December 2014 - Users - oVirt List Archives

vdsm losing connection to libvirt
by Chris Adams 17 Dec '14

17 Dec '14

I have a oVirt setup that has three nodes, all running CentOS 7, with a hosted engine running CentOS 6. Two of the nodes (node8 and node9) are configured for hosted engine, and the third (node2) is just a "regular" node (as you might guess from the names, more nodes are coming as I migrate VMs to oVirt). On one node, node8, vdsm periodically loses its connection to libvirt, which causes vdsm to restart. There doesn't appear to be any trigger that I can see (not time of day, load, etc. related). The engine VM is up and running on node8 (don't know if that has anything to do with it). I get some entries in /var/log/messages repeated continuously; the "ovirt-ha-broker: sending ioctl 5401 to a partition" I mentioned before, and the following: Dec 15 20:56:23 node8 journal: User record for user '107' was not found: No such file or directory Dec 15 20:56:23 node8 journal: Group record for user '107' was not found: No such file or directory I don't think those have any relevance (don't know where they come from); filtering those out, I see: Dec 15 20:56:33 node8 journal: End of file while reading data: Input/output error Dec 15 20:56:33 node8 journal: Tried to close invalid fd 0 Dec 15 20:56:38 node8 journal: vdsm root WARNING connection to libvirt broken. ecode: 1 edom: 7 Dec 15 20:56:38 node8 journal: vdsm root CRITICAL taking calling process down. Dec 15 20:56:38 node8 journal: vdsm vds ERROR libvirt error Dec 15 20:56:38 node8 journal: ovirt-ha-broker mgmt_bridge.MgmtBridge ERROR Failed to getVdsCapabilities: Error 16 from getVdsCapabilities: Unexpected exception Dec 15 20:56:45 node8 journal: End of file while reading data: Input/output error Dec 15 20:56:45 node8 vdsmd_init_common.sh: vdsm: Running run_final_hooks Dec 15 20:56:45 node8 systemd: Starting Virtual Desktop Server Manager... <and then all the normal-looking vdsm startup> It is happening about once a day, but not at any regular interval or time (was 02:23 Sunday, then 20:56 Monday). vdsm.log has this at that time: Thread-601576::DEBUG::2014-12-15 20:56:38,715::BindingXMLRPC::1132::vds::(wrapper) client [127.0.0.1]::call getCapabilities with () {} Thread-601576::DEBUG::2014-12-15 20:56:38,718::utils::738::root::(execCmd) /sbin/ip route show to 0.0.0.0/0 table all (cwd None) Thread-601576::DEBUG::2014-12-15 20:56:38,746::utils::758::root::(execCmd) SUCCESS: <err> = ''; <rc> = 0 Thread-601576::WARNING::2014-12-15 20:56:38,754::libvirtconnection::135::root::(wrapper) connection to libvirt broken. ecode: 1 edom: 7 Thread-601576::CRITICAL::2014-12-15 20:56:38,754::libvirtconnection::137::root::(wrapper) taking calling process down. MainThread::DEBUG::2014-12-15 20:56:38,754::vdsm::58::vds::(sigtermHandler) Received signal 15 Thread-601576::DEBUG::2014-12-15 20:56:38,755::libvirtconnection::143::root::(wrapper) Unknown libvirterror: ecode: 1 edom: 7 level: 2 message: internal error: client socket is closed MainThread::DEBUG::2014-12-15 20:56:38,755::protocoldetector::135::vds.MultiProtocolAcceptor::(stop) Stopping Acceptor MainThread::INFO::2014-12-15 20:56:38,755::__init__::563::jsonrpc.JsonRpcServer::(stop) Stopping JsonRPC Server Detector thread::DEBUG::2014-12-15 20:56:38,756::protocoldetector::106::vds.MultiProtocolAcceptor::(_cleanup) Cleaning Acceptor MainThread::INFO::2014-12-15 20:56:38,757::vmchannels::188::vds::(stop) VM channels listener was stopped. MainThread::INFO::2014-12-15 20:56:38,758::momIF::91::MOM::(stop) Shutting down MOM MainThread::DEBUG::2014-12-15 20:56:38,759::task::595::Storage.TaskManager.Task::(_updateState) Task=`26c7680c-23e2-42bb-964c-272e778a168a`::moving from state init -> state preparing MainThread::INFO::2014-12-15 20:56:38,759::logUtils::44::dispatcher::(wrapper) Run and protect: prepareForShutdown(options=None) Thread-601576::ERROR::2014-12-15 20:56:38,755::BindingXMLRPC::1142::vds::(wrapper) libvirt error Traceback (most recent call last): File "/usr/share/vdsm/rpc/BindingXMLRPC.py", line 1135, in wrapper res = f(*args, **kwargs) File "/usr/share/vdsm/rpc/BindingXMLRPC.py", line 463, in getCapabilities ret = api.getCapabilities() File "/usr/share/vdsm/API.py", line 1245, in getCapabilities c = caps.get() File "/usr/share/vdsm/caps.py", line 615, in get caps.update(netinfo.get()) File "/usr/lib/python2.7/site-packages/vdsm/netinfo.py", line 812, in get nets = networks() File "/usr/lib/python2.7/site-packages/vdsm/netinfo.py", line 119, in networks allNets = ((net, net.name()) for net in conn.listAllNetworks(0)) File "/usr/lib/python2.7/site-packages/vdsm/libvirtconnection.py", line 129, in wrapper __connections.get(id(target)).pingLibvirt() File "/usr/lib64/python2.7/site-packages/libvirt.py", line 3642, in getLibVersion if ret == -1: raise libvirtError ('virConnectGetLibVersion() failed', conn=self) libvirtError: internal error: client socket is closed -- Chris Adams <cma(a)cmadams.net>

3 2

alternate method of fencing
by Brent Hartzell 17 Dec '14

17 Dec '14

------=_NextPart_000_001C_01D015FC.D2B58E00 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Is there a way to force oVirt to place a host into maintenance mode automatically when a problem occurs? The problem we have is separate networks for everything: 2 public nics which are bonded active/backup for internet access 4 bonded gigabit nics for our Gluster network 1 IPMI The ipmi is on a completely different network, not attached to anything else other than a VPN. /// Our cluster servers shared Gluster & hypervisor on the same hosts, which works great however, all are 1U servers so we don't have room for another NIC to dedicate to just an ipmi network connection in addition to the ipmi card itself. Even if the PSU on a host fails, then the ipmi power management is useless anyhow and the VM's on that host will not be moved. I've tested putting a host into maintenance mode with running VM's and it will auto-migrate the VM's without issue. Is there a way to make oVirt just force a host into maintenance mode if there's some sort of problem or some other fencing mechanism that will allow the VM's to be migrated to another host? ------=_NextPart_000_001C_01D015FC.D2B58E00 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" = xmlns:o=3D"urn:schemas-microsoft-com:office:office" = xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" = xmlns=3D"http://www.w3.org/TR/REC-html40"><head><meta = http-equiv=3DContent-Type content=3D"text/html; = charset=3Dus-ascii"><meta name=3DGenerator content=3D"Microsoft Word 15 = (filtered medium)"><style></style></head><body lang=3DEN-US = link=3D"#0563C1" vlink=3D"#954F72"><div class=3DWordSection1><p = class=3DMsoNormal>Is there a way to force oVirt to place a host into = maintenance mode automatically when a problem occurs? The problem we = have is separate networks for everything:<o:p></o:p></p><p = class=3DMsoNormal><o:p> </o:p></p><p class=3DMsoNormal>2 public = nics which are bonded active/backup for internet access<o:p></o:p></p><p = class=3DMsoNormal>4 bonded gigabit nics for our Gluster = network<o:p></o:p></p><p class=3DMsoNormal>1 IPMI <o:p></o:p></p><p = class=3DMsoNormal><o:p> </o:p></p><p class=3DMsoNormal>The ipmi is = on a completely different network, not attached to anything else other = than a VPN. <o:p></o:p></p><p class=3DMsoNormal><o:p> </o:p></p><p = class=3DMsoNormal>///<o:p></o:p></p><p = class=3DMsoNormal><o:p> </o:p></p><p class=3DMsoNormal>Our cluster = servers shared Gluster & hypervisor on the same hosts, which works = great however, all are 1U servers so we don’t have room for = another NIC to dedicate to just an ipmi network connection in addition = to the ipmi card itself. Even if the PSU on a host fails, then the ipmi = power management is useless anyhow and the VM’s on that host will = not be moved.<o:p></o:p></p><p class=3DMsoNormal><o:p> </o:p></p><p = class=3DMsoNormal>I’ve tested putting a host into maintenance mode = with running VM’s and it will auto-migrate the VM’s without = issue. Is there a way to make oVirt just force a host into maintenance = mode if there’s some sort of problem or some other fencing = mechanism that will allow the VM’s to be migrated to another = host?<o:p></o:p></p><p class=3DMsoNormal><o:p> </o:p></p><p = class=3DMsoNormal><o:p> </o:p></p></div></body></html> ------=_NextPart_000_001C_01D015FC.D2B58E00--

2 1

VM disk tab doesn't show storage name after 3.5 upgrade
by Ernest Beinrohr 17 Dec '14

17 Dec '14

This is a multi-part message in MIME format. --------------000206030101050508070001 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Before 3.5 in VM disk tab, there was the name of the storage on which the disks resides. After the upgrade to 3.5 this information is missing. PS: as a workaround I have to "edit" the disk to see where it it. I have 7 storages so this info is important for me. -- Ernest Beinrohr, AXON PRO Ing <http://www.beinrohr.sk/ing.php>, RHCE <http://www.beinrohr.sk/rhce.php>, RHCVA <http://www.beinrohr.sk/rhce.php>, LPIC <http://www.beinrohr.sk/lpic.php>, VCA <http://www.beinrohr.sk/vca.php>, +421-2-62410360 +421-903-482603 --------------000206030101050508070001 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=utf-8"> </head> <body text="#000000" bgcolor="#FFFFFF"> Before 3.5 in VM disk tab, there was the name of the storage on which the disks resides. After the upgrade to 3.5 this information is missing.<br> <br> <br> PS: as a workaround I have to "edit" the disk to see where it it. I have 7 storages so this info is important for me.<br> <br> <div class="moz-signature">-- <br> <div id="oernii_footer" style="color: gray;"> <span style="font-family: Lucida Console, Luxi Mono, Courier, monospace; font-size: 90%;"> Ernest Beinrohr, AXON PRO<br> <a style="text-decoration: none; color: gray;" href="http://www.beinrohr.sk/ing.php">Ing</a>, <a style="text-decoration: none; color: gray;" href="http://www.beinrohr.sk/rhce.php">RHCE</a>, <a style="text-decoration: none; color: gray;" href="http://www.beinrohr.sk/rhce.php">RHCVA</a>, <a style="text-decoration: none; color: gray;" href="http://www.beinrohr.sk/lpic.php">LPIC</a>, <a style="text-decoration: none; color: gray;" href="http://www.beinrohr.sk/vca.php">VCA</a>, <br> +421-2-62410360 +421-903-482603 <br> </span> </div> <img src="http://nojsstats.appspot.com/UA-44497096-1/email.beinrohr.sk" moz-do-not-send="true" height="1" width="1" border="0"> </div> </body> </html> --------------000206030101050508070001--

2 2

1. FQDN for vm creating with hosted-engine (Yue, Cong)
by Nikolai Sednev 17 Dec '14

17 Dec '14

------=_Part_11273251_1557423152.1418807793774 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit FQDN or fully qualified domain name means that you have to reserve in your DNS a name corresponding to IP received by HE VM from DHCP. IP address should be reserved for the VM at DHCP. I advise not to use manual IP to FQDN at your host, as this will lead to many confusions, especially when you'll have more than a single host machine, but you always can configure at your /etc/hosts file the FQDN corresponding to IP address given to HE VM. Thanks in advance. Best regards, Nikolai ____________________ Nikolai Sednev Senior Quality Engineer at Compute team Red Hat Israel 34 Jerusalem Road, Ra'anana, Israel 43501 Tel: +972 9 7692043 Mobile: +972 52 7342734 Email: nsednev(a)redhat.com IRC: nsednev ----- Original Message ----- From: users-request(a)ovirt.org To: users(a)ovirt.org Sent: Wednesday, December 17, 2014 1:19:12 AM Subject: Users Digest, Vol 39, Issue 104 Send Users mailing list submissions to users(a)ovirt.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.ovirt.org/mailman/listinfo/users or, via email, send a message with subject or body 'help' to users-request(a)ovirt.org You can reach the person managing the list at users-owner(a)ovirt.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Users digest..." Today's Topics: 1. FQDN for vm creating with hosted-engine (Yue, Cong) 2. Server 2012 R2 + Intel Conroe Cluster (Nathan Llaneza) 3. alternate method of fencing (Brent Hartzell) 4. Re: Don't start vm (Roman Nikolayevich Drovalev) ---------------------------------------------------------------------- Message: 1 Date: Tue, 16 Dec 2014 14:44:44 -0800 From: "Yue, Cong" <Cong_Yue(a)alliedtelesis.com> To: "users(a)ovirt.org" <users(a)ovirt.org> Subject: [ovirt-users] FQDN for vm creating with hosted-engine Message-ID: <ED08B56256B38842A463A2A0804C5AC0326ACA3F65(a)svr-ca-exch1.atg.lc> Content-Type: text/plain; charset="us-ascii" Hi Now I am trying to confirm KVM's HA with ovirt, and doing the walk through as the following guide. http://community.redhat.com/blog/2014/10/up-and-running-with-ovirt-3-5/ During the VM setting, FQDN is asked, what FQDN means about? Does it mean the hostname of VM host? In my case, it is compute2-2. The following is my hosts file, my VM host and storage is 10.0.0.92. And I am trying to assign 10.0.0.95 to the hosted VM. --- [root@compute2-2 ~]# cat /etc/hosts 10.0.0.93 compute2-2 nfs2-2 10.0.0.95 ovrit-test 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 ---- Also how I can remove the VM I installed, as for when I try to do hosted-engine --deploy, it shows --- [root@compute2-2 ~]# hosted-engine --deploy [ INFO ] Stage: Initializing Continuing will configure this host for serving as hypervisor and create a VM where you have to install oVirt Engine afterwards. Are you sure you want to continue? (Yes, No)[Yes]: Yes [ INFO ] Generating a temporary VNC password. [ INFO ] Stage: Environment setup Configuration files: [] Log file: /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20141216144036-30j0wk.log Version: otopi-1.3.0 (otopi-1.3.0-1.el7) [ INFO ] Hardware supports virtualization [ INFO ] Bridge ovirtmgmt already created [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment setup [ ERROR ] The following VMs has been found: ac4c8d35-ca47-4394-afa8-1180c768128c [ ERROR ] Failed to execute stage 'Environment setup': Cannot setup Hosted Engine with other VMs running [ INFO ] Stage: Clean up [ INFO ] Generating answer file '/etc/ovirt-hosted-engine/answers.conf' [ INFO ] Answer file '/etc/ovirt-hosted-engine/answers.conf' has been updated [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination -- Thanks, Cong ________________________________ This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.ovirt.org/pipermail/users/attachments/20141216/34bdb2c2/attach…> ------------------------------ Message: 2 Date: Tue, 16 Dec 2014 18:16:03 -0500 From: Nathan Llaneza <ntllaneza573(a)gmail.com> To: users <users(a)ovirt.org> Subject: [ovirt-users] Server 2012 R2 + Intel Conroe Cluster Message-ID: <CAMkYohUBA_QVeRHo+yKYm5XTe8JYBemUfTbK4gwzS1WYzpbdCw(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Hey All, I think I have found a bug in oVirt 3.4.4. We just bought a new server that supports the Conroe CPU model, and I am trying to install Server 2012 R2 without luck. I keep getting error code 0x000000C4. The problem is while Windows is still to load into its pre-installation environment it cashes and then immediately resets. This is a continuous loop. I have found a way to install Server 2012 R2. Move the cluster away from the Conroe Family (in my case Penryn). Thanks for all you do. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.ovirt.org/pipermail/users/attachments/20141216/48265917/attach…> ------------------------------ Message: 3 Date: Fri, 12 Dec 2014 11:14:40 -0500 From: Brent Hartzell <brent.hartzell(a)outlook.com> To: <users(a)ovirt.org> Subject: [ovirt-users] alternate method of fencing Message-ID: <BLU406-EAS4159135A9D7BC80AB172E758D600(a)phx.gbl> Content-Type: text/plain; charset="us-ascii" Is there a way to force oVirt to place a host into maintenance mode automatically when a problem occurs? The problem we have is separate networks for everything: 2 public nics which are bonded active/backup for internet access 4 bonded gigabit nics for our Gluster network 1 IPMI The ipmi is on a completely different network, not attached to anything else other than a VPN. /// Our cluster servers shared Gluster & hypervisor on the same hosts, which works great however, all are 1U servers so we don't have room for another NIC to dedicate to just an ipmi network connection in addition to the ipmi card itself. Even if the PSU on a host fails, then the ipmi power management is useless anyhow and the VM's on that host will not be moved. I've tested putting a host into maintenance mode with running VM's and it will auto-migrate the VM's without issue. Is there a way to make oVirt just force a host into maintenance mode if there's some sort of problem or some other fencing mechanism that will allow the VM's to be migrated to another host? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.ovirt.org/pipermail/users/attachments/20141212/9db1e791/attach…> ------------------------------ Message: 4 Date: Tue, 16 Dec 2014 13:44:22 +0300 From: Roman Nikolayevich Drovalev <drovalev(a)kaluga-gov.ru> To: Nir Soffer <nsoffer(a)redhat.com>, "users(a)ovirt.org"@kaluga-gov.ru Subject: Re: [ovirt-users] Don't start vm Message-ID: <OF0CF7416C.ABB8F3CC-ON43257DB0.003E3C0E-43257DB0.00406F2F(a)kaluga-gov.ru> Content-Type: text/plain; charset="us-ascii" Hi, > > > > Hi, > > answer below > > > > > > Nir Soffer <nsoffer(a)redhat.com> > > > > > > > > > > Hi, > > > > > > > > > > > > I attach the file. Below log in the vdsm.log.62.xz > > > > > > > > > > > > The given nonexistent disk has probably appeared after template > > > > removal > > > > > > from which it has been created. > > > > > > BUT it was independent and before problems was not, after template > > > > > > removal! > > > > > > The disk exists, but at it has changed ID! > > > > > > > > > > I don't understand this description. > > > > > > > > > > Can you describe to steps to reproduce this issue? > > > > > > > > > > Guessing from your description: > > > > > 1. Create vm with x disks > > > > > 2. Create template > > > > > 3. Create vm from template > > > > > 4. Remove template > > > > > ? > > > > > > > > Yes. > > > > 1. Create vm with x disks on the DS 3524 through FC (multipathd on > > vdsm) > > > > 2. Create template > > > > 3. Create vm (independent) from template > > > > 4. Start vm and job in the vm > > > > 5. Remove template > > > > 6. Stop vm > > > > 7. Don`t start vm with error > > > > > > Do you mean - start vm fail with error about missing lv? > Yes > > > > > > > > 8. seek it disk - #lsblk > > > > > > Can you share the output of lsblk both before and after you stop the vm? No, since vm does not start! > > > > > > > > 9. many command with block 253:20 > > > > > > Not sure what do you mean by that > > You did not explain what you mean Hm, ?? vgchange .... > > > > Note: do *not* activate all lvs using "vgchange -a y" > > > Only vdsm should activate its volumes. > > > > OK! If vm don`t start, how to take data from vm? > > Of course if you need to troubshoot the system, and the vm is not > running, there is no problem to access the lv directly. > > Even then, you should *not* activate all lvs in a vg using > > vgchange -a y > > But activate only the lv you want to access using > > lvchange -a y Thank you, did not know > > > > > > > > > > 10. mount finded lvm in lvm volume and save data > > > > > > Mount? how mount is related to lvm? > > > > VM disk is lv on vdsm. I mounted lv, inside lvm on lv vdsm! > > You mean you activate the lv on the host? Yes, intro LVM vdsm > > > > > 12. reboot all vdsm host > > > > 13. dont't find ID it disk! ID it disk changed! > > > > > > Please share output of lvs both before and after the vm is stopped. > > > > Before > > -/dev/9d53ecef-8bfc-470b-8867-836bfa7df137/ > fb8466c9-0867-4e73-8362-2c95eea89a83 > > After - > > /dev/9d53ecef-8bfc-470b-8867-836bfa7df137/33b905e2-23df-49a9- > b772-4ebda3b0cd22 > > This not the output of lvs, these are the symlinks to the active lvs. > > Can you share the lvs output before and after the vm is stopped? No, since the vm does not start! > > > > > Now the problem disk has again received old ID(lvdisplay), BUT I have > > already removed it! > > I'm not sure what you mean. Can you share the output of lvdisplay before > and after the operation? > Already is not present, I have removed this problem disk > > > > The Mysticism! > > > > At me 3 disks on 9 GB, 5 days ago I have removed them. Now I them see till > > now (lvdisplay on the vdsm host) Why? > > Did you update lvm cache using "pvscan --cache"? No. I should after each operation with disks, do in the console "pvscan - cache"? > > > > > In general my problem has begun that on Windows 2008 Vm the empty seat has > > come to an end. > > What do you mean by that? This is first problem! Second problem - don't start the vm. > > > I have expanded volume in web gui. When I began to expand > > a disk in VM - error. > > > lvdisplay on the vdsm host has shown the old size of > > a disk! > > Is the volume preallocated or thin provisioned? All my disks - prelocated. > > Preallocated volumes are extended when you modify the volume size in > engine ui (as you described). Thin provisioned volumes are extended > only when the available space is bellow a threshold, so the lv > size will not change after you modify the volume size. > > > > > Sometimes normally all works! > > Do you mean that now everything works? The VM it has been removed, since for a week I could not start it! Now all works on others VM. But there were 2 problems! My problem to understand, that I have made not so or it is a problem oVirt. I wish to use oVirt, but is not assured of it because of these problems! > > > > > How I understand, probably, "all ok" when you work with VM which are on > > SPM host??! > > Lost you here. It agree, a head around )) Thanks Roma -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.ovirt.org/pipermail/users/attachments/20141216/78dbbd5d/attach…> ------------------------------ _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users End of Users Digest, Vol 39, Issue 104 ************************************** ------=_Part_11273251_1557423152.1418807793774 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"font-family: georgia,serif; font-size: 12pt; colo= r: #000000"><div><span style=3D"color: #333333; font-family: monospace; fon= t-size: 13.333333015441895px; background-color: #fdfdfd;" data-mce-style=3D= "color: #333333; font-family: monospace; font-size: 13.333333015441895px; b= ackground-color: #fdfdfd;"></span><span style=3D"color: #333333; font-famil= y: monospace; font-size: 13.333333015441895px; background-color: #fdfdfd;" = data-mce-style=3D"color: #333333; font-family: monospace; font-size: 13.333= 333015441895px; background-color: #fdfdfd;">FQDN or fully qualified domain = name means that you have to reserve in your DNS a name corresponding to IP = received by HE VM from DHCP.</span></div><div><span style=3D"color: #333333= ; font-family: monospace; font-size: 13.333333015441895px; background-color= : #fdfdfd;" data-mce-style=3D"color: #333333; font-family: monospace; font-= size: 13.333333015441895px; background-color: #fdfdfd;">IP address should b= e reserved for the VM at DHCP.</span></div><div><span style=3D"color: #3333= 33; font-family: monospace; font-size: 13.333333015441895px; background-col= or: #fdfdfd;" data-mce-style=3D"color: #333333; font-family: monospace; fon= t-size: 13.333333015441895px; background-color: #fdfdfd;"><br></span></div>= <div><span style=3D"color: #333333; font-family: monospace; font-size: 13.3= 33333015441895px; background-color: #fdfdfd;" data-mce-style=3D"color: #333= 333; font-family: monospace; font-size: 13.333333015441895px; background-co= lor: #fdfdfd;">I advise not to use manual IP to FQDN at your host, as this = will lead to many confusions, especially when you'll have more than a singl= e host machine, but you always can configure at your /etc/hosts file the FQ= DN corresponding to IP address given to HE VM.</span></div><div><span style= =3D"color: #333333; font-family: monospace; font-size: 13.333333015441895px= ; background-color: #fdfdfd;" data-mce-style=3D"color: #333333; font-family= : monospace; font-size: 13.333333015441895px; background-color: #fdfdfd;"><= br></span></div><div><span style=3D"color: #333333; font-family: monospace;= font-size: 13.333333015441895px; background-color: #fdfdfd;" data-mce-styl= e=3D"color: #333333; font-family: monospace; font-size: 13.333333015441895p= x; background-color: #fdfdfd;"><br></span></div><div><br></div><div><br></d= iv><div><span name=3D"x"></span><br>Thanks in advance.<br><div><br></div>Be= st regards,<br>Nikolai<br>____________________<br>Nikolai Sednev<br>Senior = Quality Engineer at Compute team<br>Red Hat Israel<br>34 Jerusalem Road,<br= >Ra'anana, Israel 43501<br><div><br></div>Tel:       +972 &n= bsp; 9 7692043<br>Mobile: +972 52 7342734<br>Email: nsednev(a)redhat.com<br>I= RC: nsednev<span name=3D"x"></span><br></div><div><br></div><hr id=3D"zwchr= "><div style=3D"color:#000;font-weight:normal;font-style:normal;text-decora= tion:none;font-family:Helvetica,Arial,sans-serif;font-size:12pt;"><b>From: = </b>users-request(a)ovirt.org<br><b>To: </b>users(a)ovirt.org<br><b>Sent: </b>W= ednesday, December 17, 2014 1:19:12 AM<br><b>Subject: </b>Users Digest, Vol= 39, Issue 104<br><div><br></div>Send Users mailing list submissions to<br>=         users(a)ovirt.org<br><div><br= ></div>To subscribe or unsubscribe via the World Wide Web, visit<br> &= nbsp;      http://lists.ovirt.org/mailman/lis= tinfo/users<br>or, via email, send a message with subject or body 'help' to= <br>        users-request(a)ovirt.org= <br><div><br></div>You can reach the person managing the list at<br> &= nbsp;      users-owner(a)ovirt.org<br><div><br>= </div>When replying, please edit your Subject line so it is more specific<b= r>than "Re: Contents of Users digest..."<br><div><br></div><br>Today's Topi= cs:<br><div><br></div>   1.  FQDN for vm creating with hoste= d-engine (Yue, Cong)<br>   2.  Server 2012 R2 + Intel Conroe= Cluster (Nathan Llaneza)<br>   3.  alternate method of fenc= ing (Brent Hartzell)<br>   4. Re:  Don't start vm (Roman Nik= olayevich Drovalev)<br><div><br></div><br>---------------------------------= -------------------------------------<br><div><br></div>Message: 1<br>Date:= Tue, 16 Dec 2014 14:44:44 -0800<br>From: "Yue, Cong" <Cong_Yue@alliedte= lesis.com><br>To: "users(a)ovirt.org" <users(a)ovirt.org><br>Subject: = [ovirt-users] FQDN for vm creating with hosted-engine<br>Message-ID:<br>&nb= sp;       <ED08B56256B38842A463A2A080= 4C5AC0326ACA3F65(a)svr-ca-exch1.atg.lc><br>Content-Type: text/plain; chars= et=3D"us-ascii"<br><div><br></div>Hi<br><div><br></div><br><div><br></div>N= ow I am trying to confirm KVM's HA with ovirt, and doing the walk through a= s the following guide.<br><div><br></div>http://community.redhat.com/blog/2= 014/10/up-and-running-with-ovirt-3-5/<br><div><br></div><br><div><br></div>= During the VM setting, FQDN is asked, what FQDN means about? Does it mean t= he hostname of VM host? In my case, it is compute2-2.<br><div><br></div>The= following is my hosts file, my VM host and storage is 10.0.0.92.<br><div><= br></div>And I am trying to assign 10.0.0.95 to the hosted VM.<br><div><br>= </div>---<br><div><br></div>[root@compute2-2 ~]# cat /etc/hosts<br><div><br= ></div>10.0.0.93 compute2-2 nfs2-2<br><div><br></div>10.0.0.95 ovrit-test<b= r><div><br></div>127.0.0.1   localhost localhost.localdomain localhost= 4 localhost4.localdomain4<br><div><br></div>::1        = localhost localhost.localdomain localhost6 localhost6.localdomain6<br><div= ><br></div>----<br><div><br></div>Also how I can remove the VM I installed,= as for when I try to do hosted-engine --deploy, it shows<br><div><br></div= ><br><div><br></div>---<br><div><br></div>[root@compute2-2 ~]# hosted-engin= e --deploy [ INFO  ] Stage: Initializing<br><div><br></div> &nbsp= ;        Continuing will configure this host for servin= g as hypervisor and create a VM where you have to install oVirt Engine afte= rwards.<br><div><br></div>          Are you s= ure you want to continue? (Yes, No)[Yes]: Yes [ INFO  ] Generating a t= emporary VNC password.<br><div><br></div>[ INFO  ] Stage: Environment = setup<br><div><br></div>          Configurati= on files: []<br><div><br></div>          Log = file:<br><div><br></div>/var/log/ovirt-hosted-engine-setup/ovirt-hosted-eng= ine-setup-20141216144036-30j0wk.log<br><div><br></div>     &= nbsp;    Version: otopi-1.3.0 (otopi-1.3.0-1.el7) [ INFO  ] = Hardware supports virtualization [ INFO  ] Bridge ovirtmgmt already cr= eated [ INFO  ] Stage: Environment packages setup [ INFO  ] Stage= : Programs detection [ INFO  ] Stage: Environment setup [ ERROR ] The = following VMs has been found: ac4c8d35-ca47-4394-afa8-1180c768128c<br><div>= <br></div>[ ERROR ] Failed to execute stage 'Environment setup': Cannot set= up Hosted Engine with other VMs running [ INFO  ] Stage: Clean up [ IN= FO  ] Generating answer file '/etc/ovirt-hosted-engine/answers.conf'<b= r><div><br></div>[ INFO  ] Answer file '/etc/ovirt-hosted-engine/answe= rs.conf' has been updated [ INFO  ] Stage: Pre-termination [ INFO &nbs= p;] Stage: Termination<br><div><br></div>--<br><div><br></div>Thanks,<br><d= iv><br></div>Cong<br><div><br></div><br>________________________________<br= >This e-mail message is for the sole use of the intended recipient(s) and m= ay contain confidential and privileged information. Any unauthorized review= , use, disclosure or distribution is prohibited. If you are not the intende= d recipient, please contact the sender by reply e-mail and destroy all copi= es of the original message. If you are the intended recipient, please be ad= vised that the content of this message is subject to access, review and dis= closure by the sender's e-mail System Administrator.<br>-------------- next= part --------------<br>An HTML attachment was scrubbed...<br>URL: <http= ://lists.ovirt.org/pipermail/users/attachments/20141216/34bdb2c2/attachment= -0001.html><br><div><br></div>------------------------------<br><div><br= ></div>Message: 2<br>Date: Tue, 16 Dec 2014 18:16:03 -0500<br>From: Nathan = Llaneza <ntllaneza573(a)gmail.com><br>To: users <users(a)ovirt.org>= <br>Subject: [ovirt-users] Server 2012 R2 + Intel Conroe Cluster<br>Message= -ID:<br>        <CAMkYohUBA_QVeR= Ho+yKYm5XTe8JYBemUfTbK4gwzS1WYzpbdCw(a)mail.gmail.com><br>Content-Type: te= xt/plain; charset=3D"utf-8"<br><div><br></div>Hey All,<br><div><br></div>I = think I have found a bug in oVirt 3.4.4. We just bought a new server that<b= r>supports the Conroe CPU model, and I am trying to install Server 2012 R2<= br>without luck. I keep getting error code 0x000000C4. The problem is while= <br>Windows is still to load into its pre-installation environment it cashe= s<br>and then immediately resets. This is a continuous loop. I have found a= way<br>to install Server 2012 R2. Move the cluster away from the Conroe Fa= mily (in<br>my case Penryn). Thanks for all you do.<br>-------------- next = part --------------<br>An HTML attachment was scrubbed...<br>URL: <http:= //lists.ovirt.org/pipermail/users/attachments/20141216/48265917/attachment-= 0001.html><br><div><br></div>------------------------------<br><div><br>= </div>Message: 3<br>Date: Fri, 12 Dec 2014 11:14:40 -0500<br>From: Brent Ha= rtzell <brent.hartzell(a)outlook.com><br>To: <users(a)ovirt.org><br= >Subject: [ovirt-users] alternate method of fencing<br>Message-ID: <BLU4= 06-EAS4159135A9D7BC80AB172E758D600(a)phx.gbl><br>Content-Type: text/plain;= charset=3D"us-ascii"<br><div><br></div>Is there a way to force oVirt to pl= ace a host into maintenance mode<br>automatically when a problem occurs? Th= e problem we have is separate<br>networks for everything:<br><div><br></div= > <br><div><br></div>2 public nics which are bonded active/backup for = internet access<br><div><br></div>4 bonded gigabit nics for our Gluster net= work<br><div><br></div>1 IPMI <br><div><br></div> <br><div><br></div>T= he ipmi is on a completely different network, not attached to anything else= <br>other than a VPN. <br><div><br></div> <br><div><br></div>///<br><d= iv><br></div> <br><div><br></div>Our cluster servers shared Gluster &a= mp; hypervisor on the same hosts, which<br>works great however, all are 1U = servers so we don't have room for another<br>NIC to dedicate to just an ipm= i network connection in addition to the ipmi<br>card itself. Even if the PS= U on a host fails, then the ipmi power management<br>is useless anyhow and = the VM's on that host will not be moved.<br><div><br></div> <br><div><= br></div>I've tested putting a host into maintenance mode with running VM's= and it<br>will auto-migrate the VM's without issue. Is there a way to make= oVirt just<br>force a host into maintenance mode if there's some sort of p= roblem or some<br>other fencing mechanism that will allow the VM's to be mi= grated to another<br>host?<br><div><br></div> <br><div><br></div>&nbsp= ;<br><div><br></div>-------------- next part --------------<br>An HTML atta= chment was scrubbed...<br>URL: <http://lists.ovirt.org/pipermail/users/a= ttachments/20141212/9db1e791/attachment.html><br><div><br></div>--------= ----------------------<br><div><br></div>Message: 4<br>Date: Tue, 16 Dec 20= 14 13:44:22 +0300<br>From: Roman Nikolayevich Drovalev <drovalev@kaluga-= gov.ru><br>To: Nir Soffer <nsoffer(a)redhat.com>,   &= nbsp;    "users(a)ovirt.org"@kaluga-gov.ru<br>Subject: Re= : [ovirt-users] Don't start vm<br>Message-ID:<br>    &n= bsp;   <OF0CF7416C.ABB8F3CC-ON43257DB0.003E3C0E-43257DB0.= 00406F2F(a)kaluga-gov.ru><br>       &nb= sp;<br>Content-Type: text/plain; charset=3D"us-ascii"<br><div><br></div>Hi,= <br><div><br></div><br>> > <br>> > Hi,<br>> > answer bel= ow<br>> > <br>> > > > Nir Soffer <nsoffer(a)redhat.com&g= t;<br>> > > > <br>> > > > > > Hi,<br>> &gt= ; > > > > <br>> > > > > > I attach the file. = Below log in the vdsm.log.62.xz<br>> > > > > > <br>> &= gt; > > > > The given nonexistent disk has probably appeared af= ter <br>template<br>> > > > removal<br>> > > > >= > from which it has been created.<br>> > > > > > BUT = it was independent and before problems was not, after <br>template<br>> = > > > > > removal!<br>> > > > > > The disk= exists, but at it has changed ID!<br>> > > > > <br>> &gt= ; > > > I don't understand this description.<br>> > > &gt= ; > <br>> > > > > Can you describe to steps to reproduce = this issue?<br>> > > > > <br>> > > > > Guessi= ng from your description:<br>> > > > > 1. Create vm with x d= isks<br>> > > > > 2. Create template<br>> > > > = > 3. Create vm from template<br>> > > > > 4. Remove templ= ate<br>> > > > > ?<br>> > > > <br>> > >= > Yes.<br>> > > > 1. Create vm with x disks on the DS 3524 = through FC (multipathd on<br>> > vdsm)<br>> > > > 2. Crea= te template<br>> > > > 3. Create vm (independent) from template= <br>> > > > 4. Start vm and job in the vm<br>> > > &gt= ; 5. Remove template<br>> > > > 6. Stop vm<br>> > > &g= t; 7. Don`t start vm with error<br>> > > <br>> > > Do you= mean - start vm fail with error about missing lv?<br>> <br><div><br></d= iv>Yes<br><div><br></div><br> <br>> <br>> > > <br>> &gt= ; > > 8. seek it disk - #lsblk<br>> > > <br>> > > C= an you share the output of lsblk both before and after you stop the <br>vm?= <br><div><br></div>No,  since vm does not start!<br><div><br></div><br= >> <br>> > > <br>> > > > 9. many command with block= 253:20<br>> > > <br>> > > Not sure what do you mean by t= hat<br>> <br>> You did not explain what you mean<br><div><br></div>Hm= , ?? vgchange ....<br><div><br></div>> <br>> > > Note: do *not*= activate all lvs using "vgchange -a y"<br>> > > Only vdsm should = activate its volumes.<br>> > <br>> > OK! If vm don`t start, how= to take data from vm?<br>> <br>> Of course if you need to troubshoot= the system, and the vm is not<br>> running, there is no problem to acce= ss the lv directly.<br>> <br>> Even then, you should *not* activate a= ll lvs in a vg using <br>> <br>>     vgchange -a y<br>> = <br>> But activate only the lv you want to access using<br>> <br>>=     lvchange -a y<br><div><br></div>Thank you, did not know<br><= div><br></div>> <br>> > <br>> > > <br>> > > >= 10. mount finded  lvm in lvm volume and save data<br>> > > <= br>> > > Mount? how mount is related to lvm?<br>> > <br>>= > VM disk is lv on vdsm. I mounted lv, inside lvm on lv vdsm!<br>> <= br>> You mean you activate the lv on the host?<br><div><br></div>Yes, in= tro LVM vdsm<br><div><br></div><br>> <br>> > > > 12. reboot = all vdsm host<br>> > > > 13. dont't find ID it disk! ID it disk= changed!<br>> > > <br>> > > Please share output of lvs b= oth before and after the vm is stopped.<br>> > <br>> > Before<b= r>> > -/dev/9d53ecef-8bfc-470b-8867-836bfa7df137/<br>> fb8466c9-08= 67-4e73-8362-2c95eea89a83<br>> > After   -<br>> > /dev/9d5= 3ecef-8bfc-470b-8867-836bfa7df137/33b905e2-23df-49a9-<br>> b772-4ebda3b0= cd22<br>> <br>> This not the output of lvs, these are the symlinks to= the active lvs.<br>> <br>> Can you share the lvs output before and a= fter the vm is stopped?<br><div><br></div><br>No,  since the vm does n= ot start!<br><div><br></div>> <br>> > <br>> > Now the proble= m disk has again received old ID(lvdisplay), BUT I have<br>> > alread= y removed it!<br>> <br>> I'm not sure what you mean. Can you share th= e output of lvdisplay before<br>> and after the operation?<br>> <br><= div><br></div>Already is not present, I have removed this problem disk<br><= div><br></div><br>> > <br>> > The Mysticism!<br>> > <br>&= gt; > At me 3 disks on 9 GB, 5 days ago I have removed them. Now I them = see <br>till<br>> > now (lvdisplay on the vdsm host) Why?<br>> <br= >> Did you update lvm cache using "pvscan --cache"?<br><div><br></div>No= . I should after each operation with disks, do in the console "pvscan - <br= >cache"?<br><div><br></div><br>> <br>> > <br>> > In general = my problem has begun that on Windows 2008 Vm the empty seat <br>has<br>>= > come to an end.<br>> <br>> What do you mean by that?<br><div><b= r></div>This is first problem! Second problem - don't start the vm. <br><di= v><br></div>> <br>> > I have expanded volume in web gui. When I be= gan to expand<br>> > a disk in VM - error.<br>> <br>> > lvdi= splay on the vdsm host has shown the old size of<br>> > a disk!<br>&g= t; <br>> Is the volume preallocated or thin provisioned?<br><div><br></d= iv>All my disks - prelocated.<br><div><br></div>> <br>> Preallocated = volumes are extended when you modify the volume size in<br>> engine ui (= as you described). Thin provisioned volumes are extended<br>> only when = the available space is bellow a threshold, so the lv<br>> size will not = change after you modify the volume size.<br>> <br>> > <br>> &gt= ; Sometimes normally all works!<br>> <br>> Do you mean that now every= thing works?<br><div><br></div><br>The VM it has been removed, since for a = week I could not start it!<br><div><br></div>Now all works on others VM. Bu= t there were 2 problems! My problem to <br>understand, that I have made not= so or it is a problem oVirt. <br>I wish to use oVirt, but is not assured o= f it because of these problems!<br><div><br></div>> <br>> > <br>&g= t; > How I understand, probably, "all ok" when you work with VM which ar= e <br>on<br>> > SPM host??!<br>> <br>> Lost you here.<br><div><= br></div>It agree, a head around ))<br><div><br></div><br>Thanks<br><div><b= r></div>Roma<br>-------------- next part --------------<br>An HTML attachme= nt was scrubbed...<br>URL: <http://lists.ovirt.org/pipermail/users/attac= hments/20141216/78dbbd5d/attachment.html><br><div><br></div>------------= ------------------<br><div><br></div>______________________________________= _________<br>Users mailing list<br>Users(a)ovirt.org<br>http://lists.ovirt.or= g/mailman/listinfo/users<br><div><br></div><br>End of Users Digest, Vol 39,= Issue 104<br>**************************************<br></div><div><br></di= v></div></body></html> ------=_Part_11273251_1557423152.1418807793774--

