Anyone using YAML support in the RESTAPI?
by Juan Hernández
Hello,
Does anyone have a good reason to not remove the YAML support from the
RESTAPI? As far as I know it isn't used or tested in any reasonable way,
so I would like to remove it completely for 3.6. If anyone is using it
and can't move to JSON or XML please speak up.
Regards,
Juan Hernandez
--
Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta
3ºD, 28016 Madrid, Spain
Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L.
10 years, 2 months
Network QOS not working for VM Outbound
by Punit Dambiwal
Hi,
I have check and found that the Network QOS not working for VM
outbound....it's working fine for Inbound only...
[image: Inline image 1]
root@vm3:~# ./speedtest_cli.py
Retrieving speedtest.net configuration...
Retrieving speedtest.net server list...
Testing from (103.4.X.X)...
Selecting best server based on latency...
Hosted by HKIX1 (Hong Kong) [3.70 km]: 3.153 ms
Testing download speed........................................
Download: 1.95 Mbit/s
Testing upload speed..................................................
Upload: 143.09 Mbit/s
Thanks,
Punit
10 years, 3 months
Guest PXE boot with 2 NICs : MAC order
by Nicolas Ecarnot
Hello,
I can't remember if I already asked that here, but my researches
returned nothing obvious.
It is frequent in our setup to boot a VM setup with two NICS :
- one in a network with a DHCP server, leading to a PXE/tftp/kickstart setup
- a second one with a network with no DHCP, nor routed. We use this
network in some cases to access iSCSI data.
When PXE booting such a VM, I realized that in gPXE, the NICs are order
according to their MAC address (net0, net1...)
I found no mean to explicitly tell gPXE to use a specific interface, and
it is a pain, because my setup workflow implies I could choose the
correct interface.
In the oVirt web GUI, I found nothing about that.
In the ovirt-shell, I had no better luck.
In the gPXE wiki, I found nothing more that what's above.
This is not a big issue, but was worth asking.
--
Nicolas Ecarnot
10 years, 3 months
Snapshot issue
by Koen Vanoppen
Dear all,
I have the following problem:
Cannot run VM. The VM is performing an operation on a Snapshot. Please wait
for the operation to finish, and try again.
It is like this since Friday... How can I resolve this? I really need this
vm to be up again...
Kind regards,
Koen
10 years, 3 months
engine-setup fails with FATAL: Cannot execute sql command:
by mad Engineer
Hello All,
Trying ovirt on centos 6.5 but fails at PostgreSQL
configuration
with error
[ ERROR ] Failed to execute stage 'Misc configuration': Command
'/usr/share/ovirt-engine/dbscripts/create_schema.sh' failed to execute
Inside log it shows this
2015-03-31 17:47:15 DEBUG
otopi.plugins.ovirt_engine_setup.ovirt_engine.db.schema
plugin.execute:866 execute-output:
['/usr/share/ovirt-engine/dbscripts/schema.sh', '-s', 'localhost',
'-p', '5432', '-u', 'engine', '-d', 'engine', '-l',
'/var/log/ovirt-engine/setup/ovirt-engine-setup-20150331174256-pehvs7.log',
'-c', 'apply'] stderr:
psql:/usr/share/ovirt-engine/dbscripts/upgrade/03_05_0210_change_group_ids.sql:59:
ERROR: could not open relation with OID 32878
CONTEXT: SQL statement "CREATE temp TABLE tmp_users_groups ON COMMIT
DROP AS SELECT fnsplitteruuid(group_ids) AS group_id, user_id FROM
users"
PL/pgSQL function "__temp_change_group_ids_03_05_0210" line 35 at SQL statement
FATAL: Cannot execute sql command:
--file=/usr/share/ovirt-engine/dbscripts/upgrade/03_05_0210_change_group_ids.sql
2015-03-31 17:47:15 DEBUG otopi.context context._executeMethod:152
method exception
Traceback (most recent call last):
File "/usr/lib/python2.6/site-packages/otopi/context.py", line 142,
in _executeMethod
method['method']()
File "/usr/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-setup/ovirt-engine/db/schema.py",
line 291, in _misc
oenginecons.EngineDBEnv.PGPASS_FILE
File "/usr/lib/python2.6/site-packages/otopi/plugin.py", line 871, in execute
command=args[0],
RuntimeError: Command '/usr/share/ovirt-engine/dbscripts/schema.sh'
failed to execute
2015-03-31 17:47:15 ERROR otopi.context context._executeMethod:161
Failed to execute stage 'Misc configuration': Command
'/usr/share/ovirt-engine/dbscripts/schema.sh' failed to execute
Can some one please help me with this please
10 years, 3 months
VDSM memory consumption
by Federico Alberto Sayd
Hello:
I am experiencing troubles with VDSM memory consuption.
