- Announce - oVirt List Archives

[Feedback needed] oVirt 4.4.0 Test week
by Sandro Bonazzola 08 May '20

08 May '20

Hi, oVirt team is planning to release oVirt 4.4.0 Ga in the next couple of weeks. oVirt 4.4.0 release candidate was released yesterday and we'd like to gather as much feedback as possible. Please join us testing this release candidate next week, starting Sunday May 10th 2020 till Friday May 15th 2020! We are going to coordinate the testing effort with a public Trello board at https://trello.com/b/5ZNJgPC3/ovirt-440-test-day You'll find instructions on how to use the board there. For joining the board you can use this link: https://trello.com/invite/b/5ZNJgPC3/f1b1826ee4902f348c44607765a15099/ovirt… If you have not an environment dedicated to testing, remember you can set up a few VMs and test the deployment with nested virtualization using your production environment creating a virtual test environment. In this case please be careful avoiding touching the production environment from the testing one. The oVirt team will monitor the Trello board, the #ovirt IRC channel on irc.oftc.net server and the users(a)ovirt.org mailing list to assist with the testing and debugging issues. Basic instructions for setting up a minimal system are available in release candidate announce at: https://lists.ovirt.org/archives/list/announce@ovirt.org/message/3QORBKVKTA… Release notes for this release candidate are available here: https://ovirt.org/release/4.4.0/ Thanks -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> [image: |Our code is open_] <https://www.redhat.com/en/our-code-is-open> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

1 0

[ANN] oVirt 4.3.10 Third Release Candidate is now available for testing
by Lev Veyde 07 May '20

07 May '20

The oVirt Project is pleased to announce the availability of oVirt 4.3.10 Third Release Candidate for testing as of May 6th, 2020. This update is the tenth in a series of stabilization updates to the 4.3 series. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.7 or later (but < 8) * CentOS Linux (or similar) 7.7 or later (but < 8) This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.7 or later (but < 8) * CentOS Linux (or similar) 7.7 or later (but < 8) * oVirt Node 4.3 (available for x86_64 only) See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Node is already available[2] Additional Resources: * Read more about the oVirt 4.3.10 release highlights: http://www.ovirt.org/release/4.3.10/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.10/ [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

oVirt 4.4.0 First Release Candidate is now available for testing!
by Sandro Bonazzola 07 May '20

07 May '20

The oVirt Project is excited to announce the availability of the first Release Candidate of oVirt 4.4.0 for testing, as of May 6th, 2020 This release unleashes an altogether more powerful and flexible open source virtualization solution that encompasses hundreds of individual changes and a wide range of enhancements across the engine, storage, network, user interface, and analytics on top of oVirt 4.3. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not to be used in production. Some of the features included in oVirt 4.4.0 Release Candidate require content that will be available in CentOS Linux 8.2 but can’t be tested on RHEL 8.2 beta yet due to some incompatibility in openvswitch package shipped in CentOS Virt SIG which requires to rebuild openvswitch on top of CentOS 8.2. Installation instructions For the engine: either use appliance or: - Install CentOS Linux 8 minimal from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - dnf module enable -y javapackages-tools pki-deps postgresql:12 - dnf install ovirt-engine - engine-setup For the nodes: Either use oVirt Node ISO or: - Install CentOS Linux 8 from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… ; select minimal installation - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - Attach the host to engine and let it be deployed. What’s new in oVirt 4.4.0 Release Candidate? - Hypervisors based on CentOS Linux 8 (rebuilt from award winning RHEL8), for both oVirt Node and standalone CentOS Linux hosts - Easier network management and configuration flexibility with NetworkManager - VMs based on a more modern Q35 chipset with legacy seabios and UEFI firmware - Support for direct passthrough of local host disks to VMs - Live migration improvements for High Performance guests. - New Windows Guest tools installer based on WiX framework now moved to VirtioWin project - Dropped support for cluster level prior to 4.2 - Dropped SDK3 support - 4K disks support only for file based storage. iSCSI/FC storage do not support 4k disks yet. - Exporting a VM to a data domain - Editing of floating disks - Integrating ansible-runner into engine, which allows a more detailed monitoring of playbooks executed from engine - Adding/reinstalling hosts are now completely based on Ansible - The OpenStack Neutron Agent cannot be configured by oVirt anymore, it should be configured by TripleO instead This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.1 * CentOS Linux (or similar) 8.1 This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.1 * CentOS Linux (or similar) 8.1 * oVirt Node 4.4 based on CentOS Linux 8.1 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. If you manage more than one oVirt instance, OKD or RDO we also recommend to try ManageIQ <http://manageiq.org/>. In such a case, please be sure to take the qc2 image and not the ova image. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.0 release highlights: http://www.ovirt.org/release/4.4.0/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.0/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> [image: |Our code is open_] <https://www.redhat.com/en/our-code-is-open> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