1 0

[QE][ACTION REQUIRED] oVirt 3.6.0 status
by Sandro Bonazzola 17 Dec '14

17 Dec '14

Hi, Release management for 3.6.0 [1] has been updated following the new release process[2]. ACTION: Feature proposed for 3.6.0 must now be collected in the 3.6 Google doc [3] and reviewed by maintainers. Finished the review process, the remaining key milestones for this release will be scheduled. For reference, external project schedules we're tracking are: Fedora 21: 2014-12-09 (RELEASED) Fedora 22: no earlier than 2015-05-19 Foreman 1.8.0: 2015-03-01 GlusterFS 3.7: 2015-04-29 OpenStack Kilo: 2015-04-30 QEMU 2.1.3: 2014-12-29 QEMU 2.2.0: 2014-12-09 (RELEASED) The tracker bug for 3.6.0 [4] currently shows no blockers. There are 461 bugs [5] targeted to 3.6.0. Excluding node and documentation bugs we have 438 bugs [6] targeted to 3.6.0. [1] http://www.ovirt.org/OVirt_3.6_Release_Management [2] http://www.ovirt.org/Release_process [3] http://goo.gl/9X3G49 [4] https://bugzilla.redhat.com/show_bug.cgi?id=1155425 [5] http://goo.gl/zwkF3r [6] http://goo.gl/ZbUiMc -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

[QE][ACTION REQUIRED] oVirt 3.5.1 RC status
by Sandro Bonazzola 17 Dec '14

17 Dec '14

Hi, according to the new oVirt 3.5.1 schedule, we're going to start composing oVirt 3.5.1 RC on *2015-01-07 08:00 UTC* from 3.5 branch. The new GA release date is now targeted to 2015-01-14. VDSM team decided to release a new vdsm package as async release for 3.5.0. Due to issues with Fedora Koji Build System packages are not yet ready to be released. ACTION: VDSM team to follow up when the packages will be ready to be released. The bug tracker [1] shows 1 open blocker: Bug ID Whiteboard Status Summary 1160846 sla NEW Can't add disk to VM without specifying disk profile when the storage domain has more than one disk profile In order to stabilize the release a new branch ovirt-engine-3.5.1 will be created from the same git hash used for composing the RC. - ACTION: assignee please provide ETA on above blocker Maintainers: - Please be sure that 3.5 snapshot allow to create VMs - Please be sure that no pending patches are going to block the release - If any patch must block the RC release please raise the issue as soon as possible. There are still 62 bugs [2] targeted to 3.5.1. Excluding node and documentation bugs we still have 41 bugs [3] targeted to 3.5.1. Maintainers / Assignee: - Please add the bugs to the tracker if you think that 3.5.1 should not be released without them fixed. - ACTION: Please update the target to 3.5.2 or later for bugs that won't be in 3.5.1: it will ease gathering the blocking bugs for next releases. - ACTION: Please fill release notes, the page has been created here [4] Community: - If you're testing oVirt 3.5 nightly snapshot, please add yourself to the test page [5] [1] http://bugzilla.redhat.com/1155170 [2] http://goo.gl/7G0PDV [3] http://goo.gl/6gUbVr [4] http://www.ovirt.org/OVirt_3.5.1_Release_Notes [5] http://www.ovirt.org/Testing/oVirt_3.5.1_Testing Thanks, -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

FQDN for vm creating with hosted-engine
by Yue, Cong 17 Dec '14

17 Dec '14

--_000_ED08B56256B38842A463A2A0804C5AC0326ACA3F65svrcaexch1atg_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi Now I am trying to confirm KVM's HA with ovirt, and doing the walk through = as the following guide. http://community.redhat.com/blog/2014/10/up-and-running-with-ovirt-3-5/ During the VM setting, FQDN is asked, what FQDN means about? Does it mean t= he hostname of VM host? In my case, it is compute2-2. The following is my hosts file, my VM host and storage is 10.0.0.92. And I am trying to assign 10.0.0.95 to the hosted VM. --- [root@compute2-2 ~]# cat /etc/hosts 10.0.0.93 compute2-2 nfs2-2 10.0.0.95 ovrit-test 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdoma= in4 ::1 localhost localhost.localdomain localhost6 localhost6.localdoma= in6 ---- Also how I can remove the VM I installed, as for when I try to do hosted-en= gine --deploy, it shows --- [root@compute2-2 ~]# hosted-engine --deploy [ INFO ] Stage: Initializing Continuing will configure this host for serving as hypervisor and= create a VM where you have to install oVirt Engine afterwards. Are you sure you want to continue? (Yes, No)[Yes]: Yes [ INFO ] = Generating a temporary VNC password. [ INFO ] Stage: Environment setup Configuration files: [] Log file: /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20141216144036= -30j0wk.log Version: otopi-1.3.0 (otopi-1.3.0-1.el7) [ INFO ] Hardware suppo= rts virtualization [ INFO ] Bridge ovirtmgmt already created [ INFO ] Sta= ge: Environment packages setup [ INFO ] Stage: Programs detection [ INFO = ] Stage: Environment setup [ ERROR ] The following VMs has been found: ac4c= 8d35-ca47-4394-afa8-1180c768128c [ ERROR ] Failed to execute stage 'Environment setup': Cannot setup Hosted = Engine with other VMs running [ INFO ] Stage: Clean up [ INFO ] Generatin= g answer file '/etc/ovirt-hosted-engine/answers.conf' [ INFO ] Answer file '/etc/ovirt-hosted-engine/answers.conf' has been upda= ted [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination -- Thanks, Cong ________________________________ This e-mail message is for the sole use of the intended recipient(s) and ma= y contain confidential and privileged information. Any unauthorized review,= use, disclosure or distribution is prohibited. If you are not the intended= recipient, please contact the sender by reply e-mail and destroy all copie= s of the original message. If you are the intended recipient, please be adv= ised that the content of this message is subject to access, review and disc= losure by the sender's e-mail System Administrator. --_000_ED08B56256B38842A463A2A0804C5AC0326ACA3F65svrcaexch1atg_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 14 (filtered medium)"> <style></style> </head> <body lang=3D"EN-US" link=3D"blue" vlink=3D"purple"> <div class=3D"WordSection1"> <p class=3D"MsoPlainText">Hi<o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">Now I am trying to confirm KVM's HA with ovirt, a= nd doing the walk through as the following guide.<o:p></o:p></p> <p class=3D"MsoPlainText"><a href=3D"http://community.redhat.com/blog/2014/= 10/up-and-running-with-ovirt-3-5/">http://community.redhat.com/blog/2014/10= /up-and-running-with-ovirt-3-5/</a><o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">During the VM setting, FQDN is asked, what FQDN m= eans about? Does it mean the hostname of VM host? In my case, it is compute= 2-2.<o:p></o:p></p> <p class=3D"MsoPlainText">The following is my hosts file, my VM host and st= orage is 10.0.0.92.<o:p></o:p></p> <p class=3D"MsoPlainText">And I am trying to assign 10.0.0.95 to the hosted= VM.<o:p></o:p></p> <p class=3D"MsoPlainText">---<o:p></o:p></p> <p class=3D"MsoPlainText">[root@compute2-2 ~]# cat /etc/hosts<o:p></o:p></p= > <p class=3D"MsoPlainText">10.0.0.93 compute2-2 nfs2-2<o:p></o:p></p> <p class=3D"MsoPlainText">10.0.0.95 ovrit-test<o:p></o:p></p> <p class=3D"MsoPlainText">127.0.0.1   localhost localhost.localdo= main localhost4 localhost4.localdomain4<o:p></o:p></p> <p class=3D"MsoPlainText">::1       &nbs= p; localhost localhost.localdomain localhost6 localhost6.localdomain6<o:p><= /o:p></p> <p class=3D"MsoPlainText">----<o:p></o:p></p> <p class=3D"MsoPlainText">Also how I can remove the VM I installed, as for = when I try to do hosted-engine --deploy, it shows<o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">---<o:p></o:p></p> <p class=3D"MsoPlainText">[root@compute2-2 ~]# hosted-engine --deploy [ INF= O  ] Stage: Initializing<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Continuing will configure this host for serving as hypervisor and cre= ate a VM where you have to install oVirt Engine afterwards.<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Are you sure you want to continue? (Yes, No)[Yes]: Yes [ INFO  ]= Generating a temporary VNC password.<o:p></o:p></p> <p class=3D"MsoPlainText">[ INFO  ] Stage: Environment setup<o:p></o:p= ></p> <p class=3D"MsoPlainText">        &= nbsp; Configuration files: []<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Log file:<o:p></o:p></p> <p class=3D"MsoPlainText">/var/log/ovirt-hosted-engine-setup/ovirt-hosted-e= ngine-setup-20141216144036-30j0wk.log<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Version: otopi-1.3.0 (otopi-1.3.0-1.el7) [ INFO  ] Hardware supp= orts virtualization [ INFO  ] Bridge ovirtmgmt already created [ INFO&= nbsp; ] Stage: Environment packages setup [ INFO  ] Stage: Programs de= tection [ INFO  ] Stage: Environment setup [ ERROR ] The following VMs has been found: ac4c8d35-ca4= 7-4394-afa8-1180c768128c<o:p></o:p></p> <p class=3D"MsoPlainText">[ ERROR ] Failed to execute stage 'Environment se= tup': Cannot setup Hosted Engine with other VMs running [ INFO  ] Stag= e: Clean up [ INFO  ] Generating answer file '/etc/ovirt-hosted-engine= /answers.conf'<o:p></o:p></p> <p class=3D"MsoPlainText">[ INFO  ] Answer file '/etc/ovirt-hosted-eng= ine/answers.conf' has been updated [ INFO  ] Stage: Pre-termination [ = INFO  ] Stage: Termination<o:p></o:p></p> <p class=3D"MsoPlainText">--<o:p></o:p></p> <p class=3D"MsoPlainText">Thanks,<o:p></o:p></p> <p class=3D"MsoPlainText">Cong<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> </div> <br> <hr> <font face=3D"Arial" color=3D"Gray" size=3D"1">This e-mail message is for t= he sole use of the intended recipient(s) and may contain confidential and p= rivileged information. Any unauthorized review, use, disclosure or distribu= tion is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy = all copies of the original message. If you are the intended recipient, plea= se be advised that the content of this message is subject to access, review= and disclosure by the sender's e-mail System Administrator.<br> </font> </body> </html> --_000_ED08B56256B38842A463A2A0804C5AC0326ACA3F65svrcaexch1atg_--

2 1

Ovirt Node Heartbeat Settings
by Punit Dambiwal 17 Dec '14

17 Dec '14

Hi, I want to know more about the Ovirt engine and host node heartbeat settings and interval....that means how and when the engine node consider the host node as dead or shoot the command to fence it for reboot.... Is there any way to modify those interval and settings to prevent the false-positive etc... Thanks, Punit

2 6

About translation of oVirt-engine-reports on Zanata.
by 张亚琪 17 Dec '14

17 Dec '14

hi all, I have forced on ovirt-engine-reports recently. I have found some little problem on Zanata. And the content of this project is not synchronize with the latest code.Would you update the project of Ovirt Engine Reports on Zanata. Thank you for your time. :)

1 0

Re: [ovirt-users] [RFI] oVirt 3.6 Planning
by Itamar Heim 17 Dec '14

17 Dec '14

On Dec 13, 2014 7:07 AM, Jason Greene <jason.greene(a)redhat.com> wrote: > > > On 12.09.2014 14:22, Itamar Heim wrote: > > > > With oVirt 3.5 nearing GA, time to ask for "what do you want to see in > > oVirt 3.6”? > > + Windows HV Support: https://bugzilla.redhat.com/show_bug.cgi?id=1125297 > Just to note you can do this today by either: - vdsm custom hook - change of engine config if you know your hosts are only 7.0 - iirc, also possible by editing the specific osinfo config file to add the flags there > Without these flags, my testing shows a completely idle 4 vcpu win slave > uses ~15% of a host core, which limits overcommit ability. With them it > goes down to 3.6% in my testing. hv_relaxed on its own shows no > improvement over idle time. > > Unfortunately there is a KVM kernel bug that leads to win hangs with > these flags, and so until RHEL gets 3.16, which looks like 7.1, only Fedora works: > > https://bugzilla.redhat.com/show_bug.cgi?id=1091818 > > + Ability to add local storage without putting the host in maintenance mode > This should work today. Only the wizard to 'configure local storage' requires this at it performs create DC, create cluster, move host to new cluster, add storage domain. The 'move host to new cluster' requires host to be in maint. Adding another local domain. Should not require this. > + Some out-of-the-box option for self-hosted engine without shared storage > (e.g. gluser, ceph, drdb, application directed replication, etc) > Focus here will be gluster for 3.6 Thanks, Itamar > > Thanks! > > -- > Jason T. Greene > WildFly Lead / JBoss EAP Platform Architect > JBoss, a division of Red Hat >

3 2

Complete CentOS 7 environment
by Aslam, Usman 16 Dec '14

16 Dec '14

We are upgrading hardware and I'm upgrading/rebuilding our Ovirt infrastructure. Are CentOS 7 host nodes supported? And can the engine be installed on CentOS 7? (3.5 repo isn't working for me) Thanks, Usman

8 12

Re: [ovirt-users] 3. vdsm losing connection to libvirt (Chris Adams)
by Nikolai Sednev 16 Dec '14

