December 2019 - Users - oVirt List Archives

Ovirt OVN help needed
by Strahil Nikolov 12 Dec '19

12 Dec '19

Hi Community, can someone hint me how to get rid of some ports? I just want to 'reset' my ovn setup. Here is what I have so far: [root@ovirt1 openvswitch]# ovs-vsctl list interface _uuid : be89c214-10e4-4a97-a9eb-1b82bc433a24 admin_state : up bfd : {} bfd_status : {} cfm_fault : [] cfm_fault_status : [] cfm_flap_count : [] cfm_health : [] cfm_mpid : [] cfm_remote_mpids : [] cfm_remote_opstate : [] duplex : [] error : [] external_ids : {} ifindex : 35 ingress_policing_burst: 0 ingress_policing_rate: 0 lacp_current : [] link_resets : 0 link_speed : [] link_state : up lldp : {} mac : [] mac_in_use : "7a:7d:1d:a7:43:1d" mtu : [] mtu_request : [] name : "ovn-25cc77-0" ofport : 6 ofport_request : [] options : {csum="true", key=flow, remote_ip="192.168.1.64"} other_config : {} statistics : {rx_bytes=0, rx_packets=0, tx_bytes=0, tx_packets=0} status : {tunnel_egress_iface=ovirtmgmt, tunnel_egress_iface_carrier=up} type : geneve _uuid : ec6a6688-e5d6-4346-ac47-ece1b8379440 admin_state : down bfd : {} bfd_status : {} cfm_fault : [] cfm_fault_status : [] cfm_flap_count : [] cfm_health : [] cfm_mpid : [] cfm_remote_mpids : [] cfm_remote_opstate : [] duplex : [] error : [] external_ids : {} ifindex : 13 ingress_policing_burst: 0 ingress_policing_rate: 0 lacp_current : [] link_resets : 0 link_speed : [] link_state : down lldp : {} mac : [] mac_in_use : "66:36:dd:63:dc:48" mtu : 1500 mtu_request : [] name : br-int ofport : 65534 ofport_request : [] options : {} other_config : {} statistics : {collisions=0, rx_bytes=0, rx_crc_err=0, rx_dropped=0, rx_errors=0, rx_frame_err=0, rx_over_err=0, rx_packets=0, tx_bytes=0, tx_dropped=0, tx_errors=0, tx_packets=0} status : {driver_name=openvswitch} type : internal _uuid : 1e511b4d-f7c2-499f-bd8c-07236e7bb7af admin_state : up bfd : {} bfd_status : {} cfm_fault : [] cfm_fault_status : [] cfm_flap_count : [] cfm_health : [] cfm_mpid : [] cfm_remote_mpids : [] cfm_remote_opstate : [] duplex : [] error : [] external_ids : {} ifindex : 35 ingress_policing_burst: 0 ingress_policing_rate: 0 lacp_current : [] link_resets : 0 link_speed : [] link_state : up lldp : {} mac : [] mac_in_use : "1a:85:d1:d9:e2:a5" mtu : [] mtu_request : [] name : "ovn-566849-0" ofport : 5 ofport_request : [] options : {csum="true", key=flow, remote_ip="192.168.1.41"} other_config : {} statistics : {rx_bytes=0, rx_packets=0, tx_bytes=0, tx_packets=0} status : {tunnel_egress_iface=ovirtmgmt, tunnel_egress_iface_carrier=up} type : geneve When I try to remove a port - it never ends (just hanging): [root@ovirt1 openvswitch]# ovs-vsctl --dry-run del-port br-int ovn-25cc77-0 In journal I see only this:дек 12 04:13:57 ovirt1.localdomain ovs-vsctl[22030]: ovs|00001|vsctl|INFO|Called as ovs-vsctl --dry-run del-port br-int ovn-25cc77-0 The stranger part to me is the log output: [root@ovirt1 openvswitch]# grep ovn-25cc77-0 /var/log/openvswitch/*.log /var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:26:28.642Z|00032|bridge|INFO|bridge br-int: added interface ovn-25cc77-0 on port 14 /var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:45:15.646Z|00113|bridge|INFO|bridge br-int: deleted interface ovn-25cc77-0 on port 14 /var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:45:15.861Z|00116|bridge|INFO|bridge br-int: added interface ovn-25cc77-0 on port 2 /var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:50:36.678Z|00118|bridge|INFO|bridge br-int: deleted interface ovn-25cc77-0 on port 2 /var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:52:31.180Z|00121|bridge|INFO|bridge br-int: added interface ovn-25cc77-0 on port 3 /var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:55:09.734Z|00125|bridge|INFO|bridge br-int: deleted interface ovn-25cc77-0 on port 3 /var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:58:15.138Z|00127|bridge|INFO|bridge br-int: added interface ovn-25cc77-0 on port 6 I'm also attaching the verbose output of the dryrun. Thanks in advance. Best Regards,Strahil Nikolov

