March 2019 - Users - oVirt List Archives

Hosted engine Migration
by pollard＠tx.net 11 Mar '19

11 Mar '19

Am I reading these right in that manual migration is not possible?

1 0

Ovirt Node 4.3 Gluster Install adding bricks
by pollard＠tx.net 11 Mar '19

11 Mar '19

Sorry if this seems simple, but trial and error is how I learn. So the basics. I installed Node 4.3 on 3 hosts, and was following the setup for self-hosted engine. The setup fails when detecting peers and indicates that they are already part of a cluster. So i restart the install and choose the install engine on single node with Gluster. I now have all three nodes connected to ovirt engine, however my trouble is I am not understanding how to add the disk of the two nodes to the glusterFS. I also have some extra disks on my primary node I want to add. I believe it is as follows but I dont want to mess this up. Under Compute >> Hosts >> $HOSTNAME Select Storage Devices Select Disk in my case sde Then create brick? If this is the case Do I add it to a LV if so which one engine,data or vmstore? Do I repeat this for each hosts? I can duplicate the engine, data and vmstore on each one, but that will still leave me with two disks on each node without assignment If anyone can help that would be great. Thank you. Pollard

2 2

Re: "gluster-ansible-roles is not installed on Host" error on Cockpit
by Strahil 11 Mar '19

11 Mar '19

Check if you have a repo called sac-gluster-ansible. Best Regards, Strahil NikolovOn Mar 10, 2019 08:21, Hesham Ahmed <hsahmed(a)gmail.com> wrote: > > On a new 4.3.1 oVirt Node installation, when trying to deploy HCI > (also when trying adding a new gluster volume to existing clusters) > using Cockpit, an error is displayed "gluster-ansible-roles is not > installed on Host. To continue deployment, please install > gluster-ansible-roles on Host and try again". There is no package > named gluster-ansible-roles in the repositories: > > [root@localhost ~]# yum install gluster-ansible-roles > Loaded plugins: enabled_repos_upload, fastestmirror, imgbased-persist, > package_upload, product-id, search-disabled-repos, > subscription-manager, vdsmupgrade > This system is not registered with an entitlement server. You can use > subscription-manager to register. > Loading mirror speeds from cached hostfile > * ovirt-4.3-epel: mirror.horizon.vn > No package gluster-ansible-roles available. > Error: Nothing to do > Uploading Enabled Repositories Report > Cannot upload enabled repos report, is this client registered? > > This is due to check introduced here: > https://gerrit.ovirt.org/#/c/98023/1/dashboard/src/helpers/AnsibleUtil.js > > Changing the line from: > [ "rpm", "-qa", "gluster-ansible-roles" ], { "superuser":"require" } > to > [ "rpm", "-qa", "gluster-ansible" ], { "superuser":"require" } > resolves the issue. The above code snippet is installed at > /usr/share/cockpit/ovirt-dashboard/app.js on oVirt node and can be > patched by running "sed -i 's/gluster-ansible-roles/gluster-ansible/g' > /usr/share/cockpit/ovirt-dashboard/app.js && systemctl restart > cockpit" > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/243QJOXO2KTWY…

4 3

gdeployConfig.conf errors (Hyperconverged setup using GUI)
by adrianquintero＠gmail.com 11 Mar '19