1 0

[ANN] oVirt 4.3.10 Second Release Candidate is now available for testing
by Lev Veyde 28 Apr '20

28 Apr '20

The oVirt Project is pleased to announce the availability of oVirt 4.3.10 Second Release Candidate for testing as of April 28th, 2020. This update is the tenth in a series of stabilization updates to the 4.3 series. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.7 or later (but < 8) * CentOS Linux (or similar) 7.7 or later (but < 8) This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.7 or later (but < 8) * CentOS Linux (or similar) 7.7 or later (but < 8) * oVirt Node 4.3 (available for x86_64 only) See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Node is already available[2] Additional Resources: * Read more about the oVirt 4.3.10 release highlights: http://www.ovirt.org/release/4.3.10/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.10/ [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

[ANN] oVirt 4.3.10 First Release Candidate is now available for testing
by Lev Veyde 24 Apr '20

24 Apr '20

The oVirt Project is pleased to announce the availability of oVirt 4.3.10 First Release Candidate for testing as of April 25th, 2020. This update is the tenth in a series of stabilization updates to the 4.3 series. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.7 or later (but < 8) * CentOS Linux (or similar) 7.7 or later (but < 8) This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.7 or later (but < 8) * CentOS Linux (or similar) 7.7 or later (but < 8) * oVirt Node 4.3 (available for x86_64 only) See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Node is already available[2] Additional Resources: * Read more about the oVirt 4.3.10 release highlights: http://www.ovirt.org/release/4.3.10/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.10/ [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

oVirt 4.4.0 Beta release refresh is now available for testing
by Sandro Bonazzola 17 Apr '20

17 Apr '20

oVirt 4.4.0 Beta release refresh is now available for testing The oVirt Project is excited to announce the availability of the beta release of oVirt 4.4.0 refresh (beta 4) for testing, as of April 17th, 2020 This release unleashes an altogether more powerful and flexible open source virtualization solution that encompasses hundreds of individual changes and a wide range of enhancements across the engine, storage, network, user interface, and analytics on top of oVirt 4.3. Important notes before you try it Please note this is a Beta release. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not to be used in production. In particular, please note that upgrades from 4.3 and future upgrades from this beta to the final 4.4 release from this version are not supported. Some of the features included in oVirt 4.4.0 Beta require content that will be available in CentOS Linux 8.2 but can’t be tested on RHEL 8.2 beta yet due to some incompatibility in openvswitch package shipped in CentOS Virt SIG which requires to rebuild openvswitch on top of CentOS 8.2. Known Issues - ovirt-imageio development is still in progress. In this beta you can’t upload images to data domains using the engine web application. You can still copy iso images into the deprecated ISO domain for installing VMs or upload and download to/from data domains is fully functional via the REST API and SDK. For uploading and downloading via the SDK, please see: - https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/upload_d… - https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/download… Both scripts are standalone command line tool, try --help for more info. Installation instructions For the engine: either use appliance or: - Install CentOS Linux 8 minimal from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - dnf module enable -y javapackages-tools pki-deps postgresql:12 - dnf install ovirt-engine - engine-setup For the nodes: Either use oVirt Node ISO or: - Install CentOS Linux 8 from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… ; select minimal installation - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - Attach the host to engine and let it be deployed. What’s new in oVirt 4.4.0 Beta? - Hypervisors based on CentOS Linux 8 (rebuilt from award winning RHEL8), for both oVirt Node and standalone CentOS Linux hosts - Easier network management and configuration flexibility with NetworkManager - VMs based on a more modern Q35 chipset with legacy seabios and UEFI firmware - Support for direct passthrough of local host disks to VMs - Live migration improvements for High Performance guests. - New Windows Guest tools installer based on WiX framework now moved to VirtioWin project - Dropped support for cluster level prior to 4.2 - Dropped SDK3 support - 4K disks support only for file based storage. iSCSI/FC storage do not support 4k disks yet. - Exporting a VM to a data domain - Editing of floating disks - Integrating ansible-runner into engine, which allows a more detailed monitoring of playbooks executed from engine - Adding/reinstalling hosts are now completely based on Ansible - The OpenStack Neutron Agent cannot be configured by oVirt anymore, it should be configured by TripleO instead This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.1 * CentOS Linux (or similar) 8.1 This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.1 * CentOS Linux (or similar) 8.1 * oVirt Node 4.4 based on CentOS Linux 8.1 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. If you manage more than one oVirt instance, OKD or RDO we also recommend to try ManageIQ <http://manageiq.org/>. In such a case, please be sure to take the qc2 image and not the ova image. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.0 release highlights: http://www.ovirt.org/release/4.4.0/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.0/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/>* <https://www.redhat.com/en/summit?sc_cid=7013a000002D2QxAAK>* *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

