March 2019 - Users - oVirt List Archives

Migrate HE between ISCSI storages
by kiv＠intercom.pro 11 Mar '19

11 Mar '19

Hi all! oVirt 4.3.1. I have two ISCSI storages. Does anyone know how to transfer vm with HE from one to another?

1 0

OKD / Openshift under oVirt
by michael＠wanderingmad.com 10 Mar '19

10 Mar '19

I have ovirt currently running with 3 hyper-converged nodes, and loving it. I've had some issues with kubernetes and would prefer to try out openshift / OKD, but the trick is i'd like to do it in a fault-tolerant way, with a load balancer, 2 masters and 3 works, but I can't seem to find a good way to do it, is there anyone that can offer help? I tried using what was posted to the blog, but it was a single-node install and was never updated with part 2.

2 1

Re: error failed to execute stage 'misc configuration': failed to start service 'openvswitch'
by Dafna Ron 10 Mar '19

10 Mar '19

infra list is for infra issues only. forwarding to users group email which should be the correct address for your question. On Thu, Mar 7, 2019 at 9:05 PM <katiam(a)softel.cu> wrote: > I'm starting in the world of ovirt, so I would appreciate the help > I'm trying to install ovirt-engine and it gives me the following error > > error failed to execute stage 'misc configuration': failed to start > service 'openvswitch' > > Could someone guide me to find the solution? > _______________________________________________ > Infra mailing list -- infra(a)ovirt.org > To unsubscribe send an email to infra-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/infra@ovirt.org/message/CTIAQUY2ZXFPI… >

2 1

Timestamp offset in engine.log
by Ian Fraser 09 Mar '19

09 Mar '19

Hello, I am trying to follow the instructions for installing the metrics store and a prerequisite is ensuring the timestamps in /var/log/ovirt- engine/engine.log include a UTC offset (at bottom of this page: https://www.ovirt.org/documentation/metrics-install-guide/Introduction.html ). Mine currently do not (i.e. they look like "2019-03-07 14:14:23,223Z"). "timedatectl | grep -i 'time zone'" shows "Time zone: Europe/London (GMT, +0000)" Can anyone please tell me how to change this timestamp format to statisfy this prerequisite? Thanks Ian Fraser Systems Administrator | Agency Sector Management (UK) Limited | www.asm.org.uk[t] +44 (0)1784 242200 | [f] +44 (0)1784 242012 | [e] Ian.Fraser(a)asm.org.ukRegistered in England No. 2053849 | Registered address: Ashford House 41-45 Church Road Ashford Middx TW15 2TQFollow us on twitter @asmukltd

2 1

Re: Windows 10 - Ovirt 4.3 - EPYC
by Dominik Holler 09 Mar '19

09 Mar '19

On Fri, 1 Feb 2019 17:37:30 -0500 Darin Schmidt <darinschmidt(a)gmail.com> wrote: > [root@ovirt ~]# rpm -qa kernel > kernel-3.10.0-957.1.3.el7.x86_64 > kernel-3.10.0-862.el7.x86_64 > [root@ovirt ~]# uname -a > Linux ovirt 3.10.0-957.1.3.el7.x86_64 #1 SMP Thu Nov 29 14:49:43 UTC 2018 https://bugzilla.redhat.com/1638835 looks like there is at least kernel 3.10.0-957.3.1.el7.x86_64 required. Can you please check if upgrading to kernel solves the issue for you? I expectect at least kernel 3.10.0-957.5.1 to be availible. > x86_64 x86_64 x86_64 GNU/Linux > [root@ovirt ~]# rpm -qa qemu-kvm-ev > qemu-kvm-ev-2.12.0-18.el7_6.3.1.x86_64 > [root@ovirt ~]# rpm -qa libvirt > libvirt-4.5.0-10.el7_6.3.x86_64 > here is the vdsm > contains: Hyper-V SynIC is not supported by kernel > On Fri, Feb 1, 2019 at 3:05 PM Dominik Holler <dholler(a)redhat.com> > wrote: > > > On Fri, 1 Feb 2019 11:48:51 -0500 > > Darin Schmidt <darinschmidt(a)gmail.com> wrote: > > > > > I have successfully setup a centos vm, its up and running. Now I > > > need to setup a windows 10 VM and I cant seem to get anything to > > > work. > > > > > > Ive tried setting the OS type to other or Windows 10 64bit. With > > > Windows 64bit, it fails to startup at all.... When I select > > > OtherOS it will allow me to start to run the Windows ISO, but > > > then fails after a few seconds as well. Is there something I'm > > > not correctly configuring? > > > > Would you please share vdsm.log, and the output of > > rpm -qa kernel > > uname -a > > rpm -qa qemu-kvm-ev > > rpm -qa libvirt > > from of the host, and the relevant part of engine.log? > >