11 Mar '19

Hello I am trying to run a Hyperconverged setup "COnfigure gluster storage and ovirt hosted engine", however I get the following error __________________________________________________________________________________________________ PLAY [gluster_servers] ********************************************************* TASK [Create LVs with specified size for the VGs] ****************************** failed: [ovirt01.grupokino.com] (item={u'lv': u'gluster_thinpool_sdb', u'size': u'45GB', u'extent': u'100%FREE', u'vg': u'gluster_vg_sdb'}) => {"changed": false, "item": {"extent": "100%FREE", "lv": "gluster_thinpool_sdb", "size": "45GB", "vg": "gluster_vg_sdb"}, "msg": "lvcreate: metadata/pv_map.c:198: consume_pv_area: Assertion `to_go <= pva->count' failed.\n", "rc": -6} to retry, use: --limit @/tmp/tmpwo4SNB/lvcreate.retry PLAY RECAP ********************************************************************* ovirt01.grupokino.com : ok=0 changed=0 unreachable=0 failed=1 __________________________________________________________________________________________________ I know that oVirt Hosted Engine Setup GUI for "gluster wizard (gluster deployment) does not populate the geodeployConfig.conf file properly (Generated Gdeploy configuration : /var/lib/ovirt-hosted-engine-setup/gdeploy/gdeployConfig.conf) so I have tried to modify it to fit our needs but keep getting the above error everytime. Any ideas or comments are welcome...Thanks! My servers are setup with 4x50GB disks, 1 for the OS and the rest for Gluster Hyperconverged setup. __________________________________________________________________________________________________ my gdeployConfig.conf file: __________________________________________________________________________________________________ #gdeploy configuration generated by cockpit-gluster plugin [hosts] ovirt01.mydomain.com ovirt02.mydomain.com ovirt03.mydomain.com [script1:ovirt01.mydomain.com] action=execute ignore_script_errors=no file=/usr/share/gdeploy/scripts/grafton-sanity-check.sh -d sdb,sdc,sdd -h ovirt01.mydomain.com, ovirt02.mydomain.com, ovirt03.mydomain.com [script1:ovirt02.mydomain.com] action=execute ignore_script_errors=no file=/usr/share/gdeploy/scripts/grafton-sanity-check.sh -d sdb,sdc,sdd -h ovirt01.mydomain.com, ovirt02.mydomain.com, ovirt03.mydomain.com [script1:ovirt03.mydomain.com] action=execute ignore_script_errors=no file=/usr/share/gdeploy/scripts/grafton-sanity-check.sh -d sdb,sdc,sdd -h ovirt01.mydomain.com, ovirt02.mydomain.com, ovirt03.mydomain.com [disktype] jbod [diskcount] 3 [stripesize] 256 [service1] action=enable service=chronyd [service2] action=restart service=chronyd [shell2] action=execute command=vdsm-tool configure --force [script3] action=execute file=/usr/share/gdeploy/scripts/blacklist_all_disks.sh ignore_script_errors=no [pv1:ovirt01.mydomain.com] action=create devices=sdb ignore_pv_errors=no [pv1:ovirt02.mydomain.com] action=create devices=sdb ignore_pv_errors=no [pv1:ovirt03.mydomain.com] action=create devices=sdb ignore_pv_errors=no [pv2:ovirt01.mydomain.com] action=create devices=sdc ignore_pv_errors=no [pv2:ovirt02.mydomain.com] action=create devices=sdc ignore_pv_errors=no [pv2:ovirt03.mydomain.com] action=create devices=sdc ignore_pv_errors=no [pv3:ovirt01.mydomain.com] action=create devices=sdd ignore_pv_errors=no [pv3:ovirt02.mydomain.com] action=create devices=sdd ignore_pv_errors=no [pv3:ovirt03.mydomain.com] action=create devices=sdd ignore_pv_errors=no [vg1:ovirt01.mydomain.com] action=create vgname=gluster_vg_sdb pvname=sdb ignore_vg_errors=no [vg1:ovirt02.mydomain.com] action=create vgname=gluster_vg_sdb pvname=sdb ignore_vg_errors=no [vg1:ovirt03.mydomain.com] action=create vgname=gluster_vg_sdb pvname=sdb ignore_vg_errors=no [vg2:ovirt01.mydomain.com] action=create vgname=gluster_vg_sdc pvname=sdc ignore_vg_errors=no [vg2:ovirt02.mydomain.com] action=create vgname=gluster_vg_sdc pvname=sdc ignore_vg_errors=no [vg2:ovirt03.mydomain.com] action=create vgname=gluster_vg_sdc pvname=sdc ignore_vg_errors=no [vg3:ovirt01.mydomain.com] action=create vgname=gluster_vg_sdd pvname=sdd