16 Dec '14

------=_Part_10957803_1008904620.1418749854056 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Hi, Can I get engine, libvirt, vdsm, mom, logs from host8 and connectivity log? Have you tried installing clean OSs on hosts, especially on problematic host? I'd also try to disable JSONRPC on hosts, by putting them to maintenance and then removing JSONRPC from the check box on all hosts, just to compare if it resolves the issue. Thanks in advance. Best regards, Nikolai ____________________ Nikolai Sednev Senior Quality Engineer at Compute team Red Hat Israel 34 Jerusalem Road, Ra'anana, Israel 43501 Tel: +972 9 7692043 Mobile: +972 52 7342734 Email: nsednev(a)redhat.com IRC: nsednev ----- Original Message ----- From: users-request(a)ovirt.org To: users(a)ovirt.org Sent: Tuesday, December 16, 2014 5:50:28 PM Subject: Users Digest, Vol 39, Issue 98 Send Users mailing list submissions to users(a)ovirt.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.ovirt.org/mailman/listinfo/users or, via email, send a message with subject or body 'help' to users-request(a)ovirt.org You can reach the person managing the list at users-owner(a)ovirt.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Users digest..." Today's Topics: 1. Re: Free Ovirt Powered Cloud (Lior Vernia) 2. gluster rpms not found (Pat Pierson) 3. vdsm losing connection to libvirt (Chris Adams) 4. Re: Creating new users on oVirt 3.5 (Donny Davis) 5. Re: gfapi, 3.5.1 (Alex Crow) ---------------------------------------------------------------------- Message: 1 Date: Tue, 16 Dec 2014 15:55:02 +0200 From: Lior Vernia <lvernia(a)redhat.com> To: Donny Davis <donny(a)cloudspin.me> Cc: users(a)ovirt.org Subject: Re: [ovirt-users] Free Ovirt Powered Cloud Message-ID: <549039B6.2010804(a)redhat.com> Content-Type: text/plain; charset=ISO-8859-1 Hi Donny, On 15/12/14 18:24, Donny Davis wrote: > Hi guys, I'm providing a free public cloud solution entirely based on > vanilla oVirt called cloudspin.me <http://cloudspin.me> > This looks great! :) > It runs on IPv6, and I am looking for people to use the system, host > services and report back to me with their results. > Do you also use IPv6 internally in your deployment? e.g. assign IPv6 addresses to your hosts, storage domain, power management etc.? We'd be very interested to hear what works and what doesn't. And perhaps help push forward what doesn't, if you need it :) > Data I am looking for > > Connection Speed - Is it comparable to other services > > User experience - Are there any changes recommended > > Does it work for you - What does, and does not work for you. > > > > I am trying to get funding to keep this a free resource for everyone to > use. (not from here:) > > I am completely open to any and all suggestions, and or help with > things. I am a one man show at the moment. > > If anyone has any questions please email me back > > Donny D > > > > > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > ------------------------------ Message: 2 Date: Tue, 16 Dec 2014 09:08:57 -0500 From: Pat Pierson <ihasn2004(a)gmail.com> To: nathan(a)robotics.net Cc: "users(a)ovirt.org" <users(a)ovirt.org> Subject: [ovirt-users] gluster rpms not found Message-ID: <CAMRYiEiKL1MEGoHWjKtnhW3DXjouU0w3hs5zFx75sfBL8M4JaQ(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Nathan, Did you find a work around for this? I am running into the same issue. Is there a way to force vdsm to see gluster? Or a way to manually run the search so I can see why it fails? >*<> *nathan stratton | vp technology | broadsoft, inc | +1-240-404-6580 |www.broadsoft.com On Fri, Jun 20, 2014 at 11:01 AM, Nathan Stratton <nathan at robotics.net <http://lists.ovirt.org/mailman/listinfo/users>> wrote: >* Actually I have vdsm-gluster, that is why vdsm tries to find the gluster *>* packages. Is there a way I can run the vdsm gluster rpm search manually to *>* see what is going wrong? *>>* [root at virt01a <http://lists.ovirt.org/mailman/listinfo/users> ~]# yum list installed |grep vdsm *>* vdsm.x86_64 4.14.9-0.el6 @ovirt-3.4-stable *>>* vdsm-cli.noarch 4.14.9-0.el6 @ovirt-3.4-stable *>>* vdsm-gluster.noarch 4.14.9-0.el6 @ovirt-3.4-stable *>>* vdsm-python.x86_64 4.14.9-0.el6 @ovirt-3.4-stable *>>* vdsm-python-zombiereaper.noarch *>* vdsm-xmlrpc.noarch 4.14.9-0.el6 @ovirt-3.4-stable *>>>>* ><> *>* nathan stratton | vp technology | broadsoft, inc | +1-240-404-6580 <%2B1-240-404-6580> | *>* www.broadsoft.com <http://www.broadsoft.com/> *>>>* On Thu, Jun 19, 2014 at 8:39 PM, Andrew Lau <andrew at andrewklau.com <http://lists.ovirt.org/mailman/listinfo/users>> wrote: *>>>* You're missing vdsm-gluster *>>>>* yum install vdsm-gluster *>>>>* On Fri, Jun 20, 2014 at 6:24 AM, Nathan Stratton <nathan at robotics.net <http://lists.ovirt.org/mailman/listinfo/users>> *>>* wrote: *>>* > I am running ovirt 3.4 and have gluster installed: *>>* > *>>* > [root at virt01a <http://lists.ovirt.org/mailman/listinfo/users>]# yum list installed |grep gluster *>>* > glusterfs.x86_64 3.5.0-2.el6 @ovirt-glusterfs-epel *>>* > glusterfs-api.x86_64 3.5.0-2.el6 @ovirt-glusterfs-epel *>>* > glusterfs-cli.x86_64 3.5.0-2.el6 @ovirt-glusterfs-epel *>>* > glusterfs-fuse.x86_64 3.5.0-2.el6 @ovirt-glusterfs-epel *>>* > glusterfs-libs.x86_64 3.5.0-2.el6 @ovirt-glusterfs-epel *>>* > glusterfs-rdma.x86_64 3.5.0-2.el6 @ovirt-glusterfs-epel *>>* > glusterfs-server.x86_64 3.5.0-2.el6 @ovirt-glusterfs-epel *>>* > *>>* > However vdsm can't seem to find them: *>>* > *>>* > Thread-13::DEBUG::2014-06-19 *>>* > 16:15:57,250::caps::458::root::(_getKeyPackages) rpm package *>>* glusterfs-rdma *>>* > not found *>>* > Thread-13::DEBUG::2014-06-19 *>>* > 16:15:57,250::caps::458::root::(_getKeyPackages) rpm package *>>* glusterfs-fuse *>>* > not found *>>* > Thread-13::DEBUG::2014-06-19 *>>* > 16:15:57,251::caps::458::root::(_getKeyPackages) rpm package *>>* gluster-swift *>>* > not found *>>* > Thread-13::DEBUG::2014-06-19 *>>* > 16:15:57,252::caps::458::root::(_getKeyPackages) rpm package *>>* > gluster-swift-object not found *>>* > Thread-13::DEBUG::2014-06-19 *>>* > 16:15:57,252::caps::458::root::(_getKeyPackages) rpm package glusterfs *>>* not *>>* > found *>>* > Thread-13::DEBUG::2014-06-19 *>>* > 16:15:57,252::caps::458::root::(_getKeyPackages) rpm package *>>* > gluster-swift-plugin not found *>>* > Thread-13::DEBUG::2014-06-19 *>>* > 16:15:57,254::caps::458::root::(_getKeyPackages) rpm package *>>* > gluster-swift-account not found *>>* > Thread-13::DEBUG::2014-06-19 *>>* > 16:15:57,254::caps::458::root::(_getKeyPackages) rpm package *>>* > gluster-swift-proxy not found *>>* > Thread-13::DEBUG::2014-06-19 *>>* > 16:15:57,254::caps::458::root::(_getKeyPackages) rpm package *>>* > gluster-swift-doc not found *>>* > Thread-13::DEBUG::2014-06-19 *>>* > 16:15:57,255::caps::458::root::(_getKeyPackages) rpm package *>>* > glusterfs-server not found *>>* > Thread-13::DEBUG::2014-06-19 *>>* > 16:15:57,255::caps::458::root::(_getKeyPackages) rpm package *>>* > gluster-swift-container not found *>>* > Thread-13::DEBUG::2014-06-19 *>>* > 16:15:57,255::caps::458::root::(_getKeyPackages) rpm package *>>* > glusterfs-geo-replication not found *>>* > *>>* > Any ideas? *>>* > *>>* >><> *>>* > nathan stratton | vp technology | broadsoft, inc | +1-240-404-6580 <%2B1-240-404-6580> | *>>* > www.broadsoft.com <http://www.broadsoft.com/> *>>* > *>>* > _______________________________________________ *>>* > Users mailing list *>>* > Users at ovirt.org <http://lists.ovirt.org/mailman/listinfo/users> *>>* > http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users> *>>* > *>>>>-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.ovirt.org/pipermail/users/attachments/20140621/9b14c8fe/attach…> -- Patrick Pierson -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.ovirt.org/pipermail/users/attachments/20141216/58d14872/attach…> ------------------------------ Message: 3 Date: Tue, 16 Dec 2014 08:48:48 -0600 From: Chris Adams <cma(a)cmadams.net> To: users(a)ovirt.org Subject: [ovirt-users] vdsm losing connection to libvirt Message-ID: <20141216144848.GA1708(a)cmadams.net> Content-Type: text/plain; charset=us-ascii I have a oVirt setup that has three nodes, all running CentOS 7, with a hosted engine running CentOS 6. Two of the nodes (node8 and node9) are configured for hosted engine, and the third (node2) is just a "regular" node (as you might guess from the names, more nodes are coming as I migrate VMs to oVirt). On one node, node8, vdsm periodically loses its connection to libvirt, which causes vdsm to restart. There doesn't appear to be any trigger that I can see (not time of day, load, etc. related). The engine VM is up and running on node8 (don't know if that has anything to do with it). I get some entries in /var/log/messages repeated continuously; the "ovirt-ha-broker: sending ioctl 5401 to a partition" I mentioned before, and the following: Dec 15 20:56:23 node8 journal: User record for user '107' was not found: No such file or directory Dec 15 20:56:23 node8 journal: Group record for user '107' was not found: No such file or directory I don't think those have any relevance (don't know where they come from); filtering those out, I see: Dec 15 20:56:33 node8 journal: End of file while reading data: Input/output error Dec 15 20:56:33 node8 journal: Tried to close invalid fd 0 Dec 15 20:56:38 node8 journal: vdsm root WARNING connection to libvirt broken. ecode: 1 edom: 7 Dec 15 20:56:38 node8 journal: vdsm root CRITICAL taking calling process down. Dec 15 20:56:38 node8 journal: vdsm vds ERROR libvirt error Dec 15 20:56:38 node8 journal: ovirt-ha-broker mgmt_bridge.MgmtBridge ERROR Failed to getVdsCapabilities: Error 16 from getVdsCapabilities: Unexpected exception Dec 15 20:56:45 node8 journal: End of file while reading data: Input/output error Dec 15 20:56:45 node8 vdsmd_init_common.sh: vdsm: Running run_final_hooks Dec 15 20:56:45 node8 systemd: Starting Virtual Desktop Server Manager... <and then all the normal-looking vdsm startup> It is happening about once a day, but not at any regular interval or time (was 02:23 Sunday, then 20:56 Monday). vdsm.log has this at that time: Thread-601576::DEBUG::2014-12-15 20:56:38,715::BindingXMLRPC::1132::vds::(wrapper) client [127.0.0.1]::call getCapabilities with () {} Thread-601576::DEBUG::2014-12-15 20:56:38,718::utils::738::root::(execCmd) /sbin/ip route show to 0.0.0.0/0 table all (cwd None) Thread-601576::DEBUG::2014-12-15 20:56:38,746::utils::758::root::(execCmd) SUCCESS: <err> = ''; <rc> = 0 Thread-601576::WARNING::2014-12-15 20:56:38,754::libvirtconnection::135::root::(wrapper) connection to libvirt broken. ecode: 1 edom: 7 Thread-601576::CRITICAL::2014-12-15 20:56:38,754::libvirtconnection::137::root::(wrapper) taking calling process down. MainThread::DEBUG::2014-12-15 20:56:38,754::vdsm::58::vds::(sigtermHandler) Received signal 15 Thread-601576::DEBUG::2014-12-15 20:56:38,755::libvirtconnection::143::root::(wrapper) Unknown libvirterror: ecode: 1 edom: 7 level: 2 message: internal error: client socket is closed MainThread::DEBUG::2014-12-15 20:56:38,755::protocoldetector::135::vds.MultiProtocolAcceptor::(stop) Stopping Acceptor MainThread::INFO::2014-12-15 20:56:38,755::__init__::563::jsonrpc.JsonRpcServer::(stop) Stopping JsonRPC Server Detector thread::DEBUG::2014-12-15 20:56:38,756::protocoldetector::106::vds.MultiProtocolAcceptor::(_cleanup) Cleaning Acceptor MainThread::INFO::2014-12-15 20:56:38,757::vmchannels::188::vds::(stop) VM channels listener was stopped. MainThread::INFO::2014-12-15 20:56:38,758::momIF::91::MOM::(stop) Shutting down MOM MainThread::DEBUG::2014-12-15 20:56:38,759::task::595::Storage.TaskManager.Task::(_updateState) Task=`26c7680c-23e2-42bb-964c-272e778a168a`::moving from state init -> state preparing MainThread::INFO::2014-12-15 20:56:38,759::logUtils::44::dispatcher::(wrapper) Run and protect: prepareForShutdown(options=None) Thread-601576::ERROR::2014-12-15 20:56:38,755::BindingXMLRPC::1142::vds::(wrapper) libvirt error Traceback (most recent call last): File "/usr/share/vdsm/rpc/BindingXMLRPC.py", line 1135, in wrapper res = f(*args, **kwargs) File "/usr/share/vdsm/rpc/BindingXMLRPC.py", line 463, in getCapabilities ret = api.getCapabilities() File "/usr/share/vdsm/API.py", line 1245, in getCapabilities c = caps.get() File "/usr/share/vdsm/caps.py", line 615, in get caps.update(netinfo.get()) File "/usr/lib/python2.7/site-packages/vdsm/netinfo.py", line 812, in get nets = networks() File "/usr/lib/python2.7/site-packages/vdsm/netinfo.py", line 119, in networks allNets = ((net, net.name()) for net in conn.listAllNetworks(0)) File "/usr/lib/python2.7/site-packages/vdsm/libvirtconnection.py", line 129, in wrapper __connections.get(id(target)).pingLibvirt() File "/usr/lib64/python2.7/site-packages/libvirt.py", line 3642, in getLibVersion if ret == -1: raise libvirtError ('virConnectGetLibVersion() failed', conn=self) libvirtError: internal error: client socket is closed -- Chris Adams <cma(a)cmadams.net> ------------------------------ Message: 4 Date: Tue, 16 Dec 2014 07:57:16 -0700 From: "Donny Davis" <donny(a)cloudspin.me> To: "'Alon Bar-Lev'" <alonbl(a)redhat.com>, "'Fedele Stabile'" <fedele.stabile(a)fis.unical.it> Cc: users(a)ovirt.org Subject: Re: [ovirt-users] Creating new users on oVirt 3.5 Message-ID: <008801d01940$9682f2f0$c388d8d0$(a)cloudspin.me> Content-Type: text/plain; charset="us-ascii" Check out my write-up on AAA, I tried my best to break it down, and make it simple https://cloudspin.me/ovirt-simple-ldap-aaa/ -----Original Message----- From: users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] On Behalf Of Alon Bar-Lev Sent: Tuesday, December 16, 2014 1:49 AM To: Fedele Stabile Cc: users(a)ovirt.org Subject: Re: [ovirt-users] Creating new users on oVirt 3.5 ----- Original Message ----- > From: "Fedele Stabile" <fedele.stabile(a)fis.unical.it> > To: users(a)ovirt.org > Sent: Monday, December 15, 2014 8:05:28 PM > Subject: [ovirt-users] Creating new users on oVirt 3.5 > > Hello, > I have to create some users on my oVirt 3.5 infrastructure. > On FridayI was following istructions on > http://www.ovirt.org/LDAP_Quick_Start > LDAP Quick Start > so I correctly created a OpenLDAP server and a Kerberos service, but > this morning I read that the instructions are obsolete... > Now I'm trying to understand how to implement the new mechanism... but > I'm in troubles: > 1) run yum install ovirt-engine-extension-aaa-ldap > 2) copied files in /etc/ovirt-engine/extensions.d and modified the > name in fis.unical.it-auth(n/z).properties > 3) copied files in /etc/ovirt-engine/aaa but now I can't do anything > > Can you help me with newbye instructions to install the aaa-extensions? > Thank you very much > Fedele Stabile Hello, Have you read[1]? We of course need help in improving documentation :) Can you please send engine.log when starting up engine so I can see if there are any issues? Please make sure that at /etc/ovirt-engine/extensions.d you set the config.profile.file.1 to absolute file, /etc/ovirt-enigne/aaa/ as we wait for 3.5.1 to support relative names. The simplest sequence is: 1. copy recursive /usr/share/ovirt-engine-extension-aaa-ldap/examples/simple to /etc/ovirt-engine 2. edit /etc/ovirt-engine/extension.d/* replace ../aaa to /etc/ovirt-engine/aaa this is pending 3.5.1. 3. edit /etc/ovirt-engine/aaa/ldap1.properties and set vars.server, vars.user, vars.password to meet your setup. 4. restart engine. 5. send me engine.log Regards, Alon [1] http://gerrit.ovirt.org/gitweb?p=ovirt-engine-extension-aaa-ldap.git;a=blob; f=README;hb=HEAD _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users ------------------------------ Message: 5 Date: Tue, 16 Dec 2014 15:50:23 +0000 From: Alex Crow <acrow(a)integrafin.co.uk> To: users(a)ovirt.org Subject: Re: [ovirt-users] gfapi, 3.5.1 Message-ID: <549054BF.2090105(a)integrafin.co.uk> Content-Type: text/plain; charset=utf-8; format=flowed Hi, Anyone know if this is due to work correctly in the next iteration of 3.5? Thanks Alex On 09/12/14 10:33, Alex Crow wrote: > Hi, > > Will the vdsm patches to properly enable libgfapi storage for VMs (and > matching refactored code in the hosted-engine setup scripts) for VMs > make it into 3.5.1? It's not in the snapshots yet it seems. > > I notice it's in master/3.6 snapshot but something stops the HA stuff > in self-hosted setups from connecting storage: > > from Master test setup: > /var/log/ovirt-hosted-engine-ha/broker.log > > MainThread::INFO::2014-12-08 > 19:22:56,287::hosted_engine::222::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_get_hostname) > Found certificate common name: 172.17.10.50 > MainThread::WARNING::2014-12-08 > 19:22:56,395::hosted_engine::497::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) > Failed to connect storage, waiting '15' seconds before the next attempt > MainThread::WARNING::2014-12-08 > 19:23:11,501::hosted_engine::497::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) > Failed to connect storage, waiting '15' seconds before the next attempt > MainThread::WARNING::2014-12-08 > 19:23:26,610::hosted_engine::497::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) > Failed to connect storage, waiting '15' seconds before the next attempt > MainThread::WARNING::2014-12-08 > 19:23:41,717::hosted_engine::497::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) > Failed to connect storage, waiting '15' seconds before the next attempt > MainThread::WARNING::2014-12-08 > 19:23:56,824::hosted_engine::497::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) > Failed to connect storage, waiting '15' seconds before the next attempt > MainThread::ERROR::2014-12-08 > 19:24:11,840::hosted_engine::500::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) > Failed trying to connect storage: > MainThread::ERROR::2014-12-08 > 19:24:11,840::agent::173::ovirt_hosted_engine_ha.agent.agent.Agent::(_run_agent) > Error: 'Failed trying to connect storage' - trying to restart agent > MainThread::WARNING::2014-12-08 > 19:24:16,845::agent::176::ovirt_hosted_engine_ha.agent.agent.Agent::(_run_agent) > Restarting agent, attempt '8' > MainThread::INFO::2014-12-08 > 19:24:16,855::hosted_engine::222::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_get_hostname) > Found certificate common name: 172.17.10.50 > MainThread::WARNING::2014-12-08 > 19:24:16,962::hosted_engine::497::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) > Failed to connect storage, waiting '15' seconds before the next attempt > MainThread::WARNING::2014-12-08 > 19:24:32,069::hosted_engine::497::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) > Failed to connect storage, waiting '15' seconds before the next attempt > MainThread::WARNING::2014-12-08 > 19:24:47,181::hosted_engine::497::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) > Failed to connect storage, waiting '15' seconds before the next attempt > MainThread::WARNING::2014-12-08 > 19:25:02,288::hosted_engine::497::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) > Failed to connect storage, waiting '15' seconds before the next attempt > MainThread::WARNING::2014-12-08 > 19:25:17,389::hosted_engine::497::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) > Failed to connect storage, waiting '15' seconds before the next attempt > MainThread::ERROR::2014-12-08 > 19:25:32,404::hosted_engine::500::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) > Failed trying to connect storage: > MainThread::ERROR::2014-12-08 > 19:25:32,404::agent::173::ovirt_hosted_engine_ha.agent.agent.Agent::(_run_agent) > Error: 'Failed trying to connect storage' - trying to restart agent > MainThread::WARNING::2014-12-08 > 19:25:37,409::agent::176::ovirt_hosted_engine_ha.agent.agent.Agent::(_run_agent) > Restarting agent, attempt '9' > MainThread::ERROR::2014-12-08 > 19:25:37,409::agent::178::ovirt_hosted_engine_ha.agent.agent.Agent::(_run_agent) > Too many errors occurred, giving up. Please review the log and > consider filing a bug. > MainThread::INFO::2014-12-08 > 19:25:37,409::agent::118::ovirt_hosted_engine_ha.agent.agent.Agent::(run) > Agent shutting down > (END) - Next: /var/log/ovirt-hosted-engine-ha/broker.log > > vdsm.log: > > Detector thread::DEBUG::2014-12-08 > 19:20:45,458::protocoldetector::214::vds.MultiProtocolAcceptor::(_remove_connection) > Removing connection 127.0.0.1:53083 > Detector thread::DEBUG::2014-12-08 > 19:20:45,458::BindingXMLRPC::1193::XmlDetector::(handleSocket) xml > over http detected from ('127.0.0.1', 53083) > Thread-44::DEBUG::2014-12-08 > 19:20:45,459::BindingXMLRPC::318::vds::(wrapper) client [127.0.0.1] > Thread-44::DEBUG::2014-12-08 > 19:20:45,460::task::592::Storage.TaskManager.Task::(_updateState) > Task=`b5accf8f-014a-412d-9fb8-9e9447d49b72`::moving from state init -> > state preparing > Thread-44::INFO::2014-12-08 > 19:20:45,460::logUtils::48::dispatcher::(wrapper) Run and protect: > connectStorageServer(domType=1, > spUUID='ab2b5ee7-9aa7-426f-9d58-5e7d3840ad81', conList=[{'connection': > 'zebulon.ifa.net:/engine', 'iqn': ',', 'protocol_version': '3' > , 'kvm': 'password', '=': 'user', ',': '='}], options=None) > Thread-44::DEBUG::2014-12-08 > 19:20:45,461::hsm::2384::Storage.HSM::(__prefetchDomains) nfs local > path: /rhev/data-center/mnt/zebulon.ifa.net:_engine > Thread-44::DEBUG::2014-12-08 > 19:20:45,462::hsm::2408::Storage.HSM::(__prefetchDomains) Found SD > uuids: (u'd3240928-dae9-4ed0-8a28-7ab552455063',) > Thread-44::DEBUG::2014-12-08 > 19:20:45,463::hsm::2464::Storage.HSM::(connectStorageServer) knownSDs: > {d3240928-dae9-4ed0-8a28-7ab552455063: storage.nfsSD.findDomain} > Thread-44::ERROR::2014-12-08 > 19:20:45,463::task::863::Storage.TaskManager.Task::(_setError) > Task=`b5accf8f-014a-412d-9fb8-9e9447d49b72`::Unexpected error > Traceback (most recent call last): > File "/usr/share/vdsm/storage/task.py", line 870, in _run > return fn(*args, **kargs) > File "/usr/share/vdsm/logUtils.py", line 49, in wrapper > res = f(*args, **kwargs) > File "/usr/share/vdsm/storage/hsm.py", line 2466, in > connectStorageServer > res.append({'id': conDef["id"], 'status': status}) > KeyError: 'id' > Thread-44::DEBUG::2014-12-08 > 19:20:45,463::task::882::Storage.TaskManager.Task::(_run) > Task=`b5accf8f-014a-412d-9fb8-9e9447d49b72`::Task._run: > b5accf8f-014a-412d-9fb8-9e9447d49b72 (1, > 'ab2b5ee7-9aa7-426f-9d58-5e7d3840ad81', [{'kvm': 'password', ',': '=', > 'conn > ection': 'zebulon.ifa.net:/engine', 'iqn': ',', 'protocol_version': > '3', '=': 'user'}]) {} failed - stopping task > Thread-44::DEBUG::2014-12-08 > 19:20:45,463::task::1214::Storage.TaskManager.Task::(stop) > Task=`b5accf8f-014a-412d-9fb8-9e9447d49b72`::stopping in state > preparing (force False) > Thread-44::DEBUG::2014-12-08 > 19:20:45,463::task::990::Storage.TaskManager.Task::(_decref) > Task=`b5accf8f-014a-412d-9fb8-9e9447d49b72`::ref 1 aborting True > Thread-44::INFO::2014-12-08 > 19:20:45,463::task::1168::Storage.TaskManager.Task::(prepare) > Task=`b5accf8f-014a-412d-9fb8-9e9447d49b72`::aborting: Task is > aborted: u"'id'" - code 100 > Thread-44::DEBUG::2014-12-08 > 19:20:45,463::task::1173::Storage.TaskManager.Task::(prepare) > Task=`b5accf8f-014a-412d-9fb8-9e9447d49b72`::Prepare: aborted: 'id' > Thread-44::DEBUG::2014-12-08 > 19:20:45,463::task::990::Storage.TaskManager.Task::(_decref) > Task=`b5accf8f-014a-412d-9fb8-9e9447d49b72`::ref 0 aborting True > Thread-44::DEBUG::2014-12-08 > 19:20:45,463::task::925::Storage.TaskManager.Task::(_doAbort) > Task=`b5accf8f-014a-412d-9fb8-9e9447d49b72`::Task._doAbort: force False > Thread-44::DEBUG::2014-12-08 > 19:20:45,463::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll) > Owner.cancelAll requests {} > Thread-44::DEBUG::2014-12-08 > 19:20:45,463::task::592::Storage.TaskManager.Task::(_updateState) > Task=`b5accf8f-014a-412d-9fb8-9e9447d49b72`::moving from state > preparing -> state aborting > Thread-44::DEBUG::2014-12-08 > 19:20:45,464::task::547::Storage.TaskManager.Task::(__state_aborting) > Task=`b5accf8f-014a-412d-9fb8-9e9447d49b72`::_aborting: recover policy > none > Thread-44::DEBUG::2014-12-08 > 19:20:45,464::task::592::Storage.TaskManager.Task::(_updateState) > Task=`b5accf8f-014a-412d-9fb8-9e9447d49b72`::moving from state > aborting -> state failed > Thread-44::DEBUG::2014-12-08 > 19:20:45,464::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll) > Owner.releaseAll requests {} resources {} > Thread-44::DEBUG::2014-12-08 > 19:20:45,464::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll) > Owner.cancelAll requests {} > Thread-44::ERROR::2014-12-08 > 19:20:45,464::dispatcher::79::Storage.Dispatcher::(wrapper) 'id' > Traceback (most recent call last): > File "/usr/share/vdsm/storage/dispatcher.py", line 71, in wrapper > result = ctask.prepare(func, *args, **kwargs) > File "/usr/share/vdsm/storage/task.py", line 103, in wrapper > return m(self, *a, **kw) > File "/usr/share/vdsm/storage/task.py", line 1176, in prepare > raise self.error > KeyError: 'id' > clientIFinit::ERROR::2014-12-08 > 19:20:48,190::clientIF::460::vds::(_recoverExistingVms) Vm's recovery > failed > Traceback (most recent call last): > File "/usr/share/vdsm/clientIF.py", line 404, in _recoverExistingVms > caps.CpuTopology().cores()) > File "/usr/share/vdsm/caps.py", line 200, in __init__ > self._topology = _getCpuTopology(capabilities) > File "/usr/share/vdsm/caps.py", line 232, in _getCpuTopology > capabilities = _getFreshCapsXMLStr() > File "/usr/share/vdsm/caps.py", line 222, in _getFreshCapsXMLStr > return libvirtconnection.get().getCapabilities() > File "/usr/lib/python2.7/site-packages/vdsm/libvirtconnection.py", > line 157, in get > passwd) > File "/usr/lib/python2.7/site-packages/vdsm/libvirtconnection.py", > line 102, in open_connection > return utils.retry(libvirtOpen, timeout=10, sleep=0.2) > File "/usr/lib/python2.7/site-packages/vdsm/utils.py", line 935, in > retry > return func() > File "/usr/lib64/python2.7/site-packages/libvirt.py", line 102, in > openAuth > if ret is None:raise libvirtError('virConnectOpenAuth() failed') > libvirtError: authentication failed: polkit: > polkit\56retains_authorization_after_challenge=1 > Authorization requires authentication but no agent is available. > > -- This message is intended only for the addressee and may contain confidential information. Unless you are that person, you may not disclose its contents or use it in any way and are requested to delete the message along with any attachments and notify us immediately. "Transact" is operated by Integrated Financial Arrangements plc. 29 Clement's Lane, London EC4N 7AE. Tel: (020) 7608 4900 Fax: (020) 7608 5300. (Registered office: as above; Registered in England and Wales under number: 3727592). Authorised and regulated by the Financial Conduct Authority (entered on the Financial Services Register; no. 190856). ------------------------------ _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users End of Users Digest, Vol 39, Issue 98 ************************************* ------=_Part_10957803_1008904620.1418749854056 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"font-family: georgia,serif; font-size: 12pt; colo= r: #000000"><div>Hi,</div><div>Can I get engine, libvirt, vdsm, mom, logs f= rom host8 and connectivity log?</div><div>Have you tried installing clean O= Ss on hosts, especially on problematic host?</div><div>I'd also try to disa= ble JSONRPC on hosts, by putting them to maintenance and then removing JSON= RPC from the check box on all hosts, just to compare if it resolves the iss= ue.</div><div><br></div><div><br></div><div><span name=3D"x"></span><br>Tha= nks in advance.<br><div><br></div>Best regards,<br>Nikolai<br>_____________= _______<br>Nikolai Sednev<br>Senior Quality Engineer at Compute team<br>Red= Hat Israel<br>34 Jerusalem Road,<br>Ra'anana, Israel 43501<br><div><br></d= iv>Tel:       +972   9 7692043<br>Mobile: +972 52 73427= 34<br>Email: nsednev(a)redhat.com<br>IRC: nsednev<span name=3D"x"></span><br>= </div><div><br></div><hr id=3D"zwchr"><div style=3D"color:#000;font-weight:= normal;font-style:normal;text-decoration:none;font-family:Helvetica,Arial,s= ans-serif;font-size:12pt;"><b>From: </b>users-request(a)ovirt.org<br><b>To: <= /b>users(a)ovirt.org<br><b>Sent: </b>Tuesday, December 16, 2014 5:50:28 PM<br= ><b>Subject: </b>Users Digest, Vol 39, Issue 98<br><div><br></div>Send User= s mailing list submissions to<br>       =  users(a)ovirt.org<br><div><br></div>To subscribe or unsubscribe via the= World Wide Web, visit<br>        h= ttp://lists.ovirt.org/mailman/listinfo/users<br>or, via email, send a messa= ge with subject or body 'help' to<br>      &n= bsp; users-request(a)ovirt.org<br><div><br></div>You can reach the perso= n managing the list at<br>        u= sers-owner(a)ovirt.org<br><div><br></div>When replying, please edit your Subj= ect line so it is more specific<br>than "Re: Contents of Users digest..."<b= r><div><br></div><br>Today's Topics:<br><div><br></div>   1. Re: =  Free Ovirt Powered Cloud (Lior Vernia)<br>   2.   glus= ter rpms not found (Pat Pierson)<br>   3.  vdsm losing conne= ction to libvirt (Chris Adams)<br>   4. Re:  Creating new us= ers on oVirt 3.5 (Donny Davis)<br>   5. Re:  gfapi, 3.5.1 (A= lex Crow)<br><div><br></div><br>-------------------------------------------= ---------------------------<br><div><br></div>Message: 1<br>Date: Tue, 16 D= ec 2014 15:55:02 +0200<br>From: Lior Vernia <lvernia(a)redhat.com><br>T= o: Donny Davis <donny(a)cloudspin.me><br>Cc: users(a)ovirt.org<br>Subject= : Re: [ovirt-users] Free Ovirt Powered Cloud<br>Message-ID: <549039B6.20= 10804(a)redhat.com><br>Content-Type: text/plain; charset=3DISO-8859-1<br><= div><br></div>Hi Donny,<br><div><br></div>On 15/12/14 18:24, Donny Davis wr= ote:<br>> Hi guys, I'm providing a free public cloud solution entirely b= ased on<br>> vanilla oVirt called cloudspin.me <http://cloudspin.me&g= t;<br>> <br><div><br></div>This looks great! :)<br><div><br></div>> I= t runs on IPv6, and I am looking for people to use the system, host<br>>= services and report back to me with their results.<br>> <br><div><br></= div>Do you also use IPv6 internally in your deployment? e.g. assign IPv6<br= >addresses to your hosts, storage domain, power management etc.? We'd be<br= >very interested to hear what works and what doesn't. And perhaps help<br>p= ush forward what doesn't, if you need it :)<br><div><br></div>> Data I a= m looking for<br>> <br>> Connection Speed - Is it comparable to other= services<br>> <br>> User experience - Are there any changes recommen= ded<br>> <br>> Does it work for you - What does, and does not work fo= r you.<br>> <br>>  <br>> <br>> I am trying to get funding = to keep this a free resource for everyone to<br>> use. (not from here:)<= br>> <br>> I am completely open to any and all suggestions, and or he= lp with<br>> things. I am a one man show at the moment.<br>> <br>>= If anyone has any questions please email me back<br>> <br>> Donny D<= br>> <br>>  <br>> <br>> <br>> <br>> ________________= _______________________________<br>> Users mailing list<br>> Users@ov= irt.org<br>> http://lists.ovirt.org/mailman/listinfo/users<br>> <br><= div><br></div><br>------------------------------<br><div><br></div>Message:= 2<br>Date: Tue, 16 Dec 2014 09:08:57 -0500<br>From: Pat Pierson <ihasn2= 004(a)gmail.com><br>To: nathan(a)robotics.net<br>Cc: "users(a)ovirt.org" <u= sers(a)ovirt.org><br>Subject: [ovirt-users]  gluster rpms not found<b= r>Message-ID:<br>        <CAMRYi= EiKL1MEGoHWjKtnhW3DXjouU0w3hs5zFx75sfBL8M4JaQ(a)mail.gmail.com><br>Content= -Type: text/plain; charset=3D"utf-8"<br><div><br></div>Nathan,<br> &nb= sp; Did you find a work around for this?  I am running into the same i= ssue.<br><div><br></div>Is there a way to force vdsm to see gluster? Or a w= ay to manually run the<br>search so I can see why it fails?<br><div><br></d= iv><br>>*<><br>*nathan stratton | vp technology | broadsoft, inc |= +1-240-404-6580<br>|www.broadsoft.com<br><div><br></div><br>On Fri, Jun 20= , 2014 at 11:01 AM, Nathan Stratton <nathan at<br>robotics.net <http:= //lists.ovirt.org/mailman/listinfo/users>><br>wrote:<br><div><br></di= v>>* Actually I have vdsm-gluster, that is why vdsm tries to find the gl= uster<br>*>* packages. Is there a way I can run the vdsm gluster rpm sea= rch manually to<br>*>* see what is going wrong?<br>*>>* [root at v= irt01a <http://lists.ovirt.org/mailman/listinfo/users><br>~]# yum lis= t installed |grep vdsm<br>*>* vdsm.x86_64         &n= bsp;  4.14.9-0.el6     @ovirt-3.4-stable<br>*>>* vdsm-= cli.noarch        4.14.9-0.el6     @ovirt-3.4= -stable<br>*>>* vdsm-gluster.noarch    4.14.9-0.el6   =   @ovirt-3.4-stable<br>*>>* vdsm-python.x86_64     4.1= 4.9-0.el6     @ovirt-3.4-stable<br>*>>* vdsm-python-zombier= eaper.noarch<br>*>* vdsm-xmlrpc.noarch     4.14.9-0.el6  =   @ovirt-3.4-stable<br>*>>>>* ><><br>*>* nath= an stratton | vp technology | broadsoft, inc | +1-240-404-6580<br><%2B1-= 240-404-6580> |<br>*>* www.broadsoft.com <http://www.broadsoft.com= /><br>*>>>* On Thu, Jun 19, 2014 at 8:39 PM, Andrew Lau <and= rew at<br>andrewklau.com <http://lists.ovirt.org/mailman/listinfo/users&= gt;> wrote:<br>*>>>* You're missing vdsm-gluster<br>*>>&g= t;>* yum install vdsm-gluster<br>*>>>>* On Fri, Jun 20, 2014= at 6:24 AM, Nathan Stratton <nathan at<br>robotics.net <http://lists= .ovirt.org/mailman/listinfo/users>><br>*>>* wrote:<br>*>>= * > I am running ovirt 3.4 and have gluster installed:<br>*>>* &gt= ;<br>*>>* > [root at virt01a<br><http://lists.ovirt.org/mailman= /listinfo/users>]# yum list installed<br>|grep gluster<br>*>>* &gt= ; glusterfs.x86_64       3.5.0-2.el6      @ov= irt-glusterfs-epel<br>*>>* > glusterfs-api.x86_64   3.5.0-2.e= l6      @ovirt-glusterfs-epel<br>*>>* > glusterfs-c= li.x86_64   3.5.0-2.el6      @ovirt-glusterfs-epel<br>*= >>* > glusterfs-fuse.x86_64  3.5.0-2.el6      = @ovirt-glusterfs-epel<br>*>>* > glusterfs-libs.x86_64  3.5.0-= 2.el6      @ovirt-glusterfs-epel<br>*>>* > glusterf= s-rdma.x86_64  3.5.0-2.el6      @ovirt-glusterfs-epel<b= r>*>>* > glusterfs-server.x86_64  3.5.0-2.el6     &= nbsp;@ovirt-glusterfs-epel<br>*>>* ><br>*>>* > However vd= sm can't seem to find them:<br>*>>* ><br>*>>* > Thread-13= ::DEBUG::2014-06-19<br>*>>* > 16:15:57,250::caps::458::root::(_get= KeyPackages) rpm package<br>*>>* glusterfs-rdma<br>*>>* > no= t found<br>*>>* > Thread-13::DEBUG::2014-06-19<br>*>>* > = 16:15:57,250::caps::458::root::(_getKeyPackages) rpm package<br>*>>* = glusterfs-fuse<br>*>>* > not found<br>*>>* > Thread-13::D= EBUG::2014-06-19<br>*>>* > 16:15:57,251::caps::458::root::(_getKey= Packages) rpm package<br>*>>* gluster-swift<br>*>>* > not fo= und<br>*>>* > Thread-13::DEBUG::2014-06-19<br>*>>* > 16:1= 5:57,252::caps::458::root::(_getKeyPackages) rpm package<br>*>>* >= gluster-swift-object not found<br>*>>* > Thread-13::DEBUG::2014-0= 6-19<br>*>>* > 16:15:57,252::caps::458::root::(_getKeyPackages) rp= m package glusterfs<br>*>>* not<br>*>>* > found<br>*>>= * > Thread-13::DEBUG::2014-06-19<br>*>>* > 16:15:57,252::caps::= 458::root::(_getKeyPackages) rpm package<br>*>>* > gluster-swift-p= lugin not found<br>*>>* > Thread-13::DEBUG::2014-06-19<br>*>&gt= ;* > 16:15:57,254::caps::458::root::(_getKeyPackages) rpm package<br>*&g= t;>* > gluster-swift-account not found<br>*>>* > Thread-13::= DEBUG::2014-06-19<br>*>>* > 16:15:57,254::caps::458::root::(_getKe= yPackages) rpm package<br>*>>* > gluster-swift-proxy not found<br>= *>>* > Thread-13::DEBUG::2014-06-19<br>*>>* > 16:15:57,25= 4::caps::458::root::(_getKeyPackages) rpm package<br>*>>* > gluste= r-swift-doc not found<br>*>>* > Thread-13::DEBUG::2014-06-19<br>*&= gt;>* > 16:15:57,255::caps::458::root::(_getKeyPackages) rpm package<= br>*>>* > glusterfs-server not found<br>*>>* > Thread-13:= :DEBUG::2014-06-19<br>*>>* > 16:15:57,255::caps::458::root::(_getK= eyPackages) rpm package<br>*>>* > gluster-swift-container not foun= d<br>*>>* > Thread-13::DEBUG::2014-06-19<br>*>>* > 16:15:= 57,255::caps::458::root::(_getKeyPackages) rpm package<br>*>>* > g= lusterfs-geo-replication not found<br>*>>* ><br>*>>* > An= y ideas?<br>*>>* ><br>*>>* >><><br>*>>* &g= t; nathan stratton | vp technology | broadsoft, inc |<br>+1-240-404-6580 &l= t;%2B1-240-404-6580> |<br>*>>* > www.broadsoft.com <http://w= ww.broadsoft.com/><br>*>>* ><br>*>>* > _______________= ________________________________<br>*>>* > Users mailing list<br>*= >>* > Users at ovirt.org <http://lists.ovirt.org/mailman/listin= fo/users><br>*>>* > http://lists.ovirt.org/mailman/listinfo/use= rs<br><http://lists.ovirt.org/mailman/listinfo/users><br>*>>* &= gt;<br>*>>>>-------------- next part --------------<br>An HTML = attachment was scrubbed...<br>URL: <http://lists.ovirt.org/pipermail/use= rs/attachments/20140621/9b14c8fe/attachment.html><br><div><br></div><br>= -- <br>Patrick Pierson<br>-------------- next part --------------<br>An HTM= L attachment was scrubbed...<br>URL: <http://lists.ovirt.org/pipermail/u= sers/attachments/20141216/58d14872/attachment-0001.html><br><div><br></d= iv>------------------------------<br><div><br></div>Message: 3<br>Date: Tue= , 16 Dec 2014 08:48:48 -0600<br>From: Chris Adams <cma(a)cmadams.net><b= r>To: users(a)ovirt.org<br>Subject: [ovirt-users] vdsm losing connection to l= ibvirt<br>Message-ID: <20141216144848.GA1708(a)cmadams.net><br>Content-= Type: text/plain; charset=3Dus-ascii<br><div><br></div>I have a oVirt setup= that has three nodes, all running CentOS 7, with a<br>hosted engine runnin= g CentOS 6.  Two of the nodes (node8 and node9) are<br>configured for = hosted engine, and the third (node2) is just a "regular"<br>node (as you mi= ght guess from the names, more nodes are coming as I<br>migrate VMs to oVir= t).<br><div><br></div>On one node, node8, vdsm periodically loses its conne= ction to libvirt,<br>which causes vdsm to restart.  There doesn't appe= ar to be any trigger<br>that I can see (not time of day, load, etc. related= ).  The engine VM is<br>up and running on node8 (don't know if that ha= s anything to do with it).<br><div><br></div>I get some entries in /var/log= /messages repeated continuously; the<br>"ovirt-ha-broker: sending ioctl 540= 1 to a partition" I mentioned before,<br>and the following:<br><div><br></d= iv>Dec 15 20:56:23 node8 journal: User record for user '107' was not found:= No such file or directory<br>Dec 15 20:56:23 node8 journal: Group record f= or user '107' was not found: No such file or directory<br><div><br></div>I = don't think those have any relevance (don't know where they come<br>from); = filtering those out, I see:<br><div><br></div>Dec 15 20:56:33 node8 journal= : End of file while reading data: Input/output error<br>Dec 15 20:56:33 nod= e8 journal: Tried to close invalid fd 0<br>Dec 15 20:56:38 node8 journal: v= dsm root WARNING connection to libvirt broken. ecode: 1 edom: 7<br>Dec 15 2= 0:56:38 node8 journal: vdsm root CRITICAL taking calling process down.<br>D= ec 15 20:56:38 node8 journal: vdsm vds ERROR libvirt error<br>Dec 15 20:56:= 38 node8 journal: ovirt-ha-broker mgmt_bridge.MgmtBridge ERROR Failed to ge= tVdsCapabilities: Error 16 from getVdsCapabilities: Unexpected exception<br= >Dec 15 20:56:45 node8 journal: End of file while reading data: Input/outpu= t error<br>Dec 15 20:56:45 node8 vdsmd_init_common.sh: vdsm: Running run_fi= nal_hooks<br>Dec 15 20:56:45 node8 systemd: Starting Virtual Desktop Server= Manager...<br><and then all the normal-looking vdsm startup><br><div= ><br></div>It is happening about once a day, but not at any regular interva= l or<br>time (was 02:23 Sunday, then 20:56 Monday).<br><div><br></div>vdsm.= log has this at that time:<br><div><br></div>Thread-601576::DEBUG::2014-12-= 15 20:56:38,715::BindingXMLRPC::1132::vds::(wrapper) client [127.0.0.1]::ca= ll getCapabilities with () {}<br>Thread-601576::DEBUG::2014-12-15 20:56:38,= 718::utils::738::root::(execCmd) /sbin/ip route show to 0.0.0.0/0 table all= (cwd None)<br>Thread-601576::DEBUG::2014-12-15 20:56:38,746::utils::758::r= oot::(execCmd) SUCCESS: <err> =3D ''; <rc> =3D 0<br>Thread-6015= 76::WARNING::2014-12-15 20:56:38,754::libvirtconnection::135::root::(wrappe= r) connection to libvirt broken. ecode: 1 edom: 7<br>Thread-601576::CRITICA= L::2014-12-15 20:56:38,754::libvirtconnection::137::root::(wrapper) taking = calling process down.<br>MainThread::DEBUG::2014-12-15 20:56:38,754::vdsm::= 58::vds::(sigtermHandler) Received signal 15<br>Thread-601576::DEBUG::2014-= 12-15 20:56:38,755::libvirtconnection::143::root::(wrapper) Unknown libvirt= error: ecode: 1 edom: 7 level: 2 message: internal error: client socket is = closed<br>MainThread::DEBUG::2014-12-15 20:56:38,755::protocoldetector::135= ::vds.MultiProtocolAcceptor::(stop) Stopping Acceptor<br>MainThread::INFO::= 2014-12-15 20:56:38,755::__init__::563::jsonrpc.JsonRpcServer::(stop) Stopp= ing JsonRPC Server<br>Detector thread::DEBUG::2014-12-15 20:56:38,756::prot= ocoldetector::106::vds.MultiProtocolAcceptor::(_cleanup) Cleaning Acceptor<= br>MainThread::INFO::2014-12-15 20:56:38,757::vmchannels::188::vds::(stop) = VM channels listener was stopped.<br>MainThread::INFO::2014-12-15 20:56:38,= 758::momIF::91::MOM::(stop) Shutting down MOM<br>MainThread::DEBUG::2014-12= -15 20:56:38,759::task::595::Storage.TaskManager.Task::(_updateState) Task= =3D`26c7680c-23e2-42bb-964c-272e778a168a`::moving from state init -> sta= te preparing<br>MainThread::INFO::2014-12-15 20:56:38,759::logUtils::44::di= spatcher::(wrapper) Run and protect: prepareForShutdown(options=3DNone)<br>= Thread-601576::ERROR::2014-12-15 20:56:38,755::BindingXMLRPC::1142::vds::(w= rapper) libvirt error<br>Traceback (most recent call last):<br>  = File "/usr/share/vdsm/rpc/BindingXMLRPC.py", line 1135, in wrapper<br>&nbsp= ;   res =3D f(*args, **kwargs)<br>  File "/usr/share/vd= sm/rpc/BindingXMLRPC.py", line 463, in getCapabilities<br>   &nbs= p;ret =3D api.getCapabilities()<br>  File "/usr/share/vdsm/API.py= ", line 1245, in getCapabilities<br>    c =3D caps.get()<br>=   File "/usr/share/vdsm/caps.py", line 615, in get<br> &nbsp= ;  caps.update(netinfo.get())<br>  File "/usr/lib/python2.7/= site-packages/vdsm/netinfo.py", line 812, in get<br>    nets= =3D networks()<br>  File "/usr/lib/python2.7/site-packages/vdsm/= netinfo.py", line 119, in networks<br>    allNets =3D ((net,= net.name()) for net in conn.listAllNetworks(0))<br>  File "/usr/= lib/python2.7/site-packages/vdsm/libvirtconnection.py", line 129, in wrappe= r<br>    __connections.get(id(target)).pingLibvirt()<br>&nbs= p; File "/usr/lib64/python2.7/site-packages/libvirt.py", line 3642, in= getLibVersion<br>    if ret =3D=3D -1: raise libvirtError (= 'virConnectGetLibVersion() failed', conn=3Dself)<br>libvirtError: internal = error: client socket is closed<br><div><br></div><br>-- <br>Chris Adams &lt= ;cma(a)cmadams.net><br><div><br></div><br>------------------------------<b= r><div><br></div>Message: 4<br>Date: Tue, 16 Dec 2014 07:57:16 -0700<br>Fro= m: "Donny Davis" <donny(a)cloudspin.me><br>To: "'Alon Bar-Lev'" <alo= nbl(a)redhat.com>,        "'Fedele= Stabile'"<br>        <fedele.st= abile(a)fis.unical.it><br>Cc: users(a)ovirt.org<br>Subject: Re: [ovirt-users= ] Creating new users on oVirt 3.5<br>Message-ID: <008801d01940$9682f2f0$= c388d8d0$(a)cloudspin.me><br>Content-Type: text/plain;   &n= bsp;    charset=3D"us-ascii"<br><div><br></div>Check ou= t my write-up on AAA, <br>I tried my best to break it down, and make it sim= ple<br><div><br></div>https://cloudspin.me/ovirt-simple-ldap-aaa/<br><div><= br></div>-----Original Message-----<br>From: users-bounces(a)ovirt.org [mailt= o:users-bounces@ovirt.org] On Behalf Of<br>Alon Bar-Lev<br>Sent: Tuesday, D= ecember 16, 2014 1:49 AM<br>To: Fedele Stabile<br>Cc: users(a)ovirt.org<br>Su= bject: Re: [ovirt-users] Creating new users on oVirt 3.5<br><div><br></div>= <br><div><br></div>----- Original Message -----<br>> From: "Fedele Stabi= le" <fedele.stabile(a)fis.unical.it><br>> To: users(a)ovirt.org<br>&gt= ; Sent: Monday, December 15, 2014 8:05:28 PM<br>> Subject: [ovirt-users]= Creating new users on oVirt 3.5<br>> <br>> Hello,<br>> I have to = create some users on my oVirt 3.5 infrastructure.<br>> On FridayI  = was following istructions on <br>> http://www.ovirt.org/LDAP_Quick_Start= <br>> LDAP Quick Start<br>> so I correctly created a OpenLDAP server = and a Kerberos service, but <br>> this morning I read that the instructi= ons are obsolete...<br>> Now I'm trying to understand how to implement t= he new mechanism... but <br>> I'm in troubles:<br>> 1) run yum instal= l ovirt-engine-extension-aaa-ldap<br>> 2) copied files in /etc/ovirt-eng= ine/extensions.d and modified the <br>> name in fis.unical.it-auth(n/z).= properties<br>> 3) copied files in /etc/ovirt-engine/aaa but now I can't= do anything<br>> <br>> Can you help me with newbye instructions to i= nstall the aaa-extensions?<br>> Thank you very much<br>> Fedele Stabi= le<br><div><br></div>Hello,<br><div><br></div>Have you read[1]?<br>We of co= urse need help in improving documentation :) Can you please send<br>engine.= log when starting up engine so I can see if there are any issues?<br>Please= make sure that at /etc/ovirt-engine/extensions.d you set the<br>config.pro= file.file.1 to absolute file, /etc/ovirt-enigne/aaa/ as we wait<br>for 3.5.= 1 to support relative names.<br><div><br></div>The simplest sequence is:<br= ><div><br></div>1. copy recursive /usr/share/ovirt-engine-extension-aaa-lda= p/examples/simple<br>to /etc/ovirt-engine 2. edit /etc/ovirt-engine/extensi= on.d/* replace ../aaa<br>to /etc/ovirt-engine/aaa this is pending 3.5.1.<br= >3. edit /etc/ovirt-engine/aaa/ldap1.properties and set vars.server,<br>var= s.user, vars.password to meet your setup.<br>4. restart engine.<br>5. send = me engine.log<br><div><br></div>Regards,<br>Alon<br><div><br></div>[1]<br>h= ttp://gerrit.ovirt.org/gitweb?p=3Dovirt-engine-extension-aaa-ldap.git;a=3Db= lob;<br>f=3DREADME;hb=3DHEAD<br>___________________________________________= ____<br>Users mailing list<br>Users(a)ovirt.org<br>http://lists.ovirt.org/mai= lman/listinfo/users<br><div><br></div><br><div><br></div>------------------= ------------<br><div><br></div>Message: 5<br>Date: Tue, 16 Dec 2014 15:50:2= 3 +0000<br>From: Alex Crow <acrow(a)integrafin.co.uk><br>To: users@ovir= t.org<br>Subject: Re: [ovirt-users] gfapi, 3.5.1<br>Message-ID: <549054B= F.2090105(a)integrafin.co.uk><br>Content-Type: text/plain; charset=3Dutf-8= ; format=3Dflowed<br><div><br></div>Hi,<br><div><br></div>Anyone know if th= is is due to work correctly in the next iteration of 3.5?<br><div><br></div= >Thanks<br><div><br></div>Alex<br><div><br></div>On 09/12/14 10:33, Alex Cr= ow wrote:<br>> Hi,<br>><br>> Will the vdsm patches to properly ena= ble libgfapi storage for VMs (and <br>> matching refactored code in the = hosted-engine setup scripts) for VMs <br>> make it into 3.5.1? It's not = in the snapshots yet it seems.<br>><br>> I notice it's in master/3.6 = snapshot but something stops the HA stuff <br>> in self-hosted setups fr= om connecting storage:<br>><br>> from Master test setup:<br>> /var= /log/ovirt-hosted-engine-ha/broker.log<br>><br>> MainThread::INFO::20= 14-12-08 <br>> 19:22:56,287::hosted_engine::222::ovirt_hosted_engine_ha.= agent.hosted_engine.HostedEngine::(_get_hostname) <br>> Found certificat= e common name: 172.17.10.50<br>> MainThread::WARNING::2014-12-08 <br>&gt= ; 19:22:56,395::hosted_engine::497::ovirt_hosted_engine_ha.agent.hosted_eng= ine.HostedEngine::(_initialize_vdsm) <br>> Failed to connect storage, wa= iting '15' seconds before the next attempt<br>> MainThread::WARNING::201= 4-12-08 <br>> 19:23:11,501::hosted_engine::497::ovirt_hosted_engine_ha.a= gent.hosted_engine.HostedEngine::(_initialize_vdsm) <br>> Failed to conn= ect storage, waiting '15' seconds before the next attempt<br>> MainThrea= d::WARNING::2014-12-08 <br>> 19:23:26,610::hosted_engine::497::ovirt_hos= ted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) <br>>= Failed to connect storage, waiting '15' seconds before the next attempt<br= >> MainThread::WARNING::2014-12-08 <br>> 19:23:41,717::hosted_engine:= :497::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize= _vdsm) <br>> Failed to connect storage, waiting '15' seconds before the = next attempt<br>> MainThread::WARNING::2014-12-08 <br>> 19:23:56,824:= :hosted_engine::497::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngin= e::(_initialize_vdsm) <br>> Failed to connect storage, waiting '15' seco= nds before the next attempt<br>> MainThread::ERROR::2014-12-08 <br>> = 19:24:11,840::hosted_engine::500::ovirt_hosted_engine_ha.agent.hosted_engin= e.HostedEngine::(_initialize_vdsm) <br>> Failed trying to connect storag= e:<br>> MainThread::ERROR::2014-12-08 <br>> 19:24:11,840::agent::173:= :ovirt_hosted_engine_ha.agent.agent.Agent::(_run_agent) <br>> Error: 'Fa= iled trying to connect storage' - trying to restart agent<br>> MainThrea= d::WARNING::2014-12-08 <br>> 19:24:16,845::agent::176::ovirt_hosted_engi= ne_ha.agent.agent.Agent::(_run_agent) <br>> Restarting agent, attempt '8= '<br>> MainThread::INFO::2014-12-08 <br>> 19:24:16,855::hosted_engine= ::222::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_get_hostn= ame) <br>> Found certificate common name: 172.17.10.50<br>> MainThrea= d::WARNING::2014-12-08 <br>> 19:24:16,962::hosted_engine::497::ovirt_hos= ted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) <br>>= Failed to connect storage, waiting '15' seconds before the next attempt<br= >> MainThread::WARNING::2014-12-08 <br>> 19:24:32,069::hosted_engine:= :497::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize= _vdsm) <br>> Failed to connect storage, waiting '15' seconds before the = next attempt<br>> MainThread::WARNING::2014-12-08 <br>> 19:24:47,181:= :hosted_engine::497::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngin= e::(_initialize_vdsm) <br>> Failed to connect storage, waiting '15' seco= nds before the next attempt<br>> MainThread::WARNING::2014-12-08 <br>&gt= ; 19:25:02,288::hosted_engine::497::ovirt_hosted_engine_ha.agent.hosted_eng= ine.HostedEngine::(_initialize_vdsm) <br>> Failed to connect storage, wa= iting '15' seconds before the next attempt<br>> MainThread::WARNING::201= 4-12-08 <br>> 19:25:17,389::hosted_engine::497::ovirt_hosted_engine_ha.a= gent.hosted_engine.HostedEngine::(_initialize_vdsm) <br>> Failed to conn= ect storage, waiting '15' seconds before the next attempt<br>> MainThrea= d::ERROR::2014-12-08 <br>> 19:25:32,404::hosted_engine::500::ovirt_hoste= d_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) <br>> F= ailed trying to connect storage:<br>> MainThread::ERROR::2014-12-08 <br>= > 19:25:32,404::agent::173::ovirt_hosted_engine_ha.agent.agent.Agent::(_= run_agent) <br>> Error: 'Failed trying to connect storage' - trying to r= estart agent<br>> MainThread::WARNING::2014-12-08 <br>> 19:25:37,409:= :agent::176::ovirt_hosted_engine_ha.agent.agent.Agent::(_run_agent) <br>&gt= ; Restarting agent, attempt '9'<br>> MainThread::ERROR::2014-12-08 <br>&= gt; 19:25:37,409::agent::178::ovirt_hosted_engine_ha.agent.agent.Agent::(_r= un_agent) <br>> Too many errors occurred, giving up. Please review the l= og and <br>> consider filing a bug.<br>> MainThread::INFO::2014-12-08= <br>> 19:25:37,409::agent::118::ovirt_hosted_engine_ha.agent.agent.Agen= t::(run) <br>> Agent shutting down<br>> (END) - Next: /var/log/ovirt-= hosted-engine-ha/broker.log<br>><br>> vdsm.log:<br>><br>> Detec= tor thread::DEBUG::2014-12-08 <br>> 19:20:45,458::protocoldetector::214:= :vds.MultiProtocolAcceptor::(_remove_connection) <br>> Removing connecti= on 127.0.0.1:53083<br>> Detector thread::DEBUG::2014-12-08 <br>> 19:2= 0:45,458::BindingXMLRPC::1193::XmlDetector::(handleSocket) xml <br>> ove= r http detected from ('127.0.0.1', 53083)<br>> Thread-44::DEBUG::2014-12= -08 <br>> 19:20:45,459::BindingXMLRPC::318::vds::(wrapper) client [127.0= .0.1]<br>> Thread-44::DEBUG::2014-12-08 <br>> 19:20:45,460::task::592= ::Storage.TaskManager.Task::(_updateState) <br>> Task=3D`b5accf8f-014a-4= 12d-9fb8-9e9447d49b72`::moving from state init -> <br>> state prepari= ng<br>> Thread-44::INFO::2014-12-08 <br>> 19:20:45,460::logUtils::48:= :dispatcher::(wrapper) Run and protect: <br>> connectStorageServer(domTy= pe=3D1, <br>> spUUID=3D'ab2b5ee7-9aa7-426f-9d58-5e7d3840ad81', conList= =3D[{'connection': <br>> 'zebulon.ifa.net:/engine', 'iqn': ',', 'protoco= l_version': '3'<br>> , 'kvm': 'password', '=3D': 'user', ',': '=3D'}], o= ptions=3DNone)<br>> Thread-44::DEBUG::2014-12-08 <br>> 19:20:45,461::= hsm::2384::Storage.HSM::(__prefetchDomains) nfs local <br>> path: /rhev/= data-center/mnt/zebulon.ifa.net:_engine<br>> Thread-44::DEBUG::2014-12-0= 8 <br>> 19:20:45,462::hsm::2408::Storage.HSM::(__prefetchDomains) Found = SD <br>> uuids: (u'd3240928-dae9-4ed0-8a28-7ab552455063',)<br>> Threa= d-44::DEBUG::2014-12-08 <br>> 19:20:45,463::hsm::2464::Storage.HSM::(con= nectStorageServer) knownSDs: <br>> {d3240928-dae9-4ed0-8a28-7ab552455063= : storage.nfsSD.findDomain}<br>> Thread-44::ERROR::2014-12-08 <br>> 1= 9:20:45,463::task::863::Storage.TaskManager.Task::(_setError) <br>> Task= =3D`b5accf8f-014a-412d-9fb8-9e9447d49b72`::Unexpected error<br>> Traceba= ck (most recent call last):<br>>   File "/usr/share/vdsm/storage/ta= sk.py", line 870, in _run<br>>     return fn(*args, **kargs)<b= r>>   File "/usr/share/vdsm/logUtils.py", line 49, in wrapper<br>&g= t;     res =3D f(*args, **kwargs)<br>>   File "/usr/share= /vdsm/storage/hsm.py", line 2466, in <br>> connectStorageServer<br>> =     res.append({'id': conDef["id"], 'status': status})<br>> Ke= yError: 'id'<br>> Thread-44::DEBUG::2014-12-08 <br>> 19:20:45,463::ta= sk::882::Storage.TaskManager.Task::(_run) <br>> Task=3D`b5accf8f-014a-41= 2d-9fb8-9e9447d49b72`::Task._run: <br>> b5accf8f-014a-412d-9fb8-9e9447d4= 9b72 (1, <br>> 'ab2b5ee7-9aa7-426f-9d58-5e7d3840ad81', [{'kvm': 'passwor= d', ',': '=3D', <br>> 'conn<br>> ection': 'zebulon.ifa.net:/engine', = 'iqn': ',', 'protocol_version': <br>> '3', '=3D': 'user'}]) {} failed - = stopping task<br>> Thread-44::DEBUG::2014-12-08 <br>> 19:20:45,463::t= ask::1214::Storage.TaskManager.Task::(stop) <br>> Task=3D`b5accf8f-014a-= 412d-9fb8-9e9447d49b72`::stopping in state <br>> preparing (force False)= <br>> Thread-44::DEBUG::2014-12-08 <br>> 19:20:45,463::task::990::Sto= rage.TaskManager.Task::(_decref) <br>> Task=3D`b5accf8f-014a-412d-9fb8-9= e9447d49b72`::ref 1 aborting True<br>> Thread-44::INFO::2014-12-08 <br>&= gt; 19:20:45,463::task::1168::Storage.TaskManager.Task::(prepare) <br>> = Task=3D`b5accf8f-014a-412d-9fb8-9e9447d49b72`::aborting: Task is <br>> a= borted: u"'id'" - code 100<br>> Thread-44::DEBUG::2014-12-08 <br>> 19= :20:45,463::task::1173::Storage.TaskManager.Task::(prepare) <br>> Task= =3D`b5accf8f-014a-412d-9fb8-9e9447d49b72`::Prepare: aborted: 'id'<br>> T= hread-44::DEBUG::2014-12-08 <br>> 19:20:45,463::task::990::Storage.TaskM= anager.Task::(_decref) <br>> Task=3D`b5accf8f-014a-412d-9fb8-9e9447d49b7= 2`::ref 0 aborting True<br>> Thread-44::DEBUG::2014-12-08 <br>> 19:20= :45,463::task::925::Storage.TaskManager.Task::(_doAbort) <br>> Task=3D`b= 5accf8f-014a-412d-9fb8-9e9447d49b72`::Task._doAbort: force False<br>> Th= read-44::DEBUG::2014-12-08 <br>> 19:20:45,463::resourceManager::977::Sto= rage.ResourceManager.Owner::(cancelAll) <br>> Owner.cancelAll requests {= }<br>> Thread-44::DEBUG::2014-12-08 <br>> 19:20:45,463::task::592::St= orage.TaskManager.Task::(_updateState) <br>> Task=3D`b5accf8f-014a-412d-= 9fb8-9e9447d49b72`::moving from state <br>> preparing -> state aborti= ng<br>> Thread-44::DEBUG::2014-12-08 <br>> 19:20:45,464::task::547::S= torage.TaskManager.Task::(__state_aborting) <br>> Task=3D`b5accf8f-014a-= 412d-9fb8-9e9447d49b72`::_aborting: recover policy <br>> none<br>> Th= read-44::DEBUG::2014-12-08 <br>> 19:20:45,464::task::592::Storage.TaskMa= nager.Task::(_updateState) <br>> Task=3D`b5accf8f-014a-412d-9fb8-9e9447d= 49b72`::moving from state <br>> aborting -> state failed<br>> Thre= ad-44::DEBUG::2014-12-08 <br>> 19:20:45,464::resourceManager::940::Stora= ge.ResourceManager.Owner::(releaseAll) <br>> Owner.releaseAll requests {= } resources {}<br>> Thread-44::DEBUG::2014-12-08 <br>> 19:20:45,464::= resourceManager::977::Storage.ResourceManager.Owner::(cancelAll) <br>> O= wner.cancelAll requests {}<br>> Thread-44::ERROR::2014-12-08 <br>> 19= :20:45,464::dispatcher::79::Storage.Dispatcher::(wrapper) 'id'<br>> Trac= eback (most recent call last):<br>>   File "/usr/share/vdsm/storage= /dispatcher.py", line 71, in wrapper<br>>     result =3D ctask= .prepare(func, *args, **kwargs)<br>>   File "/usr/share/vdsm/storag= e/task.py", line 103, in wrapper<br>>     return m(self, *a, *= *kw)<br>>   File "/usr/share/vdsm/storage/task.py", line 1176, in p= repare<br>>     raise self.error<br>> KeyError: 'id'<br>&gt= ; clientIFinit::ERROR::2014-12-08 <br>> 19:20:48,190::clientIF::460::vds= ::(_recoverExistingVms) Vm's recovery <br>> failed<br>> Traceback (mo= st recent call last):<br>>   File "/usr/share/vdsm/clientIF.py", li= ne 404, in _recoverExistingVms<br>>     caps.CpuTopology().cor= es())<br>>   File "/usr/share/vdsm/caps.py", line 200, in __init__<= br>>     self._topology =3D _getCpuTopology(capabilities)<br>&= gt;   File "/usr/share/vdsm/caps.py", line 232, in _getCpuTopology<br>= >     capabilities =3D _getFreshCapsXMLStr()<br>>   Fi= le "/usr/share/vdsm/caps.py", line 222, in _getFreshCapsXMLStr<br>> &nbs= p;   return libvirtconnection.get().getCapabilities()<br>>   F= ile "/usr/lib/python2.7/site-packages/vdsm/libvirtconnection.py", <br>> = line 157, in get<br>>     passwd)<br>>   File "/usr/li= b/python2.7/site-packages/vdsm/libvirtconnection.py", <br>> line 102, in= open_connection<br>>     return utils.retry(libvirtOpen, time= out=3D10, sleep=3D0.2)<br>>   File "/usr/lib/python2.7/site-package= s/vdsm/utils.py", line 935, in <br>> retry<br>>     return = func()<br>>   File "/usr/lib64/python2.7/site-packages/libvirt.py",= line 102, in <br>> openAuth<br>>     if ret is None:raise = libvirtError('virConnectOpenAuth() failed')<br>> libvirtError: authentic= ation failed: polkit: <br>> polkit\56retains_authorization_after_challen= ge=3D1<br>> Authorization requires authentication but no agent is availa= ble.<br>><br>><br><div><br></div>-- <br>This message is intended only= for the addressee and may contain<br>confidential information. Unless you = are that person, you may not<br>disclose its contents or use it in any way = and are requested to delete<br>the message along with any attachments and n= otify us immediately.<br>"Transact" is operated by Integrated Financial Arr= angements plc. 29<br>Clement's Lane, London EC4N 7AE. Tel: (020) 7608 4900 = Fax: (020) 7608<br>5300. (Registered office: as above; Registered in Englan= d and Wales<br>under number: 3727592). Authorised and regulated by the Fina= ncial<br>Conduct Authority (entered on the Financial Services Register; no.= 190856).<br><div><br></div><br><div><br></div>----------------------------= --<br><div><br></div>_______________________________________________<br>Use= rs mailing list<br>Users(a)ovirt.org<br>http://lists.ovirt.org/mailman/listin= fo/users<br><div><br></div><br>End of Users Digest, Vol 39, Issue 98<br>***= **********************************<br></div><div><br></div></div></body></h= tml> ------=_Part_10957803_1008904620.1418749854056--

