- Users - oVirt List Archives

[Users] more useful repo to use right now?
by Gianluca Cecchi 21 Jan '13

21 Jan '13

Hello, I see that under http://resources.ovirt.org/releases/beta/rpm/Fedora/18 there are populated rpms. Does this mean 3.2 beta has been released? Where to find announcements in case for future? I presume if this is the case, it would be better to use them instead of nightly at this stage, correct? If I install beta, can I then "regularly" update to final 3.2 with the usual "engine-update" and so on? I'm going to test on Dell R310 (engine) and R815 (node) tomorrow, so I'm available to test what is best for the project. I'm going to test both on local storage and iSCSI EQL PS5000X thanks Gianluca

2 1

Re: [Users] mark VM to start on boot
by Roy Golan 21 Jan '13

21 Jan '13

This is a multi-part message in MIME format. --------------010204010309060805010107 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit On 01/20/2013 07:25 PM, Jim Kinney wrote: > > They are marked "highly available" but I thought that was for > migration only. I saw a database boolean but other than an update > command, I see no other way to boot on powerup. > your VMs probably failed to restart on your hosts. maybe storage isn't connected yet. check the engine.log > On Jan 20, 2013 1:38 AM, "Roy Golan" <rgolan(a)redhat.com > <mailto:rgolan@redhat.com>> wrote: > > On 01/18/2013 08:27 PM, Jim Kinney wrote: >> How do I mark a VM to startup if a node fails? >> >> 2 hosts in cluster, windows domain controller on one host, backup >> on second host. Both are marked high priority. >> "Bad Things" happen and both hosts get rebooted. I want those >> domain controllers to automatically restart. >> > are those VMs also marked as "Highly available" under High > Availability tab? >> I'm assuming the failure of the hosts did not knock down the >> manager. (I have them on separate floors, power, etc). >> -- >> -- >> James P. Kinney III >> //// >> ////Every time you stop a school, you will have to build a jail. >> What you gain at one end you lose at the other. It's like feeding >> a dog on his own tail. It won't fatten the dog. >> - Speech 11/23/1900 Mark Twain >> //// >> http://electjimkinney.org >> http://heretothereideas.blogspot.com/ >> //// >> >> >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org <mailto:Users@ovirt.org> >> http://lists.ovirt.org/mailman/listinfo/users > --------------010204010309060805010107 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: 7bit <html> <head> <meta content="text/html; charset=UTF-8" http-equiv="Content-Type"> </head> <body bgcolor="#FFFFFF" text="#000000"> <div class="moz-cite-prefix">On 01/20/2013 07:25 PM, Jim Kinney wrote: </div> <blockquote cite="mid:CAEo=5PxpxC7AmspcfvxdMjSmN3aP=FVEy-G_L_zvhq3ecX=e_Q@mail.gmail.com" type="cite"> They are marked "highly available" but I thought that was for migration only. I saw a database boolean but other than an update command, I see no other way to boot on powerup. </blockquote> your VMs probably failed to restart on your hosts. maybe storage isn't connected yet. check the engine.log <blockquote cite="mid:CAEo=5PxpxC7AmspcfvxdMjSmN3aP=FVEy-G_L_zvhq3ecX=e_Q@mail.gmail.com" type="cite"> <div class="gmail_quote">On Jan 20, 2013 1:38 AM, "Roy Golan" <<a moz-do-not-send="true" href="mailto:rgolan@redhat.com">rgolan(a)redhat.com</a>> wrote: <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> <div bgcolor="#FFFFFF" text="#000000"> <div>On 01/18/2013 08:27 PM, Jim Kinney wrote: </div> <blockquote type="cite">How do I mark a VM to startup if a node fails? 2 hosts in cluster, windows domain controller on one host, backup on second host. Both are marked high priority. "Bad Things" happen and both hosts get rebooted. I want those domain controllers to automatically restart. </blockquote> are those VMs also marked as "Highly available" under High Availability tab? <blockquote type="cite">I'm assuming the failure of the hosts did not knock down the manager. (I have them on separate floors, power, etc). -- -- James P. Kinney III Every time you stop a school, you will have to build a jail. What you gain at one end you lose at the other. It's like feeding a dog on his own tail. It won't fatten the dog. - Speech 11/23/1900 Mark Twain <a moz-do-not-send="true" href="http://electjimkinney.org" target="_blank">http://electjimkinney.org</a> <a moz-do-not-send="true" href="http://heretothereideas.blogspot.com/" target="_blank">http://heretothereideas.blogspot.com/</a> <fieldset></fieldset> <pre>_______________________________________________ Users mailing list <a moz-do-not-send="true" href="mailto:Users@ovirt.org" target="_blank">Users(a)ovirt.org</a> <a moz-do-not-send="true" href="http://lists.ovirt.org/mailman/listinfo/users" target="_blank">http://lists.ovirt.org/mailman/listinfo/users</a> </pre> </blockquote> </div> </blockquote> </div> </blockquote> </body> </html> --------------010204010309060805010107--