I am running
Engine: ovirt 3.5.1
Nodes:
Centos 6.6
VDSM 4.16.10-8
Libvirt: libvirt-0.10.2-46
Kernel: 2.6.32
When the host boots, memory consuption is normal, but after 2 or 3 days
running, VDSM memory consuption grows and it consumes more memory that
all vm's running in the host. If I restart the vdsm service, memory
consuption normalizes, but then it start growing again.
I have seen some BZ about vdsm and supervdsm about memory leaks, but I
don't know if VDSM 4.6.10.8 is still affected by a related bug.
Any help? If you need, I can provide more information
Thank you
10 years, 3 months
Problem with USB redirection
by Juan Jose
Hello everybody,
I have installed a little infrestructure with ovirt 3.5.0.1 and I have some
Windows 7 VMs created and working well. From linux client, when I go to
user portal and open a VM (all these VM have defined in console USB
support as Native) and I plug a USB pen drive, the VM takes it and I can
use it from my Windows 7 VM.
But I have a problem with Windows 7 clients. When I try to redirect a USB
from my Windows 7 client to my Windows 7 VM the remote-viewer gives the
error "USB redirections support not compiled in". Any suggest or idea about
what is my problem?
Many thanks in advanced,
Juanjo.
10 years, 3 months
firewalld rules for engine
by Jorick Astrego
This is a multi-part message in MIME format.
--------------030107030100090207010401
Content-Type: text/plain;
charset="utf-8"
Content-Transfer-Encoding: quoted-printable
Hi=2C
After running engine-setup =283=2E5=2E2rc2=29 on Centos 7=2C the setup tell=
s me
the following
In order to configure firewalld=2C copy the files from
/etc/ovirt-engine/firewalld to /etc/firewalld/services
and execute the following commands=3A
firewall-cmd -service ovirt-nfs
firewall-cmd -service ovirt-postgres
firewall-cmd -service ovirt-https
firewall-cmd -service ovirt-fence-kdump-listener
firewall-cmd -service ovirt-websocket-proxy
firewall-cmd -service ovirt-http
The commands above don=27t work=2C shouldn=27t they be=3A
firewall-cmd --permanent --add-service ovirt-nfs
firewall-cmd --permanent --add-service ovirt-postgres
firewall-cmd --permanent --add-service ovirt-https
firewall-cmd --permanent --add-service ovirt-fence-kdump-listener
firewall-cmd --permanent --add-service ovirt-websocket-proxy
firewall-cmd --permanent --add-service ovirt-http
firewall-cmd --reload
Kind regards=2C
Jorick Astrego
Met vriendelijke groet=2C With kind regards=2C
Jorick Astrego
Netbulae Virtualization Experts=20
----------------
=09Tel=3A 053 20 30 270 =09info=40netbulae=2Eeu =09Staalsteden 4-3A =09KvK=
08198180
=09Fax=3A 053 20 30 271 =09www=2Enetbulae=2Eeu =097547 TA Enschede =09BTW=
NL821234584B01
----------------
--------------030107030100090207010401
Content-Type: text/html;
charset="utf-8"
Content-Transfer-Encoding: quoted-printable
=3Chtml=3E
=3Chead=3E
=3Cmeta http-equiv=3D=22content-type=22 content=3D=22text/html=3B chars=
et=3Dutf-8=22=3E
=3C/head=3E
=3Cbody bgcolor=3D=22=23FFFFFF=22 text=3D=22=23000000=22=3E
Hi=2C=3Cbr=3E
=3Cbr=3E
After running engine-setup =283=2E5=2E2rc2=29 on Centos 7=2C the setup=
