November 2019 - Users - oVirt List Archives

Warning: out of sync hosts ovirt-node3 ?
by wangyu13476969128＠126.com 14 Nov '19

14 Nov '19

In the ovirt-engine web interface, compute-->clusters, there is a cluster with the following information: Warning: out of sync hosts ovirt-node3 ? What is the cause ? How can I solve this problem ?

1 0

engine manager VM not launching
by bepassionatenow＠gmail.com 14 Nov '19

14 Nov '19

Good evening/morning, I can't launch the Engine Manager after the initial install through Cockpit. It initially started fine but I could never login. Cockpit showed that the VM was not set to auto-restart. I don't see how to change that and the button to "run" won't work. Spinning box in the top right corner is causing issues (won't register properly). Any help would be greatly appreciated. Thanks! Daniel

1 0

Windows Server 2019 crash dxgkrnl.sys
by gregor 13 Nov '19

13 Nov '19

Hello, during the Installation of Windows Server 2019 after the first reboot the VM crashed and inside the ntbtlog.txt I found that dxgkrnl.sys can not be loaded. Environment: oVirt 4.3.6.7-1.el7 CPU: Intel-Westmere Memory: 4096MB Operation System VM config: Windows 2019 x64 HDD: VirtIO-SCSI VirtIO driver: virtio-win-0.1.171_servers_amd64.vfd Does anybody has an hint how to solve this problem and use Windows Server 2019? Besides: It's possible to install and use Windows Server 2019 in VirtualBox 6.*. We have to install it in the meantime there to have a alternative solution because it took now about two days to find a solution. We tried different settings for VGA and drivers IDE ... and many more. best regards gregor