2 2

[Users] Storage domain does not exist & Error 477
by Joshua Dotson 21 Jan '13

21 Jan '13

Hi, I'm seeing the errors mentioned in the subject line with my new oVirt installation. I've tried to remove the metadata's checksum line and re-activate, to no avail. For background, please see: http://pastebin.com/raw.php?i=R2SH5ah8 I'm unable to detach and activate my ISO domain. Please advise. Thanks, Joshua -- Joshua Dotson Founder, Wrale Ltd

1 0

[Users] Planned outage :: resources.ovirt.org/lists.ovirt.org :: 2013-01-21 01:00 UTC
by Karsten 'quaid' Wade 21 Jan '13

21 Jan '13

This is an OpenPGP/MIME signed message (RFC 4880 and 3156) ------enig2QPOTWAJSDKQFRARSDTUF Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable There will be an outage of www.ovirt.org for approximately 45 minutes. The outage will occur at 2013-01-21 01:00 UTC. To view in your local time= : date -d '2013-01-21 01:00 UTC' I may start part of the outage 15 minutes before that. If you anticipate needing services until the outage window, reply back to me with details ASAP. =3D=3D Details =3D=3D We need to resize the Linode instance to get another 15 GB for storage until we can move services off the Linode permanently, as planned. This resizing should give us some breathing room. The account resize is estimated to take 30 minutes, during which time the Linode VM will be offline. After that, there will be a few minutes for reboot and restart of services, including the manual starting of the IRC bot 'ovirtbot'. The time window chosen coincides with the lowest CPU usage typically seen on any given day - 01:00 UTC tends to be very quiet for about an hour. Hopefully no one will even notice the downtime. If you have any services, such as Jenkins or Gerrit backup, that may go off during that window, you may want to retime it or be prepared for an error. =3D=3D Affected services =3D=3D * resources.ovirt.org ** meeting logs ** packages * lists.ovirt.org (MailMan) * ovirtbot * Gerrit backup (anacron may pick this up) * Other cronjobs (anacron may pick this up) =3D=3D Not-affected services =3D=3D * www.ovirt.org (MediaWiki) * jenkins.ovirt.org * gerrit.ovirt.org * alterway{01,02}.ovirt.org --=20 Karsten 'quaid' Wade, Sr. Analyst - Community Growth http://TheOpenSourceWay.org .^\ http://community.redhat.com @quaid (identi.ca/twitter/IRC) \v' gpg: AD0E0C41 ------enig2QPOTWAJSDKQFRARSDTUF Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.13 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iD8DBQFQ/C5s2ZIOBq0ODEERAielAKCYj7E23olhFjrftzhIdMey/n4k9QCdG4MR ILrAtGG53Wnn545S12rdacI= =C+px -----END PGP SIGNATURE----- ------enig2QPOTWAJSDKQFRARSDTUF--

1 1

[Users] Attaching an existing KVM installation to oVirt
by Eric_E_Smith＠DELL.com 21 Jan '13

21 Jan '13

Hello - I'm new to the list and thought I would send my first email. Is there a way to attach an existing KVM installation (Non Fedora - non node based installation of say, CentOS or Ubuntu) to oVirt? Thanks in advance, Eric

3 2

[Users] UI Plugin - Shell-In-A-Box
by Daniel Erez 20 Jan '13

20 Jan '13

Hi all, I've created a new UI plugin to the WebAdmin for making ssh connections to hosts using a web based AJAX terminal emulator. Details, explanations and screenshots on my blog: http://derezvir.blogspot.co.il/2013/01/ovirt-webadmin-shellinabox-ui-plugin… Please feel free to comment/contact me if you find it useful or have any trouble installing it... :) Regards, Daniel

2 1

[Users] Storage domain weirdness (or design)
by Alex Leonhardt 20 Jan '13

20 Jan '13

Hi, I see a strange behaviour - Setup: 1 ovirtmgmt / ovirt-engine hsot 2 ovirt nodes / HVs 2 storage domains in same cluster & DC HV1 => storage domain 1 (master) HV2 => storage domain 2 Issue: When I create a host with say ~40GB disk to be on HV2/storage_domain_2, it does that via HV1 ? Why is that ? I realize a storage domain is "attached to the cluster/dc", however, when creating the VM I explicitly seleted to only run on HV2, so why would it still create the disk via HV1 ? The mgmt network (for now) is only just that, a mgmt network, not meant to create 40 GB disks (dd from /dev/null) over NFS .. it's currently only a 100mbit switch Question: How, if at all, can I make Ovirt create the Disk from the host where it's meant to run on ? Thanks, Alex -- | RHCE | Senior Systems Engineer | www.vcore.co | www.vsearchcloud.com |