2 1

Creating new users on oVirt 3.5
by Fedele Stabile 16 Dec '14

16 Dec '14

Hello, I have to create some users on my oVirt 3.5 infrastructure. On FridayI was following istructions on http://www.ovirt.org/LDAP_Quick_Start LDAP Quick Start so I correctly created a OpenLDAP server and a Kerberos service, but this morning I read that the instructions are obsolete... Now I'm trying to understand how to implement the new mechanism... but I'm in troubles: 1) run yum install ovirt-engine-extension-aaa-ldap 2) copied files in /etc/ovirt-engine/extensions.d and modified the name in fis.unical.it-auth(n/z).properties 3) copied files in /etc/ovirt-engine/aaa but now I can't do anything Can you help me with newbye instructions to install the aaa-extensions? Thank you very much Fedele Stabile

4 6

How to update zanata's source text ?
by plysan 16 Dec '14

16 Dec '14

Hi, When I'm trying to compile ovirt-engine-3.5 branch with pulled zanata source files, I get webadmin compilation errors. And the error message lead me to the outdated zanata translation file: org.ovirt.engine.ui.webadmin.ApplicationMessages The file has a source text called "{0} (VLAN {1})", but recent commit b068ec755198c27e65f936809104ba5068cd8fd2 has changed the text to "(VLAN {0})" So is there a way to update the zanata's source text (text on the left) ? It seems that I don't get any options to update it, I can only update the target text (text on the right). thanks.

