February 2019 - Users - oVirt List Archives

left over volume after failed disk move
by Bill James 21 Feb '19

21 Feb '19

I tried moving some disks from one gluster volume to another. 8 worked, 6 failed. I can't retry the move because ovirt says: 2019-02-14 21:36:49,450-08 ERROR [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (DefaultQuartzScheduler4) [2d9789d1] BaseAsyncTask::logEndTaskFailure: Task '2a0e703b-0239-41f8-a920 -50c1ae096590' (Parent Command 'CreateImagePlaceholder', Parameters Type 'org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters') ended with failure: -- Result: 'cleanSuccess' -- Message: 'VDSGenericException: VDSErrorException: Failed in vdscommand to HSMGetAllTasksStatusesVDS, error = Volume already exists: ('d33e8048-a4b4-4b85-bf44-20be65b854f2',)', How do I clear up the gluster volume of these failed images? I'm running : ovirt-engine-4.1.8.2-1.el7.centos.noarch glusterfs-3.8.15-2.el7.x86_64 vdsm-4.19.43-1.el7.centos.x86_64 Some errors from the first failed disk move: 2019-02-14 21:23:44,114-08 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.VmReplicateDiskFinishVDSCommand] (DefaultQuartzScheduler2) [7adfa09d-d0d6-4478-9a6a-c505535e325b] Failed in 'VmReplicateDiskFinishVDS' method 2019-02-14 21:23:44,125-08 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler2) [7adfa09d-d0d6-4478-9a6a-c505535e325b] EVENT_ID: V DS_BROKER_COMMAND_FAILURE(10,802), Correlation ID: null, Call Stack: null, Custom ID: null, Custom Event ID: -1, Message: VDSM ovirt4.j2noc.com command VmReplicateDiskFinishVDS fai led: Resource unavailable attached is engine.log.

2 3

understanding ovirt communication
by hlmstu＠hs-lausitz.de 21 Feb '19

21 Feb '19

Hallo, I installed ovirt-engine and ovirt-node. I try add host:new but received errormg InstallFailed. seem connection to following ports: 49076 49080 49084... Howto understanding ovirt communication? keywords: engine,dwh,ovn,libvirt,virtd,node,otopi,vdsmd,sshd,node,goferd regards Heiko

2 3

process stuck while adding disk
by Dev Ops 20 Feb '19

20 Feb '19

I tried adding a 400 gig disk to a VM. I could see the disk being built out on the storage, mounted via nfs, but clearly something is stuck. A few hours later and I see nothing finishing. Nothing seems to be logging to the engine.log and I have restarted vdsmd on all the hosts and have restarted the ovirt-engine and httpd on the engine. I see this running in my Events: https://www.screencast.com/t/OnnWAdTCjQi0 I have added other 400 gig disks to other VM's while this was running and they have completed fine in less than 5 minutes. Not sure where to look to fix this after pretty much restarting everything I could think of to try and unlock the process. /usr/share/ovirt-engine/setup/dbutils/unlock_entity.sh -t all -q Locked VMs Locked templates Locked disks Locked snapshots Illegal images Thanks!

1 1

oVirt 4.3.1 test day
by Sandro Bonazzola 20 Feb '19

20 Feb '19

Hi, We are planning to release the first candidate of 4.3.1 on February 20th[1] and the final release on February 26th. Please join us testing this release candidate right after it will be announced! We are going to coordinate the testing effort with a public Trello board at https://trello.com/b/5ZNJgPC3 You'll find instructions on how to use the board there. If you have an environment dedicated to testing, remember you can setup a few VMs and test the deployment with nested virtualization. To ease the setup of such environment you can use Lago ( https://github.com/lago-project) The oVirt team will monitor the Trello board, the #ovirt IRC channel on irc.oftc.net server and the users(a)ovirt.org mailing list to assist with the testing. [1] https://www.ovirt.org/develop/release-management/releases/4.3.z/release-man… -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

