December 2013 - Users - oVirt List Archives

[Users] Strange UI bug: tab "VM" unusable / oVirt 3.3.1+
by Frank Wall 28 Jan '14

28 Jan '14

Hi, I'm experiencing a strange UI bug in the Amdin Portal. The "Virtual Machines" tab is unusable in serval ways: - when selecting a VM, all buttons are greyed-out, except "New VM" - you cannot power on, power off, open console or edit a VM - when selecting a VM, the VM-specific tabs do not appear on the bottom All other tabs, especially the "Hosts" tab are working as expected. Initially I suspected an incompatible browser on my side, so I tried with Firefox 25, Chrome and IE 11. No success. This UI bug hit me after upgrading from oVirt 3.3.0 to 3.3.1. And it is still reproducable in oVirt 3.3.2 BETA1. Any hint on this? Or any advice how to provide some useful debug output? I have to mention that I am able to workaround this bug: - select a VM - right click, choose "New VM", click "Cancel" - now most VM actions are no longer greyed-out - power on the VM - still the "console" button remains greyed-out Thanks - Frank

5 19

[Users] disks successfully removed with torage failure message
by Gianluca Cecchi 23 Jan '14

23 Jan '14

Hello, 3.3.2 beta on Fedora 19 engine with 2 Fedora 19 hosts and GusterFS

4 10

Re: [Users] Problem with python-cpopen dependency on f19 AIO stable
by Martijn Grendelman 22 Jan '14

22 Jan '14

I have the same issue on a CentOS node after updating it to 6.5: > Resolving Dependencies > --> Running transaction check > ---> Package python-cpopen.x86_64 0:1.2.3-4.el6 will be obsoleted > ---> Package vdsm-python-cpopen.x86_64 0:4.13.0-11.el6 will be obsoleting > --> Finished Dependency Resolution > > Dependencies Resolved > > ======================================================================================================================================================== > Package Arch Version Repository Size > ======================================================================================================================================================== > Installing: > vdsm-python-cpopen x86_64 4.13.0-11.el6 ovirt-stable 19 k > replacing python-cpopen.x86_64 1.2.3-4.el6 > > Transaction Summary > ======================================================================================================================================================== > Install 1 Package(s) > > Total download size: 19 k > Is this ok [y/N]: y On a subsequent run of 'yum update', python-cpopen will replace vdsm-python-cpopen, and so on. Cheers, Martijn. Vinzenz Feenstra schreef op 5-12-2013 8:34: > Forwading to vdsm-devel > > On 12/04/2013 08:59 AM, Gianluca Cecchi wrote: >> Hello, >> since yesterday evening I have this sort of dependency problem with updates >> >> yum update >> say >> >> Resolving Dependencies >> --> Running transaction check >> ---> Package python-cpopen.x86_64 0:1.2.3-4.fc19 will be obsoleting >> ---> Package vdsm-python-cpopen.x86_64 0:4.13.0-11.fc19 will be obsoleted >> --> Finished Dependency Resolution >> >> Dependencies Resolved >> >> ============================================================================================================================= >> Package Arch Version >> Repository Size >> ============================================================================================================================= >> Installing: >> python-cpopen x86_64 >> 1.2.3-4.fc19 updates 19 k >> replacing vdsm-python-cpopen.x86_64 4.13.0-11.fc19 >> >> Transaction Summary >> ============================================================================================================================= >> Install 1 Package >> >> If I go ahead and run yum update again I have: >> >> Dependencies Resolved >> >> ============================================================================================================================= >> Package Arch Version >> Repository Size >> ============================================================================================================================= >> Installing: >> vdsm-python-cpopen x86_64 >> 4.13.0-11.fc19 ovirt-stable 20 k >> replacing python-cpopen.x86_64 1.2.3-4.fc19 >> >> Transaction Summary >> ============================================================================================================================= >> Install 1 Package >> >> and so again in a loop.... >> >> Gianluca >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users > >

