May 2014 - Users - Ovirt List Archives

Running oVirt node on existing OS installation

by Simon Barrett

--_000_D86C48DF8800164BBE50B87623F7AC954837B423ln2wio001devtra_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable http://www.ovirt.org/Quick_Start_Guide#Install_Fedora_Host The above doc says "In addition to hypervisor hosts, you can also reconfigu= re servers which are running Fedora to be used as virtual machine hosts." It then has a line to install the repos: yum localinstall http://plain.resources.ovirt.org/pub/yum-repo/ovirt-releas= e34.rpm but then jumps to iptables configuration. Am I missing something? Can anyone give me any pointers on the steps I need to do (after the intial= ovirt-release34.rpm yum install) to install and configure ovirt-node on a = CentOS or Fedora host? Thanks, Simon --_000_D86C48DF8800164BBE50B87623F7AC954837B423ln2wio001devtra_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"EN-GB" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> <a href=3D"http://www.ovirt.org/Quick_Start_Guide#In= stall_Fedora_Host">http://www.ovirt.org/Quick_Start_Guide#Install_Fedora_Ho= st</a><o:p></o:p> <o:p> </o:p> The above doc says “In addition to hypervisor = hosts, you can also reconfigure servers which are running Fedora to be used= as virtual machine hosts.”<o:p></o:p> <o:p> </o:p> It then has a line to install the repos:<o:p></o:p><= /p> <o:p> </o:p> yum localinstall <a hre= f=3D"http://plain.resources.ovirt.org/pub/yum-repo/ovirt-release34.rpm"> http://plain.resources.ovirt.org/pub/yum-repo/ovirt-release34.rpm</a><o:p><= /o:p> <o:p> </o:p> but then jumps to iptables configuration. Am I missi= ng something?<o:p></o:p> <o:p> </o:p> Can anyone give me any pointers on the steps I need = to do (after the intial ovirt-release34.rpm yum install) to install and con= figure ovirt-node on a CentOS or Fedora host?<o:p></o:p> <o:p> </o:p> Thanks,<o:p></o:p> <o:p> </o:p> Simon<o:p></o:p> <o:p> </o:p> </div> </body> </html> --_000_D86C48DF8800164BBE50B87623F7AC954837B423ln2wio001devtra_--

10 years, 5 months

2
1
0 / 0

password with the "&" character not valid during engine-setup

by Nathanaël Blanchet

This is a multi-part message in MIME format. --------------020706090201030700000204 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit Hello, It is not the first time I've noticed that I couldn't choose the password of my own when running engine-setup. I'm used to build my passsords with "&" and each time I choose this one for the db postgres user or the adminb account, engine-setup accept it, but it not usable anymore when trying to log on. I 've found the same issuewhen installing engine-reports, it was aboslutely impossible to log in the report portal. When I change this password into an other one without this character, it works as expected. My keyboard is a french one using fr_FR.UTF8 encoding, but I've never met any other issue expect this one. Is "&" bad interpreted or does it act as a separator character? -- Nathanaël Blanchet Supervision réseau Pôle exploitation et maintenance Département des systèmes d'information 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr --------------020706090201030700000204 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hello, It is not the first time I've noticed that I couldn't choose the password of my own when running engine-setup. I'm used to build my passsords with "&" and each time I choose this one for the db postgres user or the adminb account, engine-setup accept it, but it not usable anymore when trying to log on. I 've found the same issuewhen installing engine-reports, it was aboslutely impossible to log in the report portal. When I change this password into an other one without this character, it works as expected. My keyboard is a french one using fr_FR.UTF8 encoding, but I've never met any other issue expect this one. Is "&" bad interpreted or does it act as a separator character? <pre class="moz-signature" cols="72">-- Nathanaël Blanchet Supervision réseau Pôle exploitation et maintenance Département des systèmes d'information 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 <a class="moz-txt-link-abbreviated" href="mailto:blanchet@abes.fr">blanchet(a)abes.fr</a> </pre> </body> </html> --------------020706090201030700000204--