4 5

cannot start vm after upgrade to ovirt-4.3
by Moritz Baumann 20 Feb '19

20 Feb '19

After upgrading from 4.2 -> 4.3 I cannot start a vm anymore. I try to start the vm with run once on a specific node (ovirt-node04) and this is the output of /var/log/vdsm/vdsm.log 2019-02-19 12:08:33,626+0100 INFO (jsonrpc/6) [api.host] START getAllVmStats() from=::ffff:129.132.17.194,33924 (api:48) 2019-02-19 12:08:33,631+0100 INFO (jsonrpc/6) [api.host] FINISH getAllVmStats return={'status': {'message': 'Done', 'code': 0}, 'statsList': (suppressed)} from=::ffff:129.132.17.194,33924 (api:54) 2019-02-19 12:08:33,633+0100 INFO (jsonrpc/6) [jsonrpc.JsonRpcServer] RPC call Host.getAllVmStats succeeded in 0.00 seconds (__init__:312) 2019-02-19 12:08:34,218+0100 INFO (jsonrpc/4) [api.virt] START create(vmParams={u'xml': u'<?xml version="1.0" encoding="UTF-8"?><domain type="kvm" xmlns:ovirt-tune="http://ovirt.org/vm/tune/1.0" xmlns:ovirt-vm="http://ovirt.org/vm/1.0"><name>mortalkombat</name><uuid>abee17b9-079e-452c-a97d-99eff951dc39</uuid><memory>2097152</memory><currentMemory>2097152</currentMemory><maxMemory slots="16">8388608</maxMemory><vcpu current="1">16</vcpu><sysinfo type="smbios"><system><entry name="manufacturer">oVirt</entry><entry name="product">OS-NAME:</entry><entry name="version">OS-VERSION:</entry><entry name="serial">HOST-SERIAL:</entry><entry name="uuid">abee17b9-079e-452c-a97d-99eff951dc39</entry></system></sysinfo><clock offset="variable" adjustment="0"><timer name="rtc" tickpolicy="catchup"></timer><timer name="pit" tickpolicy="delay"></timer><timer name="hpet" present="no"></timer></clock><features><acpi></acpi></features><cpu match="exact"><model>SandyBridge</model><feature name="pcid" policy="require"></feature><feature name="spec-ctrl" policy="require"></feature><feature name="ssbd" policy="require"></feature><topology cores="1" threads="1" sockets="16"></topology><numa><cell id="0" cpus="0" memory="2097152"></cell></numa></cpu><cputune></cputune><devices><input type="mouse" bus="ps2"></input><channel type="unix"><target type="virtio" name="ovirt-guest-agent.0"></target><source mode="bind" path="/var/lib/libvirt/qemu/channels/abee17b9-079e-452c-a97d-99eff951dc39.ovirt-guest-agent.0"></source></channel><channel type="unix"><target type="virtio" name="org.qemu.guest_agent.0"></target><source mode="bind" path="/var/lib/libvirt/qemu/channels/abee17b9-079e-452c-a97d-99eff951dc39.org.qemu.guest_agent.0"></source></channel><rng model="virtio"><backend model="random">/dev/urandom</backend><alias name="ua-39b1e011-518c-4ca6-91c8-6ae63cea0824"></alias></rng><video><model type="qxl" vram="32768" heads="1" ram="65536" vgamem="16384"></model><alias name="ua-5de2d61a-2e0e-4194-b023-c1bfcb8f9f4e"></alias><address bus="0x00" domain="0x0000" function="0x0" slot="0x02" type="pci"></address></video><controller type="virtio-serial" index="0" ports="16"><alias name="ua-78c78899-4f5b-4217-95eb-d11ebf3b882e"></alias><address bus="0x00" domain="0x0000" function="0x0" slot="0x04" type="pci"></address></controller><controller type="usb" model="piix3-uhci" index="0"><address bus="0x00" domain="0x0000" function="0x2" slot="0x01" type="pci"></address></controller><memballoon model="virtio"><stats period="5"></stats><alias name="ua-94e7e4cb-9b07-4560-bb25-b02ef2b0cdbe"></alias><address bus="0x00" domain="0x0000" function="0x0" slot="0x06" type="pci"></address></memballoon><graphics type="spice" port="-1" autoport="yes" passwd="*****" passwdValidTo="1970-01-01T00:00:01" tlsPort="-1"><filetransfer enable="no"></filetransfer><channel name="main" mode="secure"></channel><channel name="inputs" mode="secure"></channel><channel name="cursor" mode="secure"></channel><channel name="playback" mode="secure"></channel><channel name="record" mode="secure"></channel><channel name="display" mode="secure"></channel><channel name="smartcard" mode="secure"></channel><channel name="usbredir" mode="secure"></channel><listen type="network" network="vdsm-ovirtmgmt"></listen></graphics><channel type="spicevmc"><target type="virtio" name="com.redhat.spice.0"></target></channel><interface type="bridge"><model type="virtio"></model><link state="up"></link><source bridge="external"></source><alias name="ua-b5ce5e56-0a45-4917-b60b-a83edae1c649"></alias><address bus="0x00" domain="0x0000" function="0x0" slot="0x03" type="pci"></address><boot order="2"></boot><mac address="00:1a:4a:1b:a4:01"></mac><mtu size="1500"></mtu><filterref filter="vdsm-no-mac-spoofing"></filterref><bandwidth></bandwidth></interface><disk type="file" device="cdrom" snapshot="no"><driver name="qemu" type="raw" error_policy="report"></driver><source file="" startupPolicy="optional"></source><target dev="hdc" bus="ide"></target><readonly></readonly><alias name="ua-70717d83-9339-426b-b954-0ed01f8d60db"></alias><address bus="1" controller="0" unit="0" type="drive" target="0"></address></disk><disk snapshot="no" type="file" device="disk"><target dev="vda" bus="virtio"></target><source file="/rhev/data-center/00000002-0002-0002-0002-0000000003c4/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/ef5893bc-cbe0-4971-8884-a4547a65fcc8/21f73e32-2bd1-46db-a4cd-b0e01416954c"></source><driver name="qemu" io="threads" type="raw" error_policy="stop" cache="none"></driver><alias name="ua-ef5893bc-cbe0-4971-8884-a4547a65fcc8"></alias><boot order="1"></boot><serial>ef5893bc-cbe0-4971-8884-a4547a65fcc8</serial></disk><disk snapshot="no" type="file" device="disk"><target dev="vdb" bus="virtio"></target><source file="/rhev/data-center/00000002-0002-0002-0002-0000000003c4/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/9b913d5d-5103-44c8-9053-6a02f5dd3562/482698c2-b1bd-4715-9bc5-e222405260df"></source><driver name="qemu" io="threads" type="raw" error_policy="stop" cache="none"></driver><alias name="ua-9b913d5d-5103-44c8-9053-6a02f5dd3562"></alias><serial>9b913d5d-5103-44c8-9053-6a02f5dd3562</serial></disk></devices><pm><suspend-to-disk enabled="no"></suspend-to-disk><suspend-to-mem enabled="no"></suspend-to-mem></pm><os><type arch="x86_64" machine="pc-i440fx-rhel7.6.0">hvm</type><smbios mode="sysinfo"></smbios><bootmenu enable="yes" timeout="30000"></bootmenu></os><metadata><ovirt-tune:qos></ovirt-tune:qos><ovirt-vm:vm><ovirt-vm:minGuaranteedMemoryMb type="int">2048</ovirt-vm:minGuaranteedMemoryMb><ovirt-vm:clusterVersion>4.3</ovirt-vm:clusterVersion><ovirt-vm:custom></ovirt-vm:custom><ovirt-vm:device mac_address="00:1a:4a:1b:a4:01"><ovirt-vm:custom></ovirt-vm:custom></ovirt-vm:device><ovirt-vm:device