tells
me the following=3Cbr=3E
=3Cbr=3E
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 In order to conf=
igure firewalld=2C copy the files from=3Cbr=3E
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0 /etc/ovirt-engine/firewalld to /etc/firewalld/services=3Cbr=3E=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0 and execute the following commands=3A=3Cbr=3E
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0 firewall-cmd -service ovirt-nfs=3Cbr=3E
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0 firewall-cmd -service ovirt-postgres=3Cbr=3E
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0 firewall-cmd -service ovirt-https=3Cbr=3E
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0 firewall-cmd -service ovirt-fence-kdump-listener=3Cbr=3E
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0 firewall-cmd -service ovirt-websocket-proxy=3Cbr=3E
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0 firewall-cmd -service ovirt-http=3Cbr=3E
=3Cbr=3E
The commands above don=27t work=2C shouldn=27t they be=3A=3Cbr=3E
=3Cbr=3E
=3Cblockquote=3Efirewall-cmd --permanent --add-service ovirt-nfs=3Cbr=
=3E
firewall-cmd --permanent --add-service ovirt-postgres=3Cbr=3E
firewall-cmd --permanent --add-service ovirt-https=3Cbr=3E
firewall-cmd --permanent --add-service ovirt-fence-kdump-listener=3Cb=
r=3E
firewall-cmd --permanent --add-service ovirt-websocket-proxy=3Cbr=3E=
firewall-cmd --permanent --add-service ovirt-http=3Cbr=3E
firewall-cmd --reload=3Cbr=3E
=3C/blockquote=3E
Kind regards=2C=3Cbr=3E
=3Cbr=3E
Jorick Astrego=3Cbr=3E
=20=
=3CBR /=3E
=3CBR /=3E
=3Cb style=3D=22color=3A=23604c78=22=3E=3C/b=3E=3Cbr=3E=3Cspan style=3D=22c=
olor=3A=23604c78=3B=22=3E=3Cfont color=3D=22000000=22=3E=3Cspan style=3D=22=
mso-fareast-language=3Aen-gb=3B=22 lang=3D=22NL=22=3EMet vriendelijke groet=
=2C With kind regards=2C=3Cbr=3E=3Cbr=3E=3C/span=3EJorick Astrego=3C/font=
=3E=3C/span=3E=3Cb style=3D=22color=3A=23604c78=22=3E=3Cbr=3E=3Cbr=3ENetbul=
ae Virtualization Experts =3C/b=3E=3Cbr=3E=3Chr style=3D=22border=3Anone=3B=
border-top=3A1px solid =23ccc=3B=22=3E=3Ctable style=3D=22width=3A 522px=22=
=3E=3Ctbody=3E=3Ctr=3E=3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=
=22=3ETel=3A 053 20 30 270=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bf=
ont-size=3A 10px=22=3Einfo=40netbulae=2Eeu=3C/td=3E =3Ctd style=3D=22wid=
th=3A 130px=3Bfont-size=3A 10px=22=3EStaalsteden 4-3A=3C/td=3E =3Ctd sty=
le=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3EKvK 08198180=3C/td=3E=3C/tr=
=3E=3Ctr=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3EFax=
=3A 053 20 30 271=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=
=3A 10px=22=3Ewww=2Enetbulae=2Eeu=3C/td=3E =3Ctd style=3D=22width=3A 130=
px=3Bfont-size=3A 10px=22=3E7547 TA Enschede=3C/td=3E =3Ctd style=3D=22w=
idth=3A 130px=3Bfont-size=3A 10px=22=3EBTW NL821234584B01=3C/td=3E=3C/tr=3E=
=3C/tbody=3E=3C/table=3E=3Cbr=3E=3Chr style=3D=22border=3Anone=3Bborder-top=
=3A1px solid =23ccc=3B=22=3E=3CBR /=3E
=3C/body=3E
=3C/html=3E
--------------030107030100090207010401--
10 years, 3 months