1 0

oVirt 4.4.0 Beta release refresh is now available for testing
by Sandro Bonazzola 09 Apr '20

09 Apr '20

oVirt 4.4.0 Beta release refresh is now available for testing The oVirt Project is excited to announce the availability of the beta release of oVirt 4.4.0 refresh for testing, as of April 9th, 2020 This release unleashes an altogether more powerful and flexible open source virtualization solution that encompasses hundreds of individual changes and a wide range of enhancements across the engine, storage, network, user interface, and analytics on top of oVirt 4.3. Important notes before you try it Please note this is a Beta release. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not to be used in production. In particular, please note that upgrades from 4.3 and future upgrades from this beta to the final 4.4 release from this version are not supported. Some of the features included in oVirt 4.4.0 Beta require content that will be available in CentOS Linux 8.2 but can’t be tested on RHEL 8.2 beta yet due to some incompatibility in openvswitch package shipped in CentOS Virt SIG which requires to rebuild openvswitch on top of CentOS 8.2. Known Issues - ovirt-imageio development is still in progress. In this beta you can’t upload images to data domains using the engine web application. You can still copy iso images into the deprecated ISO domain for installing VMs or upload and download to/from data domains is fully functional via the REST API and SDK. For uploading and downloading via the SDK, please see: - https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/upload_d… - https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/download… Both scripts are standalone command line tool, try --help for more info. Installation instructions For the engine: either use appliance or: - Install CentOS Linux 8 minimal from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - dnf module enable -y javapackages-tools pki-deps 389-ds - dnf install ovirt-engine - engine-setup For the nodes: Either use oVirt Node ISO or: - Install CentOS Linux 8 from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… ; select minimal installation - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - Attach the host to engine and let it be deployed. What’s new in oVirt 4.4.0 Beta? - Hypervisors based on CentOS Linux 8 (rebuilt from award winning RHEL8), for both oVirt Node and standalone CentOS Linux hosts - Easier network management and configuration flexibility with NetworkManager - VMs based on a more modern Q35 chipset with legacy seabios and UEFI firmware - Support for direct passthrough of local host disks to VMs - Live migration improvements for High Performance guests. - New Windows Guest tools installer based on WiX framework now moved to VirtioWin project - Dropped support for cluster level prior to 4.2 - Dropped SDK3 support - 4K disks support only for file based storage. iSCSI/FC storage do not support 4k disks yet. - Exporting a VM to a data domain - Editing of floating disks - Integrating ansible-runner into engine, which allows a more detailed monitoring of playbooks executed from engine - Adding/reinstalling hosts are now completely based on Ansible - The OpenStack Neutron Agent cannot be configured by oVirt anymore, it should be configured by TripleO instead This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.1 * CentOS Linux (or similar) 8.1 This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.1 * CentOS Linux (or similar) 8.1 * oVirt Node 4.4 based on CentOS Linux 8.1 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. If you manage more than one oVirt instance, OKD or RDO we also recommend to try ManageIQ <http://manageiq.org/>. In such a case, please be sure to take the qc2 image and not the ova image. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.0 release highlights: http://www.ovirt.org/release/4.4.0/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.0/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/>* <https://www.redhat.com/en/summit?sc_cid=7013a000002D2QxAAK>* *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

1 0

oVirt 4.4.0 Beta release refresh is now available for testing
by Sandro Bonazzola 03 Apr '20

