December 2014 - Users - oVirt List Archives

hosted-engine --deploy fails
by Andreas Mather 07 Jan '15

07 Jan '15

Hi All! Just tried to install the hosted engine on a fresh CentOS 6.6: beside setting up a gluster cluster, I just added the repo and installed hosted-engine-setup package. Otherwise it's just a very minimal installation. hosted-engine deploy failed immediately. The issue seems to be the same as described here http://lists.ovirt.org/pipermail/users/2014-October/028461.html but that conversation didn't continue after the reporting user was asked for additional details. Failed installation: [root@vhost1 ~]# hosted-engine --deploy [ INFO ] Stage: Initializing Continuing will configure this host for serving as hypervisor and create a VM where you have to install oVirt Engine afterwards. Are you sure you want to continue? (Yes, No)[Yes]: [ INFO ] Generating a temporary VNC password. [ INFO ] Stage: Environment setup Configuration files: [] Log file: /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20141223224236-y9ttk4.log Version: otopi-1.3.0 (otopi-1.3.0-1.el6) [ INFO ] Hardware supports virtualization [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment setup [ ERROR ] Failed to execute stage 'Environment setup': Command '/sbin/service' failed to execute [ INFO ] Stage: Clean up [ INFO ] Generating answer file '/etc/ovirt-hosted-engine/answers.conf' [ INFO ] Answer file '/etc/ovirt-hosted-engine/answers.conf' has been updated [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination Packages: [root@vhost1 ~]# rpm -qa|grep hosted-engine ovirt-hosted-engine-setup-1.2.1-1.el6.noarch ovirt-hosted-engine-ha-1.2.4-1.el6.noarch [root@vhost1 ~]# rpm -qa|grep vdsm vdsm-yajsonrpc-4.16.7-1.gitdb83943.el6.noarch vdsm-python-zombiereaper-4.16.7-1.gitdb83943.el6.noarch vdsm-python-4.16.7-1.gitdb83943.el6.noarch vdsm-xmlrpc-4.16.7-1.gitdb83943.el6.noarch vdsm-4.16.7-1.gitdb83943.el6.x86_64 vdsm-cli-4.16.7-1.gitdb83943.el6.noarch vdsm-jsonrpc-4.16.7-1.gitdb83943.el6.noarch So here's the output that was requested in the other thread. Hope someone can help me here. Thanks! [root@vhost1 ~]# find /var/lib/vdsm/persistence /var/lib/vdsm/persistence [root@vhost1 ~]# find /var/run/vdsm/netconf find: `/var/run/vdsm/netconf': No such file or directory [root@vhost1 ~]# ip l 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/ether 00:25:90:d8:0a:b0 brd ff:ff:ff:ff:ff:ff 4: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 62:e5:28:13:9d:ba brd ff:ff:ff:ff:ff:ff 5: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff virsh -r net [root@vhost1 ~]# virsh -r net error: unknown command: 'net' [root@vhost1 ~]# virsh -r net-list Name State Autostart Persistent -------------------------------------------------- ;vdsmdummy; active no no [root@vhost1 ~]# vdsm-tool restore-nets Traceback (most recent call last): File "/usr/share/vdsm/vdsm-restore-net-config", line 137, in <module> restore() File "/usr/share/vdsm/vdsm-restore-net-config", line 123, in restore unified_restoration() File "/usr/share/vdsm/vdsm-restore-net-config", line 57, in unified_restoration _inRollback=True) File "/usr/share/vdsm/network/api.py", line 616, in setupNetworks netinfo._libvirtNets2vdsm(libvirt_nets))) File "/usr/lib/python2.6/site-packages/vdsm/netinfo.py", line 822, in get d['nics'][dev.name] = _nicinfo(dev, paddr, ipaddrs) File "/usr/lib/python2.6/site-packages/vdsm/netinfo.py", line 653, in _nicinfo info = _devinfo(link, ipaddrs) File "/usr/lib/python2.6/site-packages/vdsm/netinfo.py", line 681, in _devinfo ipv4addr, ipv4netmask, ipv4addrs, ipv6addrs = getIpInfo(link.name, ipaddrs) File "/usr/lib/python2.6/site-packages/vdsm/netinfo.py", line 370, in getIpInfo ipv4addr, prefix = addr['address'].split('/') ValueError: need more than 1 value to unpack Traceback (most recent call last): File "/usr/bin/vdsm-tool", line 209, in main return tool_command[cmd]["command"](*args) File "/usr/lib/python2.6/site-packages/vdsm/tool/restore_nets.py", line 36, in restore_command restore() File "/usr/lib/python2.6/site-packages/vdsm/tool/restore_nets.py", line 45, in restore raise EnvironmentError('Failed to restore the persisted networks') EnvironmentError: Failed to restore the persisted networks