10 years, 5 months

2
1
0 / 0

How do i use local storage of hosts with ovirt?

by Grant Tailor

I plan NOT to use shared storage or network storage and will be using local storage of hosts to provision storage for VMs How do i do this? For example in this screenshot, no way to configure local storage Thanks

10 years, 5 months

5
6
0 / 0

oVirt 3.5.0 release schedule updated

by Sandro Bonazzola

Here is the updated schedule for oVirt 3.5.0. These are tentative planning dates and may change: General availability: 2014-08-04 (Mon) oVirt 3.5 Second Test Day: 2014-07-22 (Tue) RC Build: 2014-07-16 (Wed) oVirt 3.5 First Test Day: 2014-07-01 (Tue) Branching - Beta release: 2014-06-26 (Thu) Feature freeze: 2014-06-15 (Sun) Second Alpha release: 2014-06-05 (Thu) Release management page has been updated accordingly: http://www.ovirt.org/OVirt_3.5_release-management oVirt Google Calendar has been updated accordingly: ICAL: https://www.google.com/calendar/ical/ppqtk46u9cglj7l987ruo2l0f8%40group.c... XML: https://www.google.com/calendar/feeds/ppqtk46u9cglj7l987ruo2l0f8%40group.... HTML: https://www.google.com/calendar/embed?src=ppqtk46u9cglj7l987ruo2l0f8%40gr... Thanks, -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

10 years, 5 months

2
2
0 / 0

Re: [ovirt-users] Server 2012 R2 no drive found (Solved)

by Neil

Good morning guys, I've got good news, I re-downloaded the Windows 2012R2 ISO last night because a technician informed me that the original ISO was smaller than the size mentioned on the Windows download link. After re-downloading it and uploading it again, everything is now working perfectly and I can install using virtio or IDE. My apologies for this being such a silly issue. Thank you very much for your all of your assistance. It is greatly appreciated as usual. Kind regards. Neil Wilson. On Wed, May 28, 2014 at 7:12 PM, Neil <nwilson123(a)gmail.com> wrote: > Hi Gianluca, > > Quite correct on all counts, it was migrated from dreyou 3.1 and it was a > new vm created in 3.4, so there could be inconsistencies from the upgrade > but I've got no idea where to even start in trying to find them. I'll verify > all the packages have been upgraded tomorrow and check from there. > > Thanks for the assistance. > > Regards. > > Neil Wilson > > On 28 May 2014 6:06 PM, "Gianluca Cecchi" <gianluca.cecchi(a)gmail.com> wrote: >> >> You wrote that you migrated from 3.1 to 3.4. >> I imagine this is a new VM created from scratch when already in 3.4, >> correct? >> If I remember correctly 3.1 form ovirt repos was not available for CentOS >> 6.x, correct? >> So what was your upgrade path? Did you come from Dreyou repo and then >> updated from Dreyou repo for 3.1 to oVirt repo for 3.4? >> Did you verify if any package from that repo still remained and for any >> reason create inconsistencies with current environment? >> >> Just guessing ... >> >> Gianluca >>