2 1

ovirt 4.3.7 geo-replication not working
by adrianquintero＠gmail.com 11 Dec '19

11 Dec '19

Hi, I am trying to setup geo-replication between 2 sites, but I keep getting: [root@host1 ~]# gluster vol geo-rep geo-master slave1.mydomain2.com::geo-slave status MASTER NODE MASTER VOL MASTER BRICK SLAVE USER SLAVE SLAVE NODE STATUS CRAWL STATUS LAST_SYNCED -------------------------------------------------------------------------------------------------------------------------------------------------------------------------- host1.mydomain1.com geo-master /gluster_bricks/geo-master/geo-master root slave1.mydomain2.com::geo-slave N/A Faulty N/A N/A host2.mydomain2.com geo-master /gluster_bricks/geo-master/geo-master root slave1.mydomain2.com::geo-slave N/A Faulty N/A N/A vmm11.virt.iad3p geo-master /gluster_bricks/geo-master/geo-master root slave1.mydomain2.com::geo-slave N/A Faulty N/A N/A oVirt GUI has an icon in the volume that says "volume data is being geo-replicated" but we know that is not the case From the logs i can see: [2019-12-11 19:57:48.441557] I [fuse-bridge.c:6810:fini] 0-fuse: Unmounting '/tmp/gsyncd-aux-mount-5WaCmt'. [2019-12-11 19:57:48.441578] I [fuse-bridge.c:6815:fini] 0-fuse: Closing fuse connection to '/tmp/gsyncd-aux-mount-5WaCmt' and [2019-12-11 19:45:14.785758] I [monitor(monitor):278:monitor] Monitor: worker died in startup phase brick=/gluster_bricks/geo-master/geo-master thoughts? thanks, Adrian

1 0

Re: 3node HCI fails when HostedEngineLocal is trying to add additional Gluster members
by Strahil 11 Dec '19

11 Dec '19

Most probably the vdsm or supervdsm's PreExec task is doing it (they got multiple, so you can run manually till you find it out). Just try the following: systemctl stop vdsmd supervdsmd systemctl start supervdsmd Check for certs systemctl start vdsmd Keep in mind that that the chain of events (at least for me is): 1. VG activation 2. VDO activation 3. Gluster brick is mounted (I use systemd service due to deps between vdo, gluster brick and glusterd) 4. Glusterd and libvirt are started 5. Sanlock is started 6. Supervdsm 7. Vdsm If this is a host that will host HostedEngine VM: 8. Ovirt-ha-broker 9. Ovirt-ha-agent After cleanup, did you reboot? Best Regards, Strahil NikolovOn Dec 4, 2019 17:14, thomas(a)hoberg.net wrote: > > After spending another couple of hours trying to track down the problem, I have found that the "lost connection" seems due to KVM shutting down, because it cannot find the certificates for the Spice and VNC connections in /etc/pki/vdsm/*, where 'ovirt-hosted-engine-cleanup' deleted them. > > So now I wonder: Who is supposed to (re-)generated them afterwards? > > Assuming that it was a much earlier step I proceeded to completely undo the deployment, get rid of the Gluster setup etc. and start from the very beginning, only to find that that didn't change a thing: It still missed those certificates.... > > ...while something or someone *did* generated them when I tried a distinct and new set of nodes for counter-testing.. > > That setup failed with an Ansible error (reported separately), but I have now grown afraid of using 'ovirt-hosted-engine-cleanup' when I don't know how to get the ciphers/keys for /etc/pki/vsdm/{spice|vnc} regenerated... > > Can anyone shed some light into this darkness? > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/Z7AFFFU6KMDPS…