2 7

[Users] mark VM to start on boot
by Jim Kinney 20 Jan '13

20 Jan '13

How do I mark a VM to startup if a node fails? 2 hosts in cluster, windows domain controller on one host, backup on second host. Both are marked high priority. "Bad Things" happen and both hosts get rebooted. I want those domain controllers to automatically restart. I'm assuming the failure of the hosts did not knock down the manager. (I have them on separate floors, power, etc). -- -- James P. Kinney III * *Every time you stop a school, you will have to build a jail. What you gain at one end you lose at the other. It's like feeding a dog on his own tail. It won't fatten the dog. - Speech 11/23/1900 Mark Twain * http://electjimkinney.org http://heretothereideas.blogspot.com/ *

2 1

[Users] Move virtual hard disk images between hosts - Howto
by Adrian Gibanel 19 Jan '13

19 Jan '13

------=_Part_211_15072353.1358593952028 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable Hi,=20 I've written a howto on how to move, a better name would be to copy, virtua= l hard disk images between hosts.=20 It has been useful for me in the scenario where I need to move them between= different datacenters. I still don't understand the formal ways you have t= o move hard disks between hosts of the same/different data resource, cluste= r and datacenters so I do it manually.=20 Anyways I wanted you to take a look at it:=20 http://www.ovirt.org/User:Adrian15/Virtual_Machines_Images_Raw_Management= =20 And tell me:=20 * When it would work, when not.=20 * Pieces of advice.=20 * And if I'm missing something like, I don't know, having to edit some valu= es at the database.=20 I think that it will be also useful for some kind of restore on disaster sc= enarios although I'm not sure.=20 I've also used some tricks to deal with sparse files without having to wait= for ages.=20 --=20 Adri=C3=A1n Gibanel=20 I.T. Manager=20 +34 675 683 301=20 www.btactic.com=20 Ens podeu seguir a/Nos podeis seguir en:=20 i=20 Abans d=C2=B4imprimir aquest missatge, pensa en el medi ambient. El medi am= bient =C3=A9s cosa de tothom. / Antes de imprimir el mensaje piensa en el m= edio ambiente. El medio ambiente es cosa de todos.=20 AVIS:=20 El contingut d'aquest missatge i els seus annexos =C3=A9s confidencial. Si = no en sou el destinatari, us fem saber que est=C3=A0 prohibit utilitzar-lo,= divulgar-lo i/o copiar-lo sense tenir l'autoritzaci=C3=B3 corresponent. Si= heu rebut aquest missatge per error, us agrairem que ho feu saber immediat= ament al remitent i que procediu a destruir el missatge .=20 AVISO:=20 El contenido de este mensaje y de sus anexos es confidencial. Si no es el d= estinatario, les hacemos saber que est=C3=A1 prohibido utilizarlo, divulgar= lo y/o copiarlo sin tener la autorizaci=C3=B3n correspondiente. Si han reci= bido este mensaje por error, les agradecer=C3=ADamos que lo hagan saber inm= ediatamente al remitente y que procedan a destruir el mensaje .=20 ------=_Part_211_15072353.1358593952028 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><head><style type=3D'text/css'>p { margin: 0; }</style></head><body><= div style=3D'font-family: arial,helvetica,sans-serif; font-size: 10pt; colo= r: #000000'>Hi,   I've written a howto on how to move, a better= name would be to copy, virtual hard disk images between hosts. It has b= een useful for me in the scenario where I need to move them between differe= nt datacenters. I still don't understand the formal ways you have to move h= ard disks between hosts of the same/different  data resource, cluster = and datacenters so I do it manually.   Anyways I wanted you to = take a look at it: http://www.ovirt.org/User:Adrian15/Virtual_Machin= es_Images_Raw_Management And tell me: * When it would work, when = not. * Pieces of advice. * And if I'm missing something like, I don't= know, having to edit some values at the database. I think that it w= ill be also useful for some kind of restore on disaster scenarios although = I'm not sure. I've also used some tricks to deal with sparse files w= ithout having to wait for ages. -- <div>= <a style=3D"color: rgb(0, 0, = 0);" href=3D"http://www.btactic.com/"></font= ></a>Adri=C3=A1n Gibanel I= .T. Manager +34 675 683 301 <a href=3D"http://btactic.com/">www.b= tactic.com</a> <img src=3D"http://www.btactic.com/signaturabtacti= cmail/btacticsignature.png" style=3D"border-width: 0px;"> Ens podeu seguir a/Nos podeis seguir en: <a href=3D"http://www.facebook.com/pages/btactic/118651634826= 400?v=3Dapp_9953271133"><img style=3D"border: 0pt none;" src=3D"http://www.= btactic.com/wp-content/themes/btactic/img/facebookfoot.jpg"></a> i <a href= =3D"http://twitter.com/btactic"><img style=3D"border: 0pt none;" src=3D"htt= p://www.btactic.com/wp-content/themes/btactic/img/twitterfoot.jpg"></a></sp= an> </f= ont><div>Abans d=C2=B4imp= rimir aquest missatge, pensa en el medi ambient. El medi ambient =C3=A9s cosa de= =20 tothom. / Antes de imprimir el mensaje piensa en el medio ambiente. El medio=20 ambiente es cosa de todos. = AVIS: El contingut d'aquest missatge i els seus annexos =C3=A9s confidencial. Si = no en sou el destinatari, us fem saber que est=C3=A0 prohibit utilitzar-lo,=20 divulgar-lo i/o copiar-lo sense tenir l'autoritzaci=C3=B3 corresponent. Si heu rebut=20 aquest missatge per error, us agrairem que ho feu saber immediatament al remitent i que procediu a destruir el missatge. AVISO: El contenido de este mensaje y de sus anexos es confidencial. Si no es el destinatario, les hacemos saber que est=C3=A1 prohibido utilizarlo,=20 divulgarlo y/o copiarlo sin tener la autorizaci=C3=B3n correspondiente. Si han recibid= o este mensaje por error, les agradecer=C3=ADamos que lo hagan saber=20 inmediatamente al remitente y que procedan= a destruir el mensaje. </div> </div></div></body></html> ------=_Part_211_15072353.1358593952028--