ignore_vg_errors=no [vg3:ovirt02.mydomain.com] action=create vgname=gluster_vg_sdd pvname=sdd ignore_vg_errors=no [vg3:ovirt03.mydomain.com] action=create vgname=gluster_vg_sdd pvname=sdd ignore_vg_errors=no [lv1:ovirt01.mydomain.com] action=create poolname=gluster_thinpool_sdb ignore_lv_errors=no vgname=gluster_vg_sdb lvtype=thinpool size=45GB poolmetadatasize=3GB [lv2:ovirt02.mydomain.com] action=create poolname=gluster_thinpool_sdc ignore_lv_errors=no vgname=gluster_vg_sdc lvtype=thinpool size=45GB poolmetadatasize=3GB [lv3:ovirt03.mydomain.com] action=create poolname=gluster_thinpool_sdd ignore_lv_errors=no vgname=gluster_vg_sdd lvtype=thinpool size=45GB poolmetadatasize=3GB [lv4:ovirt01.mydomain.com] action=create lvname=gluster_lv_engine ignore_lv_errors=no vgname=gluster_vg_sdb mount=/gluster_bricks/engine size=42GB lvtype=thick [lv5:ovirt01.mydomain.com] action=create lvname=gluster_lv_data ignore_lv_errors=no vgname=gluster_vg_sdc mount=/gluster_bricks/data lvtype=thinlv poolname=gluster_thinpool_sdc virtualsize=42GB [lv6:ovirt01.mydomain.com] action=create lvname=gluster_lv_vmstore ignore_lv_errors=no vgname=gluster_vg_sdd mount=/gluster_bricks/vmstore lvtype=thinlv poolname=gluster_thinpool_sdd virtualsize=42GB [lv7:ovirt02.mydomain.com] action=create lvname=gluster_lv_engine ignore_lv_errors=no vgname=gluster_vg_sdb mount=/gluster_bricks/engine size=42GB lvtype=thick [lv8:ovirt02.mydomain.com] action=create lvname=gluster_lv_data ignore_lv_errors=no vgname=gluster_vg_sdc mount=/gluster_bricks/data lvtype=thinlv poolname=gluster_thinpool_sdc virtualsize=42GB [lv9:ovirt02.mydomain.com] action=create lvname=gluster_lv_vmstore ignore_lv_errors=no vgname=gluster_vg_sdd mount=/gluster_bricks/vmstore lvtype=thinlv poolname=gluster_thinpool_sdd virtualsize=42GB [lv10:ovirt03.mydomain.com] action=create lvname=gluster_lv_engine ignore_lv_errors=no vgname=gluster_vg_sdb mount=/gluster_bricks/engine size=42GB lvtype=thick [lv11:ovirt03.mydomain.com] action=create lvname=gluster_lv_data ignore_lv_errors=no vgname=gluster_vg_sdc mount=/gluster_bricks/data lvtype=thinlv poolname=gluster_thinpool_sdc virtualsize=42GB [lv12:ovirt03.mydomain.com] action=create lvname=gluster_lv_vmstore ignore_lv_errors=no vgname=gluster_vg_sdd mount=/gluster_bricks/vmstore lvtype=thinlv poolname=gluster_thinpool_sdd virtualsize=42GB [selinux] yes [service3] action=restart service=glusterd slice_setup=yes [firewalld] action=add ports=111/tcp,2049/tcp,54321/tcp,5900/tcp,5900-6923/tcp,5666/tcp,16514/tcp,54322/tcp services=glusterfs [script2] action=execute file=/usr/share/gdeploy/scripts/disable-gluster-hooks.sh [shell3] action=execute command=usermod -a -G gluster qemu [volume1] action=create volname=engine transport=tcp replica=yes replica_count=3 key=group,storage.owner-uid,storage.owner-gid,network.ping-timeout,performance.strict-o-direct,network.remote-dio,cluster.granular-entry-heal value=virt,36,36,30,on,off,enable brick_dirs=ovirt01.mydomain.com:/gluster_bricks/engine/engine,ovirt02.mydomain.com:/gluster_bricks/engine/engine,ovirt03.mydomain.com:/gluster_bricks/engine/engine ignore_volume_errors=no [volume2] action=create volname=data transport=tcp replica=yes replica_count=3 key=group,storage.owner-uid,storage.owner-gid,network.ping-timeout,performance.strict-o-direct,network.remote-dio,cluster.granular-entry-heal value=virt,36,36,30,on,off,enable brick_dirs=ovirt01.mydomain.com:/gluster_bricks/data/data,ovirt02.mydomain.com:/gluster_bricks/data/data,ovirt03.mydomain.com:/gluster_bricks/data/data ignore_volume_errors=no [volume3] action=create volname=vmstore transport=tcp replica=yes replica_count=3 key=group,storage.owner-uid,storage.owner-gid,network.ping-timeout,performance.strict-o-direct,network.remote-dio,cluster.granular-entry-heal value=virt,36,36,30,on,off,enable brick_dirs=ovirt01.mydomain.com:/gluster_bricks/vmstore/vmstore,ovirt02.mydomain.com:/gluster_bricks/vmstore/vmstore,ovirt03.mydomain.com:/gluster_bricks/vmstore/vmstore ignore_volume_errors=no ---------------------------------------------------------------------------------------------------