3 2

[Users] Network profile lost after host edit
by Simon Barrett 20 Jan '14

20 Jan '14

--_000_D86C48DF8800164BBE50B87623F7AC9548080D6Eln2wio001devtra_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable I have a problem where VM network profiles are lost when editing a host. E.= G. * VM is running fine on the correct network. Network Interfaces tab= shows "nic1" and "Network Name" shows the correct network profile. * I shutdown the VM then right click and Edit. * The General settings for the node shows "nic1 <Empty>". If I then= edit config, something like increasing memory or changing CPU cores then c= lick on OK, the VM configuration is saved without a network profile. * When I boot the VM I cannot connect to it. * I then have to edit the node again configure back in the correct = network profile. Does anyone know if this is a known issue? If not, any suggestions as to ho= w I correct this so that the original network profile definition is retaine= d after an edit? Many thanks, Simon --_000_D86C48DF8800164BBE50B87623F7AC9548080D6Eln2wio001devtra_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"EN-GB" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> <p class=3D"MsoNormal">I have a problem where VM network profiles are lost = when editing a host. E.G.<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoListParagraph" style=3D"text-indent:-18.0pt;mso-list:l0 leve= l1 lfo1"><![if !supportLists]><span style=3D"font-family:Symbol"><span styl= e=3D"mso-list:Ignore">·<span style=3D"font:7.0pt "Times New Rom= an"">         </span></span></span><![endif]>VM is running fine on the correct network. N= etwork Interfaces tab shows “nic1” and “Network Name&#822= 1; shows the correct network profile.<o:p></o:p></p> <p class=3D"MsoListParagraph" style=3D"text-indent:-18.0pt;mso-list:l0 leve= l1 lfo1"><![if !supportLists]><span style=3D"font-family:Symbol"><span styl= e=3D"mso-list:Ignore">·<span style=3D"font:7.0pt "Times New Rom= an"">         </span></span></span><![endif]>I shutdown the VM then right click and Edit.= <o:p></o:p></p> <p class=3D"MsoListParagraph" style=3D"text-indent:-18.0pt;mso-list:l0 leve= l1 lfo1"><![if !supportLists]><span style=3D"font-family:Symbol"><span styl= e=3D"mso-list:Ignore">·<span style=3D"font:7.0pt "Times New Rom= an"">         </span></span></span><![endif]>The General settings for the node shows &#82= 20;nic1 <Empty>”. If I then edit config, something like increas= ing memory or changing CPU cores then click on OK, the VM configuration is = saved without a network profile.<o:p></o:p></p> <p class=3D"MsoListParagraph" style=3D"text-indent:-18.0pt;mso-list:l0 leve= l1 lfo1"><![if !supportLists]><span style=3D"font-family:Symbol"><span styl= e=3D"mso-list:Ignore">·<span style=3D"font:7.0pt "Times New Rom= an"">         </span></span></span><![endif]>When I boot the VM I cannot connect to it.<o= :p></o:p></p> <p class=3D"MsoListParagraph" style=3D"text-indent:-18.0pt;mso-list:l0 leve= l1 lfo1"><![if !supportLists]><span style=3D"font-family:Symbol"><span styl= e=3D"mso-list:Ignore">·<span style=3D"font:7.0pt "Times New Rom= an"">         </span></span></span><![endif]>I then have to edit the node again configure= back in the correct network profile.<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Does anyone know if this is a known issue? If not, a= ny suggestions as to how I correct this so that the original network profil= e definition is retained after an edit?<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Many thanks,<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Simon<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> </div> </body> </html> --_000_D86C48DF8800164BBE50B87623F7AC9548080D6Eln2wio001devtra_--

4 11

[Users] Create VLAN for WAN traffic
by Neil Schulz 18 Jan '14

18 Jan '14

I'm not very knowledgeable in VLANs. Sorry for the lack of knowledge in advance. Is it possible to create a VLAN for WAN traffic, to separate it from the internal network? I'd imagine so. It was a automated and simple process when use XenServer. I'm trying to switch from Xen to oVirt and when trying to recreate this, I'm unable to ping out from the VM. This leads me to believe the VLAN was created incorrectly. I created ifcfg-br1 on the host and through the engine, created the logical network with VLAN tagging 20. Does the interface, ifcfg-br1, require a public IP, any IP address, no ip address? (Sorry, never created a VLAN for WAN traffic as it was automated in XenServer) From there I have the VM installed and configured with a public IP address, however, only get Destination Host Unreachable, meaning it has no route out. I am banging my head on the desk trying to figure this out. Can anyone give me any assistance? Thank you, Neil

4 5

[Users] ovirt-engine-reports rpm for CentOS and oVirt 3.3
by Nicolas Ecarnot 16 Jan '14

16 Jan '14

Good morning or whenever, I read what RPM I have to install here http://www.ovirt.org/Ovirt_Reports but I can not find any RPM for CentOS 6. I strongly searched around the web and in the different repo folders, as well as in the mailing list msgs, and it seems the production of RPM for CentOS has been disabled for whatever reason. Is there a private recipe to create them or get them an unofficial way (reports, dwh, jasperreports...) Thank you. -- Nicolas Ecarnot

