch
+NetworkManager-libnm-1.36.0-0.3.el8.x86_64
+NetworkManager-ovs-1.36.0-0.3.el8.x86_64
+NetworkManager-team-1.36.0-0.3.el8.x86_64
+NetworkManager-tui-1.36.0-0.3.el8.x86_64
@@ -23 +22 @@
-alsa-lib-1.2.5-4.el8.x86_64
+alsa-lib-1.2.6.1-1.el8.x86_64
@@ -29,2 +28,2 @@
-augeas-1.12.0-6.el8.x86_64
-augeas-libs-1.12.0-6.el8.x86_64
+augeas-1.12.0-7.el8.x86_64
+augeas-libs-1.12.0-7.el8.x86_64
@@ -34 +33 @@
-autofs-5.1.4-74.el8.x86_64
+autofs-5.1.4-77.el8.x86_64
@@ -44 +43 @@
-binutils-2.30-111.el8.x86_64
+binutils-2.30-112.el8.x86_64
@@ -46 +45 @@
-blivet-data-3.4.0-7.el8.noarch
+blivet-data-3.4.0-8.el8.noarch
@@ -58 +57 @@
-ceph-common-16.2.6-1.el8s.x86_64
+ceph-common-16.2.7-1.el8s.x86_64
@@ -63,6 +62,6 @@
-clevis-15-4.el8.x86_64
-clevis-dracut-15-4.el8.x86_64
-clevis-luks-15-4.el8.x86_64
-clevis-systemd-15-4.el8.x86_64
-cockpit-258-1.el8.x86_64
-cockpit-bridge-258-1.el8.x86_64
+clevis-15-6.el8.x86_64
+clevis-dracut-15-6.el8.x86_64
+clevis-luks-15-6.el8.x86_64
+clevis-systemd-15-6.el8.x86_64
+cockpit-260-1.el8.x86_64
+cockpit-bridge-260-1.el8.x86_64
@@ -70,3 +69,3 @@
-cockpit-storaged-255-1.el8.noarch
-cockpit-system-258-1.el8.noarch
-cockpit-ws-258-1.el8.x86_64
+cockpit-storaged-259-1.el8.noarch
+cockpit-system-260-1.el8.noarch
+cockpit-ws-260-1.el8.x86_64
@@ -116 +115 @@
-dmidecode-3.2-10.el8.x86_64
+dmidecode-3.3-1.el8.x86_64
@@ -193 +192 @@
-fwupd-1.5.9-1.el8_4.x86_64
+fwupd-1.7.1-1.el8.x86_64
@@ -196 +195 @@
-gdb-headless-8.2-17.el8.x86_64
+gdb-headless-8.2-18.el8.x86_64
@@ -206,4 +205,3 @@
-glibc-2.28-174.el8.x86_64
-glibc-common-2.28-174.el8.x86_64
-glibc-gconv-extra-2.28-174.el8.x86_64
-glibc-langpack-en-2.28-174.el8.x86_64
+glibc-2.28-181.el8.x86_64
+glibc-common-2.28-181.el8.x86_64
+glibc-langpack-en-2.28-181.el8.x86_64
@@ -244 +242 @@
-gssproxy-0.8.0-19.el8.x86_64
+gssproxy-0.8.0-20.el8.x86_64
@@ -253 +251 @@
-hwdata-0.314-8.10.el8.noarch
+hwdata-0.314-8.11.el8.noarch
@@ -260,4 +258,4 @@
-ipa-client-4.9.6-6.module_el8.5.0+947+fabc681e.x86_64
-ipa-client-common-4.9.6-6.module_el8.5.0+947+fabc681e.noarch
-ipa-common-4.9.6-6.module_el8.5.0+947+fabc681e.noarch
-ipa-selinux-4.9.6-6.module_el8.5.0+947+fabc681e.noarch
+ipa-client-4.9.8-2.module_el8.6.0+1054+cdb51b28.x86_64
+ipa-client-common-4.9.8-2.module_el8.6.0+1054+cdb51b28.noarch
+ipa-common-4.9.8-2.module_el8.6.0+1054+cdb51b28.noarch
