- Announce - oVirt List Archives

[ANN] oVirt 4.4.1 Fourth Release Candidate is now available for testing
by Sandro Bonazzola 11 Jun '20

11 Jun '20

oVirt 4.4.1 Fourth Release Candidate is now available for testing The oVirt Project is pleased to announce the availability of oVirt 4.4.1 Fourth Release Candidate for testing, as of June 11th, 2020. This update is the first in a series of stabilization updates to the 4.4 series. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. Some of the features included in oVirt 4.4.1 Release Candidate require content that will be available in CentOS Linux 8.2 but can’t be tested on RHEL 8.2 yet due to some incompatibility in openvswitch package shipped in CentOS Virt SIG which requires to rebuild openvswitch on top of CentOS 8.2. Installation instructions For the engine: either use appliance or: - Install CentOS Linux 8 minimal from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - dnf module enable -y javapackages-tools pki-deps postgresql:12 - dnf install ovirt-engine - engine-setup For the nodes: Either use oVirt Node ISO or: - Install CentOS Linux 8 from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… ; select minimal installation - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - Attach the host to engine and let it be deployed. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.1 or newer * CentOS Linux (or similar) 8.1 or newer This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.1 or newer * CentOS Linux (or similar) 8.1 or newer * oVirt Node 4.4.1 based on CentOS Linux 8.1 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.1 release highlights: http://www.ovirt.org/release/4.4.1/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.1/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*

1 0

[ANN] oVirt 4.4.1 Third Release Candidate is now available for testing
by Lev Veyde 04 Jun '20

04 Jun '20

oVirt 4.4.1 Third Release Candidate is now available for testing The oVirt Project is pleased to announce the availability of oVirt 4.4.1 Third Release Candidate for testing, as of June 4th, 2020. This update is the first in a series of stabilization updates to the 4.4 series. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. Some of the features included in oVirt 4.4.1 Release Candidate require content that will be available in CentOS Linux 8.2 but can’t be tested on RHEL 8.2 yet due to some incompatibility in openvswitch package shipped in CentOS Virt SIG which requires to rebuild openvswitch on top of CentOS 8.2. Installation instructions For the engine: either use appliance or: - Install CentOS Linux 8 minimal from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - dnf module enable -y javapackages-tools pki-deps postgresql:12 - dnf install ovirt-engine - engine-setup For the nodes: Either use oVirt Node ISO or: - Install CentOS Linux 8 from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… ; select minimal installation - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - Attach the host to engine and let it be deployed. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.1 or newer * CentOS Linux (or similar) 8.1 or newer This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.1 or newer * CentOS Linux (or similar) 8.1 or newer * oVirt Node 4.4 based on CentOS Linux 8.1 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.1 release highlights: http://www.ovirt.org/release/4.4.1/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.1/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com [image: image.png] <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

[ANN] oVirt 4.3.10 is now generally available
by Lev Veyde 03 Jun '20

03 Jun '20

The oVirt Project is pleased to announce the general availability of oVirt 4.3.10 as of June 3rd, 2020. This update is the tenth in a series of stabilization updates to the 4.3 series. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.8 or later (but < 8) * CentOS Linux (or similar) 7.8 or later (but < 8) This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.8 or later (but < 8) * CentOS Linux (or similar) 7.8 or later (but < 8) * oVirt Node 4.3 (available for x86_64 only) See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance will be available soon - oVirt Node is already available[2] oVirt Node and Appliance have been updated including: - oVirt 4.3.10: http://www.ovirt.org/release/4.3.10/ - Latest CentOS 7.8 updates - latest CentOS Virt, OpsTools and Storage SIG updates Additional Resources: * Read more about the oVirt 4.3.10 release highlights: http://www.ovirt.org/release/4.3.10/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.10/ [2] http://resources.ovirt.org/pub/ovirt-4.3/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