following is mentioned in the original thread, but should help other googlers: ovirt-hosted-engine-setup.log (first attempt): 2014-12-23 22:04:38 DEBUG otopi.plugins.otopi.services.rhel plugin.execute:861 execute-output: ('/sbin/service', 'vdsmd', 'start') stdout: Starting multipathd daemon: [ OK ] Starting rpcbind: [ OK ] Starting ntpd: [ OK ] Loading the softdog kernel module: [ OK ] Starting wdmd: [ OK ] Starting sanlock: [ OK ] supervdsm start[ OK ] Starting iscsid: [ OK ] [ OK ] vdsm: Running mkdirs vdsm: Running configure_coredump vdsm: Running configure_vdsm_logs vdsm: Running run_init_hooks vdsm: Running check_is_configured libvirt is already configured for vdsm vdsm: Running validate_configuration SUCCESS: ssl configured to true. No conflicts vdsm: Running prepare_transient_repository vdsm: Running syslog_available vdsm: Running nwfilter vdsm: Running dummybr vdsm: Running load_needed_modules vdsm: Running tune_system vdsm: Running test_space vdsm: Running test_lo vdsm: Running unified_network_persistence_upgrade vdsm: stopped during execute unified_network_persistence_upgrade task (task returned with error code 1). vdsm start[FAILED] 2014-12-23 22:04:38 DEBUG otopi.plugins.otopi.services.rhel plugin.execute:866 execute-output: ('/sbin/service', 'vdsmd', 'start') stderr: initctl: Job is already running: libvirtd libvirt: Network Filter Driver error : Network filter not found: no nwfilter with matching name 'vdsm-no-mac-spoofing' 2014-12-23 22:04:38 DEBUG otopi.context context._executeMethod:152 method exception Traceback (most recent call last): File "/usr/lib/python2.6/site-packages/otopi/context.py", line 142, in _executeMethod method['method']() File "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/system/vdsmenv.py", line 155, in _late_setup state=True File "/usr/share/otopi/plugins/otopi/services/rhel.py", line 188, in state 'start' if state else 'stop' File "/usr/share/otopi/plugins/otopi/services/rhel.py", line 96, in _executeServiceCommand raiseOnError=raiseOnError File "/usr/lib/python2.6/site-packages/otopi/plugin.py", line 871, in execute command=args[0], RuntimeError: Command '/sbin/service' failed to execute 2014-12-23 22:04:38 ERROR otopi.context context._executeMethod:161 Failed to execute stage 'Environment setup': Command '/sbin/service' failed to execute ovirt-hosted-engine-setup.log (further attempts): 2014-12-23 22:42:40 DEBUG otopi.plugins.otopi.services.rhel plugin.execute:861 execute-output: ('/sbin/service', 'vdsmd', 'start') stdout: vdsm: Running mkdirs vdsm: Running configure_coredump vdsm: Running configure_vdsm_logs vdsm: Running run_init_hooks vdsm: Running check_is_configured libvirt is already configured for vdsm vdsm: Running validate_configuration SUCCESS: ssl configured to true. No conflicts vdsm: Running prepare_transient_repository vdsm: Running syslog_available vdsm: Running nwfilter vdsm: Running dummybr vdsm: Running load_needed_modules vdsm: Running tune_system vdsm: Running test_space vdsm: Running test_lo vdsm: Running unified_network_persistence_upgrade vdsm: stopped during execute unified_network_persistence_upgrade task (task returned with error code 1). vdsm start[FAILED] 2014-12-23 22:42:40 DEBUG otopi.plugins.otopi.services.rhel plugin.execute:866 execute-output: ('/sbin/service', 'vdsmd', 'start') stderr: initctl: Job is already running: libvirtd 2014-12-23 22:42:40 DEBUG otopi.context context._executeMethod:152 method exception Traceback (most recent call last): File "/usr/lib/python2.6/site-packages/otopi/context.py", line 142, in _executeMethod method['method']() File "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/system/vdsmenv.py", line 155, in _late_setup state=True File "/usr/share/otopi/plugins/otopi/services/rhel.py", line 188, in state 'start' if state else 'stop' File "/usr/share/otopi/plugins/otopi/services/rhel.py", line 96, in _executeServiceCommand raiseOnError=raiseOnError File "/usr/lib/python2.6/site-packages/otopi/plugin.py", line 871, in execute command=args[0], RuntimeError: Command '/sbin/service' failed to execute 2014-12-23 22:42:40 ERROR otopi.context context._executeMethod:161 Failed to execute stage 'Environment setup': Command '/sbin/service' failed to execute ---- Andreas

