- Announce - oVirt List Archives

Re: [ovirt-users] Re: Re: [ANN] oVirt 4.3.4 First Release Candidate is now available
by Nir Soffer 16 May '19

16 May '19

On Thu, May 16, 2019 at 10:02 PM Strahil <hunter86_bg(a)yahoo.com> wrote: > This is my previous e-mail: > > On May 16, 2019 15:23, Strahil Nikolov <hunter86_bg(a)yahoo.com> wrote: > > It seems that the issue is within the 'dd' command as it stays waiting for > input: > > [root@ovirt1 mnt]# /usr/bin/dd iflag=fullblock of=file > oflag=direct,seek_bytes seek=1048576 bs=256512 count=1 > conv=notrunc,nocreat,fsync ^C0+0 records in > 0+0 records out > 0 bytes (0 B) copied, 19.3282 s, 0.0 kB/s > > Changing the dd command works and shows that the gluster is working: > > [root@ovirt1 mnt]# cat /dev/urandom | /usr/bin/dd of=file > oflag=direct,seek_bytes seek=1048576 bs=256512 count=1 > conv=notrunc,nocreat,fsync 0+1 records in > 0+1 records out > 131072 bytes (131 kB) copied, 0.00705081 s, 18.6 MB/s > > Best Regards, > > Strahil Nikolov > > ----- Препратено съобщение ----- > > *От:* Strahil Nikolov <hunter86_bg(a)yahoo.com> > > *До:* Users <users(a)ovirt.org> > > *Изпратено:* четвъртък, 16 май 2019 г., 5:56:44 ч. Гринуич-4 > > *Тема:* ovirt 4.3.3.7 cannot create a gluster storage domain > > Hey guys, > > I have recently updated (yesterday) my platform to latest available (v > 4.3.3.7) and upgraded to gluster v6.1 .The setup is hyperconverged 3 node > cluster with ovirt1/gluster1 & ovirt2/gluster2 as replica nodes (glusterX > is for gluster communication) while ovirt3 is the arbiter. > > Today I have tried to add new domain storages but they fail with the > following: > > 2019-05-16 10:15:21,296+0300 INFO (jsonrpc/2) [vdsm.api] FINISH > createStorageDomain error=Command ['/usr/bin/dd', 'iflag=fullblock', > u'of=/rhev/data-center/mnt/glusterSD/gluster1:_data__fast2/591d9b61-5c7d-4388-a6b7-ab03181dff8a/dom_md/xleases', > 'oflag=direct,seek_bytes', 'seek=1048576', 'bs=256512', 'count=1', > 'conv=notrunc,nocreat,fsync'] failed with rc=1 out='[suppressed]' > err="/usr/bin/dd: error writing > '/rhev/data-center/mnt/glusterSD/gluster1:_data__fast2/591d9b61-5c7d-4388-a6b7-ab03181dff8a/dom_md/xleases': > Invalid argument\n1+0 records in\n0+0 records out\n0 bytes (0 B) copied, > 0.0138582 s, 0.0 kB/s\n" from=::ffff:192.168.1.2,43864, flow_id=4a54578a, > task_id=d2535d0f-c7f7-4f31-a10f-704923ce1790 (api:52) > > This may be another issue. This command works only for storage with 512 bytes sector size. Hyperconverge systems may use VDO, and it must be configured in compatibility mode to support 512 bytes sector size. I'm not sure how this is configured but Sahina should know. Nir > 2019-05-16 10:15:21,296+0300 ERROR (jsonrpc/2) [storage.TaskManager.Task] > (Task='d2535d0f-c7f7-4f31-a10f-704923ce1790') Unexpected error (task:875) > Traceback (most recent call last): > File "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 882, > in _run > return fn(*args, **kargs) > File "<string>", line 2, in createStorageDomain > File "/usr/lib/python2.7/site-packages/vdsm/common/api.py", line 50, in > method > ret = func(*args, **kwargs) > File "/usr/lib/python2.7/site-packages/vdsm/storage/hsm.py", line 2614, > in createStorageDomain > storageType, domVersion, block_size, alignment) > File "/usr/lib/python2.7/site-packages/vdsm/storage/nfsSD.py > <http://nfssd.py/>", line 106, in create > block_size) > File "/usr/lib/python2.7/site-packages/vdsm/storage/fileSD.py > <http://filesd.py/>", line 466, in _prepareMetadata > cls.format_external_leases(sdUUID, xleases_path) > File "/usr/lib/python2.7/site-packages/vdsm/storage/sd.py", line 1255, > in format_external_leases > xlease.format_index(lockspace, backend) > File "/usr/lib/python2.7/site-packages/vdsm/storage/xlease.py", line > 681, in format_index > index.dump(file) > File "/usr/lib/python2.7/site-packages/vdsm/storage/xlease.py", line > 843, in dump > file.pwrite(INDEX_BASE, self._buf) > File "/usr/lib/python2.7/site-packages/vdsm/storage/xlease.py", line > 1076, in pwr > > > It seems that the 'dd' is having trouble checking the new gluster volume. > The output is from the RC1 , but as you see Darell's situation is maybe > the same. > On May 16, 2019 21:41, Nir Soffer <nsoffer(a)redhat.com> wrote: > > On Thu, May 16, 2019 at 8:38 PM Darrell Budic <budic(a)onholyground.com> > wrote: > > I tried adding a new storage domain on my hyper converged test cluster > running Ovirt 4.3.3.7 and gluster 6.1. I was able to create the new > gluster volume fine, but it’s not able to add the gluster storage domain > (as either a managed gluster volume or directly entering values). The > created gluster volume mounts and looks fine from the CLI. Errors in VDSM > log: > > ... > > 2019-05-16 10:25:09,584-0500 ERROR (jsonrpc/5) [storage.fileSD] Underlying > file system doesn't supportdirect IO (fileSD:110) > 2019-05-16 10:25:09,584-0500 INFO (jsonrpc/5) [vdsm.api] FINISH > createStorageDomain error=Storage Domain target is unsupported: () > from=::ffff:10.100.90.5,44732, flow_id=31d993dd, > task_id=ecea28f3-60d4-476d-9ba8-b753b7c9940d (api:52) > > > The direct I/O check has failed. > > This is the code doing the check: > > 98 def validateFileSystemFeatures(sdUUID, mountDir): > 99 try: > 100 # Don't unlink this file, we don't have the cluster lock yet > as it > 101 # requires direct IO which is what we are trying to test for. > This > 102 # means that unlinking the file might cause a race. Since we > don't > 103 # care what the content of the file is, just that we managed to > 104 # open it O_DIRECT. > 105 testFilePath = os.path.join(mountDir, "__DIRECT_IO_TEST__") > 106 oop.getProcessPool(sdUUID).directTouch(testFilePath) > > > 107 except OSError as e: > 108 if e.errno == errno.EINVAL: > 109 log = logging.getLogger("storage.fileSD") > 110 log.error("Underlying file system doesn't support" > >