[ANN] oVirt 4.4.1 Second Release Candidate
by Sandro Bonazzola 27 May '20

27 May '20

oVirt 4.4.1 Second Release Candidate is now available for testing The oVirt Project is pleased to announce the availability of oVirt 4.4.1 Second Release Candidate for testing, as of May 28th, 2020. This update is the first in a series of stabilization updates to the 4.4 series. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. Some of the features included in oVirt 4.4.1 Release Candidate require content that will be available in CentOS Linux 8.2 but can’t be tested on RHEL 8.2 yet due to some incompatibility in openvswitch package shipped in CentOS Virt SIG which requires to rebuild openvswitch on top of CentOS 8.2. Installation instructions For the engine: either use appliance or: - Install CentOS Linux 8 minimal from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - dnf module enable -y javapackages-tools pki-deps postgresql:12 - dnf install ovirt-engine - engine-setup For the nodes: Either use oVirt Node ISO or: - Install CentOS Linux 8 from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… ; select minimal installation - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - Attach the host to engine and let it be deployed. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.1 or newer * CentOS Linux (or similar) 8.1 or newer This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.1 or newer * CentOS Linux (or similar) 8.1 or newer * oVirt Node 4.4 based on CentOS Linux 8.1 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. If you manage more than one oVirt instance, OKD or RDO we also recommend to try ManageIQ <http://manageiq.org/>. In such a case, please be sure to take the qc2 image and not the ova image. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.1 release highlights: http://www.ovirt.org/release/4.4.1/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.1/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> [image: |Our code is open_] <https://www.redhat.com/en/our-code-is-open> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

1 0

[ANN] oVirt 4.4.1 First Release Candidate is now available for testing
by Lev Veyde 25 May '20

25 May '20

oVirt 4.4.1 First Release Candidate is now available for testing The oVirt Project is pleased to announce the availability of oVirt 4.4.1 First Release Candidate for testing, as of May 25th, 2020. This update is the first in a series of stabilization updates to the 4.4 series. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. Some of the features included in oVirt 4.4.1 Release Candidate require content that will be available in CentOS Linux 8.2 but can’t be tested on RHEL 8.2 beta yet due to some incompatibility in openvswitch package shipped in CentOS Virt SIG which requires to rebuild openvswitch on top of CentOS 8.2. Installation instructions For the engine: either use appliance or: - Install CentOS Linux 8 minimal from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - dnf module enable -y javapackages-tools pki-deps postgresql:12 - dnf install ovirt-engine - engine-setup For the nodes: Either use oVirt Node ISO or: - Install CentOS Linux 8 from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… ; select minimal installation - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - Attach the host to engine and let it be deployed. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.1 or newer * CentOS Linux (or similar) 8.1 or newer This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.1 or newer * CentOS Linux (or similar) 8.1 or newer * oVirt Node 4.4 based on CentOS Linux 8.1 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. If you manage more than one oVirt instance, OKD or RDO we also recommend to try ManageIQ <http://manageiq.org/>. In such a case, please be sure to take the qc2 image and not the ova image. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.1 release highlights: http://www.ovirt.org/release/4.4.1/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.1/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

[ANN] oVirt 4.3.10 Fifth Release Candidate is now available for testing
by Lev Veyde 22 May '20

22 May '20

The oVirt Project is pleased to announce the availability of oVirt 4.3.10 Fifth Release Candidate for testing as of May 22nd, 2020. This update is the tenth in a series of stabilization updates to the 4.3 series. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.7 or later (but < 8) * CentOS Linux (or similar) 7.7 or later (but < 8) This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.7 or later (but < 8) * CentOS Linux (or similar) 7.7 or later (but < 8) * oVirt Node 4.3 (available for x86_64 only) See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Node is already available[2] Additional Resources: * Read more about the oVirt 4.3.10 release highlights: http://www.ovirt.org/release/4.3.10/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.10/ [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