3 6

gfapi, 3.5.1
by Alex Crow 16 Dec '14

16 Dec '14

Hi, Will the vdsm patches to properly enable libgfapi storage for VMs (and matching refactored code in the hosted-engine setup scripts) for VMs make it into 3.5.1? It's not in the snapshots yet it seems. I notice it's in master/3.6 snapshot but something stops the HA stuff in self-hosted setups from connecting storage: from Master test setup: /var/log/ovirt-hosted-engine-ha/broker.log MainThread::INFO::2014-12-08 19:22:56,287::hosted_engine::222::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_get_hostname) Found certificate common name: 172.17.10.50 MainThread::WARNING::2014-12-08 19:22:56,395::hosted_engine::497::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) Failed to connect storage, waiting '15' seconds before the next attempt MainThread::WARNING::2014-12-08 19:23:11,501::hosted_engine::497::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) Failed to connect storage, waiting '15' seconds before the next attempt MainThread::WARNING::2014-12-08 19:23:26,610::hosted_engine::497::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) Failed to connect storage, waiting '15' seconds before the next attempt MainThread::WARNING::2014-12-08 19:23:41,717::hosted_engine::497::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) Failed to connect storage, waiting '15' seconds before the next attempt MainThread::WARNING::2014-12-08 19:23:56,824::hosted_engine::497::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) Failed to connect storage, waiting '15' seconds before the next attempt MainThread::ERROR::2014-12-08 19:24:11,840::hosted_engine::500::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) Failed trying to connect storage: MainThread::ERROR::2014-12-08 19:24:11,840::agent::173::ovirt_hosted_engine_ha.agent.agent.Agent::(_run_agent) Error: 'Failed trying to connect storage' - trying to restart agent MainThread::WARNING::2014-12-08 19:24:16,845::agent::176::ovirt_hosted_engine_ha.agent.agent.Agent::(_run_agent) Restarting agent, attempt '8' MainThread::INFO::2014-12-08 19:24:16,855::hosted_engine::222::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_get_hostname) Found certificate common name: 172.17.10.50 MainThread::WARNING::2014-12-08 19:24:16,962::hosted_engine::497::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) Failed to connect storage, waiting '15' seconds before the next attempt MainThread::WARNING::2014-12-08 19:24:32,069::hosted_engine::497::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) Failed to connect storage, waiting '15' seconds before the next attempt MainThread::WARNING::2014-12-08 19:24:47,181::hosted_engine::497::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) Failed to connect storage, waiting '15' seconds before the next attempt MainThread::WARNING::2014-12-08 19:25:02,288::hosted_engine::497::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) Failed to connect storage, waiting '15' seconds before the next attempt MainThread::WARNING::2014-12-08 19:25:17,389::hosted_engine::497::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) Failed to connect storage, waiting '15' seconds before the next attempt MainThread::ERROR::2014-12-08 19:25:32,404::hosted_engine::500::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) Failed trying to connect storage: MainThread::ERROR::2014-12-08 19:25:32,404::agent::173::ovirt_hosted_engine_ha.agent.agent.Agent::(_run_agent) Error: 'Failed trying to connect storage' - trying to restart agent MainThread::WARNING::2014-12-08 19:25:37,409::agent::176::ovirt_hosted_engine_ha.agent.agent.Agent::(_run_agent) Restarting agent, attempt '9' MainThread::ERROR::2014-12-08 19:25:37,409::agent::178::ovirt_hosted_engine_ha.agent.agent.Agent::(_run_agent) Too many errors occurred, giving up. Please review the log and consider filing a bug. MainThread::INFO::2014-12-08 19:25:37,409::agent::118::ovirt_hosted_engine_ha.agent.agent.Agent::(run) Agent shutting down (END) - Next: /var/log/ovirt-hosted-engine-ha/broker.log vdsm.log: Detector thread::DEBUG::2014-12-08 19:20:45,458::protocoldetector::214::vds.MultiProtocolAcceptor::(_remove_connection) Removing connection 127.0.0.1:53083 Detector thread::DEBUG::2014-12-08 19:20:45,458::BindingXMLRPC::1193::XmlDetector::(handleSocket) xml over http detected from ('127.0.0.1', 53083) Thread-44::DEBUG::2014-12-08 19:20:45,459::BindingXMLRPC::318::vds::(wrapper) client [127.0.0.1] Thread-44::DEBUG::2014-12-08 19:20:45,460::task::592::Storage.TaskManager.Task::(_updateState) Task=`b5accf8f-014a-412d-9fb8-9e9447d49b72`::moving from state init -> state preparing Thread-44::INFO::2014-12-08 19:20:45,460::logUtils::48::dispatcher::(wrapper) Run and protect: connectStorageServer(domType=1, spUUID='ab2b5ee7-9aa7-426f-9d58-5e7d3840ad81', conList=[{'connection': 'zebulon.ifa.net:/engine', 'iqn': ',', 'protocol_version': '3' , 'kvm': 'password', '=': 'user', ',': '='}], options=None) Thread-44::DEBUG::2014-12-08 19:20:45,461::hsm::2384::Storage.HSM::(__prefetchDomains) nfs local path: /rhev/data-center/mnt/zebulon.ifa.net:_engine Thread-44::DEBUG::2014-12-08 19:20:45,462::hsm::2408::Storage.HSM::(__prefetchDomains) Found SD uuids: (u'd3240928-dae9-4ed0-8a28-7ab552455063',) Thread-44::DEBUG::2014-12-08 19:20:45,463::hsm::2464::Storage.HSM::(connectStorageServer) knownSDs: {d3240928-dae9-4ed0-8a28-7ab552455063: storage.nfsSD.findDomain} Thread-44::ERROR::2014-12-08 19:20:45,463::task::863::Storage.TaskManager.Task::(_setError) Task=`b5accf8f-014a-412d-9fb8-9e9447d49b72`::Unexpected error Traceback (most recent call last): File "/usr/share/vdsm/storage/task.py", line 870, in _run return fn(*args, **kargs) File "/usr/share/vdsm/logUtils.py", line 49, in wrapper res = f(*args, **kwargs) File "/usr/share/vdsm/storage/hsm.py", line 2466, in connectStorageServer res.append({'id': conDef["id"], 'status': status}) KeyError: 'id' Thread-44::DEBUG::2014-12-08 19:20:45,463::task::882::Storage.TaskManager.Task::(_run) Task=`b5accf8f-014a-412d-9fb8-9e9447d49b72`::Task._run: b5accf8f-014a-412d-9fb8-9e9447d49b72 (1, 'ab2b5ee7-9aa7-426f-9d58-5e7d3840ad81', [{'kvm': 'password', ',': '=', 'conn ection': 'zebulon.ifa.net:/engine', 'iqn': ',', 'protocol_version': '3', '=': 'user'}]) {} failed - stopping task Thread-44::DEBUG::2014-12-08 19:20:45,463::task::1214::Storage.TaskManager.Task::(stop) Task=`b5accf8f-014a-412d-9fb8-9e9447d49b72`::stopping in state preparing (force False) Thread-44::DEBUG::2014-12-08 19:20:45,463::task::990::Storage.TaskManager.Task::(_decref) Task=`b5accf8f-014a-412d-9fb8-9e9447d49b72`::ref 1 aborting True Thread-44::INFO::2014-12-08 19:20:45,463::task::1168::Storage.TaskManager.Task::(prepare) Task=`b5accf8f-014a-412d-9fb8-9e9447d49b72`::aborting: Task is aborted: u"'id'" - code 100 Thread-44::DEBUG::2014-12-08 19:20:45,463::task::1173::Storage.TaskManager.Task::(prepare) Task=`b5accf8f-014a-412d-9fb8-9e9447d49b72`::Prepare: aborted: 'id' Thread-44::DEBUG::2014-12-08 19:20:45,463::task::990::Storage.TaskManager.Task::(_decref) Task=`b5accf8f-014a-412d-9fb8-9e9447d49b72`::ref 0 aborting True Thread-44::DEBUG::2014-12-08 19:20:45,463::task::925::Storage.TaskManager.Task::(_doAbort) Task=`b5accf8f-014a-412d-9fb8-9e9447d49b72`::Task._doAbort: force False Thread-44::DEBUG::2014-12-08 19:20:45,463::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll) Owner.cancelAll requests {} Thread-44::DEBUG::2014-12-08 19:20:45,463::task::592::Storage.TaskManager.Task::(_updateState) Task=`b5accf8f-014a-412d-9fb8-9e9447d49b72`::moving from state preparing -> state aborting Thread-44::DEBUG::2014-12-08 19:20:45,464::task::547::Storage.TaskManager.Task::(__state_aborting) Task=`b5accf8f-014a-412d-9fb8-9e9447d49b72`::_aborting: recover policy none Thread-44::DEBUG::2014-12-08 19:20:45,464::task::592::Storage.TaskManager.Task::(_updateState) Task=`b5accf8f-014a-412d-9fb8-9e9447d49b72`::moving from state aborting -> state failed Thread-44::DEBUG::2014-12-08 19:20:45,464::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll) Owner.releaseAll requests {} resources {} Thread-44::DEBUG::2014-12-08 19:20:45,464::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll) Owner.cancelAll requests {} Thread-44::ERROR::2014-12-08 19:20:45,464::dispatcher::79::Storage.Dispatcher::(wrapper) 'id' Traceback (most recent call last): File "/usr/share/vdsm/storage/dispatcher.py", line 71, in wrapper result = ctask.prepare(func, *args, **kwargs) File "/usr/share/vdsm/storage/task.py", line 103, in wrapper return m(self, *a, **kw) File "/usr/share/vdsm/storage/task.py", line 1176, in prepare raise self.error KeyError: 'id' clientIFinit::ERROR::2014-12-08 19:20:48,190::clientIF::460::vds::(_recoverExistingVms) Vm's recovery failed Traceback (most recent call last): File "/usr/share/vdsm/clientIF.py", line 404, in _recoverExistingVms caps.CpuTopology().cores()) File "/usr/share/vdsm/caps.py", line 200, in __init__ self._topology = _getCpuTopology(capabilities) File "/usr/share/vdsm/caps.py", line 232, in _getCpuTopology capabilities = _getFreshCapsXMLStr() File "/usr/share/vdsm/caps.py", line 222, in _getFreshCapsXMLStr return libvirtconnection.get().getCapabilities() File "/usr/lib/python2.7/site-packages/vdsm/libvirtconnection.py", line 157, in get passwd) File "/usr/lib/python2.7/site-packages/vdsm/libvirtconnection.py", line 102, in open_connection return utils.retry(libvirtOpen, timeout=10, sleep=0.2) File "/usr/lib/python2.7/site-packages/vdsm/utils.py", line 935, in retry return func() File "/usr/lib64/python2.7/site-packages/libvirt.py", line 102, in openAuth if ret is None:raise libvirtError('virConnectOpenAuth() failed') libvirtError: authentication failed: polkit: polkit\56retains_authorization_after_challenge=1 Authorization requires authentication but no agent is available. -- This message is intended only for the addressee and may contain confidential information. Unless you are that person, you may not disclose its contents or use it in any way and are requested to delete the message along with any attachments and notify us immediately. "Transact" is operated by Integrated Financial Arrangements plc. 29 Clement's Lane, London EC4N 7AE. Tel: (020) 7608 4900 Fax: (020) 7608 5300. (Registered office: as above; Registered in England and Wales under number: 3727592). Authorised and regulated by the Financial Conduct Authority (entered on the Financial Services Register; no. 190856).

2 2

gluster rpms not found
by Pat Pierson 16 Dec '14

16 Dec '14

Nathan, Did you find a work around for this? I am running into the same issue. Is there a way to force vdsm to see gluster? Or a way to manually run the search so I can see why it fails? >*<> *nathan stratton | vp technology | broadsoft, inc | +1-240-404-6580 |www.broadsoft.com On Fri, Jun 20, 2014 at 11:01 AM, Nathan Stratton <nathan at robotics.net <http://lists.ovirt.org/mailman/listinfo/users>> wrote: >* Actually I have vdsm-gluster, that is why vdsm tries to find the gluster *>* packages. Is there a way I can run the vdsm gluster rpm search manually to *>* see what is going wrong? *>>* [root at virt01a <http://lists.ovirt.org/mailman/listinfo/users> ~]# yum list installed |grep vdsm *>* vdsm.x86_64 4.14.9-0.el6 @ovirt-3.4-stable *>>* vdsm-cli.noarch 4.14.9-0.el6 @ovirt-3.4-stable *>>* vdsm-gluster.noarch 4.14.9-0.el6 @ovirt-3.4-stable *>>* vdsm-python.x86_64 4.14.9-0.el6 @ovirt-3.4-stable *>>* vdsm-python-zombiereaper.noarch *>* vdsm-xmlrpc.noarch 4.14.9-0.el6 @ovirt-3.4-stable *>>>>* ><> *>* nathan stratton | vp technology | broadsoft, inc | +1-240-404-6580 <%2B1-240-404-6580> | *>* www.broadsoft.com <http://www.broadsoft.com/> *>>>* On Thu, Jun 19, 2014 at 8:39 PM, Andrew Lau <andrew at andrewklau.com <http://lists.ovirt.org/mailman/listinfo/users>> wrote: *>>>* You're missing vdsm-gluster *>>>>* yum install vdsm-gluster *>>>>* On Fri, Jun 20, 2014 at 6:24 AM, Nathan Stratton <nathan at robotics.net <http://lists.ovirt.org/mailman/listinfo/users>> *>>* wrote: *>>* > I am running ovirt 3.4 and have gluster installed: *>>* > *>>* > [root at virt01a <http://lists.ovirt.org/mailman/listinfo/users>]# yum list installed |grep gluster *>>* > glusterfs.x86_64 3.5.0-2.el6 @ovirt-glusterfs-epel *>>* > glusterfs-api.x86_64 3.5.0-2.el6 @ovirt-glusterfs-epel *>>* > glusterfs-cli.x86_64 3.5.0-2.el6 @ovirt-glusterfs-epel *>>* > glusterfs-fuse.x86_64 3.5.0-2.el6 @ovirt-glusterfs-epel *>>* > glusterfs-libs.x86_64 3.5.0-2.el6 @ovirt-glusterfs-epel *>>* > glusterfs-rdma.x86_64 3.5.0-2.el6 @ovirt-glusterfs-epel *>>* > glusterfs-server.x86_64 3.5.0-2.el6 @ovirt-glusterfs-epel *>>* > *>>* > However vdsm can't seem to find them: *>>* > *>>* > Thread-13::DEBUG::2014-06-19 *>>* > 16:15:57,250::caps::458::root::(_getKeyPackages) rpm package *>>* glusterfs-rdma *>>* > not found *>>* > Thread-13::DEBUG::2014-06-19 *>>* > 16:15:57,250::caps::458::root::(_getKeyPackages) rpm package *>>* glusterfs-fuse *>>* > not found *>>* > Thread-13::DEBUG::2014-06-19 *>>* > 16:15:57,251::caps::458::root::(_getKeyPackages) rpm package *>>* gluster-swift *>>* > not found *>>* > Thread-13::DEBUG::2014-06-19 *>>* > 16:15:57,252::caps::458::root::(_getKeyPackages) rpm package *>>* > gluster-swift-object not found *>>* > Thread-13::DEBUG::2014-06-19 *>>* > 16:15:57,252::caps::458::root::(_getKeyPackages) rpm package glusterfs *>>* not *>>* > found *>>* > Thread-13::DEBUG::2014-06-19 *>>* > 16:15:57,252::caps::458::root::(_getKeyPackages) rpm package *>>* > gluster-swift-plugin not found *>>* > Thread-13::DEBUG::2014-06-19 *>>* > 16:15:57,254::caps::458::root::(_getKeyPackages) rpm package *>>* > gluster-swift-account not found *>>* > Thread-13::DEBUG::2014-06-19 *>>* > 16:15:57,254::caps::458::root::(_getKeyPackages) rpm package *>>* > gluster-swift-proxy not found *>>* > Thread-13::DEBUG::2014-06-19 *>>* > 16:15:57,254::caps::458::root::(_getKeyPackages) rpm package *>>* > gluster-swift-doc not found *>>* > Thread-13::DEBUG::2014-06-19 *>>* > 16:15:57,255::caps::458::root::(_getKeyPackages) rpm package *>>* > glusterfs-server not found *>>* > Thread-13::DEBUG::2014-06-19 *>>* > 16:15:57,255::caps::458::root::(_getKeyPackages) rpm package *>>* > gluster-swift-container not found *>>* > Thread-13::DEBUG::2014-06-19 *>>* > 16:15:57,255::caps::458::root::(_getKeyPackages) rpm package *>>* > glusterfs-geo-replication not found *>>* > *>>* > Any ideas? *>>* > *>>* >><> *>>* > nathan stratton | vp technology | broadsoft, inc | +1-240-404-6580 <%2B1-240-404-6580> | *>>* > www.broadsoft.com <http://www.broadsoft.com/> *>>* > *>>* > _______________________________________________ *>>* > Users mailing list *>>* > Users at ovirt.org <http://lists.ovirt.org/mailman/listinfo/users> *>>* > http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users> *>>* > *>>>>-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.ovirt.org/pipermail/users/attachments/20140621/9b14c8fe/attach…> -- Patrick Pierson