+ipa-selinux-4.9.8-2.module_el8.6.0+1054+cdb51b28.noarch
@@ -275 +273 @@
-iputils-20180629-7.el8.x86_64
+iputils-20180629-8.el8.x86_64
@@ -303,6 +301,6 @@
-kernel-4.18.0-348.2.1.el8_5.x86_64
-kernel-core-4.18.0-348.2.1.el8_5.x86_64
-kernel-modules-4.18.0-348.2.1.el8_5.x86_64
-kernel-tools-4.18.0-348.2.1.el8_5.x86_64
-kernel-tools-libs-4.18.0-348.2.1.el8_5.x86_64
-kexec-tools-2.0.20-63.el8.x86_64
+kernel-4.18.0-358.el8.x86_64
+kernel-core-4.18.0-358.el8.x86_64
+kernel-modules-4.18.0-358.el8.x86_64
+kernel-tools-4.18.0-358.el8.x86_64
+kernel-tools-libs-4.18.0-358.el8.x86_64
+kexec-tools-2.0.20-67.el8.x86_64
@@ -312 +310 @@
-kmod-kvdo-6.2.5.72-81.el8.x86_64
+kmod-kvdo-6.2.6.3-82.el8.x86_64
@@ -359 +357 @@
-libcephfs2-16.2.6-1.el8s.x86_64
+libcephfs2-16.2.7-1.el8s.x86_64
@@ -381 +379 @@
-libgcc-8.5.0-6.el8.x86_64
+libgcc-8.5.0-7.el8.x86_64
@@ -393 +391 @@
-libgomp-8.5.0-6.el8.x86_64
+libgomp-8.5.0-7.el8.x86_64
@@ -401 +399 @@
-libibverbs-37.1-1.el8.x86_64
+libibverbs-37.2-1.el8.x86_64
@@ -405 +403 @@
-libipa_hbac-2.5.2-2.el8_5.1.x86_64
+libipa_hbac-2.6.1-2.el8.x86_64
@@ -418 +415,0 @@
-libmbim-1.26.0-2.el8.x86_64
@@ -434 +431 @@
-libosinfo-1.9.0-1.el8.x86_64
+libosinfo-1.9.0-2.el8.x86_64
@@ -441 +437,0 @@
-libpmemobj-1.6.1-1.el8.x86_64
@@ -447 +442,0 @@
-libqmi-1.30.2-1.el8.x86_64
@@ -449,3 +444,3 @@
-librados2-16.2.6-1.el8s.x86_64
-libradosstriper1-16.2.6-1.el8s.x86_64
-librbd1-16.2.6-1.el8s.x86_64
+librados2-16.2.7-1.el8s.x86_64
+libradosstriper1-16.2.7-1.el8s.x86_64
+librbd1-16.2.7-1.el8s.x86_64
@@ -453 +448 @@
-librdmacm-37.1-1.el8.x86_64
+librdmacm-37.2-1.el8.x86_64
@@ -463 +458 @@
-librgw2-16.2.6-1.el8s.x86_64
+librgw2-16.2.7-1.el8s.x86_64
@@ -477,7 +472,7 @@
-libsss_autofs-2.5.2-2.el8_5.1.x86_64
-libsss_certmap-2.5.2-2.el8_5.1.x86_64
-libsss_idmap-2.5.2-2.el8_5.1.x86_64
-libsss_nss_idmap-2.5.2-2.el8_5.1.x86_64
-libsss_simpleifp-2.5.2-2.el8_5.1.x86_64
-libsss_sudo-2.5.2-2.el8_5.1.x86_64
-libstdc++-8.5.0-6.el8.x86_64
+libsss_autofs-2.6.1-2.el8.x86_64
+libsss_certmap-2.6.1-2.el8.x86_64
+libsss_idmap-2.6.1-2.el8.x86_64
+libsss_nss_idmap-2.6.1-2.el8.x86_64
+libsss_simpleifp-2.6.1-2.el8.x86_64
+libsss_sudo-2.6.1-2.el8.x86_64
+libstdc++-8.5.0-7.el8.x86_64
@@ -536 +531 @@
-libwbclient-4.14.5-2.el8.x86_64
+libwbclient-4.15.3-0.el8.x86_64
@@ -570 +565 @@
-mdadm-4.2-rc2.el8.x86_64
+mdadm-4.2-rc3.el8.x86_64
@@ -598,4 +593,4 @@