10 years, 5 months

1
0
0 / 0

[QE][ACTION NEEDED] oVirt 3.5.0 Second Alpha status

by Sandro Bonazzola

Hi, We're preparing for feature freeze scheduled for 2014-05-30. We're going to compose a Second Alpha on Firday *2014-05-30 08:00 UTC*. Maintainers: - Please be sure that master snapshot allow to create VMs before *2014-05-29 15:00 UTC* The bug tracker [1] shows the following proposed blockers to be reviewed: Bug ID Whiteboard Status Summary 1001100 integration NEW Add log gathering for a new ovirt module (External scheduler) 1073944 integration ASSIGNED Add log gathering for a new ovirt module (External scheduler) 1060198 integration NEW [RFE] add support for Fedora 20 1100236 integration NEW all-in-one setup should configure cluster compatibility as max common between vdsm and engine Feature freeze has been postponed to 2014-05-30 and the following features should be testable in 3.5.0 Alpha according to Features Status Table [2] Group oVirt BZ Title gluster 1096713 Monitoring (UI plugin) Dashboard (Integrated with Nagios monitoring) infra 1090530 [RFE] Please add host count and guest count columns to "Clusters" tab in webadmin infra 1078738 [RFE] make ovirt easy configurable to allow redirection of all logs to syslog infra 1054778 [RFE] Allow to perform fence operations from a host in another DC infra 1090803 [RFE] Change the "Slot" field to "Service Profile" when cisco_ucs is selected as the fencing type infra 1090511 [RFE] Improve fencing robustness by retrying failed attempts infra 1090800 [RFE] Add periodic power management health check to detect/warn about link-down detection of power management LAN infra 1090794 [RFE] Search VMs based on MAC address from web-admin portal infra 1090793 consider the event type while printing events to engine.log infra 1090796 [RFE] Re-work engine ovirt-node host-deploy sequence infra 1090798 [RFE] Admin GUI - Add host uptime information to the "General" tab infra 1090808 [RFE] Ability to dismiss alerts and events from web-admin portal infra 1058737 [RFE] Restart HA VMs ASAP infra-api 1090797 [RFE] RESTAPI: Add /tags sub-collection for Template resource infra-dwh 1091686 prevent OutOfMemoryError after starting the dwh service. infra-dwh 1091687 History DB should sync user's first and last name for user usage tables network 1078836 Add a warning when adding display network network 1079719 Display of NIC Slave/Bond fault on Event Log network 1080984 Support bridging_opts functionality within oVirt network 1080987 Support ethtool_opts functionality within oVirt network 1078862 Providing Neutron Applience storage Store OVF on any domains storage 1083312 Disk alias recycling in web-admin portal storage 1086181 [RFE] Snapshot overview in webadmin portal ux 1064543 oVirt new look and feel [PatternFly adoption] - phase #1 virt 1058832 Allow to clone a (down) VM without snapshot/template virt 1031040 can't set different keymap for vnc via runonce option virt 1043471 oVirt guest agent for SLES virt 1073453 Debian 7 support (incl. 1043474 oVirt guest agent for Debian) virt 1072313 Edit Running Vm virt 1083049 add progress bar for vm migration virt 1083065 EL 7 guest compatibility virt Allow guest serial number to be configurable virt 1047624 [RFE] support BIOS boot device menu virt 1083129 allows setting netbios name, locale, language and keyboard settings for windows vm's virt 1038632 spice-html5 button to show debug console/output window virt 1080002 [RFE] Enable user defined Windows Sysprep file Some more features may be included since they were near to be completed on last sync meeting. The table will be updated on next sync meeting scheduled for 2014-05-28. There are still 377 bugs [3] targeted to 3.5.0. Excluding node and documentation bugs we still have 314 bugs [4] targeted to 3.5.0. Maintainers / Assignee: - Please remember to rebuild your packages before *2014-05-29 15:00 UTC* if needed, otherwise nightly snapshot will be taken. - Please be sure that master snapshot allow to create VMs before *2014-05-29 15:00 UTC* - If you find a blocker bug please remember to add it to the tracker [1] - Please start filling release notes, the page has been created here [5] - Please review and add test cases to oVirt 3.5 Test Day [6] Community: - You're welcome to join us testing this alpha release and getting involved in oVirt Quality Assurance[7]! [1] http://bugzilla.redhat.com/1073943 [2] http://bit.ly/17qBn6F [3] http://red.ht/1pVEk7H [4] http://red.ht/1rLCJwF [5] http://www.ovirt.org/OVirt_3.5_Release_Notes [6] http://www.ovirt.org/OVirt_3.5_TestDay [7] http://www.ovirt.org/OVirt_Quality_Assurance Thanks, -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