1 0

Re: [ovirt-users] NFS
by Nikolai Sednev 16 Dec '14

16 Dec '14

------=_Part_10836963_1058080440.1418737821013 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Hi, Can you check iptables configured correctly, then put to maintenance host, power-cycle the host and after powered up and reachable, activate it in WEBUI? Thanks in advance. Best regards, Nikolai ____________________ Nikolai Sednev Senior Quality Engineer at Compute team Red Hat Israel 34 Jerusalem Road, Ra'anana, Israel 43501 Tel: +972 9 7692043 Mobile: +972 52 7342734 Email: nsednev(a)redhat.com IRC: nsednev ----- Original Message ----- From: users-request(a)ovirt.org To: users(a)ovirt.org Sent: Tuesday, December 16, 2014 3:31:27 PM Subject: Users Digest, Vol 39, Issue 96 Send Users mailing list submissions to users(a)ovirt.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.ovirt.org/mailman/listinfo/users or, via email, send a message with subject or body 'help' to users-request(a)ovirt.org You can reach the person managing the list at users-owner(a)ovirt.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Users digest..." Today's Topics: 1. Re: NFS (Nir Soffer) 2. Re: Problem after update ovirt to 3.5 (Simone Tiraboschi) 3. Re: Problem after update ovirt to 3.5 (Yedidyah Bar David) 4. Re: How to update zanata's source text ? (Alexander Wels) 5. Re: bash: ./autogen.sh: No such file or directory (Nir Soffer) 6. Re: VM disk tab doesn't show storage name after 3.5 upgrade (Nir Soffer) 7. Re: NFS (Bob Doolittle) ---------------------------------------------------------------------- Message: 1 Date: Tue, 16 Dec 2014 07:45:57 -0500 (EST) From: Nir Soffer <nsoffer(a)redhat.com> To: Koen Vanoppen <vanoppen.koen(a)gmail.com> Cc: users(a)ovirt.org Subject: Re: [ovirt-users] NFS Message-ID: <1775969167.13951943.1418733957101.JavaMail.zimbra(a)redhat.com> Content-Type: text/plain; charset=utf-8 ----- Original Message ----- > From: "Koen Vanoppen" <vanoppen.koen(a)gmail.com> > To: users(a)ovirt.org > Sent: Tuesday, December 16, 2014 10:00:32 AM > Subject: [ovirt-users] NFS > > Dear all, > > We recently added 2 hypervisors to the domain on ovirt, but for some reason > they can't connect to the nfs share: > When I manually try to mount the nfs-share ([root@ovirthyp01dev ~]# mount > -vvv -t nfs -o vers=3,tcp progress:/media/NfsProgress /rhev/data-center/mnt/ Looks like your server does not accept nfs version 3 - does it work if you remove the vers=3 option? > progress.brusselsairport.aero \:_media_NfsProgress/) > : > mount: external mount: argv[3] = "-v" > mount: external mount: argv[4] = "-o" > mount: external mount: argv[5] = "rw,vers=3,tcp" > mount.nfs: timeout set for Tue Dec 16 08:56:47 2014 > mount.nfs: trying text-based options 'vers=3,tcp,addr=10.110.56.20' > mount.nfs: prog 100003, trying vers=3, prot=6 > mount.nfs: portmap query failed: RPC: Program not registered > mount.nfs: requested NFS version or transport protocol is not supported > > From vdsm.log: > Thread-277::ERROR::2014-12-16 > 08:46:32,504::storageServer::211::Storage.StorageServer.MountConnection::(connect) > Mount failed: (32, ';mount.nfs: requested NFS version or transport protocol > is not supported\n') > Traceback (most recent call last): > File "/usr/share/vdsm/storage/storageServer.py", line 209, in connect > self._mount.mount(self.options, self._vfsType) > File "/usr/share/vdsm/storage/mount.py", line 223, in mount > return self._runcmd(cmd, timeout) > File "/usr/share/vdsm/storage/mount.py", line 239, in _runcmd > raise MountError(rc, ";".join((out, err))) > MountError: (32, ';mount.nfs: requested NFS version or transport protocol is > not supported\n') > Thread-277::ERROR::2014-12-16 > 08:46:32,508::hsm::2433::Storage.HSM::(connectStorageServer) Could not > connect to storageServer > Traceback (most recent call last): > File "/usr/share/vdsm/storage/hsm.py", line 2430, in connectStorageServer > conObj.connect() > File "/usr/share/vdsm/storage/storageServer.py", line 328, in connect > return self._mountCon.connect() > File "/usr/share/vdsm/storage/storageServer.py", line 217, in connect > raise e > MountError: (32, ';mount.nfs: requested NFS version or transport protocol is > not supported\n') > > Any ideas? The rest (4 others) didn't have any problems... 4 other servers? Try to compare the configuration between these servers. Nir ------------------------------ Message: 2 Date: Tue, 16 Dec 2014 07:48:17 -0500 (EST) From: Simone Tiraboschi <stirabos(a)redhat.com> To: Juan Jose <jj197005(a)gmail.com> Cc: users(a)ovirt.org Subject: Re: [ovirt-users] Problem after update ovirt to 3.5 Message-ID: <1161380684.12062869.1418734097118.JavaMail.zimbra(a)redhat.com> Content-Type: text/plain; charset=utf-8 ----- Original Message ----- > From: "Juan Jose" <jj197005(a)gmail.com> > To: "Yedidyah Bar David" <didi(a)redhat.com>, sbonazzo(a)redhat.com > Cc: users(a)ovirt.org > Sent: Tuesday, December 16, 2014 1:03:17 PM > Subject: Re: [ovirt-users] Problem after update ovirt to 3.5 > > Hello everybody, > > It was the firewall, after upgrade my engine the NFS configuration had > disappered, I have configured again as Red Hat says and now it works > properly again. > > Many thank again for the indications. We already had a patch for it [1], it will released next month with oVirt 3.5.1 [1] http://gerrit.ovirt.org/#/c/32874/ > Juanjo. > > On Mon, Dec 15, 2014 at 2:32 PM, Yedidyah Bar David < didi(a)redhat.com > > wrote: > > > ----- Original Message ----- > > From: "Juan Jose" < jj197005(a)gmail.com > > > To: users(a)ovirt.org > > Sent: Monday, December 15, 2014 3:17:15 PM > > Subject: [ovirt-users] Problem after update ovirt to 3.5 > > > > Hello everybody, > > > > After upgrade my engine to oVirt 3.5, I have also upgraded one of my hosts > > to > > oVirt 3.5. After that it seems that all have gone good aparently. > > > > But in some seconds my ISO domain is desconnected and it is impossible to > > Activate. I'm attaching my engine.log. The below error is showed each time > > I > > try to Activate the ISO domain. Before the upgrade it was working without > > problems: > > > > 2014-12-15 13:25:07,607 ERROR > > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > > (org.ovirt.thread.pool-8-thread-5) [460733dd] Correlation ID: null, Call > > Stack: null, Custom Event ID: -1, Message: Failed to connect Host host1 to > > the Storage Domains ISO_DOMAIN. > > 2014-12-15 13:25:07,608 INFO > > [org.ovirt.engine.core.vdsbroker.vdsbroker.ConnectStorageServerVDSCommand] > > (org.ovirt.thread.pool-8-thread-5) [460733dd] FINISH, > > ConnectStorageServerVDSCommand, return: > > {81c0a853-715c-4478-a812-6a74808fc482=477}, log id: 3590969e > > 2014-12-15 13:25:07,615 ERROR > > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > > (org.ovirt.thread.pool-8-thread-5) [460733dd] Correlation ID: null, Call > > Stack: null, Custom Event ID: -1, Message: The error message for connection > > ovirt-engine.siee.local:/var/lib/exports/iso-20140303082312 returned by > > VDSM > > was: Problem while trying to mount target > > 2014-12-15 13:25:07,616 ERROR > > [org.ovirt.engine.core.bll.storage.NFSStorageHelper] > > (org.ovirt.thread.pool-8-thread-5) [460733dd] The connection with details > > ovirt-engine.siee.local:/var/lib/exports/iso-20140303082312 failed because > > of error code 477 and error message is: problem while trying to mount > > target > > > > If any other information is required, please tell me. > > Is the ISO domain on the engine host? > > Please check there iptables and /etc/exports, /etc/exports.d. > > Please post the setup (upgrade) log, check /var/log/ovirt-engine/setup. > > Thanks, > -- > Didi > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > ------------------------------ Message: 3 Date: Tue, 16 Dec 2014 07:52:09 -0500 (EST) From: Yedidyah Bar David <didi(a)redhat.com> To: Juan Jose <jj197005(a)gmail.com> Cc: users(a)ovirt.org Subject: Re: [ovirt-users] Problem after update ovirt to 3.5 Message-ID: <1501161471.29130974.1418734329990.JavaMail.zimbra(a)redhat.com> Content-Type: text/plain; charset=utf-8 ----- Original Message ----- > From: "Juan Jose" <jj197005(a)gmail.com> > To: "Yedidyah Bar David" <didi(a)redhat.com>, sbonazzo(a)redhat.com > Cc: users(a)ovirt.org > Sent: Tuesday, December 16, 2014 2:03:17 PM > Subject: Re: [ovirt-users] Problem after update ovirt to 3.5 > > Hello everybody, > > It was the firewall, after upgrade my engine the NFS configuration had > disappered, I have configured again as Red Hat says and now it works > properly again. > > Many thank again for the indications. Sorry I didn't mention it before, this is a known bug [1]. Will be fixed in 3.5.1. [1] https://bugzilla.redhat.com/1109326 -- Didi ------------------------------ Message: 4 Date: Tue, 16 Dec 2014 07:52:33 -0500 From: Alexander Wels <awels(a)redhat.com> To: plysan <plysab(a)gmail.com> Cc: "Users(a)ovirt.org List" <users(a)ovirt.org> Subject: Re: [ovirt-users] How to update zanata's source text ? Message-ID: <3939744.arHGUUsGyg@awels> Content-Type: text/plain; charset="us-ascii" On Tuesday, December 16, 2014 10:35:18 AM plysan wrote: > 2014-12-15 22:27 GMT+08:00 Einav Cohen <ecohen(a)redhat.com>: > > > ----- Original Message ----- > > > From: "Alexander Wels" <awels(a)redhat.com> > > > Sent: Monday, December 15, 2014 7:45:41 AM > > > > > > On Sunday, December 14, 2014 03:03:56 PM plysan wrote: > > > > Hi, > > > > > > > > When I'm trying to compile ovirt-engine-3.5 branch with pulled zanata > > > > source files, I get webadmin compilation errors. And the error message > > > > lead > > > > > > me to the outdated zanata translation > > > > file: org.ovirt.engine.ui.webadmin.ApplicationMessages > > > > The file has a source text called "{0} (VLAN {1})", but recent commit > > > > b068ec755198c27e65f936809104ba5068cd8fd2 > > > > has changed the text to "(VLAN {0})" > > > > > > > > So is there a way to update the zanata's source text (text on the > > > > left) ? > > > > > > It seems that I don't get any options to update it, I can only update > > > > the > > > > > > target text (text on the right). > > > > > > > > thanks. > > > > > > The zanata source text is generated from default values from the ovirt > > > > source > > > > > code. Einav should know more about exactly how that is done. You should > > > always > > > match the translation to the source and not the other way around. So I > > > > am not > > > > > sure why you are trying to change the source. > > > > Alexander is correct; the source text cannot and should not be changed > > directly in Zanata. > > > > in order to update the source (English) text in Zanata, it needs to be > > pushed to Zanata from the source code. > > > > generally, we are not updating anything in Zanata for 3.5 anymore, since > > we are not planning any additional translation cycles for ovirt 3.5; > > however, since we are planning out-of-cycle possible updates for the > > German > > and Italian translation as an exception for 3.5, it *may* also involve > > pushing the updated source text to Zanata as part of the process, but this > > will not happen any time soon, to my understanding. > > > > I am not sure if you were trying to pull the latest translations from > > Zanata > > and then build ovirt-engine-3.5, or simply tried to build ovirt-engine-3.5 > > as is; > > if you were trying to build ovirt-engine-3.5 as-is and failed, that's bad > > - > > we need to fix that ASAP (however, I am pretty sure that we would have > > been > > notified about this issue already from jenkins / other people / etc.). > > I recommend to not attempt pulling the translations from Zanata yourself, > > as the pull itself is not enough - need to move some files around, run a > > few > > clean-up scripts, etc. If you still want to pull the translations > > yourself, > > and you are encountering problems as the ones you mentioned above - simply > > remove/"fix" the problematic translations *locally on the .properties > > files > > that you pulled from Zanata - NOT in Zanata itself*. > > Thanks for your responses. > > If I want to make some translation updates in zh_CN, Is it means that the > workflow is first modifying ovirt source code translations and then update > it to zanata ? > But zanata has a user friendly UI and has features that translator likes. > So I think first modifying translations in zanata and then update it to the > source code is better. Just my thoughts :) > The flow for some new text is the following: 1. The developer writes some new functionality. 2. The developer writes the *English* default message for that functionality. This includes a key to be used by the translators. 3. Some process takes those new message(s) and puts the *English* translation and the key into zanata. 4. The translator sees the key AND the English version in zanata and provides the localized version in zanata. 5. Some process pulls the translation from zanata and puts it into the source code (In a properties file). As you can see by the workflow the translator simply translated the English version of some message in zanata and that then automatically gets into the source code without the translator having to do anything besides that. Once you have made the change in zanata it will eventually end up in the project. The process in step 5 is not automatic. Now if you want to change a message in a particular locale and immediately see it, then you have manually modify the properties file for the locale you are interested in and compile the project. > thanks. > > > > _______________________________________________ > > > Users mailing list > > > Users(a)ovirt.org > > > http://lists.ovirt.org/mailman/listinfo/users ------------------------------ Message: 5 Date: Tue, 16 Dec 2014 08:24:52 -0500 (EST) From: Nir Soffer <nsoffer(a)redhat.com> To: Ilan Hirsfeld <ilan.hirsfeld(a)gmail.com> Cc: users <users(a)ovirt.org> Subject: Re: [ovirt-users] bash: ./autogen.sh: No such file or directory Message-ID: <595905649.13968762.1418736292641.JavaMail.zimbra(a)redhat.com> Content-Type: text/plain; charset=utf-8 ----- Original Message ----- > From: "Ilan Hirsfeld" <ilan.hirsfeld(a)gmail.com> > To: "Yeela Kaplan" <ykaplan(a)redhat.com> > Cc: "users" <users(a)ovirt.org> > Sent: Monday, December 15, 2014 6:00:47 PM > Subject: Re: [ovirt-users] bash: ./autogen.sh: No such file or directory > > Are you sure??? > Because in instruction is written: > "Fedora and Red Hat Enterprise Linux 6 users must verify the following Thanks for reporting this, fixed now. > packages are installed before attempting to build:" > As far as I understand I EL7 not EL6. if you still think I have to do the > requested command line so should I have to do the previous command lines of > EL6 such as: > yum install > http://download.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.r… > yum install http://danken.fedorapeople.org/python-pep8-1.4.5-2.el6.noarch.rpm > Am I wrong? > Regards, > Ilan. Nir ------------------------------ Message: 6 Date: Tue, 16 Dec 2014 08:28:27 -0500 (EST) From: Nir Soffer <nsoffer(a)redhat.com> To: Ernest Beinrohr <Ernest.Beinrohr(a)axonpro.sk> Cc: users <users(a)ovirt.org> Subject: Re: [ovirt-users] VM disk tab doesn't show storage name after 3.5 upgrade Message-ID: <964774187.13970271.1418736507786.JavaMail.zimbra(a)redhat.com> Content-Type: text/plain; charset=utf-8 ----- Original Message ----- > From: "Ernest Beinrohr" <Ernest.Beinrohr(a)axonpro.sk> > To: "users" <users(a)ovirt.org> > Sent: Monday, December 15, 2014 4:01:05 PM > Subject: [ovirt-users] VM disk tab doesn't show storage name after 3.5 upgrade > > Before 3.5 in VM disk tab, there was the name of the storage on which the > disks resides. After the upgrade to 3.5 this information is missing. > > > PS: as a workaround I have to "edit" the disk to see where it it. I have 7 > storages so this info is important for me. Sounds like a regression, please open a bug for this. Nir ------------------------------ Message: 7 Date: Tue, 16 Dec 2014 08:31:23 -0500 From: Bob Doolittle <bob(a)doolittle.us.com> To: Koen Vanoppen <vanoppen.koen(a)gmail.com>, "users(a)ovirt.org" <users(a)ovirt.org> Subject: Re: [ovirt-users] NFS Message-ID: <5490342B.6070107(a)doolittle.us.com> Content-Type: text/plain; charset="windows-1252" 95% of the time this is a firewall issue. As a test, I'd disable your firewall completely and see if that rectifies it. If so, you can work on proper firewall rules to allow oVirt to work. -Bob On 12/16/2014 03:30 AM, Koen Vanoppen wrote: > Already installed... :-) and the service nfs and rpcbind are running > > 2014-12-16 9:07 GMT+01:00 Karli Sj?berg <karli.sjoberg(a)slu.se > <mailto:karli.sjoberg@slu.se>>: > > On Tue, 2014-12-16 at 09:00 +0100, Koen Vanoppen wrote: > > Dear all, > > > > > > We recently added 2 hypervisors to the domain on ovirt, but for some > > reason they can't connect to the nfs share: > > When I manually try to mount the nfs-share ([root@ovirthyp01dev ~]# > > mount -vvv -t nfs -o vers=3,tcp > > progress:/media/NfsProgress > /rhev/data-center/mnt/progress.brusselsairport.aero > <http://progress.brusselsairport.aero>\:_media_NfsProgress/) > > : > > mount: external mount: argv[3] = "-v" > > mount: external mount: argv[4] = "-o" > > mount: external mount: argv[5] = "rw,vers=3,tcp" > > mount.nfs: timeout set for Tue Dec 16 08:56:47 2014 > > mount.nfs: trying text-based options 'vers=3,tcp,addr=10.110.56.20' > > mount.nfs: prog 100003, trying vers=3, prot=6 > > mount.nfs: portmap query failed: RPC: Program not registered > > mount.nfs: requested NFS version or transport protocol is not > > supported > > > > > > From vdsm.log: > > Thread-277::ERROR::2014-12-16 > > > 08:46:32,504::storageServer::211::Storage.StorageServer.MountConnection::(connect) > Mount failed: (32, ';mount.nfs: requested NFS version or transport > protocol is not supported\n') > > Traceback (most recent call last): > > File "/usr/share/vdsm/storage/storageServer.py", line 209, in > > connect > > self._mount.mount(self.options, self._vfsType) > > File "/usr/share/vdsm/storage/mount.py", line 223, in mount > > return self._runcmd(cmd, timeout) > > File "/usr/share/vdsm/storage/mount.py", line 239, in _runcmd > > raise MountError(rc, ";".join((out, err))) > > MountError: (32, ';mount.nfs: requested NFS version or transport > > protocol is not supported\n') > > Thread-277::ERROR::2014-12-16 > > 08:46:32,508::hsm::2433::Storage.HSM::(connectStorageServer) > Could not > > connect to storageServer > > Traceback (most recent call last): > > File "/usr/share/vdsm/storage/hsm.py", line 2430, in > > connectStorageServer > > conObj.connect() > > File "/usr/share/vdsm/storage/storageServer.py", line 328, in > > connect > > return self._mountCon.connect() > > File "/usr/share/vdsm/storage/storageServer.py", line 217, in > > connect > > raise e > > MountError: (32, ';mount.nfs: requested NFS version or transport > > protocol is not supported\n') > > > > > > Any ideas? The rest (4 others) didn't have any problems... > > > > > > plain text document attachment (ATT00001) > > _______________________________________________ > > Users mailing list > > Users(a)ovirt.org <mailto:Users@ovirt.org> > > http://lists.ovirt.org/mailman/listinfo/users > > # yum install -y nfs-utils > > ? > > > > -- > > Med V?nliga H?lsningar > > ------------------------------------------------------------------------------- > Karli Sj?berg > Swedish University of Agricultural Sciences Box 7079 (Visiting Address > Kron?sv?gen 8) > S-750 07 Uppsala, Sweden > Phone: +46-(0)18-67 15 66 <tel:%2B46-%280%2918-67%2015%2066> > karli.sjoberg(a)slu.se <mailto:karli.sjoberg@slu.se> > > > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.ovirt.org/pipermail/users/attachments/20141216/6fbaaec0/attach…> ------------------------------ _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users End of Users Digest, Vol 39, Issue 96 ************************************* ------=_Part_10836963_1058080440.1418737821013 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"font-family: georgia,serif; font-size: 12pt; colo= r: #000000"><div>Hi,<br></div><div>Can you check iptables configured correc= tly, then put to maintenance host, power-cycle the host and after powered u= p and reachable, activate it in WEBUI?</div><div><br></div><div><span name= =3D"x"></span><br>Thanks in advance.<br><div><br></div>Best regards,<br>Nik= olai<br>____________________<br>Nikolai Sednev<br>Senior Quality Engineer a= t Compute team<br>Red Hat Israel<br>34 Jerusalem Road,<br>Ra'anana, Israel = 43501<br><div><br></div>Tel:       +972   9 7692043<br>= Mobile: +972 52 7342734<br>Email: nsednev(a)redhat.com<br>IRC: nsednev<span n= ame=3D"x"></span><br></div><div><br></div><hr id=3D"zwchr"><div style=3D"co= lor:#000;font-weight:normal;font-style:normal;text-decoration:none;font-fam= ily:Helvetica,Arial,sans-serif;font-size:12pt;"><b>From: </b>users-request@= ovirt.org<br><b>To: </b>users(a)ovirt.org<br><b>Sent: </b>Tuesday, December 1= 6, 2014 3:31:27 PM<br><b>Subject: </b>Users Digest, Vol 39, Issue 96<br><di= v><br></div>Send Users mailing list submissions to<br>   &nb= sp;    users(a)ovirt.org<br><div><br></div>To subscribe o= r unsubscribe via the World Wide Web, visit<br>    &nbs= p;   http://lists.ovirt.org/mailman/listinfo/users<br>or, vi= a email, send a message with subject or body 'help' to<br>  &nbsp= ;     users-request(a)ovirt.org<br><div><br></div>Yo= u can reach the person managing the list at<br>    &nbs= p;   users-owner(a)ovirt.org<br><div><br></div>When replying, = please edit your Subject line so it is more specific<br>than "Re: Contents = of Users digest..."<br><div><br></div><br>Today's Topics:<br><div><br></div= >   1. Re:  NFS (Nir Soffer)<br>   2. Re:  Pr= oblem after update ovirt to 3.5 (Simone Tiraboschi)<br>   3. Re: =  Problem after update ovirt to 3.5 (Yedidyah Bar David)<br> &nbsp= ; 4. Re:  How to update zanata's source text ? (Alexander Wels)<br>&nb= sp;  5. Re:  bash: ./autogen.sh: No such file or directory (Nir S= offer)<br>   6. Re:  VM disk tab doesn't show storage name a= fter 3.5 upgrade<br>      (Nir Soffer)<br>   = 7. Re:  NFS (Bob Doolittle)<br><div><br></div><br>--------------------= --------------------------------------------------<br><div><br></div>Messag= e: 1<br>Date: Tue, 16 Dec 2014 07:45:57 -0500 (EST)<br>From: Nir Soffer &lt= ;nsoffer(a)redhat.com><br>To: Koen Vanoppen <vanoppen.koen(a)gmail.com&gt= ;<br>Cc: users(a)ovirt.org<br>Subject: Re: [ovirt-users] NFS<br>Message-ID:<b= r>        <1775969167.13951943.1= 418733957101.JavaMail.zimbra(a)redhat.com><br>Content-Type: text/plain; ch= arset=3Dutf-8<br><div><br></div>----- Original Message -----<br>> From: = "Koen Vanoppen" <vanoppen.koen(a)gmail.com><br>> To: users(a)ovirt.org= <br>> Sent: Tuesday, December 16, 2014 10:00:32 AM<br>> Subject: [ovi= rt-users] NFS<br>> <br>> Dear all,<br>> <br>> We recently added= 2 hypervisors to the domain on ovirt, but for some reason<br>> they can= 't connect to the nfs share:<br>> When I manually try to mount the nfs-s= hare ([root@ovirthyp01dev ~]# mount<br>> -vvv -t nfs -o vers=3D3,tcp pro= gress:/media/NfsProgress /rhev/data-center/mnt/<br><div><br></div>Looks lik= e your server does not accept nfs version 3 - does it work<br>if you remove= the vers=3D3 option?<br><div><br></div>> progress.brusselsairport.aero = \:_media_NfsProgress/)<br>> :<br>> mount: external mount: argv[3] =3D= "-v"<br>> mount: external mount: argv[4] =3D "-o"<br>> mount: extern= al mount: argv[5] =3D "rw,vers=3D3,tcp"<br>> mount.nfs: timeout set for = Tue Dec 16 08:56:47 2014<br>> mount.nfs: trying text-based options 'vers= =3D3,tcp,addr=3D10.110.56.20'<br>> mount.nfs: prog 100003, trying vers= =3D3, prot=3D6<br>> mount.nfs: portmap query failed: RPC: Program not re= gistered<br>> mount.nfs: requested NFS version or transport protocol is = not supported<br>> <br>> From vdsm.log:<br>> Thread-277::ERROR::20= 14-12-16<br>> 08:46:32,504::storageServer::211::Storage.StorageServer.Mo= untConnection::(connect)<br>> Mount failed: (32, ';mount.nfs: requested = NFS version or transport protocol<br>> is not supported\n')<br>> Trac= eback (most recent call last):<br>> File "/usr/share/vdsm/storage/storag= eServer.py", line 209, in connect<br>> self._mount.mount(self.options, s= elf._vfsType)<br>> File "/usr/share/vdsm/storage/mount.py", line 223, in= mount<br>> return self._runcmd(cmd, timeout)<br>> File "/usr/share/v= dsm/storage/mount.py", line 239, in _runcmd<br>> raise MountError(rc, ";= ".join((out, err)))<br>> MountError: (32, ';mount.nfs: requested NFS ver= sion or transport protocol is<br>> not supported\n')<br>> Thread-277:= :ERROR::2014-12-16<br>> 08:46:32,508::hsm::2433::Storage.HSM::(connectSt= orageServer) Could not<br>> connect to storageServer<br>> Traceback (= most recent call last):<br>> File "/usr/share/vdsm/storage/hsm.py", line= 2430, in connectStorageServer<br>> conObj.connect()<br>> File "/usr/= share/vdsm/storage/storageServer.py", line 328, in connect<br>> return s= elf._mountCon.connect()<br>> File "/usr/share/vdsm/storage/storageServer= .py", line 217, in connect<br>> raise e<br>> MountError: (32, ';mount= .nfs: requested NFS version or transport protocol is<br>> not supported\= n')<br>> <br>> Any ideas? The rest (4 others) didn't have any problem= s...<br><div><br></div>4 other servers?<br><div><br></div>Try to compare th= e configuration between these servers.<br><div><br></div>Nir<br><div><br></= div><br>------------------------------<br><div><br></div>Message: 2<br>Date= : Tue, 16 Dec 2014 07:48:17 -0500 (EST)<br>From: Simone Tiraboschi <stir= abos(a)redhat.com><br>To: Juan Jose <jj197005(a)gmail.com><br>Cc: user= s(a)ovirt.org<br>Subject: Re: [ovirt-users] Problem after update ovirt to 3.5= <br>Message-ID:<br>        <1161= 380684.12062869.1418734097118.JavaMail.zimbra(a)redhat.com><br>Content-Typ= e: text/plain; charset=3Dutf-8<br><div><br></div><br><div><br></div>----- O= riginal Message -----<br>> From: "Juan Jose" <jj197005(a)gmail.com><= br>> To: "Yedidyah Bar David" <didi(a)redhat.com>, sbonazzo(a)redhat.c= om<br>> Cc: users(a)ovirt.org<br>> Sent: Tuesday, December 16, 2014 1:0= 3:17 PM<br>> Subject: Re: [ovirt-users] Problem after update ovirt to 3.= 5<br>> <br>> Hello everybody,<br>> <br>> It was the firewall, a= fter upgrade my engine the NFS configuration had<br>> disappered, I have= configured again as Red Hat says and now it works<br>> properly again.<= br>> <br>> Many thank again for the indications.<br><div><br></div>We= already had a patch for it [1],<br>it will released next month with oVirt = 3.5.1<br><div><br></div>[1] http://gerrit.ovirt.org/#/c/32874/<br><div><br>= </div>> Juanjo.<br>> <br>> On Mon, Dec 15, 2014 at 2:32 PM, Yedidy= ah Bar David < didi(a)redhat.com ><br>> wrote:<br>> <br>> <br>= > ----- Original Message -----<br>> > From: "Juan Jose" < jj197= 005(a)gmail.com ><br>> > To: users(a)ovirt.org<br>> > Sent: Mond= ay, December 15, 2014 3:17:15 PM<br>> > Subject: [ovirt-users] Proble= m after update ovirt to 3.5<br>> > <br>> > Hello everybody,<br>= > > <br>> > After upgrade my engine to oVirt 3.5, I have also u= pgraded one of my hosts<br>> > to<br>> > oVirt 3.5. After that = it seems that all have gone good aparently.<br>> > <br>> > But = in some seconds my ISO domain is desconnected and it is impossible to<br>&g= t; > Activate. I'm attaching my engine.log. The below error is showed ea= ch time<br>> > I<br>> > try to Activate the ISO domain. Before = the upgrade it was working without<br>> > problems:<br>> > <br>= > > 2014-12-15 13:25:07,607 ERROR<br>> > [org.ovirt.engine.core= .dal.dbbroker.auditloghandling.AuditLogDirector]<br>> > (org.ovirt.th= read.pool-8-thread-5) [460733dd] Correlation ID: null, Call<br>> > St= ack: null, Custom Event ID: -1, Message: Failed to connect Host host1 to<br= >> > the Storage Domains ISO_DOMAIN.<br>> > 2014-12-15 13:25:07= ,608 INFO<br>> > [org.ovirt.engine.core.vdsbroker.vdsbroker.ConnectSt= orageServerVDSCommand]<br>> > (org.ovirt.thread.pool-8-thread-5) [460= 733dd] FINISH,<br>> > ConnectStorageServerVDSCommand, return:<br>>= > {81c0a853-715c-4478-a812-6a74808fc482=3D477}, log id: 3590969e<br>&gt= ; > 2014-12-15 13:25:07,615 ERROR<br>> > [org.ovirt.engine.core.da= l.dbbroker.auditloghandling.AuditLogDirector]<br>> > (org.ovirt.threa= d.pool-8-thread-5) [460733dd] Correlation ID: null, Call<br>> > Stack= : null, Custom Event ID: -1, Message: The error message for connection<br>&= gt; > ovirt-engine.siee.local:/var/lib/exports/iso-20140303082312 return= ed by<br>> > VDSM<br>> > was: Problem while trying to mount tar= get<br>> > 2014-12-15 13:25:07,616 ERROR<br>> > [org.ovirt.engi= ne.core.bll.storage.NFSStorageHelper]<br>> > (org.ovirt.thread.pool-8= -thread-5) [460733dd] The connection with details<br>> > ovirt-engine= .siee.local:/var/lib/exports/iso-20140303082312 failed because<br>> >= of error code 477 and error message is: problem while trying to mount<br>&= gt; > target<br>> > <br>> > If any other information is requ= ired, please tell me.<br>> <br>> Is the ISO domain on the engine host= ?<br>> <br>> Please check there iptables and /etc/exports, /etc/expor= ts.d.<br>> <br>> Please post the setup (upgrade) log, check /var/log/= ovirt-engine/setup.<br>> <br>> Thanks,<br>> --<br>> Didi<br>&gt= ; <br>> _______________________________________________<br>> Users ma= iling list<br>> Users(a)ovirt.org<br>> http://lists.ovirt.org/mailman/l= istinfo/users<br>> <br><div><br></div><br>------------------------------= <br><div><br></div>Message: 3<br>Date: Tue, 16 Dec 2014 07:52:09 -0500 (EST= )<br>From: Yedidyah Bar David <didi(a)redhat.com><br>To: Juan Jose <= jj197005(a)gmail.com><br>Cc: users(a)ovirt.org<br>Subject: Re: [ovirt-users]= Problem after update ovirt to 3.5<br>Message-ID:<br>   &nbs= p;    <1501161471.29130974.1418734329990.JavaMail.zi= mbra(a)redhat.com><br>Content-Type: text/plain; charset=3Dutf-8<br><div><b= r></div>----- Original Message -----<br>> From: "Juan Jose" <jj197005= @gmail.com><br>> To: "Yedidyah Bar David" <didi(a)redhat.com>, sb= onazzo(a)redhat.com<br>> Cc: users(a)ovirt.org<br>> Sent: Tuesday, Decemb= er 16, 2014 2:03:17 PM<br>> Subject: Re: [ovirt-users] Problem after upd= ate ovirt to 3.5<br>> <br>> Hello everybody,<br>> <br>> It was = the firewall, after upgrade my engine the NFS configuration had<br>> dis= appered, I have configured again as Red Hat says and now it works<br>> p= roperly again.<br>> <br>> Many thank again for the indications.<br><d= iv><br></div>Sorry I didn't mention it before, this is a known bug [1]. Wil= l be fixed<br>in 3.5.1.<br><div><br></div>[1] https://bugzilla.redhat.com/1= 109326<br>-- <br>Didi<br><div><br></div><br><div><br></div>----------------= --------------<br><div><br></div>Message: 4<br>Date: Tue, 16 Dec 2014 07:52= :33 -0500<br>From: Alexander Wels <awels(a)redhat.com><br>To: plysan &l= t;plysab(a)gmail.com><br>Cc: "Users(a)ovirt.org List" <users(a)ovirt.org&gt= ;<br>Subject: Re: [ovirt-users] How to update zanata's source text ?<br>Mes= sage-ID: <3939744.arHGUUsGyg@awels><br>Content-Type: text/plain; char= set=3D"us-ascii"<br><div><br></div>On Tuesday, December 16, 2014 10:35:18 A= M plysan wrote:<br>> 2014-12-15 22:27 GMT+08:00 Einav Cohen <ecohen@r= edhat.com>:<br>> > > ----- Original Message -----<br>> > = > From: "Alexander Wels" <awels(a)redhat.com><br>> > > Sent= : Monday, December 15, 2014 7:45:41 AM<br>> > > <br>> > >= On Sunday, December 14, 2014 03:03:56 PM plysan wrote:<br>> > > &= gt; Hi,<br>> > > > <br>> > > > When I'm trying to c= ompile ovirt-engine-3.5 branch with pulled zanata<br>> > > > so= urce files, I get webadmin compilation errors. And the error message<br>&gt= ; > <br>> > lead<br>> > <br>> > > > me to the ou= tdated zanata translation<br>> > > > file: org.ovirt.engine.ui.= webadmin.ApplicationMessages<br>> > > > The file has a source t= ext called "{0} (VLAN {1})", but recent commit<br>> > > > b068e= c755198c27e65f936809104ba5068cd8fd2<br>> > > > has changed the = text to "(VLAN {0})"<br>> > > > <br>> > > > So is t= here a way to update the zanata's source text (text on the<br>> > <br= >> > left) ?<br>> > <br>> > > > It seems that I don= 't get any options to update it, I can only update<br>> > <br>> &g= t; the<br>> > <br>> > > > target text (text on the right)= .<br>> > > > <br>> > > > thanks.<br>> > > = <br>> > > The zanata source text is generated from default values = from the ovirt<br>> > <br>> > source<br>> > <br>> >= > code. Einav should know more about exactly how that is done. You shou= ld<br>> > > always<br>> > > match the translation to the = source and not the other way around. So I<br>> > <br>> > am not= <br>> > <br>> > > sure why you are trying to change the sour= ce.<br>> > <br>> > Alexander is correct; the source text cannot= and should not be changed<br>> > directly in Zanata.<br>> > <b= r>> > in order to update the source (English) text in Zanata, it need= s to be<br>> > pushed to Zanata from the source code.<br>> > <b= r>> > generally, we are not updating anything in Zanata for 3.5 anymo= re, since<br>> > we are not planning any additional translation cycle= s for ovirt 3.5;<br>> > however, since we are planning out-of-cycle p= ossible updates for the<br>> > German<br>> > and Italian transl= ation as an exception for 3.5, it *may* also involve<br>> > pushing t= he updated source text to Zanata as part of the process, but this<br>> &= gt; will not happen any time soon, to my understanding.<br>> > <br>&g= t; > I am not sure if you were trying to pull the latest translations fr= om<br>> > Zanata<br>> > and then build ovirt-engine-3.5, or sim= ply tried to build ovirt-engine-3.5<br>> > as is;<br>> > if you= were trying to build ovirt-engine-3.5 as-is and failed, that's bad<br>>= > -<br>> > we need to fix that ASAP (however, I am pretty sure th= at we would have<br>> > been<br>> > notified about this issue a= lready from jenkins / other people / etc.).<br>> > I recommend to not= attempt pulling the translations from Zanata yourself,<br>> > as the= pull itself is not enough - need to move some files around, run a<br>> = > few<br>> > clean-up scripts, etc. If you still want to pull the = translations<br>> > yourself,<br>> > and you are encountering p= roblems as the ones you mentioned above - simply<br>> > remove/"fix" = the problematic translations *locally on the .properties<br>> > files= <br>> > that you pulled from Zanata - NOT in Zanata itself*.<br>> = <br>> Thanks for your responses.<br>> <br>> If I want to make some= translation updates in zh_CN, Is it means that the<br>> workflow is fir= st modifying ovirt source code translations and then update<br>> it to z= anata ?<br>> But zanata has a user friendly UI and has features that tra= nslator likes.<br>> So I think first modifying translations in zanata an= d then update it to the<br>> source code is better. Just my thoughts :)<= br>> <br><div><br></div>The flow for some new text is the following:<br>= <div><br></div>1. The developer writes some new functionality.<br>2. The de= veloper writes the *English* default message for that functionality. <br>Th= is includes a key to be used by the translators.<br>3. Some process takes t= hose new message(s) and puts the *English* translation <br>and the key into= zanata.<br>4. The translator sees the key AND the English version in zanat= a and provides <br>the localized version in zanata.<br>5. Some process pull= s the translation from zanata and puts it into the source <br>code (In a pr= operties file).<br><div><br></div><br>As you can see by the workflow the tr= anslator simply translated the English <br>version of some message in zanat= a and that then automatically gets into the <br>source code without the tra= nslator having to do anything besides that. Once <br>you have made the chan= ge in zanata it will eventually end up in the project. <br>The process in s= tep 5 is not automatic.<br><div><br></div>Now if you want to change a messa= ge in a particular locale and immediately see <br>it, then you have manuall= y modify the properties file for the locale you are <br>interested in and c= ompile the project.<br><div><br></div>> thanks.<br>> <br>> > &g= t; _______________________________________________<br>> > > Users = mailing list<br>> > > Users(a)ovirt.org<br>> > > http://lis= ts.ovirt.org/mailman/listinfo/users<br><div><br></div><br><div><br></div>--= ----------------------------<br><div><br></div>Message: 5<br>Date: Tue, 16 = Dec 2014 08:24:52 -0500 (EST)<br>From: Nir Soffer <nsoffer(a)redhat.com&gt= ;<br>To: Ilan Hirsfeld <ilan.hirsfeld(a)gmail.com><br>Cc: users <use= rs(a)ovirt.org><br>Subject: Re: [ovirt-users] bash: ./autogen.sh: No such = file or<br>        directory<br>Mes= sage-ID:<br>        <595905649.1= 3968762.1418736292641.JavaMail.zimbra(a)redhat.com><br>Content-Type: text/= plain; charset=3Dutf-8<br><div><br></div>----- Original Message -----<br>&g= t; From: "Ilan Hirsfeld" <ilan.hirsfeld(a)gmail.com><br>> To: "Yeela= Kaplan" <ykaplan(a)redhat.com><br>> Cc: "users" <users(a)ovirt.org= ><br>> Sent: Monday, December 15, 2014 6:00:47 PM<br>> Subject: Re= : [ovirt-users] bash: ./autogen.sh: No such file or directory<br>> <br>&= gt; Are you sure???<br>> Because in instruction is written:<br>> "Fed= ora and Red Hat Enterprise Linux 6 users must verify the following<br><div>= <br></div>Thanks for reporting this, fixed now.<br><div><br></div>> pack= ages are installed before attempting to build:"<br>> As far as I underst= and I EL7 not EL6. if you still think I have to do the<br>> requested co= mmand line so should I have to do the previous command lines of<br>> EL6= such as:<br>> yum install<br>> http://download.fedoraproject.org/pub= /epel/6/i386/epel-release-6-8.noarch.rpm<br>> yum install http://danken.= fedorapeople.org/python-pep8-1.4.5-2.el6.noarch.rpm<br>> Am I wrong?<br>= > Regards,<br>> Ilan.<br><div><br></div>Nir<br><div><br></div><br>---= ---------------------------<br><div><br></div>Message: 6<br>Date: Tue, 16 D= ec 2014 08:28:27 -0500 (EST)<br>From: Nir Soffer <nsoffer(a)redhat.com>= <br>To: Ernest Beinrohr <Ernest.Beinrohr(a)axonpro.sk><br>Cc: users &lt= ;users(a)ovirt.org><br>Subject: Re: [ovirt-users] VM disk tab doesn't show= storage name after<br>        3.5 = upgrade<br>Message-ID:<br>        &= lt;964774187.13970271.1418736507786.JavaMail.zimbra(a)redhat.com><br>Conte= nt-Type: text/plain; charset=3Dutf-8<br><div><br></div>----- Original Messa= ge -----<br>> From: "Ernest Beinrohr" <Ernest.Beinrohr(a)axonpro.sk>= <br>> To: "users" <users(a)ovirt.org><br>> Sent: Monday, December= 15, 2014 4:01:05 PM<br>> Subject: [ovirt-users] VM disk tab doesn't sho= w storage name after 3.5        upg= rade<br>> <br>> Before 3.5 in VM disk tab, there was the name of the = storage on which the<br>> disks resides. After the upgrade to 3.5 this i= nformation is missing.<br>> <br>> <br>> PS: as a workaround I have= to "edit" the disk to see where it it. I have 7<br>> storages so this i= nfo is important for me.<br><div><br></div>Sounds like a regression, please= open a bug for this.<br><div><br></div>Nir<br><div><br></div><br>---------= ---------------------<br><div><br></div>Message: 7<br>Date: Tue, 16 Dec 201= 4 08:31:23 -0500<br>From: Bob Doolittle <bob(a)doolittle.us.com><br>To:= Koen Vanoppen <vanoppen.koen(a)gmail.com>,     &nb= sp;   "users(a)ovirt.org"<br>     &nb= sp;  <users(a)ovirt.org><br>Subject: Re: [ovirt-users] NFS<br= >Message-ID: <5490342B.6070107(a)doolittle.us.com><br>Content-Type: tex= t/plain; charset=3D"windows-1252"<br><div><br></div>95% of the time this is= a firewall issue.<br><div><br></div>As a test, I'd disable your firewall c= ompletely and see if that<br>rectifies it. If so, you can work on proper fi= rewall rules to allow<br>oVirt to work.<br><div><br></div>-Bob<br><div><br>= </div>On 12/16/2014 03:30 AM, Koen Vanoppen wrote:<br>> Already installe= d... :-) and the service nfs and rpcbind are running<br>><br>> 2014-1= 2-16 9:07 GMT+01:00 Karli Sj?berg <karli.sjoberg(a)slu.se<br>> <mail= to:karli.sjoberg@slu.se>>:<br>><br>>     On Tue, 2014= -12-16 at 09:00 +0100, Koen Vanoppen wrote:<br>>     > Dear= all,<br>>     ><br>>     ><br>>   =   > We recently added 2 hypervisors to the domain on ovirt, but for= some<br>>     > reason they can't connect to the nfs share= :<br>>     > When I manually try to mount the nfs-share ([r= oot@ovirthyp01dev ~]#<br>>     > mount -vvv -t nfs -o vers= =3D3,tcp<br>>     > progress:/media/NfsProgress<br>> &nb= sp;   /rhev/data-center/mnt/progress.brusselsairport.aero<br>> &nbs= p;   <http://progress.brusselsairport.aero>\:_media_NfsProgress/= )<br>>     > :<br>>     > mount: external m= ount: argv[3] =3D "-v"<br>>     > mount: external mount: ar= gv[4] =3D "-o"<br>>     > mount: external mount: argv[5] = =3D "rw,vers=3D3,tcp"<br>>     > mount.nfs: timeout set for= Tue Dec 16 08:56:47 2014<br>>     > mount.nfs: trying text= -based options 'vers=3D3,tcp,addr=3D10.110.56.20'<br>>     &gt= ; mount.nfs: prog 100003, trying vers=3D3, prot=3D6<br>>     &= gt; mount.nfs: portmap query failed: RPC: Program not registered<br>> &n= bsp;   > mount.nfs: requested NFS version or transport protocol is = not<br>>     > supported<br>>     ><br>>=     ><br>>     > From vdsm.log:<br>> &nbsp= ;   > Thread-277::ERROR::2014-12-16<br>>     ><br>&= gt;     08:46:32,504::storageServer::211::Storage.StorageServer.M= ountConnection::(connect)<br>>     Mount failed: (32, ';mount.= nfs: requested NFS version or transport<br>>     protocol is n= ot supported\n')<br>>     > Traceback (most recent call las= t):<br>>     >   File "/usr/share/vdsm/storage/storage= Server.py", line 209, in<br>>     > connect<br>>   =   >     self._mount.mount(self.options, self._vfsType)<br= >>     >   File "/usr/share/vdsm/storage/mount.py", li= ne 223, in mount<br>>     >     return self._runc= md(cmd, timeout)<br>>     >   File "/usr/share/vdsm/st= orage/mount.py", line 239, in _runcmd<br>>     >   &nb= sp; raise MountError(rc, ";".join((out, err)))<br>>     > M= ountError: (32, ';mount.nfs: requested NFS version or transport<br>> &nb= sp;   > protocol is not supported\n')<br>>     > Th= read-277::ERROR::2014-12-16<br>>     > 08:46:32,508::hsm::2= 433::Storage.HSM::(connectStorageServer)<br>>     Could not<br= >>     > connect to storageServer<br>>     &gt= ; Traceback (most recent call last):<br>>     >   File= "/usr/share/vdsm/storage/hsm.py", line 2430, in<br>>     >= connectStorageServer<br>>     >     conObj.conne= ct()<br>>     >   File "/usr/share/vdsm/storage/storag= eServer.py", line 328, in<br>>     > connect<br>>  =   >     return self._mountCon.connect()<br>>   &= nbsp; >   File "/usr/share/vdsm/storage/storageServer.py", line 217= , in<br>>     > connect<br>>     >   &= nbsp; raise e<br>>     > MountError: (32, ';mount.nfs: requ= ested NFS version or transport<br>>     > protocol is not s= upported\n')<br>>     ><br>>     ><br>> =     > Any ideas? The rest (4 others) didn't have any problems.= ..<br>>     ><br>>     ><br>>   &nb= sp; > plain text document attachment (ATT00001)<br>>     &g= t; _______________________________________________<br>>     &g= t; Users mailing list<br>>     > Users(a)ovirt.org <mailto= :Users@ovirt.org><br>>     > http://lists.ovirt.org/mail= man/listinfo/users<br>><br>>     # yum install -y nfs-utils= <br>><br>>     ?<br>><br>><br>><br>>   &nb= sp; --<br>><br>>     Med V?nliga H?lsningar<br>><br>>=     ------------------------------------------------------------= -------------------<br>>     Karli Sj?berg<br>>   &nbs= p; Swedish University of Agricultural Sciences Box 7079 (Visiting Address<b= r>>     Kron?sv?gen 8)<br>>     S-750 07 Uppsala,= Sweden<br>>     Phone:  +46-(0)18-67 15 66 <tel:%2B46= -%280%2918-67%2015%2066><br>>     karli.sjoberg(a)slu.se <= mailto:karli.sjoberg@slu.se><br>><br>><br>><br>> ___________= ____________________________________<br>> Users mailing list<br>> Use= rs(a)ovirt.org<br>> http://lists.ovirt.org/mailman/listinfo/users<br><div>= <br></div>-------------- next part --------------<br>An HTML attachment was= scrubbed...<br>URL: <http://lists.ovirt.org/pipermail/users/attachments= /20141216/6fbaaec0/attachment.html><br><div><br></div>------------------= ------------<br><div><br></div>____________________________________________= ___<br>Users mailing list<br>Users(a)ovirt.org<br>http://lists.ovirt.org/mail= man/listinfo/users<br><div><br></div><br>End of Users Digest, Vol 39, Issue= 96<br>*************************************<br></div><div><br></div></div>= </body></html> ------=_Part_10836963_1058080440.1418737821013--

