Re: [ovirt-users] Problem Windows guests start in pause
by Dafna Ron
Hi Lucas,
Please send mails to the list next time.
can you please do rpm -qa |grep qemu.
also, can you try a different windows image?
Thanks,
Dafna
On 07/14/2014 02:03 PM, lucas castro wrote:
> On the host there I've tried to run the vm, I use a centOS 6.5
> and checked, no update for qemu, libvirt or related package.
--
Dafna Ron
5 years, 8 months
Failed to deploy ovirt engine with "hosted-engine --deploy"
by Bong Shau Fui
Hi:
I'm new to ovirt. I followed the guide at the page https://www.ovirt.org/documentation/self-hosted/chap-Deploying_Self-Hoste..., started to run "hosted-engine --deploy". It got stuck at the stage TASK [Get local VM IP] for about 5 minutes, and failed. Did a search but came out with nothing. From the log files these 2 lines are shown:
2018-07-25 19:59:11,269+0800 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:94 {u'_ansible_parsed': True, u'stderr_lines': [], u'cmd': u"virsh -r net-dhcp-leases default | grep -i 00:16:3e:5e:43:32 | awk '{ print $5 }' | cut -f1 -d'/'", u'end': u'2018-07-25 19:59:11.081420', u'_ansible_no_log': False, u'stdout': u'', u'changed': True, u'invocation': {u'module_args': {u'warn': True, u'executable': None, u'_uses_shell': True, u'_raw_params': u"virsh -r net-dhcp-leases default | grep -i 00:16:3e:5e:43:32 | awk '{ print $5 }' | cut -f1 -d'/'", u'removes': None, u'argv': None, u'creates': None, u'chdir': None, u'stdin': None}}, u'start': u'2018-07-25 19:59:10.949464', u'attempts': 50, u'stderr': u'', u'rc': 0, u'delta': u'0:00:00.131956', u'stdout_lines': []}
2018-07-25 19:59:11,370+0800 ERROR otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:98 fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "virsh -r net-dhcp-leases default | grep -i 00:16:3e:5e:43:32 | awk '{ print $5 }' | cut -f1 -d'/'", "delta": "0:00:00.131956", "end": "2018-07-25 19:59:11.081420", "rc": 0, "start": "2018-07-25 19:59:10.949464", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []}
Can someone please enlighten me on what has happened? Many thanks in advance.
regards,
Bong SF
5 years, 8 months
VM poor iops
by Leo David
Hi Everyone,
I am encountering the following issue on a single instance hyper-converged
4.2 setup.
The following fio test was done:
fio --randrepeat=1 --ioengine=libaio --direct=1 --gtod_reduce=1 --name=test
--filename=test --bs=4k --iodepth=64 --size=4G --readwrite=randwrite
The results are very poor doing the test inside of a vm with a prealocated
disk on the ssd store: ~2k IOPS
Same test done on the oVirt node directly on the mounted ssd_lvm: ~30k IOPS
Same test done, this time on the gluster mount path: ~20K IOPS
What could be the issue that the vms have this slow hdd performance ( 2k on
ssd !! )?
Thank you very much !
--
Best regards, Leo David
5 years, 8 months
Feature: Hosted engine VM management
by Roy Golan
Hi all,
Upcoming in 3.6 is enhancement for managing the hosted engine VM.
In short, we want to:
* Allow editing the Hosted engine VM, storage domain, disks, networks etc
* Have a shared configuration for the hosted engine VM
* Have a backup for the hosted engine VM configuration
please review and comment on the wiki below:
http://www.ovirt.org/Hosted_engine_VM_management
Thanks,
Roy
5 years, 9 months
Re: [ovirt-users] Large DWH Database, how to empty
by Matt .
Hi,
OK thanks! I saw that after upgrading to 4.0.5 from 4.0.4 the DB
already dropped with around 500MB directly and is now at 2GB smaller.
Does this sounds familiar to you with other settings in 4.0.5 ?
Thanks,
Matt
2017-01-08 10:45 GMT+01:00 Shirly Radco <sradco(a)redhat.com>:
> No. That will corrupt your database.
>
> Are you using the full dwh or the smaller version for the dashboards?
>
> Please set the delete thresholds to save less data and the data older then
> the time you set will be deleted.
> Add a file to /ovirt-engine-dwhd.conf.d/
> update_time_to_keep_records.conf
>
> Add these lines with the new configurations. The numbers represent the hours
> to keep the data.
