January 2019 - Users - oVirt List Archives

Replacing Export Domain by Data Domain
by tehnic＠take3.ro 03 Jan '19

03 Jan '19

Hello all, because using an export domain is deprecated i deleted my export domain and use now a data domain instead. I used the export domain for complete image backups of my production virtual machines. By using now a data domain its even more comfortable because i can clone a snapshot directly on my backup data domain. But there is a (small?) inconvenience: I cannot "unregister" the cloned snapshot and i dont want to see them all the time in the "Virtual Machines" list. For the moment i use a bookmark in the "Vms:" filter. After detaching the domain the VMs are away, reattaching brings them back for possible "Import VM". Is there a possibility to set the cloned VM directly to this "unregistered" state without detaching and reattaching the complete domain? Best regards, Robert

1 0

Information about un-imported VMs. Delete Request.
by Jacob Green 03 Jan '19

03 Jan '19

I have a Fiber Channel domain, it works, there are some VMs in the VM import tab of the domain that I want to remove, I cannot import them, because they technically already exsist with a duplicate VMID. Is there a way to do this? Alternatively if I cannot delete the data related the the imports, I want to remove the disks attached to these un-imported VM's to free up space on my Fiber Channel, is there a way to reliably identify which LVM id's belong to those un-imported VMs? Thank you. -- Jacob Green Systems Admin American Alloy Steel 713-300-5690

1 0

Re: Problem with SAN FC and Ovirt 4.2
by Arsène Gschwind 03 Jan '19

03 Jan '19

could you share the output of both command? On Thu, 2019-01-03 at 07:02 -0300, Sebastian Antunez N. wrote: Hello I see with multipath -ll and lsbls but not show the LUN Regards Sebas El jue., 3 ene. 2019 a las 3:57, Arsène Gschwind (<arsene.gschwind(a)unibas.ch<mailto:arsene.gschwind@unibas.ch>>) escribió: Hi, Do you see the LUNs on the Hypervisor using lsblk or multipath -ll ? rgds, Arsene On Wed, 2019-01-02 at 18:25 +0000, Sebastian Antunez N. wrote: Hello Guys I install 6 host with Ovirt 4.2 connected via FC to Brocade 300 switch and HP EVA P2000 Storage. Zoning was performed on each SAN switch and when creating a Virtual Disk with 3 LUN, but adding the Storage in OVIRT does not see any LUN. The OVIRT nodes were restarted, the Engine but still does not see the LUNs I have searched for information on how to resolve this issue but I have not had any information. I will appreciate your help in this regard as I have not been able to resolve the issue. Thanks to all Regards Sebastian _______________________________________________ Users mailing list -- <mailto:users@ovirt.org> users(a)ovirt.org To unsubscribe send an email to <mailto:users-leave@ovirt.org> users-leave(a)ovirt.org Privacy Statement: <https://www.ovirt.org/site/privacy-policy/> https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: <https://www.ovirt.org/community/about/community-guidelines/> https://www.ovirt.org/community/about/community-guidelines/ List Archives: <https://lists.ovirt.org/archives/list/users@ovirt.org/message/UPILMALCBD5GW…> https://lists.ovirt.org/archives/list/users@ovirt.org/message/UPILMALCBD5GW…

1 0

oVirt Node 4.2.5.1 vm stuck on "Powering Down"
by maoz zadok 03 Jan '19

03 Jan '19

Hello, vm stuck (on two hosts) I have MySQL VM guest that was stuck in a way that "kill -9" to the MySQL server pid did nothing. from the shell I execute "init 0", this did not shut down the VM. from the ovirt-engine I'm trying to power off the machine, and it is not doing anything. the event shows: > VDSM kvm5 command DestroyVDS failed: Virtual machine destroy error > and: > Failed to power off VM mysql-production (Host: kvm5, User: > admin@internal-authz). > Note, when I list the VM s on the hosts view, I see that that same VM is on two hosts (kvm7 and kvm5). It looks like the VM is stuck on two hosts, in the status "Powering Down" any ideas? Thank you

2 4

GlusterFS Storage - Size limited at 2 GB
by v.levet＠isiline.net 03 Jan '19

03 Jan '19

Hello everyone, I've installed oVirt on 8 nodes of a MacroServer (SuperMicro Microcloud): 7 Nodes with oVirt Node installed and 1 Node with Centos 7 and oVirt installed. The last one works like hypervisor and node. I would use all the storage of all nodes like a Gluster storage, so I've created a new DataCenter, with a Cluster with all nodes inside. Then I've created the volume Gluster (by GUI): Replicated Duplicated version and 4 replicas on all 8 nodes. Than "Optimize for oVirt Storage". For last I've created Domain storage based on volume created before. All works fine but the total storage that is available from Domain is 1.9 GB. I've tried already to force it using these commands: gluster volume GlusterVol limit-usage / 3200GB gluster volume quota GlusterVol limit-usage /data 3200GB At first it seems work but finally when I was installing a VM, I get Full Storage. It seems that it could use only the storage of the node where is instantiated the volume. I would see all the storage distributed and I wish I could use the storage from all nodes. Someone could help me?