03 Apr '20

oVirt 4.4.0 Beta release refresh is now available for testing The oVirt Project is excited to announce the availability of the beta release of oVirt 4.4.0 refresh for testing, as of April 3rd, 2020 This release unleashes an altogether more powerful and flexible open source virtualization solution that encompasses hundreds of individual changes and a wide range of enhancements across the engine, storage, network, user interface, and analytics on top of oVirt 4.3. Important notes before you try it Please note this is a Beta release. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. In particular, please note that upgrades from 4.3 and future upgrades from this beta to the final 4.4 release from this version are not supported. Some of the features included in oVirt 4.4.0 Beta require content that will be available in CentOS Linux 8.2 but can’t be tested on RHEL 8.2 beta yet due to some incompatibility in openvswitch package shipped in CentOS Virt SIG which requires to rebuild openvswitch on top of CentOS 8.2. Known Issues - ovirt-imageio development is still in progress. In this beta you can’t upload images to data domains using the engine web application. You can still copy iso images into the deprecated ISO domain for installing VMs or upload and download to/from data domains is fully functional via the REST API and SDK. For uploading and downloading via the SDK, please see: - https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/upload_d… - https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/download… Both scripts are standalone command line tools, try --help for more info. Installation instructions For the engine: either use appliance or: - Install CentOS Linux 8 minimal from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - dnf module enable -y javapackages-tools pki-deps 389-ds - dnf install ovirt-engine - engine-setup For the nodes: Either use oVirt Node ISO or: - Install CentOS Linux 8 from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… ; select minimal installation - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - Attach the host to engine and let it be deployed. What’s new in oVirt 4.4.0 Beta? - Hypervisors based on CentOS Linux 8 (rebuilt from award winning RHEL8), for both oVirt Node and standalone CentOS Linux hosts - Easier network management and configuration flexibility with NetworkManager - VMs based on a more modern Q35 chipset with legacy seabios and UEFI firmware - Support for direct passthrough of local host disks to VMs - Live migration improvements for High Performance guests. - New Windows Guest tools installer based on WiX framework now moved to VirtioWin project - Dropped support for cluster level prior to 4.2 - Dropped SDK3 support - 4K disks support only for file based storage. iSCSI/FC storage do not support 4k disks yet. - Exporting a VM to a data domain - Editing of floating disks - Integrating ansible-runner into engine, which allows a more detailed monitoring of playbooks executed from engine - Adding/reinstalling hosts are now completely based on Ansible - The OpenStack Neutron Agent cannot be configured by oVirt anymore, it should be configured by TripleO instead This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.1 * CentOS Linux (or similar) 8.1 This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.1 * CentOS Linux (or similar) 8.1 * oVirt Node 4.4 based on CentOS Linux 8.1 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. If you manage more than one oVirt instance, OKD or RDO we also recommend to try ManageIQ <http://manageiq.org/>. In such a case, please be sure to take the qc2 image and not the ova image. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.0 release highlights: http://www.ovirt.org/release/4.4.0/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.0/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/>* <https://www.redhat.com/en/summit?sc_cid=7013a000002D2QxAAK>* *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

1 0

oVirt 4.4.0 Beta release is now available for testing
by Sandro Bonazzola 27 Mar '20

27 Mar '20

oVirt 4.4.0 Beta release is now available for testing The oVirt Project is excited to announce the availability of the beta release of oVirt 4.4.0 for testing, as of March 27th, 2020 This release unleashes an altogether more powerful and flexible open source virtualization solution that encompasses hundreds of individual changes and a wide range of enhancements across the engine, storage, network, user interface, and analytics on top of oVirt 4.3. Important notes before you try it Please note this is a Beta release. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not to be used in production. In particular, please note that upgrades from 4.3 and future upgrades from this beta to the final 4.4 release from this version are not supported. Some of the features included in oVirt 4.4.0 Beta require content that will be available in CentOS Linux 8.2 which are currently included in Red Hat Enterprise Linux 8.2 beta. If you want to have a better experience you can test oVirt 4.4.0 Beta on Red Hat Enterprise Linux 8.2 beta. Known Issues - ovirt-imageio development is still in progress. In this beta you can’t upload images to data domains. You can still copy iso images into the deprecated ISO domain for installing VMs. Installation instructions For the engine: either use appliance or: - Install CentOS Linux 8 minimal from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - dnf module enable -y javapackages-tools pki-deps 389-ds - dnf install ovirt-engine - engine-setup For the nodes: Either use oVirt Node ISO or: - Install CentOS Linux 8 from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… ; select minimal installation - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - Attach the host to engine and let it be deployed. What’s new in oVirt 4.4.0 Beta? - Hypervisors based on CentOS Linux 8 (rebuilt from award winning RHEL8), for both oVirt Node and standalone CentOS Linux hosts - Easier network management and configuration flexibility with NetworkManager - VMs based on a more modern Q35 chipset with legacy seabios and UEFI firmware - Support for direct passthrough of local host disks to VMs - Live migration improvements for High Performance guests. - New Windows Guest tools installer based on WiX framework now moved to VirtioWin project - Dropped support for cluster level prior to 4.2 - Dropped SDK3 support - 4K disks support - Exporting a VM to a data domain - Editing of floating disks - Integrating ansible-runner into engine, which allows a more detailed monitoring of playbooks executed from engine - Adding/reinstalling hosts are now completely based on Ansible - The OpenStack Neutron Agent cannot be configured by oVirt anymore, it should be configured by TripleO instead This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.1 or newer * CentOS Linux (or similar) 8.1 or newer This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.1 or newer * CentOS Linux (or similar) 8.1 or newer * oVirt Node 4.4 based on CentOS Linux 8.1 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. If you manage more than one oVirt instance, OKD or RDO we also recommend to try ManageIQ <http://manageiq.org/>. In such a case, please be sure to take the qc2 image and not the ova image. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.0 release highlights: http://www.ovirt.org/release/4.4.0/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.0/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/>* <https://www.redhat.com/en/summit?sc_cid=7013a000002D2QxAAK>* *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