3 4

[Users] [ANN] new fedora20 nightlies rpms for oVirt are available for download
by Eyal Edri 15 Jan '14

15 Jan '14

fyi, oVirt infra has added support for nighlies rpms for various oVirt projects for fedora 20. the following has be done: - All ovirt projects were added f20 nightlies on jenkins.ovirt.org. (replaced f18, which is NOT built nightly anymore). - One jenkins f19 slave (vm02) was upgraded to f20, and we also have a bare metal host running f20 as well. - Nightlies rpms can be downloaded on the repos [1] - Nightlies publish & cleanup scripts were updated on the resources.ovirt.org to support f20. I didn't update any ovirt-node* job, since i'm not familiar with them. if you would like to build f20 builds, just add the 'fedora20' label to the relevant jobs. Eyal. [1] http://resources.ovirt.org/releases/nightly/rpm/Fedora/20/

3 2

Re: [Users] GlusterFS Distributed Replicate
by a.ludas＠gmail.com 09 Jan '14

09 Jan '14

Hi, in a 2 node cluster you can set the path to localhost:volume. If one host goes down and SPM role switches to the remaining running host, your master domain is still accessible and so your VMs stay up and running. Regards, Alex -----Original message----- > From:gregoire.leroy@retenodus.net <gregoire.leroy(a)retenodus.net> > Sent: Friday 20th December 2013 15:10 > To: Andrew Lau <andrew(a)andrewklau.com> > Cc: users <users(a)ovirt.org> > Subject: Re: [Users] GlusterFS Distributed Replicate > > Hi, > > There are some things I don't understand. First of all, why do we need > keepalived ? I thought that it would be transparent at this layer and > that glusterfs would manage all the replication thing by itself. Is that > because I've POSIXFS instead of GlusterFS or is it totally unrelated ? > > Secondly, about the split-brain, when you says that I can read but not > write, does that mean I can't write data on the VM storage space or > can't I create VM ? If I can't write data, what would be the workaround > ? Am I force to have 3 (or 4, I guess, as I want to get replication) > nodes ? > > To conclude : can I get real HA (except engine) with Ovirt / Glusterfs > with 2 nodes ? > > Thank you very much, > Regards, > Grégoire Leroy > > > Le 2013-12-19 23:03, Andrew Lau a écrit : > > Hi, > > > > What I learned in the way glusterfs works is you specify the host > > only to grab the initial volume information, then it'll go directly to > > the other hosts to connect to the datastore - this avoids the > > bottleneck issue that NFS has. > > > > Knowing this, the work around I used was to setup keepalived on the > > gluster hosts (make sure you set it up on an interface other than your > > ovirtmgmt or you'll clash with the live migration components). So now > > if one of my hosts drop from the cluster, the storage access is not > > lost. I haven't fully tested the whole infrastructure yet but my only > > fear is they may drop into "PAUSE" mode during the keepalived > > transition period. > > > > Also - you may need to change your glusterfs ports so they don't > > interfere with vdsm. My post here was a little outdated but it still > > has my findings on keepalived > > etc. http://www.andrewklau.com/returning-to-glusterized-ovirt-3-3/ > > [2] > > > > The other thing to note, is you've only got two gluster hosts. I > > believe by default now ovirt sets the quorum setting which enforces > > that there must be atleast 2 nodes alive in your configuration. This > > means when there is only 1 gluster server up, you'll be able to read > > but not write this is to avoid split-brain. > > > > Thanks, > > Andrew > > > > On Thu, Dec 19, 2013 at 5:12 AM, <gregoire.leroy(a)retenodus.net> wrote: > > > >> Hello, > >> > >> As I said in a previous email, I have this configuration with Ovirt > >> 3.3 : > >> 1 Ovirt Engine > >> 2 Hosts Centos 6.5 > >> > >> I successfully setup GlusterFS. I created a distributed replicate > >> volume with 2 bricks : host1:/gluster and host2:/gluster. > >> > >> Then, I created a storage storage_gluster POSIXFS with the option > >> glusterfs and I gave the path "host1:/gluster". > >> > >> First, I'm rather surprised I have to specify an host for the > >> storage as I wish to have a distribute replicated storage. I > >> expected to specify both hosts. > >> > >> Then I create a VM on this storage. The expected behaviour if I > >> shutdown host1 should be that my VM keeps running on the second > >> brick. Yet, not only I lose my VM but host2 is in a non operationnal > >> status because one of its data storage is not reachable. > >> > >> Did I miss something in the configuration ? How could I get the > >> wanted behaviour ? > >> > >> Thanks a lot, > >> Regards, > >> Grégoire Leroy > >> _______________________________________________ > >> Users mailing list > >> Users(a)ovirt.org > >> http://lists.ovirt.org/mailman/listinfo/users [1] > > > > > > > > Links: > > ------ > > [1] http://lists.ovirt.org/mailman/listinfo/users > > [2] http://www.andrewklau.com/returning-to-glusterized-ovirt-3-3/ > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users >