devtype="disk" name="vda"><ovirt-vm:poolID>00000002-0002-0002-0002-0000000003c4</ovirt-vm:poolID><ovirt-vm:volumeID>21f73e32-2bd1-46db-a4cd-b0e01416954c</ovirt-vm:volumeID><ovirt-vm:imageID>ef5893bc-cbe0-4971-8884-a4547a65fcc8</ovirt-vm:imageID><ovirt-vm:domainID>c17d9d7f-e578-4626-a5d9-94ea555d7115</ovirt-vm:domainID></ovirt-vm:device><ovirt-vm:device devtype="disk" name="vdb"><ovirt-vm:poolID>00000002-0002-0002-0002-0000000003c4</ovirt-vm:poolID><ovirt-vm:volumeID>482698c2-b1bd-4715-9bc5-e222405260df</ovirt-vm:volumeID><ovirt-vm:imageID>9b913d5d-5103-44c8-9053-6a02f5dd3562</ovirt-vm:imageID><ovirt-vm:domainID>c17d9d7f-e578-4626-a5d9-94ea555d7115</ovirt-vm:domainID></ovirt-vm:device><ovirt-vm:launchPaused>false</ovirt-vm:launchPaused><ovirt-vm:resumeBehavior>auto_resume</ovirt-vm:resumeBehavior></ovirt-vm:vm></metadata></domain>'}) from=::ffff:129.132.17.194,33924, flow_id=978c7200-b51e-42f8-962d-e8e11383ee53, vmId= (api:48) 2019-02-19 12:08:34,255+0100 INFO (jsonrpc/4) [api.virt] FINISH create return={'status': {'message': 'Done', 'code': 0}, 'vmList': {'status': 'WaitForLaunch', 'maxMemSize': 8192, 'acpiEnable': 'true', 'emulatedMachine': 'pc-i440fx-rhel7.6.0', 'vmId': 'abee17b9-079e-452c-a97d-99eff951dc39', 'memGuaranteedSize': 2048, 'timeOffset': '0', 'smpThreadsPerCore': '1', 'cpuType': 'SandyBridge', 'guestDiskMapping': {}, 'arch': 'x86_64', 'smp': '1', 'guestNumaNodes': [{'nodeIndex': 0, 'cpus': '0', 'memory': '2048'}], u'xml': u'<?xml version="1.0" encoding="UTF-8"?><domain type="kvm" xmlns:ovirt-tune="http://ovirt.org/vm/tune/1.0" xmlns:ovirt-vm="http://ovirt.org/vm/1.0"><name>mortalkombat</name><uuid>abee17b9-079e-452c-a97d-99eff951dc39</uuid><memory>2097152</memory><currentMemory>2097152</currentMemory><maxMemory slots="16">8388608</maxMemory><vcpu current="1">16</vcpu><sysinfo type="smbios"><system><entry name="manufacturer">oVirt</entry><entry name="product">OS-NAME:</entry><entry name="version">OS-VERSION:</entry><entry name="serial">HOST-SERIAL:</entry><entry name="uuid">abee17b9-079e-452c-a97d-99eff951dc39</entry></system></sysinfo><clock offset="variable" adjustment="0"><timer name="rtc" tickpolicy="catchup"></timer><timer name="pit" tickpolicy="delay"></timer><timer name="hpet" present="no"></timer></clock><features><acpi></acpi></features><cpu match="exact"><model>SandyBridge</model><feature name="pcid" policy="require"></feature><feature name="spec-ctrl" policy="require"></feature><feature name="ssbd" policy="require"></feature><topology cores="1" threads="1" sockets="16"></topology><numa><cell id="0" cpus="0" memory="2097152"></cell></numa></cpu><cputune></cputune><devices><input type="mouse" bus="ps2"></input><channel type="unix"><target type="virtio" name="ovirt-guest-agent.0"></target><source mode="bind" path="/var/lib/libvirt/qemu/channels/abee17b9-079e-452c-a97d-99eff951dc39.ovirt-guest-agent.0"></source></channel><channel type="unix"><target type="virtio" name="org.qemu.guest_agent.0"></target><source mode="bind" path="/var/lib/libvirt/qemu/channels/abee17b9-079e-452c-a97d-99eff951dc39.org.qemu.guest_agent.0"></source></channel><rng model="virtio"><backend model="random">/dev/urandom</backend><alias name="ua-39b1e011-518c-4ca6-91c8-6ae63cea0824"></alias></rng><video><model type="qxl" vram="32768" heads="1" ram="65536" vgamem="16384"></model><alias name="ua-5de2d61a-2e0e-4194-b023-c1bfcb8f9f4e"></alias><address bus="0x00" domain="0x0000" function="0x0" slot="0x02" type="pci"></address></video><controller type="virtio-serial" index="0" ports="16"><alias name="ua-78c78899-4f5b-4217-95eb-d11ebf3b882e"></alias><address bus="0x00" domain="0x0000" function="0x0" slot="0x04" type="pci"></address></controller><controller type="usb" model="piix3-uhci" index="0"><address bus="0x00" domain="0x0000" function="0x2" slot="0x01" type="pci"></address></controller><memballoon model="virtio"><stats period="5"></stats><alias name="ua-94e7e4cb-9b07-4560-bb25-b02ef2b0cdbe"></alias><address bus="0x00" domain="0x0000" function="0x0" slot="0x06" type="pci"></address></memballoon><graphics type="spice" port="-1" autoport="yes" passwd="*****" passwdValidTo="1970-01-01T00:00:01" tlsPort="-1"><filetransfer enable="no"></filetransfer><channel name="main" mode="secure"></channel><channel name="inputs" mode="secure"></channel><channel name="cursor" mode="secure"></channel><channel name="playback" mode="secure"></channel><channel name="record" mode="secure"></channel><channel name="display" mode="secure"></channel><channel name="smartcard" mode="secure"></channel><channel name="usbredir" mode="secure"></channel><listen type="network" network="vdsm-ovirtmgmt"></listen></graphics><channel type="spicevmc"><target type="virtio" name="com.redhat.spice.0"></target></channel><interface type="bridge"><model type="virtio"></model><link state="up"></link><source bridge="external"></source><alias name="ua-b5ce5e56-0a45-4917-b60b-a83edae1c649"></alias><address bus="0x00" domain="0x0000" function="0x0" slot="0x03" type="pci"></address><boot order="2"></boot><mac address="00:1a:4a:1b:a4:01"></mac><mtu size="1500"></mtu><filterref filter="vdsm-no-mac-spoofing"></filterref><bandwidth></bandwidth></interface><disk type="file" device="cdrom" snapshot="no"><driver name="qemu" type="raw" error_policy="report"></driver><source file="" startupPolicy="optional"></source><target dev="hdc" bus="ide"></target><readonly></readonly><alias name="ua-70717d83-9339-426b-b954-0ed01f8d60db"></alias><address bus="1" controller="0" unit="0" type="drive" target="0"></address></disk><disk snapshot="no" type="file" device="disk"><target dev="vda" bus="virtio"></target><source file="/rhev/data-center/00000002-0002-0002-0002-0000000003c4/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/ef5893bc-cbe0-4971-8884-a4547a65fcc8/21f73e32-2bd1-46db-a4cd-b0e01416954c"></source><driver name="qemu" io="threads" type="raw" error_policy="stop" cache="none"></driver><alias name="ua-ef5893bc-cbe0-4971-8884-a4547a65fcc8"></alias><boot order="1"></boot><serial>ef5893bc-cbe0-4971-8884-a4547a65fcc8</serial></disk><disk snapshot="no" type="file" device="disk"><target dev="vdb" bus="virtio"></target><source file="/rhev/data-center/00000002-0002-0002-0002-0000000003c4/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/9b913d5d-5103-44c8-9053-6a02f5dd3562/482698c2-b1bd-4715-9bc5-e222405260df"></source><driver name="qemu" io="threads" type="raw" error_policy="stop" cache="none"></driver><alias name="ua-9b913d5d-5103-44c8-9053-6a02f5dd3562"></alias><serial>9b913d5d-5103-44c8-9053-6a02f5dd3562</serial></disk></devices><pm><suspend-to-disk enabled="no"></suspend-to-disk><suspend-to-mem enabled="no"></suspend-to-mem></pm><os><type arch="x86_64" machine="pc-i440fx-rhel7.6.0">hvm</type><smbios mode="sysinfo"></smbios><bootmenu