December 2015 - Users - oVirt List Archives

noVNC and spiceHTML5 keyboard layout
by Nathanaël Blanchet 14 Dec '15

14 Dec '15

Hi all, With 3.6 and SPICE+VNC option, display continue to work, but the keybord layout is only qwerty with novnc or spiceHTML5. With the native console, the keyboard layout is the same as expected (fr) in the edit tab. Is it a known bug? it seems that the desired layout with spiceHTML5 has never worked before, but with noVNC it was good, so it may be a regression. Thanks for your help. -- Nathanaël Blanchet Supervision réseau Pôle Infrastrutures Informatiques 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr

1 0

Migration Return Errors
by Matt Wells 14 Dec '15

14 Dec '15

We're running oVirt 3.5 in a two node setup. We've had some storage issues and getting it humming with Gluster but this seems to have all of that squared away. Our problem is peculiar and I wanted to ask the list to see if anyone else has had this. In short you can migrate a VM from one host to the other but once there it can not return to it's original host. We attempted a few things yesterday and with testing today I'll attach logs shortly. ** Environment Hosts name - Host1.example.com Host2.example.com VMs name - Server1.example.com Server2.example.com This is a hosted-enginge configuration but all seems to be working well. Even the hosted-engine shows this behavior but I'm focusing on Server 1 and 2; not the engine as I believe it complicates the tests. * Both nodes are operational with no power management setup * All VMs reside within the vm_storage mount point * At this time there is only one Network; it has the VMs and hosts. This will be broken up after this is resolved. * Server1 migrates (by hand ) from Host1 to Host2 with no issues * Server2 is powered on atop Host1 with no issues; leaving one VM on both hosts * I attempt to migrate Server1 back to Host1 and he states there is no available hypervisor * I can reboot Server2 with no issues, create a new VM on Host1 * A VM can only migrate onces, never able to return from whence it came The only way to force this is to place Host1 in maintenance mode and activate again. After this Server2 can return to Host1 but then is unable to go back to Server2; being in the same cycle

2 1

How To: Node Hosted-Engine with less then 16GB
by Alain Gilmor 14 Dec '15

14 Dec '15

--_000_3217552491024477ba9926bdf0e12f11GEEEX01globaleagleentco_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Here's a short guide for people having trouble setting up Hosted-Engine usi= ng only Ovirt Nodes. Anything to do with ' jenkins' OVA did not work for = me, size mismatch, etc. Anytime I tried to deploy the Hosted-Engine via the Node TUI, I was not pro= mpted to adjust the amount of RAM the Hosted-Engine VM takes. (default 16G= B). After the deploy setup, the Hosted-Engine VM would not boot. When using a regular Ovirt host to deploy the Hosted-Engine, I was prompted= to adjust the RAM for the Hosted Engine! Solution : Install ovirt-engine RPMs on "host1". Install ovirt-hosted-engine-appliance RPM. Copy its OVA from /usr/share/ovi= rt-engine-appliance/ to your webserver Run hosted-engine -deploy from "host1". Adjust the RAM to 4096. Run the Hosted-Engine deploy from Node. Let it SCP the config from "host1" Reboot Host1 as make it another Node. --_000_3217552491024477ba9926bdf0e12f11GEEEX01globaleagleentco_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"FR-CA" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> Here’s a short guide for = people having trouble setting up Hosted-Engine using only Ovirt Nodes.   Anything to do with ‘ jenkins&#8= 217; OVA did not work for me, size mismatch, etc.<o:p></o:p> Anytime I tried to deploy the Hosted-Engine via the Node TUI, I was not<= /i> prompted to adjust the amount of RAM the Hosted-Engine VM takes.  = (default 16GB).   After the deploy setup, the Hosted-Engine VM wo= uld not boot.  <o:p></o:p> When using a regular Ovirt host= to deploy the Hosted-Engine, I was prompted to adjust the RAM for the Hosted Engine!<o:p></o:p>= <o:p> </o:p> Solution  :<o:p></o:p></sp= an> Install ovirt-engine RPMs on &#= 8220;host1”.<o:p></o:p> Install ovirt-hosted-engine-app= liance RPM. Copy its OVA from /usr/share/ovirt-engine-appliance/  to y= our webserver<o:p></o:p> Run hosted-engine –deploy= from “host1”.  Adjust the RAM to 4096. Run the Hosted-Engine deploy from Node.  Let it SCP the config from &#= 8220;host1”<o:p></o:p> Reboot Host1 as make it another= Node.<o:p></o:p> <o:p> </o:p> <o:p> </o:p> </div> </body> </html> --_000_3217552491024477ba9926bdf0e12f11GEEEX01globaleagleentco_--