10 years, 5 months

2
2
0 / 0

Selecting which host to run a VM on using ovirt-shell

by Joop

Hi List, As per the subject, I have a desire to start a lot of VMs after a maintenance shutdown of our infrastructure and I would like to either evenly spread the load among the hosts or to restart the VMs on the host they were on before shutdown. Getting the list using ovirt-shell and transforming that to a 'action vm ABC start' is no problem but I can't find if its possible to specify the host to run the VM on. Is this possible using ovirt-shell and can someone point me to some docs? (Have read (all) the rhevm docs but either overlooked or its not there) Regards, Joop

10 years, 5 months

2
3
0 / 0

Re: [ovirt-users] Server 2012 R2 no drive found

by Neil

Hi Rene, Thanks for testing this out. It seems I'm doing the exact same thing, but I don't get any IDE drive showing, and again when I try using the virtio from the same link for the virtio drivers using the same directory from Win8 AMD64 it lists the virtio-scsi pass through as a compatible driver, but if you click "Next" to install, it says "No new device drivers were found. Make sure the media contains the correct drivers, and then click OK" Attached is a screenshot showing the error... So if I go and change my disks to virtio, virtio-scsi, or IDE under "disks --> edit" I get the same result. I've also right clicked on the VM, gone to advanced, resources and then enabled or disabled "Virtio-SCSI enabled". Something really doesn't seem right. When you create a VM, have you got the option to choose 2012 R2, or do you also only have 2012 showing in the list of operating systems? Thank you so much. Regards. Neil Wilson. On Wed, May 28, 2014 at 4:43 PM, René Koch <rkoch(a)linuxland.at> wrote: > On 05/28/2014 02:45 PM, Neil wrote: >> >> Thank you Rene, greatly appreciated. > > > No problem. > > >> >> I'm using the Server 2012 R2 Standard edition and at this point I >> haven't even got a NIC added to the VM. > > > I installed Server 2012 R2 Standard as well. > > >> >> Another piece of info which might be useful (or not) is I'm using a FC >> SAN for storage, not sure if this would have any affect. > > > This shouldn't have an effect. I have oVirt/RHEV running/installed on > RC/iSCSI/NFS/GlusterFS and local storage and it never had an influence on > virtual disks. > > > Here are my findings from 2 installation tests: > > - IDE works fine out of the box - installer detects the hard drive and I can > install on this disk (see attached screenshot) > > - VirtIO works fine if you use the drivers from linux-kvm.org but it's a bit > tricky as there's no virtual floppy disk (vfd) and oVirt only has 1 virtual > CD drive: > > 1. Download > http://alt.fedoraproject.org/pub/alt/virtio-win/latest/images/virtio-win-... > to your ISO domain > 2. Start installation of Windows Server 2012 R2 by booting from Windows > Server ISO > 3. As no disk is detected choose Load driver > 4. In webadmin change cd to virtio-win-0.1-74.iso > 5. In Windows installer use Windows8/amd64 drivers (select all drivers which > are detected