3 2

Re: Migrate HE between ISCSI storages
by Strahil 11 Mar '19

11 Mar '19

Is this the HostedEngine ? Best Regards, Strahil Nikolov

3 2

alertMessage, [Warning! Low confirmed free space on gluster volume M2Stick1]
by Robert O'Kane 11 Mar '19

11 Mar '19

Hello, With my first "in Ovirt" made Gluster Storage I am getting some annoying Warnings. On the Hypervisor(s) engine.log : 2019-03-05 13:07:45,281+01 INFO [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterVolumeAdvancedDetailsVDSCommand] (DefaultQuartzScheduler5) [59957167] START, GetGlusterVolumeAdvancedDetailsVDSCommand(HostName = Hausesel3, GlusterVolumeAdvancedDetailsVDSParameters:{hostId='d7db584e-03e3-4a37-abc7-73012a9f5ba8', volumeName='M2Stick1'}), log id: 74482de6 2019-03-05 13:07:46,814+01 INFO [org.ovirt.engine.core.bll.lock.InMemoryLockManager] (DefaultQuartzScheduler10) [6d40c5d0] Failed to acquire lock and wait lock 'EngineLock:{exclusiveLocks='[27f8ed93-c857-41ae-af16-e1af9f0b62d4=GLUSTER]', sharedLocks=''}' 2019-03-05 13:07:46,823+01 INFO [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterVolumeAdvancedDetailsVDSCommand] (DefaultQuartzScheduler5) [59957167] FINISH, GetGlusterVolumeAdvancedDetailsVDSCommand, return: org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeAdvancedDetails@868edb00, log id: 74482de6 I find no other correlated messages in the Gluster logs. Where else should I look? It (seems) to work very well. Just these "Warnings" which only worry me due to the "Failed to acquire lock" messages. This is one of 3 Gluster Storage Domains. The other 2 were "Hand made" and exist since Ovirt-3.5 and show no messages. 1x standalone engine 6x Hypervisors in 2 clusters. One other special condition: I am in the processes of moving my VM's to a second cluster (same Data Center) with a different defined Gluster Network. (New 10Gb cards). All Hypervisors see all Networks. but since there is only one SPM, the SPM is never a "Gluster Peer" of all Domains due to the "only one Gluster Network per Cluster" definition. Is this the Problem/Situation? There is another "Hand Made" Domain in the new Cluster but it does not have any problems. The only difference between the two is that the new Domain was created over the Ovirt Web interface. Cheers, Robert O'Kane engine: libgovirt-0.3.4-1.el7.x86_64 libvirt-bash-completion-4.5.0-10.el7_6.4.x86_64 libvirt-client-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-interface-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-network-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-nodedev-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-nwfilter-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-qemu-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-secret-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-core-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-disk-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-gluster-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-iscsi-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-logical-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-mpath-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-rbd-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-scsi-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-kvm-4.5.0-10.el7_6.4.x86_64 