enable="yes" timeout="30000"></bootmenu></os><metadata><ovirt-tune:qos></ovirt-tune:qos><ovirt-vm:vm><ovirt-vm:minGuaranteedMemoryMb type="int">2048</ovirt-vm:minGuaranteedMemoryMb><ovirt-vm:clusterVersion>4.3</ovirt-vm:clusterVersion><ovirt-vm:custom></ovirt-vm:custom><ovirt-vm:device mac_address="00:1a:4a:1b:a4:01"><ovirt-vm:custom></ovirt-vm:custom></ovirt-vm:device><ovirt-vm:device devtype="disk" name="vda"><ovirt-vm:poolID>00000002-0002-0002-0002-0000000003c4</ovirt-vm:poolID><ovirt-vm:volumeID>21f73e32-2bd1-46db-a4cd-b0e01416954c</ovirt-vm:volumeID><ovirt-vm:imageID>ef5893bc-cbe0-4971-8884-a4547a65fcc8</ovirt-vm:imageID><ovirt-vm:domainID>c17d9d7f-e578-4626-a5d9-94ea555d7115</ovirt-vm:domainID></ovirt-vm:device><ovirt-vm:device devtype="disk" name="vdb"><ovirt-vm:poolID>00000002-0002-0002-0002-0000000003c4</ovirt-vm:poolID><ovirt-vm:volumeID>482698c2-b1bd-4715-9bc5-e222405260df</ovirt-vm:volumeID><ovirt-vm:imageID>9b913d5d-5103-44c8-9053-6a02f5dd3562</ovirt-vm:imageID><ovirt-vm:domainID>c17d9d7f-e578-4626-a5d9-94ea555d7115</ovirt-vm:domainID></ovirt-vm:device><ovirt-vm:launchPaused>false</ovirt-vm:launchPaused><ovirt-vm:resumeBehavior>auto_resume</ovirt-vm:resumeBehavior></ovirt-vm:vm></metadata></domain>', 'smpCoresPerSocket': '1', 'kvmEnable': 'true', 'bootMenuEnable': 'true', 'devices': [], 'custom': {}, 'maxVCpus': '16', 'statusTime': '4357298760', 'vmName': 'mortalkombat', 'maxMemSlots': 16}} from=::ffff:129.132.17.194,33924, flow_id=978c7200-b51e-42f8-962d-e8e11383ee53, vmId= (api:54) 2019-02-19 12:08:34,256+0100 INFO (jsonrpc/4) [jsonrpc.JsonRpcServer] RPC call VM.create succeeded in 0.04 seconds (__init__:312) 2019-02-19 12:08:34,257+0100 INFO (vm/abee17b9) [virt.vm] (vmId='abee17b9-079e-452c-a97d-99eff951dc39') VM wrapper has started (vm:2736) 2019-02-19 12:08:34,273+0100 INFO (vm/abee17b9) [vdsm.api] START getVolumeSize(sdUUID='c17d9d7f-e578-4626-a5d9-94ea555d7115', spUUID='00000002-0002-0002-0002-0000000003c4', imgUUID='ef5893bc-cbe0-4971-8884-a4547a65fcc8', volUUID='21f73e32-2bd1-46db-a4cd-b0e01416954c', options=None) from=internal, task_id=e0a3dd79-a36a-4ce2-97ac-d9b3f32cc81f (api:48) 2019-02-19 12:08:34,275+0100 INFO (vm/abee17b9) [vdsm.api] FINISH getVolumeSize return={'truesize': '10631581696', 'apparentsize': '21474836480'} from=internal, task_id=e0a3dd79-a36a-4ce2-97ac-d9b3f32cc81f (api:54) 2019-02-19 12:08:34,275+0100 INFO (vm/abee17b9) [vdsm.api] START getVolumeSize(sdUUID='c17d9d7f-e578-4626-a5d9-94ea555d7115', spUUID='00000002-0002-0002-0002-0000000003c4', imgUUID='9b913d5d-5103-44c8-9053-6a02f5dd3562', volUUID='482698c2-b1bd-4715-9bc5-e222405260df', options=None) from=internal, task_id=7337d2b1-0c2e-48c6-8e12-82d3d7313652 (api:48) 2019-02-19 12:08:34,277+0100 INFO (vm/abee17b9) [vdsm.api] FINISH getVolumeSize return={'truesize': '102303330304', 'apparentsize': '107374182400'} from=internal, task_id=7337d2b1-0c2e-48c6-8e12-82d3d7313652 (api:54) 2019-02-19 12:08:34,277+0100 INFO (vm/abee17b9) [vds] prepared volume path: (clientIF:499) 2019-02-19 12:08:34,277+0100 INFO (vm/abee17b9) [vdsm.api] START prepareImage(sdUUID='c17d9d7f-e578-4626-a5d9-94ea555d7115', spUUID='00000002-0002-0002-0002-0000000003c4', imgUUID='ef5893bc-cbe0-4971-8884-a4547a65fcc8', leafUUID='21f73e32-2bd1-46db-a4cd-b0e01416954c', allowIllegal=False) from=internal, task_id=e8780fff-1def-439c-854c-62478ccf6176 (api:48) 2019-02-19 12:08:34,302+0100 INFO (vm/abee17b9) [storage.StorageDomain] Fixing permissions on /rhev/data-center/mnt/scratch-inf.inf.ethz.ch:_export_scratch_ovirt_data/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/ef5893bc-cbe0-4971-8884-a4547a65fcc8/21f73e32-2bd1-46db-a4cd-b0e01416954c (fileSD:622) 2019-02-19 12:08:34,302+0100 INFO (vm/abee17b9) [storage.StorageDomain] Creating domain run directory u'/var/run/vdsm/storage/c17d9d7f-e578-4626-a5d9-94ea555d7115' (fileSD:576) 2019-02-19 12:08:34,302+0100 INFO (vm/abee17b9) [storage.fileUtils] Creating directory: /var/run/vdsm/storage/c17d9d7f-e578-4626-a5d9-94ea555d7115 mode: None (fileUtils:199) 2019-02-19 12:08:34,303+0100 INFO (vm/abee17b9) [storage.StorageDomain] Creating symlink from /rhev/data-center/mnt/scratch-inf.inf.ethz.ch:_export_scratch_ovirt_data/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/ef5893bc-cbe0-4971-8884-a4547a65fcc8 to /var/run/vdsm/storage/c17d9d7f-e578-4626-a5d9-94ea555d7115/ef5893bc-cbe0-4971-8884-a4547a65fcc8 (fileSD:579) 2019-02-19 12:08:34,306+0100 INFO (vm/abee17b9) [vdsm.api] FINISH prepareImage return={'info': {'path': u'/rhev/data-center/mnt/scratch-inf.inf.ethz.ch:_export_scratch_ovirt_data/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/ef5893bc-cbe0-4971-8884-a4547a65fcc8/21f73e32-2bd1-46db-a4cd-b0e01416954c', 'type': 'file'}, 'path': u'/rhev/data-center/mnt/scratch-inf.inf.ethz.ch:_export_scratch_ovirt_data/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/ef5893bc-cbe0-4971-8884-a4547a65fcc8/21f73e32-2bd1-46db-a4cd-b0e01416954c', 'imgVolumesInfo': [{'domainID': 'c17d9d7f-e578-4626-a5d9-94ea555d7115', 'leaseOffset': 0, 'path': u'/rhev/data-center/mnt/scratch-inf.inf.ethz.ch:_export_scratch_ovirt_data/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/ef5893bc-cbe0-4971-8884-a4547a65fcc8/21f73e32-2bd1-46db-a4cd-b0e01416954c', 'volumeID': u'21f73e32-2bd1-46db-a4cd-b0e01416954c', 'leasePath': u'/rhev/data-center/mnt/scratch-inf.inf.ethz.ch:_export_scratch_ovirt_data/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/ef5893bc-cbe0-4971-8884-a4547a65fcc8/21f73e32-2bd1-46db-a4cd-b0e01416954c.lease', 'imageID': 'ef5893bc-cbe0-4971-8884-a4547a65fcc8'}]} from=internal, task_id=e8780fff-1def-439c-854c-62478ccf6176 (api:54) 2019-02-19 12:08:34,306+0100 INFO (vm/abee17b9) [vds] prepared volume path: /rhev/data-center/mnt/scratch-inf.inf.ethz.ch:_export_scratch_ovirt_data/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/ef5893bc-cbe0-4971-8884-a4547a65fcc8/21f73e32-2bd1-46db-a4cd-b0e01416954c (clientIF:499) 2019-02-19 12:08:34,307+0100 INFO (vm/abee17b9) [vdsm.api] START prepareImage(sdUUID='c17d9d7f-e578-4626-a5d9-94ea555d7115', spUUID='00000002-0002-0002-0002-0000000003c4', imgUUID='9b913d5d-5103-44c8-9053-6a02f5dd3562', leafUUID='482698c2-b1bd-4715-9bc5-e222405260df', allowIllegal=False) from=internal, task_id=d04f3abb-f3d3-4e2f-902f-d3c5e4fabc36 (api:48) 2019-02-19 12:08:34,322+0100 INFO (vm/abee17b9) [vdsm.api] FINISH prepareImage error=Volume does not exist: (u'482698c2-b1bd-4715-9bc5-e222405260df',) from=internal, task_id=d04f3abb-f3d3-4e2f-902f-d3c5e4fabc36 (api:52) 2019-02-19 12:08:34,322+0100 ERROR (vm/abee17b9) [storage.TaskManager.Task] (Task='d04f3abb-f3d3-4e2f-902f-d3c5e4fabc36') Unexpected error (task:875) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 882, in _run return fn(*args, **kargs) File "<string>", line 2, in prepareImage File "/usr/lib/python2.7/site-packages/vdsm/common/api.py", line 50, in method ret = func(*args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/storage/hsm.py", line 3198, in prepareImage legality = dom.produceVolume(imgUUID, volUUID).getLegality() File "/usr/lib/python2.7/site-packages/vdsm/storage/sd.py", line 818, in produceVolume volUUID) File "/usr/lib/python2.7/site-packages/vdsm/storage/volume.py", line 800, in __init__ self._manifest = self.manifestClass(repoPath, sdUUID, imgUUID, volUUID) File "/usr/lib/python2.7/site-packages/vdsm/storage/fileVolume.py", line 71, in __init__ volUUID) File "/usr/lib/python2.7/site-packages/vdsm/storage/volume.py", line 86, in __init__ self.validate() File "/usr/lib/python2.7/site-packages/vdsm/storage/volume.py", line 112, in validate self.validateVolumePath() File "/usr/lib/python2.7/site-packages/vdsm/storage/fileVolume.py", line 131, in validateVolumePath raise se.VolumeDoesNotExist(self.volUUID) VolumeDoesNotExist: Volume does not exist: (u'482698c2-b1bd-4715-9bc5-e222405260df',) 2019-02-19 12:08:34,322+0100 INFO (vm/abee17b9) [storage.TaskManager.Task] (Task='d04f3abb-f3d3-4e2f-902f-d3c5e4fabc36') aborting: Task is aborted: "Volume does not exist: (u'482698c2-b1bd-4715-9bc5-e222405260df',)" - code 201 (task:1181) 2019-02-19 12:08:34,322+0100 ERROR (vm/abee17b9) [storage.Dispatcher] FINISH prepareImage error=Volume does not exist: (u'482698c2-b1bd-4715-9bc5-e222405260df',) (dispatcher:81) 2019-02-19 12:08:34,322+0100 ERROR (vm/abee17b9) [virt.vm] (vmId='abee17b9-079e-452c-a97d-99eff951dc39') The vm start process failed (vm:937) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 866, in _startUnderlyingVm self._run() File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2749, in _run self._devices = self._make_devices() File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2589, in _make_devices disk_objs = self._perform_host_local_adjustment() File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2662, in _perform_host_local_adjustment self._preparePathsForDrives(disk_params) File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 1011, in _preparePathsForDrives drive['path'] = self.cif.prepareVolumePath(drive, self.id) File "/usr/lib/python2.7/site-packages/vdsm/clientIF.py", line 415, in prepareVolumePath raise vm.VolumeError(drive) VolumeError: Bad volume specification {'index': 1, 'domainID': 'c17d9d7f-e578-4626-a5d9-94ea555d7115', 'reqsize': '0', 'name': 'vdb', 'truesize': '102303330304', 'alias': 'ua-9b913d5d-5103-44c8-9053-6a02f5dd3562', 'format': 'raw', 'discard': False, 'volumeID': '482698c2-b1bd-4715-9bc5-e222405260df', 'apparentsize': '107374182400', 'diskType': 'file', 'specParams': {}, 'iface': 'virtio', 'cache': 'none', 'propagateErrors': 'off', 'poolID': '00000002-0002-0002-0002-0000000003c4', 'device': 'disk', 'path': '/rhev/data-center/00000002-0002-0002-0002-0000000003c4/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/9b913d5d-5103-44c8-9053-6a02f5dd3562/482698c2-b1bd-4715-9bc5-e222405260df', 'serial': '9b913d5d-5103-44c8-9053-6a02f5dd3562', 'imageID': '9b913d5d-5103-44c8-9053-6a02f5dd3562', 'type': 'disk'} 2019-02-19 12:08:34,322+0100 INFO (vm/abee17b9) [virt.vm] (vmId='abee17b9-079e-452c-a97d-99eff951dc39') Changed state to Down: Bad volume specification {'index': 1, 'domainID': 'c17d9d7f-e578-4626-a5d9-94ea555d7115', 'reqsize': '0', 'name': 'vdb', 'truesize': '102303330304', 'alias': 'ua-9b913d5d-5103-44c8-9053-6a02f5dd3562', 'format': 'raw', 'discard': False, 'volumeID': '482698c2-b1bd-4715-9bc5-e222405260df', 'apparentsize': '107374182400', 'diskType': 'file', 'specParams': {}, 'iface': 'virtio', 'cache': 'none', 'propagateErrors': 'off', 'poolID': '00000002-0002-0002-0002-0000000003c4', 'device': 'disk', 'path': '/rhev/data-center/00000002-0002-0002-0002-0000000003c4/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/9b913d5d-5103-44c8-9053-6a02f5dd3562/482698c2-b1bd-4715-9bc5-e222405260df', 'serial': '9b913d5d-5103-44c8-9053-6a02f5dd3562', 'imageID': '9b913d5d-5103-44c8-9053-6a02f5dd3562', 'type': 'disk'} (code=1) (vm:1675) 2019-02-19 12:08:34,326+0100 INFO (vm/abee17b9) [virt.vm] (vmId='abee17b9-079e-452c-a97d-99eff951dc39') Stopping connection (guestagent:455) 2019-02-19 12:08:34,330+0100 INFO (jsonrpc/5) [api.virt] START destroy(gracefulAttempts=1) from=::ffff:129.132.17.194,33924, vmId=abee17b9-079e-452c-a97d-99eff951dc39 (api:48) 2019-02-19 12:08:34,331+0100 INFO (jsonrpc/5) [virt.vm] (vmId='abee17b9-079e-452c-a97d-99eff951dc39') Release VM resources (vm:5127) 2019-02-19 12:08:34,331+0100 WARN (jsonrpc/5) [virt.vm] (vmId='abee17b9-079e-452c-a97d-99eff951dc39') trying to set state to Powering down when already Down (vm:624) 2019-02-19 12:08:34,331+0100 INFO (jsonrpc/5) [virt.vm] (vmId='abee17b9-079e-452c-a97d-99eff951dc39') Stopping connection (guestagent:455) 2019-02-19 12:08:34,331+0100 INFO (jsonrpc/5) [virt.vm] (vmId='abee17b9-079e-452c-a97d-99eff951dc39') Stopping connection (guestagent:455) 2019-02-19 12:08:34,331+0100 WARN (jsonrpc/5) [root] File: /var/lib/libvirt/qemu/channels/abee17b9-079e-452c-a97d-99eff951dc39.ovirt-guest-agent.0 already removed (fileutils:54) 2019-02-19 12:08:34,332+0100 WARN (jsonrpc/5) [root] File: /var/lib/libvirt/qemu/channels/abee17b9-079e-452c-a97d-99eff951dc39.org.qemu.guest_agent.0 already removed (fileutils:54) 2019-02-19 12:08:34,332+0100 WARN (jsonrpc/5) [virt.vm] (vmId='abee17b9-079e-452c-a97d-99eff951dc39') timestamp already removed from stats cache (vm:2395) 2019-02-19 12:08:34,332+0100 INFO (jsonrpc/5) [vdsm.api] START inappropriateDevices(thiefId='abee17b9-079e-452c-a97d-99eff951dc39') from=::ffff:129.132.17.194,33924, task_id=9474f7a3-9938-464e-ad08-ba61c6c528c9 (api:48) 2019-02-19 12:08:34,333+0100 INFO (jsonrpc/5) [vdsm.api] FINISH inappropriateDevices return=None from=::ffff:129.132.17.194,33924, task_id=9474f7a3-9938-464e-ad08-ba61c6c528c9 (api:54) 2019-02-19 12:08:34,522+0100 INFO (jsonrpc/5) [root] /usr/libexec/vdsm/hooks/after_vm_destroy/50_vhostmd: rc=0 err= (hooks:114) 2019-02-19 12:08:34,656+0100 INFO (jsonrpc/5) [root] /usr/libexec/vdsm/hooks/after_vm_destroy/delete_vhostuserclient_hook: rc=0 err= (hooks:114) 2019-02-19 12:08:34,657+0100 INFO (jsonrpc/5) [api.virt] FINISH destroy return={'status': {'message': 'Machine destroyed', 'code': 0}} from=::ffff:129.132.17.194,33924, vmId=abee17b9-079e-452c-a97d-99eff951dc39 (api:54) 2019-02-19 12:08:34,657+0100 INFO (jsonrpc/5) [jsonrpc.JsonRpcServer] RPC call VM.destroy succeeded in 0.33 seconds (__init__:312)