2 1

oVirt change IP's & add new ISO share
by Jonathan Mathews 13 Nov '19

13 Nov '19

Good Day I have to change the IP addresses of the oVirt Engine, hosts and storage to a new IP range. Please, can you advise the best way to do this and if there is anything I would need to change in the database? I have also run into an issue where someone has removed the ISO share/data on the storage, so I am unable to remove, activate, detach or even add a new ISO share. Please, can you advise the best wat to resolve this? Please see the below engine logs: 2019-10-30 11:39:13,918 ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.DetachStorageDomainVDSCommand] (org.ovirt.thread.pool-8-thread-27) [58f6cfb8] Failed in 'DetachStorageDomainVDS' method 2019-10-30 11:39:13,942 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-8-thread-27) [58f6cfb8] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VDSM command failed: Storage domain does not exist: (u'42b7d819-ce3a-4a18-a683-f4817c4bdb06',) 2019-10-30 11:39:13,943 ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand] (org.ovirt.thread.pool-8-thread-27) [58f6cfb8] IrsBroker::Failed::DetachStorageDomainVDS: IRSGenericException: IRSErrorException: Failed to DetachStorageDomainVDS, error = Storage domain does not exist: (u'42b7d819-ce3a-4a18-a683-f4817c4bdb06',), code = 358 2019-10-30 11:39:13,951 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.DetachStorageDomainVDSCommand] (org.ovirt.thread.pool-8-thread-27) [58f6cfb8] FINISH, DetachStorageDomainVDSCommand, log id: 5547e2df 2019-10-30 11:39:13,951 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMGetAllTasksInfoVDSCommand] (org.ovirt.thread.pool-8-thread-38) [58f6cfb8] -- executeIrsBrokerCommand: Attempting on storage pool '5849b030-626e-47cb-ad90-3ce782d831b3' 2019-10-30 11:39:13,951 ERROR [org.ovirt.engine.core.bll.storage.DetachStorageDomainFromPoolCommand] (org.ovirt.thread.pool-8-thread-27) [58f6cfb8] Command 'org.ovirt.engine.core.bll.storage.DetachStorageDomainFromPoolCommand' failed: EngineException: org.ovirt.engine.core.vdsbroker.irsbroker.IRSErrorException: IRSGenericException: IRSErrorException: Failed to DetachStorageDomainVDS, error = Storage domain does not exist: (u'42b7d819-ce3a-4a18-a683-f4817c4bdb06',), code = 358 (Failed with error StorageDomainDoesNotExist and code 358) 2019-10-30 11:39:13,952 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMGetAllTasksInfoVDSCommand] (org.ovirt.thread.pool-8-thread-38) [58f6cfb8] START, HSMGetAllTasksInfoVDSCommand(HostName = host01, VdsIdVDSCommandParametersBase:{runAsync='true', hostId='291a3a19-7467-4783-a6f7-2b2dd0de9ad3'}), log id: 6cc238fb 2019-10-30 11:39:13,952 INFO [org.ovirt.engine.core.bll.storage.DetachStorageDomainFromPoolCommand] (org.ovirt.thread.pool-8-thread-27) [58f6cfb8] Command [id=cec030b7-4a62-43a2-9ae8-de56a5d71ef8]: Compensating CHANGED_STATUS_ONLY of org.ovirt.engine.core.common.businessentities.StoragePoolIsoMap; snapshot: EntityStatusSnapshot:{id='StoragePoolIsoMapId:{storagePoolId='5849b030-626e-47cb-ad90-3ce782d831b3', storageId='42b7d819-ce3a-4a18-a683-f4817c4bdb06'}', status='Inactive'}. 2019-10-30 11:39:13,975 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-8-thread-27) [58f6cfb8] Correlation ID: 28ac658, Job ID: b31e0f44-2d82-47bf-90d9-f69e399d994f, Call Stack: null, Custom Event ID: -1, Message: Failed to detach Storage Domain iso to Data Center Default. (User: admin@internal) 2019-10-30 11:42:46,711 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMGetAllTasksInfoVDSCommand] (org.ovirt.thread.pool-8-thread-25) [31e89bba] START, SPMGetAllTasksInfoVDSCommand( IrsBaseVDSCommandParameters:{runAsync='true', storagePoolId='5849b030-626e-47cb-ad90-3ce782d831b3', ignoreFailoverLimit='false'}), log id: 59192768 2019-10-30 11:42:48,825 ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.ActivateStorageDomainVDSCommand] (org.ovirt.thread.pool-8-thread-34) [31e89bba] Failed in 'ActivateStorageDomainVDS' method 2019-10-30 11:42:48,855 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-8-thread-34) [31e89bba] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VDSM command failed: Storage domain does not exist: (u'42b7d819-ce3a-4a18-a683-f4817c4bdb06',) 2019-10-30 11:42:48,856 ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand] (org.ovirt.thread.pool-8-thread-34) [31e89bba] IrsBroker::Failed::ActivateStorageDomainVDS: IRSGenericException: IRSErrorException: Failed to ActivateStorageDomainVDS, error = Storage domain does not exist: (u'42b7d819-ce3a-4a18-a683-f4817c4bdb06',), code = 358 2019-10-30 11:42:48,864 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.ActivateStorageDomainVDSCommand] (org.ovirt.thread.pool-8-thread-34) [31e89bba] FINISH, ActivateStorageDomainVDSCommand, log id: 518fdcf 2019-10-30 11:42:48,865 ERROR [org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand] (org.ovirt.thread.pool-8-thread-34) [31e89bba] Command 'org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand' failed: EngineException: org.ovirt.engine.core.vdsbroker.irsbroker.IRSErrorException: IRSGenericException: IRSErrorException: Failed to ActivateStorageDomainVDS, error = Storage domain does not exist: (u'42b7d819-ce3a-4a18-a683-f4817c4bdb06',), code = 358 (Failed with error StorageDomainDoesNotExist and code 358) 2019-10-30 11:42:48,865 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMGetAllTasksInfoVDSCommand] (org.ovirt.thread.pool-8-thread-25) [31e89bba] -- executeIrsBrokerCommand: Attempting on storage pool '5849b030-626e-47cb-ad90-3ce782d831b3' 2019-10-30 11:42:48,865 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMGetAllTasksInfoVDSCommand] (org.ovirt.thread.pool-8-thread-25) [31e89bba] START, HSMGetAllTasksInfoVDSCommand(HostName = host02, VdsIdVDSCommandParametersBase:{runAsync='true', hostId='3673a0e1-721d-40ba-a179-b1f13a9aec43'}), log id: 47ef923b 2019-10-30 11:42:48,866 INFO [org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand] (org.ovirt.thread.pool-8-thread-34) [31e89bba] Command [id=68bf0e1e-6a0b-41cb-9cad-9eb2bf87c5ee]: Compensating CHANGED_STATUS_ONLY of org.ovirt.engine.core.common.businessentities.StoragePoolIsoMap; snapshot: EntityStatusSnapshot:{id='StoragePoolIsoMapId:{storagePoolId='5849b030-626e-47cb-ad90-3ce782d831b3', storageId='42b7d819-ce3a-4a18-a683-f4817c4bdb06'}', status='Inactive'}. 2019-10-30 11:42:48,888 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-8-thread-34) [31e89bba] Correlation ID: 5b208434, Job ID: dff5f615-9dc4-4d79-a37e-5c6e99a2cc6b, Call Stack: null, Custom Event ID: -1, Message: Failed to activate Storage Domain iso (Data Center Default) by admin@internal Thanks Jonathan