1 0

Re: [ovirt-users] Re: Re: [ANN] oVirt 4.3.4 First Release Candidate is now available
by Nir Soffer 16 May '19

16 May '19

On Thu, May 16, 2019 at 8:38 PM Darrell Budic <budic(a)onholyground.com> wrote: > I tried adding a new storage domain on my hyper converged test cluster > running Ovirt 4.3.3.7 and gluster 6.1. I was able to create the new gluster > volume fine, but it’s not able to add the gluster storage domain (as either > a managed gluster volume or directly entering values). The created gluster > volume mounts and looks fine from the CLI. Errors in VDSM log: > > ... > 2019-05-16 10:25:09,584-0500 ERROR (jsonrpc/5) [storage.fileSD] Underlying > file system doesn't supportdirect IO (fileSD:110) > 2019-05-16 10:25:09,584-0500 INFO (jsonrpc/5) [vdsm.api] FINISH > createStorageDomain error=Storage Domain target is unsupported: () > from=::ffff:10.100.90.5,44732, flow_id=31d993dd, > task_id=ecea28f3-60d4-476d-9ba8-b753b7c9940d (api:52) > The direct I/O check has failed. This is the code doing the check: 98 def validateFileSystemFeatures(sdUUID, mountDir): 99 try: 100 # Don't unlink this file, we don't have the cluster lock yet as it 101 # requires direct IO which is what we are trying to test for. This 102 # means that unlinking the file might cause a race. Since we don't 103 # care what the content of the file is, just that we managed to 104 # open it O_DIRECT. 105 testFilePath = os.path.join(mountDir, "__DIRECT_IO_TEST__") 106 oop.getProcessPool(sdUUID).directTouch(testFilePath) 107 except OSError as e: 108 if e.errno == errno.EINVAL: 109 log = logging.getLogger("storage.fileSD") 110 log.error("Underlying file system doesn't support" 111 "direct IO") 112 raise se.StorageDomainTargetUnsupported() 113 114 raise The actual check is done in ioprocess, using: 319 fd = open(path->str, allFlags, mode); 320 if (fd == -1) { 321 rv = fd; 322 goto clean; 323 } 324 325 rv = futimens(fd, NULL); 326 if (rv < 0) { 327 goto clean; 328 } With: allFlags = O_WRONLY | O_CREAT | O_DIRECT See: https://github.com/oVirt/ioprocess/blob/7508d23e19aeeb4dfc180b854a5a92690d2… According to the error message: Underlying file system doesn't support direct IO We got EINVAL, which is possible only from open(), and is likely an issue opening the file with O_DIRECT. So something is wrong in the files system. To confirm, you can try to do: dd if=/dev/zero of=/path/to/mountoint/test bs=4096 count=1 oflag=direct This will probably fail with: dd: failed to open '/path/to/mountoint/test': Invalid argument If it succeeds, but oVirt fail to connect to this domain, file a bug and we will investigate. Nir > > On May 16, 2019, at 11:55 AM, Nir Soffer <nsoffer(a)redhat.com> wrote: > > On Thu, May 16, 2019 at 7:42 PM Strahil <hunter86_bg(a)yahoo.com> wrote: > >> Hi Sandro, >> >> Thanks for the update. >> >> I have just upgraded to RC1 (using gluster v6 here) and the issue I >> detected in 4.3.3.7 - where gluster Storage domain fails creation - is >> still present. >> > > What is is this issue? can you provide a link to the bug/mail about it? > > Can you check if the 'dd' command executed during creation has been >> recently modified ? >> >> I've received update from Darrell (also gluster v6) , but haven't >> received an update from anyone who is using gluster v5 -> thus I haven't >> opened a bug yet. >> >> Best Regards, >> Strahil Nikolov >> On May 16, 2019 11:21, Sandro Bonazzola <sbonazzo(a)redhat.com> wrote: >> >> The oVirt Project is pleased to announce the availability of the oVirt >> 4.3.4 First Release Candidate, as of May 16th, 2019. >> >> This update is a release candidate of the fourth in a series of >> stabilization updates to the 4.3 series. >> This is pre-release software. This pre-release should not to be used >> inproduction. >> >> This release is available now on x86_64 architecture for: >> * Red Hat Enterprise Linux 7.6 or later >> * CentOS Linux (or similar) 7.6 or later >> >> This release supports Hypervisor Hosts on x86_64 and ppc64le >> architectures for: >> * Red Hat Enterprise Linux 7.6 or later >> * CentOS Linux (or similar) 7.6 or later >> * oVirt Node 4.3 (available for x86_64 only) >> >> Experimental tech preview for x86_64 and s390x architectures for Fedora >> 28 is also included. >> >> See the release notes [1] for installation / upgrade instructions and a >> list of new features and bugs fixed. >> >> Notes: >> - oVirt Appliance is already available >> - oVirt Node is already available[2] >> >> Additional Resources: >> * Read more about the oVirt 4.3.4 release highlights: >> http://www.ovirt.org/release/4.3.4/ >> * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt >> * Check out the latest project news on the oVirt blog: >> http://www.ovirt.org/blog/ >> >> [1] http://www.ovirt.org/release/4.3.4/ >> [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ >> >> -- >> Sandro Bonazzola >> >> MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV >> >> Red Hat EMEA <https://www.redhat.com/> >> sbonazzo(a)redhat.com >> <https://red.ht/sig> >> <https://redhat.com/summit> >> >> _______________________________________________ >> Users mailing list -- users(a)ovirt.org >> To unsubscribe send an email to users-leave(a)ovirt.org >> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/REDV54BH7CIID… >> > _______________________________________________ > Announce mailing list -- announce(a)ovirt.org > To unsubscribe send an email to announce-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/announce@ovirt.org/message/ABFECS5ES4… > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/RO6PQQ4XQ6KZX… >

1 0

Re: [ovirt-users] Re: [ANN] oVirt 4.3.4 First Release Candidate is now available
by Nir Soffer 16 May '19