6 12

[Users] What parameters to use in automated node install to enable engine CLI register?
by David Li 08 Jan '14

08 Jan '14

--1013620071-596302367-1387321157=:82527 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Hi,=0A=0A=0AMy node install followed the automatic install instructions in= =A0=0A=0Ahttps://access.redhat.com/site/documentation/en-US/Red_Hat_Enterpr= ise_Virtualization/3.0/html/Hypervisor_Deployment_Guide/sect-Deployment_Gui= de-Installing_Red_Hat_Enterprise_Virtualization_Hypervisors-RHEV_Hypervisor= _Kernel_Parameters_and_Automated_Installation.html=0A=0A=0A=0AFor the kerne= l boot parameters, I used=A0=0A=0Amanagement_server=3D<my machine IP runnin= g ovirt-shell CLI>=A0=0Arhevm_admin_password=3Dxyz=0A=0A=0AHowever I see a = few problems when I tried to use ovirt-shell CLI to connect to the engine.= =A0=0A=0A[oVirt shell (disconnected)]# connect --url "http://<node-IP>:8080= /api" --username "admin" --password "xyz"=0A=0A=0A=0A1. Though I can ping t= he node, but this cmd gave errors:=A0error: [Errno 113] No route to host=0A= 2. What should I use for "--username" argument? =A0What is "@domain"?=0A=0A= David --1013620071-596302367-1387321157=:82527 Content-Type: text/html; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"color:#000; background-color:#fff; font-family:ti= mes new roman, new york, times, serif;font-size:12pt"><div style=3D"font-fa= mily: 'times new roman', 'new york', times, serif; font-size: 12pt;">Hi,</d= iv><div style=3D"font-family: 'times new roman', 'new york', times, serif; = font-size: 12pt;"><br></div><div style=3D"font-family: 'times new roman', '= new york', times, serif; font-size: 16px; color: rgb(0, 0, 0); background-c= olor: transparent; font-style: normal;"><br></div><div style=3D"font-family= : 'times new roman', 'new york', times, serif; font-size: 16px; color: rgb(= 0, 0, 0); background-color: transparent; font-style: normal;">My node insta= ll followed the automatic install instructions in </div><div style=3D"= font-family: 'times new roman', 'new york', times, serif; font-size: 16px; = color: rgb(0, 0, 0); background-color: transparent; font-style: normal;"><b= r></div><div style=3D"font-family: 'times new roman', 'new york', times, se= rif; font-size: 16px; color: rgb(0, 0, 0); background-color: transparent; font-= style: normal;"><a href=3D"https://access.redhat.com/site/documentation/en-= US/Red_Hat_Enterprise_Virtualization/3.0/html/Hypervisor_Deployment_Guide/s= ect-Deployment_Guide-Installing_Red_Hat_Enterprise_Virtualization_Hyperviso= rs-RHEV_Hypervisor_Kernel_Parameters_and_Automated_Installation.html">https= ://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Virtualiza= tion/3.0/html/Hypervisor_Deployment_Guide/sect-Deployment_Guide-Installing_= Red_Hat_Enterprise_Virtualization_Hypervisors-RHEV_Hypervisor_Kernel_Parame= ters_and_Automated_Installation.html</a><br></div><div style=3D"font-family= : 'times new roman', 'new york', times, serif; font-size: 16px; color: rgb(= 0, 0, 0); background-color: transparent; font-style: normal;"><br></div><di= v style=3D"font-family: 'times new roman', 'new york', times, serif; font-s= ize: 16px; color: rgb(0, 0, 0); background-color: transparent; font-style: normal;"><br></div><div style=3D"font-family: 'times new roman', 'new york= ', times, serif; font-size: 16px; color: rgb(0, 0, 0); background-color: tr= ansparent; font-style: normal;">For the kernel boot parameters, I used&nbsp= ;</div><div style=3D"font-family: 'times new roman', 'new york', times, ser= if; font-size: 16px; color: rgb(0, 0, 0); background-color: transparent; fo= nt-style: normal;"><span style=3D"background-color: transparent; white-spac= e: pre-wrap; line-height: 1.15; font-family: Arial; font-size: 15px;"><br><= /span></div><div style=3D"font-family: Arial; font-size: 15px; color: rgb(0= , 0, 0); background-color: transparent; font-style: normal;"><span style=3D= "background-color: transparent; white-space: pre-wrap; line-height: 1.15; f= ont-family: Arial; font-size: 15px;">management_server=3D<my