2 3

hosted-engine --deploy using vmfex, not bridged mode ?
by David LeVene 14 Dec '15

14 Dec '15

--_000_BLUPR0301MB19712419B3AC58A8EF53D15FE9ED0BLUPR0301MB1971_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi All, I'm starting to review/test ovirt to see if its suitable to use in our orga= nisation. I'm following some guides but I'm having trouble with the hosted-= engine --deploy section. I want to use VM-FEX to setup this initial host, as when I go bridged mode = it breaks the networking on the host and I am unable to configure/correctly= setup everything. Is there a way I can perform the hosted-engine setup using this method of t= elling it to use a vm-fex defined network pool? I might need to configure t= his myself before running hosted-engine deploy.. which is fine but I can't = touch or edit the virsh settings as there's a password - and I'm not sure h= ow to get that to modify the networking myself after the initial setup. FYI - this is the guide I'm following, as we are interested in the gluster = replication (http://community.redhat.com/blog/2014/10/up-and-running-with-o= virt-3-5/) Any suggestions/tips would be appreciated. Regards David This email and any attachments may contain confidential and proprietary inf= ormation of Blackboard that is for the sole use of the intended recipient. = If you are not the intended recipient, disclosure, copying, re-distribution= or other use of any of this information is strictly prohibited. Please imm= ediately notify the sender and delete this transmission if you received thi= s email in error. --_000_BLUPR0301MB19712419B3AC58A8EF53D15FE9ED0BLUPR0301MB1971_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"EN-AU" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> Hi All,<o:p></o:p> <o:p> </o:p> I’m starting to review/test ovirt to see if it= s suitable to use in our organisation. I’m following some guides but = I’m having trouble with the hosted-engine --deploy section.<o:p></o:p= > <o:p> </o:p> I want to use VM-FEX to setup this initial host, as = when I go bridged mode it breaks the networking on the host and I am unable= to configure/correctly setup everything.<o:p></o:p> <o:p> </o:p> Is there a way I can perform the hosted-engine setup= using this method of telling it to use a vm-fex defined network pool? I mi= ght need to configure this myself before running hosted-engine deploy.. whi= ch is fine but I can’t touch or edit the virsh settings as there’s a password - and I’m not sure ho= w to get that to modify the networking myself after the initial setup.<o:p>= </o:p> <o:p> </o:p> FYI - this is the guide I’m following, as we a= re interested in the gluster replication (http://community.redhat.com/blog/= 2014/10/up-and-running-with-ovirt-3-5/)<o:p></o:p> <o:p> </o:p> Any suggestions/tips would be appreciated.<o:p></o:p= > <o:p> </o:p> Regards<o:p></o:p> David<o:p></o:p> </div> This email and any attachments may contain confidential and proprietary inf= ormation of Blackboard that is for the sole use of the intended recipient. = If you are not the intended recipient, disclosure, copying, re-distribution= or other use of any of this information is strictly prohibited. Please immediately notify the sender and delete th= is transmission if you received this email in error. </body> </html> --_000_BLUPR0301MB19712419B3AC58A8EF53D15FE9ED0BLUPR0301MB1971_--

