- Announce - oVirt List Archives

[ANN] oVirt 4.4.3 Fourth Release Candidate is now available for testing
by Lev Veyde 08 Oct '20

08 Oct '20

oVirt 4.4.3 Fourth Release Candidate is now available for testing The oVirt Project is pleased to announce the availability of oVirt 4.4.3 Fourth Release Candidate for testing, as of October 8th, 2020. This update is the third in a series of stabilization updates to the 4.4 series. How to prevent hosts entering emergency mode after upgrade from oVirt 4.4.1 Note: Upgrading from 4.4.2 GA should not require re-doing these steps, if already performed while upgrading from 4.4.1 to 4.4.2 GA. These are only required to be done once. Due to Bug 1837864 <https://bugzilla.redhat.com/show_bug.cgi?id=1837864> - Host enter emergency mode after upgrading to latest build If you have your root file system on a multipath device on your hosts you should be aware that after upgrading from 4.4.1 to 4.4.3 you may get your host entering emergency mode. In order to prevent this be sure to upgrade oVirt Engine first, then on your hosts: 1. Remove the current lvm filter while still on 4.4.1, or in emergency mode (if rebooted). 2. Reboot. 3. Upgrade to 4.4.3 (redeploy in case of already being on 4.4.3). 4. Run vdsm-tool config-lvm-filter to confirm there is a new filter in place. 5. Only if not using oVirt Node: - run "dracut --force --add multipath” to rebuild initramfs with the correct filter configuration 6. Reboot. Documentation - If you want to try oVirt as quickly as possible, follow the instructions on the Download <https://ovirt.org/download/> page. - For complete installation, administration, and usage instructions, see the oVirt Documentation <https://ovirt.org/documentation/>. - For upgrading from a previous version, see the oVirt Upgrade Guide <https://ovirt.org/documentation/upgrade_guide/>. - For a general overview of oVirt, see About oVirt <https://ovirt.org/community/about.html>. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. Installation instructions For installation instructions and additional information please refer to: https://ovirt.org/documentation/ This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.2 or newer * CentOS Linux (or similar) 8.2 or newer This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.2 or newer * CentOS Linux (or similar) 8.2 or newer * oVirt Node 4.4 based on CentOS Linux 8.2 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.3 release highlights: http://www.ovirt.org/release/4.4.3/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.3/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

oVirt documentation updates
by Sandro Bonazzola 07 Oct '20

07 Oct '20

The oVirt documentation team updated the following guides: - Administration Guide <https://ovirt.org/documentation/administration_guide/> - Data Warehouse Guide <https://ovirt.org/documentation/data_warehouse_guide/> - Disaster Recovery Guide <https://ovirt.org/documentation/disaster_recovery_guide/> - Virtual Machine Management Guide <https://ovirt.org/documentation/virtual_machine_management_guide/> Thanks, -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.* * <https://www.redhat.com/it/forums/emea/italy-track>*

1 0

[ANN] oVirt 4.4.3 Third Release Candidate is now available for testing
by Lev Veyde 01 Oct '20