3 3

[ANN] oVirt 4.3.1 First Release Candidate is now available
by Sandro Bonazzola 20 Feb '19

20 Feb '19

The oVirt Project is pleased to announce the availability of the oVirt 4.3.1 First Release Candidate, as of February 20th, 2019. This update is a release candidate of the first in a series of stabilization updates to the 4.3 series. This is pre-release software. This pre-release should not to be used in production. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later * oVirt Node 4.3 (available for x86_64 only) Experimental tech preview for x86_64 and s390x architectures for Fedora 28 is also included. See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available for EL7 only - oVirt Node is available for EL7 only [2] - Fedora 28 based appliance and node couldn't be built due to a bug in Lorax (the tool used to build the images) affecting Fedora 28. Additional Resources: * Read more about the oVirt 4.3.1 release highlights: http://www.ovirt.org/release/4.3.1/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.1/ [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

1 0

Re: Unable to upload images
by Nir Soffer 20 Feb '19

20 Feb '19

On Tue, Feb 19, 2019 at 11:29 PM Michael Blanchard <michael(a)wanderingmad.com> wrote: > I don't even get the that point. I try to upload to he Kemp Roadmaster > vm in .disk format and it says not in proper format and errors out. No log > entries anuwhere > What is "Kemp Roadmaster vm in .disk format"? Can you run this on the machine with this file? ls -l /path/to/disk Also this can help to understand the issue: qemu-img info /path/to/disk Nir > > Get Outlook for Android <https://aka.ms/ghei36> > > ------------------------------ > *From:* Shani Leviim <sleviim(a)redhat.com> > *Sent:* Tuesday, February 19, 2019 10:50:20 AM > *To:* Michael Blanchard > *Cc:* users; Nir Soffer; Daniel Erez > *Subject:* Re: [ovirt-users] Unable to upload images > > Also, can you please share the output of 'ls -l' executed on the image > you're trying to upload? > > > *Regards, * > > *Shani Leviim * > > > On Tue, Feb 19, 2019 at 3:52 PM Shani Leviim <sleviim(a)redhat.com> wrote: > >> Hi, >> Can you please share engine and UI logs? >> Also, can you please attach a screenshot? >> >> >> *Regards, * >> >> *Shani Leviim * >> >> >> On Tue, Feb 19, 2019 at 1:54 AM <michael(a)wanderingmad.com> wrote: >> >>> I just updated my ovirt to the latest, and now I can't upload images >>> that I used to be able to. I can upload and see the nagio xi virtual >>> appliance, but I can't upload .disk files anymore, I get a red error in GUI >>> and it say image file not supported, but I used to be able to upload same >>> file in previous version with no issue >>> _______________________________________________ >>> Users mailing list -- users(a)ovirt.org >>> To unsubscribe send an email to users-leave(a)ovirt.org >>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>> oVirt Code of Conduct: >>> https://www.ovirt.org/community/about/community-guidelines/ >>> List Archives: >>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/EM3RUQQ6NJ5SX… >>> >> This email and any files transmitted with it are confidential and > intended solely for the use of the individual or entity to whom they are > addressed. If you have received this email in error please notify the > system manager. This message contains confidential information and is > intended only for the individual named. If you are not the named addressee > you should not disseminate, distribute or copy this e-mail. Please notify > the sender immediately by e-mail if you have received this e-mail by > mistake and delete this e-mail from your system. If you are not the > intended recipient you are notified that disclosing, copying, distributing > or taking any action in reliance on the contents of this information is > strictly prohibited. >