3 4

DHCP Client in Guest VM does not work on ovirtmgmt
by ccesario＠blueit.com.br 13 Nov '19

13 Nov '19

Hello, Is there any special config to usage dhcp client on Guest VM using ovirtmgmt/ovirtmgmt vnic profile ? Currently I have a VM using the ovirtmgmt/ovirtmgmt NIC profile and this interface is configured as DHCP client, and this does not work when using ovirtmgmt/ovirtmgmt as NIC profile. But if I assign manual IP address from the same range of DHCP server the comunication it works. And If usage other NIC profile in other VLAN with other DHCP server it works. It seems ovirtmgmt/ovirtmgmt profile filter the DHCP protocol. Could someone has idea to allow DHCP protocol works on ovirtmgmt/ovirtmgmt NIC profile? Best regards Carlos

7 24

Tesla P4 and /sys/class/mdev_bus/
by Fabrice Bacchella 13 Nov '19

13 Nov '19

I have a Tesla P4 installed on a HPE ProLiant DL360 Gen10 on a CentOS 7.7. The setup was running fine since at least February. I made a successful upgrade from oVirt 4.2 to 4.3 and CentOS 7.6 to CentOS 7.7. I was using in oVirt in a pass-througth setting. I made a minor upgrade a few days ago. And since the VM is unable to see the Tesla P4. I think that the main problem is with mdev. vdsm-client Host hostdevListByCaps | grep mdev return nothing. There is no directory /sys/class/mdev_bus. I tried a full modload: modprobe nvidia_vgpu_vfio nvidia vfio_mdev mdev vfio_iommu_type1 vfio nvidia nvidia-modeset nvidia-drm nvidia-uvm vfio-pci. But it does nothing. Why did my kernel think the P4 is not mdev-compatible any more ? How can I check that ? I think it break when upgrading my kernel from kernel-3.10.0-1062.1.2.el7.x86_64 to kernel-3.10.0-1062.4.1.el7.x86_64. I tried with both the nouveau driver and the nvidia driver.

2 2

Re: Do I need to use self hosted engine with a GlusterFs three node setup
by Strahil 13 Nov '19

13 Nov '19

I remember creating my oVirt setup in 2 stages: 1. Using cockpit to deploy the gluster cluster 2. Using cockpit to deploy HCI on the created gluster clustet. If that's not changed you can only deploy the gluster clustet, thrn deploy the engine somewhere else and then connect the engine (add storage domain) to the gluster cluster, which also can be your oVirt compute nodes (making them at the end HyperConverged oVirt Cluster). Of course , that was an year ago - so it could be different. Best Regards, Strahil NikolovOn Nov 13, 2019 14:16, donagh.moran(a)oracle.com wrote: > > Hi Vojtech > > Thanks for the info, I have been looking for a method of creating the gluster cluster via cockpit on one of my three hosts but the only way I can see is via the hosted engine setup. Is it a case that we need to configure the hosts to use gluster storage with the cli commands prior to adding it to a pre-existing non hosted engine? > > Donagh > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/IIEY3Z3GDGH4V…