1 0

NFS
by Koen Vanoppen 16 Dec '14

16 Dec '14

Dear all, We recently added 2 hypervisors to the domain on ovirt, but for some reason they can't connect to the nfs share: When I manually try to mount the nfs-share ([root@ovirthyp01dev ~]# mount -vvv -t nfs -o vers=3,tcp progress:/media/NfsProgress /rhev/data-center/mnt/ progress.brusselsairport.aero\:_media_NfsProgress/) : mount: external mount: argv[3] = "-v" mount: external mount: argv[4] = "-o" mount: external mount: argv[5] = "rw,vers=3,tcp" mount.nfs: timeout set for Tue Dec 16 08:56:47 2014 mount.nfs: trying text-based options 'vers=3,tcp,addr=10.110.56.20' mount.nfs: prog 100003, trying vers=3, prot=6 mount.nfs: portmap query failed: RPC: Program not registered mount.nfs: requested NFS version or transport protocol is not supported >From vdsm.log: Thread-277::ERROR::2014-12-16 08:46:32,504::storageServer::211::Storage.StorageServer.MountConnection::(connect) Mount failed: (32, ';mount.nfs: requested NFS version or transport protocol is not supported\n') Traceback (most recent call last): File "/usr/share/vdsm/storage/storageServer.py", line 209, in connect self._mount.mount(self.options, self._vfsType) File "/usr/share/vdsm/storage/mount.py", line 223, in mount return self._runcmd(cmd, timeout) File "/usr/share/vdsm/storage/mount.py", line 239, in _runcmd raise MountError(rc, ";".join((out, err))) MountError: (32, ';mount.nfs: requested NFS version or transport protocol is not supported\n') Thread-277::ERROR::2014-12-16 08:46:32,508::hsm::2433::Storage.HSM::(connectStorageServer) Could not connect to storageServer Traceback (most recent call last): File "/usr/share/vdsm/storage/hsm.py", line 2430, in connectStorageServer conObj.connect() File "/usr/share/vdsm/storage/storageServer.py", line 328, in connect return self._mountCon.connect() File "/usr/share/vdsm/storage/storageServer.py", line 217, in connect raise e MountError: (32, ';mount.nfs: requested NFS version or transport protocol is not supported\n') Any ideas? The rest (4 others) didn't have any problems...

4 6

Re: [ovirt-users] bash: ./autogen.sh: No such file or directory
by Yeela Kaplan 16 Dec '14

16 Dec '14

yum install make autoconf automake pyflakes logrotate gcc python-pep8 libvirt-python python-devel \ python-nose rpm-build sanlock-python genisoimage python-ordereddict python-pthreading libselinux-python\ python-ethtool m2crypto python-dmidecode python-netaddr python-inotify python-argparse git \ python-cpopen bridge-utils libguestfs-tools-c pyparted openssl libnl3 libtool gettext-devel python-ioprocess \ policycoreutils-python python-simplejson ----- Original Message ----- > From: "Ilan Hirsfeld" <ilan.hirsfeld(a)gmail.com> > To: "Yedidyah Bar David" <didi(a)redhat.com> > Cc: "Yeela Kaplan" <ykaplan(a)redhat.com> > Sent: Monday, December 15, 2014 5:39:13 PM > Subject: Re: [ovirt-users] bash: ./autogen.sh: No such file or directory > > [root@localhost Desktop]# pwd > /home/bih016/Desktop > [root@localhost Desktop]# cd vdsm > [root@localhost vdsm]# ./autogen.sh --system > ./autogen.sh: line 3: autoreconf: command not found > Running ./configure with --prefix=/usr --sysconfdir=/etc > --localstatedir=/var --libdir=/usr/lib64 > ./autogen.sh: line 26: ./configure: No such file or directory > Regards, > Ilan. > > On Mon, Dec 15, 2014 at 5:35 PM, Yedidyah Bar David <didi(a)redhat.com> wrote: > > > > ----- Original Message ----- > > > From: "Ilan Hirsfeld" <ilan.hirsfeld(a)gmail.com> > > > To: "Yeela Kaplan" <ykaplan(a)redhat.com>, didi(a)redhat.com > > > Sent: Monday, December 15, 2014 5:31:12 PM > > > Subject: Re: [ovirt-users] bash: ./autogen.sh: No such file or directory > > > > > > On Mon, Dec 15, 2014 at 5:29 PM, Ilan Hirsfeld <ilan.hirsfeld(a)gmail.com> > > > wrote: > > > > > > > > Hi, > > > > > > > > The OS is: > > > > [root@localhost Desktop]# cat /etc/redhat-release > > > > CentOS Linux release 7.0.1406 (Core) > > > > [root@localhost Desktop]# uname -r > > > > 3.10.0-123.13.1.el7.x86_64 > > > > [root@localhost Desktop]# rpm -qa | grep release > > > > ovirt-release35-001-0.5.rc2.noarch > > > > centos-release-7-0.1406.el7.centos.2.5.x86_64 > > > > > > > > [root@localhost Desktop]# pwd > > > > /home/bih016/Desktop > > > > > > > > I follow the instructions on the site > > http://www.ovirt.org/Vdsm_Developers > > > > : > > > > > > > > *http://www.ovirt.org/Vdsm_Developers#Installing_the_required_packages > > > > <http://www.ovirt.org/Vdsm_Developers#Installing_the_required_packages > > >* > > > > > > > > 1. yum install > > > > http://resources.ovirt.org/releases/ovirt-release/ovirt-release35.rpm > > > > > > > > 2. rpm -q wget 2> /dev/null || yum install wget > > > > wget -O /etc/yum.repos.d/glusterfs-epel.repo > > > > > > http://download.gluster.org/pub/gluster/glusterfs/LATEST/EPEL.repo/glusterf… > > > > > > > > *http://www.ovirt.org/Vdsm_Developers#Getting_the_source > > > > <http://www.ovirt.org/Vdsm_Developers#Getting_the_source>:* > > > > git clone http://gerrit.ovirt.org/p/vdsm.git > > > > > > > > *http://www.ovirt.org/Vdsm_Developers#Building_a_VDSM_RPM > > > > <http://www.ovirt.org/Vdsm_Developers#Building_a_VDSM_RPM>:* > > > > [root@localhost Desktop]# ./autogen.sh --system > > > > bash: ./autogen.sh: No such file or directory > > > > > > > > Regards, > > > > Ilan. > > > > > > > > > > > > > > > > On Mon, Dec 15, 2014 at 5:07 PM, Yeela Kaplan <ykaplan(a)redhat.com> > > wrote: > > > >> > > > >> what is the directory you're running it from (pwd)? > > > >> You should be under vdsm. > > > > So you should follow Yeela's advice. > > > > > >> Try listing the files and see if the script autogen.sh is there. > > > >> > > > >> ----- Original Message ----- > > > >> > From: "Ilan Hirsfeld" <ilan.hirsfeld(a)gmail.com> > > > >> > To: "users" <users(a)ovirt.org> > > > >> > Sent: Monday, December 15, 2014 4:54:52 PM > > > >> > Subject: [ovirt-users] bash: ./autogen.sh: No such file or directory > > > >> > > > > >> > Hi, > > > >> > I'm trying to do a Building a VDSM RPM and in command line I type > > the > > > >> > following: > > > >> > ./autogen.sh --system > > > >> > bash: ./autogen.sh: No such file or directory > > > >> > Can anybody help what was wrong? > > > >> > Any help will be blessed. > > > >> > Regards, > > > >> > Ilan. > > > >> > > > > >> > _______________________________________________ > > > >> > Users mailing list > > > >> > Users(a)ovirt.org > > > >> > http://lists.ovirt.org/mailman/listinfo/users > > > >> > > > > >> > > > > > > > > > > > -- > > Didi > > > > >

4 4

Problem after update ovirt to 3.5 (Juan Jose)
by Nikolai Sednev 16 Dec '14

16 Dec '14

------=_Part_10317007_2024199731.1418650214305 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Hi Juan, Looks like a bug connected to NFS mount, can you supply VDSM and libvirt logs? Was NFS share active and up after upgrade? Was all of your hosts at the same host cluster at the same VDSM version at 3.5 after engine was upgraded to 3.5? Thanks in advance. Best regards, Nikolai ____________________ Nikolai Sednev Senior Quality Engineer at Compute team Red Hat Israel 34 Jerusalem Road, Ra'anana, Israel 43501 Tel: +972 9 7692043 Mobile: +972 52 7342734 Email: nsednev(a)redhat.com IRC: nsednev ----- Original Message ----- From: users-request(a)ovirt.org To: users(a)ovirt.org Sent: Monday, December 15, 2014 3:21:58 PM Subject: Users Digest, Vol 39, Issue 82 Send Users mailing list submissions to users(a)ovirt.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.ovirt.org/mailman/listinfo/users or, via email, send a message with subject or body 'help' to users-request(a)ovirt.org You can reach the person managing the list at users-owner(a)ovirt.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Users digest..." Today's Topics: 1. Problem after update ovirt to 3.5 (Juan Jose) ---------------------------------------------------------------------- Message: 1 Date: Mon, 15 Dec 2014 14:17:15 +0100 From: Juan Jose <jj197005(a)gmail.com> To: "users(a)ovirt.org" <users(a)ovirt.org> Subject: [ovirt-users] Problem after update ovirt to 3.5 Message-ID: <CADrE9wbepEG3xU8B0ANS8JuTouiVJ8mC5BSdBD6Q16uKfW4eHA(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Hello everybody, After upgrade my engine to oVirt 3.5, I have also upgraded one of my hosts to oVirt 3.5. After that it seems that all have gone good aparently. But in some seconds my ISO domain is desconnected and it is impossible to Activate. I'm attaching my engine.log. The below error is showed each time I try to Activate the ISO domain. Before the upgrade it was working without problems: 2014-12-15 13:25:07,607 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-8-thread-5) [460733dd] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: Failed to connect Host host1 to the Storage Domains ISO_DOMAIN. 2014-12-15 13:25:07,608 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ConnectStorageServerVDSCommand] (org.ovirt.thread.pool-8-thread-5) [460733dd] FINISH, ConnectStorageServerVDSCommand, return: {81c0a853-715c-4478-a812-6a74808fc482=477}, log id: 3590969e 2014-12-15 13:25:07,615 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-8-thread-5) [460733dd] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: The error message for connection ovirt-engine.siee.local:/var/lib/exports/iso-20140303082312 returned by VDSM was: Problem while trying to mount target 2014-12-15 13:25:07,616 ERROR [org.ovirt.engine.core.bll.storage.NFSStorageHelper] (org.ovirt.thread.pool-8-thread-5) [460733dd] The connection with details ovirt-engine.siee.local:/var/lib/exports/iso-20140303082312 failed because of error code 477 and error message is: problem while trying to mount target If any other information is required, please tell me. Many thanks in advanced, Juanjo. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.ovirt.org/pipermail/users/attachments/20141215/c90d6bc1/attach…> -------------- next part -------------- A non-text attachment was scrubbed... Name: engine.log Type: text/x-log Size: 2594755 bytes Desc: not available URL: <http://lists.ovirt.org/pipermail/users/attachments/20141215/c90d6bc1/attach…> ------------------------------ _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users End of Users Digest, Vol 39, Issue 82 ************************************* ------=_Part_10317007_2024199731.1418650214305 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"font-family: georgia,serif; font-size: 12pt; colo= r: #000000"><div>Hi Juan,</div><div>Looks like a bug connected to NFS mount= , can you supply VDSM and libvirt logs?</div><div>Was NFS share active and = up after upgrade?</div><div>Was all of your hosts at the same host cluster = at the same VDSM version at 3.5 after engine was upgraded to 3.5?</div><div= ><br></div><div><span name=3D"x"></span><br>Thanks in advance.<br><div><br>= </div>Best regards,<br>Nikolai<br>____________________<br>Nikolai Sednev<br= >Senior Quality Engineer at Compute team<br>Red Hat Israel<br>34 Jerusalem = Road,<br>Ra'anana, Israel 43501<br><div><br></div>Tel:      = +972   9 7692043<br>Mobile: +972 52 7342734<br>Email: nsednev(a)redhat.= com<br>IRC: nsednev<span name=3D"x"></span><br></div><div><br></div><hr id= =3D"zwchr"><div style=3D"color:#000;font-weight:normal;font-style:normal;te= xt-decoration:none;font-family:Helvetica,Arial,sans-serif;font-size:12pt;">= <b>From: </b>users-request(a)ovirt.org<br><b>To: </b>users(a)ovirt.org<br><b>Se= nt: </b>Monday, December 15, 2014 3:21:58 PM<br><b>Subject: </b>Users Diges= t, Vol 39, Issue 82<br><div><br></div>Send Users mailing list submissions t= o<br>        users(a)ovirt.org<br><di= v><br></div>To subscribe or unsubscribe via the World Wide Web, visit<br>&n= bsp;       http://lists.ovirt.org/mailma= n/listinfo/users<br>or, via email, send a message with subject or body 'hel= p' to<br>        users-request@ovir= t.org<br><div><br></div>You can reach the person managing the list at<br>&n= bsp;       users-owner(a)ovirt.org<br><div= ><br></div>When replying, please edit your Subject line so it is more speci= fic<br>than "Re: Contents of Users digest..."<br><div><br></div><br>Today's= Topics:<br><div><br></div>   1.  Problem after update ovirt= to 3.5 (Juan Jose)<br><div><br></div><br>---------------------------------= -------------------------------------<br><div><br></div>Message: 1<br>Date:= Mon, 15 Dec 2014 14:17:15 +0100<br>From: Juan Jose <jj197005(a)gmail.com&= gt;<br>To: "users(a)ovirt.org" <users(a)ovirt.org><br>Subject: [ovirt-use= rs] Problem after update ovirt to 3.5<br>Message-ID:<br>   &= nbsp;    <CADrE9wbepEG3xU8B0ANS8JuTouiVJ8mC5BSdBD6Q1= 6uKfW4eHA(a)mail.gmail.com><br>Content-Type: text/plain; charset=3D"utf-8"= <br><div><br></div>Hello everybody,<br><div><br></div>After upgrade my engi= ne to oVirt 3.5, I have also upgraded one of my hosts<br>to oVirt 3.5. Afte= r that it seems that all have gone good aparently.<br><div><br></div>But in= some seconds my ISO domain is desconnected and it is impossible to<br>Acti= vate. I'm attaching my engine.log. The below error is showed each time<br>I= try to Activate the ISO domain. Before the upgrade it was working without<= br>problems:<br><div><br></div>2014-12-15 13:25:07,607 ERROR<br>[org.ovirt.= engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]<br>(org.ovirt.t= hread.pool-8-thread-5) [460733dd] Correlation ID: null, Call<br>Stack: null= , Custom Event ID: -1, Message: Failed to connect Host host1 to<br>the Stor= age Domains ISO_DOMAIN.<br>2014-12-15 13:25:07,608 INFO<br>[org.ovirt.engin= e.core.vdsbroker.vdsbroker.ConnectStorageServerVDSCommand]<br>(org.ovirt.th= read.pool-8-thread-5) [460733dd] FINISH,<br>ConnectStorageServerVDSCommand,= return:<br>{81c0a853-715c-4478-a812-6a74808fc482=3D477}, log id: 3590969e<= br>2014-12-15 13:25:07,615 ERROR<br>[org.ovirt.engine.core.dal.dbbroker.aud= itloghandling.AuditLogDirector]<br>(org.ovirt.thread.pool-8-thread-5) [4607= 33dd] Correlation ID: null, Call<br>Stack: null, Custom Event ID: -1, Messa= ge: The error message for connection<br>ovirt-engine.siee.local:/var/lib/ex= ports/iso-20140303082312 returned by<br>VDSM was: Problem while trying to m= ount target<br>2014-12-15 13:25:07,616 ERROR<br>[org.ovirt.engine.core.bll.= storage.NFSStorageHelper]<br>(org.ovirt.thread.pool-8-thread-5) [460733dd] = The connection with details<br>ovirt-engine.siee.local:/var/lib/exports/iso= -20140303082312 failed because<br>of error code 477 and error message is: p= roblem while trying to mount target<br><div><br></div>If any other informat= ion is required, please tell me.<br><div><br></div>Many thanks in advanced,= <br><div><br></div>Juanjo.<br>-------------- next part --------------<br>An= HTML attachment was scrubbed...<br>URL: <http://lists.ovirt.org/piperma= il/users/attachments/20141215/c90d6bc1/attachment.html><br>-------------= - next part --------------<br>A non-text attachment was scrubbed...<br>Name= : engine.log<br>Type: text/x-log<br>Size: 2594755 bytes<br>Desc: not availa= ble<br>URL: <http://lists.ovirt.org/pipermail/users/attachments/20141215= /c90d6bc1/attachment.bin><br><div><br></div>----------------------------= --<br><div><br></div>_______________________________________________<br>Use= rs mailing list<br>Users(a)ovirt.org<br>http://lists.ovirt.org/mailman/listin= fo/users<br><div><br></div><br>End of Users Digest, Vol 39, Issue 82<br>***= **********************************<br></div><div><br></div></div></body></h= tml> ------=_Part_10317007_2024199731.1418650214305--