3 3

Re: Creating a static route
by Lev Veyde 20 Feb '19

20 Feb '19

Hi Doug, Thanks for the update, I'm glad that we could help and everything worked out just fine! I also opened a BZ, asking to add a note in the documentation regarding this issue. Thanks in advance, On Mon, Feb 18, 2019 at 7:15 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> wrote: > Lev, > > Just wanted to update you on the progress. We created the persistent > static routes and rules and the data is routing correctly over the required > gateway. > > > > Thank you for all of your help!!! > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Thursday, February 14, 2019 9:14 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > Just one more thing that I forgot to mention, even though it may be > obvious - you can use subnets in both rules and routes. > > So if all the IPs you want to route sit in the same subnet then you can > contain them with a single command e.g. "to 172.22.20.0/24 priority 32764" > > Thanks in advance, > > > > On Thu, Feb 14, 2019 at 4:59 PM Lev Veyde <lveyde(a)redhat.com> wrote: > > Hi Doug, > > Sure, np. > > > > >> 1. - yes it is the priority setting of the specific rule. Basically you > put in the file the post "ip rule add" part of the command e.g. for "ip > rule add to 172.22.20.31 priority 32764" you need to put a line of "to > 172.22.20.31 priority 32764" > > >> 2. - yes, the same priority can be used for all of them. E.g. if you > want to route 172.22.20.31, 172.22.34.56 and 172.22.67.89 you will need to > add: > > to 172.22.20.31 priority 32764 > to 172.22.34.56 priority 32764 > to 172.22.67.89 priority 32764 > > into the rule-<interface name> file e.g. rule-ovirtmgmt or rule-eno3. > > > > Please note that you will also need to add the static route for each one > of these as well w/ "ip route add ... " command e.g. "ip route add > 172.22.20.31 via 172.21.12.61". > > You can also use the route-<interface name> putting just the route info > part, similar to the "ip rule" e.g. for equivalent of "ip route add > 172.22.20.31 via 172.21.12.61" you need put in the file a line with the > content "172.22.20.31 via 172.21.12.61". > > For routes it's important to use specifically the route-ovirtmgmt file > since the script automatically adds the device to the route command i.e. > you can put the following lines into your route-ovirtmgmt file: > > 172.22.20.31 via 172.21.12.61 > 172.22.34.56 via 172.21.12.61 > 172.22.67.89 via 172.21.12.68 > > (In case the first 2 of the mentioned IPs should be routed through the > 172.21.12.61 gateway, and the last one should be routed through the > 172.21.12.68 gateway). > > > > For the reference you can take a look at the > /etc/sysconfig/network-scripts/ifup-routes script. > It does the actual processing of both "route" and "rule" files for all > network interfaces on a system. > > > > Please feel free to contact if you have further questions. > > > > Thanks in advance, > > > > On Thu, Feb 14, 2019 at 3:39 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Thanks for the response. I was just getting ready to contact you about > this. I do have 2 follow-up questions, if you don’t mind. > > > > 1. When we were talking about creating the route that would be enabled > again after a reboot, you said to modify “the > /etc/sysconfig/network-scripts/rule-<interface name> e.g. rule-ovirtmgmt or > rule-eno3 (just put in the file "to 172.22.20.31 priority 32764”. Is > priority 32764 for the ip rule command? > 2. If I have multiple IPs that I would need to create a static route, > would the priority be 32764 for all of them? > > > > Once again, thank you for all of your help with this!! > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Thursday, February 14, 2019 3:19 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > Sorry that it took a bit of time to get back to you. > Managed to catch today somebody from the oVirt/RHV network team to discuss > the issue. > > It seems that we don't currently support custom static routes on the > hosts, so the workaround that I suggested is the way to do it. > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 11:12 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Will do. Thanks again for all your help!! Looking forward to a > confirmation of the fix or a different solution. Either way, I know I have > a working fix. > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 3:09 PM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > Just a small note - the commands in the rc.local should be placed *before* > the very last line (the touch ... command). > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 10:56 PM Lev Veyde <lveyde(a)redhat.com> wrote: > > Hi Doug, > > Thanks, you're welcome! > > It's generally possible to add persistent rules by either using the legacy > /etc/rc.d/rc.local boot script (chmod +x /etc/rc.d/rc.local and put the > relevant commands at the end of the file, that way you can actually run any > commands) or by using the /etc/sysconfig/network-scripts/rule-<interface > name> e.g. rule-ovirtmgmt or rule-eno3 (just put in the file "to > 172.22.20.31 priority 32764" - without quotes), however of course this > needs to be tested to verify that it works. > > I forwarded the issue to the network team and hopefully they will update > soon. > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 10:17 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > You have no idea how helpful you have been!!!!!! I’ve been having this > issue for over 2 months and starting to cause major problems. > > > > Please let me know if you find a better solution. I’m going to wait to > hear back from you before implementing. > > > > If we go with this workaround, is there a way to add the ip rule so it’s > persistent? I know how to make the ip route add persistent. > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 2:14 PM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > Yes, it looks like it did. > > I'll try to catch somebody from my local oVirt/RHV networking team to take > a look at this issue, maybe there is a better solution for that issue than > my workaround. > > > > But meanwhile you can use this workaround (ip route add + ip rule add), > just please be aware that these should be run after each host reboot, since > these commands are not persistent. > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 10:07 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Here’s the results. It appears to fix the issue!! > > > > From non-working system: > > > > -bash-4.2# ip rule add to 172.22.20.31 priority 32764 > > > > -bash-4.2# traceroute 172.22.20.31 > > traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets > > 1 CenteraAmesAN1.emcins.com (172.21.12.61) 0.487 ms 1.082 ms 1.313 ms > > 2 192.168.90.9 (192.168.90.9) 1.507 ms 2.090 ms 2.294 ms > > 3 pdputopcomm01.emcins.com (172.22.20.31) 1.403 ms 1.401 ms 1.348 ms > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 2:01 PM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > OK, I think that I have a guess of what may have happened here... > > Can you please run the following command on the (non-working) host: > > ip rule add to 172.22.20.31 priority 32764 > > > > This needs to be run in addition to the ip route add ... command. > > > > And then please run the traceroute command and let me know if that fixed > the issue. > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 9:30 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Here you go. > > > > From non-working system > > > > -bash-4.2# ip rule > > 0: from all lookup local > > 32764: from all to 172.21.0.0/16 iif ovirtmgmt lookup 2887058719 > > 32765: from 172.21.0.0/16 lookup 2887058719 > > 32766: from all lookup main > > 32767: from all lookup default > > > > > > From working system > > > > [root@paputopcomm04 ~]# ip rule > > 0: from all lookup local > > 32766: from all lookup main > > 32767: from all lookup default > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 12:35 PM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > That shouldn't really matter, since ovirtmgmt is just a bridged interface, > and unless I'm missing something it shouldn't really affect routing. > > Can you please also provide the output of "ip rule" from both working and > non-working hosts ? > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 8:01 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Here’s the ip route from the server that worked and didn’t work > > > > IP Route from server that worked > > > > [root@paputopcomm04 ~]# ip route > > default via 172.21.0.250 dev eno3 > > 169.254.0.0/16 dev eno3 scope link metric 1002 > > 169.254.0.0/16 dev eno4 scope link metric 1005 > > 172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.18 > > 172.21.0.0/16 dev eno3 proto kernel scope link src 172.21.5.34 > > *172.22.20.31 via 172.21.12.61 dev eno3* > > 172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.34 > > > > > > > > IP Route from server that didn't work > > > > -bash-4.2# ip route > > default via 172.21.0.250 dev ovirtmgmt > > 169.254.0.0/16 dev eno4 scope link metric 1004 > > 169.254.0.0/16 dev