machine IP = running ovirt-shell CLI> </span></div><div style=3D"font-family: Ar= ial; font-size: 15px; color: rgb(0, 0, 0); background-color: transparent; font-style: normal;"><span style=3D"background-color: transparent; line-he= ight: 1.15; white-space: pre-wrap;">rhevm_admin_password=3Dxyz</span><br></= div><div style=3D"font-family: Arial; font-size: 15px; color: rgb(0, 0, 0);= background-color: transparent; font-style: normal;"><span style=3D"backgro= und-color: transparent; white-space: pre-wrap; line-height: 1.15; font-fami= ly: Arial; font-size: 15px;"><br></span></div><div style=3D"font-family: 't= imes new roman', 'new york', times, serif; font-size: 16px; color: rgb(0, 0= , 0); background-color: transparent; font-style: normal;">However I see a f= ew problems when I tried to use ovirt-shell CLI to connect to the engine.&n= bsp;</div><div style=3D"font-family: 'times new roman', 'new york', times, = serif; font-size: 16px; color: rgb(0, 0, 0); background-color: transparent;= font-style: normal;"><br></div><div style=3D"background-color: transparent= ;"><font face=3D"times new roman, new york, times, serif">[oVirt shell (disconnected)]# connect --url "http://<node-IP>:8080/api" --usernam= e "admin" --password "xyz"</font><br></div><div style=3D"background-color: = transparent; color: rgb(0, 0, 0); font-size: 16px; font-family: 'Times New = Roman'; font-style: normal;"><font face=3D"times new roman, new york, times= , serif"><br></font></div><div style=3D"font-family: 'times new roman', 'ne= w york', times, serif; font-size: 16px; color: rgb(0, 0, 0); background-col= or: transparent; font-style: normal;"><br></div><div style=3D"font-family: = 'times new roman', 'new york', times, serif; font-size: 16px; color: rgb(0,= 0, 0); background-color: transparent; font-style: normal;">1. Though I can= ping the node, but this cmd gave errors: error: [Errno 113] No route = to host</div><div style=3D"font-family: 'times new roman', 'new york', time= s, serif; font-size: 16px; color: rgb(0, 0, 0); background-color: transpare= nt; font-style: normal;">2. What should I use for "--username" argument?  What is "@domain"?</div><div style=3D"font-family: 'times new roman'= , 'new york', times, serif; font-size: 16px; color: rgb(0, 0, 0); backgroun= d-color: transparent; font-style: normal;"><br></div><div style=3D"font-fam= ily: 'times new roman', 'new york', times, serif; font-size: 16px; color: r= gb(0, 0, 0); background-color: transparent; font-style: normal;">David</div= ><div style=3D"font-family: 'times new roman', 'new york', times, serif; fo= nt-size: 16px; color: rgb(0, 0, 0); background-color: transparent; font-sty= le: normal;"><br></div><div style=3D"font-family: 'times new roman', 'new y= ork', times, serif; font-size: 16px; color: rgb(0, 0, 0); background-color:= transparent; font-style: normal;"><br></div></div></body></html> --1013620071-596302367-1387321157=:82527--

3 15

[Users] Fwd: Your stand proposal for oVirt has been accepted
by Dave Neary 06 Jan '14

06 Jan '14

Hi everyone, Great news! We will have an oVirt stand at FOSDEM in Brussels this year! Brian and I will be looking for volunteers to man the stand and spread the love about oVirt over the next few weeks - please let us know if you plan to attend FOSDEM, we would love to see you there! Also, I would love to have an oVirt community meet-up for beers on Saturday evening - if we did, would you be interested in attending? Let us know! Thanks, Dave. -------- Original Message -------- Subject: Your stand proposal for oVirt has been accepted Date: Mon, 16 Dec 2013 22:28:20 +0100 (CET) From: FOSDEM Stands Team <stands(a)fosdem.org> To: Dave Neary <dneary(a)redhat.com> Hi Dave, The FOSDEM stands team is glad to be able to inform you that your request for a stand for oVirt has been accepted. There will be one table reserved for you. You will receive further information about what's expected of you closer to the event date. Looking forward to seeing you at FOSDEM 2014! Kind regards, Wynke Stulemeijer FOSDEM stands team

5 7