4 6

ERROR 'no free file handlers in pool' while creating VM from template
by Tiemen Ruiten 07 Jan '15

07 Jan '15

Hello, I ran into a nasty problem today when creating a new, cloned VM from a template (one virtual 20 GBdisk) on our two-node oVirt cluster: on the node where I started a VM creation job, load skyrocketed and some VMs stopped responding until and after the job failed. Everything recovered without intervention, but this obviously shouldn't happen. I have attached the relevant vdsm log file. The button to create the VM was pressed around 11:17, the first error in the vdsm log is at 11:23:58. The ISO domain is a gluster volume exposed via NFS, the storage domain for the VM's is also a gluster volume. The underlying filesystem is ZFS. The hypervisor nodes are full CentOS 6 installs. I'm guessing the 'no free file handlers in pool' in the vdsm log file is key here. What can I do to prevent this from happening again? Apart from not creating new VMs of course :) Tiemen

3 12

Re: [ovirt-users] 3.5 live merge findings and mysteries [was Re: Simple way to activate live merge in FC20 cluster]
by Gianluca Cecchi 06 Jan '15

06 Jan '15

On Fri, Dec 12, 2014 at 4:32 PM, Itamar Heim <iheim(a)redhat.com> wrote: > > On 11/21/2014 09:53 AM, Gianluca Cecchi wrote: > >> So the official statement is this one at: >> http://www.ovirt.org/OVirt_3.5_Release_Notes >> >> Live Merge >> If an image has one or more snapshots, oVirt 3.5's merge command will >> combine the data of one volume into another. Live merges can be >> performed with data is pulled from one snapshot into another snapshot. >> The engine can merge multiple disks at the same time and each merge can >> independently fail or succeed in each operation. >> >> I think we should remove the part above, or at least have some of the >> developers to better clarify it. >> The feature in my opinion is very important and crucial for oVirt/RHEV >> because it is able to almost-fill the gap with VMware, especially in >> development environments, where having flexibility on snapshots >> management is very important and could be a starting point to have >> greater user base familiarize with the product and adopt it. >> >> So these are my findings and all combinations and none of them was able >> to provide live merge.... >> Could anyone tell me where I'm failing? Or correct release notes? >> >> 1) Environment with All-In-One F20 >> >> installing oVirt AIO on F20 automatically gives the virt-preview repo >> through the ovirt-3.5-dependencies.repo file, but only for libvirt* >> packages: >> >> the same server is the engine and the hypervisor >> >> [root@tekkaman qemu]# rpm -q libvirt >> libvirt-1.2.9.1-1.fc20.x86_64 >> >> [root@tekkaman qemu]# vdsClient -s 0 getVdsCaps | grep -i merge >> liveMerge = 'true' >> >> but >> [root@tekkaman qemu]# rpm -q qemu >> qemu-1.6.2-10.fc20.x86_64 >> >> So that tryng live merge it initially start but you get this in vdsm.log: >> libvirtError: unsupported configuration: active commit not supported >> with this QEMU binary >> >> >> 2) Another seaparate environment with a dedicated 3.5 engine f20 engine >> and 4 test cases tried >> >> a) ovirt node installed and put in a dedicated cluster >> latest available seems ovirt-node-iso-3.5.0.ovirt35.20140912.el6.iso >> from 3.5 rc test days >> >> At the end of oVirt Node install and activation in engine: >> [root@ovnode01 ~]# vdsClient -s 0 getVdsCaps | grep -i merge >> liveMerge = 'false' >> >> [root@ovnode01 ~]# rpm -qa libvirt* qemu* >> libvirt-0.10.2-29.el6_5.12.x86_64 >> libvirt-lock-sanlock-0.10.2-29.el6_5.12.x86_64 >> libvirt-python-0.10.2-29.el6_5.12.x86_64 >> qemu-kvm-tools-0.12.1.2-2.415.el6_5.14.x86_64 >> qemu-kvm-rhev-0.12.1.2-2.415.el6_5.14.x86_64 >> libvirt-client-0.10.2-29.el6_5.12.x86_64 >> qemu-img-rhev-0.12.1.2-2.415.el6_5.14.x86_64 >> >> >> >> b) f20 + latest updates host installed as OS and then installed from >> webadmin in another cluster >> virt-preview on host it is not enabled so that libvirt/qemu are not ready >> >> >> [root@ovnode02 network-scripts]# vdsClient -s 0 getVdsCaps | grep -i >> merge >> liveMerge = 'false' >> >> [root@ovnode02 network-scripts]# rpm -qa libvirt* qemu* >> libvirt-daemon-1.1.3.6-2.fc20.x86_64 >> libvirt-python-1.1.3.6-2.fc20.x86_64 >> libvirt-daemon-config-nwfilter-1.1.3.6-2.fc20.x86_64 >> qemu-kvm-1.6.2-10.fc20.x86_64 >> qemu-common-1.6.2-10.fc20.x86_64 >> libvirt-client-1.1.3.6-2.fc20.x86_64 >> libvirt-daemon-driver-network-1.1.3.6-2.fc20.x86_64 >> libvirt-daemon-driver-nwfilter-1.1.3.6-2.fc20.x86_64 >> libvirt-daemon-driver-interface-1.1.3.6-2.fc20.x86_64 >> libvirt-daemon-driver-nodedev-1.1.3.6-2.fc20.x86_64 >> libvirt-daemon-driver-secret-1.1.3.6-2.fc20.x86_64 >> qemu-system-x86-1.6.2-10.fc20.x86_64 >> libvirt-daemon-kvm-1.1.3.6-2.fc20.x86_64 >> qemu-kvm-tools-1.6.2-10.fc20.x86_64 >> qemu-img-1.6.2-10.fc20.x86_64 >> libvirt-daemon-driver-qemu-1.1.3.6-2.fc20.x86_64 >> libvirt-daemon-driver-storage-1.1.3.6-2.fc20.x86_64 >> libvirt-lock-sanlock-1.1.3.6-2.fc20.x86_64 >> >> >> >> c) CentOS 6.6 host + latest updates installed as OS and then installed >> from webadmin in another cluster >> >> [root@ovnode03 ~]# vdsClient -s 0 getVdsCaps | grep -i merge >> liveMerge = 'false' >> >> [root@ovnode03 ~]# rpm -qa libvirt* qemu* >> libvirt-python-0.10.2-46.el6_6.2.x86_64 >> qemu-kvm-rhev-tools-0.12.1.2-2.415.el6_5.14.x86_64 >> qemu-img-rhev-0.12.1.2-2.415.el6_5.14.x86_64 >> libvirt-client-0.10.2-46.el6_6.2.x86_64 >> libvirt-0.10.2-46.el6_6.2.x86_64 >> qemu-kvm-rhev-0.12.1.2-2.415.el6_5.14.x86_64 >> libvirt-lock-sanlock-0.10.2-46.el6_6.2.x86_64 >> >> >> >> d) CentOS 7.0 host + latest updates installed as OS and then installed >> from webadmin in another cluster >> >> [root@ovnode04 ~]# vdsClient -s 0 getVdsCaps | grep -i merge >> liveMerge = 'false' >> >> [root@ovnode04 ~]# rpm -qa qemu* libvirt* >> qemu-img-rhev-1.5.3-60.el7_0.2.x86_64 >> libvirt-daemon-1.1.1-29.el7_0.3.x86_64 >> libvirt-daemon-driver-storage-1.1.1-29.el7_0.3.x86_64 >> libvirt-daemon-driver-nodedev-1.1.1-29.el7_0.3.x86_64 >> libvirt-daemon-kvm-1.1.1-29.el7_0.3.x86_64 >> qemu-kvm-tools-rhev-1.5.3-60.el7_0.2.x86_64 >> qemu-kvm-common-rhev-1.5.3-60.el7_0.2.x86_64 >> libvirt-client-1.1.1-29.el7_0.3.x86_64 >> libvirt-daemon-driver-nwfilter-1.1.1-29.el7_0.3.x86_64 >> libvirt-daemon-driver-interface-1.1.1-29.el7_0.3.x86_64 >> libvirt-lock-sanlock-1.1.1-29.el7_0.3.x86_64 >> libvirt-daemon-config-nwfilter-1.1.1-29.el7_0.3.x86_64 >> libvirt-daemon-driver-network-1.1.1-29.el7_0.3.x86_64 >> qemu-kvm-rhev-1.5.3-60.el7_0.2.x86_64 >> libvirt-python-1.1.1-29.el7_0.3.x86_64 >> libvirt-daemon-driver-secret-1.1.1-29.el7_0.3.x86_64 >> libvirt-daemon-driver-qemu-1.1.1-29.el7_0.3.x86_64 >> >> >> Thanks in advance, >> Gianluca >> >> >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > was this resolved? > In my opinion it was not resolved and what written into release notes doesn't correspond to features set. See my test cases and eventually describe other test cases where live merge is usable See also other findings about live merge on active layer here: http://lists.ovirt.org/pipermail/users/2014-November/029450.html Gianluca