16 May '19

On Thu, May 16, 2019 at 7:42 PM Strahil <hunter86_bg(a)yahoo.com> wrote: > Hi Sandro, > > Thanks for the update. > > I have just upgraded to RC1 (using gluster v6 here) and the issue I > detected in 4.3.3.7 - where gluster Storage domain fails creation - is > still present. > What is is this issue? can you provide a link to the bug/mail about it? Can you check if the 'dd' command executed during creation has been > recently modified ? > > I've received update from Darrell (also gluster v6) , but haven't > received an update from anyone who is using gluster v5 -> thus I haven't > opened a bug yet. > > Best Regards, > Strahil Nikolov > On May 16, 2019 11:21, Sandro Bonazzola <sbonazzo(a)redhat.com> wrote: > > The oVirt Project is pleased to announce the availability of the oVirt > 4.3.4 First Release Candidate, as of May 16th, 2019. > > This update is a release candidate of the fourth in a series of > stabilization updates to the 4.3 series. > This is pre-release software. This pre-release should not to be used > inproduction. > > This release is available now on x86_64 architecture for: > * Red Hat Enterprise Linux 7.6 or later > * CentOS Linux (or similar) 7.6 or later > > This release supports Hypervisor Hosts on x86_64 and ppc64le architectures > for: > * Red Hat Enterprise Linux 7.6 or later > * CentOS Linux (or similar) 7.6 or later > * oVirt Node 4.3 (available for x86_64 only) > > Experimental tech preview for x86_64 and s390x architectures for Fedora 28 > is also included. > > See the release notes [1] for installation / upgrade instructions and a > list of new features and bugs fixed. > > Notes: > - oVirt Appliance is already available > - oVirt Node is already available[2] > > Additional Resources: > * Read more about the oVirt 4.3.4 release highlights: > http://www.ovirt.org/release/4.3.4/ > * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt > * Check out the latest project news on the oVirt blog: > http://www.ovirt.org/blog/ > > [1] http://www.ovirt.org/release/4.3.4/ > [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ > > -- > > Sandro Bonazzola > > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV > > Red Hat EMEA <https://www.redhat.com/> > > sbonazzo(a)redhat.com > <https://red.ht/sig> > <https://redhat.com/summit> > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/REDV54BH7CIID… >

1 0

[ANN] oVirt 4.3.4 First Release Candidate is now available
by Sandro Bonazzola 16 May '19

16 May '19

The oVirt Project is pleased to announce the availability of the oVirt 4.3.4 First Release Candidate, as of May 16th, 2019. This update is a release candidate of the fourth in a series of stabilization updates to the 4.3 series. This is pre-release software. This pre-release should not to be used inproduction. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later * oVirt Node 4.3 (available for x86_64 only) Experimental tech preview for x86_64 and s390x architectures for Fedora 28 is also included. See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Node is already available[2] Additional Resources: * Read more about the oVirt 4.3.4 release highlights: http://www.ovirt.org/release/4.3.4/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.4/ [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig> <https://redhat.com/summit>

1 0

oVirt 4.3.3 third async update is now available
by Sandro Bonazzola 06 May '19

06 May '19

The oVirt Team has just released a new version of the following packages: - ovirt-engine-4.3.3.7 The async release includes an additional fix ( https://gerrit.ovirt.org/#/c/99738/) for Bug 1697367 <https://bugzilla.redhat.com/show_bug.cgi?id=1697367> - make SMT setting more user friendly Thanks, -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig> <https://redhat.com/summit>

1 0

oVirt VM Table View Survey
by Sandro Bonazzola 02 May '19

02 May '19

Hi, the oVirt UX team at Red Hat would like to get your feedback on the VM table view that's featured in the admin portal. The survey will also run during Summit out of the UXD research and feedback booth. We kindly ask you to join the survey and answer at https://redhatdg.co1.qualtrics.com/jfe/form/SV_cGwhuzRUQGTXnp3 This survey is under oVirt Privacy Policy available at https://www.ovirt.org/site/privacy-policy.html -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig> <https://redhat.com/summit>

1 0

[ANN] oVirt 4.3.3 second async update is now available
by Sandro Bonazzola 24 Apr '19

24 Apr '19

The oVirt Team has just released a new version of the following packages: - ovirt-engine-4.3.3.6 The async release addresses the following bugs: - Bug 1701205 <https://bugzilla.redhat.com/show_bug.cgi?id=1701205> - Creating a new VM over the not defaulted cluster fails with "CPU Profile doesn't match provided Cluster" error. - Bug 1700759 <https://bugzilla.redhat.com/show_bug.cgi?id=1700759> - engine failed schema refresh v4.3.2 -> v4.3.3 Thanks, -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

1 0

[ANN] ovirt 4.3.3 async update is now available
by Sandro Bonazzola 17 Apr '19

17 Apr '19

The oVirt Team has just released a new version of the following packages: - cockpit-ovirt-0.12.8 - ovirt-release43-4.3.3.1 - oVirt Node The async release addresses the following bugs: Bug 1697965 <https://bugzilla.redhat.com/show_bug.cgi?id=1697965> - [gluster-ansible] Order of the hosts are not preserved, when creating the volume This fix is relevant only on new deployments. -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