libvirt-glib-1.0.0-1.el7.x86_64 libvirt-libs-4.5.0-10.el7_6.4.x86_64 libvirt-python-4.5.0-1.el7.x86_64 ovirt-ansible-cluster-upgrade-1.1.10-1.el7.noarch ovirt-ansible-disaster-recovery-1.1.4-1.el7.noarch ovirt-ansible-engine-setup-1.1.6-1.el7.noarch ovirt-ansible-hosted-engine-setup-1.0.2-1.el7.noarch ovirt-ansible-image-template-1.1.9-1.el7.noarch ovirt-ansible-infra-1.1.10-1.el7.noarch ovirt-ansible-manageiq-1.1.13-1.el7.noarch ovirt-ansible-repositories-1.1.3-1.el7.noarch ovirt-ansible-roles-1.1.6-1.el7.noarch ovirt-ansible-shutdown-env-1.0.0-1.el7.noarch ovirt-ansible-v2v-conversion-host-1.9.0-1.el7.noarch ovirt-ansible-vm-infra-1.1.12-1.el7.noarch ovirt-cockpit-sso-0.0.4-1.el7.noarch ovirt-engine-4.2.8.2-1.el7.noarch ovirt-engine-api-explorer-0.0.2-1.el7.centos.noarch ovirt-engine-backend-4.2.8.2-1.el7.noarch ovirt-engine-cli-3.6.9.2-1.el7.centos.noarch ovirt-engine-dashboard-1.2.4-1.el7.noarch ovirt-engine-dbscripts-4.2.8.2-1.el7.noarch ovirt-engine-dwh-4.2.4.3-1.el7.noarch ovirt-engine-dwh-setup-4.2.4.3-1.el7.noarch ovirt-engine-extension-aaa-jdbc-1.1.7-1.el7.centos.noarch ovirt-engine-extension-aaa-ldap-1.3.8-1.el7.noarch ovirt-engine-extension-aaa-ldap-setup-1.3.8-1.el7.noarch ovirt-engine-extensions-api-impl-4.2.8.2-1.el7.noarch ovirt-engine-lib-4.2.8.2-1.el7.noarch ovirt-engine-metrics-1.1.8.1-1.el7.noarch ovirt-engine-restapi-4.2.8.2-1.el7.noarch ovirt-engine-sdk-python-3.6.9.1-1.el7.centos.noarch ovirt-engine-setup-4.2.8.2-1.el7.noarch ovirt-engine-setup-base-4.2.8.2-1.el7.noarch ovirt-engine-setup-plugin-ovirt-engine-4.2.8.2-1.el7.noarch ovirt-engine-setup-plugin-ovirt-engine-common-4.2.8.2-1.el7.noarch ovirt-engine-setup-plugin-vmconsole-proxy-helper-4.2.8.2-1.el7.noarch ovirt-engine-setup-plugin-websocket-proxy-4.2.8.2-1.el7.noarch ovirt-engine-tools-4.2.8.2-1.el7.noarch ovirt-engine-tools-backup-4.2.8.2-1.el7.noarch ovirt-engine-vmconsole-proxy-helper-4.2.8.2-1.el7.noarch ovirt-engine-webadmin-portal-4.2.8.2-1.el7.noarch ovirt-engine-websocket-proxy-4.2.8.2-1.el7.noarch ovirt-engine-wildfly-14.0.1-3.el7.x86_64 ovirt-engine-wildfly-overlay-14.0.1-3.el7.noarch ovirt-guest-agent-windows-1.0.14-1.el7.centos.noarch ovirt-host-deploy-1.7.4-1.el7.noarch ovirt-host-deploy-java-1.7.4-1.el7.noarch ovirt-imageio-common-1.4.6-1.el7.x86_64 ovirt-imageio-proxy-1.4.6-1.el7.noarch ovirt-imageio-proxy-setup-1.4.6-1.el7.noarch ovirt-image-uploader-4.0.1-1.el7.centos.noarch ovirt-iso-uploader-4.2.0-1.el7.centos.noarch ovirt-js-dependencies-1.2.0-3.1.el7.centos.noarch ovirt-log-collector-4.2.7-1.el7.noarch