>
> DWH_TABLES_KEEP_SAMPLES=24
> DWH_TABLES_KEEP_HOURLY=1440
> DWH_TABLES_KEEP_DAILY=43800
>
>
> These are the configurations for a full dwh.
>
> The smaller version configurations are:
> DWH_TABLES_KEEP_SAMPLES=24
> DWH_TABLES_KEEP_HOURLY=720
> DWH_TABLES_KEEP_DAILY=0
>
> The delete process by default at 3am every day (DWH_DELETE_JOB_HOUR=3)
>
> Best regards,
>
> Shirly Radco
>
> BI Software Engineer
> Red Hat Israel Ltd.
> 34 Jerusalem Road
> Building A, 4th floor
> Ra'anana, Israel 4350109
>
>
> On Fri, Jan 6, 2017 at 6:35 PM, Matt . <yamakasi.014(a)gmail.com> wrote:
>>
>> Hi,
>>
>> I seem to have some large database for the DWH logging and I wonder
>> how I can empty it safely.
>>
>> Can I just simply empty the database ?
>>
>> Have a good weekend!
>>
>> Cheers,
>>
>> Matt
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>
>
5 years, 9 months
Re: [ovirt-users] Packet loss
by Doron Fediuck
----_com.android.email_640187878761650
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: base64
SGkgS3lsZSzCoApXZSBtYXkgaGF2ZSBzZWVuIHNvbWV0aGluZyBzaW1pbGFyIGluIHRoZSBwYXN0
IGJ1dCBJIHRoaW5rIHRoZXJlIHdlcmUgdmxhbnMgaW52b2x2ZWQuwqAKSXMgaXQgdGhlIHNhbWUg
Zm9yIHlvdT/CoApUb255IC8gRGFuLCBkb2VzIGl0IHJpbmcgYSBiZWxsP8Kg
----_com.android.email_640187878761650
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: base64
PGh0bWw+PGhlYWQ+PG1ldGEgaHR0cC1lcXVpdj0iQ29udGVudC1UeXBlIiBjb250ZW50PSJ0ZXh0
L2h0bWw7IGNoYXJzZXQ9VVRGLTgiPjwvaGVhZD48Ym9keSA+PGRpdj5IaSBLeWxlLCZuYnNwOzwv
ZGl2PjxkaXY+V2UgbWF5IGhhdmUgc2VlbiBzb21ldGhpbmcgc2ltaWxhciBpbiB0aGUgcGFzdCBi
dXQgSSB0aGluayB0aGVyZSB3ZXJlIHZsYW5zIGludm9sdmVkLiZuYnNwOzwvZGl2PjxkaXY+SXMg
aXQgdGhlIHNhbWUgZm9yIHlvdT8mbmJzcDs8L2Rpdj48ZGl2PlRvbnkgLyBEYW4sIGRvZXMgaXQg
cmluZyBhIGJlbGw/Jm5ic3A7PC9kaXY+PC9ib2R5PjwvaHRtbD4=
----_com.android.email_640187878761650--
5 years, 9 months
Using the web-ui VM portal through a proxy failing
by Callum Smith
Dear oVirt Gurus,
Using the oVirt user VM portal seems to not work through the squid proxy setup (configured as per the guide). The page loads and login works fine through the proxy, but the asynchronous requests just hang. I've attached a screenshot, but you can see the "api" endpoint just hanging in a web inspector:
"https://proxyfqdn/ovirt-engine/api/"
[cid:CA42E493-3AD9-45F8-B4C3-C914F059390C@well.ox.ac.uk]
This works fine when not going through the proxy.
Is there a way to force noVNC HTML as the console mode through the web-ui, or at least have it as an option if not default?
The console seems not to work when logged in with a base 'user role'.
Regards,
Callum
--
Callum Smith
Research Computing Core
Wellcome Trust Centre for Human Genetics
University of Oxford
e. callum(a)well.ox.ac.uk<mailto:callum@well.ox.ac.uk>
5 years, 9 months
sun.security.validator
by suporte＠logicworks.pt
Hi,
I'm running Version 4.2.3.8-1.el7, and after reboot the engine machine no longer could login into administration portal with this error:
sun.security.validator.ValidatorException: PKIX path validation faile
java.security.cert.CertPathValidatorException: validity check failed
I'm using a self signed cert.
Any idea?
Thanks
--
Jose Ferradeira
http://www.logicworks.pt
5 years, 9 months
Ovirt cluster unstable; gluster to blame (again)
by Jim Kusznir
hi all:
Once again my production ovirt cluster is collapsing in on itself. My
servers are intermittently unavailable or degrading, customers are noticing
and calling in. This seems to be yet another gluster failure that I
haven't been able to pin down.