2 1

oVirt 3.6 and CentOS 7
by ovirt＠timmi.org 13 Dec '15

13 Dec '15

Hi oVirt users, since a couple of days I'm struggling to install oVirt 3.6 on a CentOS 7 server. Here are the steps I have done to get oVirt 3.6 engine on the host. 1. Install minimal CentOS 2. update to latest version (yum update) 3. install oVirt 3.6 (yum install ovirt-engine) 4. start rpcbind (systemctl start rpcbind) 5. run engine-setup --== CONFIGURATION PREVIEW ==-- Application mode : both Default SAN wipe after delete : False Firewall manager : firewalld Update Firewall : True Host FQDN : hostname.localdomain Engine database secured connection : False Engine database host : localhost Engine database user name : engine Engine database name : engine Engine database port : 5432 Engine database host name validation : False Engine installation : True NFS setup : True PKI organization : Me NFS export ACL : 192.168.1.0/24(rw) NFS mount point : /home/iso Configure local Engine database : True Set application as default page : True Configure Apache SSL : True Configure VMConsole Proxy : True Engine Host FQDN : hostname.localdomain Configure WebSocket Proxy : True After the successful installation of the engine I logged into the admin portal to add the host to the data center. Here I entered in the following issue: Adding the host never was successful. I found out that the firewalld was always stopped and disabled during that process. A manual start of the firewalld was allowing me to continue. After that I was able to add the storage to the server. Now I thought I will be able to install a VM into the host but it looks like that something else is missing. I have no options in the drop-down boxes of cluster, templates and OS. Is anyone able to help me here? Please note that this is my first oVirt installation. Best regards and thx Christoph

3 5

vdsm command failed connection reset by peer
by alireza sadeh seighalan 12 Dec '15

