August 2020 - Announce - Ovirt List Archives

[ANN] oVirt 4.4.2 Fifth Release Candidate is now available for testing

by Lev Veyde

oVirt 4.4.2 Fifth Release Candidate is now available for testing The oVirt Project is pleased to announce the availability of oVirt 4.4.2 Fifth Release Candidate for testing, as of August 27th, 2020. This update is the second in a series of stabilization updates to the 4.4 series. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. Installation instructions For installation instructions and additional information please refer to: https://ovirt.org/documentation/ This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.2 or newer * CentOS Linux (or similar) 8.2 or newer This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.2 or newer * CentOS Linux (or similar) 8.2 or newer * oVirt Node 4.4 based on CentOS Linux 8.2 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.2 release highlights: http://www.ovirt.org/release/4.4.2/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.2/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

4 years, 3 months

1
0
0 / 0

[ANN] oVirt 4.4.2 Fourth Release Candidate is now available for testing

by Lev Veyde

oVirt 4.4.2 Fourth Release Candidate is now available for testing The oVirt Project is pleased to announce the availability of oVirt 4.4.2 Fourth Release Candidate for testing, as of August 20th, 2020. This update is the second in a series of stabilization updates to the 4.4 series. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. Installation instructions For installation instructions and additional information please refer to: https://ovirt.org/documentation/ This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.2 or newer * CentOS Linux (or similar) 8.2 or newer This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.2 or newer * CentOS Linux (or similar) 8.2 or newer * oVirt Node 4.4 based on CentOS Linux 8.2 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.2 release highlights: http://www.ovirt.org/release/4.4.2/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.2/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

4 years, 4 months

1
0
0 / 0

[ANN] oVirt 4.4.2 Third Release Candidate is now available for testing

by Lev Veyde

oVirt 4.4.2 Third Release Candidate is now available for testing The oVirt Project is pleased to announce the availability of oVirt 4.4.2 Third Release Candidate for testing, as of August 13th, 2020. This update is the second in a series of stabilization updates to the 4.4 series. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. Installation instructions For installation instructions and additional information please refer to: https://ovirt.org/documentation/ This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.2 or newer * CentOS Linux (or similar) 8.2 or newer This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.2 or newer * CentOS Linux (or similar) 8.2 or newer * oVirt Node 4.4 based on CentOS Linux 8.2 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.2 release highlights: http://www.ovirt.org/release/4.4.2/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.2/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

4 years, 4 months

1
0
1 / 0

Deep dive - oVirt metrics with DWH and Grafana

by Sandro Bonazzola

The oVirt project is pleased to invite you to ShirlyRadco's deep dive session on oVirt metrics with DWH and Grafana in tomorrow, August 10th 2020, premiere on YouTube at https://www.youtube.com/watch?v=8_JMIlJJ8yc&feature=youtu.be Regards, -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

4 years, 4 months

1
0
0 / 0

[ANN] oVirt 4.4.2 Second Release Candidate is now available for testing

by Lev Veyde

oVirt 4.4.2 Second Release Candidate is now available for testing The oVirt Project is pleased to announce the availability of oVirt 4.4.2 Second Release Candidate for testing, as of August 6th, 2020. This update is the second in a series of stabilization updates to the 4.4 series. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. Installation instructions For the engine: either use appliance or: - Install CentOS Linux 8.2 minimal from: https://mirrors.edge.kernel.org/centos/8.2.2004/isos/x86_64/CentOS-8.2.20... - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - dnf module enable -y javapackages-tools pki-deps postgresql:12 - dnf install ovirt-engine - engine-setup For the nodes: Either use oVirt Node ISO or: - Install CentOS Linux 8.2 from https://mirrors.edge.kernel.org/centos/8.2.2004/isos/x86_64/CentOS-8.2.20... ; select minimal installation - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - Attach the host to the engine and let it be deployed. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.2 or newer * CentOS Linux (or similar) 8.2 or newer This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.2 or newer * CentOS Linux (or similar) 8.2 or newer * oVirt Node 4.4 based on CentOS Linux 8.2 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.2 release highlights: http://www.ovirt.org/release/4.4.2/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.2/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

4 years, 4 months

1
0
0 / 0

Subject: [ANN] Updated oVirt release 4.4.1.5

by Lev Veyde

The oVirt Team has just released a new version of oVirt Node package that fixes oVirt Hyperconverged deployment related issue: Bug 1862588 <https://bugzilla.redhat.com/show_bug.cgi?id=1862588> - Update to gluster-7.7 with ovirt-ng node 4.4.1 Updated ovirt-node-ng-installer had been built and a new torrent for this ISO is now available at https://resources.ovirt.org/pub/ovirt-4.4/iso/ovirt-node-ng-installer/4.4... Relevant changes compared to previous version: - Gluster 7.7: https://docs.gluster.org/en/latest/release-notes/7.7/ - Ansible 2.9.11: https://github.com/ansible/ansible/blob/stable-2.9/changelogs/CHANGELOG-v... - Boot Hole vulnerability in grub2 (CVE-2020-1073) fix: https://blog.centos.org/2020/08/centos-community-newsletter-august-2020-2... -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

4 years, 4 months

1
0
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Announce August 2020