1 0

[ANN] oVirt 4.3.3 is now generally available
by Sandro Bonazzola 16 Apr '19

16 Apr '19

The oVirt Project is pleased to announce the general availability of oVirt 4.3.3 as of April 16th, 2019. This update is the third in a series of stabilization updates to the 4.3 series. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later * oVirt Node 4.3 (available for x86_64 only) Experimental tech preview for x86_64 and s390x architectures for Fedora 28 is also included. See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Node is already available[2] oVirt Node has been updated including: - oVirt 4.3.3: http://www.ovirt.org/release/4.3.3/ - ansible-2.7.10: https://github.com/ansible/ansible/blob/stable-2.7/changelogs/CHANGELOG-v2.… - glusterfs-5.5: https://docs.gluster.org/en/latest/release-notes/5.5/ - Latest CentOS updates including: - CESA-2019:0679 Important CentOS 7 libssh2 Security Update <https://lists.centos.org/pipermail/centos-announce/2019-April/023259.html> - CESA-2019:0710 Important CentOS 7 python Security Update <https://lists.centos.org/pipermail/centos-announce/2019-April/023268.html> - CEEA-2019:0507 CentOS 7 shadow-utils Enhancement Update <https://lists.centos.org/pipermail/centos-announce/2019-March/023228.html> - CEBA-2019:0519 CentOS 7 NetworkManager BugFix Update <https://lists.centos.org/pipermail/centos-announce/2019-March/023242.html> - CEBA-2019:0509 CentOS 7 dbus BugFix Update <https://lists.centos.org/pipermail/centos-announce/2019-March/023245.html> - CEBA-2019:0515 CentOS 7 fcoe-utils BugFix Update <https://lists.centos.org/pipermail/centos-announce/2019-March/023246.html> - CEBA-2019:0728 CentOS 7 glibc BugFix Update <https://lists.centos.org/pipermail/centos-announce/2019-April/023269.html> - CEBA-2019:0518 CentOS 7 gnutls BugFix Update <https://lists.centos.org/pipermail/centos-announce/2019-March/023233.html> - CEBA-2019:0508 CentOS 7 ipa BugFix Update <https://lists.centos.org/pipermail/centos-announce/2019-March/023241.html> - CEBA-2019:0513 CentOS 7 libguestfs BugFix Update <https://lists.centos.org/pipermail/centos-announce/2019-March/023232.html> - CEBA-2019:0521 CentOS 7 libvirt BugFix Update <https://lists.centos.org/pipermail/centos-announce/2019-March/023239.html> - CEBA-2019:0500 CentOS 7 nss-pem BugFix Update <https://lists.centos.org/pipermail/centos-announce/2019-March/023240.html> - CEBA-2019:0503 CentOS 7 sos BugFix Update <https://lists.centos.org/pipermail/centos-announce/2019-March/023231.html> - CEBA-2019:0496 CentOS 7 tuned BugFix Update <https://lists.centos.org/pipermail/centos-announce/2019-March/023230.html> - CEBA-2019:0689 CentOS 7 tzdata BugFix Update <https://lists.centos.org/pipermail/centos-announce/2019-April/023260.html> - CEBA-2019:0504 CentOS 7 util-linux BugFix Update <https://lists.centos.org/pipermail/centos-announce/2019-March/023226.html> - CEBA-2019:0516 CentOS 7 xfsprogs BugFix Update <https://lists.centos.org/pipermail/centos-announce/2019-March/023227.html> Additional Resources: * Read more about the oVirt 4.3.3 release highlights: http://www.ovirt.org/release/4.3.3/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.3/ [2] http://resources.ovirt.org/pub/ovirt-4.3/iso/ -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

1 0

[ANN] oVirt 4.3.3 Fourth Release Candidate is now available
by Sandro Bonazzola 12 Apr '19

12 Apr '19

The oVirt Project is pleased to announce the availability of the oVirt 4.3.3 Fourth Release Candidate, as of April 12th, 2019. This update is a release candidate of the third in a series of stabilization updates to the 4.3 series. This is pre-release software. This pre-release should not to be used in production. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later * oVirt Node 4.3 (available for x86_64 only) Experimental tech preview for x86_64 and s390x architectures for Fedora 28 is also included. See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance will be available soon - oVirt Node will be available soon[2] Additional Resources: * Read more about the oVirt 4.3.3 release highlights: http://www.ovirt.org/release/4.3.3/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.3/ [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

1 0