1 0

[ANN] oVirt 4.3.7 Third Release Candidate is now available for testing
by Sandro Bonazzola 13 Nov '19

13 Nov '19

The oVirt Project is pleased to announce the availability of the oVirt 4.3.7 Third Release Candidate for testing, as of November 13th, 2019. This update is a release candidate of the seventh in a series of stabilization updates to the 4.3 series. This is pre-release software. This pre-release should not to be used in production. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8) This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8) * oVirt Node 4.3 (available for x86_64 only) has been built consuming CentOS 7.7 Release See the release notes [1] for known issues, new features and bugs fixed. While testing this release candidate please note that oVirt node now includes: - ansible 2.9.0 - GlusterFS 6.6 Notes: - oVirt Appliance is already available - oVirt Node is already available Additional Resources: * Read more about the oVirt 4.3.7 release highlights: http://www.ovirt.org/release/4.3.7/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.7/ [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

2 3

Re: Do I need to use self hosted engine with a GlusterFs three node setup
by Strahil 13 Nov '19

13 Nov '19

You don't need to host the engine on the gluster cluster. I know people you have hosted the engine on a bare metal (pacemaker cluster) , so feel free to experiment. The only requirement is that tge engine needs to be able to communicate with the hosts (I'm not sure if layer 2 connectivity is necessary). Best Regards, Strahil Nikolov Best Regards, Strahil NikolovOn Nov 12, 2019 16:00, donagh.moran(a)oracle.com wrote: > > Every piece of documentation I read regarding the setup of Gluster seems to suggest using at least one of the the nodes to host the engine. Is this a requirement of can I use an engine that is deployed on a VM on another server in the same network? Any info would be much appreciated. > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/LN4CTUMQSTJX4…

2 1

Re: restore
by suporte＠logicworks.pt 13 Nov '19

13 Nov '19

yes you are right. I miss that. Sorry Thanks a lot De: "Staniforth, Paul" <P.Staniforth(a)leedsbeckett.ac.uk> Para: suporte(a)logicworks.pt, "users" <users(a)ovirt.org> Enviadas: Terça-feira, 12 De Novembro de 2019 17:49:18 Assunto: Re: restore As you did a full backup including the data warehouse you need engine-backup --mode=restore --file=file_name --log=log_file_name --provision-db --provision-dwh-db --restore-permissions see https://www.ovirt.org/documentation/admin-guide/chap-Backups_and_Migration.… Backups and Migration | oVirt Chapter 12: Backups and Migration Backing Up and Restoring the oVirt Engine Backing up oVirt Engine - Overview. Use the engine-backup tool to take regular backups of the oVirt Engine. The tool backs up the engine database and configuration files into a single file and can be run without interrupting the ovirt-engine service.. Syntax for the engine-backup Command www.ovirt.org Regards, Paul S. From: suporte(a)logicworks.pt <suporte(a)logicworks.pt> Sent: 12 November 2019 17:39 To: users <users(a)ovirt.org> Subject: [ovirt-users] restore Hi, I did a backup of engine like this # engine-backup --scope=all --mode=backup --file=file_name --log=log_file_name In a newly installed machine try to restore it: # yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release43.rpm # yum update # yum install ovirt-engine # engine-backup --mode=restore --file=file_name --log=log_file_name --provision-db --restore-permissions but get this error: Start of engine-backup with mode 'restore' scope: all archive file: file_name log file: log_file_name Preparing to restore: - Unpacking file 'file_name' Restoring: - Files Provisioning PostgreSQL users/databases: - user 'engine', database 'engine' Restoring: FATAL: Can't connect to database 'ovirt_engine_history'. Please see '/usr/bin/engine-backup --help'. I'm running ovirt Version:4.3.4.3-1.el7 If I run # engine-backup --mode=restore --file=file_name --log=log_file_name --provision-db --no-restore-permissions still the same error Any idea? Many Thanks -- Jose Ferradeira http://www.logicworks.pt To view the terms under which this email is distributed, please go to:- http://leedsbeckett.ac.uk/disclaimer/email/

2 2