on cd) > 6. Change cd to Windows Server 2012 R2 ISO and click on Refresh in Windows > disk setup dialog (Installer displays the disk but complains that it can't > install on this disk because the Windows Server ISO isn't inserted) > > > So as a conclusion: > You can install Server 2012 R2 without driver disk from RHEL supplementary > channel (and therefor without a valid RHEL subscription), but you have to > choose drivers for Windows 8, as there are no official drivers available for > Server 2012 (or at least I couldn't find them). > > > I hope this helps. > > > Regards, > René > > >> >> Thanks. >> >> Regards. >> >> Neil Wilson. >> >> >> On Wed, May 28, 2014 at 2:42 PM, René Koch <rkoch(a)linuxland.at> wrote: >>> >>> Hi Neil, >>> >>> I'll test Windows Server 2012 R2 again with IDE and VirtIO disks (and >>> e1000 >>> and VirtIO network cards) with VirtIO-drivers from RHEL channel and >>> drivers >>> bundles with spice guest agent and will let you know the results. Please >>> keep in mind that it will take some time... >>> Btw, I will use Windows 2012 R2 english, 180-days trial... >>> >>> >>> Regards, >>> René >>> >>> >>> >>> On 05/28/2014 01:11 PM, Neil wrote: >>>> >>>> >>>> Hi guys, >>>> >>>> Is anyone able to assist here? I still can't install 2012 R2, whether >>>> I use IDE, virtio, or virtio-scsi, I don't see a drive during the >>>> first install. >>>> >>>> I've tried the "virtio-win-1.6.8/vioserial/2k12R2/amd64" as a test and >>>> this also doesn't work, so it doesn't seem like a driver issue, more >>>> of a cluster issue. >>>> >>>> I've also tried changing my Datacenter compatibility and Cluster to >>>> 3.4, but this seemed to make no difference. Both my hosts are upgraded >>>> to Centos 6.5 all updates, as well as my ovirt and VDSM is updated to >>>> the latest stable 3.4 packages. >>>> >>>> I'm at a loss here, but desperately need to get this R2 installed. >>>> >>>> Further to what Paul mentioned below, this was upgraded from 3.1 so it >>>> doesn't just appear to happen to new 3.4 installs. >>>> >>>> Any help is greatly appreciated. >>>> >>>> On Mon, May 26, 2014 at 12:45 PM, Neil <nwilson123(a)gmail.com> wrote: >>>>> >>>>> >>>>> Hi guys, >>>>> >>>>> Thanks for the replies. >>>>> >>>>> What's strange is that even when choosing an IDE disk I don't see any >>>>> hard drive showing up when I try to install 2012R2, is this normal? I >>>>> can understand why R2 won't see the virtio scsi disk, but to me it >>>>> should be showing up when using IDE, or am I wrong here? >>>>> >>>>> I see that in the virtio drivers from RHEL supplementary there is a >>>>> folder "virtio-win-1.6.8/vioserial/2k12R2/amd64" but the license seems >>>>> to indicate that you need a valid subscription in order to use these >>>>> drivers... if this is true then is no one using server 2012 R2 on >>>>> oVirt without a valid subscription? >>>>> >>>>> I see with the drivers from >>>>> "http://alt.fedoraproject.org/pub/alt/virtio-win/latest/images/src/" >>>>> there is only a Win8 driver, and trying to use this on my 2012 R2 >>>>> doesn't find a matching driver. >>>>> >>>>> Can