I posted about this a while ago, but didn't get anywhere (no replies that I
found). The problem started out as a glusterfsd process consuming large
amounts of ram (up to the point where ram and swap were exhausted and the
kernel OOM killer killed off the glusterfsd process). For reasons not
clear to me at this time, that resulted in any VMs running on that host and
that gluster volume to be paused with I/O error (the glusterfs process is
usually unharmed; why it didn't continue I/O with other servers is
confusing to me).
I have 3 servers and a total of 4 gluster volumes (engine, iso, data, and
data-hdd). The first 3 are replica 2+arb; the 4th (data-hdd) is replica
3. The first 3 are backed by an LVM partition (some thin provisioned) on
an SSD; the 4th is on a seagate hybrid disk (hdd + some internal flash for
acceleration). data-hdd is the only thing on the disk. Servers are Dell
R610 with the PERC/6i raid card, with the disks individually passed through
to the OS (no raid enabled).
The above RAM usage issue came from the data-hdd volume. Yesterday, I
cought one of the glusterfsd high ram usage before the OOM-Killer had to
run. I was able to migrate the VMs off the machine and for good measure,
reboot the entire machine (after taking this opportunity to run the
software updates that ovirt said were pending). Upon booting back up, the
necessary volume healing began. However, this time, the healing caused all
three servers to go to very, very high load averages (I saw just under 200
on one server; typically they've been 40-70) with top reporting IO Wait at
7-20%. Network for this volume is a dedicated gig network. According to
bwm-ng, initially the network bandwidth would hit 50MB/s (yes, bytes), but
tailed off to mostly in the kB/s for a while. All machines' load averages
were still 40+ and gluster volume heal data-hdd info reported 5 items
needing healing. Server's were intermittently experiencing IO issues, even
on the 3 gluster volumes that appeared largely unaffected. Even the OS
activities on the hosts itself (logging in, running commands) would often
be very delayed. The ovirt engine was seemingly randomly throwing engine
down / engine up / engine failed notifications. Responsiveness on ANY VM
was horrific most of the time, with random VMs being inaccessible.
I let the gluster heal run overnight. By morning, there were still 5 items
needing healing, all three servers were still experiencing high load, and
servers were still largely unstable.
I've noticed that all of my ovirt outages (and I've had a lot, way more
than is acceptable for a production cluster) have come from gluster. I
still have 3 VMs who's hard disk images have become corrupted by my last
gluster crash that I haven't had time to repair / rebuild yet (I believe
this crash was caused by the OOM issue previously mentioned, but I didn't
know it at the time).
Is gluster really ready for production yet? It seems so unstable to
me.... I'm looking at replacing gluster with a dedicated NFS server likely
FreeNAS. Any suggestions? What is the "right" way to do production
storage on this (3 node cluster)? Can I get this gluster volume stable
enough to get my VMs to run reliably again until I can deploy another
storage solution?
--Jim
5 years, 9 months
Backup & Restore
by suporte＠logicworks.pt
------=_Part_20329569_1409874801.1519819859027
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 7bit
Hi,
I'm testing backup & restore on Ovirt 4.2.
I follow this doc https://www.ovirt.org/documentation/admin-guide/chap-Backups_and_Migration/
Try to restore to a fresh installation but always get this error message:
restore-permissions
Preparing to restore:
- Unpacking file 'back_file'
Restoring:
- Files
Provisioning PostgreSQL users/databases:
- user 'engine', database 'engine'
Restoring:
FATAL: Can't connect to database 'ovirt_engine_history'. Please see '/usr/bin/engine-backup --help'.
On the live engine I run # engine-backup --scope=all --mode=backup --file=file_name --log=log_file_name
And try to restore on a fresh installation:
# engine-backup --mode=restore --file=file_name --log=log_file_name --provision-db --restore-permissions
Any Idea?