01 Oct '20

oVirt 4.4.3 Third Release Candidate is now available for testing The oVirt Project is pleased to announce the availability of oVirt 4.4.3 Third Release Candidate for testing, as of October 1st, 2020. This update is the third in a series of stabilization updates to the 4.4 series. How to prevent hosts entering emergency mode after upgrade from oVirt 4.4.1 Note: Upgrading from 4.4.2 GA should not require re-doing these steps, if already performed while upgrading from 4.4.1 to 4.4.2 GA. These are only required to be done once. Due to Bug 1837864 <https://bugzilla.redhat.com/show_bug.cgi?id=1837864> - Host enter emergency mode after upgrading to latest build If you have your root file system on a multipath device on your hosts you should be aware that after upgrading from 4.4.1 to 4.4.3 you may get your host entering emergency mode. In order to prevent this be sure to upgrade oVirt Engine first, then on your hosts: 1. Remove the current lvm filter while still on 4.4.1, or in emergency mode (if rebooted). 2. Reboot. 3. Upgrade to 4.4.3 (redeploy in case of already being on 4.4.3). 4. Run vdsm-tool config-lvm-filter to confirm there is a new filter in place. 5. Only if not using oVirt Node: - run "dracut --force --add multipath” to rebuild initramfs with the correct filter configuration 6. Reboot. Documentation - If you want to try oVirt as quickly as possible, follow the instructions on the Download <https://ovirt.org/download/> page. - For complete installation, administration, and usage instructions, see the oVirt Documentation <https://ovirt.org/documentation/>. - For upgrading from a previous version, see the oVirt Upgrade Guide <https://ovirt.org/documentation/upgrade_guide/>. - For a general overview of oVirt, see About oVirt <https://ovirt.org/community/about.html>. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. Installation instructions For installation instructions and additional information please refer to: https://ovirt.org/documentation/ This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.2 or newer * CentOS Linux (or similar) 8.2 or newer This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.2 or newer * CentOS Linux (or similar) 8.2 or newer * oVirt Node 4.4 based on CentOS Linux 8.2 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.3 release highlights: http://www.ovirt.org/release/4.4.3/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.3/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

oVirt Node 4.4.2 is now generally available
by Sandro Bonazzola 25 Sep '20

25 Sep '20

oVirt Node 4.4.2 is now generally available The oVirt project is pleased to announce the general availability of oVirt Node 4.4.2 , as of September 25th, 2020. This release completes the oVirt 4.4.2 release published on September 17th Important notes before you install / upgrade Please note that oVirt 4.4 only supports clusters and data centers with compatibility version 4.2 and above. If clusters or data centers are running with an older compatibility version, you need to upgrade them to at least 4.2 (4.3 is recommended). Please note that in RHEL 8 / CentOS 8 several devices that worked on EL7 are no longer supported. For example, the megaraid_sas driver is removed. If you use Enterprise Linux 8 hosts you can try to provide the necessary drivers for the deprecated hardware using the DUD method (See the users’ mailing list thread on this at https://lists.ovirt.org/archives/list/users@ovirt.org/thread/NDSVUZSESOXEFJ… ) How to prevent hosts entering emergency mode after upgrade from oVirt 4.4.1 Due to Bug 1837864 <https://bugzilla.redhat.com/show_bug.cgi?id=1837864> - Host enter emergency mode after upgrading to latest build If you have your root file system on a multipath device on your hosts you should be aware that after upgrading from 4.4.1 to 4.4.2 you may get your host entering emergency mode. In order to prevent this be sure to upgrade oVirt Engine first, then on your hosts: 1. Remove the current lvm filter while still on 4.4.1, or in emergency mode (if rebooted). 2. Reboot. 3. Upgrade to 4.4.2 (redeploy in case of already being on 4.4.2). 4. Run vdsm-tool config-lvm-filter to confirm there is a new filter in place. 5. Only if not using oVirt Node: - run "dracut --force --add multipath” to rebuild initramfs with the correct filter configuration 6. Reboot. Documentation - If you want to try oVirt as quickly as possible, follow the instructions on the Download <https://ovirt.org/download/> page. - For complete installation, administration, and usage instructions, see the oVirt Documentation <https://ovirt.org/documentation/>. - For upgrading from a previous version, see the oVirt Upgrade Guide <https://ovirt.org/documentation/upgrade_guide/>. - For a general overview of oVirt, see About oVirt <https://ovirt.org/community/about.html>. What’s new in oVirt Node 4.4.2 Release? oVirt Node has been updated, including: - oVirt 4.4.2: http://www.ovirt.org/release/4.4.2/ - Ansible 2.9.13: https://github.com/ansible/ansible/blob/stable-2.9/changelogs/CHANGELOG-v2.… - Glusterfs 7.7: https://docs.gluster.org/en/latest/release-notes/7.7/ - Advanced Virtualization 8.2.1 See the release notes [1] for installation instructions and a list of new features and bugs fixed. Additional resources: - Read more about the oVirt 4.4.2 release highlights: http://www.ovirt.org/release/4.4.2/ - Get more oVirt project updates on Twitter: https://twitter.com/ovirt - Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.2/ [2] http://resources.ovirt.org/pub/ovirt-4.4/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