anyone clarify this from Redhat? If you using RHEV, presumably you >>>>> can use R2, but it seems using oVirt you aren't allowed to? >>>>> >>>>> Thanks. >>>>> >>>>> Regards. >>>>> >>>>> Neil Wilson. >>>>> >>>>> >>>>> >>>>> On Fri, May 23, 2014 at 10:40 PM, Paul.LKW <paul.lkw(a)gmail.com> wrote: >>>>>> >>>>>> >>>>>> Hi guys: >>>>>> Please do not just say your one is working it is helpless in fact >>>>>> there >>>>>> already some guys reported issues in Win platform (including me) and >>>>>> there >>>>>> is no way to report that, do your think paid version in Redhat would >>>>>> be >>>>>> the >>>>>> same or the client will already fxxked. >>>>>> I noted this seems occured only in newly installed ovirt and old >>>>>> installation is fine. >>>>>> >>>>>> Paul.LKW >>>>>> >>>>>> 於 2014/5/23 下午11:02，"Neil" <nwilson123(a)gmail.com> 寫道： >>>>>>> >>>>>>> >>>>>>> >>>>>>> Hi guys, >>>>>>> >>>>>>> I've been trying to install 2012 R2 onto my ovirt 3.4 but no matter >>>>>>> what I do, it either doesn't find an IDE drive or a Virtio drive >>>>>>> (when >>>>>>> using the virtio ISO). >>>>>>> >>>>>>> ovirt-engine-lib-3.4.0-1.el6.noarch >>>>>>> ovirt-engine-restapi-3.4.0-1.el6.noarch >>>>>>> ovirt-engine-setup-plugin-ovirt-engine-3.4.0-1.el6.noarch >>>>>>> ovirt-engine-3.4.0-1.el6.noarch >>>>>>> ovirt-engine-setup-plugin-websocket-proxy-3.4.0-1.el6.noarch >>>>>>> ovirt-host-deploy-java-1.2.0-1.el6.noarch >>>>>>> ovirt-engine-cli-3.2.0.10-1.el6.noarch >>>>>>> ovirt-engine-setup-3.4.0-1.el6.noarch >>>>>>> ovirt-host-deploy-1.2.0-1.el6.noarch >>>>>>> ovirt-engine-backend-3.4.0-1.el6.noarch >>>>>>> ovirt-image-uploader-3.4.0-1.el6.noarch >>>>>>> ovirt-engine-tools-3.4.0-1.el6.noarch >>>>>>> ovirt-engine-sdk-python-3.4.0.7-1.el6.noarch >>>>>>> ovirt-engine-webadmin-portal-3.4.0-1.el6.noarch >>>>>>> ovirt-engine-setup-base-3.4.0-1.el6.noarch >>>>>>> ovirt-iso-uploader-3.4.0-1.el6.noarch >>>>>>> ovirt-engine-userportal-3.4.0-1.el6.noarch >>>>>>> ovirt-log-collector-3.4.1-1.el6.noarch >>>>>>> ovirt-engine-websocket-proxy-3.4.0-1.el6.noarch >>>>>>> ovirt-engine-setup-plugin-ovirt-engine-common-3.4.0-1.el6.noarch >>>>>>> ovirt-engine-dbscripts-3.4.0-1.el6.noarch >>>>>>> >>>>>>> vdsm-4.14.6-0.el6.x86_64 >>>>>>> vdsm-xmlrpc-4.14.6-0.el6.noarch >>>>>>> vdsm-cli-4.14.6-0.el6.noarch >>>>>>> vdsm-python-zombiereaper-4.14.6-0.el6.noarch >>>>>>> vdsm-python-4.14.6-0.el6.x86_64 >>>>>>> >>>>>>> qemu-img-0.12.1.2-2.415.el6_5.8.x86_64 >>>>>>> qemu-kvm-tools-0.12.1.2-2.415.el6_5.8.x86_64 >>>>>>> qemu-kvm-0.12.1.2-2.415.el6_5.8.x86_64 >>>>>>> gpxe-roms-qemu-0.9.7-6.9.el6.noarch >>>>>>> >>>>>>> Is there a special trick to get this working, or could something be >>>>>>> wrong? When it comes to creating a guest I don't see a Server 2012 R2 >>>>>>> 64bit in the drop down list? >>>>>>> >>>>>>> Thanks. >>>>>>> >>>>>>> Regards. >>>>>>> >>>>>>> Neil Wilson. >>>>>>> _______________________________________________ >>>>>>> Users mailing list >>>>>>> Users(a)ovirt.org >>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users(a)ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>> >