2 1

CPU Type compatibility matrix
by Gianluca Cecchi 11 Dec '19

11 Dec '19

Hello, In my case I currently have a cluster with hosts with cpu Intel E5-2680 v4 (each socket with 14 cores) and their Cluster is set as "Intel Broadwell Family" and I would like to add in the same oVirt Cluster two more hosts with Intel E5-2640 v4 cpus (each socket 10 cores) that should be the same CPU Family Type. Is it true? Is there a sort of matrix where one could compare and match? Thanks in advance, Gianluca

4 3

Gluster set up fails - Nearly there I think...
by rob.downer＠orbitalsystems.co.uk 11 Dec '19

11 Dec '19

Gluster fails with vdo: ERROR - Device /dev/sdb excluded by a filter.\n", however I have run [root@ovirt1 ~]# vdo create --name=vdo1 --device=/dev/sdb --force Creating VDO vdo1 Starting VDO vdo1 Starting compression on VDO vdo1 VDO instance 1 volume is ready at /dev/mapper/vdo1 [root@ovirt1 ~]# there are no filters in lvm.conf I have run wipefs -a /dev/sdb —force on all hosts before start

5 9

[ovirt-announce] [ANN] oVirt 4.3.8 Second Release Candidate is now available for testing
by Lev Veyde 11 Dec '19

11 Dec '19

The oVirt Project is pleased to announce the availability of the oVirt 4.3.8 Second Release Candidate for testing, as of December 11th, 2019. This update is a release candidate of the eighth in a series of stabilization updates to the 4.3 series. This is pre-release software. This pre-release should not to be used in production. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8) This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8) * oVirt Node 4.3 (available for x86_64 only) has been built consuming CentOS 7.7 Release See the release notes [1] for known issues, new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Node is already available Additional Resources: * Read more about the oVirt 4.3.8 release highlights: http://www.ovirt.org/release/4.3.8/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.8/ [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

update from 4.2 to 4.3
by Enrico Becchetti 11 Dec '19

11 Dec '19

Dear All. my engine running in a virtual machine Centos 7.6.1810 and ovirt release is 4.2.8.2-1.el7 my hypervisors are Centos 7.6.1810 with vdsm 4.20.46-1.el7, allof them are ovirt-4.2 repository. Now I need to update to the last 4.3 any suggestions ? Thanks a lot Best Regards Enrico -- _______________________________________________________________________ Enrico Becchetti Servizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mail: Enrico.Becchetti<at>pg.infn.it ______________________________________________________________________

2 1

Re: Clusters: Clarification needed on the ballooning memory feature and its affects on the physical hosts memory
by donagh.moran＠oracle.com 11 Dec '19

11 Dec '19

Hi Paul Thanks for the info, you makes it clear what each memory attribute represents in Ovirt but I'm still a little unclear how I would generate over 80% memory usage on the host. Shared Memory: 0% The Max free Memory for scheduling new VMs is 7978 MB which makes sense as its roughly the reminder of 200% of the total host memory minus the memory size allocated for the 4 VM's

1 0

katello-host-tools-3.5.1 and Red Hat Satellite 6.4
by Matthias Leopold 11 Dec '19

11 Dec '19

Hi, I'm trying to register hosts running CentOS 7.6 and oVirt 4.3.5 to a Red Hat Satellite 6.4 server. The oVirt hosts have katello-host-tools-3.5.1 packages from oVirt repos, which seem to be too new for the Red Hat Satellite 6.4 server, Satellite says: Errata: Could not calculate errata status, ensure host is registered and the katello-host-tools package is installed Is there a way to get around this? Downgrade katello-host-tools? -> is this OK for oVirt? Upgrade Red Hat Satellite? -> server not under my control... Is there a compatibility matrix for katello-host-tools and Red Hat Satellite versions? I'm new to this topic.... thx Matthias

3 3

Can't access Storage > Volumes through the UI.
by Valentin Bajrami 11 Dec '19

11 Dec '19

Hello everyone, Recently, I upgraded ovirt-engine from 4.2.5.3-1.el7 to 4.3.6.7-1.el7 but going to Storage > Volumes nothing seems to happen. Volumes does not open up. The error I see in the debugger mode (firefox) is as follows: org.ovirt.engine.ui.uicompat.EnumTranslator WARNING: Missing Enum resource 'V5'. Cannot find constant 'StorageFormatType___V5'; expecting a method name. There is also a bug here: https://bugzilla.redhat.com/show_bug.cgi?id=1759102 Anyone any diea? -- Met vriendelijke groeten / Kind regards, Valentin Bajrami Target Holding

4 9