oVirt 4.4.0 Release is now generally available
by Sandro Bonazzola 20 May '20

20 May '20

oVirt 4.4.0 Release is now generally available The oVirt Project is excited to announce the general availability of the oVirt 4.4.0 Release, as of May 20th, 2020 This release unleashes an altogether more powerful and flexible open source virtualization solution that encompasses hundreds of individual changes and a wide range of enhancements across the engine, storage, network, user interface, and analytics, as compared to oVirt 4.3. Important notes before you install / upgrade Some of the features included in the oVirt 4.4.0 release require content that will be available in CentOS Linux 8.2 but cannot be tested on RHEL 8.2 yet due to some incompatibility in the openvswitch package that is shipped in CentOS Virt SIG, which requires rebuilding openvswitch on top of CentOS 8.2. The cluster switch type OVS is not implemented for CentOS 8 hosts. Please note that oVirt 4.4 only supports clusters and datacenters with compatibility version 4.2 and above. If clusters or datacenters are running with an older compatibility version, you need to upgrade them to at least 4.2 (4.3 is recommended). Please note that in RHEL 8 / CentOS 8 several devices that worked on EL7 are no longer supported. For example, megaraid_sas driver is removed. If you use Enterprise Linux 8 hosts you can try to provide the necessary drivers for the deprecated hardware using the DUD method (See users mailing list thread on this at https://lists.ovirt.org/archives/list/users@ovirt.org/thread/NDSVUZSESOXEFJ… ) Installation instructions For the engine: either use the oVirt appliance or install CentOS Linux 8 minimal by following these steps: - Install the CentOS Linux 8 image from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44.rpm - dnf update (reboot if needed) - dnf module enable -y javapackages-tools pki-deps postgresql:12 - dnf install ovirt-engine - engine-setup For the nodes: Either use oVirt Node ISO or: - Install CentOS Linux 8 from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8…, selecting the minimal installation. - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44.rpm - dnf update (reboot if needed) - Attach the host to the engine and let it be deployed. Update instructionsUpdate from oVirt 4.4 Release Candidate On the engine side and on CentOS hosts, you’ll need to switch from ovirt44-pre to ovirt44 repositories. In order to do so, you need to: 1. dnf remove ovirt-release44-pre 2. rm -f /etc/yum.repos.d/ovirt-4.4-pre-dependencies.repo 3. rm -f /etc/yum.repos.d/ovirt-4.4-pre.repo 4. dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44.rpm 5. dnf update On the engine side you’ll need to run engine-setup only if you were not already on the latest release candidate. On oVirt Node, you’ll need to upgrade with: 1. Move node to maintenance 2. dnf install https://resources.ovirt.org/pub/ovirt-4.4/rpm/el8/noarch/ovirt-node-ng-imag… 3. Reboot 4. Activate the host Update from oVirt 4.3 oVirt 4.4 is available only for CentOS 8. In-place upgrades from previous installations, based on CentOS 7, are not possible. For the engine, use backup, and restore that into a new engine. Nodes will need to be reinstalled. A 4.4 engine can still manage existing 4.3 hosts, but you can’t add new ones. For a standalone engine, please refer to upgrade procedure at https://ovirt.org/documentation/upgrade_guide/#Upgrading_from_4-3 If needed, run ovirt-engine-rename (see engine rename tool documentation at https://www.ovirt.org/documentation/admin-guide/chap-Utilities.html ) When upgrading hosts: You need to upgrade one host at a time. 1. Turn host to maintenance. Virtual machines on that host should migrate automatically to a different host. 2. Remove it from the engine 3. Re-install it with el8 or oVirt Node as per installation instructions 4. Re-add the host to the engine Please note that you may see some issues live migrating VMs from el7 to el8. If you hit such a case, please turn off the vm on el7 host and get it started on the new el8 host in order to be able to move the next el7 host to maintenance. What’s new in oVirt 4.4.0 Release? - Hypervisors based on CentOS Linux 8 (rebuilt from award winning RHEL8), for both oVirt Node and standalone CentOS Linux hosts. - Easier network management and configuration flexibility with NetworkManager. - VMs based on a more modern Q35 chipset with legacy SeaBIOS and UEFI firmware. - Support for direct passthrough of local host disks to VMs. - Live migration improvements for High Performance guests. - New Windows guest tools installer based on WiX framework now moved to VirtioWin project. - Dropped support for cluster level prior to 4.2. - Dropped API/SDK v3 support deprecated in past versions. - 4K block disk support only for file-based storage. iSCSI/FC storage do not support 4K disks yet. - You can export a VM to a data domain. - You can edit floating disks. - Ansible Runner (ansible-runner) is integrated within the engine, enabling more detailed monitoring of playbooks executed from the engine. - Adding and reinstalling hosts is now completely based on Ansible, replacing ovirt-host-deploy, which is not used anymore. - The OpenStack Neutron Agent cannot be configured by oVirt anymore, it should be configured by TripleO instead. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.1 * CentOS Linux (or similar) 8.1 This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.1 * CentOS Linux (or similar) 8.1 * oVirt Node 4.4 based on CentOS Linux 8.1 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. If you manage more than one oVirt instance, OKD or RDO we also recommend to try ManageIQ <http://manageiq.org/>. In such a case, please be sure to take the qc2 image and not the ova image. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.0 release highlights: http://www.ovirt.org/release/4.4.0/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.0/ [2] http://resources.ovirt.org/pub/ovirt-4.4/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> [image: |Our code is open_] <https://www.redhat.com/en/our-code-is-open> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