1 0

Re: [Users] Thin provisioning extending while "Make template" still a bug?
by Maor Lipchuk 19 Jan '13

19 Jan '13

Hi Adrian, Sorry for the late respond. Please see inline comments, and feel free if there are any more questions, or other issues which you want us to address to. p.s. Since some of the responds were in different threads, I gathered all of them to this email. > 3) About the attached logs the virtual machine made from template was > finally made at: > 2012/12/22 17:21 > Logs are from 16:17 to 17:21 aproximately and I might reuse them to > ask why it takes so long to make the virtual machine while checking > the storage image at /home/storage (its size) it would seem that the > copy has finished. > I think that the "Make vm from template" task started about 30 > minutes or 40 minutes before it being finished. Well, that's the > average time it takes for me. Since you are creating a server the default behaviour is to clone your disks, which means engine calls copyImage to the SPM. >From what I saw in the logs your template have two disks, which one of them is 1920 GB, this is why it took 30 minutes to copy it. If you want your copy to be faster, you can change the default in the resource allocation tab to use thin instead of clone when you add a new server. although, take in notice that when you will use thin provisioning, the server will be based on the template and you will not be able to remove the template until the VM will be removed. On 12/25/2012 09:34 PM, Adrian Gibanel wrote:> I've described the "Create template from VM" extending bug (the one I > was told in irc) but I've attached the "Create VM from template" logs. > > If there's also a bug about "Create VM from template" being extended > then it's useful. > If it's not I'll try to recreate a "Create template from VM" task and > attach the logs. > > Sorry about the confusion. If you can still reproduce this scenario when you create a template with wrong provisioning, please attach the logs of it. On 12/24/2012 01:51 AM, Adrian Gibanel wrote:> I've just noticed that I made a typo. > This is the right template disk allocation policy table > (The fix is that second hard disk is preallocated instead of being Thin Prov) > > Alias | Virtual Size | Allocation | Target > First | 1920 GB | Thin Prov | local_storage > Seco | 1 GB | Preallocat | local_storage I took a look in your logs, and it seems that when you create a VM from template the passing arguments are preallocated for one image and sparse for the other, so it seems that this is fit with the allocation policy table you sent. > > ----- Mensaje original ----- > >> De: "Adrian Gibanel" <adrian.gibanel(a)btactic.com> >> Para: "users" <users(a)ovirt.org> >> Enviados: Lunes, 24 de Diciembre 2012 0:45:24 >> Asunto: Re: [Users] Thin provisioning extending while "Make template" >> still a bug? > >> 1) So... the mentioned bug does exist or am I just experiencing a >> normal oVirt usage (Making a vm from template with thin provisioning >> works ok without extending)? > >> 2) About template disk allocation policy... > >> When I create a new server based on template and I click on: >> Resource Allocation tab: > >> Template Provisioning: Clone > >> Alias | Virtual Size | Allocation | Target >> First | 1920 GB | Thin Prov | local_storage >> Seco | 1 GB | Thin Prov | local_storage > Regards, Maor

2 1