ovirtmgmt scope link metric 1021 > > 172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.15 > > 172.21.0.0/16 dev ovirtmgmt proto kernel scope link src 172.21.5.31 > > *172.22.20.31 via 172.21.12.61 dev ovirtmgmt* > > 172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.31 > > > > We have had our network team look and they don’t know. As I said, the was > setup by Commvault. It’s almost like the ovirtmgmt interface will not > allow a route add due to the way it’s configured? They, Commvault, are > trying different things within their software to get this working, but it’s > causing us more problems. I figured I would take a shot and see if > someone, who works with the oVirt software, would have any ideas. > > > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 11:51 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > This is indeed quite weird... > > It looks like the OS for some reason disregards the static route that you > have added. > > BTW, have you verified that it's indeed was added by running "ip route" > following the "ip route add ..." command ? > > Maybe somebody from the network team has an idea of what may be the cause > of this issue... > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 7:36 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > I’m showing you the same outputs (ip a, ip route, traceroute, ip route > add, and traceroute) from another server in this group that doesn’t use the > ovirtmgmt for it’s default interface. > > > > [root@paputopcomm04 ~]# ip a > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1 > > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > > inet 127.0.0.1/8 scope host lo > > valid_lft forever preferred_lft forever > > inet6 ::1/128 scope host > > valid_lft forever preferred_lft forever > > 2: eno3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen > 1000 > > link/ether 90:1b:0e:db:bc:c0 brd ff:ff:ff:ff:ff:ff > > inet 172.21.5.34/16 brd 172.21.255.255 scope global eno3 > > valid_lft forever preferred_lft forever > > inet6 fe80::921b:eff:fedb:bcc0/64 scope link > > valid_lft forever preferred_lft forever > > 3: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen > 1000 > > link/ether 90:1b:0e:e8:da:03 brd ff:ff:ff:ff:ff:ff > > inet 172.26.5.34/16 brd 172.26.255.255 scope global eno1 > > valid_lft forever preferred_lft forever > > inet6 fe80::921b:eff:fee8:da03/64 scope link > > valid_lft forever preferred_lft forever > > 4: eno2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN > qlen 1000 > > link/ether 90:1b:0e:e8:da:04 brd ff:ff:ff:ff:ff:ff > > 5: eno4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen > 1000 > > link/ether 90:1b:0e:db:bc:c1 brd ff:ff:ff:ff:ff:ff > > inet 172.17.53.18/16 brd 172.17.255.255 scope global eno4 > > valid_lft forever preferred_lft forever > > inet6 fe80::921b:eff:fedb:bcc1/64 scope link > > valid_lft forever preferred_lft forever > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# ip route > > default via 172.21.0.250 dev eno3 > > 169.254.0.0/16 dev eno3 scope link metric 1002 > > 169.254.0.0/16 dev eno4 scope link metric 1005 > > 172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.18 > > 172.21.0.0/16 dev eno3 proto kernel scope link src 172.21.5.34 > > 172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.34 > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# traceroute 172.22.20.31 > > traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets > > 1 ames-acc1-agg-1.emcins.com (172.21.0.246) 1.081 ms 1.816 ms 1.832 ms > > 2 192.168.200.30 (192.168.200.30) 0.639 ms 192.168.200.14 > (192.168.200.14) 1.063 ms 1.577 ms > > 3 192.168.200.101 (192.168.200.101) 3.110 ms ames-sw-wanrtr.emcins.com > (192.168.200.97) 3.191 ms 3.277 ms > > 4 192.168.100.26 (192.168.100.26) 4.146 ms 4.273 ms 4.394 ms > > 5 192.168.100.98 (192.168.100.98) 1.893 ms 2.364 ms 2.397 ms > > 6 192.168.100.50 (192.168.100.50) 5.707 ms 192.168.100.33 > (192.168.100.33) 5.134 ms 192.168.100.50 (192.168.100.50) 4.105 ms > > 7 pdputopcomm01.emcins.com (172.22.20.31) 1.359 ms 1.374 ms 1.351 ms > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# ip route add 172.22.20.31 via 172.21.12.61 > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# traceroute 172.22.20.31 > > traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets > > 1 CenteraAmesAN1.emcins.com (172.21.12.61) 6.184 ms 6.475 ms 6.686 ms > > 2 192.168.90.9 (192.168.90.9) 1.770 ms 1.979 ms 2.189 ms > > 3 pdputopcomm01.emcins.com (172.22.20.31) 1.405 ms * 1.354 ms > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 11:07 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > In most cases it should not be required, especially as my guess (again it > would be easier if you could post the output of the "ip a" and "ip route") > is that the eno1 is part of the ovirtmgmt bridge. > > What is the output of the "traceroute 172.22.20.31" that you get on the > host after you have added the static route? > > Thanks in advance, > > > > > > On Tue, Feb 12, 2019 at 6:58 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > One other question, since there are multiple enabled interfaces (ovirtmgmt > and eno1), do I need to specify an interface for the route add. > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 10:50 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > What do you mean by "static route is refused"? > > What is the error message(s) you see? > > > > Can you please try to add the route with the following command: > > ip route add 172.22.20.31 via 172.21.12.61 > > > > If that doesn't work, then please provide more details, i.e. what is the > exact error message(s) you see, the version of your OS and oVirt, output of > "ip a" and "ip route" on your host(s), so that it will be easier to help > you. > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 6:43 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Thanks for your response. > > > > If I attempt to manually add the route using route add: > > > > route add -net 172.22.20.31 netmask 255.255.255.255 gw 172.21.12.61 dev > ovirtmgmt > > > > This static route is refused and all traffic is routed over the default > gateway. > > > > But if I use a server that doesn’t use the ovirtmgmt interface and set the > same static route, the required data is routed correctly over that static > route. > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 10:34 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > What is the exact problem you are having while attempting to add a static > route on the hosts? > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 5:23 PM <doug.l.maxfield(a)emcins.com> wrote: > > Good Morning, > New to oVirt. We are using this with a backup solution from Commvault. > The issue that we are having is that we need to setup a static route for > specific data between 2 remote sites. The ovirtmgmt is configured with the > correct IP and gateway for the server. We need to route data over a > different gateway so that we don't "max out" the default network connection > between the 2 sites. Example below > > Ovirtmgmt IP - 172.21.5.31 > Gateway IP - 172.21.0.250 > > We need any traffic with a destination of 172.22.20.31(Remote site) to > route over this gateway, 172.21.12.61 > > There are multiple servers in this configuration. Servers that are not > using the ovirtmgmt interface for their default, we are able to route the > data. The only problem is with attempting to setup a different static > route on the ovirtmgmt interfaces. > > Thanks in advance for any help!!! > > Doug > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/WGXSLHAP3X5OT… > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > NOTICE: This message (including any attachments) is intended for a > specific individual and may contain information that is either confidential > or legally protected. If you believe that it has been sent to you in > error, please reply to the sender that you have received the message in > error, then delete it. If you are not the intended recipient, you are > hereby notified that any retention, dissemination, distribution, or copying > of this communication is strictly prohibited. Thank you. EMC071856 > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

3 4

Ovirt project source code download problem
by xilazz＠126.com 20 Feb '19

20 Feb '19

Hi,The dear. May I ask where I can find the source code of ovirt project? I want to test the environment through compilation and installation. At present, most of the methods are online installation, so I cannot modify some contents. Thank you very much for your help. Thank you very much.

3 3

How to upgrade ovirt node host?
by adam_xu＠adagene.com.cn 20 Feb '19

20 Feb '19

How, everyone. I have upgraded my engine from 4.2.8 to 4.3.0. but when I check upgrade for the node host, there's no updates available for upgrade. I checked the repo file in the host, two files available: /etc/yum.repos.d/ovirt-4.2.repo /etc/yum.repos.d/ovirt-4.2-dependencies.repo The documentation seems to be out of date. https://www.ovirt.org/documentation/upgrade-guide/chap-Updates_between_Mino… so How could I upgrade my node hosts to ovirt 4.3 ? yours Adam

5 6