-net-snmp-5.8-23.el8.x86_64
-net-snmp-agent-libs-5.8-23.el8.x86_64
-net-snmp-libs-5.8-23.el8.x86_64
-net-snmp-utils-5.8-23.el8.x86_64
+net-snmp-5.8-24.el8.x86_64
+net-snmp-agent-libs-5.8-24.el8.x86_64
+net-snmp-libs-5.8-24.el8.x86_64
+net-snmp-utils-5.8-24.el8.x86_64
@@ -609,2 +604,2 @@
-nmstate-1.2.0-0.1.alpha2.el8.x86_64
-nmstate-plugin-ovsdb-1.2.0-0.1.alpha2.el8.noarch
+nmstate-1.2.0-1.el8.x86_64
+nmstate-plugin-ovsdb-1.2.0-1.el8.noarch
@@ -640 +635 @@
-osinfo-db-20210903-1.el8.noarch
+osinfo-db-20211216-1.el8.noarch
@@ -643 +638 @@
-ovirt-ansible-collection-1.6.5-1.el8.noarch
+ovirt-ansible-collection-1.6.6-1.el8.noarch
@@ -646 +641 @@
-ovirt-hosted-engine-ha-2.4.9-1.el8.noarch
+ovirt-hosted-engine-ha-2.4.10-1.el8.noarch
@@ -651 +646 @@
-ovirt-node-ng-image-update-placeholder-4.4.9.3-1.el8.noarch
+ovirt-node-ng-image-update-placeholder-4.4.10-1.el8.noarch
@@ -659,2 +654,2 @@
-ovirt-release-host-node-4.4.9.3-1.el8.noarch
-ovirt-release44-4.4.9.3-1.el8.noarch
+ovirt-release-host-node-4.4.10-1.el8.noarch
+ovirt-release44-4.4.10-1.el8.noarch
@@ -667,3 +662,3 @@
-pacemaker-cluster-libs-2.1.2-1.el8.x86_64
-pacemaker-libs-2.1.2-1.el8.x86_64
-pacemaker-schemas-2.1.2-1.el8.noarch
+pacemaker-cluster-libs-2.1.2-2.el8.x86_64
+pacemaker-libs-2.1.2-2.el8.x86_64
+pacemaker-schemas-2.1.2-2.el8.noarch
@@ -677 +672 @@
-pcsc-lite-1.8.23-4.1.el8_4.x86_64
+pcsc-lite-1.9.5-1.el8.x86_64
@@ -679 +674 @@
-pcsc-lite-libs-1.8.23-4.1.el8_4.x86_64
+pcsc-lite-libs-1.9.5-1.el8.x86_64
@@ -747 +742 @@
-python3-blivet-3.4.0-7.el8.noarch
+python3-blivet-3.4.0-8.el8.noarch
@@ -750,3 +745,3 @@
-python3-ceph-argparse-16.2.6-1.el8s.x86_64
-python3-ceph-common-16.2.6-1.el8s.x86_64
-python3-cephfs-16.2.6-1.el8s.x86_64
+python3-ceph-argparse-16.2.7-1.el8s.x86_64
+python3-ceph-common-16.2.7-1.el8s.x86_64
+python3-cephfs-16.2.7-1.el8s.x86_64
@@ -755 +750,2 @@
-python3-cloud-what-1.28.21-3.el8.x86_64
+python3-click-6.7-8.el8.noarch
+python3-cloud-what-1.28.24-1.el8.x86_64
@@ -787,2 +783,2 @@
-python3-ipaclient-4.9.6-6.module_el8.5.0+947+fabc681e.noarch
-python3-ipalib-4.9.6-6.module_el8.5.0+947+fabc681e.noarch
+python3-ipaclient-4.9.8-2.module_el8.6.0+1054+cdb51b28.noarch
+python3-ipalib-4.9.8-2.module_el8.6.0+1054+cdb51b28.noarch
@@ -797,2 +793,2 @@
-python3-libipa_hbac-2.5.2-2.el8_5.1.x86_64
-python3-libnmstate-1.2.0-0.1.alpha2.el8.noarch