1 0

[ANN] oVirt 4.4.0 Second Release Candidate is now available for testing
by Lev Veyde 15 May '20

15 May '20

oVirt 4.4.0 Second Release Candidate is now available for testing The oVirt Project is excited to announce the availability of oVirt 4.4.0 Second Release Candidate for testing, as of May 15th, 2020 This release unleashes an altogether more powerful and flexible open source virtualization solution that encompasses hundreds of individual changes and a wide range of enhancements across the engine, storage, network, user interface, and analytics on top of oVirt 4.3. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not to be used in production. Some of the features included in oVirt 4.4.0 Release Candidate require content that will be available in CentOS Linux 8.2 but can’t be tested on RHEL 8.2 beta yet due to some incompatibility in openvswitch package shipped in CentOS Virt SIG which requires to rebuild openvswitch on top of CentOS 8.2. Installation instructions For the engine: either use appliance or: - Install CentOS Linux 8 minimal from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - dnf module enable -y javapackages-tools pki-deps postgresql:12 389-ds - dnf install ovirt-engine - engine-setup For the nodes: Either use oVirt Node ISO or: - Install CentOS Linux 8 from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… ; select minimal installation - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - Attach the host to engine and let it be deployed. What’s new in oVirt 4.4.0? - Hypervisors based on CentOS Linux 8 (rebuilt from award winning RHEL8), for both oVirt Node and standalone CentOS Linux hosts - Easier network management and configuration flexibility with NetworkManager - VMs based on a more modern Q35 chipset with legacy seabios and UEFI firmware - Support for direct passthrough of local host disks to VMs - Live migration improvements for High Performance guests. - New Windows Guest tools installer based on WiX framework now moved to VirtioWin project - Dropped support for cluster level prior to 4.2 - Dropped SDK3 support - 4K disks support - Exporting a VM to a data domain - Editing of floating disks - Integrating ansible-runner into engine, which allows a more detailed monitoring of playbooks executed from engine - Adding/reinstalling hosts are now completely based on Ansible - The OpenStack Neutron Agent cannot be configured by oVirt anymore, it should be configured by TripleO instead This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.1 or newer * CentOS Linux (or similar) 8.1 or newer This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.1 or newer * CentOS Linux (or similar) 8.1 or newer * oVirt Node 4.4 based on CentOS Linux 8.1 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. If you manage more than one oVirt instance, OKD or RDO we also recommend to try ManageIQ <http://manageiq.org/>. In such a case, please be sure to take the qc2 image and not the ova image. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.0 release highlights: http://www.ovirt.org/release/4.4.0/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.0/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

[ANN] oVirt 4.3.10 Fourth Release Candidate is now available for testing
by Lev Veyde 14 May '20

14 May '20

The oVirt Project is pleased to announce the availability of oVirt 4.3.10 Fourth Release Candidate for testing as of May 14th, 2020. This update is the tenth in a series of stabilization updates to the 4.3 series. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.7 or later (but < 8) * CentOS Linux (or similar) 7.7 or later (but < 8) This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.7 or later (but < 8) * CentOS Linux (or similar) 7.7 or later (but < 8) * oVirt Node 4.3 (available for x86_64 only) See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Node is already available[2] Additional Resources: * Read more about the oVirt 4.3.10 release highlights: http://www.ovirt.org/release/4.3.10/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.10/ [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

oVirt and Fedora
by Sandro Bonazzola 10 May '20

10 May '20

If you have followed the oVirt project for a few releases you already know oVirt has struggled to keep the pace with the fast innovation cycles Fedora Project is following. Back in September 2019 CentOS project launched CentOS Stream as a rolling preview of future RHEL kernels and features, providing an upstream development platform for ecosystem developers that sits between Fedora and RHEL. Since then the oVirt project tried to keep the software working on Fedora, CenOS Stream, and RHEL/CentOS but it became quickly evident the project lacked resources to keep the project running on three platforms. Further, our user surveys show that oVirt users strongly prefer using oVirt on CentOS and RHEL. With the upcoming end of life of Fedora 30 the oVirt project has decided to stop trying to keep the pace with this amazing platform, focusing on stabilizing the software codebase on RHEL / CentOS Linux. By focusing our resources and community efforts on RHEL/CentOS Linux and Centos Stream, we can provide better support for those platforms and use more time for moving oVirt forward. -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> [image: |Our code is open_] <https://www.redhat.com/en/our-code-is-open> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

1 0