ovirt-log-collector-analyzer-4.2.7-1.el7.noarch ovirt-provider-ovn-1.2.18-1.el7.noarch ovirt-release40-4.0.6.1-1.noarch ovirt-release41-4.1.8-1.el7.centos.noarch ovirt-release41-4.1.9-1.el7.centos.noarch ovirt-release42-4.2.8-1.el7.noarch ovirt-setup-lib-1.1.5-1.el7.noarch ovirt-vmconsole-1.0.6-2.el7.noarch ovirt-vmconsole-proxy-1.0.6-2.el7.noarch ovirt-web-ui-1.4.5-1.el7.noarch python-ovirt-engine-sdk4-4.2.9-2.el7.x86_64 virtio-win-0.1.164-1.noarch virt-manager-1.5.0-1.el7.noarch virt-manager-common-1.5.0-1.el7.noarch virt-viewer-5.0-11.el7.x86_64 virt-what-1.18-4.el7.x86_64 Hypervisor: cockpit-machines-ovirt-176-4.el7.centos.noarch cockpit-ovirt-dashboard-0.11.38-1.el7.noarch collectd-virt-5.8.1-3.el7.x86_64 fence-virt-0.3.2-13.el7.x86_64 libvirt-4.5.0-10.el7_6.4.x86_64 libvirt-bash-completion-4.5.0-10.el7_6.4.x86_64 libvirt-client-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-config-network-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-config-nwfilter-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-interface-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-lxc-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-network-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-nodedev-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-nwfilter-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-qemu-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-secret-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-core-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-disk-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-gluster-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-iscsi-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-logical-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-mpath-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-rbd-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-scsi-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-kvm-4.5.0-10.el7_6.4.x86_64 libvirt-libs-4.5.0-10.el7_6.4.x86_64 libvirt-lock-sanlock-4.5.0-10.el7_6.4.x86_64 libvirt-python-4.5.0-1.el7.x86_64 ovirt-engine-sdk-python-3.6.9.1-1.el7.noarch ovirt-host-4.2.3-1.el7.x86_64 ovirt-host-dependencies-4.2.3-1.el7.x86_64 ovirt-host-deploy-1.7.4-1.el7.noarch ovirt-hosted-engine-ha-2.2.19-1.el7.noarch ovirt-hosted-engine-setup-2.2.33-1.el7.noarch ovirt-imageio-common-1.4.6-1.el7.x86_64 ovirt-imageio-daemon-1.4.6-1.el7.noarch ovirt-provider-ovn-driver-1.2.18-1.el7.noarch ovirt-release42-4.2.8-1.el7.noarch ovirt-setup-lib-1.1.5-1.el7.noarch ovirt-vmconsole-1.0.6-2.el7.noarch ovirt-vmconsole-host-1.0.6-2.el7.noarch python-ovirt-engine-sdk4-4.2.9-2.el7.x86_64 virt-install-1.5.0-1.el7.noarch virt-manager-common-1.5.0-1.el7.noarch virt-v2v-1.38.2-12.el7_6.1.x86_64 virt-what-1.18-4.el7.x86_64 -- Robert O'Kane Systems Administrator Kunsthochschule für Medien Köln Peter-Welter-Platz 2 50676 Köln fon: +49(221)20189-223 fax: +49(221)20189-49223