2 4

Vm console direct connection
by Leo David 03 Jan '19

03 Jan '19

Hello everyone, Could someone be so kind to tell me if there's any chance that virt-viewer or any other client can be used to directly connect to vms running on oVirt without the need for the user to access the portal first ? Thank you very much ! Cheers, Leo

5 7

Problem with SAN FC and Ovirt 4.2
by Sebastian Antunez N. 03 Jan '19

03 Jan '19

Hello Guys I install 6 host with Ovirt 4.2 connected via FC to Brocade 300 switch and HP EVA P2000 Storage. Zoning was performed on each SAN switch and when creating a Virtual Disk with 3 LUN, but adding the Storage in OVIRT does not see any LUN. The OVIRT nodes were restarted, the Engine but still does not see the LUNs I have searched for information on how to resolve this issue but I have not had any information. I will appreciate your help in this regard as I have not been able to resolve the issue. Thanks to all Regards Sebastian

2 1

New install -- Error
by K Anand 03 Jan '19

03 Jan '19

Hi, I am trying to install a fresh hosted engine setup on FC. I have done a fresh install of Centos 7 minimal. Then I ran the hosted-engine --deploy....I got the following error : 2019-01-02 20:18:37,029+0530 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:100 TASK [Check for the local bootstrap VM] 2019-01-02 20:18:39,535+0530 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:100 ok: [localhost] 2019-01-02 20:18:40,838+0530 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:100 TASK [Make the engine aware that the external VM is stopped] 2019-01-02 20:18:42,943+0530 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:94 {u'_ansible_parsed': True, u'deprecations': [{u'msg': u"The 'ovirt_vms' module is being renamed 'ovirt_vm'", u'version': 2.8}], u'_ansible_no_log': False, u'changed': False, u'invocation': {u'module_args': {u'comment': None, u'affinity_label_mappings': [], u'soundcard_enabled': None, u'cpu_pinning': None, u'force': False, u'cloud_init_nics': [], u'placement_policy': None, u'boot_menu': None, u'xen': None, u'custom_compatibility_version': None, u'template_version': None, u'cluster': None, u'fetch_nested': False, u'io_threads': None, u'timezone': None, u'watchdog': None, u'memory_max': None, u'id': u'4906279b-9721-40e2-a6ac-7774ab6fd643', u'cpu_sockets': None, u'high_availability': None, u'storage_domain': None, u'domain_mappings': [], u'high_availability_priority': None, u'nics': [], u'custom_properties': None, u'disk_format': u'cow', u'sysprep': None, u'cpu_cores': None, u'ballooning_enabled': None, u'cpu_mode': None, u'state': u'stopped', u'memory_guaranteed': None, u'vmware': None, u'template': None, u'memory': None, u'cd_iso': None, u'clone_permissions': False, u'type': None, u'initrd_path': None, u'smartcard_enabled': None, u'lease': None, u'rng_device': None, u'vnic_profile_mappings': [], u'stateless': None, u'lun_mappings': [], u'clone': False, u'kvm': None, u'boot_devices': None, u'nested_attributes': [], u'usb_support': None, u'reassign_bad_macs': None, u'sso': None, u'role_mappings': [], u'serial_policy': None, u'cpu_threads': None, u'quota_id': None, u'numa_nodes': [], u'ticket': None, u'delete_protected': None, u'cloud_init_persist': False, u'wait': True, u'use_latest_template_version': None, u'affinity_group_mappings': [], u'operating_system': None, u'serial_policy_value': None, u'name': None, u'kernel_path': None, u'cloud_init': None, u'disks': [], u'poll_interval': 3, u'host': None, u'numa_tune_mode': None, u'instance_type': None, u'host_devices': None, u'graphical_console': None, u'timeout': 180, u'description': None, u'cluster_mappings': [], u'kernel_params': None, u'serial_console': None, u'allow_partial_import': None, u'cpu_shares': None}}, u'msg': u"Not possible to control VM, if it's in 'unknown' status"} 2019-01-02 20:18:43,043+0530 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:94 ignored: [localhost]: FAILED! => {"changed": false, "deprecations": [{"msg": "The 'ovirt_vms' module is being renamed 'ovirt_vm'", "version": 2.8}], "msg": "Not possible to control VM, if it's in 'unknown' status"} 2019-01-02 20:18:44,146+0530 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:94 TASK [debug] Any clues ? -- Regards K Anand ======================================== This Message has been scanned by SAIL CMO MAIL SECURITY ========================================

1 2

Network Cabling Company
by vanterus＠externetworks.com 02 Jan '19

02 Jan '19

Network Cabling Services by ExterNetworks offers Cat 5e plenum cable installation for upto 150 ft. and 300 ft. The cabling is to be done on the same floor, and no drilling and coring are required. The technicians are highly-qualified and provide best-in-class customer service experience. ExterNetworks sets the industry standards for seamless and reliable network cabling solutions for various projects. As a leader in Managed IT Services, we ensure that all of your structured cabling, network wiring, and network cabling installation will meet your project requirements with an on-going commitment to top-notch services & customer satisfaction. https://www.extnoc.com/storefront/network-cabling-company/

1 0

Acquire an XML dump of a VM oVirt?
by Jacob Green 02 Jan '19

02 Jan '19

How does one get an XML dump of a VM from ovirt? I have seen ovirt do it in the engine.log, but not sure how to force it to generate one when I need it. Thank you. -- Jacob Green Systems Admin American Alloy Steel 713-300-5690

3 4