3 9

Re: Infiniband Usage / Support
by Douglas Duckworth 09 Mar '19

09 Mar '19

You can change the MTU in the network config in oVirt engine. The management portal. Go to clusters then networks or something like that. You can then modify the MTU. MTU can also be set manually in network scripts on the host but you need to define this in the engine. At least this is how I got Infiniband working. I can send screenshots on Monday. On Fri, Mar 8, 2019, 6:20 AM Andrey Rusakov <anrusakov(a)gmail.com<mailto:anrusakov@gmail.com>> wrote: Some details, step by step. Install OS, Install OFED, Create Bond for ib0 and ib1 - bond0 Set IP to bond0, and MTU to 65520. Add Host to oVirt Cluster At this moment of time everything is Fine. Next step. Assign New network to bond0, oVirt set MTU to 1500, and ... That is all. No storage, No IP. I can't change MTU to 2044 or 65520 and can't assign IP to IB interface. From system perspective i do understand why. oVirt Creates new bridge using brctl - and brctl didn't support IPoIB, but how can i change it back to original config? _______________________________________________ Users mailing list -- users(a)ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to users-leave(a)ovirt.org<mailto:users-leave@ovirt.org> Privacy Statement: https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ovirt.org_site_pri… oVirt Code of Conduct: https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ovirt.org_communit… List Archives: https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.ovirt.org_archiv…

1 0

Re: [ovirt-devel] ovirt and AMD virtualization bug
by Nir Soffer 09 Mar '19

09 Mar '19

On Sat, Mar 9, 2019 at 1:24 AM Hetz Ben Hamo <hetz(a)hetz.biz> wrote: > Hi, > > I've done some research on a bug which I found on the AMD Zen/Zen+ based > CPU's. Apparently, when using nested virtualization, the CPU doesn't expose > the "monitor" CPU flag. > > While other virtualization solutions (Xen, ESXi, Hyper-V) don't care about > this issue and let you run with nested without any problem, oVirt doesn't > let you launch or create any VM and it complains that this "monitor" CPU > flag is missing. > > Since QEMU/KVM cannot do anything about it, I was wondering if the ovirt > dev team could ignore this flag please. > Adding some people and relevant mailing lists. Nir

1 0

oVirt 4.3 and AMD Opteron G3 CPU
by Jiří Sléžka 09 Mar '19

09 Mar '19

Hi, I know, old AMD Opterons G3 are unsupported in oVirt 4.3 but anyway, is there a way to switch cluster to 4.3 mode with these old CPUs? On the other hand 4.2 mode is no problem, I just would like to test new stuff (on legacy hw ;-) Cheers, Jiri Slezka

1 0

Re: oVirt Performance (Horrific)
by Strahil 08 Mar '19

08 Mar '19

Hi Drew, During my tests on gluster v3, using 'disable.nfs: false' and using that as ovirt storage brought maximum performance for my 1 Gbit/s network. Can you try using NFS and if it works well, you can disable nfs and get NFS Ganesha up and running. It seems that FUSE in gluster v5 is performing way better, but still it is not the optimal solution. Best Regards, Strahil Nikolov

2 2

Re: error failed to execute stage 'misc configuration': failed to start service 'openvswitch'
by Strahil 08 Mar '19

08 Mar '19

This should work only for EL7 based systems. Find what provides it: yum whatprovides '*/openvswitch.service' Then check if it is installed: rpm -qa <replace with output of previous command> If not, install via 'yum install <replace with output of previous command>' Best Regards, Strahil Nikolov

2 1