+python3-libipa_hbac-2.6.1-2.el8.x86_64
+python3-libnmstate-1.2.0-1.el8.noarch
@@ -805 +801 @@
-python3-linux-procfs-0.6.3-4.el8.noarch
+python3-linux-procfs-0.7.0-1.el8.noarch
@@ -837 +833 @@
-python3-perf-4.18.0-348.2.1.el8_5.x86_64
+python3-perf-4.18.0-358.el8.x86_64
@@ -860,2 +856,2 @@
-python3-rados-16.2.6-1.el8s.x86_64
-python3-rbd-16.2.6-1.el8s.x86_64
+python3-rados-16.2.7-1.el8s.x86_64
+python3-rbd-16.2.7-1.el8s.x86_64
@@ -865 +861 @@
-python3-rgw-16.2.6-1.el8s.x86_64
+python3-rgw-16.2.7-1.el8s.x86_64
@@ -867 +863 @@
-python3-rpm-4.14.3-19.el8.x86_64
+python3-rpm-4.14.3-21.el8.x86_64
@@ -875,3 +871,3 @@
-python3-sss-2.5.2-2.el8_5.1.x86_64
-python3-sss-murmur-2.5.2-2.el8_5.1.x86_64
-python3-sssdconfig-2.5.2-2.el8_5.1.noarch
+python3-sss-2.6.1-2.el8.x86_64
+python3-sss-murmur-2.6.1-2.el8.x86_64
+python3-sssdconfig-2.6.1-2.el8.noarch
@@ -879 +875 @@
-python3-subscription-manager-rhsm-1.28.21-3.el8.x86_64
+python3-subscription-manager-rhsm-1.28.24-1.el8.x86_64
@@ -881 +877 @@
-python3-syspurpose-1.28.21-3.el8.x86_64
+python3-syspurpose-1.28.24-1.el8.x86_64
@@ -914,4 +910,4 @@
-rpm-4.14.3-19.el8.x86_64
-rpm-build-libs-4.14.3-19.el8.x86_64
-rpm-libs-4.14.3-19.el8.x86_64
-rpm-plugin-selinux-4.14.3-19.el8.x86_64
+rpm-4.14.3-21.el8.x86_64
+rpm-build-libs-4.14.3-21.el8.x86_64
+rpm-libs-4.14.3-21.el8.x86_64
+rpm-plugin-selinux-4.14.3-21.el8.x86_64
@@ -925,3 +921,3 @@
-samba-client-libs-4.14.5-2.el8.x86_64
-samba-common-4.14.5-2.el8.noarch
-samba-common-libs-4.14.5-2.el8.x86_64
+samba-client-libs-4.15.3-0.el8.x86_64
+samba-common-4.15.3-0.el8.noarch
+samba-common-libs-4.15.3-0.el8.x86_64
@@ -931,2 +927,2 @@
-sbd-1.5.0-2.el8.x86_64
-scap-security-guide-0.1.57-5.el8.noarch
+sbd-1.5.1-1.el8.x86_64
+scap-security-guide-0.1.59-1.el8.noarch
@@ -937,2 +933,2 @@
-selinux-policy-3.14.3-85.el8.noarch
-selinux-policy-targeted-3.14.3-85.el8.noarch
+selinux-policy-3.14.3-86.el8.noarch
+selinux-policy-targeted-3.14.3-86.el8.noarch
@@ -950 +946 @@
-sos-4.2-7.el8.noarch
+sos-4.2-11.el8.noarch
@@ -956,9 +952,9 @@
-sssd-client-2.5.2-2.el8_5.1.x86_64
-sssd-common-2.5.2-2.el8_5.1.x86_64
-sssd-common-pac-2.5.2-2.el8_5.1.x86_64
-sssd-dbus-2.5.2-2.el8_5.1.x86_64
-sssd-ipa-2.5.2-2.el8_5.1.x86_64
-sssd-kcm-2.5.2-2.el8_5.1.x86_64
-sssd-krb5-common-2.5.2-2.el8_5.1.x86_64
-sssd-tools-2.5.2-2.el8_5.1.x86_64
-subscription-manager-rhsm-certificates-1.28.21-3.el8.x86_64