2 1

[ANN] oVirt 4.4.3 Second Release Candidate is now available for testing
by Lev Veyde 25 Sep '20

25 Sep '20

oVirt 4.4.3 Second Release Candidate is now available for testing The oVirt Project is pleased to announce the availability of oVirt 4.4.3 Second Release Candidate for testing, as of September 25th, 2020. This update is the third in a series of stabilization updates to the 4.4 series. How to prevent hosts entering emergency mode after upgrade from oVirt 4.4.1 Note: Upgrading from 4.4.2 GA should not require re-doing these steps, if already performed while upgrading from 4.4.1 to 4.4.2 GA. These are only required to be done once. Due to Bug 1837864 <https://bugzilla.redhat.com/show_bug.cgi?id=1837864> - Host enter emergency mode after upgrading to latest build If you have your root file system on a multipath device on your hosts you should be aware that after upgrading from 4.4.1 to 4.4.3 you may get your host entering emergency mode. In order to prevent this be sure to upgrade oVirt Engine first, then on your hosts: 1. Remove the current lvm filter while still on 4.4.1, or in emergency mode (if rebooted). 2. Reboot. 3. Upgrade to 4.4.3 (redeploy in case of already being on 4.4.3). 4. Run vdsm-tool config-lvm-filter to confirm there is a new filter in place. 5. Only if not using oVirt Node: - run "dracut --force --add multipath” to rebuild initramfs with the correct filter configuration 6. Reboot. Documentation - If you want to try oVirt as quickly as possible, follow the instructions on the Download <https://ovirt.org/download/> page. - For complete installation, administration, and usage instructions, see the oVirt Documentation <https://ovirt.org/documentation/>. - For upgrading from a previous version, see the oVirt Upgrade Guide <https://ovirt.org/documentation/upgrade_guide/>. - For a general overview of oVirt, see About oVirt <https://ovirt.org/community/about.html>. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. Installation instructions For installation instructions and additional information please refer to: https://ovirt.org/documentation/ This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.2 or newer * CentOS Linux (or similar) 8.2 or newer This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.2 or newer * CentOS Linux (or similar) 8.2 or newer * oVirt Node 4.4 based on CentOS Linux 8.2 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.3 release highlights: http://www.ovirt.org/release/4.4.3/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.3/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

oVirt Survey Autumn 2020
by Sandro Bonazzola 23 Sep '20

23 Sep '20

As we continue to develop oVirt 4.4, the Development and Integration teams at Red Hat would value insights on how you are deploying the oVirt environment. Please help us to hit the mark by completing this short survey. The survey will close on October 18th 2020. If you're managing multiple oVirt deployments with very different use cases or very different deployments you can consider answering this survey multiple times. *Please note the answers to this survey will be publicly accessible*. This survey is under oVirt Privacy Policy available at https://www.ovirt.org/site/privacy-policy.html . The survey is available https://forms.gle/bPvEAdRyUcyCbgEc7 -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

1 1

[ANN] oVirt 4.4.3 First Release Candidate is now available for testing
by Lev Veyde 17 Sep '20

17 Sep '20

oVirt 4.4.3 First Release Candidate is now available for testing The oVirt Project is pleased to announce the availability of oVirt 4.4.3 First Release Candidate for testing, as of September 17th, 2020. This update is the third in a series of stabilization updates to the 4.4 series. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. Installation instructions For installation instructions and additional information please refer to: https://ovirt.org/documentation/ This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.2 or newer * CentOS Linux (or similar) 8.2 or newer This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.2 or newer * CentOS Linux (or similar) 8.2 or newer * oVirt Node 4.4 based on CentOS Linux 8.2 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG will be available soon for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.3 release highlights: http://www.ovirt.org/release/4.4.3/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.3/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