10 years, 6 months

2
2
0 / 0

Persisting glusterfs configs on an oVirt node

by Simon Barrett

--_000_D86C48DF8800164BBE50B87623F7AC954836B051ln2wio001devtra_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable I am working through the setup of oVirt node for a 3.4.1 deployment. I setup some glusterfs volumes/bricks on oVirt Node Hypervisor release 3.0.= 4 (1.0.201401291204.el6) and created a storage domain. All was working OK u= ntil I rebooted the node and found that the glusterfs configuration had not= been retained. Is there something I should be doing to persist any glusterfs configuration= so it survives a node reboot? Many thanks, Simon --_000_D86C48DF8800164BBE50B87623F7AC954836B051ln2wio001devtra_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"EN-GB" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> I am working through the setup of oVirt node for a 3= .4.1 deployment.<o:p></o:p> <o:p> </o:p> I setup some glusterfs volumes/bricks on oVirt Node = Hypervisor release 3.0.4 (1.0.201401291204.el6) and created a storage domai= n. All was working OK until I rebooted the node and found that the glusterf= s configuration had not been retained.<o:p></o:p> <o:p> </o:p> Is there something I should be doing to persist any = glusterfs configuration so it survives a node reboot?<o:p></o:p> <o:p> </o:p> Many thanks,<o:p></o:p> <o:p> </o:p> Simon<o:p></o:p> <o:p> </o:p> </div> </body> </html> --_000_D86C48DF8800164BBE50B87623F7AC954836B051ln2wio001devtra_--