2 2

Unable to make Single Sign on working on Windows 7 Guest
by Felipe Herrera Martinez 11 Mar '19

11 Mar '19

On the case I'll be able to create an installer, what is the name of the Application need to be there, in order to ovirt detects that Ovirt Guest agent is installed? I have created an installer adding OvirtGuestService files and the Product Name to be shown, a part of the command line post installs.. I have tried with "ovirt-guest-agent" and "Ovirt guest agent" Names for the application installed on Windows 7 guest and even both are presented on ovirt VM Applications tab, on any case LogonVDScommand appears. There is other option to make it work now? Thanks in advance, Felipe

3 5

Re: [ovirt-users] Need VM run once api
by Chandrahasa S 11 Mar '19

11 Mar '19

This is a multipart message in MIME format. --=_alternative 00199D2865257E91_= Content-Type: text/plain; charset="US-ASCII" Can any one help on this. Thanks & Regards Chandrahasa S From: Chandrahasa S/MUM/TCS To: users(a)ovirt.org Date: 28-07-2015 15:20 Subject: Need VM run once api Hi Experts, We are integrating ovirt with our internal cloud. Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS. but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal. I believe we need to power ON vm using run once API, but we are not able get this API. Can some one help on this. I got reply on this query last time but unfortunately mail got deleted. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 00199D2865257E91_= Content-Type: text/html; charset="US-ASCII" Can any one help on this. Thanks & Regards Chandrahasa S From:        Chandrahasa S/MUM/TCS To:        users(a)ovirt.org Date:        28-07-2015 15:20 Subject:        Need VM run once api <hr noshade> Hi Experts, We are integrating ovirt with our internal cloud. Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS. but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal. I believe we need to power ON vm using run once API, but we are not able get this API. Can some one help on this. I got reply on this query last time but unfortunately mail got deleted. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 00199D2865257E91_=--

3 3

Re: [ovirt-users] Problem Windows guests start in pause
by Dafna Ron 11 Mar '19

11 Mar '19

Hi Lucas, Please send mails to the list next time. can you please do rpm -qa |grep qemu. also, can you try a different windows image? Thanks, Dafna On 07/14/2014 02:03 PM, lucas castro wrote: > On the host there I've tried to run the vm, I use a centOS 6.5 > and checked, no update for qemu, libvirt or related package. -- Dafna Ron

3 3

Failed to deploy ovirt engine with "hosted-engine --deploy"
by Bong Shau Fui 11 Mar '19

11 Mar '19

Hi: I'm new to ovirt. I followed the guide at the page https://www.ovirt.org/documentation/self-hosted/chap-Deploying_Self-Hosted_…, started to run "hosted-engine --deploy". It got stuck at the stage TASK [Get local VM IP] for about 5 minutes, and failed. Did a search but came out with nothing. From the log files these 2 lines are shown: 2018-07-25 19:59:11,269+0800 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:94 {u'_ansible_parsed': True, u'stderr_lines': [], u'cmd': u"virsh -r net-dhcp-leases default | grep -i 00:16:3e:5e:43:32 | awk '{ print $5 }' | cut -f1 -d'/'", u'end': u'2018-07-25 19:59:11.081420', u'_ansible_no_log': False, u'stdout': u'', u'changed': True, u'invocation': {u'module_args': {u'warn': True, u'executable': None, u'_uses_shell': True, u'_raw_params': u"virsh -r net-dhcp-leases default | grep -i 00:16:3e:5e:43:32 | awk '{ print $5 }' | cut -f1 -d'/'", u'removes': None, u'argv': None, u'creates': None, u'chdir': None, u'stdin': None}}, u'start': u'2018-07-25 19:59:10.949464', u'attempts': 50, u'stderr': u'', u'rc': 0, u'delta': u'0:00:00.131956', u'stdout_lines': []} 2018-07-25 19:59:11,370+0800 ERROR otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:98 fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "virsh -r net-dhcp-leases default | grep -i 00:16:3e:5e:43:32 | awk '{ print $5 }' | cut -f1 -d'/'", "delta": "0:00:00.131956", "end": "2018-07-25 19:59:11.081420", "rc": 0, "start": "2018-07-25 19:59:10.949464", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []} Can someone please enlighten me on what has happened? Many thanks in advance. regards, Bong SF

5 14