oVirt 4.4.2 is now generally available
by Lev Veyde 17 Sep '20

17 Sep '20

The oVirt project is excited to announce the general availability of oVirt 4.4.2 , as of September 17th, 2020. This release unleashes an altogether more powerful and flexible open source virtualization solution that encompasses hundreds of individual changes and a wide range of enhancements across the engine, storage, network, user interface, and analytics, as compared to oVirt 4.3. Important notes before you install / upgrade Please note that oVirt 4.4 only supports clusters and data centers with compatibility version 4.2 and above. If clusters or data centers are running with an older compatibility version, you need to upgrade them to at least 4.2 (4.3 is recommended). Please note that in RHEL 8 / CentOS 8 several devices that worked on EL7 are no longer supported. For example, the megaraid_sas driver is removed. If you use Enterprise Linux 8 hosts you can try to provide the necessary drivers for the deprecated hardware using the DUD method (See the users’ mailing list thread on this at https://lists.ovirt.org/archives/list/users@ovirt.org/thread/NDSVUZSESOXEFJ… ) Documentation - If you want to try oVirt as quickly as possible, follow the instructions on the Download <https://ovirt.org/download/> page. - For complete installation, administration, and usage instructions, see the oVirt Documentation <https://ovirt.org/documentation/>. - For upgrading from a previous version, see the oVirt Upgrade Guide <https://ovirt.org/documentation/upgrade_guide/>. - For a general overview of oVirt, see About oVirt <https://ovirt.org/community/about.html>. What’s new in oVirt 4.4.2 Release? This update is the second in a series of stabilization updates to the 4.4 series. This release is available now on x86_64 architecture for: - Red Hat Enterprise Linux 8.2 - CentOS Linux (or similar) 8.2 - CentOS Stream (tech preview) This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: - Red Hat Enterprise Linux 8.2 - CentOS Linux (or similar) 8.2 - CentOS Stream (tech preview) oVirt Node 4.4 based on CentOS Linux 8.2 (available for x86_64 only) will be released separately due to a blocker issue (Bug 1837864 <https://bugzilla.redhat.com/show_bug.cgi?id=1837864>). oVirt Node and Appliance have been updated, including: - oVirt 4.4.2: http://www.ovirt.org/release/4.4.2/ - Ansible 2.9.13: https://github.com/ansible/ansible/blob/stable-2.9/changelogs/CHANGELOG-v2.… - Glusterfs 7.7: https://docs.gluster.org/en/latest/release-notes/7.7/ See the release notes [1] for installation instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG will be available soon for CentOS Linux 8 Additional resources: - Read more about the oVirt 4.4.2 release highlights: http://www.ovirt.org/release/4.4.2/ - Get more oVirt project updates on Twitter: https://twitter.com/ovirt - Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.2/ [2] http://resources.ovirt.org/pub/ovirt-4.4/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

[ANN] oVirt 4.4.2 Fifth Release Candidate is now available for testing
by Lev Veyde 27 Aug '20

27 Aug '20

oVirt 4.4.2 Fifth Release Candidate is now available for testing The oVirt Project is pleased to announce the availability of oVirt 4.4.2 Fifth Release Candidate for testing, as of August 27th, 2020. This update is the second in a series of stabilization updates to the 4.4 series. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. Installation instructions For installation instructions and additional information please refer to: https://ovirt.org/documentation/ This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.2 or newer * CentOS Linux (or similar) 8.2 or newer This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.2 or newer * CentOS Linux (or similar) 8.2 or newer * oVirt Node 4.4 based on CentOS Linux 8.2 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.2 release highlights: http://www.ovirt.org/release/4.4.2/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.2/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

[ANN] oVirt 4.4.2 Fourth Release Candidate is now available for testing
by Lev Veyde 20 Aug '20

20 Aug '20

oVirt 4.4.2 Fourth Release Candidate is now available for testing The oVirt Project is pleased to announce the availability of oVirt 4.4.2 Fourth Release Candidate for testing, as of August 20th, 2020. This update is the second in a series of stabilization updates to the 4.4 series. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. Installation instructions For installation instructions and additional information please refer to: https://ovirt.org/documentation/ This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.2 or newer * CentOS Linux (or similar) 8.2 or newer This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.2 or newer * CentOS Linux (or similar) 8.2 or newer * oVirt Node 4.4 based on CentOS Linux 8.2 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.2 release highlights: http://www.ovirt.org/release/4.4.2/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.2/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0