Thanks
--
Jose Ferradeira
http://www.logicworks.pt
------=_Part_20329569_1409874801.1519819859027
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><body><div style=3D"font-family: trebuchet ms,sans-serif; font-size: =
12pt; color: #000000"><div data-marker=3D"__QUOTED_TEXT__"><div style=3D"fo=
nt-family: Times New Roman; font-size: 10pt; color: #000000;" data-mce-styl=
e=3D"font-family: Times New Roman; font-size: 10pt; color: #000000;"><div>H=
i,<br></div><br><div><span style=3D"font-size: 11pt; font-family: terminal,=
monaco;" data-mce-style=3D"font-size: 11pt; font-family: terminal, monaco;=
">I'm testing backup & restore on Ovirt 4.2.</span><br></div><div><span=
style=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=
=3D"font-size: 11pt; font-family: terminal, monaco;">I follow this doc http=
s://www.ovirt.org/documentation/admin-guide/chap-Backups_and_Migration/</sp=
an><br></div><div><span style=3D"font-size: 11pt; font-family: terminal, mo=
naco;" data-mce-style=3D"font-size: 11pt; font-family: terminal, monaco;">T=
ry to restore to a fresh installation but always get this error message:</s=
pan><br></div><br><div><span style=3D"font-size: 11pt; font-family: termina=
l, monaco;" data-mce-style=3D"font-size: 11pt; font-family: terminal, monac=
o;">restore-permissions</span><br><span style=3D"font-size: 11pt; font-fami=
ly: terminal, monaco;" data-mce-style=3D"font-size: 11pt; font-family: term=
inal, monaco;">Preparing to restore:</span><br><span style=3D"font-size: 11=
pt; font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt; font=
-family: terminal, monaco;">- Unpacking file 'back_file'</span><br><span st=
yle=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=3D"f=
ont-size: 11pt; font-family: terminal, monaco;">Restoring:</span><br><span =
style=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=3D=
"font-size: 11pt; font-family: terminal, monaco;">- Files</span><br><span s=
tyle=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=3D"=
font-size: 11pt; font-family: terminal, monaco;">Provisioning PostgreSQL us=
ers/databases:</span><br><span style=3D"font-size: 11pt; font-family: termi=
nal, monaco;" data-mce-style=3D"font-size: 11pt; font-family: terminal, mon=
aco;">- user 'engine', database 'engine'</span><br><span style=3D"font-size=
: 11pt; font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt; =
font-family: terminal, monaco;">Restoring:</span><br><span style=3D"font-si=
ze: 11pt; font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt=
; font-family: terminal, monaco;">FATAL: Can't connect to database 'ovirt_e=
ngine_history'. Please see '/usr/bin/engine-backup --help'.</span><br></div=
><br><div><span style=3D"font-size: 11pt; font-family: terminal, monaco;" d=
ata-mce-style=3D"font-size: 11pt; font-family: terminal, monaco;">On the li=
ve engine I run # engine-backup --scope=3Dall --mode=3Dbackup --file=
=3Dfile_name --log=3Dlog_file_name</span></div><div><span style=3D"font-siz=
e: 11pt; font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt;=
font-family: terminal, monaco;"><br data-mce-bogus=3D"1"></span></div><div=
><span style=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-s=
tyle=3D"font-size: 11pt; font-family: terminal, monaco;">And try to restore=
on a fresh installation:</span><br></div><div><span style=3D"font-size: 11=
pt; font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt; font=
-family: terminal, monaco;"># engine-backup --mode=3Drestore --file=3Dfile_=
name --log=3Dlog_file_name --provision-db --restore-permissions</span></div=
><div><span style=3D"font-size: 11pt; font-family: terminal, monaco;" data-=
mce-style=3D"font-size: 11pt; font-family: terminal, monaco;"><br data-mce-=
bogus=3D"1"></span></div><div><span style=3D"font-size: 11pt; font-family: =
terminal, monaco;" data-mce-style=3D"font-size: 11pt; font-family: terminal=
, monaco;">Any Idea?<br data-mce-bogus=3D"1"></span></div><div><span style=
=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=3D"font=
-size: 11pt; font-family: terminal, monaco;"><br data-mce-bogus=3D"1"></spa=
n></div><div><span style=3D"font-size: 11pt; font-family: terminal, monaco;=
" data-mce-style=3D"font-size: 11pt; font-family: terminal, monaco;">Thanks=
<br data-mce-bogus=3D"1"></span></div><div><span style=3D"font-size: 11pt; =
font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt; font-fam=
ily: terminal, monaco;"><br data-mce-bogus=3D"1"></span></div><div><span st=
yle=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=3D"f=
ont-size: 11pt; font-family: terminal, monaco;"><br data-mce-bogus=3D"1"></=
span></div><br><div>-- <br></div><div><hr style=3D"width: 100%; height: 2px=
;" data-mce-style=3D"width: 100%; height: 2px;">Jose Ferradeira<br>http://w=
ww.logicworks.pt</div></div><br></div></div></body></html>
------=_Part_20329569_1409874801.1519819859027--
5 years, 11 months