+sssd-client-2.6.1-2.el8.x86_64
+sssd-common-2.6.1-2.el8.x86_64
+sssd-common-pac-2.6.1-2.el8.x86_64
+sssd-dbus-2.6.1-2.el8.x86_64
+sssd-ipa-2.6.1-2.el8.x86_64
+sssd-kcm-2.6.1-2.el8.x86_64
+sssd-krb5-common-2.6.1-2.el8.x86_64
+sssd-tools-2.6.1-2.el8.x86_64
+subscription-manager-rhsm-certificates-1.28.24-1.el8.x86_64
@@ -976,5 +972,5 @@
-systemd-239-51.el8.x86_64
-systemd-container-239-51.el8.x86_64
-systemd-libs-239-51.el8.x86_64
-systemd-pam-239-51.el8.x86_64
-systemd-udev-239-51.el8.x86_64
+systemd-239-51.el8_5.2.x86_64
+systemd-container-239-51.el8_5.2.x86_64
+systemd-libs-239-51.el8_5.2.x86_64
+systemd-pam-239-51.el8_5.2.x86_64
+systemd-udev-239-51.el8_5.2.x86_64
@@ -982 +978 @@
-tcpdump-4.9.3-2.el8.x86_64
+tcpdump-4.9.3-3.el8.x86_64
@@ -993 +989 @@
-usbredir-0.8.0-1.el8.x86_64
+usbredir-0.12.0-1.el8.x86_64
@@ -997,11 +993,11 @@
-vdsm-4.40.90.4-1.el8.x86_64
-vdsm-api-4.40.90.4-1.el8.noarch
-vdsm-client-4.40.90.4-1.el8.noarch
-vdsm-common-4.40.90.4-1.el8.noarch
-vdsm-gluster-4.40.90.4-1.el8.x86_64
-vdsm-http-4.40.90.4-1.el8.noarch
-vdsm-jsonrpc-4.40.90.4-1.el8.noarch
-vdsm-network-4.40.90.4-1.el8.x86_64
-vdsm-python-4.40.90.4-1.el8.noarch
-vdsm-yajsonrpc-4.40.90.4-1.el8.noarch
-vim-minimal-8.0.1763-16.el8_5.2.x86_64
+vdsm-4.40.100.2-1.el8.x86_64
+vdsm-api-4.40.100.2-1.el8.noarch
+vdsm-client-4.40.100.2-1.el8.noarch
+vdsm-common-4.40.100.2-1.el8.noarch
+vdsm-gluster-4.40.100.2-1.el8.x86_64
+vdsm-http-4.40.100.2-1.el8.noarch
+vdsm-jsonrpc-4.40.100.2-1.el8.noarch
+vdsm-network-4.40.100.2-1.el8.x86_64
+vdsm-python-4.40.100.2-1.el8.noarch
+vdsm-yajsonrpc-4.40.100.2-1.el8.noarch
+vim-minimal-8.0.1763-16.el8_5.3.x86_64
@@ -1011 +1007 @@
-virt-what-1.18-12.el8.x86_64
+virt-what-1.18-13.el8.x86_64
See the release notes [1] for installation instructions and a list of new
features and bugs fixed.
Additional resources:
-
Read more about the oVirt 4.4.10 release highlights:
https://www.ovirt.org/release/4.4.10/
-
Get more oVirt project updates on Twitter: https://twitter.com/ovirt
-
Check out the latest project news on the oVirt blog:
https://blogs.ovirt.org/
[1] https://www.ovirt.org/release/4.4.10/
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://www.redhat.com/>
*Red Hat respects your work life balance. Therefore there is no need to
answer this email out of your office hours.*