2 2

Re: [ovirt-users] Don't start vm
by Roman Nikolayevich Drovalev 16 Dec '14

16 Dec '14

Ýòî ñîîáùåíèå èç íåñêîëüêèõ ÷àñòåé â ôîðìàòå MIME. --=_alternative 00406F2D43257DB0_= Content-Type: text/plain; charset="US-ASCII" Hi, > > > > Hi, > > answer below > > > > > > Nir Soffer <nsoffer(a)redhat.com> > > > > > > > > > > Hi, > > > > > > > > > > > > I attach the file. Below log in the vdsm.log.62.xz > > > > > > > > > > > > The given nonexistent disk has probably appeared after template > > > > removal > > > > > > from which it has been created. > > > > > > BUT it was independent and before problems was not, after template > > > > > > removal! > > > > > > The disk exists, but at it has changed ID! > > > > > > > > > > I don't understand this description. > > > > > > > > > > Can you describe to steps to reproduce this issue? > > > > > > > > > > Guessing from your description: > > > > > 1. Create vm with x disks > > > > > 2. Create template > > > > > 3. Create vm from template > > > > > 4. Remove template > > > > > ? > > > > > > > > Yes. > > > > 1. Create vm with x disks on the DS 3524 through FC (multipathd on > > vdsm) > > > > 2. Create template > > > > 3. Create vm (independent) from template > > > > 4. Start vm and job in the vm > > > > 5. Remove template > > > > 6. Stop vm > > > > 7. Don`t start vm with error > > > > > > Do you mean - start vm fail with error about missing lv? > Yes > > > > > > > > 8. seek it disk - #lsblk > > > > > > Can you share the output of lsblk both before and after you stop the vm? No, since vm does not start! > > > > > > > > 9. many command with block 253:20 > > > > > > Not sure what do you mean by that > > You did not explain what you mean Hm, ?? vgchange .... > > > > Note: do *not* activate all lvs using "vgchange -a y" > > > Only vdsm should activate its volumes. > > > > OK! If vm don`t start, how to take data from vm? > > Of course if you need to troubshoot the system, and the vm is not > running, there is no problem to access the lv directly. > > Even then, you should *not* activate all lvs in a vg using > > vgchange -a y > > But activate only the lv you want to access using > > lvchange -a y Thank you, did not know > > > > > > > > > > 10. mount finded lvm in lvm volume and save data > > > > > > Mount? how mount is related to lvm? > > > > VM disk is lv on vdsm. I mounted lv, inside lvm on lv vdsm! > > You mean you activate the lv on the host? Yes, intro LVM vdsm > > > > > 12. reboot all vdsm host > > > > 13. dont't find ID it disk! ID it disk changed! > > > > > > Please share output of lvs both before and after the vm is stopped. > > > > Before > > -/dev/9d53ecef-8bfc-470b-8867-836bfa7df137/ > fb8466c9-0867-4e73-8362-2c95eea89a83 > > After - > > /dev/9d53ecef-8bfc-470b-8867-836bfa7df137/33b905e2-23df-49a9- > b772-4ebda3b0cd22 > > This not the output of lvs, these are the symlinks to the active lvs. > > Can you share the lvs output before and after the vm is stopped? No, since the vm does not start! > > > > > Now the problem disk has again received old ID(lvdisplay), BUT I have > > already removed it! > > I'm not sure what you mean. Can you share the output of lvdisplay before > and after the operation? > Already is not present, I have removed this problem disk > > > > The Mysticism! > > > > At me 3 disks on 9 GB, 5 days ago I have removed them. Now I them see till > > now (lvdisplay on the vdsm host) Why? > > Did you update lvm cache using "pvscan --cache"? No. I should after each operation with disks, do in the console "pvscan - cache"? > > > > > In general my problem has begun that on Windows 2008 Vm the empty seat has > > come to an end. > > What do you mean by that? This is first problem! Second problem - don't start the vm. > > > I have expanded volume in web gui. When I began to expand > > a disk in VM - error. > > > lvdisplay on the vdsm host has shown the old size of > > a disk! > > Is the volume preallocated or thin provisioned? All my disks - prelocated. > > Preallocated volumes are extended when you modify the volume size in > engine ui (as you described). Thin provisioned volumes are extended > only when the available space is bellow a threshold, so the lv > size will not change after you modify the volume size. > > > > > Sometimes normally all works! > > Do you mean that now everything works? The VM it has been removed, since for a week I could not start it! Now all works on others VM. But there were 2 problems! My problem to understand, that I have made not so or it is a problem oVirt. I wish to use oVirt, but is not assured of it because of these problems! > > > > > How I understand, probably, "all ok" when you work with VM which are on > > SPM host??! > > Lost you here. It agree, a head around )) Thanks Roma --=_alternative 00406F2D43257DB0_= Content-Type: text/html; charset="US-ASCII" <font size=2 face="sans-serif">Hi, </font> <br> <br><tt><font size=2><br> > > <br> > > Hi,<br> > > answer below<br> > > <br> > > > > Nir Soffer <nsoffer(a)redhat.com><br> > > > > <br> > > > > > > Hi,<br> > > > > > > <br> > > > > > > I attach the file. Below log in the vdsm.log.62.xz<br> > > > > > > <br> > > > > > > The given nonexistent disk has probably appeared after template<br> > > > > removal<br> > > > > > > from which it has been created.<br> > > > > > > BUT it was independent and before problems was not, after template<br> > > > > > > removal!<br> > > > > > > The disk exists, but at it has changed ID!<br> > > > > > <br> > > > > > I don't understand this description.<br> > > > > > <br> > > > > > Can you describe to steps to reproduce this issue?<br> > > > > > <br> > > > > > Guessing from your description:<br> > > > > > 1. Create vm with x disks<br> > > > > > 2. Create template<br> > > > > > 3. Create vm from template<br> > > > > > 4. Remove template<br> > > > > > ?<br> > > > > <br> > > > > Yes.<br> > > > > 1. Create vm with x disks on the DS 3524 through FC (multipathd on<br> > > vdsm)<br> > > > > 2. Create template<br> > > > > 3. Create vm (independent) from template<br> > > > > 4. Start vm and job in the vm<br> > > > > 5. Remove template<br> > > > > 6. Stop vm<br> > > > > 7. Don`t start vm with error<br> > > > <br> > > > Do you mean - start vm fail with error about missing lv?<br> > <br> </font></tt> <br><tt><font size=2>Yes</font></tt> <br> <br> <br><tt><font size=2> <br> > <br> > > > <br> > > > > 8. seek it disk - #lsblk<br> > > > <br> > > > Can you share the output of lsblk both before and after you stop the vm?</font></tt> <br> <br><tt><font size=2>No,  since vm does not start!</font></tt> <br> <br><tt><font size=2><br> > <br> > > > <br> > > > > 9. many command with block 253:20<br> > > > <br> > > > Not sure what do you mean by that<br> > <br> > You did not explain what you mean</font></tt> <br> <br><tt><font size=2>Hm, ?? vgchange ....</font></tt> <br><tt><font size=2><br> > <br> > > > Note: do *not* activate all lvs using "vgchange -a y"<br> > > > Only vdsm should activate its volumes.<br> > > <br> > > OK! If vm don`t start, how to take data from vm?<br> > <br> > Of course if you need to troubshoot the system, and the vm is not<br> > running, there is no problem to access the lv directly.<br> > <br> > Even then, you should *not* activate all lvs in a vg using <br> > <br> >     vgchange -a y<br> > <br> > But activate only the lv you want to access using<br> > <br> >     lvchange -a y</font></tt> <br> <br><tt><font size=2>Thank you, did not know</font></tt> <br><tt><font size=2><br> > <br> > > <br> > > > <br> > > > > 10. mount finded  lvm in lvm volume and save data<br> > > > <br> > > > Mount? how mount is related to lvm?<br> > > <br> > > VM disk is lv on vdsm. I mounted lv, inside lvm on lv vdsm!<br> > <br> > You mean you activate the lv on the host?</font></tt> <br> <br><tt><font size=2>Yes, intro LVM vdsm</font></tt> <br> <br><tt><font size=2><br> > <br> > > > > 12. reboot all vdsm host<br> > > > > 13. dont't find ID it disk! ID it disk changed!<br> > > > <br> > > > Please share output of lvs both before and after the vm is stopped.<br> > > <br> > > Before<br> > > -/dev/9d53ecef-8bfc-470b-8867-836bfa7df137/<br> > fb8466c9-0867-4e73-8362-2c95eea89a83<br> > > After   -<br> > > /dev/9d53ecef-8bfc-470b-8867-836bfa7df137/33b905e2-23df-49a9-<br> > b772-4ebda3b0cd22<br> > <br> > This not the output of lvs, these are the symlinks to the active lvs.<br> > <br> > Can you share the lvs output before and after the vm is stopped?</font></tt> <br> <br> <br><tt><font size=2>No,  since the vm does not start!</font></tt> <br><tt><font size=2><br> > <br> > > <br> > > Now the problem disk has again received old ID(lvdisplay), BUT I have<br> > > already removed it!<br> > <br> > I'm not sure what you mean. Can you share the output of lvdisplay before<br> > and after the operation?<br> > </font></tt> <br> <br><tt><font size=2>Already is not present, I have removed this problem disk</font></tt> <br> <br><tt><font size=2><br> > > <br> > > The Mysticism!<br> > > <br> > > At me 3 disks on 9 GB, 5 days ago I have removed them. Now I them see till<br> > > now (lvdisplay on the vdsm host) Why?<br> > <br> > Did you update lvm cache using "pvscan --cache"?</font></tt> <br> <br><tt><font size=2>No. I should after each operation with disks, do in the console "pvscan - cache"?</font></tt> <br> <br><tt><font size=2><br> > <br> > > <br> > > In general my problem has begun that on Windows 2008 Vm the empty seat has<br> > > come to an end.<br> > <br> > What do you mean by that?</font></tt> <br> <br><tt><font size=2>This is first problem! Second problem - don't start the vm. </font></tt> <br><tt><font size=2><br> > <br> > > I have expanded volume in web gui. When I began to expand<br> > > a disk in VM - error.<br> > <br> > > lvdisplay on the vdsm host has shown the old size of<br> > > a disk!<br> > <br> > Is the volume preallocated or thin provisioned?</font></tt> <br> <br><tt><font size=2>All my disks - prelocated.</font></tt> <br><tt><font size=2><br> > <br> > Preallocated volumes are extended when you modify the volume size in<br> > engine ui (as you described). Thin provisioned volumes are extended<br> > only when the available space is bellow a threshold, so the lv<br> > size will not change after you modify the volume size.<br> > <br> > > <br> > > Sometimes normally all works!<br> > <br> > Do you mean that now everything works?</font></tt> <br> <br> <br><tt><font size=2>The VM it has been removed, since for a week I could not start it!</font></tt> <br> <br><tt><font size=2>Now all works on others VM. But there were 2 problems! My problem to understand, that I have made not so or it is a problem oVirt. </font></tt> <br><tt><font size=2>I wish to use oVirt, but is not assured of it because of these problems!</font></tt> <br><tt><font size=2><br> > <br> > > <br> > > How I understand, probably, "all ok" when you work with VM which are on<br> > > SPM host??!<br> > <br> > Lost you here.<br> </font></tt> <br><tt><font size=2>It agree, a head around ))</font></tt> <br> <br> <br><tt><font size=2>Thanks</font></tt> <br> <br><tt><font size=2>Roma<br> </font></tt> --=_alternative 00406F2D43257DB0_=--

1 0

Installtion fail for Ovirt engine in CentOS 6.5
by Yue, Cong 15 Dec '14

15 Dec '14

--_000_ED08B56256B38842A463A2A0804C5AC0326ACA3ACAsvrcaexch1atg_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi I am trying to install Ovirt engine into centOS6.5 according to the manual = as folows: http://www.ovirt.org/Quick_Start_Guide#Install_oVirt_Engine_.28Fedora_.2F_R= ed_Hat_Enterprise_Linux_.2F_CentOS.29 I met one error during engine-setup, the message is as follows: ---- [root@ovirt-mgmnt user1]# engine-setup [ INFO ] Stage: Initializing [ INFO ] Stage: Environment setup Configuration files: ['/etc/ovirt-engine-setup.conf.d/10-packaging-jboss.conf', '/etc/ovirt-engine-setup.conf.d/10-packaging.conf'] Log file: /var/log/ovirt-engine/setup/ovirt-engine-setup-20141215113915-w7bbrh.log Version: otopi-1.3.0 (otopi-1.3.0-1.el6) [ INFO ] Stage: Environ= ment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: En= vironment setup [ INFO ] Stage: Environment customization --=3D=3D PRODUCT OPTIONS =3D=3D-- Configure Engine on this host (Yes, No) [Yes]: Configure WebSocket Proxy on this host (Yes, No) [Yes]: --=3D=3D PACKAGES =3D=3D-- [ INFO ] Checking for product updates... [ INFO ] No product updates found --=3D=3D ALL IN ONE CONFIGURATION =3D=3D-- --=3D=3D NETWORK CONFIGURATION =3D=3D-- Setup can automatically configure the firewall on this system. Note: automatic configuration of the firewall may overwrite curre= nt settings. Do you want Setup to configure the firewall? (Yes, No) [Yes]: [ INFO ] iptables will be configured as firewall manager. Host fully qualified DNS name of this server [ovirt-mgmnt]: [WARNING] Host name ovirt-mgmnt has no domain suffix [WARNING] Failed to re= solve ovirt-mgmnt using DNS, it can be resolved only locally --=3D=3D DATABASE CONFIGURATION =3D=3D-- Where is the Engine database located? (Local, Remote) [Local]: Setup can configure the local postgresql server automatically for= the engine to run. This may conflict with existing applications. Would you like Setup to automatically configure postgresql and cr= eate Engine database, or prefer to perform that manually? (Automatic, Manual) [Automatic]: --=3D=3D OVIRT ENGINE CONFIGURATION =3D=3D-- Engine admin password: Confirm engine admin password: [WARNING] Password is weak: it is based on a dictionary word Use weak password? (Yes, No) [No]: Yes Application mode (Both, Virt, Gluster) [Both]: --=3D=3D PKI CONFIGURATION =3D=3D-- Organization name for certificate [Test]: --=3D=3D APACHE CONFIGURATION =3D=3D-- Setup can configure the default page of the web server to present= the application home page. This may conflict with existing applications. Do you wish to set the application as the default page of the web= server? (Yes, No) [Yes]: Setup can configure apache to use SSL using a certificate issued = from the internal CA. Do you wish Setup to configure that, or prefer to perform that ma= nually? (Automatic, Manual) [Automatic]: --=3D=3D SYSTEM CONFIGURATION =3D=3D-- Configure an NFS share on this server to be used as an ISO Domain= ? (Yes, No) [Yes]: Local ISO domain path [/var/lib/exports/iso]: Local ISO domain ACL - note that the default will restrict access= to ovirt-mgmnt only, for security reasons [ovirt-mgmnt(rw)]: Local ISO domain name [ISO_DOMAIN]: --=3D=3D MISC CONFIGURATION =3D=3D-- --=3D=3D END OF CONFIGURATION =3D=3D-- [ INFO ] Stage: Setup validation [WARNING] Less than 16384MB of memory is available --=3D=3D CONFIGURATION PREVIEW =3D=3D-- Application mode : both Datacenter storage type : False Firewall manager : iptables Update Firewall : True Host FQDN : ovirt-mgmnt Engine database name : engine Engine database secured connection : False Engine database host : localhost Engine database user name : engine Engine database host name validation : False Engine database port : 5432 Engine installation : True NFS setup : True PKI organization : Test NFS mount point : /var/lib/exports/iso NFS export ACL : ovirt-mgmnt(rw) Configure local Engine database : True Set application as default page : True Configure Apache SSL : True Configure WebSocket Proxy : True Please confirm installation settings (OK, Cancel) [OK]: [ INFO ] Stage: Transaction setup [ INFO ] Stopping engine service [ INFO ] Stopping ovirt-fence-kdump-listener service [ INFO ] Stopping we= bsocket-proxy service [ INFO ] Stage: Misc configuration [ INFO ] Stage: = Package installation [ INFO ] Stage: Misc configuration [ INFO ] Creating= PostgreSQL 'engine' database [ ERROR ] Failed to execute stage 'Misc confi= guration': Command '/sbin/service' failed to execute [ INFO ] Yum Performi= ng yum transaction rollback [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20141215113915-w7bbrh.log [ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20141215114117-setup.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed ---- Do I need do more preparations before install ovirt engine? I am using ovir= t3.5 as the manual above advised. Thanks, Cong ________________________________ This e-mail message is for the sole use of the intended recipient(s) and ma= y contain confidential and privileged information. Any unauthorized review,= use, disclosure or distribution is prohibited. If you are not the intended= recipient, please contact the sender by reply e-mail and destroy all copie= s of the original message. If you are the intended recipient, please be adv= ised that the content of this message is subject to access, review and disc= losure by the sender's e-mail System Administrator. --_000_ED08B56256B38842A463A2A0804C5AC0326ACA3ACAsvrcaexch1atg_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 14 (filtered medium)"> <style></style> </head> <body lang=3D"EN-US" link=3D"blue" vlink=3D"purple"> <div class=3D"WordSection1"> <p class=3D"MsoNormal">Hi<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoPlainText">I am trying to install Ovirt engine into centOS6.= 5 according to the manual as folows:<o:p></o:p></p> <p class=3D"MsoPlainText"><a href=3D"http://www.ovirt.org/Quick_Start_Guide= #Install_oVirt_Engine_.28Fedora_.2F_Red_Hat_Enterprise_Linux_.2F_CentOS.29"= >http://www.ovirt.org/Quick_Start_Guide#Install_oVirt_Engine_.28Fedora_.2F_= Red_Hat_Enterprise_Linux_.2F_CentOS.29</a><o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">I met one error during engine-setup, the message = is as follows:<o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">----<o:p></o:p></p> <p class=3D"MsoPlainText">[root@ovirt-mgmnt user1]# engine-setup<o:p></o:p>= </p> <p class=3D"MsoPlainText">[ INFO  ] Stage: Initializing<o:p></o:p></p> <p class=3D"MsoPlainText">[ INFO  ] Stage: Environment setup<o:p></o:p= ></p> <p class=3D"MsoPlainText">        &= nbsp; Configuration files:<o:p></o:p></p> <p class=3D"MsoPlainText">['/etc/ovirt-engine-setup.conf.d/10-packaging-jbo= ss.conf',<o:p></o:p></p> <p class=3D"MsoPlainText">'/etc/ovirt-engine-setup.conf.d/10-packaging.conf= ']<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Log file:<o:p></o:p></p> <p class=3D"MsoPlainText">/var/log/ovirt-engine/setup/ovirt-engine-setup-20= 141215113915-w7bbrh.log<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Version: otopi-1.3.0 (otopi-1.3.0-1.el6) [ INFO  ] Stage: Enviro= nment packages setup [ INFO  ] Stage: Programs detection [ INFO  = ] Stage: Environment setup [ INFO  ] Stage: Environment customization<= o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">        &= nbsp; --=3D=3D PRODUCT OPTIONS =3D=3D--<o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Configure Engine on this host (Yes, No) [Yes]:<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Configure WebSocket Proxy on this host (Yes, No) [Yes]:<o:p></o:p></p= > <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">        &= nbsp; --=3D=3D PACKAGES =3D=3D--<o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">[ INFO  ] Checking for product updates...<o:= p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">[ INFO  ] No product updates found<o:p></o:p= ></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">        &= nbsp; --=3D=3D ALL IN ONE CONFIGURATION =3D=3D--<o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">        &= nbsp; --=3D=3D NETWORK CONFIGURATION =3D=3D--<o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Setup can automatically configure the firewall on this system.<o:p></= o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Note: automatic configuration of the firewall may overwrite current s= ettings.<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Do you want Setup to configure the firewall? (Yes, No)<o:p></o:p></p> <p class=3D"MsoPlainText">[Yes]: [ INFO  ] iptables will be configured= as firewall manager.<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Host fully qualified DNS name of this server [ovirt-mgmnt]:<o:p></o:p= ></p> <p class=3D"MsoPlainText">[WARNING] Host name ovirt-mgmnt has no domain suf= fix [WARNING] Failed to resolve ovirt-mgmnt using DNS, it can be resolved o= nly locally<o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">        &= nbsp; --=3D=3D DATABASE CONFIGURATION =3D=3D--<o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Where is the Engine database located? (Local, Remote) [Local]:<o:p></= o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Setup can configure the local postgresql server automatically for the= engine to run. This may conflict with existing applications.<o:p></o:p></p= > <p class=3D"MsoPlainText">        &= nbsp; Would you like Setup to automatically configure postgresql and create= Engine database, or prefer to perform that manually?<o:p></o:p></p> <p class=3D"MsoPlainText">(Automatic, Manual) [Automatic]:<o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">        &= nbsp; --=3D=3D OVIRT ENGINE CONFIGURATION =3D=3D--<o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Engine admin password:<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Confirm engine admin password:<o:p></o:p></p> <p class=3D"MsoPlainText">[WARNING] Password is weak: it is based on a dict= ionary word<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Use weak password? (Yes, No) [No]: Yes<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Application mode (Both, Virt, Gluster) [Both]:<o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">        &= nbsp; --=3D=3D PKI CONFIGURATION =3D=3D--<o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Organization name for certificate [Test]:<o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">        &= nbsp; --=3D=3D APACHE CONFIGURATION =3D=3D--<o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Setup can configure the default page of the web server to present the= application home page. This may conflict with existing applications.<o:p><= /o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Do you wish to set the application as the default page of the web ser= ver? (Yes, No) [Yes]:<o:p></o:p></p> <p class=3D"MsoPlainText">         =  Setup can configure apache to use SSL using a certificate issued from= the internal CA.<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Do you wish Setup to configure that, or prefer to perform that manual= ly? (Automatic, Manual) [Automatic]:<o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">        &= nbsp; --=3D=3D SYSTEM CONFIGURATION =3D=3D--<o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">         =  Configure an NFS share on this server to be used as an ISO Domain? (Y= es, No) [Yes]:<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Local ISO domain path [/var/lib/exports/iso]:<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Local ISO domain ACL - note that the default will restrict access to = ovirt-mgmnt only, for security reasons [ovirt-mgmnt(rw)]:<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Local ISO domain name [ISO_DOMAIN]:<o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">        &= nbsp; --=3D=3D MISC CONFIGURATION =3D=3D--<o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">        &= nbsp; --=3D=3D END OF CONFIGURATION =3D=3D--<o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">[ INFO  ] Stage: Setup validation<o:p></o:p>= </p> <p class=3D"MsoPlainText">[WARNING] Less than 16384MB of memory is availabl= e<o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">        &= nbsp; --=3D=3D CONFIGURATION PREVIEW =3D=3D--<o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Application mode        &nbsp= ;            &n= bsp;  : both<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Datacenter storage type       &nbs= p;         : False<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Firewall manager        &nbsp= ;            &n= bsp;  : iptables<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Update Firewall         =             &nb= sp;   : True<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Host FQDN          =             &nb= sp;        : ovirt-mgmnt<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Engine database name        &= nbsp;           : engine<= o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Engine database secured connection      : Fa= lse<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Engine database host        &= nbsp;           : localho= st<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Engine database user name       &n= bsp;       : engine<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Engine database host name validation    : False<o:p></= o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Engine database port        &= nbsp;           : 5432<o:= p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Engine installation         &= nbsp;           : Tr= ue<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; NFS setup          =             &nb= sp;        : True<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; PKI organization        &nbsp= ;            &n= bsp;  : Test<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; NFS mount point         =             &nb= sp;   : /var/lib/exports/iso<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; NFS export ACL         &= nbsp;           &nbs= p;    : ovirt-mgmnt(rw)<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Configure local Engine database      &n= bsp;  : True<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Set application as default page      &n= bsp;  : True<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Configure Apache SSL        &= nbsp;           : True<o:= p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Configure WebSocket Proxy       &n= bsp;       : True<o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">         =  Please confirm installation settings (OK, Cancel) [OK]:<o:p></o:p></p= > <p class=3D"MsoPlainText">[ INFO  ] Stage: Transaction setup<o:p></o:p= ></p> <p class=3D"MsoPlainText">[ INFO  ] Stopping engine service<o:p></o:p>= </p> <p class=3D"MsoPlainText">[ INFO  ] Stopping ovirt-fence-kdump-listene= r service [ INFO  ] Stopping websocket-proxy service [ INFO  ] St= age: Misc configuration [ INFO  ] Stage: Package installation [ INFO&n= bsp; ] Stage: Misc configuration [ INFO  ] Creating PostgreSQL 'engine' database [ ERROR ] Failed to execute stage 'Misc configuration': = Command '/sbin/service' failed to execute [ INFO  ] Yum Performing yum= transaction rollback [ INFO  ] Stage: Clean up<o:p></o:p></p> <p class=3D"MsoPlainText">        &= nbsp; Log file is located at<o:p></o:p></p> <p class=3D"MsoPlainText">/var/log/ovirt-engine/setup/ovirt-engine-setup-20= 141215113915-w7bbrh.log<o:p></o:p></p> <p class=3D"MsoPlainText">[ INFO  ] Generating answer file<o:p></o:p><= /p> <p class=3D"MsoPlainText">'/var/lib/ovirt-engine/setup/answers/201412151141= 17-setup.conf'<o:p></o:p></p> <p class=3D"MsoPlainText">[ INFO  ] Stage: Pre-termination<o:p></o:p><= /p> <p class=3D"MsoPlainText">[ INFO  ] Stage: Termination<o:p></o:p></p> <p class=3D"MsoPlainText">[ ERROR ] Execution of setup failed<o:p></o:p></p= > <p class=3D"MsoPlainText">----<o:p></o:p></p> <p class=3D"MsoPlainText"><o:p> </o:p></p> <p class=3D"MsoPlainText">Do I need do more preparations before install ovi= rt engine? I am using ovirt3.5 as the manual above advised.<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Thanks,<o:p></o:p></p> <p class=3D"MsoNormal">Cong<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> </div> <br> <hr> <font face=3D"Arial" color=3D"Gray" size=3D"1">This e-mail message is for t= he sole use of the intended recipient(s) and may contain confidential and p= rivileged information. Any unauthorized review, use, disclosure or distribu= tion is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy = all copies of the original message. If you are the intended recipient, plea= se be advised that the content of this message is subject to access, review= and disclosure by the sender's e-mail System Administrator.<br> </font> </body> </html> --_000_ED08B56256B38842A463A2A0804C5AC0326ACA3ACAsvrcaexch1atg_--

3 6

Re: [ovirt-users] oVirt Neutron integration question
by Andrew Brimer 15 Dec '14

15 Dec '14

This is a multi-part message in MIME format. ------_=_NextPart_001_01D018AB.ADA98816 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable This is the log information that I get when I hit the Test button on New External Provider. =20 =20 /var/log/ovirt-engine/engine.log =20 2014-12-15 20:37:09,865 INFO [org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand] (ajp--127.0.0.1-8702-8) [5ec3469f] Running command: TestProviderConnectivityCommand internal: false. Entities affected : ID: aaa00000-0000-0000-0000-123456789aaa Type: SystemAction group CREATE_STORAGE_POOL with role type ADMIN 2014-12-15 20:37:09,934 ERROR [org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand] (ajp--127.0.0.1-8702-8) [5ec3469f] Command org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand throw Vdc Bll exception. With error message VdcBLLException: (Failed with error PROVIDER_FAILURE and code 5050) =20 /var/log/ovirt-engine/server.log =20 2014-12-15 20:49:17,507 WARN [org.apache.http.impl.client.DefaultHttpClient] (ajp--127.0.0.1-8702-8) Authentication error: Unable to respond to any of these challenges: {keystone=3DWww-Authenticate: Keystone uri=3D"http://10.1.2.3:35357"} =20 =20 From: Andrew Brimer=20 Sent: Monday, December 15, 2014 3:02 PM To: Moti Asayag (masayag(a)redhat.com) Cc: users(a)ovirt.org Subject: oVirt Neutron integration question =20 Hi Moti, =20 I am progressing from the Neutron appliance to Neutron on bare metal and have some questions. I currently have a Fedora 20 blade for the RDO PackStack (Icehouse) that will become my Neutron node. =20 Are you able to provide the PackStack answers file and any other configuration details that went into the creation of the appliance?=20 =20 Thanks very much for any help that you could provide to this effort. =20 Kind Regards, =20 Andrew Brimer ------_=_NextPart_001_01D018AB.ADA98816 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" = xmlns:o=3D"urn:schemas-microsoft-com:office:office" = xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" = xmlns=3D"http://www.w3.org/TR/REC-html40"><head><META = HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = charset=3Dus-ascii"><meta name=3DGenerator content=3D"Microsoft Word 14 = (filtered medium)"><style></style></head><body lang=3DEN-US link=3Dblue = vlink=3Dpurple><div class=3DWordSection1><p class=3DMsoNormal><span = style=3D'color:#1F497D'>This is the log information that I get when I = hit the Test button on New External Provider.<o:p></o:p></span></p><p = class=3DMsoNormal><span = style=3D'color:#1F497D'><o:p> </o:p></span></p><p = class=3DMsoNormal><span = style=3D'color:#1F497D'><o:p> </o:p></span></p><p = class=3DMsoNormal><span = style=3D'color:#1F497D'>/var/log/ovirt-engine/engine.log<o:p></o:p></span= ></p><p class=3DMsoNormal><span = style=3D'color:#1F497D'><o:p> </o:p></span></p><p = class=3DMsoNormal><span style=3D'color:#1F497D'>2014-12-15 20:37:09,865 = INFO  = [org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand] = (ajp--127.0.0.1-8702-8) [5ec3469f] Running command: = TestProviderConnectivityCommand internal: false. Entities affected = :  ID: aaa00000-0000-0000-0000-123456789aaa Type: SystemAction = group CREATE_STORAGE_POOL with role type ADMIN<o:p></o:p></span></p><p = class=3DMsoNormal><span style=3D'color:#1F497D'>2014-12-15 20:37:09,934 = ERROR = [org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand] = (ajp--127.0.0.1-8702-8) [5ec3469f] Command = org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand throw = Vdc Bll exception. With error message VdcBLLException: (Failed with = error PROVIDER_FAILURE and code 5050)<o:p></o:p></span></p><p = class=3DMsoNormal><span = style=3D'color:#1F497D'><o:p> </o:p></span></p><p = class=3DMsoNormal><span = style=3D'color:#1F497D'>/var/log/ovirt-engine/server.log<o:p></o:p></span= ></p><p class=3DMsoNormal><span = style=3D'color:#1F497D'><o:p> </o:p></span></p><p = class=3DMsoNormal><span style=3D'color:#1F497D'>2014-12-15 20:49:17,507 = WARN  [org.apache.http.impl.client.DefaultHttpClient] = (ajp--127.0.0.1-8702-8) Authentication error: Unable to respond to any = of these challenges: {keystone=3DWww-Authenticate: Keystone = uri=3D"http://10.1.2.3:35357"}<o:p></o:p></span></p><p = class=3DMsoNormal><span = style=3D'color:#1F497D'><o:p> </o:p></span></p><p = class=3DMsoNormal><span = style=3D'color:#1F497D'><o:p> </o:p></span></p><div><div = style=3D'border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in = 0in 0in'><p class=3DMsoNormal><b><span = style=3D'font-size:10.0pt;font-family:"Tahoma","sans-serif"'>From:</span>= </b><span style=3D'font-size:10.0pt;font-family:"Tahoma","sans-serif"'> = Andrew Brimer <br><b>Sent:</b> Monday, December 15, 2014 3:02 = PM<br><b>To:</b> Moti Asayag (masayag(a)redhat.com)<br><b>Cc:</b> = users(a)ovirt.org<br><b>Subject:</b> oVirt Neutron integration = question<o:p></o:p></span></p></div></div><p = class=3DMsoNormal><o:p> </o:p></p><p class=3DMsoNormal>Hi = Moti,<o:p></o:p></p><p class=3DMsoNormal><o:p> </o:p></p><p = class=3DMsoNormal>I am progressing from the Neutron appliance to Neutron = on bare metal and have some questions. I currently have a Fedora 20 = blade for the RDO PackStack (Icehouse) that will become my Neutron = node.<o:p></o:p></p><p class=3DMsoNormal><o:p> </o:p></p><p = class=3DMsoNormal>Are you able to provide the PackStack answers file and = any other configuration details that went into the creation of the = appliance? <o:p></o:p></p><p class=3DMsoNormal><o:p> </o:p></p><p = class=3DMsoNormal>Thanks very much for any help that you could provide = to this effort.<o:p></o:p></p><p = class=3DMsoNormal><o:p> </o:p></p><p class=3DMsoNormal>Kind = Regards,<o:p></o:p></p><p class=3DMsoNormal><o:p> </o:p></p><p = class=3DMsoNormal>Andrew Brimer<o:p></o:p></p></div></body></html> ------_=_NextPart_001_01D018AB.ADA98816--

2 2

oVirt Neutron integration question
by Andrew Brimer 15 Dec '14

15 Dec '14

This is a multi-part message in MIME format. ------_=_NextPart_001_01D018A2.0D0742A8 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi Moti, =20 I am progressing from the Neutron appliance to Neutron on bare metal and have some questions. I currently have a Fedora 20 blade for the RDO PackStack (Icehouse) that will become my Neutron node. =20 Are you able to provide the PackStack answers file and any other configuration details that went into the creation of the appliance?=20 =20 Thanks very much for any help that you could provide to this effort. =20 Kind Regards, =20 Andrew Brimer ------_=_NextPart_001_01D018A2.0D0742A8 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" = xmlns:o=3D"urn:schemas-microsoft-com:office:office" = xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" = xmlns=3D"http://www.w3.org/TR/REC-html40"><head><meta = http-equiv=3DContent-Type content=3D"text/html; = charset=3Dus-ascii"><meta name=3DGenerator content=3D"Microsoft Word 14 = (filtered medium)"><style></style></head><body lang=3DEN-US link=3Dblue = vlink=3Dpurple><div class=3DWordSection1><p class=3DMsoNormal>Hi = Moti,<o:p></o:p></p><p class=3DMsoNormal><o:p> </o:p></p><p = class=3DMsoNormal>I am progressing from the Neutron appliance to Neutron = on bare metal and have some questions. I currently have a Fedora 20 = blade for the RDO PackStack (Icehouse) that will become my Neutron = node.<o:p></o:p></p><p class=3DMsoNormal><o:p> </o:p></p><p = class=3DMsoNormal>Are you able to provide the PackStack answers file and = any other configuration details that went into the creation of the = appliance? <o:p></o:p></p><p class=3DMsoNormal><o:p> </o:p></p><p = class=3DMsoNormal>Thanks very much for any help that you could provide = to this effort.<o:p></o:p></p><p = class=3DMsoNormal><o:p> </o:p></p><p class=3DMsoNormal>Kind = Regards,<o:p></o:p></p><p class=3DMsoNormal><o:p> </o:p></p><p = class=3DMsoNormal>Andrew Brimer<o:p></o:p></p></div></body></html> ------_=_NextPart_001_01D018A2.0D0742A8--

2 1

Import existing Gluster into Ovirt
by John Gardeniers 15 Dec '14

15 Dec '14

While pondering the question of importing an existing Gluster into Ovirt I came across http://www.ovirt.org/Features/Gluster_Import_Existing_Cluster. One rather important question not explicitly addressed in that article is - can the import be safely done while the Gluster installation is live and hosting files? That article is about Ovirt 3.2, is it safe to assume the same procedure holds true for recent versions? regards, John

3 3