4 7

Debug Environment for RHEVM
by Xie, Chao 06 Jan '15

06 Jan '15

--_000_EE4D679B9474414187D2E27D8B6890F694E491G08CNEXMBPEKD03g0_ Content-Type: text/plain; charset="gb2312" Content-Transfer-Encoding: base64 SEksDQoNCkkgZm91bmQgdGhlcmUgaXMgYSBkZWJ1ZyBlbnZpcm9ubWVudCBmb3Igb1ZpcnQ6IGh0 dHA6Ly93aWtpLm92aXJ0Lm9yZy9PVmlydF9FbmdpbmVfRGV2ZWxvcG1lbnRfRW52aXJvbm1lbnQN CklzIGl0IGFsc28gdXNlZnVsIGZvciBSSEVWTSBzb3VyY2UgY29kZT8NCg0KQmVzdCBSZWdhcmRz LA0KWGllDQo= --_000_EE4D679B9474414187D2E27D8B6890F694E491G08CNEXMBPEKD03g0_ Content-Type: text/html; charset="gb2312" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dgb2312"> <meta name=3D"Generator" content=3D"Microsoft Word 14 (filtered medium)"> <style></style> </head> <body lang=3D"ZH-CN" link=3D"blue" vlink=3D"purple" style=3D"text-justify-t= rim:punctuation"> <div class=3D"WordSection1"> <p class=3D"MsoNormal"><span lang=3D"EN-US">HI, <o:p></o:p></span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US"><o:p> </o:p></span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">I found there is a debug enviro= nment for oVirt: <a href=3D"http://wiki.ovirt.org/OVirt_Engine_Development_Environment">http= ://wiki.ovirt.org/OVirt_Engine_Development_Environment</a><o:p></o:p></span= ></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">Is it also useful for RHEVM sou= rce code?<o:p></o:p></span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US"><o:p> </o:p></span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">Best Regards,<o:p></o:p></span>= </p> <p class=3D"MsoNormal"><span lang=3D"EN-US">Xie<o:p></o:p></span></p> </div> </body> </html> --_000_EE4D679B9474414187D2E27D8B6890F694E491G08CNEXMBPEKD03g0_--