12 Dec '15

hi everyone today i saw an error in events tab of ovirt3.6. it shows me this error: VDSM HV07 command failed connection reset by peer my vdsm and libvirt services status is: [root@hv07 ~]# systemctl status vdsmd vdsmd.service - Virtual Desktop Server Manager Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled) Active: active (running) since Thu 2015-12-10 17:28:10 IRST; 2 days ago Process: 17321 ExecStopPost=/usr/libexec/vdsm/vdsmd_init_common.sh --post-stop (code=exited, status=0/SUCCESS) Process: 17324 ExecStartPre=/usr/libexec/vdsm/vdsmd_init_common.sh --pre-start (code=exited, status=0/SUCCESS) Main PID: 17417 (vdsm) CGroup: /system.slice/vdsmd.service ├─ 2407 /usr/libexec/ioprocess --read-pipe-fd 151 --write-pipe-fd 147 --max-threads 10 --max-queued-requests 10 ├─ 4072 /usr/libexec/ioprocess --read-pipe-fd 159 --write-pipe-fd 156 --max-threads 10 --max-queued-requests 10 ├─ 4190 /usr/libexec/ioprocess --read-pipe-fd 183 --write-pipe-fd 180 --max-threads 10 --max-queued-requests 10 ├─ 4212 /usr/libexec/ioprocess --read-pipe-fd 153 --write-pipe-fd 150 --max-threads 10 --max-queued-requests 10 ├─ 4234 /usr/libexec/ioprocess --read-pipe-fd 49 --write-pipe-fd 46 --max-threads 10 --max-queued-requests 10 ├─14269 /usr/libexec/ioprocess --read-pipe-fd 35 --write-pipe-fd 34 --max-threads 10 --max-queued-requests 10 ├─14280 /usr/libexec/ioprocess --read-pipe-fd 48 --write-pipe-fd 45 --max-threads 10 --max-queued-requests 10 ├─14289 /usr/libexec/ioprocess --read-pipe-fd 56 --write-pipe-fd 55 --max-threads 10 --max-queued-requests 10 ├─14296 /usr/libexec/ioprocess --read-pipe-fd 65 --write-pipe-fd 64 --max-threads 10 --max-queued-requests 10 ├─14303 /usr/libexec/ioprocess --read-pipe-fd 73 --write-pipe-fd 72 --max-threads 10 --max-queued-requests 10 ├─14310 /usr/libexec/ioprocess --read-pipe-fd 82 --write-pipe-fd 80 --max-threads 10 --max-queued-requests 10 ├─14317 /usr/libexec/ioprocess --read-pipe-fd 90 --write-pipe-fd 89 --max-threads 10 --max-queued-requests 10 ├─14324 /usr/libexec/ioprocess --read-pipe-fd 97 --write-pipe-fd 96 --max-threads 10 --max-queued-requests 10 ├─14331 /usr/libexec/ioprocess --read-pipe-fd 105 --write-pipe-fd 104 --max-threads 10 --max-queued-requests 10 ├─14338 /usr/libexec/ioprocess --read-pipe-fd 117 --write-pipe-fd 113 --max-threads 10 --max-queued-requests 10 ├─17417 /usr/bin/python /usr/share/vdsm/vdsm ├─17692 /usr/libexec/ioprocess --read-pipe-fd 131 --write-pipe-fd 130 --max-threads 10 --max-queued-requests 10 ├─21151 /usr/libexec/ioprocess --read-pipe-fd 126 --write-pipe-fd 124 --max-threads 10 --max-queued-requests 10 ├─21215 /usr/libexec/ioprocess --read-pipe-fd 140 --write-pipe-fd 139 --max-threads 10 --max-queued-requests 10 ├─21446 /usr/libexec/ioprocess --read-pipe-fd 170 --write-pipe-fd 169 --max-threads 10 --max-queued-requests 10 └─21511 /usr/libexec/ioprocess --read-pipe-fd 178 --write-pipe-fd 177 --max-threads 10 --max-queued-requests 10 Dec 11 16:53:50 hv07.election.local vdsm[17417]: vdsm IOProcess WARNING (589) Request queue full Dec 11 16:53:50 hv07.election.local vdsm[17417]: vdsm IOProcess WARNING (589) Request queue full Dec 11 16:53:50 hv07.election.local vdsm[17417]: vdsm IOProcess WARNING (590) Request queue full Dec 11 16:53:50 hv07.election.local vdsm[17417]: vdsm IOProcess WARNING (590) Request queue full Dec 11 16:53:57 hv07.election.local vdsm[17417]: vdsm IOProcess WARNING (591) Request queue full Dec 11 16:53:57 hv07.election.local vdsm[17417]: vdsm IOProcess WARNING (591) Request queue full Dec 11 16:54:00 hv07.election.local vdsm[17417]: vdsm IOProcess WARNING (592) Request queue full Dec 11 16:54:00 hv07.election.local vdsm[17417]: vdsm IOProcess WARNING (592) Request queue full Dec 11 16:54:07 hv07.election.local vdsm[17417]: vdsm IOProcess WARNING (593) Request queue full Dec 11 16:54:10 hv07.election.local vdsm[17417]: vdsm IOProcess WARNING (594) Request queue full [root@hv07 ~]# systemctl status libvirtd libvirtd.service - Virtualization daemon Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled) Drop-In: /etc/systemd/system/libvirtd.service.d └─unlimited-core.conf Active: active (running) since Tue 2015-12-01 09:11:30 IRST; 1 weeks 4 days ago Docs: man:libvirtd(8) http://libvirt.org Main PID: 4523 (libvirtd) CGroup: /system.slice/libvirtd.service └─4523 /usr/sbin/libvirtd --listen Dec 01 09:11:29 hv07.election.local libvirtd[4523]: libvirt version: 1.2.8, package: 16.el7_1.5 (CentOS BuildSystem <http....org) Dec 01 09:11:29 hv07.election.local libvirtd[4523]: Module /usr/lib64/libvirt/connection-driver/libvirt_driver_lxc.so not...sible Dec 01 09:11:30 hv07.election.local systemd[1]: Started Virtualization daemon. Dec 01 09:39:59 hv07.election.local libvirtd[4523]: End of file while reading data: Input/output error Dec 10 17:28:09 hv07.election.local libvirtd[4523]: End of file while reading data: Input/output error Dec 10 17:28:09 hv07.election.local libvirtd[4523]: End of file while reading data: Input/output error Hint: Some lines were ellipsized, use -l to show in full. what should i do? thanks in advance

2 1

[Rest API / Python SDK] Setting VM Video Type
by Ollie Armstrong 11 Dec '15

11 Dec '15

Hi everyone, I'm looking for a method of settings the VM's video type to QXL from the Python SDK, which doesn't appear to be possible in any way. Whenever I set the graphics protocol to VNC it defaults the video type to CIRRUS. I'd like to use QXL with VNC, which is possible to set using the console's web UI. Has anyone achieved this before? Using the "SPICE + VNC" option with QXL would also be acceptable, but the API doesn't seem to accept that value for the graphics protocol. Cheers, Ollie