1 0

oVirt 4.3.9 is now generally available
by Sandro Bonazzola 20 Mar '20

20 Mar '20

The oVirt Project is pleased to announce the general availability of oVirt 4.3.9 as of March 19th, 2020. This update is the ninth in a series of stabilization updates to the 4.3 series. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.7 or later (but < 8) * CentOS Linux (or similar) 7.7 or later (but < 8) This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.7 or later (but < 8) * CentOS Linux (or similar) 7.7 or later (but < 8) * oVirt Node 4.3 (available for x86_64 only) See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Node is already available[2] oVirt Node and Appliance have been updated including: - oVirt 4.3.9: http://www.ovirt.org/release/4.3.9/ - Including fixes for CVE-2019-17195 nimbus-jose-jwt: Uncaught exceptions while parsing a JWT <https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2019-17195> (removed dependency on nimbus-jose-jwt) - Latest CentOS 7.7 updates including: - CentOS 7.7 Batch#5 (CentOS Errata not yet published) - CEBA-2020:0381 CentOS 7 NetworkManager BugFix Update <https://lists.centos.org/pipermail/centos-announce/2020-February/035627.html> - CEBA-2020:0384 CentOS 7 firewalld BugFix Update <https://lists.centos.org/pipermail/centos-announce/2020-February/035637.html> - CESA-2020:0703 Important CentOS 7 http-parser Security Update <https://lists.centos.org/pipermail/centos-announce/2020-March/035655.html> - CESA-2020:0375 Important CentOS 7 kernel Security Update <https://lists.centos.org/pipermail/centos-announce/2020-February/035620.html> - CEBA-2020:0373 CentOS 7 libguestfs BugFix Update <https://lists.centos.org/pipermail/centos-announce/2020-February/035625.html> - CEBA-2020:0367 CentOS 7 libvirt BugFix Update <https://lists.centos.org/pipermail/centos-announce/2020-February/035626.html> - CEBA-2020:0364 CentOS 7 net-snmp BugFix Update <https://lists.centos.org/pipermail/centos-announce/2020-February/035629.html> - CEBA-2020:0379 CentOS 7 sg3_utils BugFix Update <https://lists.centos.org/pipermail/centos-announce/2020-February/035624.html> - CESA-2020:0540 Important CentOS 7 sudo Security Update <https://lists.centos.org/pipermail/centos-announce/2020-February/035643.html> - CEBA-2020:0369 CentOS 7 systemd BugFix Update <https://lists.centos.org/pipermail/centos-announce/2020-February/035631.html> - CEBA-2020:0386 CentOS 7 postgresql BugFix Update <https://lists.centos.org/pipermail/centos-announce/2020-February/035630.html> - latest CentOS Virt, OpsTools and Storage SIG updates: - Ansible 2.9.6: https://github.com/ansible/ansible/blob/stable-2.9/changelogs/CHANGELOG-v2.… - Glusterfs 6.8: https://docs.gluster.org/en/latest/release-notes/6.8/ - Collectd 5.10.0: https://collectd.org/wiki/index.php/Version_5.10 Given the amount of security fixes provided by this release, upgrade is recommended as soon as practical. Additional Resources: * Read more about the oVirt 4.3.9 release highlights: http://www.ovirt.org/release/4.3.9/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.9/ [2] http://resources.ovirt.org/pub/ovirt-4.3/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/>* <https://www.redhat.com/en/summit?sc_cid=7013a000002D2QxAAK>* *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

1 0