3 2

templates and freeipa
by Jim Kinney 06 Jan '15

06 Jan '15

Ovirt 3.5 is running well for me and I have freeIPA controlling access to the user portal. I would like to provide templates of various linux setups that all have freeipa for user authentication in the VM for my developers to be able to create a new VM from and then log in using their freeIPA access and sudo control. I'm wanting to group developers by project and use freeIPA to set sudo commands as needed (group A get oracle, group B get postgresql, etc). Wanting to maximize developer ability while minimizing my clean up time :-) They will be able to delete VMs they create. It's possible to do a kickstart deploy with freeIPA registration but a template from that will be a problem as it will have the same keys for all VMs. Is there a post-creation scripting process I can attach to in ovirt or should I look at a default root user and script that personalizes the new VM? -- -- James P. Kinney III Every time you stop a school, you will have to build a jail. What you gain at one end you lose at the other. It's like feeding a dog on his own tail. It won't fatten the dog. - Speech 11/23/1900 Mark Twain *http://heretothereideas.blogspot.com/ <http://heretothereideas.blogspot.com/>*

3 2

Re: [ovirt-users] engine-iso-uploader unexpected behaviour (steve a)
by Steve Atkinson 05 Jan '15

05 Jan '15

On Wed, Dec 31, 2014 at 12:47 PM, Yedidyah Bar David <didi(a)redhat.com> wrote: > ----- Original Message ----- > > From: "Steve Atkinson" <satkinson(a)telvue.com> > > To: users(a)ovirt.org > > Sent: Wednesday, December 31, 2014 7:15:23 PM > > Subject: [ovirt-users] engine-iso-uploader unexpected behaviour > > > > When attempting use the engine-iso-uploader to drop ISOs in my iso > storage > > domain I get the following results. > > > > Using engine-iso-uploader --iso-domain=[domain] upload [iso] does not > work > > because the engine does not have access to our storage network. So it > > attempts to mount to an address that is not routable. I thought to > resolve > > this by adding an interfaces to the Hosted Engine, only to find that I > > cannot modify the Engine's VM config from the GUI. I receive the error: > > Cannot add Interface. This VM is not managed by the engine. Actually, I > get > > that error whenever I attempt to modify anything about the engine. Maybe > > this is expected behavior? I can't find any bestpractices regarding > Hosted > > Engine administration. > > > > Alternatively, using engine-iso-uploader --nfs-server=[path] upload [iso] > > --verbose returns the following error: > > > > ERROR: local variable 'domain_type' referenced before assignment > > INFO: Use the -h option to see usage. > > DEBUG: Configuration: > > DEBUG: command: upload > > DEBUG: Traceback (most recent call last): > > DEBUG: File "/usr/bin/engine-iso-uploader", line 1440, in <module> > > DEBUG: isoup = ISOUploader(conf) > > DEBUG: File "/usr/bin/engine-iso-uploader", line 455, in __init__ > > DEBUG: self.upload_to_storage_domain() > > DEBUG: File "/usr/bin/engine-iso-uploader", line 1089, in > > upload_to_storage_domain > > DEBUG: elif domain_type in ('localfs', ): > > DEBUG: UnboundLocalError: local variable 'domain_type' referenced before > > assignment > > Do you run it from the engine's machine? The host? Elsewhere? > Where is the iso domain? > > This sounds to me like a bug, but I didn't check the sources yet. > Please open one. Thanks. > > That said, you can simply copy your iso file directly to the correct > directory inside the iso domain, which is: > > /path-to-iso-domain/SOME-UUID/images/11111111-1111-1111-1111-111111111111/ > > Make sure it's readable to vdsm:kvm (36:36). > > Best, > -- > Didi > I'm running the command from the Engine itself, it seems to be the only box that has this command available. The ISO domain utilizes the same root share as the DATA and EXPORT domains which seem to work fine. The structure looks something like: server:/nfs-share/ovirt-store/iso-store/UUIDblahblah/images/ server:/nfs-share/ovirt-store/export-store/path/path/path server:/nfs-share/ovirt-store/data-store/UUIDblahblah/images/ Each of storage-domain was created through the Engine. Perms for each below, which persists all the way down the tree: drwxr-xr-x. 3 vdsm kvm 4 Nov 14 19:02 data-store drwxr-xr-x. 3 vdsm kvm 4 Nov 14 19:04 export-store drwxr-xr-x. 3 vdsm kvm 4 Nov 14 18:18 hosted-engine drwxr-xr-x. 3 vdsm kvm 4 Nov 14 19:04 iso-store If I attempt to mount any of them via NFS from our management network they work just fine. (moved around, read/write operations) Copied the ISO I needed directly to it and changed the perms/ownership by hand which seems to have worked as a short term solution. I can see why the --iso-domain argument has issues as it is trying to use the our storage network, which isn't routable from the Engine as it only has the one network interface. Although that does seem like an oversight. Seems like this transfer should pass through the SPM and not try to directly mount the NFS share if the --iso-domain flag is used. Thanks for the quick response.