10 years, 6 months

4
12
0 / 0

Re: [ovirt-users] Server 2012 R2 no drive found

by Neil

Thank you Rene, greatly appreciated. I'm using the Server 2012 R2 Standard edition and at this point I haven't even got a NIC added to the VM. Another piece of info which might be useful (or not) is I'm using a FC SAN for storage, not sure if this would have any affect. Thanks. Regards. Neil Wilson. On Wed, May 28, 2014 at 2:42 PM, René Koch <rkoch(a)linuxland.at> wrote: > Hi Neil, > > I'll test Windows Server 2012 R2 again with IDE and VirtIO disks (and e1000 > and VirtIO network cards) with VirtIO-drivers from RHEL channel and drivers > bundles with spice guest agent and will let you know the results. Please > keep in mind that it will take some time... > Btw, I will use Windows 2012 R2 english, 180-days trial... > > > Regards, > René > > > > On 05/28/2014 01:11 PM, Neil wrote: >> >> Hi guys, >> >> Is anyone able to assist here? I still can't install 2012 R2, whether >> I use IDE, virtio, or virtio-scsi, I don't see a drive during the >> first install. >> >> I've tried the "virtio-win-1.6.8/vioserial/2k12R2/amd64" as a test and >> this also doesn't work, so it doesn't seem like a driver issue, more >> of a cluster issue. >> >> I've also tried changing my Datacenter compatibility and Cluster to >> 3.4, but this seemed to make no difference. Both my hosts are upgraded >> to Centos 6.5 all updates, as well as my ovirt and VDSM is updated to >> the latest stable 3.4 packages. >> >> I'm at a loss here, but desperately need to get this R2 installed. >> >> Further to what Paul mentioned below, this was upgraded from 3.1 so it >> doesn't just appear to happen to new 3.4 installs. >> >> Any help is greatly appreciated. >> >> On Mon, May 26, 2014 at 12:45 PM, Neil <nwilson123(a)gmail.com> wrote: >>> >>> Hi guys, >>> >>> Thanks for the replies. >>> >>> What's strange is that even when choosing an IDE disk I don't see any >>> hard drive showing up when I try to install 2012R2, is this normal? I >>> can understand why R2 won't see the virtio scsi disk, but to me it >>> should be showing up when using IDE, or am I wrong here? >>> >>> I see that in the virtio drivers from RHEL supplementary there is a >>> folder "virtio-win-1.6.8/vioserial/2k12R2/amd64" but the license seems >>> to indicate that you need a valid subscription in order to use these >>> drivers... if this is true then is no one using server 2012 R2 on >>> oVirt without a valid subscription? >>> >>> I see with the drivers from >>> "http://alt.fedoraproject.org/pub/alt/virtio-win/latest/images/src/" >>> there is only a Win8 driver, and trying to use this on my 2012 R2 >>> doesn't find a matching driver. >>> >>> Can anyone clarify this from Redhat? If you using RHEV, presumably you >>> can use R2, but it seems using oVirt you aren't allowed to? >>> >>> Thanks. >>> >>> Regards. >>> >>> Neil Wilson. >>> >>> >>> >>> On Fri, May 23, 2014 at 10:40 PM, Paul.LKW <paul.lkw(a)gmail.com> wrote: >>>> >>>> Hi guys: >>>> Please do not just say your one is working it is helpless in fact there >>>> already some guys reported issues in Win platform (including me) and >>>> there >>>> is no way to report that, do your think paid version in Redhat would be >>>> the >>>> same or the client will already fxxked. >>>> I noted this seems occured only in newly installed ovirt and old >>>> installation is fine. >>>> >>>> Paul.LKW >>>> >>>> 於 2014/5/23 下午11:02，"Neil" <nwilson123(a)gmail.com> 寫道： >>>>> >>>>> >>>>> Hi guys, >>>>> >>>>> I've been trying to install 2012 R2 onto my ovirt 3.4 but no matter >>>>> what I do, it either doesn't find an IDE drive or a Virtio drive (when >>>>> using the virtio ISO). >>>>> >>>>> ovirt-engine-lib-3.4.0-1.el6.noarch >>>>> ovirt-engine-restapi-3.4.0-1.el6.noarch >>>>> ovirt-engine-setup-plugin-ovirt-engine-3.4.0-1.el6.noarch >>>>> ovirt-engine-3.4.0-1.el6.noarch >>>>> ovirt-engine-setup-plugin-websocket-proxy-3.4.0-1.el6.noarch >>>>> ovirt-host-deploy-java-1.2.0-1.el6.noarch >>>>> ovirt-engine-cli-3.2.0.10-1.el6.noarch >>>>> ovirt-engine-setup-3.4.0-1.el6.noarch >>>>> ovirt-host-deploy-1.2.0-1.el6.noarch >>>>> ovirt-engine-backend-3.4.0-1.el6.noarch >>>>> ovirt-image-uploader-3.4.0-1.el6.noarch >>>>> ovirt-engine-tools-3.4.0-1.el6.noarch >>>>> ovirt-engine-sdk-python-3.4.0.7-1.el6.noarch >>>>> ovirt-engine-webadmin-portal-3.4.0-1.el6.noarch >>>>> ovirt-engine-setup-base-3.4.0-1.el6.noarch >>>>> ovirt-iso-uploader-3.4.0-1.el6.noarch >>>>> ovirt-engine-userportal-3.4.0-1.el6.noarch >>>>> ovirt-log-collector-3.4.1-1.el6.noarch >>>>> ovirt-engine-websocket-proxy-3.4.0-1.el6.noarch >>>>> ovirt-engine-setup-plugin-ovirt-engine-common-3.4.0-1.el6.noarch >>>>> ovirt-engine-dbscripts-3.4.0-1.el6.noarch >>>>> >>>>> vdsm-4.14.6-0.el6.x86_64 >>>>> vdsm-xmlrpc-4.14.6-0.el6.noarch >>>>> vdsm-cli-4.14.6-0.el6.noarch >>>>> vdsm-python-zombiereaper-4.14.6-0.el6.noarch >>>>> vdsm-python-4.14.6-0.el6.x86_64 >>>>> >>>>> qemu-img-0.12.1.2-2.415.el6_5.8.x86_64 >>>>> qemu-kvm-tools-0.12.1.2-2.415.el6_5.8.x86_64 >>>>> qemu-kvm-0.12.1.2-2.415.el6_5.8.x86_64 >>>>> gpxe-roms-qemu-0.9.7-6.9.el6.noarch >>>>> >>>>> Is there a special trick to get this working, or could something be >>>>> wrong? When it comes to creating a guest I don't see a Server 2012 R2 >>>>> 64bit in the drop down list? >>>>> >>>>> Thanks. >>>>> >>>>> Regards. >>>>> >>>>> Neil Wilson. >>>>> _______________________________________________ >>>>> Users mailing list >>>>> Users(a)ovirt.org >>>>> http://lists.ovirt.org/mailman/listinfo/users >> >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >

10 years, 6 months

2
1
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Users May 2014