2 3

[ANN] oVirt 3.6.1 Fourth Release Candidate is now available for testing
by Sandro Bonazzola 11 Dec '15

11 Dec '15

The oVirt Project is pleased to announce the availability of the Fourth Release Candidate of oVirt 3.6.1 for testing, as of December 10th, 2015. This release is available now for Fedora 22, Red Hat Enterprise Linux 6.7, CentOS Linux 6.7 (or similar) and Red Hat Enterprise Linux >= 7.1, CentOS Linux >= 7.1 (or similar). This release supports Hypervisor Hosts running Red Hat Enterprise Linux >= 7.1, CentOS Linux >= 7.1 (or similar) and Fedora 22. Highly experimental support for Debian 8.2 Jessie has been added too. This release candidate includes updated packages for: - ovirt-engine - ovirt-engine-extension-aaa-ldap This release of oVirt 3.6.1 includes numerous bug fixes. See the release notes [1] for an initial list of the new features and bugs fixed. Please refer to release notes [1] for Installation / Upgrade instructions. A new oVirt Live ISO will be available soon[2]. Please note that mirrors[3] may need usually one day before being synchronized. Please refer to the release notes for known issues in this release. [1] http://www.ovirt.org/OVirt_3.6.1_Release_Notes [2] http://resources.ovirt.org/pub/ovirt-3.6-pre/iso/ [3] http://www.ovirt.org/Repository_mirrors#Current_mirrors -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

3 3

VM migration fails when hardware node fails
by Bill James 11 Dec '15

11 Dec '15

We are testing our new ovirt installation. We notice that if I shutdown a hardware node that the VM's do not migrate off and don't start up after the node is restarted. Its a 3 node cluster with the ovirt-engine on a 4th host. centos 7.1.1503 ovirt-engine-3.6.0.3-1.el7.centos.noarch glusterfs-3.7.5-1.el7.x86_64 High Availability box is checked, Priority = High. 2015-12-10 11:43:34,251 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-8-thread-42) [5f8883ec] Correlation ID: 5d94dbf7, Job ID: 83159d5a-0ab9-4f1b-afbc-e5c2fcbb6e04, Call Stack: null, Custom Event ID: -1, Message: Failed to migrate VM billjov2.test.j2noc.com to Host ovirt3.test.j2noc.com . Trying to migrate to another Host. ... 2015-12-10 11:43:49,137 INFO [org.ovirt.engine.core.vdsbroker.VmAnalyzer] (DefaultQuartzScheduler_Worker-87) [5f8883ec] VM 'f67a4f38-bb4b-460f-81ea-10ecae60edcc'(billjov2.test.j2noc.com) moved from 'MigratingFrom' --> 'Up' 2015-12-10 11:43:49,518 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-8-thread-4) [5f8883ec] Correlation ID: 5d94dbf7, Job ID: 83159d5a-0ab9-4f1b-afbc-e5c2fcbb6e04, Call Stack: null, Custom Event ID: -1, Message: Failed to migrate VM billjov2.test.j2noc.com to Host ovirt1.test.j2noc.com . Trying to migrate to another Host. Migrating live works just fine. I haven't found anywhere where it says why it failed when node is down. Any ideas on why it is failing? And why VM's don't start when node is up? Cloud Services for Business www.j2.com j2 | eFax | eVoice | FuseMail | Campaigner | KeepItSafe | Onebox This email, its contents and attachments contain information from j2 Global, Inc. and/or its affiliates which may be privileged, confidential or otherwise protected from disclosure. The information is intended to be for the addressee(s) only. If you are not an addressee, any disclosure, copy, distribution, or use of the contents of this message is prohibited. If you have received this email in error please notify the sender by reply e-mail and delete the original message and any copies. (c) 2015 j2 Global, Inc. All rights reserved. eFax, eVoice, Campaigner, FuseMail, KeepItSafe, and Onebox are registered trademarks of j2 Global, Inc. and its affiliates.

1 0

oVirt 4.0 wishlist: progress bar in the WebUI
by Kevin COUSIN 10 Dec '15

10 Dec '15

Hi list, It could be great if we can follow process like moving Disk storage, snapshots or VM import in the oVirt Interface, like in VMware or VMM. Regards, Kevin C

4 3