2 7

Problem wiht ovirt-node
by rino 05 Jan '15

05 Jan '15

I installed ovirt node with hosted-engine using pre-release ovirt-node 3.5 iso. When i shutdown the ovirt-node from menu everything down ok, ( i register it as node in vm ). When i turn on the server next day, ovirt-node come up with no vm was installed ( i use other server as storage with nfs). Nfs is working fine i see all resource if i do showmount -e nfs.server. But if i try to do hosted-engine --vm-status or any command with hosted-engine it suggest me to do a new deploy, but i have all enviroment configured en my engine. I need to configure two ovirt-node, and then move it to datacenter, but after shutdown vm engine is not seen by ovirt-node. Regards -- --- Rondan Rino Certificado en LPIC-2 <https://cs.lpi.org/caf/Xamman/certification> LPI ID:LPI000209832 Verification Code:gbblvwyfxu Red Hat Certified Engineer -- RHCE -- RHCVA <https://www.redhat.com/wapps/training/certification/verify.html?certNumber=…> Blog:http://www.itrestauracion.com.ar Cv: http://cv.rinorondan.com.ar <http://www.rinorondan.com.ar/> http://counter.li.org Linux User -> #517918 Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^

4 6

Problems after upgrade ovirt 3.4 to ovirt 3.5
by andrey.dyadyura＠gmail.com 05 Jan '15

05 Jan '15

2 1

Would you add the project of Jasper into the Zanata?
by 张亚琪 05 Jan '15

05 Jan '15

hi all, Would you add Jasper into zanata? I want to translate it for reports, and this project is based on this project. So would you add it for reports? Thanks a lot. :)

3 4

Autostart vm's at host boot on local storage
by Brent Hartzell 04 Jan '15

04 Jan '15

--_CC286E1A-A3A3-481A-AB16-0EE929F3B4A9_ Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset="Windows-1252" Can this be done? We hit a road block with gluster and will be using local = storage while testing gluster. Only problem, if a host reboots, the vm's on= that host do not. Is there a way to have ovirt/libvirt start all vm's resi= ding on the local storage?= --_CC286E1A-A3A3-481A-AB16-0EE929F3B4A9_ Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset="Windows-1252" <HTML><HEAD> <META content=3D"text/html; charset=3Dwindows-1252" http-equiv=3DContent-Ty= pe></HEAD> <BODY> <DIV> <DIV style=3D"FONT-SIZE: 11pt; FONT-FAMILY: Calibri,sans-serif">Can this be= done? We hit a road block with gluster and will be using local storage whi= le testing gluster. Only problem, if a host reboots, the vm's on that host = do not. Is there a way to have ovirt/libvirt start all vm's residing on the= local storage?</DIV></DIV></BODY></HTML>= --_CC286E1A-A3A3-481A-AB16-0EE929F3B4A9_--

5 4